HAWLE - ZAK System. the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS.
|
|
- Amberlynn Short
- 5 years ago
- Views:
Transcription
1 HAWLE - System the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS.
2 HAWLE - System the threadless, restraint jointing system for service connections integrated in Pipe Saddles, Service Valves and Fittings PN 16 Thread additional Seal Incrustation Simple push into installation: rotate for 90 pull out fit the snap ring -sockets d -sockets d 46 for pipe drilling Ø 25 mm ISO-push fit from PE-pipes Ø 25 mm - Ø 50 mm for pipe drilling Ø 35 mm ISO-push fit from PE-pipes Ø 32 mm - Ø 63 mm 2 HAWLE
3 HAWLE - System Assembly Instructions 1 2 Grease the O-rings of the spigot end. Push the -spigot end into the -socket to the stop. Rotate the -Fitting for 90 clockwise to the stop 3 4 Pull out the - Fitting to the stop (approx. 4 mm) Fit the snap ring in the gap and push the locking ends together. HAWLE - System Dismantling Instructions Open the snap ring, widen it and pull it back. Push in the - Fitting to the stop (approx. 4 mm) Turn the -Fitting for 90 counterclockwise to the stop and pull it out of the -socket. HAWLE 3
4 -Service Valve with -Spigot and ISO Socket for lateral tapping -Service Valve with -Spigot and -Socket for lateral tapping No No DN PE pipe Ø mm H L t a c d 1 Weight ¾" , ,35 1" , ,50 1¼" , ,90 1½" , ,15 DN H L a c d1 Weight 1½" , ,00 DN PE pipe Ø mm H L t a c d 1 Weight 1¼" , ,00 1½" , ,30 2" , ,80 4 HAWLE
5 -Service Valve with -Spigot and ISO socket for vertical tapping No Service Valve 360 swivel type, with -Spigot and ISO socket for vertical tapping No Service Valve with -Spigot and -Socket for vertical tapping No DN PE pipe Ø mm H H 1 L ¾" " DN t a c d 1 Weight ¾" 52 10, ,30 1" 63 10, ,40 DN PE pipe Ø mm H H 1 L 1½" DN t a c d 1 Weight 1½" 76 10, ,85 DN H H 1 L 1½" DN a c d 1 Weight 1½" 10, ,90 DN PE pipe Ø mm H H 1 L 1¼" ½" DN t a c d1 Weight 1¼ 76 10, ,15 1½ 91 10, ,25 HAWLE 5
6 -HAKU Shut-off Saddle for lateral and vertical tapping of PE and PVC pipes -HAKU Pipe Saddle for lateral and vertical tapping of PE and PVC pipes No No. 5260, for pipe drilling Ø 25 mm Pipe Ø mm H L L , , , , , ,65, for pipe drilling Ø 35 mm Pipe Ø mm H L L , , , , ,70, for pipe drilling Ø 35 mm Pipe Ø mm H L L , , , , , , ,00 6 HAWLE
7 HA-WELD Fusion Saddle with -Socket of PE pipes -HAKU-Hawlinger for lateral and vertical tapping of PE and PVC pipes No No of PE 100 -Connection of brass No only for vertical tapping (without illustr.), for pipe drilling Ø 25 mm Pipe Ø mm H L L1 Weight , , , , , ,30, for pipe drilling Ø 35 mm Pipe Ø mm H L L1 Weight , , , , ,30, for pipe drilling Ø 25 mm, Dimensions No Pipe Ø mm H L L1 A B Weight , , , , , , ,10, for pipe drilling Ø 35 mm Pipe Ø mm H L L1 A B Weight , , , , , , ,90 HAWLE 7
8 -Universal Shut-Off Saddle for lateral and vertical tapping of DCI, Steel- and AC pipes No complete with straps and saddle seal No. 3810G without straps and saddle seal When ordering please state DN, pipe o.d. and pipe material -Universal Pipe Saddle for lateral and vertical tapping of DCI, Steel- and AC pipes No complete with straps and saddle seal No. 3540G without straps and saddle seal When ordering please state DN, pipe o.d. and pipe material, for pipe drilling Ø 25 mm Weight without strap Pipe Ø mm H L L ,50, for pipe drilling Ø 35 mm Weight without strap Pipe Ø mm H L L ,70, for pipe drilling Ø 35 mm Pipe Ø mm H L L ,00 8 HAWLE
9 -Universal-Hawlinger for lateral and vertical tapping of DCI, Steel- and AC pipes No complete with straps and saddle seal No. 2410G without straps and saddle seal When ordering please state DN, pipe o.d. and pipe material Strap with Saddle Seal inclusive grip pieces, washers and nuts for all -Saddles and -Hawlinger No DN When ordering please state DN, pipe o.d. and pipe material No only for vertical tapping (without illustr.) Weight without strap, for pipe drilling Ø 25 mm, Dimensiones No. 2410G DN H L L1 A B Weight ,70, for pipe drilling Ø 35 mm DN H L L1 A B Weight ,10 HAWLE 9
10 -ISO-Fittings for pe-pipes -Adaptor -Elbow swivel type -Elbow 90 PE tail No PE pipe Ø mm 20 0, , , , , , , , ,60 No PE pipe Ø mm 32 1, , , , , ,80 No PE pipe Ø mm 32 0, , , , , ,30 -Elbow 90 -PE tail -ISO fitting sliceable with detachable socket No PE pipe Ø mm 20 0, , , ,10 No PE pipe Ø mm 32 0, ,95 No PE pipe Ø mm 32 1, , , , , , , , , , , , , ,70 10 HAWLE
11 , accessories -Wall Inlet Fitting No Socket 46 / 1¼" int. - casing ribbed No Socket 46 / -Socket 46 - casing ribbed No Socket 46 / 1¼" int. - casing smooth Ø 62 mm -Elbow swivel type with -Spigot and -Socket 1¼" int. No No No Order No. Outlet A Outlet B Version L Socket 46 1¼" int. casing ribbed 500 5, Socket 46 -Socket 46 casing ribbed 500 5, Socket 46 1¼" int. casing smooth 500 3,80 No ,10 -Thread Adaptor -Socket - external thread with conical external thread with cylindrical external thread *) *) Cylindrical thread not suitable for usage with hemp or teflon. -Reduction -Spigot 46 -Socket -Plug for -adaptor No No No. 6980, for pipe drilling Ø 25 mm Thread L Weight L 1¼" 60 0, ,35 0,25 1½" 55 0,30, for pipe drilling Ø 35 mm Thread L Weight 0,45 1¼" 67 0,30 1½" 67 0,60 2" 50 0,40 HAWLE 11
12 -Connector with double sockets -Tee piece all socketed -Drilling adaptor for Hawle drilling machines No. 60 L ,00 No L ,40 H No , ,10 O-ring Securityring No No Illustrations, technical data, dimensions and weights are subject to alteration without notice. Your distributor: Art.-Nr. ZA Edition
General information Gate valves
General information Gate valves In 1957, Hawle invented the resilient-seated gate valve with multiple O-ring sealing of the valve spindle and had it patented. Today, this type of gate valve is the standard
More informationHAWLE-specification water
water GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN HAWLE - Epoxy Powder-Coating High quality corrosion
More informationHawle Haku PE Pipe Saddle
Hawle Haku PE Pipe Saddle Scan for more information Technical Guide W9.1 Specifically designed as a PE mechanical connection solution. Suitable for PE pipes of all pressure ratings up to PN 16. DN40-360.
More informationHAWLE-AIR RELEASE VALVES
HAWLE-AIR RELEASE VALVES HAWLE-AIR RELEASE VALVES Contents: Dimensions of Air Release Valve Page 2 Why use Air Release Valves? Page 3 Application: Potable water Air Release Valves, DN 1" - DN 2" Page 4
More informationHawle-FIT Fittings for PE pipes Page K 2/1 Assembly and dismantling instructions Page K 2/2
FITTINGS Page K 2 Hawle-FIT Fittings for P pipes Page K 2/1 Assembly and dismantling instructions Page K 2/2 Page K 3 Page K 4 ISO pipe fitting Fittings for P pipes Page K 3/1 ISO pipe fitting assembly
More informationFlange connections For PE pipes, restraint. For ductile iron pipes, standard, restraint. Flange connections For steel pipes, standard, restraint
FANGE ONNETIONS Page 2 Page 3 connections For PE pipes, restraint Synoflex flange System 2000 flange connections For PV pipes For A pipes Synoflex flange System 2000 flange Page 2/1 Page E 4/1 Page F 4/1
More informationGeneral lnstructions BAIO System
General lnstructions BAIO System For decades mainly flangeless components have been used for pipes and pipe fittings of buried supply lines, as this coupling system affords some technical and economic
More informationAir Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
More informationTHOMAS. PolyGrip Range. Couplings & Flange Adaptors Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Restrained Products PIPE PRODUCTS PolyGrip Range Restrained Couplings, Flange Adaptors, End Caps and Harnesses for HDPE and PVC Pipe D1 PolyGrip Range Application Fully
More informationPlast/Joint. The mechanical connection with unique one bolt system for plastic pipes d63 d315
Plast/Joint The mechanical connection with unique one bolt system for plastic pipes d63 d315 Plast/Joint >> Quick and efficient installation due to one bolt system >> Do you encounter repairs at difficult
More informationMARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationJUST PIPING, JUST FITTING. A Comprehensive Integrated Solution For Piping Systems
JUST PIPING, JUST FITTING A Comprehensive Integrated Solution For Piping Systems SF 01 DUCTILE IRON PIPE FITTINGS FD1011 FD1021 FD1022 FD1031 FD1102 FD1103 FD1111 FD1121 Double Flanged Piece Flanged spigot
More informationINSERTION Adaptor for analysis
INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion
More informationE2 valve - BAIO socket-socket For ductile iron, steel, PE and PVC pipes, PN 16 Page G 3/1
HAW - BAIO SYSTM The easy and time-saving solution Page G 2 HAW - BAIO SYSTM The fastest connection in the pipeline system Page G 2/1 Accessories Page G 2/2 Page G 3 2 valve - BAIO socket-socket For ductile
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationPIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
More informationFlangeless and Restraint Coupling System for Valves and Fittings
BAIO System Flangeless and Restraint Coupling System for Valves and Fittings For decades, flangeless components have been used for pipes and pipe fittings of buried supply lines because this coupling system
More informationGeneral Information Hydrants and Flushing Valves
General Information Hydrants and Flushing Valves Product Categories 4.1 Underground Hydrants 4-4 4.2 Above Gound Hydrants 4-10 4.3 Flushing Valves 4-13 www.hawle.de 4-3 4.1 Underground Hydrants www.hawle.de
More informationAUTOMATIC AIR VALVES For potable water
AUTOMATIC AIR VALVES For potable water Page N Air release valve Page N Air release valve avent Page N Air release valve DN 0 / DN 0, DN 150 / DN 00 Page N /1 Page N5 Combined air release valve Page N 5/1
More informationStandard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
More informationCOPRAX RANGE PIPES AND FITTINGS IN POLYPROPYLENE COP-RANDOM COPRAX. Comércio e Indústria do Plástico, Lda. AV. 16 DE MAIO Z.I.
COPRAX Comércio e Indústria do Plástico, Lda. AV. 16 DE MAIO Z.I. OVAR 3880 102 OVAR - PORTUGAL T +351 256 579 480 F +351 256 579 489 export@coprax.com www.coprax.com PIPES AND FITTINGS IN POLYPROPYLENE
More informationVERSION 2. PVC FITTINGS & VALVES Technical Catalogue
VERSION 2 PVC FITTINGS & VALVES Technical Catalogue INTRODUCTION Plasson s innovative products revolutionized the way of connecting polyethylene pipes in the 1960 s. We started with fittings for agricultural
More informationMULTI/JOINT. One size fits and grips all End-load resistant - Flexible DN50 - DN600
MULTI/JOINT One size fits and grips all End-load resistant - Flexible DN50 - DN600 1 MULTI/JOINT FITTINGS large tolerance fittings It means that pipes that can be fitted may have different diameters, with
More informationTEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More informationFittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use
Fittings and Accessories For oil and grease. For Centralized ubrication Systems and General Use Fittings and Accessories This brochure provides an overview of metallic pipe unions for luid engineering.
More informationMULTI/JOINT 3000 Plus. The connection for all pipe diameters Restraint Non restraint DN50 DN400. Georg Fischer Waga N.V.
MULTI/JOINT 3000 Plus The connection for all pipe diameters Restraint Non restraint DN50 DN400 Georg Fischer Waga N.V. DAS ORIGINAL EL ORIGINAL HET ORIGINEEL THE ORIGINAL MULTI/JOINT 3000 Plus >> Wide
More informationA type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
More informationFittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
More informationChapter 1 Pipes and fittings PVC - PE
Chapter 1 Pipes and fittings PVC - PE Solvent weld fittings Threaded connections Ball valves & butterfly valves Page 1-20 Page 21-33 Page 34-37 Slide valves & check valves Solvents & sealants Tools Page
More informationJULY Polyethylene Piping Systems.
JULY 205 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationTHOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally
More informationfor plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More informationi butt weld spigot i flanged end acc. to DIN PN 10 / 16
body material PVC-U PVC-C PP PVDF ball seat PTFE other seats iepdm ifpm i *) working temperature 0 C to 50 C 0 C to 90 C -20 C to 80 C nominal size DN to DN connection with pipe legth acc. to EN 558-1
More informationNOTE: Please ask James Hardie on for delivery timeframes and terms and conditions. STORMWATER PIPES & FITTINGS
Description James Hardie manufactures an extensive range of fittings which are intended to provide maximum flexibility in the design and installation of stormwater drainage systems. Application As an integral
More informationROMACON COUPLINGS AND FLANGE ADAPTORS
ROMACON COUPLINGS AND FLANGE ADAPTORS Couplings DN mm DN inches Range Romafit Weight kg 50 2 59-73 3,8 65 2,5 72-85 4,3 80 3 88-103 4,5 100 4 108-128 5,6 125 5 132-146 6,8 125 5 139-153 6,9 150 6 159-182
More informationDimensional Data Nesting Chart Earthwool
Nesting Chart CI-PE-NC 12-1 Dimensional Data Nesting Chart Earthwool 1000 Insulation 22 Dimensional Data Nesting Chart Insulation O.D. Single Layer Dimensional Data ½" 1" 1½" 2" 2½" 3" 3½" 4" 4½" " 6"
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More informationSempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
More informationIRECO FITTINGS IN BRASS SERIES - FOR PLASTIC PIPES FOR ISO PIPES FROM DIAMETER 20 TO 63
11/17 0800 DESCRIPTION The IRECO 800 series compression fittings with EPDM elastomer ring washer have been conceived, designed and manufactured for plastic piping used for transporting fluids under pressure.
More informationEarthwool 1000 Pipe Insulation
Nesting Chart CI-PE-NC 12-1 Earthwool 1000 Pipe Insulation Dimensional Data Nesting Chart Single Layer Insulation O.D. Single Layer Dimensional Data Pipe Size ½" 1" 1½" 2" 2½" 3" 3½" 4" 4½" " 6" ½" 0.840"
More informationDuctile Iron. Fittings and Accessories for pressure pipelines. 1 st issue
Ductile Iron Fittings and Accessories for pressure pipelines 1 st issue INTRODUCTION Tawakol Metal Industries is Egypt's main manufacturer of Grey and Ductile Cast Iron products since 1975. TMI's reputation
More informationTHOMAS. Ultra Saddles & Tees. Tap In Products PIPE PRODUCTS. Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps
THOMAS PIPE PRODUCTS Tap In Products Ultra Saddles & Tees Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps E1 Ultra Saddles & Tees Overview For a Permanent and Simple Tap In Solution for
More informationTable of contents. Chapter 1: Fusiotherm. Chapter 4: climasystem Produktgruppe 20. Chapter 5: aquatherm. Chapter 2: aquatherm SHT.
Table of contents Chapter 1: Fusiotherm 01 Fusiotherm -pipe 04 climatherm-pipe & aquatherm-lilac 07 Accessories 09 Fittings 15 Weld-in saddle 19 Threaded connections and accessories 22 Transition pieces
More informationFLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR
FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR Bortek Pipe Coupling Systems info / order by mail bortek@bortek.com.tr info / order by Fax +90 / 212 876 55 26 info / order
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationN086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
More informationPVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationd z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
More informationINSERTION flow sensor for continuous flow measurement
INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)
More informationAir operated Pinch Valve type VMC
Air operated Pinch Valve type VMC Flange Internal Thread Tri-Clamp Weld-on ends Threaded spigot The flexible modular system for detachable and aseptic piping connections! The ideal solution for isolation
More information3 way ball valve S4 hand operated
General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationSempell High Pressure Stop Valves Model VA500 (DIN)
Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features Type tested (except for material
More informationTHOMAS. Low Pressure SS Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Low Pressure SS Couplings Couplings for Structured Wall HDPE Pipe & Low Pressure Applications G1 COUPLINGS & FLANGE ADAPTORS - NON
More informationTOOLS NEEDED FOR REPAIR OF MK 14
150 200 250 USE NO OIL 100 00 50 50 psi 00 MADE IN THE USA R Special Tools P/N 1-07-000 MK 1 Repair and Maintenance Guide FOR REPAIR OF MK 1 Quantity Part Number Description 2.00.127 Field handle 1 set.00.017
More informationPLASTICA ALFA. Compression. Fittings. Pipe Saddles. For use. with. Polyethylene. Pipe PRODUCT CATALOGUE PROUDLY IMPORTED BY.
Compression PRODUCT CATALOGUE Fittings & Pipe Saddles For use with Polyethylene Pipe DPI Trading PROUDLY IMPORTED BY www.dpitrading.co.za www.incledon.co.za Technical Information Body: black polypropylene
More informationINOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
More informationGVK Series (Steam-to-Steam) Clean Steam Generators
Page 1 of 5 TI-P486-03 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 GVK Series (Steam-to-Steam) Clean Steam Generators Description Unfired clean steam generators with 'U' type extractable tube bundle and
More informationPressure reduction controllers (PN 25) AVDS - for steam AVD - for water
Data sheet Pressure reduction controllers (PN 25) - for steam AVD - for water Description Main data AVD: DN 15-50 k VS 0,4-25 m 3 /h PN 25 Setting range: 1-5 bar / 3-12 bar Temperature: - Circulation water/glycolic
More informationINSERTION Adapter/Fitting for analytical devices
INSERTION / for analytical devices Universal adapter/fitting for Type 8202 and 8222 measuring devices in pure, aggressive or polluted liquids Adaptation into standard piping systems or conversion of Bürkert
More informationStirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
More informationFactory address: Mola sadra st., Abooreyhan st Eshtehard Industrial Town, TEHRAN/ IRAN
z d Le mm equiv inch Le r 1) z z Le L 110 5 2 5 5 8 2 Elbow d 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
More informationFlow controller (PN 25) AVQ - return and flow mounting
Data sheet Flow controller (PN 5) - return and flow mounting Description is a self-acting flow controller primarily for use in district heating systems. The controller closes when set max. flow is exceeded.
More informationALUMINUM & STEEL CAR CARRIERS
OWNER'S MANUAL ALUMINUM & STEEL CAR CARRIERS INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural
More informationdisplay on the wall or in a panel away from the inline sensor SE30 for easy meter reading.
Analogue Flow Rate Indicator, DN 15...; PN 1...16 Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a large
More informationSuper-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
More informationPush-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented
Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented PE-100 / PVC-U pull-out resistant long type Push-Fit Transition Coupling for PE-100 and PVC-U water pipes up to 16 bar d90
More informationMaxiFit. High Tolerance Mechanical Pipe Fittings. World leaders in pipe joint, repair & flow control products
World leaders in pipe joint, repair & flow control products The Viking Johnson range of MaxiFit universal pipe couplings represents the very latest in mechanical pipe coupling technology. MaxiFit products
More informationMessing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationInstallation and Operating Instructions
Original Installation and Operating Instructions Hawle E2 Valve with Flange Outlet, System 2000 or PE Spigot Ends Table of Contents A) General...... 2 A1 Symbols..... 2 A2 Intended use... 2 A3 Labeling...
More information800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationSIKA Flow Switches -1-
SIKA Flow Switches -1- SIKA Flow Switches Reliable Safe Proven! Our tried-and-tested flow monitoring switches are used for two basic purposes: To ensure a minimum flow rate, e.g. of cooling water or lubricating
More information2 way ball valve S4 with integrated Praher Labeling System
Praher Plastics Austria GmbH DB/EN/DEEN///33 Technische Änderungen vorbehalten! way ball valve S4 Symbol photo Safety locking handle system This document does not constitute a guarantee, it is for initial
More informationin stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
More informationSOLDER RING FITTINGS GENERAL RANGE
Product Guide Size Pk Pk Code SOLDER RING FITTINGS GENERAL RANGE Fittings are manufactured from and alloy Available in sizes from 8-4mm Fittings are designed for jointing tubes to BS EN 7 in hot and cold
More informationDiaphragm valve T4 [hand operated]
Praher Kunststofftechnik GmbH DB/EV/DEEN/4/0/95A Subject to technical modifications! General: Body material: Seals: Diaphragm: Dimensions: Connections: -U, PP, PVDF EPDM, FPM EPDM, EPDM/PTFE DN5 DN5 d0
More informationDura Gas Butterfly Valve
Dura Gas Butterfly Valve Specifications Recommended use The Dura butterfly valve is a soft sealing valve for installation with flanges drilled in accordance with AS 2129 Table E. Engineered for longterm,
More informationFlow switches for insertion installation
Flow switches for insertion installation Threaded adapter with trimmable paddle Type VHS06 Type VK306 Technical data VHS06 VK306 Switching function Contact closes at increasing flow opens at decreasing
More informationInstallation guide water switch including filter. Before installing read this guide first
Installation guide water switch including filter Before installing read this guide first Contents of the pack 1. Bracket, water filter, two tubes and mounting package 2. Switch handle, switch body and
More informationPressure relief controller AVA (PN 25)
Data sheet Pressure relief controller AVA (PN 25) Description AVA is a self-acting pressure relief controller primarily for use in district heating systems. The controller is normally closed and opens
More informationINDUSTRIAL VACUUM SYSTEMS MADE AND MANUFACTURED IN GERMANY RANGE OF ACCESSORIES COMPETENCE CENTRE INDUSTRIAL VACUUMING. Valid from
INDUSTRIAL VACUUM SYSTEMS MADE AND MANUFACTURED IN GERMANY Valid from 01.01.2019 COMPETENCE CENTRE INDUSTRIAL VACUUMING 2 3 DEAR CUSTOMER, This catalogue provides you with an essential selection of the
More informationHDPE PIPE SYSTEMS PRODUCT CATALOGUE.
HDPE PIPE SYSTEMS PRODUCT CATALOGUE www.acu-tech.com.au This is to certify that: The Trustee for The Morren Family Trust ABN 52 394 633 042 Trading As Acu-Tech Piping Systems 119 Kelvin Road Maddington
More informationTABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
More informationTechnical Data. Sizes 2 in. to 24 in. (DN50 to DN600) Approvals UL and ULC Listed FM Approved
Worldwide Contacts www.tyco-fire.com Model TJP Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator General Description TYCO Model TJP Resilient-Seated Gate Valves with Vertical and
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationAdvanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
More informationTHOMAS. G-Flex Install Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS. Fully Rubber Lined Flexible Couplings
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS G-Flex Install Couplings Fully Rubber Lined Flexible Couplings E1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED VAAL DAM - Gauteng
More informationInsertion magnetic inductive flowmeter
Insertion magnetic inductive flowmeter Sensor without moving parts Flowmeter with On/Off control Application related calibration by Teach-In function Clean in place (CIP) FDA-compliant materials Type 8041
More informationpiece of straight pipe with a minimum length of 25 cm. (see figure 13) For this purpose the 45 long bend is included in the Wavin AS program.
Recommendations 3.9 Sound insulation recommendations National / Local building regulations should be observed where applicable. In order to achieve optimal sound insulation it is highly recommended to
More informationFLOW SWITCHES AND COMBINATION CONTROLS
6 ULTIMHEAT FLOW SWITCHES AND COMBINATION CONTROLS The professional solution: an extended, rational, and consistent range of products Technical catalogue for R&D department Edition 28/05/2013 E-Mail :
More information2018/04. Manual Filler Pumps for Grease Guns and Accessories. Grease Gun Filler Pump ecofill-standard. Grease Gun Filler Pump ecofill-deluxe
Manual Filler Pumps for Grease Guns and Accessories Description Images and specifications can be subject to change without notice Part No. Grease Gun Filler Pump ecofill-standard Grease transfer pump includes
More informationMAINTENANCE PROCEDURE FOR MK18/MK16
MAINTENANCE PROCEDURE FOR MK18/MK16 MK16/MK18-1/1- MAINTENANCE PROCEDURE FOR MK 16 / 18 1 ST STAGES WARNING: this maintenance procedure is only for appointed Scubapro technicians that followed a complete
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More informationIllustrated Parts List for VMAC System V90G136 Ram Cab & Chassis with PTO PREP 6.7L Cummins Diesel
Illustrated Parts List for VMAC System V90G136 Ram 2015+ 3500-5500 Cab & Chassis with PTO PREP 6.7L Cummins Diesel 1. Kit Pack List... 2 2. Fastener Pack, 3801037... 6 3. Compressor Assembly, P120148...
More informationInstallation Fittings
PVC TEES SCH 80 - Fitting only Part No. Code Size L H i.d. PV8T005F 159 000 527 0.50 in. 3.75 3.6 0.85 PV8T007F 159 000 529 0.75 in. 3.75 3.8 1.06 PV8T010F 159 000 531 1.00 in. 4.26 4.0 1.33 PV8T012F 159
More information