0513 Sinus rules V-blocks (pair) DIN. Specification. Special steel, hardened DIN 2273
|
|
- Cordelia Henderson
- 5 years ago
- Views:
Transcription
1 0513 Sinus rules With sinus table Without stop type B With stop type A Roller spacing Length tolerance Ref. No. List price mm µm Euro V-blocks (pair) Special cast iron, hardened 90 grooves Grade 0, parallelism tolerance < mm, V-grooves and base finely grinded 100 x 40 x x 50 x x 70 x Grade 1, parallelism tolerance < 0.01 mm, V-grooves and base grinded 100 x 40 x x 50 x x 70 x Grade 3, parallelism tolerance < 0.04 mm, V-grooves and base milled 100 x 40 x x 50 x x 70 x = Waterproof acc. = Data output = 227
2 0520 V-blocks (pair) 90 grooves, machined in pairs End face and base are angular 75 x 35 x x 47 x x 55 x x 5 x x 85 x Pair of X type V-blocks (parallel) Factory standard Special cast iron 4 x 90 grooves, different sizes Grade 0, parallelism tolerance < mm, V-grooves and base finely grinded 0 x 120 x x 150 x x 200 x Grade 1, parallelism tolerance < 0.01 mm, V-grooves and base grinded 0 x 120 x x 150 x x 200 x Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
3 0522 Double V-blocks (pairs) with clamp 2 x 90 grooves End face and base are angular 50 x 40 x x 55 x x 75 x Clamp for double V-blocks (pairs) Length Ref. No. List price mm Euro Double V-blocks (pairs) with clamp lateral tilting 2 x 90 grooves End face and base are angular 0 x 58 x x 70 x x 9 x = Waterproof acc. = Data output = 229
4 0525 Adjustable V-blocks 0-0 Locking device Nonius reading 75 x 25 x x 30 x x 4 x Magnetic measuring and clamping prism Flatness and parallelism is ; right-angled tolerance is 0.01 mm Magnet can be switched ON/OFF Magnetic force 00 N Special steel 80 x 7 x x 70 x Special steel, hardened 80 x 7 x x 70 x Magnetic measuring and clamping prism (pairs) Grinded in pairs Special steel 80 x 7 x x 70 x Special steel, hardened 80 x 7 x x 70 x , Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
5 053 Set of parallel blocks Wooden case Measuring range Height and Height Width Ref. No List price parallelism tolerance mm mm mm mm Euro Set consists of 9 pairs, length 100 mm Set consists of 9 pairs, length 150 mm Set consists of 12 pairs, length 120 mm Set consists of 14 pairs, length 150 mm Set consists of 20 pairs, length 100 mm Set consists of 24 pairs, length 125 mm / ± / ± / ± / ± / ± / 14 / 18 / 22 / 2 / 30 / 34 / 38 / / 14 / 18 / 22 / 2 30 / 34 / 38 / / 1 / 18 / / 24 / 2 / / 32 / 35 / / 1 / 18 / / 24 / 2 / / 32 / 35 / / 50 5 / 10 / 15 / 20 / 11 / 1 / 21 7 / 12 / 17 / 22 8 / 13 / 18 / 23 9 / 14 / 19 / / ± / 1 / 21 / 2 / 31 / 3 13 / 18 / 23 / 28 / 33 / / 20 / 25 / 30 / 35 / / 22 / 27 / 32 / 37 / Set consists of 24 pairs, length 150 mm / ± / 1 / 21 / 2 / 31 / 3 13 / 18 / 23 / 28 / 33 / / 20 / 25 / 30 / 35 / / 22 / 27 / 32 / 37 / = Waterproof acc. = Data output = 231
0230 / 0231 Workshop calipers with parallax-free reading
0230 / 0231 Workshop calipers with parallax-free reading Parallax-free reading Reading parts have a satin chrome finish Knife points for measuring range 500 mm: 20 mm Direct reading of internal and external
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationMARKALAMA CİHAZLARI. Çiziciler. Pergeller. Markalama Kumpasları. Markalama Kumpasları. Özel Markalama Kumpasları. Yükseklik ve Markalama Mihengirleri
MARKALAMA CİHAZLARI 2 3 5 7 10 14 Çiziciler Pergeller Markalama Kumpasları Markalama Kumpasları Özel Markalama Kumpasları Yükseklik ve Markalama Mihengirleri 0301 Precision dividers With a rivetted hinge
More information0268 Gear tooth calipers
0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26
More informationMarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments
+ MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments Indicator Stands MarStand 815 GN With Cast Iron Base MarStand 815 MA / 815 MB / 815MG / 815 P With Magnetic Base 8-2 8-3 Post
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More information0280 / 0281 Vernier depth gauges
0280 / 0281 Vernier depth gauges Reading parts have a satin chrome finish 862 Low-set master scale Measuring rod with interchangeable pin High-precision laser graduation on the vernier and scale Cardboard
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More information最終校 NEW! STANDARD TOOL RUN-OUT GAUGE SYSTEM. Made in Japan. Concentricity measurement by mounting your current indicator to this system.
236p 236p 236p 238p 238p 239p 239p 239p 240p 240p 240p 241p 241p 241p 242p 242p 243p 243p 244p 244p 245p 245p 246p 246p 246p 246p 247p 247p 248p 248p 248p 248p 249p 249p 250p 251p 252p 252p 253p V S 253p
More informationMETROLOGY In Germany at home in demand worldwide.
METROLOGY 2015 In Germany at home in demand worldwide www.helios-preisser.de METROLOGY 2015 In Germany at home in demand worldwide Dear HELIOS-PREISSER Customer, One company, one team, many new aspects,
More informationCHAIN ENDS acc. DIN 764 / 766 Dimensions
CHAIN ENDS acc. DIN 764 / 766 Dimensions DIN 764 ESD64250 ESD64300 Nominal Outside Weight per Breaking Pitch N of links Proof load diameter width chain end load Proof load Breaking load d [mm] t [mm] b
More information200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until
3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier
More informationStandard Scales SERIES 182 Made of Low-Expansion Glass. Working Standard Scales SERIES 182 E-32
Standard Scales SERIES 182 Made of Low-Expansion Glass High-precision glass scales manufactured under Mitutoyo s leading-edge Linear Scale production technology. High accuracy is guaranteed to be used
More informationGauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
More informationПОСТАВЩИК: Компания ООО"ИНТЕХСЕРВИС" ,г.Москва,ул.Гурьянова,д.2,корп.2 тел./факс: 8(499) E mail:
Calipers B-1 E LECTRONIC C ALIPERS DIN 862 (Style 1A-ZS) 0,01 0.0005 in LCD, 7 Floating zero TESA CAL IP67 magna µ system Patented measuring system TESA magna µ system New electronic caliper The highest
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationE905-WFMW + RP991BLMW E901-WFMW + RP995BLMW E905-WFMW + RP999MW
Magnetic Bases and Fitments Magnetic Bases All units are suitable for use with dial indicators and test dial indicators 900 and 901 versions both have push button ON/OFF control 905 model has a toggle
More informationSP - SURFACE GRINDING AND MILLING MACHINES. AZ spa MACHINE TOOLS. SP1300 SP1600 SP2000 version M-Y-PLC
SP - AZ spa MACHINE TOOLS SP1300 version M-Y-PLC 0.2 Variable speed - on the table movement - on the head movement - on the grinding wheel rotation Automatic and programmable working cycle SP1300 PLC PLC
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More informationMODEL A-I-SPECIFICATIONS
ARTER Model A Rotary Surface Grinders are built in a light and heavy series. General Construction- The general design of both models is the same but the major units of the A-3 machines are of greater proportions.
More informationCylindrical roller bearings
Cylindrical roller bearings Cylindrical roller bearings are manufactured in a various range of constructive types and sizes, particularly single row cylindrical roller bearings but also two or more row
More informationAPPLICATION NOTE. Mounting instructions for EasyPIM 750 and EasyPACK750 Modules with screw clamps
Date: 2003-08-12 APPLICATION NOTE Page 1 of 9 Mounting instructions for EasyPIM 750 and EasyPACK750 Modules with screw clamps 1. General information The mounting instructions outlined below are recommended
More informationTechnical Data, Dimensioning, Mounting
6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load
More informationPrecision Surface Grinder
Precision Surface Grinder SGS-2040 AHD/SD SGS-2060 AHD/SD SGS-S2460 AHD/SD A 70.9" (1800) 107.3" (2725) 110.2" (2800) B 118.1" (3000) 171.3" (4350) 171.3" (4350) C 163.8" (4160) 236.2" (6000) 244.1" (6200)
More informationChain Drives. Sprockets. Belts. Pulleys
Chapter 10 119 Roller Chains Roller Chain Attachments Double Pitch Chains Leaf Chains Timber Chains Agricultural Chain Attachments Conveyor Chains Conveyor Chain Attachments Chain Drives Taper Bore Sprockets
More informationWILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32
Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31
More informationStraightness, Angle and Inclination Measurement
Straightness, Angle and Inclination Measurement Straightness, Angle and Inclination Measurement H-1 Straightness, Angle and Inclination Measurement Levels with Natural Measuring Base Mechanical instruments
More informationFUNCTION OF A BEARING
Bearing FUNCTION OF A BEARING The main function of a rotating shaft is to transmit power from one end of the line to the other. It needs a good support to ensure stability and frictionless rotation. The
More informationt in Promotion Brochure Spring 2017 Partner for specialist retailers In Germany at home in demand worldwide valid until
ts n e l i-ta t l u M ion t c A in + al rigin Swiss tknif e o c ke artner for specialist retailers romotion Brochure Spring 17 In Germany at home in demand worldwide valid until 30.0.17 1 MUL T I -TA L
More informationCoated. Carbide APMX LF. Dimensions (mm) Stock Cutting diameter
AURORA ASM 000DL Type ing Corner Groove Milling Groove Finishing Face Milling Spot Facing Helical Milling Ramping Tempered Die Hardened Ti Heat Resistant Cast ron Grhite 30 0.040 0.060 Groove Milling (
More informationNCN 9.2. Clamping vise with mechanical/mechanical clamping force multiplier NCN MVS-NCN CLAK NCN. Accessories NCN. Spare parts NCN.
lamping vise with mechanical/mechanical clamping force multiplier pag. 9.2. 2 lamping vise V- pag. 9.2. 8 odular vertical system K pag. 9.2. 14 odular parallels/quick change ccessories pag. 9.2. 15 pare
More informationMulti-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
More informationTIME Testing Instrument Solutions (For Automotive Industry)
TIME Testing Instrument Solutions (For Automotive Industry) 1. Applications in Automotive Industry Engine: Leeb Hardness Tester (cylinder, crankshaft) Ultrasonic Hardness Tester (valve, gear) Roughness
More informationstructure and components
HSP 643 WAVE structure and components Vertical motion double drive system, two linear rollers high preloaded guideways, two guideways in a composite material. Vertical Z motion supported by two pneumatic
More informationIndividual Industry Solutions
Individual Industry Solutions 2 FLSmidth MAAG Gear s sector solutions The know-how we have gathered over the course of decades allows us to meet all our customers special requirements in many different
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationTHE PRODUCTION COMPARATOR STAND
845-454-3111 800-549-4243 THE PRODUCTION COMPARATOR STAND The Dorsey E1 comparator stand is specially designed for use in production and shop areas. The comparator stand has a large base and 3" throat
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Laboratory locations: Unit 9 G B Quality ssurance (Consultants)
More informationPortable Hardness Tester TIME Ultrasonic Contact Impedance (UCI) Method
Portable Hardness Tester TIME5620 -Ultrasonic Contact Impedance (UCI) Method Larger, clear screen displays probe information, battery information, the average, maximum, minimum readings of select hardness
More informationGENERAL SPECIFICATION
GENERAL SPECIFICATION Description FSG-2040ADII FSG-2060ADII FSG-2440ADII FSG-2460ADII FSG-2480DII Table Size 19 5/8 x393/8 (500x1000mm) 19 5/8 x59 (500x1500mm) 24 x39 3/8 (610x1000mm) 24 x59" (610x1500mm)
More informationFSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER
FSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER 1 CONTROL PANEL F S G - 2 0 / 2 4 COLUMN TYPE HIGH PRECISION 3-AX 1. Control power supply switches
More informationFSG-2A818/3A818 HIGH PRECISION SURFACE GRINDER
FSG-2A818/3A818 HIGH PRECISION SURFACE GRINDER FSG-2A8 1 FEATURES HIGH PRECISION SU FSG-2A818.3A818 These grinders have been specially developed and improved in recent years by us to continuously offer
More informationPROFIMAT MT. Profile grinding with increased profitability. More than Precision
PROFIMAT MT Profile grinding with increased profitability More than Precision PROFIMAT MT Universal state of the art grinding technology for profile grinding applications The multi-talent in profile grinding
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationU < 1000 V I 0 A I > 0 A. Current-insulating SLF rolling bearings. Electrical insulation between housing and shaft prevents this damage.
prevent damage by current passage Electrical insulation between housing and shaft prevents this damage. Electric voltage which is internally generated between the motor and the stator, especially in electric
More informationOutstanding features. 62 Bosch Rexroth Corporation Roller Rail Systems R310A 2302 ( ) Standard Guide Rails, Steel version
62 Bosch Rexroth Corporation Roller Rail Systems R310302 (2007.06) Outstanding features Guide rails with hardened raceways and ground on all sides Corrosion-resistant guide rails in Resist CR, matte silver
More informationUNISON CORPORATION. DedTru Centerless Grinding Product Line
Price List PL UNISON CORPORATION DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model C6 DedTru Grinding Fixture Model IGF Internal Grind Fixture
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
More informationFSG-1224ADII/1632ADII /1640ADII AUTOMATIC PRECISION SURFACE GRINDING MACHINE
FSG-1224ADII/1632ADII /1640ADII AUTOMATIC PRECISION SURFACE GRINDING MACHINE F S G - 1 2 / 1 6 A D 1 FEATURES AUTOMATIC PRECISION SURFAC FSG-1224ADII 1632ADII 1640ADII AUTOMATIC PRECISION SURFACE GRINDING
More informationTHE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE
THE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE SAWING NEW 14" x 60" ELECTRIC PLATE ROLLER Three-roll design
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
More informationJansen Pompentechniek T: +31(0) E:
1 1 VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet) Speed up to 1450 min -1 (1450 r.p.m.) Sizes: DN 65 up to DN 150 (21/2 up to 6 )
More informationhttps://www.indiamart.com/hvddistributors/
+91-8048078476 Hvd Distributors Pvt. Ltd. https://www.indiamart.com/hvddistributors/ We are the leading Manufacturers, Importers, Distributors, Exporters and Suppliers of all types of Bearings, Ball Transfer
More informationOver 2 mm and. less than 10mm. 1/10 revolution /2 revolution ±9 ±5 ±6 ±3 ±5 ±6. One revolutions ±10 ±6 ±7 ±4 ±6 ±7
G1 Scale interval 0.01mm 0.002mm 0.001mm Measuring range 10mm max. 2mm max. Over 2 mm and less than 10mm 1mm max Over 1 mm and less than 2mm Over 2 mm and less than 5mm Retrace error 5 3 4 3 3 4 Repeatability
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationSecured Door w/ Electric Lock - Solenoid
Secured Door w/ Electric Lock - Solenoid Solution family: Interior Door solution Solution group: Single-Wood-Self Closing- Access Control Description The ASSA ABLOY Belgium solution for secured interior
More informationAdvantages and Disadvantages of Rolling Contact Bearings Over Sliding Contact Bearings
Advantages and Disadvantages of Rolling Contact Bearings Over Sliding Contact Bearings Advantages 1. Low starting and running friction except at very high speeds. 2. Ability to withstand momentary shock
More informationK Used overhauled. FEATURES: Grinding wheel motor 7.5 kw; Grinding segments holder Ø200mm; Magnetic chuck thin polarity 2100x150mm;
grinding technologies SPECIAL OFFERS June 2018 K250 2100 FEATURES: Grinding wheel motor 7.5 kw; Grinding segments holder Ø200mm; Magnetic chuck thin polarity 2100x150mm; PLC; Angular divisor +/-90 : Inversion
More informationSeamless hot rolled tubes and seamless hollow bars
Seamless hot rolled tubes and seamless hollow bars Benteler Distribution Customised steel tube solutions An internationally operating stockholding company of carbon alloy and stainless steel tubes With
More informationAAR Manual of Standards and Recommended Practices Specification for Quality Assurance APPENDIX A REFERENCE GUIDE
M-1003 REFERENCE GUIDE Shown below is a listing of products and/or services that require M-1003 certification, the Field rule and/or circular letter that added the product or service to the M-1003 program,
More informationCompacting with Rolling the high Production Way
Compacting with Rolling the high Production Way GRANLUND Reducing Rolling Mills, Type KOR No pounding or vibration causing off-centre coils. Silent operation. High production. Auxilary equipment. Automation
More informationHealthweigh. Rice Lake Weighing Systems
Available October 2007 , an ISO 9001-registered company, and a leader in delivering high quality weighing and process-control solutions to industry for 60 years. We design, manufacture, and distribute
More informationCOMAX REINFORCEMENT CONTINUITY STRIP
EURO ACCESSORIES COMAX REINFORCEMENT CONTINUITY STRIP www.euroacc.co.uk Introduction: Euro Accessories are distributors in the UK and Ireland for the Comax Continuity System. Comax is one of Europe s premier
More informationCOOLING, LUBRICATING, RINSING, MAINTAINING TEMPERATURES.
5 Screw Spindle Pumps COOLING, LUBRICATING, RINSING, MAINTAINING TEMPERATURES www.brinkmannpumps.de GB Story Engineering Each Brinkmann Pump is embedded with often many years of research, including internal
More information1360 DIGI-MET Depth gauges
360 DIGI-MET Depth gauges 862 Protection class IP67 862 Straight measuring rod RS 232 + Digimatic + USB mm inch mm inch mm inch 50 6 00 4 0.0.005 360 76 304.00 200 8 00 4 0.0.0005 360 78 345.00 300 2 50
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
HOLE LOCATION PLUG GAGES SERIES 200: THREAD PLUG GAGES SERIES 635: All diameters concentric within.0001 T.I.R. Shaft dia. (C).2500 +.0002, -.0000 on all gages to simplify calculation of hole spread. Shaft
More informationK Used FEATURES:
grinding technologies SPECIAL OFFERS November 2017 K250 3100 Used FEATURES: Rotating magnetic chuck width 150mm from 0 to 90 ; Angular divisor for magnetic chuck; Grinding motor 7,5 kw (10 HP); Segment
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationJT-SERIES TRAPEZOIDAL SCREW JACKS
J A C TO N I N D U S T RY C O., LT D L I F T I N G S Y S T E M S S O L U T I O N S TEL: 86-769-81585810, 81585852 SKYPE: jacjack EMAIL: sales@screwactuator.com WEB: www.screwactuator.com JT-SERIES TRAPEZOIDAL
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationLow profile slides type RTS
Low profile slides type RTS TECHNISCHE DATEN ASSEMBLY The mounting holes of each type are drilled to a standard configuration in slide-top and -base and permit the user a quick attachment into the application.
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationCarbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
More informationPRODUCTS AND SERVICES 2017
PRODUCTS AND SERVICES 2017 www.wagears.com.au INTRODUCTION WA Gears Pty Ltd is a precision gear manufacturing company based in Henderson, Western Australia. We specialise in manufacturing gears and precision
More informationContent. Page 4 7. Technical Information Electrical. Models and Applications Technical Information Potentials for energy savings
Content Technical Information Electrical Page 4 7 Models and pplications Technical Information Potentials for energy savings 8 0 High Pressure Pumps BFS, FFS / 50 Hz BFS2, FFS2 / 50 Hz High Pressure Pumps
More informationConstruction Enclosure coupling and elbow coupling fittings are die-cast from G AL SI 12 aluminum. Suspension tubing is steel.
Tara Plus Measurement Conversions 1 kg = 9.81 N 1 lb = 4.44 N e.g. 500 Newtons = 51 kg = 112.4 lbs 300 Newtons = 30.6 kg = 67.4 lbs 100 Newtons = 10.2 kg = 22.5 lbs 1 foot = 0.305 m Application Taraplus
More informationThe Precision Alliance (TPA) Office: Frictionless slides type RT
USA Contact: The Precision Alliance (TPA) Office: 800-284-9784 Frictionless slides type RT TECHNISCHE DATEN ASSEMBLY The mounting holes of each type are drilled to a standard configuration in slide-top
More informationPRODUCT INFORMATION FENNER V-BELTS AND WEDGE BELTS
PRODUCT INFORMATION FENNER V-BELTS AND WEDGE BELTS Not all belts are the same. Fenner belts are made to exacting specifications and have set the standard in technical development in the toughest applications
More informationSCREW SPINDLE PUMPS COOLING, LUBRICATING, CHIP HANDLING, PRESSURE BOOSTING, FLUSHING, MAINTAINING TEMPERATURES...
2018 SCREW SPINDLE PUMPS COOLING, LUBRICATING, CHIP HANDLING, PRERE BOOSTING, FLUSHING, MAINTAINING TEMPERATURES... www.brinkmannpumps.com Content Technical Information Electrical Features 4 8 Control
More informationUNIVERSAL PRODUCTION EDGE BELT SANDERS
UNIVERSAL PRODUCTION EDGE BELT SANDERS Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More informationSERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.
1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,
More informationWire ball bearing. Type Series KVE Type Series MVE Type Series ZVE Type Series KER Type Series KED Type Series KEDD Type Series DFX Type Series DSE
Wire ball bearing Type Series KVE Type Series MVE Type Series ZVE Type Series KER Type Series KED Type Series KEDD Type Series DFX Type Series DSE Publication DKL 100 E 04/2005 Index Page 2 Wire ball bearing
More informationBrake caliper machining: improve process control and reduce inspection costs
Case brief Brake caliper machining: improve process control and reduce inspection costs Reduce part costs Full traceability High accuracy automated shop floor gauging Overview Manufacturers of brake calipers
More informationSCREW SPINDLE PUMPS COOLING, LUBRICATING, RINSING, MAINTAINING TEMPERATURES.
SCREW SPINDLE PUMPS COOLING, LUBRICATING, RINSING, MAINTAINING TEMPERATURES www.brinkmannpumps.de GB Story Engineering Each BRINKMANN Pump is embedded with often many years of research, including internal
More informationCOUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
More information10.3 Flanged Connections acc. to EN 1092
10.3 Flanged Connections acc. to EN 1092 EN 1092 is split into two sections: - EN 1092-1 edition 09-2008 for steel flanges - EN 1092-2 edition 06-1997 for cast iron flanges EN 1092 contains dimensions
More informationWELD PLATE GAUGE TOOL INSTRUCTIONS
WELD PLATE GAUGE TOOL INSTRUCTIONS Introduction The weld plate gauge tool has been developed in order to verify that upon reception and installation of the weld plate they are within acceptable tolerance.
More informationDrawn cup needle roller bearings
Drawn cup needle roller bearings Sealed drawn cup needle roller bearings... 78 Full complement drawn cup needle roller bearings... 79 3 Dimensions... 79 Tolerances... 79 Misalignment... 80 Cages... 80
More informationMTK+ Suffix and prefix overview. Deep groove ball bearings. Self-aligning ball bearings
TK+ Suffix and prefix overview uthor Kevin Drake Released by Koen Geeraerts Release date 26 June 2016 Document Id D-833 Version 1.2 Revision date 14 July 2016 Deep groove ball bearings Z Pressed steel
More informationPRECISION GRANITE USA has been providing precision granite metrology products to companies worldwide including many government facilities since 1984.
PRECISION GRANITE USA has been providing precision granite metrology products to companies worldwide including many government facilities since 1984. PRECISION GRANITE SURFACE PLATES are made of black
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationBerthiez TVU, Berthiez RVU Vertical turning and grinding machines
Engineering precisely what you value Berthiez, Berthiez RVU Vertical turning and grinding machines 02 Turning, boring, milling, grinding The vertical turning lathes serve wide range of machining tasks
More informationKaydon white paper The thin section bearing of today
The thin section bearing of today by Joe Zagar, engineering specialist an SKF Group brand Thin section bearings provide space, save weight The ubiquitous ball bearing was a workhorse of industry throughout
More information2018 Junior Sprint Rules
2018 KidSprint Engine Rules Briggs World Formula 2018B All parts must be Briggs & Stratton factory production parts unless otherwise noted in these rules. No machining, polishing or alteration of any parts
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
More information