Installation Fittings
|
|
- Chastity Darlene Miles
- 5 years ago
- Views:
Transcription
1 PVC TEES SCH 80 - Fitting only Part No. Code Size L H i.d. PV8T005F in PV8T007F in PV8T010F in PV8T012F in PV8T015F in PVC TEES SCH 80 - with Pipe* PVC Clamp-on Saddles SCH 80 CPVC Tees SCH 80 - Fitting only Part No. Code Size L H o.d. PV8T in PV8T in PV8T in PV8T in PV8T in PV8T in PV8T in PV8T in PV8T in *Pipe lengths included with these fittings do not satisfy straight-run requirements for all installation configurations. Part No. Code Size L H d C PV8S in PV8S in PV8S in PV8S in PV8S in PV8S in Mounts on PVC pipe EPDM O-ring Part No. Code Size L H i.d. CPV8T005F in CPV8T007F in CPV8T010F in CPV8T012F in CPV8T015F in Installation Tips: Using the Signet fittings will ensure that the sensors: Meet printed specifications Insert to proper depth into the pipe Install easily and quickly CPVC Tees SCH 80 - with Pipe* Part No. Code Size L H o.d. CPV8T in CPV8T in CPV8T in CPV8T in CPV8T in *Pipe lengths included with these fittings do not satisfy straight-run requirements for all installation configurations
2 BSP PVC-U Tee Fittings BSP PVC-U Saddle Fittings Part No. Code Size H H1 L L1 d PVAT in PVAT in PVAT in PVAT in PVAT in PVAT in FPM O-ring These fittings are only available from your local George Fischer sales office Part No. Code Size D H H1 L d PVAS in PVAS in PVAS in EPDM Gasket These fittings are only available from your local George Fischer sales office Choosing Multi-Parameter Instrument Flow ph/orp Conductivity/ Resistivity Temperature, Pressure, Level PP Clamp-On Saddle Fittings Part No. Code Size L H o.d. c PPS in PPS in Buna Nitrile O-ring Other Wiring & Installation Technical Reference PVC Glue-On Saddle Fittings SCH 80 Part No. Code Size W H o.d. C PV8S in PV8S in Temperature/ Pressure Graphs Glossary Part No. of Terms Reference Index 163
3 Carbon Steel Threaded Tees with NPT Threads Part No. Code Size L H (NPT) CS4T in CS4T in CS4T in CS4T in CS4T in CS4T in PVDF insert - all sizes For use with SCH 40 metal pipe(astm) Copper Sweat-on Tee with PVDF insert Part No. Code Size L H i.d. CUKT in CUKT in CUKT in CUKT in CUKT in CUKT in No insert up to 1 in., over 1 in. - PVDF insert For use with copper pipe (SCH K) Galvanized Iron Threaded Tee with NPT Threads and PVDF insert Part No. Code Size NPT L H IR4T in IR4T in IR4T in IR4T in PVDF insert - all sizes For use with SCH 40 metal pipe (ASTM) 316 SS (1.4401) Threaded Tees with NPT Threads with PVDF insert Part No. Code Size L H (NPT) CR4T in CR4T in CR4T in CR4T in CR4T in CR4T in PVDF insert - all sizes For use with SCH 40 metal pipe (ASTM) Brass Threaded Tee with NPT Threads and PVDF insert Part No. Code Size NPT L H BR4T in BR4T in BR4T in BR4T in PVDF insert - all sizes For use with SCH 40 metal pipe (ASTM) 164
4 Carbon Steel Weld-on Weldolets Part No. Code Size H W C CS4W in CS4W in CS4W in CS4W in CS4W in CS4W in CS4W in CS4W in Up to 8 in. - PVDF insert, over 8 in. - PVC insert For use with SCH40 metal pipe (ASTM) Choosing Multi-Parameter Instrument Flow ph/orp Brass Brazolet with PVDF insert Part No. Code Size W H C BR4B in BR4B in BR4B in BR4B in BR4B in BR4B in BR4B in BR4B in Up to 8 in. - PVDF insert, over 8 in. - PVC insert For use with copper pipe (SCH 40 ASTM) 316 SS (1.4401) Weldolets with PVDF insert Part No. Code Size W H C CR4W in CR4W in CR4W in CR4W in CR4W in CR4W in CR4W in CR4W in Up to 8 in. - PVDF insert, over 8 in. - PVC insert For use with SCH 40 metal pipe (ASTM) Iron Strap-on Saddle Part No. Code Size H o.d. o.d. C min max IR8S in IR8S in IR8S in IR8S in IR8S in IR8S in IR8S in IR8S in IR8S in Up to 8 in. - PVDF insert, over 8 in. - PVC insert Buna Nitrile O-ring For use with SCH 80 metal pipe (ASTM) 165 Conductivity/ Resistivity Temperature, Pressure, Level Other Wiring & Installation Technical Reference Temperature/ Pressure Graphs Glossary Part No. of Terms Reference Index
5 Fiberglass Glue-on Tees Part No. Code Size L H i.d. FPT in FPT in PVDF insert - all sizes Fiberglass Glue-on Saddles Part No. Code Size L H o.d. C FPS in FPS in FPS in FPS in FPS in FPS in Up to 8 in. - PVDF insert, over 8 in. - PVC Mounts on fiberglass pipe JIS PVC-U Tee Fittings EPDM FPM DN H H1 L L1 d mm mm mm mm mm mm Choice FPM or EPDM O-ring These fittings are only available from the George Fischer sales office in Japan. Appearance varies in DN 15mm JIS PVC-U Tee Fittings (Flange Type) Code DN D DF DP L D L DF DP mm mm mm mm mm mm mm These fittings are only available from the George Fischer sales office in Japan
6 Metalex Socket Weld Mini-Tap (1.4401) L Part No. Code Size L W H i.d. P in P in P in For use with SS pipe Choosing Multi-Parameter Instrument Flow i.d. W H ph/orp Metalex Weld-On Mini-Tap (1.4401) Part No. Code Size W H C P in P in P in P in P in P in P in P in P in P in P in For use with SS pipe Gasket Klinger C4401 Thermoseal Metalex Strap-On Saddle (1.4401) Part No. Code Size H W o.d. o.d. min. max. P in P in P in P in P in P in P in P in P in Buna Nitrile O-ring Conductivity/ Resistivity Temperature, Pressure, Level Other Wiring & Installation Technical Reference Temperature/ Pressure Graphs Glossary Part No. of Terms Reference Index 167
7 Metric PVC-U Tee Fittings Part No. Code DN H H1 L L1 d PVMT mm PVMT mm PVMT mm PVMT mm PVMT mm PVMT mm FPM O-ring These fittings are only available from your local George Fischer sales office Metric PP Union Tee Fittings Part No. Code DN L H d PPMT mm PPMT mm PPMT mm PPMT mm PPMT mm PPMT mm Socket fusion equipment is required to install PVDF and PP union tees. FPM O-rings Metric PVDF Union Tee Fittings Part No. Code DN L H d SFMT mm SFMT mm SFMT mm SFMT mm SFMT mm SFMT mm Socket fusion equipment is required to install PVDF and PP union tees. FPM O-rings Metric PVC-U Saddle Fittings Part No. Code DN D H H1 L d PVMS mm PVMS mm PVMS mm PVMS mm PVMS mm EPDM Gasket These fittings are only available from your local George Fischer sales office 168
8 ABS CoolFit TM Code DN d L H Z D DN DN DN DN DN Please contact your local George Fischer sales office for availability. Code DN d L H Z D Black pipe (shown) DN DN DN DN DN White pipe DN DN DN DN DN For use only with George Fischer CoolFit systems and with Signet 515 Flow Sensor. Please contact your local George Fischer sales office for availability. Choosing Multi-Parameter Instrument Flow ph/orp Conductivity/ Resistivity Temperature, Pressure, Level Other Wiring & Installation Technical Reference Temperature/ Pressure Graphs Glossary Part No. of Terms Reference Index 169
9 Fitting Insert Reference Ordering Notes: 1) If insert is intended for use with Signet installation fittings, specify fitting part number at the time of purchase. 2) If insert is not for use with Signet installation fittings, specify the following at the time of purchase: Outside diameter (o.d.) of pipe Thickness of pipe Dimension from top of pipe to top of installation fitting when installed. Fitting Accessories Insert Part No. Code Description Pipe Adapter Insert, PVDF P C Pipe Adapter Insert, CPVC P P Pipe Adapter Insert, PVC Pipe Adapter Insert Pipe Adapter Insert P Sensor Plug, Polypro P Sensor Plug, PVDF P Insert, PVDF 1.5 in. Brazolet Fittings Fitting Part No. BR4B025 BR4B030 BR4B040 BR4B050 BR4B060 BR4B080 BR4B100 BR4B120 Tee Fittings BR4T010 BR4T012 BR4T015 BR4T020 Insert Part No. Description Tee, Brass Tee, Brass Tee, Brass Tee, Brass CUKT005 CUKT007 CUKT010 CUKT012 CUKT015 CUKT020 CR4T005 CR4T007 CR4T010 CR4T012 CR4T015 CR4T020 CS4T005 CS4T007 CS4T010 CS4T012 CS4T015 CS4T020 FPT015 FPT020 P P Tee, Fiberglass Tee, Fiberglass FOR YOUR SAFETY: Always confirm the chemical compatibility and the maximum pressure/temperature specifications for fitting and sensor selection prior to purchase. Failure to do so may result in property damage and/or serious personal injury
10 Ordering Notes: 1) If insert is intended for use with Signet installation fittings, specify fitting part number at the time of purchase. 2) If insert is not for use with Signet installation fittings, specify the following at the time of purchase: Outside diameter (o.d.) of pipe Thickness of pipe Dimension from top of pipe to top of installation fitting when installed. Fitting Insert Reference Tee Fittings Fitting Part No. Description Insert Part No. IR4T010 Tee, Iron IR4T012 IR4T015 IR4T020 Tee, Iron Tee, Iron Tee, Iron Weldolet Fittings CR4W025 CR4W030 CR4W040 CR4W050 CR4W060 CR4W080 CR4W100 CR4W120 CS4W025 CS4W030 CS4W040 CS4W050 CS4W060 CS4W080 CS4W100 CS4W120 Saddle Fittings FPS030 FPS040 FPS060 FPS080 FPS100 FPS120 IR8S020 IR8S025 IR8S030 IR8S040 IR8S050 IR8S060 IR8S080 IR8S100 IR8S120 PPS100 PPS120 PV8S020 PV8S025 PV8S030 PV8S040 PV8S060 PV8S080 PV8S100 PV8S V Clamp-on Fitting, PP 12 Clamp-on Fitting, PP 10 Glue-on 12 Glue-on Choosing Multi-Parameter Instrument Flow ph/orp Conductivity/ Resistivity Temperature, Pressure, Level Other Wiring & Installation Technical Reference Temperature/ Pressure Graphs Glossary Part No. of Terms Reference Index 171
SIGNET Installation Fittings
Fiberglass Glue-on Saddles Part no. ode Size FPS030 159 000 441 3.00 in. 5.9 4.5 3.50 1.44 FPS040 159 000 442 4.00 in. 8.0 4.5 4.50 1.44 FPS060 159 000 443 6.00 in. 8.0 6.5 6.62 2.25 FPS080 198 801 417
More informationK-Factor. Global Installation Fittings and K-Factors. Global
K-Factor Global Installation Fittings an K-Factors Global K-Factor CD Table of Contents 5 6 7 8 13 14 21 22 27 28 35 36 37 38 39 40 47 48 49 50 51 52 59 60 61 62 63 64 65 66 67 68 79 80 81 82 83 84 91
More informationSignet 515/2536 Rotor-X Flow Sensors * * Operating Instructions. English. Description Rev. X 05/17
English Signet 515/2536 Rotor-X Flow Sensors *3-0515.090* 3-0515.090 Rev. X 05/17 Operating Instructions 515 Sensor (with red cap) 2536 Sensor (with blue cap) 8510 Integral Sensor 8512 Integral Sensor
More informationGF Signet. Measurement & Control Sensors. Signet Price List 1st Aug 2011 Rev 0.0
GF Signet Measurement & Control Sensors Sensors and Transmitters: Flow ph Conductivity ORP Level Pressure Temperature Turbidity Chlorine Installation fittings Power supplies Calibration solutions Accessories
More information* * Rev M 10/14 Operating Instructions
English Signet 55 Blind Magmeter *-55.090* -55.090 Rev M 0/ Operating Instructions Description The Signet 55 Magmeter is an insertion-style magnetic flow sensor. The patented sensor design is available
More information* * Rev /18 Operating Instructions
English Signet 255 Blind Magmeter *-2552.090* -255.090 Rev. 6 07/8 Operating Instructions Description The Signet 255 Magmeter is an insertion-style magnetic flow sensor. The patented sensor design is available
More informationSignet 8150 Flow Totalizer
English Signet 8150 Flow Totalizer *3-8150.090-1* 3-8150.090-1 Rev. K 9/14 English Operating Instructions Description The Signet 8150 Flow Totalizer is a battery-powered instrument capable of providing
More informationINSERTION Adaptor for analysis
INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion
More informationHydro-Flow 2300 Fixed Insertion Vortex Flow Meter
Hydro-Flow 2300 Fixed Insertion Vortex Flow Meter Description The Hydro-Flow Model 2300 insertion vortex flow meter was designed specifically for water flow measurement, containing no moving parts like
More informationSignet 515 Rotor-X Paddlewheel Flow Sensors
Signet 515 Rotor-X Paddlewheel Flow Sensors Features Operating range 0.3 to 6 m/s (1 to 20 ft/s) Wide turndown ratio of 20:1 Highly repeatable output Simple, economical design Installs into pipe sizes
More informationHydro-Flow Model 2300 Installation and Operation Guide B
Hydro-Flow Model 2300 Installation and Operation Guide 5700508-B Contents: Understanding and Identifying Your Flow Meter 1 Installing Your Flow Meter 3 Electrical Connections.. 7 Mechanical and Electrical
More information3 way ball valve S4 hand operated
General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN
More information2100 Turbine Flow Sensor
200 Turbine Flow Sensor Description Engineered specifically for small pipe diameter applications, the Signet 200 Turbine Flow Sensor provides accurate readings in two flow ranges: 0.3 to 3.8 lpm and 3
More informationPipe Nipples / Solvent Cement / Pipe Clips 11. Diaphragm Valves / Knife Gate Valves 21
TABLE OF CONTENTS Pipe Sizing 1 Pipe 2 Tee s 3 Elbows 4 Couplings 5 Adaptors, Caps & Plugs 6 Unions 7 Reducer Bushing 8 Wye s / Clamp on Saddles 9 Flanges 10 Pipe Nipples / Solvent Cement / Pipe Clips
More informationGeneral Service Gaskets and Specialty Gaskets
General Service Gaskets and Specialty Gaskets Universal FPM Gasket...2-1 Universal EPDM Gasket...2-2 EPDM Socket Fusion Ring Gasket...2-3 EPDM Fiberglass Reinforced Plastic Ducting Gasket...2-4 Gasket
More informationCorrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases
Corrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases Rotameters Markets/Applications George Fischer rotameters are ideally suited for a multitude of corrosive and
More informationSignet 7000/7001 Vortex Flow Sensors * *
DN X DN X DN X DN X DN X DN X DN X Signet 7000/7001 Vortex Flow Sensors *3-7000.090* 3-7000.090 Rev. F 10/05 English English 1. Mounting Location... 1 2. Installation... 1 3. Wiring Preparation... 2 4.
More informationSignet 515 Rotor-X Paddlewheel Flow Sensors
Signet 515 Rotor-X Paddlewheel Flow Sensors Features Operating range 0.3 to 6 m/s (1 to 20 ft/s) Wide turndown ratio of 20:1 Highly repeatable output Simple, economical design Installs into pipe sizes
More informationMeasurement and Instrumentation
15 Measurement and Instrumentation Use the postcard included in this handbook or call (800) 854-4090 to order the complete Instrumentation Catalog or visit www.gfsignet.com for detailed product information.
More informationSIGNET Vortex Flow Sensors ENGLISH
DN X DN X DN X DN X DN X DN X DN X SIGNET Vortex Flow Sensors ENGLISH 37000.090 C12/00 English 1. Mounting Location... 1 2. Installation... 1 3. Wiring Preparation... 2 4. Wiring Options Frequency Output
More informationType 543. Three-way Ball Valve
Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,
More informationSignet 2536 Rotor-X Paddlewheel Flow Sensors
Signet 2536 Rotor-X Paddlewheel Flow s Features Operating range 0.1 to 6 m/s (0.3 to 20 ft/s) Wide turndown ratio of 66:1 Open-collector output Highly repeatable output Simple, economical design PVC (gray
More informationType Electrically Actuated Ball Valve
GF Piping Systems Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement
More informationSignet 3719 ph/orp Wet-Tap
Signet 3719 ph/orp Wet-Tap *3-3719.090* 3-3719.090 Rev H 09/07 English Do not exceed maximum temperature/pressure specifications. Wear safety goggles or face shield during installation/service. Do not
More informationType 561/562 Cone Check Valve
Type 561/562 Cone Check Valve Standard Features Size 3/8 4 Material Body: PVC, CPVC, PROGEF Standard, Polypropylene, SYGEF PVDF, ABS Spring (562 only): Stainless Steel Optional: Nimonic C/Hastelloy C,
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationdisplay on the wall or in a panel away from the inline sensor SE30 for easy meter reading.
Analogue Flow Rate Indicator, DN 15...; PN 1...16 Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a large
More informationAutomation Made Easy 2013 Signet Measurement and Control Product Catalog
Multi-Parameter Chlorine Dissolved Oxygen Turbidity Flow ph/orp Conductivity/Resistivity Temperature Pressure Level Automation Made Easy 2013 Signet Measurement and Control Product Catalog Automation Made
More informationSignet 2517 Brass Paddlewheel Flow Sensor * *
Signet 2517 Brass Paddlewheel Flow Sensor -250.090 English -2517.090 Rev. F 11/06 English SAFETY INSTRUCTIONS 1. Do not remove from pressurized lines. 2. Do not exceed maximum temperature/pressure specifi
More informationDistributed By Aetna Plastics Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General Size: ½ 2 Material: PVC, CP
Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM,
More informationFMK-2536, FP-5100, FP-5300,FP-5600, FP-8500, FP-8500A
User s Guide Shop online at omega.com SM e-mail: info@omega.com For latest product manuals: www.omegamanual.info SERIES: FMK-2536, FP-5100, FP-5300,FP-5600, FP-8500, FP-8500A Paddlewheel Flow Sensors omega.com
More information2 way ball valve S4 with integrated Praher Labeling System
Praher Plastics Austria GmbH DB/EN/DEEN///33 Technische Änderungen vorbehalten! way ball valve S4 Symbol photo Safety locking handle system This document does not constitute a guarantee, it is for initial
More informationSIGNET 2750 ph/orp Sensor ENGLISH
ENGLISH 3-2750.090 B-8/01 English SAFETY INSTRUCTIONS FOR IN-LINE ELECTRODE INSTALLATION 1. Do not remove from pressurized lines. 2. Do not exceed maximum temperature/pressure specifications. 3. Wear safety
More informationHVAC Products 2016 EDITION NCI CANADA INC.
HVAC Products 2016 EDITION NCI CANADA INC. YOUR SINGLE SOURCE SOLUTION NCI Canada Inc. is a Canadian National master distributor of high quality valves, fittings, pipes and related products serving residential,
More informationRotameters. Variable Area Flow Meters
Variable Area Flow Meters Rotameters General Size: ⅜ 2½ Total Flow Range:. 264 gpm Tube Material: PA, PSU, PVC transparent Seal: EPDM, FPM Float: PVDF, PVDF-HP transparent En Connection: Solvent cement
More informationSIGNET 3719 ph/orp Wet-Tap
ENGLISH 3-3719.090 B-6/02 English Do not exceed maximum temperature/pressure specifications. Wear safety goggles or face shield during installation/service. Do not attempt to disassemble the retraction
More informationMARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationType Electrically Actuated Ball Valve
Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement socket, threaded,
More informationCPVC HOT & COLD PLUMBING SYSTEM PRICE LIST
CPVC HOT & COLD PLUMBING SYSTEM PRICE LIST With effect from 1st June, 2015 SDR-11 (3 Mtr. Length) (Rate per mtr.) 15 ½ M011110301 100 75.00 20 ¾ M011110302 50 110.00 25 1 M011110303 30 174.00 32 1¼ M011110304
More informationSignet 3719 ph/orp Wet-Tap Assembly
Signet 3719 ph/p Wet-Tap Assembly Features Electrode removal without process shutdown Space saving 45 mm (1.75 in.) short-stroke design Sealed pneumatic dampening for smooth and safe operation SafeLoc
More informationGEMÜ R680 Motorized diaphragm valve
Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications
More informationDatasheet Pressure Reducing Valves V782/V82/V182
Datasheet Pressure Reducing Valves V78/V8/V8 Advantages - No auxiliary energy is required to operate the valve - Small standard tolerances due to the large control surface and the spiral spring - Can also
More informationUser s Guide FP-319. Flow Wet-Tap Assembly. Shop online at omega.com SM For latest product manuals:
User s Guide Shop online at omega.com SM e-mail: info@omega.com For latest product manuals: www.omegamanual.info FP-319 Flow Wet-Tap Assembly omega.com info@omega.com U.S.A. Headquarters: Servicing North
More informationDIGIFLO ELECTRONIC FLOWMETER
DIGIFLO ELECTRONIC FLOWMETER PIPE FITTING INSTALLATION MANUAL SADDLE MACHINED IN-LINE BODY MOLDED IN-LINE BODY MOLDED TEE Blue-White R Industries, Ltd. F-2000 Page 2 1.0 Temperature vs. Pressure Temperature
More informationFlowmeter DFM
Flowmeter DFM 165 50 Nominal size DN 10-65 Nominal size /8 2 1/2 Nominal pressure PN 10 bar Features Measuring range to 50,000 l/h suitable for a wide range of applications for gaseous medium types, water,
More informationPVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
More informationType 375. True Union Ball Valve
True Union Ball Valve Type 3 General Size: ⅜ 4 Material: PVC, CORZAN CPVC, or PPn Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged, PPro-Seal electrofusion socket
More informationGeorge Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type 025/028
George Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type /8 Diaphragm Valves - Pneumatic º All-plastic actuator made of PP-GF º Compact design º Lightweight º Comprehensive line of accessories
More informationGaskets. Fluid Handling Components. Bee Valve offers a full line of original and replacement gaskets to meet all your needs.
2009 Fluid Handling Components Gaskets Bee Valve offers a full line of original and replacement gaskets to meet all your needs. Bolted Tank Fitting Bulkhead Fitting Manifold System Cam Coupler Tank Lid
More informationFord Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
More informationType 514, 515, 517, 519
Diaphragm Valve Type 514, 5, 517, 519 General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM, NBR, PTFE/EPDM, PTFE/FPM,
More informationTHOMAS. Ultra Saddles & Tees. Tap In Products PIPE PRODUCTS. Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps
THOMAS PIPE PRODUCTS Tap In Products Ultra Saddles & Tees Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps E1 Ultra Saddles & Tees Overview For a Permanent and Simple Tap In Solution for
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationDiaphragm valve T4 [hand operated]
Praher Kunststofftechnik GmbH DB/EV/DEEN/4/0/95A Subject to technical modifications! General: Body material: Seals: Diaphragm: Dimensions: Connections: -U, PP, PVDF EPDM, FPM EPDM, EPDM/PTFE DN5 DN5 d0
More informationAccutubes. Accuracy True double averaging design +1% of rate accuracy +0.1% repeatability Tested and certified by independent flow labs
s Meriam s Flow Sensors are lab-tested and field-proven flow elements perfect for gas, liquid or steam service. With thousands in use worldwide, the continues to be the right choice when ease of installation,
More informationBall & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
More informationPNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
More informationJULY Polyethylene Piping Systems.
JULY 205 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationSection One. Steel Underground. PVC Accessories Bolt-on Dresser Fittings Solvent PVC Pipe Fittings Gasketed PVC Pipe Fittings
Page Steel Underground Section One Powder Coated Steel Fittings Galvanized Steel Fittings PVC Fittings Riser Valves Clampon Saddles, Couplers, Male Ends Repair Couplers PVC Accessories Bolton Dresser Fittings
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationSignet Conductivity/Resistivity Electrodes
Signet 2818-2823 Conductivity/Resistivity Electrodes 2818 2819 2820 2821 2822 2823 Sanitary Features Standard process connections - Polypro - SS on 10 and 20 cell - Tri-clamp 1-1½ in., 2 - Opt. ½ in. NPT
More informationPipe fi ttings MUST be installed by a certifi ed welder only. Signet will not assume liability of any kind for improper fi tting installations.
Signet 50 High Performance Flow Sensor English *3-50.090* 3-50.090 C 05/06 English SAFETY INSTRUCTIONS 1. Do not remove from pressurized lines.. Do not exceed maximum temperature/pressure specifi cations.
More informationGF Piping Systems Datasheet Ball Valves
Type 546 Ball Valve PROGEF Stanar With butt fusion spigots IR-Plus oel: aterial: PP- esigne for easy installation an removal Ball seals PTFE Integrate stainless steel mounting inserts z-imension, valve
More informationSignet ph/orp Electrodes
Signet 2734-2736 ph/orp Electrodes Compatible with Signet 8900/9900 Instruments Features Patented reference design for exceptional performance * Mounts in Signet standard fittings from DN15 to DN100 (½
More informationPRO-II SERIES SAND MEDIA FILTRATION SYSTEMS Kits and Parts Listing
PRO-II SERIES SAND MEDIA FILTRATION SYSTEMS Kits and Parts Listing TABLE OF CONTENTS Assembling Components...page 8" Tanks & Tank Kits... " & " Dia. Tank & Tank Kits... Manifold Kits 6", 8" & 0"... 5-5
More informationPage ATALOGUE. Web: Tel: Fax:
Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More information+GF+ SIGNET Conductivity Transmitter. Instruction Manual GEORGE FISCHER +GF+
+GF+ SIGNET 3-8800 Conductivity Transmitter Instruction Manual GEORGE FISCHER +GF+ SAFETY INSTRUCTIONS 1. Do not remove from pressurized lines. 2. Do not exceed maximum temperature/pressure specifications.
More informationAir Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
More informationPressure Reducing Valve V782
Pressure Reducing Valve V General Function The V Pressure Reducing Valve reduces the pressure within the system to a pre-set value. By using the differential pressure, the pressure reducing valve adjusts
More information485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
More informationSection 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock
Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More informationRisers/Saddles. NEW - 2 Poly Risers. All handline risers built at B. A. Fischer in Boise, ID. Black Poly Coated Orange.
Risers/Saddles NEW - 2 Poly Risers 2 3 4 All handline risers built at B. A. Fischer in Boise, ID Black Poly Coated Orange BAFSCO Auto Valve Openers Saddles and Tees 2178 Centurion Place Boise, ID 83709
More informationEZ-View Flow Meters. With Flow-Alert TM Flow Switch REDUCE MAINTENANCE COSTS TEL
With Flow-Alert TM Flow Switch Reed switch and latching models Automatically signals alarm if flow is too high or too low Models available for AC or DC power supply Latching models include Hirschmann type
More informationBall Valves George Fischer Type 353, 354, 355 COLORO Ball Valves. Technical Features
Ball Valves George Fischer Type 5, 54, 55 COLORO Ball Valves The George Fischer Type 5, 54, and 55 plastic ball valves feature: monobloc structure provides high safety level: user cannot dissassemble or
More informationFord Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
More informationSignet 2551 Magmeter Flow Sensor
Signet 2551 Magmeter Flow Sensor Available in a variety of wetted materials and ideal for pipe sizes up to DN900 (36 in.) Features Test certificate included for -X0, -X1 Patented Magmeter technology No
More informationPrecision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
More informationVR DN PVC-U. Check valve
VR DN 10 100 PVC-U Check valve VR DN 10 100 The VR is an angle seat check valve with weighted PVC piston that allows the passage of fluid in one direction only CHECK VALVE Connection system for solvent
More informationB U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
More informationSignet Conductivity/Resistivity Electrodes
Signet 2818-2823 Conductivity/Resistivity Electrodes 2818 2819 2820 2821 2822 2823 Sanitary Features Standard process connections - Polypro - SS on 10 and 20 cell - Tri-clamp 1-1½ in., 2 in. - Opt. ½ in.
More informationAdvanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More information+GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE 3-16
+GF+ PNEUMATIC ACTUATED BALL VALVE Type 21/2 2-way True Union Pneumatically actuated ball valve for aggressive fluids and industrial applications. Based on the new Type 546 ball valve, the Type 21-2 uses
More informationSPECIFICATIONS SEWAGE/SUMP DUPLEX SYSTEM ZOELLER COMPANY SUBMERSIBLE SEWAGE OR DEWATERING PUMPS
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 40256-0347 SHIP TO: 3649
More informationDIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
More informationType 147. Electrically Actuated Lug Butterfly Valve
GF Piping Systems Electrically Actuated Lug Butterfly Valve Type 147 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM
More informationThe Number One Choice of Line Stopping Contractors
JCM 0 Line Stop Fittings Take a Look!!! JCM 0 FAMILY OF LINE STOP FITTINGS HAS EPANDED New Plug Option - New Numbering System Whatever your application needs, JCM has it! JCM Industries offers the largest
More informationHAWLE - ZAK System. the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS.
HAWLE - System the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS. HAWLE - System the threadless, restraint jointing system for service connections integrated in Pipe Saddles, Service
More informationDiaphragm Valve MV 310
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation
More informationSection 14. Gate Valves
Section 14 Gate Valves 221 A-Gate Brass Gate Valve S Brass Brass Brass Brass and Wheel Ductile Iron Threading ISO 228 Thread BSP 180 C 16 bar General Purpose Brass Gate Valve AGVFF/015 15 43 85 50 0.24
More informationSANITIZER PARTS SANITIZER PARTS
SANITIZER PARTS 579 AUTOMATIC FEEDER - MODEL 300, 302, 300-19, 300-29 R171026 R171016 Model No.: 300 302 Description: AUTOMATIC FEEDER SPA HOT TUB FEEDER 1 1 R172008W 3 in. threaded cap, white 2 1 R172009
More information* * Rev. 9 01/18 Product Manual
English Signet 2760 DryLoc ph/orp Preamplifier *3-2760.090* 3-2760.090 Rev. 9 01/18 Product Manual Description The Signet 2760 ph/orp Preamplifiers with DryLoc connectors are part of Signet's growing line
More informationType 21 True Union Ball Valves
PDF Published June 27, 218 Type 21 True Union Ball Valves The Chemline Type 21 True Union Ball valve incorporates state of the art features for long term performance. This is a full port, full blocking
More informationPipe fi ttings MUST be installed by a certifi ed welder only. Signet will not assume liability of any kind for improper fi tting installations.
Signet 50 High Performance Flow Sensor English *3-50.090* 3-50.090 Rev. F 11/1 English For the most up-to-date information, please refer to our website at www.gfsignet.com SAFETY INSTRUCTIONS 1. Do not
More informationBid # Plumbing Supplies RESULTS
BOARD APPROVED Bid # 15-4 - Plumbing Supplies Page 1 of 16 Grant Plumbing North Brunswick NJ PVC PIPE, SCHEDULE 40 1 1-1/4" PVC Pipe, SCH 40, 20' feet 60 $0.598 $35.88 2 1-1/2" PVC Pipe, SCH 40, 20' feet
More informationMagnetic Paddle Flow Sensor/Switch for Easy On/Off Control
Magnetic Paddle Flow Sensor/Switch for Easy On/Off Control INLINE Quarter-Turn ON/OFF Control System for Monitoring and Switching Mechanical adjustment of set point No contact to Fluid thanks to INLINE
More informationSignet ph/orp Electrodes
Signet 2724-2726 ph/orp Electrodes Compatible with ALL Signet ph/orp Instruments Features Flat Glass Protected Bulb Patented reference design for exceptional performance * Mounts in Signet standard fittings
More information