ПОСТАВЩИК: Компания ООО"ИНТЕХСЕРВИС" ,г.Москва,ул.Гурьянова,д.2,корп.2 тел./факс: 8(499) E mail:

Transcription

1 Calipers B-1

2 E LECTRONIC C ALIPERS DIN 862 (Style 1A-ZS) 0, in LCD, 7 Floating zero TESA CAL IP67 magna µ system Patented measuring system TESA magna µ system New electronic caliper The highest degree of protection ever achieved with hand-held tools of this type Totally iune to the penetration of liquids and particles of metal. Magnetic measuring system a TESA s technology guaranteeing full reliability and accuracy, even in the thoughest conditions of use SWISS MADE. Conversion / in 100 = 20 µm >100 = 30 µm 10 µm Steel scale with incremental divisions, magnetic > 1,8 m / s RS232 opto-coupled, mono- and bi-directional Hardened stainless steel 3V lithium battery, CR ,5 a ( 2000 h / a) Idle mode after 10 min, automatic switch off after 2 h. 10 C to 40 C ,6 6 ø ,7 150 / 6 in 200 / 8 in 4 6 1,7 15,5 15,5 300 / 12 in -10 C to 60 C 100% IP67 (IEC 60529) EN EN Suited plastic case Inspection report with a declaration of conformity / in RS232 Thumb roller A B C g / , / , / , / , / , / , / ,5 270 Optional Accessories V lithium battery, 190 mah, type CR 2032 Depth foot for calipers having a 150 measuring span (also see on page B-24) For connecting cables, see section A B-3

3 E LECTRONIC C ALIPERS TESA SHOP-CAL Patented measuring system TESA magna µ system ABSOLUTE or DIFFERENCE measurements High quality precision mechanics Large LC display Easy-to-use Best Price/Performance relationship DIN 862 (Style 1AZ) 0, in LCD, 7 Floating zero «ABS» and «DIFF» Conversion / in 100 = 20 µm >100 = 30 µm 10 µm Capacitive glass scale with incremental divisions ø > 2 m / s Hardened stainless steel 3V lithium battery, CR a ( 2000 h / a) Idle mode after 10 min, automatic switch off after 2 h. 10 C to 40 C -10 C to 60 C 80% / in Thumb roller A B C g / ,5 140 Optional Accessories V lithium battery, 190 mah, type CR 2032 Depth foot for calipers having a 150 measuring span (also see on page B-24) IP40 (IEC 60529) EN EN Suited plastic case Inspection report with a declaration of conformity B-4

4 D IAL C ALIPERS DIN 862 (Style 1AR) 100 = 20 µm >100 = 30 µm Hardened stainless steel 32 diameter rotating dial with lock Dial Calipers Rugged construction High accuracy Patented shockproof design Ideal for use in the workshop. Models TESA CCMA-M Easy-to-read dial calipers Slider with metal dial housing Models with a 200 or 300 measuring span fitted with a thumb roller. Slider with locking screw Steel gear mechanism, hardened and ground Patented shockproof design Suited plastic case A B x1.9 C / 6 in x / 8 in x / 12 in Thumb roller A B C , in in 0.1 in , ,6 89, , ,6 105,5 Optional Accessory Depth foot for models 150 /6 in (also see page B-24) B-5

5 D IAL C ALIPERS Model ETALON 125 Slider with metal dial housing 1 per pointer revolution. DIN 862 (Style 1AR) 100 = 20 µm >100 = 30 µm Hardened stainless steel 32 diameter rotating dial with lock C A B x Slider with locking screw Steel gear mechanism, hardened and ground Patented shockproof design Suited plastic case ,02 1 Optional Accessory Depth foot (also see page B-24) without thumb roller Model TESA CCMA-M, 0,01 Slider with metal dial housing 1 per pointer revolution. DIN 862 (Style 1AR) 100 = 20 µm > 100 = 30 µm Hardened stainless steel 32 dia. rotating dial with lock x Slider with locking screw Steel gear, hardened and ground Patented shockproof design Suited plastic case ,01 1 Optional Accessory Depth foot (also see page B-24) B-6

6 D IAL C ALIPERS Model TESA CCMA-P Quick and easy reading Slider with plastic dial housing. DIN 862 (Style 1AR) 100 = 20 µm >100 = 30 µm Hardened stainless steel 32 dia. rotating dial with lock Slider with plastic dial housing plus locking screw Steel gear, hardened and ground Patented shockproof design x Suited plastic case , in in 0.1 in Optional Accessory Depth foot (also see page B-24) B-7

7 V ERNIER C ALIPERS TESA Calipers with Vernier Reading The calipers that offer good value for money. Fitted with a locking screw. DIN 862 (Style 1AN-2) NF E Satin-chrome scale background; main scale slightly set back for wear protection B See page B-2 A C A B C Hardened stainless steel Suited plastic case 2 2 C in in A B C SWISSCAL , ,5 Ø 1, Standard model , ,5 Ø 1, Standard model , / ,5 Ø 1, Standard model , / ,5 x Standard model , / Standard model , ,5 Ø 1, Standard model , ,5 x Standard model , Self-locking model , / ,5 1,5 x Self-locking model , ,5 1,5 x Self-locking model , / ,5 1,5 x 2 with parallax-free readout Self-locking model , ,5 1,5 x 2 with parallax-free readout Optional Accessories Depth measuring foot (also see page B-24) Magnetic magnifying glass, 3x magnification Magnetic Magnifying Glass Can be mounted on calipers and the like for easier vernier reading. Plastic pocket bag B x magnification 2 permanent magnets

8 E LECTRONIC C ALIPERS DIN 862 and factory standard See table 0, in LCD, 8,5 INTERAPID Light Measuring functions Zero setting Metric/Inch conversion Hold function for displayed value OPTO-RS data transfer, mono- and bi-directional Two adjustable points of origin (Ref I / Ref II) PRESET function MIN/MAX mode Two limit values for the classification Floating zero Display lock / in conversion Scale with incremental divisions, magnetic > 1,5 m / s RS232 opto-coupled, mono- and bi-directional Hardened steel jaws for external dimensions. Also with TiN coating, thickness to 7. Tungsten carbide inserts for internal dimensions, 5 dia. Beam with light alloy hollow section, supported by hardened stainless steel rods. 3V lithium battery, CR ,5 a ( 3300 h / a) µm µm A B fixed C movable kg INTERAPID Light , INTERAPID Light , INTERAPID Light , INTERAPID Light INTERAPID Light , INTERAPID Light , INTERAPID Light Models 300 and 600 with a fixed jaw (left), any other model with a movable one. 5 C to 40 C 10 C to 60 C 20,6 10 IP40 (IEC 60529) EN EN Shipping packaging SWISS MADE for models up to Declaration of conformity A B C B-9

9 E LECTRONIC C ALIPERS Standard Accessories A B C D Insert-holder with a M2,5 thread 60 conical steel pin, hardened steel for measuring centre distances >10 Holder for dial gauge inserts used for groove measurement, L = 28 Holder for dial gauge inserts used for groove measurement, L = 58 Wooden case for INTERAPID Light 300 Wooden case for INTERAPID Light 600 Wooden case for INTERAPID Light 1000 Wooden case for INTERAPID Light V lithium battery, 190 mah, type CR 2032 For connecting cables, see section A B C D SWISS MADE 14 A H 2,5 B-10

10 E LECTRONIC C ALIPERS DIN 862 (Style E-ZS/B-ZS) TESA IP67 Models with rounded measuring faces for internal dimensions See table 0, in LCD, 7 Floating zero Display lock / in conversion See page B-2 Steel scale with incremental divisions, magnetic > 1,8 m / s RS232 opto-coupled, mono- and bi-directional A B in A B Optional Accessory V lithium battery, 190 mah, type CR 2032 For connecting cables, see section A Hardened stainless steel 3V lithium battery, CR ,5 a ( 2000 h / a) Idle mode after 10 min., automatic switch off after 2 h. Models with rounded measuring faces and knife-edge jaws for both internal and external dimensions 10 C to 40 C -10 C to 60 C C 100% IP67 (IEC 60529) B EN EN Wooden or plastic case depending on the model Inspection report with a declaration of conformity A in A B C Optional Accessory V lithium battery, 190 mah, type CR 2032 For connecting cables, see section A B-11

11 E LECTRONIC C ALIPERS Model with rounded measuring faces and knife-edge jaws for internal dimensions DIN 862 (Style D-ZS) 0, in LCD, 7 Floating zero C Display lock A B in A B C Optional Accessory V lithium battery, 190 mah, type CR 2032 For connecting cables, see section A / in conversion See page B-2 Steel scale with incremental divisions, magnetic > 1,8 m / s RS232 opto-coupled, mono- and bi-directional Hardened stainless steel 3V lithium battery, CR ,5 a ( 2000 h / a) Idle mode after 10 min., automatic switch off after 2 h. 10 C to 40 C -10 C to 60 C 100% IP67 (IEC 60529) EN EN Wooden case or plastic case depending on the model Inspection report with a declaration of conformity B-12

12 V ERNIER C ALIPERS DIN 862 (Style EN-2) NF E Satin-chrome scale background; main scale slightly set back for wear protection See page B-2 Models with rounded measuring faces for internal dimensions Without fine adjust device a Hardened stainless steel Wooden case or plastic case depending on the model A b B in in a b A B * , , , , , , , , , , , ,02 24, , , , , , Optional Accessory Magnetic magnifying glass, 3x magnification * Provided with a stainless steel rule No , 200 long. B-13

13 V ERNIER C ALIPERS Models with rounded measuring faces for internal dimensions With fine adjust device DIN 862 (Style EN-2F) NF E Satin-chrome scale background; main scale slightly set back for wear protection See page B-2 b a Hardened stainless steel Wooden case or plastic case depending on the model B A in in a b A B , , , , , , , , , , Optional Accessory Magnetic magnifying glass, 3x magnification B-14

14 V ERNIER C ALIPERS DIN 862 (Style BN-2) NF E Satin-chrome scale background; main scale slightly set back for wear protection Models with knife-edge jaws and rounded measuring faces for both external and internal dimensions With or without fine adjust device See page B-2 Hardened stainless steel Wooden case or plastic case depending on the model C b a B A in in a b A B C Without fine adjust device , , , , , , , , , , , With fine adjust device , , , , , , , , , Optional Accessory Magnetic magnifying glass, 3x magnification B-15

15 A D EPTH C ALIPERS TESA IP67 Models with short cut measuring faces or fixed jaws DIN 862 (Style C-ZS) See table 0, in LCD, 7 Floating zero 4 8,5 12 A Display lock / in conversion 12 B See page B ,5 10 Glass scale with incremental divisions,magnetic B 24, C > 1,8 m / s RS232 optocoupled, monoand bi-directional Hardened stainless steel 3V lithium battery, CR 2032 in A B Models A with a short cut measuring face Models B with one fixed jaw Models C with two fixed jaws Optional Accessories 200, 300 or 400 removable bridge (see page B-19) V lithium battery, 190 mah, type CR 2032 For connecting cables, see section A 1,5 a ( 2000 h / a) Idle mode after 10 min., automatic switch off after 2 h. 10 C to 40 C -10 C to 60 C 100% IP67 (IEC 60529) EN EN Wooden case or plastic case depending on the model B-16

16 A D EPTH C ALIPERS Models with rotary stop plate DIN 862 (Style C-ZS) See table 0, in LCD, 7 Floating zero 12 Display lock / in conversion See page B-2 2 1, Steel scale with incremental divisions, magnetic 5,4 2 4 B > 1,8 m / s 12,8 RS232 optocoupled, monoand bi-directional Hardened stainless steel 3V lithium battery, CR ,5 a ( 2000 h / a) Idle mode after 10 min, automatic switch off after 2 h. in A B , , ,5 Optional Accessories 200, 300 or 400 removable bridge (also see page B-19) V lithium battery, 190 mah, type CR 2032 For connecting cables, see section A 10 C to 40 C -10 C to 60 C 100% Small-sized caliper with measuring tip IP67 (IEC 60529) EN EN Wooden case or plastic case depending on the model 50 Ø2 Thickness 7,4 Inspection report with a declaration of conformity in Optional Accessory V lithium battery, 190 mah, type CR 2032 For connecting cables, see section A B-17

17 D EPTH C ALIPERS TESA Calipers with Vernier Reading DIN 862 (Style C-2) NF E Satin-chrome scale background; main scale slightly set back for wear protection See page B-2 Hardened stainless steel Plastic case C B A A ø1 C D D 6 B A ø1,5 C E D 6 B A B C A B C D E Models A with a flat measuring face , , , , , , , , , , , , , , Model B with a steel tip * , ,5 3 8 Models C with both a short cut measuring face and steel tip. Convertible models , , , , , , , , , , Optional Accessories Magnetic magnifying glass, 3x magnification 200, 300 or 400 removable bridge (see page B-19) * The removable bridges available as an option is not convenient for this model. B-18

18 D EPTH C ALIPERS DIN 862 (Style C-2) NF E Satin-chrome scale background; main scale slightly set back for wear protection See page B-2 Hardened stainless steel C A D A C Plastic case 15.5 E D B A 10 B B A B C D E Models A with rotary stop plate , , , , , , , , , , Models B with both a fixed stop plate and short cut measuring face. Convertible models , , , , , , , , , Optional Accessories Magnetic magnifying glass, 3x magnification 200, 300 or 400 removable bridge (see the table below) Removable Bridge Factory standard See table Suited carrying case A B C µm Removable bridge ± 0,005 0, Removable bridge ± 0,005 0, Removable bridge ± 0,005 0,03 10 Each bridge comes with suited attachment. B A C ± 0,005 B-19

19 S CALE U NITS Horizontal or Vertical Scale Unit Lets you measure and position any assembly on fixtures, presetting devices for tooling or machines. Flexible mounting for use in any position. Factory standard See table 0, in LCD, 7 Floating zero Display lock B A / in conversion See page B-2 2 x M3 2,5 in depth 68, Steel scale with incremental divisions, magnetic > 1,8 m / s Milling 14 DIN74-Km5 18,1 4,3 6,8 RS232 optocoupled, monoand bi-directional Hardened stainless steel 3V lithium battery, CR 2032 in A B Optional Accessory V lithium battery, 190 mah, type CR 2032 For connecting cables, see section A 1,5 a ( 2000 h / a) Idle mode after 10 min., automatic switch off after 2 h. 10 C to 40 C -10 C to 60 C 100% IP67 (IEC 60529) EN EN Suited carrying case Inspection report with a declaration of conformity B-20

20 C ALIPERS WITH S PECIAL D ESIGN Factory standard Satin-chrome scale background; main scale slightly set back for wear protection. TESA Calipers With extra long jaws and fine adjust device Hardened stainless steel Wooden case b a B C A a b A B C , , , , Optional Accessory Magnetic magnifying glass, 3x magnification With hook jaws for external dimensions NF E Satin-chrome scale background; main scale slightly set back for wear protection. Hardened stainless steel Wooden case Declaration 3 3 R ,02 Optional Accessory Magnetic magnifying glass, 3x magnification 357 B-21

21 C ALIPERS WITH S PECIAL D ESIGN TESA Calipers with Knife-Edge Jaws for Internal Dimensions DIN 862 (Style DN-2) NF E Satin-chrome scale background; main scale slightly set back for wear protection. Hardened stainless steel Wooden case , Optional Accessory Magnetic magnifying glass, 3x magnification TESA Calipers with Vee Bridge Made to measure groove and slot depths on cylindrical shafts. NF E Satin-chrome scale background; main scale slightly set back for wear protection. Hardened stainless steel Wooden case A e x f c x d a x b a b c d e f A , , , , Optional Accessory Magnetic magnifying glass, 3x magnification B-22

22 C ALIPERS WITH S PECIAL D ESIGN Factory standard Satin-chrome scale background; main scale slightly set back for wear protection. TESA Calipers for Turned Grooves Specially designed for measuring groove or slot diameters, e.g. on safety rings. Hardened stainless steel Wooden case C A B a b a b A B C , , , G H F , , , , , Optional Accessory Magnetic magnifying glass, 3x magnification Factory standard Each slider with fine adjust device Hardened stainless steel. Tungsten carbide coated measuring faces Wooden case Declaration TESA Gear Tooth Caliper Measures gear tooth thickness on the primary diameter. Module , Optional Accessory Magnetic magnifying glass, 3x magnification ß B-23

23 A CCESSORIES FOR C ALIPERS Brown & Sharpe Accessory Sets CENTERLINE Each set includes practical accessories for measuring undercuts, grooves, slots, centre distances of bores, etc. Fits all calipers with analogue or digital indication covering the measuring range 0 to 150 or 0 to 6 in. Steel with black oxide plating Inserts with M2,5 threaded coupling. Lowest centre distance of the mounted insert holder: 10. G A B C D E/F H CENTERLINE Accessory Sets Complete Sets Including: A 1 Pair of disc-shaped measuring inserts 6 0,8 B 1 Pair of disc-shaped measuring inserts 10 0,8 C 1 Pair of disc-shaped measuring insert 12,5 0,8 D 1 Pair of cylindrical measuring inserts 1,5 9,5 E 1 Pair of cone-shaped measuring inserts 9 60 F 1 Pair of cone-shaped measuring inserts 12,5 60 G H 1 Insert-holder (left) 1 Insert-holder (right) 1 Socket head key 1,2 Full accessory set provided in a custom wooden case Full accessory set provided in a fitted wooden case including one TESA Shop-Cal mit capa µ system (No ) Full accessory set in a fitted wooden case. Includes a free space arranging for a caliper covering the measuring range 0 to 150 / 0 to 6 in to be stored (must be ordered separately). Depth Measuring Foot For use with TESA or ETALON universal calipers with measuring ranges from 0 to 150 /0 to 6 in as listed on pages B-3 to B-8. Factory standard Hardened stainless steel x 6 Ground measuring face B-24

24 External Measurement C-1

25 E XTERNAL M ICROMETERS DIN 863 T1 0, in Metric/Inch conversion Tungsten carbide tipped 100 : Ø 6,5 > 100 : Ø 8 TESA MICROMASTER Electronic Micrometers with Digital Display With patented TESA capa μ system Measuring span of 30 or 25. Large easy-to-read digital display. Models: EASY with a single function key. IP54 with water spray protection as well as IP54 RS with added RS 232 interface. 0,5 Max. 10 N LCD, digit height: 7 Floating zero Display lock (except for model EASY) RS 232 interface, opto-coupled 3V lithium battery 1 to 2 a ( 2000 h/a) Automatic shut-down after 10 min. Display setting is maintained as long as power supply remains stable. 10 C to 40 C 10 C to 60 C 80%, noncondensing Protection as per IEC 60529): IP40 (also valid with used RS data output) or IP54 Plastic case MICROMASTER EASY in in IP40 MICROMASTER IP IP IP IP IP54 MICROMASTER IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS IP54 RS 232 MICROMASTER Set Micromaster Set IP54 RS 0 75 Consisting of: Measuring range 0 to 100: with SCS calibration certificate Measuring range over 100 : inspection report along of conformity Micromaster IP54, RS 0 30 IP54 RS Micromaster IP54, RS IP54 RS Micromaster IP54, RS IP54 RS Setting standard, 50 Optional Accessory Lithium battery 3 V, 190 mah, type CR 2032 Connecting cables etc., see chapter A. C-3

26 E XTERNAL M ICROMETERS TESAMASTER Precision Micrometers with Digital Counter to 0,1 Analogue indication of the full millimetres, hundredths and fractions of hundredth Accurate, fast reading of the tenths of millimetres Parallax-free reading of the thousandths of millimetres on vernier. DIN 863 T1 NF E Vernier reading to 0,001 or in Scale division: 0,1 or in Tungsten carbide tipped 100 : Ø 6,5 > 100 : Ø 8 0, ,001 0, ,1 µm µm , , , , , ,5 in µm µm Max. 10 N Plastic case Measuring range 0 to 100 with inspection report and declaration Measuring range smaller than 100 with a declaration ETALON MICRORAPID 226 with 1 Revolution High precision micrometers Fast, accurate reading No reading error of the half millimetres Barrel with pitch to 1 Thimble with 100 graduations Vernier reading to 0,001. DIN 863 T1 NF E Parallax-free vernier reading to 0,001 Tungsten carbide tipped Ø 6,5 1 Max. 10 N Plastic case µm µm , , ,5 C-4

27 E XTERNAL M ICROMETERS DIN 863 T1 NF E to 100 resp. 0 to 4 in with vernier ETALON 260 Standard Models with Analogue Indication The knurled sleeve only needs to be reversed to render the friction drive built into the thimble inactive. Tungsten carbide tipped 100 : Ø 6,5, > : Ø 8 0,5 Max. 10 N Plastic case Measuring range 0 to 100 with inspection report and declaration Measuring range smaller than 100 of conformity µm µm , , , , , , , , in in µm µm DIN 863 T1 NF E ETALON Basic to 0,01 0,01 Tungsten carbide tipped Ø 6,5 0,5 Max. 10 N Plastic case Set of 4 ETALON Basic to 0, C-5

28 E XTERNAL M ICROMETERS TESA ISOMASTER Standard Models with Analogue Indication Slanted full millimetres on the barrel are set apart from the straight half millimetres to virtually eliminate reading errors. The knurled sleeve needs only be reversed to render the friction drive built into the thimble inactive. DIN 863 T1 NF E Tungsten carbide tipped 100 : Ø 6,5 > : Ø 8 0,5 Max. 10 N Plastic case , , , , , , , , , , , ,01 in in Measuring range 0 to 100 with inspection report and declaration Measuring range smaller than 100 of conformity Set of 4 TESA ISOMASTER Same execution as above. The models covering the application range 0 to 100 provide the quality that you need at competitive prices. Plastic case C-6

29 E XTERNAL M ICROMETERS DIN 863 T3 (Style D16) 0, in MICROMASTER with interchangeable Anvils All sets include 4 interchangeable anvils with increasing length in steps of 25. Anvils are adjusted (and ed) in sets, thus rendering the correction of the indication unnecessary whenever an anvil is exchanged. Metric/Inch conversion 30 measuring span : malleable cast iron. > : steel tube with insulating grips. Max. flexure of the frame under a measuring force of 10 N: see the table opposite Tungsten carbide tipped Ø 8 0,5 Max. 10 N LCD, digit height: 7 RS 232 Additional technical data: see page C-3 Wooden case in µm µm , Measuring range up to 1500 also available upon request. Dial Gauge Element for MICROMASTER Can replace the interchangeable anvils on AB series micrometers. Make finding the culmination point easier. Ensures a constant measuring force. Supplied as standard accessory with the ABY series micrometers. See next page C-7

30 E XTERNAL M ICROMETERS ISOMASTER AB with interchangeable Anvils Lightweight, but rugged anvil micrometers. Set No includes 4 interchangeable anvils with increasing length in steps of 25. Anvils are adjusted (and ed) in pairs, thus rendering any correction of the indication unnecessary whenever an anvil is exchanged. DIN 863 T3 (Style D16) NF E , : malleable cast iron; : steel tube with insulating grips. Max. flexure of the frame under a measuring force of 10 N: see the table opposite Tungsten carbide tipped 8 dia. 0,5 Max. 10 N Wooden case Declaration µm µm , Measuring range up to 1500 also available upon request. ± 1,5 0,01 Tungsten carbide tipped 8 dia. Max. 10 N Dial Gauge Element for AB Series Micrometers Can replace the interchangeable anvils on these micrometers. Make finding the culmination point easier. Ensures a constant measuring force. Supplied as standard accessory with the ABY series micrometers. Meas. element: 11 dia., 100 long. Dial gauge No : 40 dial diameter, two-way dial reading. With dial gauge and clamp Declaration C-8

31 E XTERNAL M ICROMETERS DIN 863 T3 (Style D15) NF E , : malleable cast iron; > : steel tube with insulating grips. Max. flexure of the frame under a measuring force of 10 N: see the table opposite Series ABY ISOMASTER with Adjustable Dial Gauge Element Similar to the AB series micrometers, but equipped with the adjustable dial gauge element No that helps you to find the culmination point easier with a constant measuring force. Tungsten carbide tipped 8 dia. 0,5 Max. 10 N Dial gauge: see on page C-8 Wooden case Declaration µm µm , Measuring range up to 1500 also available upon request. DIN 863 T3 (Style D16) NF E Tungsten carbide tipped 8 dia. Set includes 2 guard plates for the frame as well as 1 clamping nut Interchangeable Anvils for ABY Series ISOMASTER Set of 4 interchangeable anvils with increasing length in steps of 25. The anvils are adjusted and ed in pairs, thus eliminating the need for resetting the indication when exchanging either of them. Supplied as standard accessories with the AB series micrometers C-9

32 E XTERNAL M ICROMETERS MICRO-ETALON 225 Micrometers with a Dial Indicator Feature a mobile anvil along with a built-in dial indicator Ideal for compar - ative measurements on small part series Nominal dimension is set on the micrometer while deviations are read on the dial indicator Retractable anvil by means of a push-button Rotating dial for fine adjustment, also with adjustable tolerance markers. DIN 863 T3 (Style D13) Tungsten carbide tipped 6,5 dia. Model with small measuring faces: 2 dia., 5 long. 0,5 Anvil: 4,5 to 5,5 N Micrometer with vernier reading to 0,002. Dial indicator: 0,001. Dial indicator: ± 0,025 Micrometer: max. perm. error of 2 µm. Dial indicator: 1 µm. Dial indicator: repeatability limit of 0,5 µm. Plastic case ø2 5 Declaration Dial indicators to 0, Model with small measuring faces Protective Cover Made in transparent plastic Can be mounted on the bezel Protects the indicator against dust particles and liquids Prevents both tolerance markers from being accidentally displaced C-10

33 E XTERNAL M ICROMETERS DIN 863 T3 (Style D14) NF E Vernier reading to 0,002 ETALON MICROSPEL 280 These micrometers have a mobile anvil along with a 8 diameter clamping bore for mounting a sensor with linear action such as the TESA GT 21/22 electronic probe (also refer to section O). Specially designed for batch inspection of small precision parts. Tungsten carbide tipped 6,5 dia. Models with small measuring faces: 2 dia., 5 long. 0,5 Anvil: 2 up to 8 N, adjustable Meas. el ement: max. perm. error of 2 µm Mobile anvil: repeatability limit of 0,5 µm. Adjustable part support (except model with small measuring faces). Plastic case Declaration 5 ø Model with small measuring faces Important Electronic probe and micrometer stand are not part of the delivery scope and must be ordered separately. C-11

34 E XTERNAL M ICROMETERS Micrometers with Small Measuring Faces For measuring grooves, feather grooves, splines and other difficult to reach locations Small measuring faces specially made to check precision workpieces. Models MICROMASTER DIN 863 T3 (Style D3) 0, in Metric/Inch conversion Fixed measuring faces: tungsten carbide. Max. 10 N RS 232 interface, opto-coupled. Degree of protection (IEC 60529): IP54 or IP40 with use of the digital output For additional technical data: see page C-3. 5 Plastic case in Optional Accessory Lithium battery 3 V, 190 mah, type CR For information on cables etc., see section A. ø2 Measuring range 0 to 100: with a SCS calibration certificate. Measuring range > 100 : inspection report of conformity. Models ISOMASTER AD DIN 863 T3 (Style D3) NF E ,01 Fixed measuring faces: tungsten carbide. Max. 10 N Plastic case ø2 5 C-12

35 E XTERNAL M ICROMETERS Model TESAMASTER AD DIN 863 T3 (Style D3) NF E Vernier reading to 0,001 Scale division 0,1 Fixed measuring faces: tungsten carbide Max. 10 N Plastic case 5 ø Model MICRORAPID DIN 863 T3 (Style D3) NF E ,001. Parallax-free reading on vernier 100 divisions Fixed measuring faces: tungsten carbide. 1 Max. 10 N 5 Plastic case ø C-13

36 E XTERNAL M ICROMETERS Micrometers with One Spherical Measuring Face Measure wall thickness of tubing. Models MICROMASTER in DIN 863 T3 (Style D1) MICROMASTER: 0,001 or in ETALON: 0,002 Anvil: tungsten carbide (MICROMASTER) or titanium carbide hardcoating (ETALON). Tungsten carbide spindle. Anvil with a 3,5 spherical face (MICROMASTER) or a 3,25 one (ETALON). Spindle with a flat measur ing face. Max. 10 N Model ETALON RS 232 on MICROMASTER Other technical data on MICROMASTER: see page C-3. Plastic case Micrometers with Two Spherical Measuring Faces Rounded Measuring faces on anvil and spindle for measuring concave surfaces of workpieces, e.g. ball-bearing guides or walls of tubing. Models MICROMASTER DIN 863 T3 (Style D1) 0, in Tungsten carbide Spherical, 3,5 radius. Max. 10 N Additional technical data: see page C-3. in Plastic case C-14

37 E XTERNAL M ICROMETERS DIN 863 T3 (Style D1) NF E Series AAS ISOMASTER Rounded measuring faces for checking concave surfaces such as ball-bearing guides and tubing walls. 0,01 Measuring faces rounded to 3,25 Titanium carbide coated for model No Hardened steel for other models. 0,5 Max. 10 N Plastic case (TiC) Steel ball tip, hardened and lapped. Dull-chrome brass retainer. Spherical Element for External Micrometers Holder with a ball tip that fits on measuring faces having a 6,5 diameter Serve to measure tubing wall thickness or workpieces with concave surfaces and the like. Ball tip C-15

38 E XTERNAL M ICROMETERS Micrometers for Soft Materials With two large, round-edge measuring faces Measure the thickness of materials such as paper and plastic sheets, felt, cloth and other soft materials. Model MICROMASTER Non-rotating measuring spindle Without spindle lock. DIN 863 T3 (Style D6) 0, in Metric/Inch conversion Hardened steel Non-rotating, 20 dia. Flatness tolerance: 3 µm Tolerance in Parallelism: 6 µm Max. perm. error: 4 µm Max. 10 N RS 232 R1 Additional technical data: see page C-3. Plastic case in ø20 Model ISOMASTER AF DIN 863 T3 (Style D6) 0,01 Hardened steel Ø 15 Flatness tolerance: 3 µm Tolerance in Parallelism: 6 µm Max. 10 N Plastic case C

39 E XTERNAL M ICROMETERS DIN 863 T3 (Style D7) 0, in Micrometers for Gear Pitch Measurement Flanges with ring-shaped measuring faces for root tangent lengths Wk on gear pitches, distance between grooves and slots as well as other hard-to-reach locations. Metric/Inch conversion Hardened steel Non-rotating spindle 85 : 25 dia. > : 30 dia. Models MICROMASTER Non-rotating measuring spindle Without spindle lock. Suitable from module 0,5 Max. 10 N RS 232 Additional technical data: see page C-3. Plastic case W K in Models ISOMASTER AE DIN 863 T3 (Style D7) NF E ,01 Hardened steel 100 : 25 dia. > : 32 dia. Suitable from module 0,6 Max. 10 N Plastic case Micrometers for Gear Tooth Measurement Max. perm. error* Max. perm. error with Flatness Parallelism Max. with partial contact of full contact of the meas - flexure of the measuring face uring face (DIN 863-T1) the frame µm µm µm µm µm * Disregarding a rim of 1 as the measuring faces are being inspected. For enhanced accuracy, the micrometer should be calibrated in the position of use. C-17

40 E XTERNAL M ICROMETERS MICROMASTER with 7 Pairs of Interchangeable Measuring Inserts Non-rotating spindle Without spindle lock. 0, in Metric/Inch conversion Micrometer element with a max. perm. error of 4 µm 7,5 dia., non-rotating spindle. With a fixing bore for a measuring insert. Adjustable attachment on anvil for a measuring insert, with lock. Hardened steel Max. 10 N RS 232 in Additional technical data on page C-3 Plastic case Components of a Full Micrometer ø6.5 ø5 ø Single Micrometer in Full set of measuring inserts ø6.5 ø2 ø0.3 Includes one pair of the following inserts flat Ø 6, small, flat Ø spherical R = large, flat Ø narrow, flat 0, cone-shaped Ø 0,3/ knife-edged 0,3/60 Specially designed measuring faces also available upon request. ø ø12 R= C-18

41 E XTERNAL M ICROMETERS DIN 863 T3 (Style D12) NF E ,01 ETALON Basic for Tube Wall Thickness Measurement Barrel-shaped anvil for measuring the tube wall thickness and other curved workpieces. Hardened steel anvil. Tungsten carbide spindle 5 dia. on anvil. 6,5 dia. on spindle 0,5 Max. 10 N Plastic case ø5 1, Vernier reading to 0,002 Hardened steel anvils. Tungsten carbide spindle. Anvils: see drawing. Spindle: 6,5 dia. ETALON Basic with Two Interchangeable Anvils Universal micrometer for assembly Anvils have either a flat or a cylindrical measuring face. 0,5 Max. 10 N Plastic case ø C-19

42 E XTERNAL M ICROMETERS Micrometers with Prismatic Measuring Faces Measure test pieces with uneven of grooves such as milling cutters, taps, drills and spline shafts as well as odd polygons. Determine roundness errors on cylindrical surfaces. Angle of the prism aperture is designed for workpieces having a of 3 or 5 flutes. Models MICROMASTER DIN 863 T3 (Style D 10) 0, in Metric/Inch conversion Tungsten carbide tipped Angle of the prism aperture: 60 for 3-flute test pieces or 108 for 5-flute test pieces. 0,75 for 3-flute test pieces or 0,559 for 5-flute test pieces. Max. 10 N RS 232 Additional technical data on page C-3 Plastic case 3-flute test pieces (60 ) flute test pieces (108 ) in C-20

43 E XTERNAL M ICROMETERS Models ISOMASTER AS DIN 863 T3 (Style D 10) NF E ,01 Tungsten carbide tipped Angle of the prism aperture: 60 for 3-flute test pieces or 108 for 5-flute test pieces. 0,75 for 3-flute test pieces or 0,559 for 5-flute test pieces. Max. 10 N Plastic case Declaration 3-flute test pieces (60 ) flute test pieces (108 ) Cylindrical Setting Standards Hardened steel Fitted with plastic guard plates from nominal dimension of 20. Actual size engraved on the top face Declaration µm µm , , , ,2 1, ,2 1, ,5 1,5 C-21

44 E XTERNAL M ICROMETERS Micrometers for Thread Measurement Used for pitch diameter inspection Anvil with adjustable holder for mount ing a measuring insert with prismatic faces Fine screw adjustment and locking device Spindle has a fixing bore for a cone-shaped measuring insert. Models MICROMASTER AC DIN 863 T3 (Style D18) 0, in Metric/Inch conversion 30 measuring span Max. 10 N RS 232 Additional technical data on page C-3 Plastic case in Important Measuring Inserts and setting standards must be ordered separately. Models ISOMASTER AC DIN 863 T3 (Style D 18) NF E ,01 0,5 Max. 10 N Important Measuring Inserts and setting standards must be ordered separately. Plastic case Declaration C-22

45 E XTERNAL M ICROMETERS Hardened steel Fixing rod: 3,5 dia., 15,5 long Interchangeable Thread Inserts for TESA Micrometers Series AC With measuring faces specially designed for checking pitch diameters. Supplied in sets or pairs Pitch in Threads per in Threads per in ISO metric threads Whitworth threads Unified inch-treads UN, UNC, UNF 60 flank angle 55 flank angle 60 flank angle ,4 0, ,5 0, ,6 0, ,8 1, ,0 1, ,25 1, ,5 2, ,0 2, ,5 3, ,0 4, ,0 5, ,0 6,0 Set of 12 pairs Set of 10 pairs Set of 7 pairs ,4 6, Setting Standards for Screw Thread Micrometers Hardened steel Insulating sleeve marked with actual size Declaration 60 flank angle flank angle in C-23

46 E XTERNAL M ICROMETERS XB Wires for Screw Threads For measuring pitch diameter of threads using the three-wire method. Actual flank diameter d2 can either be determined arithmetically or with the aid of the relevant tables based on the measured actual size M Suitable for all standard micrometers with a measuring insert having a 6,5 diameter. Steel wires, hardened Wires are mounted on holders: 2-wire holder rests on anvil while the single wire holder is used on spindle side Single pairs are supplied in a plastic box, full set in a wooden case dd Declaration d2 M ,17 0,25/0, ,22 0, ,25 0, ,29 0,45/0, ,335 0,6 48/40 48/ ,455 0,7 0, ,53 0,9 32/ ,62 1,0 26/ ,725 1, ,895 1,5 18/16 18/ ,10 1, / ,35 2,0 12/11 12/ ,65 2,5 10/9 10/ ,05 3,0 /3,5 8/7 8/ ,55 4,0 /4, ,20 5,0/5,5 5/4.5 5/4.5 Set of 16 pairs ,17 3,20 Wires ISO metric Whitworth Unified inch-threads diameter threads threads UN, UNC, UNF dd Pitch in Number of threads per in Number of threads per in Micrometer Stands For micrometers up to 300 as well as many other hand-held tools. Clamp aperture: 16 (TESA) or 20 (ETALON) Lacquered cast iron base Tilt can be locked using a single bolt. TESA ETALON C-24

47 E XTERNAL M ICROMETERS INTERAPID Setting Standards Hardened steel Two flat and parallel measuring faces Cylindrical gauge block with plastic insulating grip and dullchrome shaft With lengths: 175 = = 13. Max. perm. error over the length: ± (1 + L/100) µm, L in Inspection report with actual measured length Declaration Guide Collars Make the positioning of INTERAPID setting standards fast and easy C-25

48 M ICROMETER H EADS Micrometer Heads Components coonly used for checking the various displacements on measuring fixtures, coordinate tables, microscopes, machines as well as other special appliances. Mounted on the cylindrical coupling shaft. Models MICROMASTER Without spindle lock. DIN 863 T2 (Style E) 0, in Metric/Inch conversion /39 Tungsten carbide tipped 6,5 dia ,5 Max. perm. error of 4 µm Max. 10 N Additional technical data on page C-3 RS 232 interface, opto-coupled ø6.5 ø12 h h h h6 DIN 863 T2 (Style E) NF E Model ISOMASTER AR Without spindle lock. 0,01 Tungsten carbide tipped 6,5 dia. ø6.5 ø12h6 ø18.6 ø12.2 0,5 Max. perm. error of 3 µm h6 Max. 10 N Declaration C-27

49 M ICROMETER H EADS Model TESAMASTER AR Without spindle lock. DIN 863 T2 (Style E) Vernier reading to 0,001 Scale division to 0,1 Tungsten carbide tipped ø6.5 ø12 h6 ø21 ø11.5 6,5 dia h6 0,5 Max. perm. error of 2 µm Max. 10 N Declaration ETALON 266 Micrometer Heads With or without spindle lock. DIN 863 T2 (Style E) NF E Vernier reading to 0,002 Tungsten carbide tipped 0,5 ø6.5/8 ø12 h6/10 h6 ø18.6 Max. perm. error of 3 µm Declaration Spindle D lock Ø 6,5 12h Ø 8 12h Ø 6,5 10h6 C-28

50 D EPTH M ICROMETERS DIN 863 T2 (Style T) 0, in Metric/Inch conversion Non-rotating spindle Measuring rods with hardened steel ends Depth Micrometers With interchangeable measuring rods provided in sets. The rods are adjusted in steps, each with a step length of 30 or 25, thus eliminating the need for a new display setting when rods are exchanged. Models MICROMASTER Non-rotating measuring rod. Sets with a step length of dia. measuring rods 30 RS 232 data output 0,5 Max. perm. error (meas. element): 3 µm Plastic case in x x 15 Optional Accessories pieces rod set Models ISOMASTER AQ Measuring rods with a step length of 25 or 1 in. DIN 863 T2 (Style T) NF E ,01 Measuring rods with hardened steel ends 3 dia. measuring rods. Measuring face on the base: see table 0,5 Max. perm. error of the measuring element: 3 µm Plastic case x x x x 15 Declaration C-29

51 T OOL S ETS Tool Sets Caliper DIN 862 TESA Swiss Tool Set TESA Swiss Tool Set Consisting of: Vernier caliper TESA SWISSCAL ,02 1 Depth foot 1 External micrometer TESA ISOMASTER ,01 1 Suited plastic case Depth foot Micrometer Stainless steel, hardened Technical data on page B-8 Stainless steel, hardened. 75 x 6 measuring faces DIN 863 T1 NF E Tungsten carbide tipped Technical data on page C-6 Additional data C-30

52 T OOL S ETS Caliper DIN 862 Depth foot Stainless steel, hardened Technical data on page B-5 Stainless steel, hardened 75 x 6 measuring face TESA Duo-Set 1 Micrometer DIN 863 T1 NF E TESA Duo-Set 1 Consisting of: Tungsten carbide tipped Technical data on page C-6 Additional data Dial caliper TESA CCMA-M ,02 1 Depth foot 1 External micrometer TESA ISOMASTER ,01 1 Suited plastic case Caliper DIN 862 Depth foot Stainless steel, hardened Technical data on page B-5 Stainless steel, hardened 75 x 6 measuring face TESA Duo-Set 2 Micrometer DIN 863 T1 NF E TESA Duo-Set 2 Consisting of: Tungsten carbide tipped Technical data on page C-4 Additional data Dial caliper TESA CCMA-M ,02 1 Depth foot 1 External micrometer TESAMASTER ,001 1 Suited plastic case C-31

53 T OOL S ETS Caliper DIN 862 Depth foot Stainless steel, hardened Technical data on page B-4 TESA Duo-Set 8 Stainless steel, hardened. 75 x 6 measuring face TESA Duo-Set 8 Consisting of: Micrometer DIN 863 T1 NF E Caliper TESA Shop-Cal capa µ system ,01 1 Depth foot 1 External micrometer TESA ISOMASTER ,01 1 Suited plastic case Tungsten carbide tipped Technical data on page C-6 Additional data Caliper DIN 862 Depth foot Stainless steel, hardened Technical data on page B-4 TESA Duo-Set 9 Stainless steel, hardened 75 x 6 measuring face TESA Duo-Set 9 Consisting of: Micrometer DIN 863 T1 NF E Caliper TESA TESA Shop-Cal capa µ system ,01 1 Depth foot 1 External micrometer TESAMASTER ,001 1 Suited plastic case Tungsten carbide tipped Technical data on page C-4 Additional data C-32

54 T OOL S ETS Caliper DIN 862 Stainless steel, hardened. Technical data on page B-4 Depth foot Stainless steel, hardened. TESA Duo-Set 16 Micrometer 75 x 6 measuring face TESA Duo-Set 16 Consisting of: DIN 863 T1 NF E Tungsten carbide tipped Technical data on page C-3 SCS calibration certificate Caliper TESA Shop-Cal capa µ system ,01 1 Depth foot 1 External micrometer TESA MICROMASTER EASY ,001 1 Suited plastic case Caliper DIN 862 Stainless steel, hardened. Technical data on page B-3 Depth foot Stainless steel, hardened. TESA Duo-Set 13 Micrometer 75 x 6 measuring face TESA Duo-Set 13 Consisting of: DIN 863 T1 NF E Tungsten carbide tipped Technical data on page C-3 SCS calibration certificate Caliper TESA-Cal IP ,01 1 Depth foot 1 External micrometer TESA MICROMASTER IP ,001 1 Suited plastic case C-33

55 T OOL S ETS Caliper DIN 862 Stainless steel, hardened. Technical data listed on page B-4 TESA Duo-Set 14 Depth foot Stainless steel, hardened TESA Duo-Set 14 Consisting of: Micrometer 75 x 6 measuring face Caliper TESA-Cal IP ,01 1 Depth foot 1 External micrometer TESA MICROMASTER EASY ,001 1 Suited plastic case DIN 863 T1, NF E Tungsten carbide tipped Technical data listed on page C-3 SCS calibration certificate Caliper DIN 862 Stainless steel, hardened. Technical data listed on page B-3 TESA Duo-Set 15 Depth foot Stainless steel, hardened TESA Duo-Set 15 Consisting of: Micrometer 75 x 6 measuring face C Caliper TESA-Cal IP67, RS ,01 1 Depth foot 1 External micrometer MICROMASTER IP54, RS ,001 1 Suited plastic case DIN 863 T1, NF E Tungsten carbide tipped Technical data listed on page C-3 SCS calibration certificate

56 Internal Measurement D-1

57 I NTERNAL M ICROMETERS DIN 863 T4 (Style C1) 0, in TESA IMICRO capa µ system with Digital Display A successful combination of the patented TESA capacitive system with the IMICRO unique cone. Metric/inch Conversion LCD, 7 digit height Floating zero Display lock Measuring faces for application ranges 3,5 to 12 : hardened steel (HV30 770) 11 to 100 : TiN hard-coating (HV5 2300) 100 to 300 : carbide tipped (HV5 1300) A B C RS 232 opto-coupled, bidirectional 3 V lithium battery 1 to 2 a ( 2000 h/a) Automatic shut down after 10 min. Display setting is retained as long as power supply remains stable. 10 C to 40 C -10 C to 60 C 80%, non condensing Measuring element IP54 (IEC 60529) or IP40 with active data output Plastic case TESA s calibration certificate Declaration in µm µm A B C , , , , ,5 5, , ,5 6, , ,5 2, ,5 2, ,5 2, , , , Optional Accessory Lithium battery - 3 V, 190 mah, type CR 203 For ordering information on cables etc., see section A. Suited carrying cases on page D-8. D-3

58 I NTERNAL M ICROMETERS TESA IMICRO capa µ system with Digital Display Partial Sets A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. DIN 863 T4 (Style C1) 0, in Metric/inch Conversion LCD, 7 digit height Floating zero Display lock D-4 Partial sets including Elements Measuring heads Setting rings Extensions ,5 6, , , , ,5 5, ,5 6, Set composition for the application range from 200 to 300 available upon request Measuring Element Measuring heads Measuring faces for application ranges 3,5 to 12 : hardened steel (HV30 770) 11 to 100 : TiN hard-coating (HV5 2300) 100 to 300 : carbide tipped (HV5 1300) RS 232 opto-coupled, bidirectional 3 V lithium battery 1 to 2 a ( 2000 h/a) Automatic shut down after 10 min. Display setting is retained as long as power supply remains stable. 10 C to 40 C -10 C to 60 C 80%, non condensing Measuring element IP54 (IEC 60529) or IP40 with active data output Plastic case TESA s calibration certificate Declaration

59 I NTERNAL M ICROMETERS DIN 863 T4 (Style C1) 0, in TESA IMICRO capa µ system with Digital Display Full Sets A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. Metric/inch Conversion LCD, 7 digit height Floating zero Display lock Measuring faces for application ranges 3,5 to 12 : hardened steel (HV30 770) 11 to 100 : TiN hard-coating (HV5 2300) 100 to 300 : carbide tipped (HV5 1300) RS 232 opto-coupled, bidirectional 3 V lithium battery 1 to 2 a ( 2000 h/a) Automatic shut down after 10 min. Display setting is retained as long as power supply remains stable. 10 C to 40 C -10 C to 60 C 80%, non condensing Measuring element IP54 (IEC 60529) or IP40 with active data output Plastic case TESA s calibration certificate Full sets including Single micrometers Setting rings Extensions ,5 6, , , , ,5 5, ,5 6, Declaration D-5

60 I NTERNAL M ICROMETERS TESA IMICRO with Analogue Indication Metric Self-centring and self-aligning internal micrometers. The high-precision thread machined into the measuring cone, combined with the measuring bolts specially arranged to provide 3-line contact, make them the only micrometers in the world that respect the ABBE principle. Measure depth, reliably. DIN 863 T4 (Style C1) NF E Measuring faces for application ranges from 3,5 to 12 : hardened steel (HV30 770) 11 to 100 : TiN hard-coating (HV5 2300) 100 to 300 : carbide tipped (HV5 1300) Application ranges from 3,5 to 200 in a shipping box 200 to 300 in a wooden case with 1 extension of 150 (No ) B A C µm µm A B C ,5 4 0, , ,5 0, , ,5 5,5 0, , ,5 6,5 0, , , ,5 2, , ,5 2, , ,5 2, , , , , , , , , , , , , , , , , , , , , , , , , D-6

61 I NTERNAL M ICROMETERS DIN 863 T4 (Style C1) NF E Measuring faces on models from 3,5 to 12 : hardened steel, HV30 770; 11 to 100 : titanium nitride (TiN) hard-coating to HV to 200 : tungsten carbide tipped to HV Additional technical data: see on the previous page. Setting rings on page D-17. TESA IMICRO with Analogue Indication Full Metric Sets Plastic case or suitcase Full sets including Single micrometers Setting rings Extensions BAE 3,5 6, , , , ,5 5, ,5 6, BAF BAG BAH BAJ BAK D-7

62 I NTERNAL M ICROMETERS Accessories for both TESA IMICRO and TESA IMICRO capa µ system Extensions for Deep Hole Measurement DIN 863 T4 (Style C1) Centring Devices for TESA IMICRO Moulded Cases for Single Micrometers, Full Sets and Partial Sets Single micrometers , Micrometer sets Full and partial micrometer sets ,5 6, IMICRO Adapter Every TESA IMICRO (SM versions or models with analogue indication) can easily be updated by means of the adapter used for coupling the measuring head with the new capa μ system element. D-8 Capa µ system element Adapter Application range Note: To ensure accuracy, the micrometer needs to be recalibrated.

63 I NTERNAL M ICROMETERS DIN 863 T4. Style C1 for models 6 to 10 or style C2 for all other models 0, in Metric/inch conversion TESA ALESOMETER capa µ system with Digital Display Fitted with a TESA patented capacitive measuring system Bore gauges with 3-line contact. All TESA ALESOMETER are made to measure through and blind bores as well as short centring shoulders, except for the models covering the application range from 6 to 10. LCD, digit height 7 Floating zero Display lock Measuring inserts for application range 6 to 10 : steel, hardened to HV to 300: tungsten carbide tipped, HRC 70. Measuring head B RS 232 opto-coupled, bidirectional A C 3 V lithium battery 1 to 2 a ( 2000 h/a) Automatic shut down after 10 min. Display setting is retained as long as power supply remains stable. 10 C to 40 C -10 C to 60 C 80%, non condensing For the measuring element IP54 (IEC 60529) or IP40 with active data output 100 in a plastic case > 100 in a wooden case Single Bore Gauges, Complete in µm µm A * B C , , , ,3 6, , ,3 6, , ,3 6, , ,3 6, ,3 8, ,3 8, ,3 8, ,3 8, ,3 14, ,3 14, ,3 14, ,3 14, ,3 14, , , , , , , , , Optional Accessory Lithium battery 3 V, 190 mah, type CR 2032 * Not applicable for models from 10 since the measuring inserts are close to the micrometer front face. For ordering information on setting rings, see both pages D-12 and D-17, or report to page D-10 for storage cases or to section A for connecting cables and the like. D-9

64 B ORE G AUGES TESA ALESOMETER capa µ system with Digital Display Partial Sets plus Components Fitted with TESA patented capacitive measuring system Models that cover the application range from 6 to 10 can only measure through bores All other partial sets also allow blind bores as well as short centring shoulders to be inspected. DIN 863 T4. Style C1 for models 6 to 10 or C2 for all other models 0, in Measuring inserts for application range 6 to 10 : steel, hardened to HV to 300: tungsten carbide tipped to HRC 70. For additional technical data, see on page D-9 or D-12 for setting rings. 100 m in a plastic case, > 100 m in a wooden case Measuring Setting Storage Partial sets including Measuring heads Connectors elements rings cases , , , , , , Set composition for application range from 100 to 300 available upon request Measuring Measuring Setting Storage heads Connectors element rings cases Each storage case can contain a single measuring head only. D-10

65 B ORE G AUGES NF E Type 1 for models 6 to 10 or type 2 for all other models Measuring inserts for application range 6 to 10 : steel, hardened to HV to 300 : tungsten carbide tipped to HRC 70. ROCH ALESOMETER with Analogue Indication, Metric Bore gauges with 3-line contact. All ROCH ALESOMETER let you measure not only through bores, but also blind bores as well as centring shoulders, except for the models covering the application range 6 to 10. Wooden case Declaration Calibration certificate upon request Measuring head B Single Bore Gauges, complete A C E µm A * B C E , ,2 3 54, , ,2 3 54, ,5 0, ,3 6,5 64, ,5 15 0, ,3 6,5 64, ,5 0, ,3 6,8 64, ,5 20 0, ,3 6,8 64, , ,3 8, , , ,3 8, , , ,3 8, , , ,3 8, , , ,3 14,5 108,7 188, , ,3 14,5 108,7 188, , ,3 14,5 108,7 188, , ,3 14,5 126,7 206, , ,3 14,5 126,7 206, ,01 7 0, ,7 233, ,01 7 0, ,7 233, ,01 8 0, ,7 233, ,01 8 0, ,7 233, ,01 9 0, ,7 233, ,01 9 0, ,7 233, ,01 9 0, ,7 233, ,01 9 0, ,7 233,5 * Not applicable for models from 10 since the measuring inserts are close to the micrometer front face. D-11

66 B ORE G AUGES ROCH ALESOMETER with Analogue Indication Full Metric Sets NF E Type 1 for models 6 to 10 or type 2 for all other models. Measuring inserts for application range 6 to 10 : steel, hardened to HV to 300 : tungsten carbide tipped to HRC 70. For any additional data, see on page D-11 Wooden case Declaration Calibration certificate upon request Full sets including Single bore gauges Setting rings Extensions , , , , , , Extensions Setting rings Hardened steel. Insulated body against hand warmth. Declaration NF E , type A2 Extensions for Depth Increase ROCH Setting Rings , , Steel, hardened to 60 HRC Bore related tolerance ± (3 µm D) µm D = Nominal diameter in (1 µm D) µm Shipping box Calibration certificate upon request D-12

67 I NTERNAL M ICROMETERS DIN 863 T4 (Style C2) NF E ,002 TESA TRI-O-BOR Self-centring and self-aligning internal micrometers with 3-line contact with the part being inspected. These micrometers measure trough holes, blind bores and short centring shoulders. 0,01 Tungsten carbide tipped measuring bolts and cone Supplied with 1 heat insulating sleeve (No ), 2 keys (No ), 1 screwdriver (No ). Shipping box A Measuring Bolts with Special Design Used for ISO metric threads (M16 x 0,5 to M150 x 6), UN, UNC or UNF unified imperial threads (60 ) and Whitworth threads (55 ). Measuring bolts with special profiles can also be made available. Both the size and type of the thread or the workpiece to be measured must be specified in your inquiries or purchase orders (see drawings). P e d1 d2 B C l L R µm µm A B C R L d d D D D-13

68 I NTERNAL M ICROMETERS TESA TRI-O-BOR Full Sets For technical data, see on page D-13. For setting rings, report to page D-17. Supplied with 1 extension for depth increase (150 ) No , 1 heat insul ating sleeve No , 2 keys No , 1 screwdriver No Protective case or carrying case Metric Executions Full sets including Single micrometers Setting rings Extensions BSC BSD BSF BSG TESA TRI-O-BOR Accessories Extension for Depth Increase Protective or Plastic Carrying Cases for TESA TRI-O-BOR D-14 Single micrometers Full micrometer sets in

69 I NTERNAL M ICROMETERS Models from 10 to 100 : DIN 863 T4 (Style C2) NF E Models from 5 to 100 : 0,002 Models 100 to 200 with vernier reading: 0,01. Measuring bolts on models from 5 to 100 : hardened steel. 100 to 200 : tungsten carbide tipped. Max. perm. error for models covering the application ranges from 5 to 40 = 3 µm 40 to 100 = 4 µm 100 to 200 = 5 µm Repeatability limit for models covering the application ranges from 5 to 40 = 3 µm 40 to 100 = 4 µm 100 to 200 = 5 µm Protective case or carrying case A ETALON INTALOMETER 531 Made to check through holes, blind bores and short centring shoulders. All models covering the application range up to 100 have sloped bolts extending beyond the front face of the measuring head. 25 B C A B C x x ,5 2 x , x ,5 3 x , x ,5 3 x , x , , x x x x Measuring range up to 300 available upon request. D-15

70 I NTERNAL M ICROMETERS ETALON INTALOMETER 531 Metric Tool Sets For technical data, see page D-15. For setting rings, report to page D-17. Protective case or carrying case Full sets including Single micrometers Extensions Setting rings , , , , , , , , , Single Partial sets including micrometers Measuring bolts Extensions * * Bolt set provided with the single micrometer No D-16

71 S ETTING S TANDARDS TESA Setting Rings and Setting Masters Shipping box Setting rings µm* µm** ,5 1, ,5 1,5 1, ,5 1, ,5 1, ,5 1,5 1, ,5 1, ,5 1, ,5 1,5 1, ,5 1, ,5 1, ,5 1,5 1, ,5 1, ,5 2, ,5 2, ,5 4 Setting master , * Making no allowance for a rim of 1. ** All listed values are determined through a 2-point measurement taken at half - height of the setting ring. The measuring direction is marked with 2 strokes. The measured actual dimension is engraved on every setting master. D-17

72 Electronic indicators, Dial Gauges, Precision Indicators F-1

73 E LECTRONIC I NDICATORS TESA DIGICO 205 and 305 Dual LC Display. Mechanical tolerance marks. Dimensions according to DIN 878. Main functions ON/Auto OFF Data output Counting sense reversal Keypad lock. Combined analogue and numerical display 6-decade LC display field plus minus sign 10 x 5 Digit size (H x L) Resolution to 0,01 = ±0,25 Resolution to 0,001 = ±0,025 MI or MIE type: metric/inch conversion Glass scale with incremental divisions, capacitive 2 m/s Full-metal housing with front face in polyamide. Stainless steel plunger. M2,5 mounting thread for the measuring insert. 2N RS232, opto-coupled 3V lithium battery, type CR year to 2 years TESA DIGICO 205 / in / in µm µm DIGICO 205 M 12,5 / 0,01 / DIGICO 205 MI 12,5 / 0.5 0,01 / TESA DIGICO DIGICO 305 M 12,5 / 0,001 / DIGICO 305 MI 12,5 / 0.5 0,001 / TESA DIGICO 305 IP DIGICO 305 MIE 12,5 / 0.5 0,001 / C to 40 C 10 C to 60 C 80% EN EN g 7 7 Shipping case including a lithium battery ,1 121,5 28,5 ø57,1 134,4 ø57,1 18,4 ø8 h6 68,4 ø4 27 Dimensions fully meet DIN F-4

74 E LECTRONIC I NDICATORS Combined analogue and numerical display 6-decade LC display field plus minus sign 10 x 5 Digit size (H x L) Resolution to 0,01 = ±0,25 Resolution to 0,001 = ±0,025 MI or MIE type: metric/inch conversion Glass scale with incremental divisions, capacitive TESA DIGICO 400 and 500 Measuring modes ABS/REL. Dual LC Display. Display rotation through 270. Same goes for the key functions. Mechanical tolerance marks. Symbols for both limit values. Measuring functions and modes ON Auto OFF PRESET mode Tolerance mode Data output Counting sense reversal Keypad lock Metric/Inch units Full RESET. 2 m/s Full-metal housing with front face in polyamide. Stainless steel plunger. M2,5 mounting thread for the measuring insert. RS232, opto-coupled 3V lithium battery, type CR year to 2 years 10 C to 40 C 10 C to 60 C 80% EN EN Shipping case including one lithium battery TESA DIGICO 400 / in / in µm µm N g Digico 405 MI 12,5 / 0.5 0,01 / < Digico 410 MI 25 / 1 0,01 / < TESA DIGICO Digico 505 MI 12,5 / 0.5 0,001 / < Digico 510 MI 25 / 1 0,001 / < TESA DIGICO 505 IP Digico 505 MIE 12,5 / 0.5 0,001 / < ,4 28,5 121,5 ø57,1 134,4 ø57,1 53,1 ø8 h6 68,4 ø4 27 Dimensions fully meet DIN F-5

75 E LECTRONIC I NDICATORS TESA DIGICO 600 Measuring modes ABS/REL. Dual LC Display. Display rotation through 270. Same goes for the key functions. Mechanical tolerance marks. Symbols for both limit values. Measuring functions and modes ON Auto OFF PRESET mode Tolerance mode Value storage mode Max Min Max-Min (TIR) Data output Counting sense reversal Keypad lock Metric/Inch units Full RESET. Combined analogue and numerical display 6-decade LC display field plus minus sign 10 x 5 Digit size (H x L) Resolution to 0,01 = ± 0,25 Resolution to 0,001 = ± 0,025 MI or MIE type with metric/inch conversion Glass scale with incremental divisions, capacitive 2 m/s Full-metal housing with front face in polyamide. Stainless steel plunger. M2,5 mounting thread for the measuring insert. RS232, opto-coupled 3V lithium battery, type CR year to 2 years 7 10 C to 40 C 10 C to 60 C 80% 52,5 15,3 Ø8 h6 106, ,5 Ø57,1 EN EN Shipping case including a lithium battery Ø4 Dimensions fully meet DIN ,4 TESA DIGICO 600 / in / in µm µm N g Digico 605 MI 12,5 / 0.5 0,001 / < Digico 610 MI 25 / 1 0,001 / < F-6

76 E LECTRONIC I NDICATORS Combined analogue and numerical display 6-decade LC display field plus minus sign TESA DIGICO 705 Use in conjunction with bore gauges with 2-point contact. Allows setting of the dial gauge on the smallest setting ring value. Same functions as DIGICO x 5 Digit size (H x L) Resolution to 0,01 = ± 0,25 Resolution to 0,001 = ± 0,025 MI or MIE type with metric/inch conversion Glass scale with incremental divisions, capacitive 2 m/s Full-metal housing with front face in polyamide. Stainless steel plunger. M2,5 mounting thread for the measuring insert. RS232, opto-coupled 3V lithium battery, type CR year to 2 years 10 C to 40 C 10 C to 60 C 80% TESA DIGICO 705 / in / in µm µm N g Digico 705 MI 12,5 / 0.5 0,001 / < Optional accessories available for all TESA DIGICO 200 to 700 EN EN Shipping case including a lithium battery Lithium battery, type CR2032, 3V, 190 mah External power supply Mains adapter Cable EU for mains adapter Cable US for mains adapter Measuring inserts listed on page F-42 Backs and retraction devices detailed on page F-45 For information on connecting cables, refer to chapter A Digico F-7

77 E LECTRONIC I NDICATORS TESA DIGICO 12 Made to measure in extreme workshop conditions Water and coolant resistant (IP65) 44 dial diameter Lets you take advantage of the mechanics combined with digital reading. 5-digit LC display + sign 6 digit height Zero-setting of display TESA DIGICO 12 Standard 44 dial casing diameter. Water and coolant resistant (IP65). RS 232 SIMPLEX data output combined with external power supply. Inductive measuring system, patented. Choice between absolute («ABS») and relative («REL») measuring modes. Numerical display. Possible setting of PRESET value to ±130. Inverse measuring direction. Direct conversion of the metric/inch units. Automatic shut down. 20 µm 5 µm 0,5 to 0,9 N (± 0,15 N) Max. 2 m/s Number of measurements per second: 7 Working temper - ature range: + 5 C to + 40 C 3V lithium battery, type CR Battery life > 3500 hours Ø 8 h6 Ø 4 Ø RS g EN IP65 (IEC 529) Shipping case including 1 lithium battery, type CR 2032 (order No ). 1,65 8,54 6,4 ø 1,5 Declaration Models 0,01 with report. Models 0,001 without report. /in in Module IP65 indicators with electronic module protected against the penetration of liquids ,5/0.5 0, IP ,5/0.5 0,001 / 0, / IP65 IP65 indicators with mechanics and electronics protected against the penetration of liquids ,5/0.5 0, IP ,5/0.5 0,001 / 0, / IP65 F-10

78 E LECTRONIC I NDICATORS LCD, 5 digits + sign 6 digit height Zero-setting of display 4 µm TESA DIGICO 12 HP High-precision measuring system. Water and coolant resistant (IP65). Combined analogue/digital display. Analogue readout from ±0,025 to ±1,25. NOR/MIN/MAX/MAX-MIN measuring modes. 44 dial casing diameter. RS232 data output, combined with external power supply. Inductive measuring system, patented. Zero-setting of display. Direct conversion of the metric/inch units. Automatic shut down. Can also be locked. 2 µm 0,4 to 0,75 N (± 0,15 N) Max. 2 m/s Number of measurements per second: 9 Working temperature range: + 5 C to + 40 C 3V lithium battery, type CR 2032 /in in IP65 indicator HP with electronic module protected against the penetration of liquids / ,001 / 0, / IP65 IP65 indicator HP with mechanics and electronics protected against the penetration of liquids / ,001 / 0, / IP65 Battery life > 4000 hours RS g EN IP65 (IEC 529) 1 lithium battery, type CR Order : ,65 8,54 6,4 ø 1, Ø 8 h6 Ø 4 Ø Accessories Clamping lug Upper lift lever Lower lift lever RS232 connecting cable along with external power supply 3 V lithium battery, type CR 2032, 190 mah For information on connecting cables, refer to chapter A 19,05 9,5 6, ø 6,4 14,3 26, A-11 F-11

79 P RECISION I NDICATORS TESA CARY Microcomparators MCA-8 The absolute high precision Specially designed for high precision measurement by comparison (0,8 µm) Ideal for checking axial and radial runouts with a very low hysteresis (0,3 µm). TESA CARY precision mechanism mounted parallel to the measuring axis in compliance with the Abbe principle. Streamlined steel case for high rigidity. High precision throughout the measuring travel. Very low measuring force (from 150 mn). Non-rotating dial. Quickly set to zero by moving the pointer with just a thumb grip. Low sensitivity to temperature variations. DIN 879 Non-rotating dial Fine setting when moving the pointer Full-metal dial casing. Stainless steel plunger, hardened. Adjustable tolerance marks M2,5 mounting thread for the measuring insert Mounted insert with a 3 dia. steel ball tip 110 g Plastic case Regular models mn Range for zero-setting MCA ,001 0, ± 0, MCA ,001 0, ± 0, MCA ,001 0, ± 0,006 Lateral model MCA8-2-L 0,001 0, ± 0,006 Accessory On request Sealing bellow (to be specified when ordering) Precision ø 8 h6 Max. perm. errors, Gges 0,001 0,8 µm 4 ø 4 h5 Repeatability limit, r 0,3 µm F-12 Max. hysteresis, fu 0,3 µm

80 P RECISION I NDICATORS DIN All sizes to EN ISO 463 Ball-bearing plunger Full-metal dial casing. Stainless steel plunger, hardened. Adjustable tolerance marks. Coupling thread for the lifting cable. M2,5 mounting thread for the measuring insert. ETALON Basic Precision Indicators The absolute high precision Remarkably reliable, even when constantly used for series inspection Specially made for comparative measurements demanding a very low measurement uncertainty Measure axial and radial runouts with the lowest hysteresis. Shockproof movement with gear-lever transmission and long dead travel. Large, non-dazzling dial for easy readout. No coarse reading errors as the measuring travel is limited to less than one revolution. Fine adjustment and protective knob to prevent unintentional pointer displacement. 1 N Mounted insert with a 3,175 dia. steel ball tip. Also with lifting cable. Suited plastic case Declaration Regular model ,001 0,1 3, Model to IP54, protected against the penetration of liquids ,001 0,1 3, Precision 23 9 Max. perm. errors in one direction throughout the measuring range, Ge over any local measuring range including 10 scale divisions, Gt in both measuring directions throughout the measuring range, Gges 0,001 1 µm 0,7 µm 1,2 µm ø8 h6 R ,5 108 Repeatability limit, rw 0,5 µm ø4 Max. hysteresis, fu 0,5 µm 6 A-13 F-13

81 D IAL G AUGES Precision Dial Gauges 0,1 dial readout / 40, 58 or 80 dial diameter EN ISO 463 Factory standard 0,1 1,1 (40 dia.) 1,5 (58 dia.) 2,2 (80 dia.) Rotating dial Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Without shockproof mechanism M2,5 mounting thread for the measuring insert N ROCH dial gauges , , , , , , , , , , , , , , ,0 See table opposite Mounted insert with a 3,175 dia. steel ball tip Suited plastic case Declaration ,5 7,5 7,5 13 7,5 7,5 13 / 23 9,5 7,5 23 7,5 7,5 ø ,5 ø 8 ø 37 15,5 83 ø 58 ø 52 (108) ø 58 ø 52 (118 / 138) ø 80 7,5 ø M 2,5-6H ø ,5 ø 8 ø 5 M 2,5-6H Maximum permissible errors for a metrological characteristic (MPE) 0,1 10 Deviation span 40 µm Deviation span within the local measuring span of 1 25 µm Total deviation span 55 µm / 53 16,5 ø 8 ø 5 M 2,5-6H / Similar model: ,5 ø 8 ø 5 M 2,5-6H (153) Repeatability limit 15 µm Max. hysteresis 15 µm F-14

82 D IAL G AUGES EN ISO 463 Factory standard 0,01 2,2 Rotating dial. Regular models with or without dial lock. Full-metal casing. Fixing shank and plunger in hardened stainless steel. With or without shockproof mechanism Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. 3 dia. ball tip, already mounted. Cardboard box Precision Dial Gauges 0,01 dial readout/ 40 dial diameter These precision dial gauges combine excellent metrological properties with extra-long life. Smooth full-jewelled movement with rubies. Full-metal dial casing and bezel. Fully shockproof mechanism. Non-dazzling dial. Swiss Made ø37 6 ø ø10 ø8 h6 ø4 ø5 ø40 (77.4) ø37 6 ø ø10 ø8 h6 ø5 ø40 TESA dial gauges YR 0,01 5 5,4 0, YR 0,01 5 5,4 0, YR 0,01 5 5,4 0, YE 0,01 5 5,4 0, MERCER dial gauges X ,01 5 5,4 0, ,01 5 5,4 0, TESA IP54 dial gauge, protected against the penetration of liquids YE 0,01 5 5,4 0, Permissible limits of a metrological characteristic (MPE/MPL) Deviation span Deviation span within the local measuring span 0,10 Total deviation span Repeatability limit Max. hysteresis Measuring force Model IP54 0,01 0,01 12 µm 6 µm 14 µm 33 µm µm 33 µm µm 1,4 N 2 N A-15 F-15

83 D IAL G AUGES Precision Dial Gauges 0,01 dial readout / 40 dial diameter Remarkable for their robustness, these precision dial gauges are essential for the workshop. Smooth jewelled movement with rubies. Full-metal dial casing. Optimum protection against shocks. Swiss Made. EN ISO 463 Factory standard 0,01 2,2 Rotating dial ø ø10 ø8 h6 ø4 ø40 (77.4) Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Adjustable tole - rance marks. M2,5 mounting thread for the measuring insert. 3 dia. ball tip, already mounted Cardboard box ø3 ø5 COMPAC dial gauge 353 0,01 5 5,4 0, COMPAC IP54 dial gauge, protected against the penetration of liquids 353E 0,01 5 5,4 0, COMPAC dial gauge with limited reading range 353S 0,01 ±0,2 3,3 0, Permissible limits of a metrological characteristic (MPE/MPL) Deviation span Deviation span within the local measuring span 0,10 Total deviation span Repeatability limit Max. hysteresis Measuring force Model IP54 ± 0,2 5 7 µm 12 µm 5 µm 6 µm 9 µm 14 µm 3 µm 3 µm 3 µm 3 µm 1,4 N 1,4 N 2 N F-16

84 D IAL G AUGES EN ISO 463 Factory standard 0,01 Precision Dial Gauges 0,01 dial readout / 40 dial diameter The model is specially advantageous whilst the other model is particularly robust. 2,2 Rotating dial Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. With or without shockproof mechanism Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. See table opposite Mounted insert with a 3,175 dia. steel ball tip Plastic case or cardboard box Declaration ROCH dial gauges N ,01 3 3,4 0, * 1, ,01 3 3,4 0, * 1,4 ETALON dial gauge ,01 5 0, * With extra red tinted reverse ing. 6, ,5 / , ø 40 11,5 M 2,5-6H ø 8 ø 4 ø 37 15,5 6 8 (78 / 74,5) ø8 h6 ø ø , Maximum permissible errors for a metrological characteristic (MPE) 0, Deviation span 10 µm 12 µm Deviation span within the local measuring span of 0,1 5 µm 6 µm Total deviation span 12 µm Repeatability limit 3 µm 3 µm Max. hysteresis 3 µm F-17

85 YR 0, , YR 0, , YE 0, , , , , , TESA IP54 dial gauges, protected against the penetration of liquids YR 0, , YE 0, , TESA dial gauge with limited reading range YE 0,01 ± 0,4 4 1, ± 0, µm 15 µm 5 µm 8 µm 9 µm 17 µm 3 µm 3 µm 3 µm 3 µm 1 N 1,5 N 2,2 N ø10 50 (111) 43 6 ø8 h6 ø57 ø53 6 D IAL G AUGES Precision Dial Gauges 0,01 dial readout / 57 or 58 dial diameter EN ISO 463 Factory standard 0,01 1,5 TESA dial gauges MERCER dial gauges Rotating dial. Regular models with or without dial lock. Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. With or without shockproof mechanism Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. 3 dia. ball tip, already mounted Cardboard box Permissible limits of a metrological characteristic (MPE/MPL) Deviation span Deviation span within the local measuring span 0,10 Total deviation span (142.5) ø58 ø Repeatability limit Max. hysteresis Measuring force Models IP54 ø5 ø ø8 h6 68 ø4.5 F-18 ø5 ø

86 D IAL G AUGES EN ISO 463 Factory standard Precision Dial Gauges 0,01 dial readout / 58 dial diameter 0,01 1,5 Rotating dial with or without dial lock Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. 3 dia. ball tip, already mounted. Cardboard box (111) ø ø10 ø8h6 ø (142.5) ø ø8 h6 10 ø ø4.5 ø5 ø3 6 ø5 ø3 COMPAC dial gauges 512K 0, , , , COMPAC IP 54 dial gauge, protected against the penetration of liquids 532E 0, , COMPAC dial gauges with limited reading range 532S 0,01 ± 0,4 4 1, S 0,01 ± 0,5 4 1, Permissible limits of a metrological characteristic (MPE/MPL) Deviation span Deviation span within the local measuring span 0,10 Total deviation span Repeatability limit Max. hysteresis Measuring force Model IP54 ±0,4 / ±0, µm 15 µm 5 µm 8 µm 9 µm 17 µm 3 µm 3 µm 3 µm 3 µm 1 N 1,5 N 2,2 N F-19

87 D IAL G AUGES E Long Range Precision Dial Gauges 0,01 dial readout / 58 dial diameter EN ISO 463 Factory standard 15.7 D 0,01 1,5 ø58 ø6.4 C A Rotating dial with or without dial lock Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. 3 dia. ball tip, already mounted. F B Cardboard box M 2,5-6H ø4.5 ø3 6 ø A B ,2 211,6 C ,6 D E F Ø 8h6 Ø 8h6 Ø 8h6 COMPAC dial gauges 712 0, , , , , , MERCER dial gauge , , Permissible limits of a metrological characteristic (MPE/MPL) Deviation span Total deviation span µm 25 µm 30 µm 25 µm 30 µm 35 µm Repeatability limit 3 µm 3 µm 3 µm Max. hysteresis 5 µm 5 µm 8 µm Measuring force 2,2 N 2,5 N 3,2 N F-20

88 D IAL G AUGES EN ISO 463 Factory standard Long Range Precision Dial Gauges 0,01 dial readout / 58 dial diameter Both models and are particularly profitable. 0,01 1,5 Rotating dial Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. With or without shockproof mechanism Adjustable tolerance marks. Model No with fine adjust mounted under the protective cap for dial reading. M2,5 mounting thread for the measuring insert. For accuracy, see table on page F-22 See table opposite Mounted insert with a 3,175 dia. steel ball tip. Exception: Each model No has a ruby ball tip. Plastic case or cardboard box Declaration ROCH dial gauges N , , * 1, , , * 1, **** 0, , * 1, , , * 1, *** 0, , * 1, , , , , , , , , ** 0, , , , , ,0 ROCH IP54 dial gauge, protected against the penetration of liquids , ,5 1 * With extra red tinted reverse ing * 2 ** Counterclockwise ing. *** 60,4 dial diameter. **** With mounted central lug back. 7,5 7,5 7,5 7,5 7,5 7,5 10 / 13 ø8 25 ø8 25 7,5 ø 58 1 ø 52 (108 / 105) ø 58 7,5 ø 52 (120) ø 58 16,5 ø ,5 ø 52 (127) 1 33 ø 4 M 2,5-6H ,5 ø 8 ø ø 8 h M 2,5-6H M 2, F-21

89 D IAL G AUGES EN ISO 463 Factory standard 0,01 1,5 Rotating dial 40,8 ø 60,4 21,5 24 ø 4 M 2,5-6H ø ø 8 h6 8 ø 58 7,8 ø 11 7,5 7,5 75,5 ø 59 (232) ø 58 7,8 ø 11 7,5 7,5 105,5 ø 59 (312) Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. With or without shockproof mechanism Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. In order to eliminate any hysteresis when measuring with the plunger moving downward, this feature has to be coupled on the measuring points, directly. See table on the previous page F-21 Mounted insert with a 3,175 dia. steel ball tip. Exception: Each model No has a ruby ball tip Plastic case or cardboard box 35 ø 8 36, ,5 ø 5 55 M 2,5-6H 6 91,5 ø 8 ø 5 M 2,5-6H ,5 Declaration Maximum permissible errors for a metrological characteristic (MPE) 0, Deviation span 15 µm 20 µm 20 µm 25 µm 30 µm Deviation span within the local measuring span of 0,1 5 µm 5 µm 5 µm 5 µm 5 µm Repeatability limit 3 µm 3 µm 3 µm 3 µm 3 µm F-22

90 6 D IAL G AUGES EN ISO 463 Factory standard Precision Dial Gauges 0,01 dial readout / 58 dial diameter Regular and long range models 0,01 1,5 Rotating dial Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. With or without shockproof mechanism Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. See table opposite Mounted insert with a 3,175 dia. steel ball tip Plastic case or cardboard box Declaration N ETALON dial gauges , , , , ,5 2 Plunger retraction device Lift lever Backs with permanent magnet or central lug, see page F-45. Maximum permissible errors for a metrological characteristic (MPE) 8/ ,5 Deviation span Deviation span within the local measuring span of 0,1 µm µm ,5 Repeatability limit µm ,5 22,5 ø ø58 19 / / / 232 ø8 h6 ø8 h ø5 35 / 55 ø F-23

91 D IAL G AUGES Precision Dial Gauges 0,01 dial readout / 82 dial diameter EN ISO 463 Factory standard 0, ,3 19,2 ø10 9 ø Rotating dial with or without dial lock Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. High perfor mance shock proof system in both directions Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. 3 dia. ball tip, already mounted ø6.4 Cardboard box (121) ø82 ø h6 103,6 211,6 ø8 h6 ø ø4.5 M 2,5-6H 6 ø5 ø3 ø5 ø3 TESA dial gauge with dial lock YR 0, ,5 0, TESA dial gauge with a long range YE 0, , Permissible limits of a metrological characteristic (MPE/MPL) Deviation span Deviation span within the local measuring span 0,10 Total deviation span Repeatability limit Max. hysteresis µm 30 µm 8 µm 17 µm 35 µm 3 µm 3 µm 3 µm 8 µm Measuring force 1,4 N 3,2 N F-24

92 D IAL G AUGES Precision Dial Gauges EN ISO 463 Factory standard 0,01 dial readout / 82 dial diameter 0, E D 2,2 Rotating dial with or without dial lock Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. M2,5 thread for the measuring insert 3 dia. ball tip, already mounted. ø82 A Cardboard box ø6.4 C F B ø4.5 M 2,5-6H ø5 ø A B ,2 211,6 C ,6 D E F Ø 8h6 Ø 8h6 Ø 8h6 COMPAC dial gauges with a long range 712G 0, , G 0, , G 0, , GB 0, , Permissible limits of a metrological characteristic (MPE/MPL) Deviation span Total deviation span Repeatability limit Max. hysteresis Measuring force µm 25 µm 30 µm 25 µm 30 µm 35 µm 3 µm 3 µm 3 µm 5 µm 5 µm 8 µm 2,2 N 2,5 N 3,2 N F-25

93 D IAL G AUGES Precision Dial Gauges 0,01 dial readout / 80 dial diameter EN ISO 463 Factory standard 0,01 2,2 7,5 Rotating dial 9,5 7,5 9,5 ø 13 8,5 128,5 Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. With or without shockproof mechanism Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. ø ,5 51 ø (382) See in the table opposite Mounted insert with a 3,175 dia. steel ball tip Cardboard box ø 8 ø (128) ,5 ø 10 ø 6 M 2,5-6H 70,5 106 Declaration M 2,5-6H N ROCH dial gauges , , * 1, , , ,5 * With extra red tinted reverse ing. Maximum permissible errors for a metrological characteristic (MPE) Deviation span Deviation span within the local measuring span of 0,1 Total deviation span µm 35 µm 5 µm 8 µm 19 µm Repeatability limit 3 µm 8 µm Max. hysteresis 3 µm F-26

94 D IAL G AUGES EN ISO 463 Factory standard Precision Dial Gauges 0,002 dial readout / 40 dial diameter 0,002 1,1 Rotating dial Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. 3 dia. ball tip, already mounted ø ø10 Cardboard box ø37 ø8 h6 ø ø8 h6 ø4 6 ø37 ø40 (77.4) ø3 6 ø5 ø3 ø5 COMPAC dial gauge 355 0, ,3 0, COMPAC dial gauge IP54, protected against the penetration of liquids 355E 0, ,3 0, COMPAC dial gauge with limited reading range 365S 0,002 ±0,08 1,5 0, Permissible limits of a metrological characteristic (MPE/MPL) Deviation span Deviation span within the local measuring span 0,10 Total deviation span Repeatability limit Max. hysteresis Measuring force Model IP54 ±0, µm 10 µm 2 µm 6 µm 4 µm 12 µm 1 µm 1,5 µm 1 µm 2 µm 1,4 N 1,4 N 1,7 N F-27

95 D IAL G AUGES Precision Dial Gauges 0,002 dial readout / 58 dial diameter EN ISO 463 Factory standard 0,002 1, ø ø Rotating dial with or without dial lock Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. 3 dia. ball tip, already mounted Cardboard box 43 (105) ø58 ø8 h6 ø (105) ø58 ø53 ø8 h (129) ø58 ø ø8 h6 ø ø4.5 6 ø5 ø3 ø5 ø3 6 ø5 ø3 MERCER dial gauges , ,3 0, , ,3 0, COMPAC dial gauge 555 0, ,3 0, COMPAC dial gauge IP54, protected against the penetration of liquids 555E 0, ,3 0, COMPAC dial gauge with limited reading range 565S 0,002 ±0,08 3,3 0, Permissible limits of a metrological characteristic (MPE/MPL) Deviation span Total deviation span Repeatability limit Max. hysteresis Measuring force Model IP54 ±0, µm 12 µm 4 µm 14 µm 1 µm 2 µm 1 µm 2 µm 1,5 N 1,5 N 1,7 N F-28

96 D IAL G AUGES EN ISO 463 Factory standard Precision Dial Gauges 0,001 dial readout / 40 dial diameter 0,001 1,1 Rotating dial, With or without dial lock. Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. High perfor mance shock proof system in both directions Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. 3 dia. ball tip, already mounted. Cardboard box TESA dial gauges YR 0, ,5 0, YR 0, ,5 0, YE 0, ,5 0, TESA dial gauges IP54, protected against the penetration of liquids YR 0, ,5 0, YR 0, ,5 0, YE 0, ,5 0, COMPAC dial gauge 367 0, ,5 0, COMPAC dial gauge IP54, protected against the penetration of liquids 367E 0, ,5 0, COMPAC dial gauge with limited reading range 367S 0,001 ±0,04 1,5 0, ø10 ø37 ø40 (77.4) Permissible limits of a metrological characteristic (MPE/MPL) ø3 ø8 h6 ø4 ø ø10 Deviation span Deviation span within the local measuring span 0,10 Total deviation span ±0, µm 4 µm 2 µm 4 µm 4 µm 5 µm ø37 ø8 h6 ø40 Repeatability limit Max. hysteresis Measuring force Models IP54 1 µm 1 µm 1 µm 1 µm 1,4 N 1,7 N 2 N 6 ø3 F-29 ø5

97 D IAL G AUGES Precision Dial Gauges 0,001 dial reading / 40 dial diameter EN ISO 463 Factory standard 7 7 0, ø 40 11,5 6,5 ø8 M 2,5-6H ø 8 ø ,5 ø 37 13,5 (80) 21 1 ø 40 11,5 ø9 6,5 7 M 2,5-6H ø 8 ø ,5 ø 37 10,5 (77) 1,1 ( ) 2,2 ( ) Rotating dial Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. With shockproof mechanism Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. N ROCH dial gauges , ,1 0, /0 100* 1, , ,1 0, * 1,2 * With extra red tinted reverse ing. Maximum permissible errors for a metrological characteristic (MPE) See table opposite Mounted insert with a 3,175 dia. steel ball tip Suited plastic case Declaration 0,001 1 Deviation span 5 µm Deviation span within the local measuring span of 0,01 3 µm Total deviation span 7 µm Repeatability limit 3 µm Max. hysteresis max. 3 µm F-30

98 D IAL G AUGES EN ISO 463 Factory standard Precision Dial Gauges 0,001 dial readout / 58 dial diameter 0,001 1,5 Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. High perfor mance shockproof system in both directions Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. 3 dia. ball tip, already mounted Cardboard box TESA dial gauges YE 0, ,5 0, YR 0, ,3 0, YR 0, ,3 0, YE 0, ,3 0, COMPAC dial gauges IP54, protected against the penetration of liquids YE 0, ,5 0, YR 0, ,3 0, Permissible limits of a metrological characteristic (MPE/MPL) 1 5 Deviation span Deviation span within the local measuring span 0,10 Total deviation span Repeatability limit Max. hysteresis Measuring force Models IP54 4 µm 12 µm 4 µm 5 µm 14 µm 1 µm 2 µm 1 µm 2 µm 1,7 N 1,5 N 1,7 N ø ø8 h6 ø (105) ø58 ø53 62 (129) ø58 ø ø8 h ø5 ø3 6 ø5 ø3 A-31 F-31

99 D IAL G AUGES Precision Dial Gauges 0,001 dial readout / 58 dial diameter EN ISO 463 Factory standard 0,001 1,5 Rotating dial ø ø10 9 ø53 43 (129) ø ø Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. 3 dia. ball tip, already mounted. (105) 50 Cardboard box 6 ø4.5 ø5 ø3 ø8 h ø8 h6 ø5 ø COMPAC dial gauges 556 0, ,3 0, , ,3 0, COMPAC dial gauges IP54, protected against the penetration of liquids 556E 0, ,3 0, E 0, ,3 0, Permissible limits of a metrological characteristic (MPE/MPL) Deviation span Total deviation span Repeatability limit Max. hysteresis Measuring force Models IP µm 12 µm 5 µm 14 µm 1 µm 2 µm 1 µm 2 µm 1,5 N 1,5 N 1,7 N 1,7 N F-32

100 D IAL G AUGES EN ISO 463 Factory standard Precision Dial Gauges 0,001 dial readout / 58 dial diameter 0,001 0,8 (No , and ) 1,5 (No ) Rotating dial Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. With or without shockproof mechanism Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. For accuracy, see the table on page F-30 See table opposite Mounted insert with a 3,175 dia. steel ball tip Suited plastic case Declaration ROCH dial gauges N , ,1 0, /0 100* 1, , ,1 0, /0 100* 1, , ,1 0, * 1,5 ROCH dial gauge IP54, protected against the penetration of liquids , ,1 0, /0 100* 2,0 * With extra red tinted reverse ing. 7,5 7,5 7,8 7,5 7,5 7,8 7,5 7,5 ø 8 13 / 17 ø 9 17 ø8 ø 58 ø / 112 ø 58 ø ,5 112 ø 58 ø 52 (119) ø ,5 ø ø 4 33 ø 4 M 2,5-6H 15 M 2,5-6H , ø 8 h6 M 2, A-33 F-33

101 D IAL G AUGES Precision Dial Gauges 0,001 dial readout / 82 dial diameter EN ISO 463 Factory standard 0,001 2,3 ø82 19,2 ø10 9 ø53 43 Rotating dial. With or without dial lock. Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. High perfor mance shockproof system in both directions Adjustable tole - rance marks. M2,5 mounting thread for the measuring insert. 3 dia. ball tip, already mounted (145) Cardboard box ø8 h ø4.5 6 ø5 ø3 TESA dial gauges YR 0, ,3 0, YR 0, ,3 0, COMPAC dial gauge 556G 0, ,3 0, Permissible limits of a metrological characteristic (MPE/MPL) Deviation span Deviation span within the local measuring span 0,10 Total deviation span Repeatability limit Max. hysteresis µm 12 µm 4 µm 5 µm 14 µm 1 µm 2 µm 1 µm 2 µm Measuring force 1,7 N 1,5 N F-34

102 D IAL G AUGES Factory standard Precision Dial Gauges in dial readout / 40 or 58 dial diameter in 2,2 Rotating dial with dial lock Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Adjustable tole - rance marks. M2,5 mounting thread for the measuring insert. Mounted insert with a 3 dia. steel ball tip Cardboard box MERCER dial gauges in in in in Permissible limits of a metrological characteristic (MPE/MPL) Deviation span Total deviation span Repeatability limit Max. hysteresis Measuring force 0.2 in 0.4 in 1 in in in in in in in in in in 1,4 N 1,4 N 2,2 N ø10 ø ø37 ø40 (77.4) (105) ø58 ø ø8 h6 ø8 h6 62 ø4 ø4.5 6 ø3 ø5 6 ø5 ø3 A-35 F-35

103 D IAL G AUGES Precision Dial Gauges in dial readout / 40 or 58 dial diameter Factory standard in 3,1 Rotating dial with or without dial lock Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. Mounted insert with a 3 dia. steel ball tip Cardboard box MERCER dial gauges in in in in COMPAC dial gauge 354A COMPAC dial gauge IP54, protected against the penetration of liquids 354AE Permissible limits of a metrological characteristic (MPE/MPL) 0.2 in 0.4 in 1 in Deviation span Total deviation span in in in in in in Repeatability limit in in in Max. hysteresis in in in Measuring force Model IP54 1,4 N 1,4 N 2,2 N 1,7 N ø10 ø ø37 ø40 ø8h6 ø ø8 h6 ø4.5 F-36 6 M 2,5-6H 6 ø3 ø5 ø5 ø3

104 D IAL G AUGES Factory standard Precision Dial Gauges in dial readout / 40 or 58 dial diameter in 1,1 Rotating dial with or without dial lock Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. Mounted insert with a 3 dia. steel ball tip Cardboard box in in in in COMPAC dial gauge IP54, protected against the penetration of liquids 355AE MERCER dial gauges Maximum permissible errors for a metrological characteristic (MPE) Deviation span Total deviation span Repeatability limit Max. hysteresis 0.12 in 0.2 in Measuring force 2 N 2.2 N (129) ø58 ø ø8 h ø5 ø3 A-37 F-37

105 D IAL G AUGES Small Dial Gauges MERCER Series 70, 1 1 /8 in or 29 dial diameter 15,91 9,39 11,15 7,95 5,61 3,18 4,19 ø 7,95 ø 3,9 Factory standard or EN ISO 463 for metric models See table opposite 2,25 or 0,9 18,7 Rotating dial Models to or in ø 8,00 ø 7,95 10 BA 27 ø 28,6 11,3 9,52 ø 3 ø 29, ,6 Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Without shockproof mechanism Back with central lug. Measuring insert with a 10BA coupling thread. in in in in N Standard models , ,5 See in the table opposite Mounted insert with a 3 dia. steel ball tip Cardboard box Models to 0,01 or 0,002 N Standard models ,01 1 1, , ,002 0,2 1,2 0, ,5 Permissible limits of a metrological characteristic (MPE/MPL) in in 0,01 0,002 Deviation span Total deviation span in in 10 µm 6 µm in in 13 µm 9 µm Repeatability limit in in 3 µm 2 µm Max. hysteresis in in 3 µm 3 µm Accessories for MERCER dial gauges, series 70 10BA coupling thread ø 3 3,6 3,2 10 BA 1,59 3,18 ø 4,76 10 BA ø 1,6 Standard insert with spherical measuring faces. Measuring insert with a flat measuring face. F Steel 1, Carbide 1, Steel 4,76

106 D IAL G AUGES EN ISO 463. Factory standard. Dial Gauges with Back Mounted Plunger 0,01 or 0,002 dial readout / 40 dial diameter Rotating dial Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Shockproof system protecting the movement Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. Fastening sleeve with a 8h6 or 25h6 stem diameter. Mounted insert with a 3 ball tip dia. Ø 40 Cardboard box Serial Ø 8 h6 Ø 4 Ø 3 7 Ø 25 h6 Ø 37 µm µm µm N COMPAC dial gauges CP 352 0,01 3 3, ,9 CP 353 0,01 3 3,2 0, ,9 CP 355 0, ,2 0, ,5 0,9 COMPAC dial gauges with a limited reading range CP 352S 0,01 ± 0,4 3,2 (1) ,9 CP 355S 0,002 ± 0,08 3,2 (0,2) ,5 0,9 S: Models with a restricted reading range. Since the pointer travels less than one revolution, all reading errors due to the revolution counter are eliminated. F-39

107 D IAL G AUGES Dial Gauges with Back Mounted Plunger MERCER Serie 90, 38 dial diameter Factory standard or EN ISO 463 for metric models 103,5 3,96 ø 6,35 2 BA ø 29,1 M 2,5-6H ø 5 4,8 ø 7,98 ø 7,96 14, ,5 17,2 ø 38, in and 0,01 2,4 or 1,2 Rotating dial Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Without shockproof mechanism Measuring insert with a M2,5 thread. Also with a 6,35 dia. holding rod that can be unscrewed. Models to 0,01 N See table opposite Mounted insert with a 3 dia. steel ball tip ,01 1 3, , ,01 1 3, ,5 Models to in Cardboard box in in in in N , ,5 Maximum permissible errors for a metrological characteristic (MPE) 0, in Deviation span Total deviation span 25 µm in 40 µm in Repeatability limit 12 µm in Max. hysteresis 12 µm in 18 14,75 22,5 Accessories for MERCER dial gauges, series 90 48,5 ø 8 Swivelling arm 57,1 Amplification :1 ø 3,18 48,5 48,5 ø 4,6 18,45 F-40 A-40

108 D IAL G AUGES EN ISO 463 Factory standard Dial Gauges with Back Mounted Plunger 0,01 dial readout / 40 or 58 dial diameter 0,01 2,2 (Ø 40) 1,5 (Ø 58) Rotating dial Full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Without shockproof mechanism Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. See table opposite Mounted insert with a 3,175 dia. steel ball tip Cardboard box N ROCH dial gauges ,01 3 3,5 0, * 1, ,01 3 3, * 1,5 * With extra red tinted reverse ing. ø 40 ø 58 Declaration ø ,5 ø ,5 ø ,5 ø 28 ø ø ,5 ø ø 4 8 M 2,5-6H 6 M 2,5-6H 6 Maximum permissible errors for a metrological characteristic (MPE) Deviation span Deviation span with the local measuring span of 0,1 Total deviation span 3 12 µm 5 µm 15 µm Repeatability limit 5 µm Max. hysteresis 15 µm A-41 F-41

109 A CCESSORIES FOR D IAL G AUGES AND THE L IKE Measuring Inserts for Dial Gauges, Axial Probes and other Handtools Executions with a M2,5 coupling thread ø ,1 M2,5 R1,5 ø3 ø5 5,4 8 M2,5 ø3 Standard spherical measuring inserts. Short spherical measuring insert. Long spherical measuring inserts. L Steel Carbide Sapphire 6 L Carbide 4 L Steel Carbide Sapphire 8 16/26/36/46 L M2,5 18 D R1,5 ø5 r 0,5 ø5 ø1,5 9 Spherical measuring inserts, R = 0,5. Spherical measuring inserts. Spherical measuring insert with 4 inter changeable pins, R = 1,5. L Steel Steel Steel Steel Steel Steel 40 6 R Carbide Carbide Carbide Carbide Carbide Carbide Carbide Carbide Carbide Steel Steel Steel 12 L Steel 16, 26, 36, 46 ø5 6,5 0,3 0,5 1,6 6 Spherical measuring inserts. 6 Measuring insert with offset (A) contact point and lock nut for radial alignment. R Steel Carbide 5 ø10 r16 Spherical measuring inserts A Steel 6,5 R Steel Carbide 16 F-42

110 A CCESSORIES FOR D IAL G AUGES AND THE L IKE 15 7,5 17, ø2 0,003 1,5 20 ø7 3,0 2,0 8 0,4 Measuring insert with offset (A) contact point and lock nut for radial alignment. 1.6 Measuring insert with needle contact point. Measuring inserts with ball-bearing rollers. Lock nut for radial alignment Steel A Shape Steel Steel Steel cylindrical ball-shaped 8 ø5 ø ø5 L 0,2 ø2 3,3 ø2 2,5 6 Inserts with a blade-shaped measuring face. Lock nut for radial alignment. Inserts with a blade-shaped steel face. Lock nut for radial alignment. Insert with a cylindrical measuring face. Lock nut for radial alignment. B L B Carbide Steel 0, Carbide 0, , , , ,2 ød 6 ø5 8 ø4 16 ø3,4 5 6,5 1 3,3 0,5 5 Insert with a narrow, off-centre measuring face. Lock nut for radial alignment. 16 ø4 2,5 0,5 2,3 ø7,5 Insert with a narrow, parallel measuring face, adjustable. Lock nut for radial alignment. Inserts with a flat measuring face Steel 2, Carbide 2, Steel 3, Carbide 3,4 16 2,3 B B ø2, Carbide 0, Carbide 0,5 ø4 ø7,5 Insert with a flat, parallel measuring face., adjustable. Lock nut for radial alignment Carbide 2,5 F-43

111 A CCESSORIES FOR D IAL G AUGES AND THE L IKE 20 3,6 5 L1 ø5 ø5 ø10 ø2 L ø5 ø ø20 Steel inserts with a flat measuring face. Inserts with a flat measur ing face as well as interchangeable pin. Inserts with a flat measuring face. L L , , , , Steel 1, Carbide 1,5 ø Steel Carbide Steel Carbide Steel 20 L L ø5 Extensions for measuring inserts. M2,5 M2,6 10 M2,5 Connectors for measuring inserts. Outside Inside M2,5 M M2,5 M2, M2,5 M M2,6 M2, M3 M2,5 L ø4 Extensions for measuring inserts. L Executions with a M2 Coupling Thread L 2,5 6 ø1,5 5 M2 ø4 M2 s = 3 R5 3 ø3,5 s = 3 2 ø4 R1 s = 3 M2 Spherical measuring inserts, R = 5. M2 thread. Measuring insert with cylindrical measuring face. Lock nut for radial alignment. M2 thread. 3 ø4 R5 s = 3 M2 L Carbide Carbide Carbide Spherical measuring inserts. M2 thread. Extensions for measuring inserts, M2. L Carbide R Carbide R 5 ø3,5 M2 s = 3 M2 L F-44

112 A CCESSORIES FOR D IAL G AUGES AND THE L IKE Devices for Plunger Retraction Top mounted retraction devices Retraction device Ø Retraction device Ø 58 Each consisting of: Lift lever Head screw Bottom mounted retraction device Retraction device Consisting of: Lift lever Washer Bottom mounted lift lever Angle Probe angle probe used for the transmission of the plunger movement up to 10. Suited for dial gauges with a 0,01 scale division. Furnished with: Measuring insert with a 5 diameter flat face Backs for ROCH or ETALON Dial Gauges Bezel Back Magnetic diameter diameter face L 5 13 ø 5 Central lug backs , 60, Magnetic back with permanent magnets , 60, ø A-45 F-45 L

113 A A CCESSORIES FOR D IAL G AUGES AND THE L IKE 19 Backs for dial gauges TESA YR, TESA YE, MERCER, COMPAC, 40, 58 or 82 dial diameter DIGICO , 58 dial diameter Executions for dial gauges with a 40 dial diameter Dull-chrome plated, except for models No , , and Holding force = 150 N ø6.4 B A B C D E Back with central lug Back with offset lug Back with a 8 dia. fixing shank Back with M6 inner thread Back with permanent magnet ø6.4 D 21.7 E M6 C 25 ø18 ø ø8 Executions for dial gauges with a 58 or 82 dial diameter 16 A A B C D E F G Flat back Flat back with central lug Flat back with offset lug Back with a 8 dia. fixing shank Back with a M6 inner thread Back with 4 clamping bores as per CNOMO French standard Back with permanent magnet 19 B C D ø6.4 ø M3 (4x) ø24 ø E F G ø18 M F-46

114 Dial Test Indicators (Lever-type) G-1

115 D IAL T EST I NDICATORS (LEVER-TYPE) TESA IP65 Electronic Dial Test Indicators Provide the advantages of mechanics combined with electronics All in one. LCD, 5 digits + sign 35 Inductive measuring system, patented. Analogue and numerical indication. Numerical interval to 0,01/0,001. Selectable scale division: 10, 20, 50 µm/1, 2, 5 µm. Water and coolant resistant (IP65). Metric/inch conversion. RS 232 data output combined with external power supply. Displayed measuring modes (NOR/MIN/MAX/MAX-MIN). Automatic shut-down. Compatible with all TESATAST accessories. Digit height 6 Resolution to 0,01/0,001;.0005/ in Zero-setting Max. perm. errors: fe = 10 µm fges = 13 µm Pre-span = 0,05 Repeatability: fw = 1 µm Hysteresis : fu = 3 µm L = 12,5 ; max. 0,05 m/s L = 36,5 ; max. 0,15 m/s Number of measurements per second: 9 Operating temperature range: +5 C to + 40 C ø 44 3 V lithium battery, type CR 2032 > 4000 hours RS g (L = 12,5 ) 75 g (L = 36,5 ) EN ,65 8,54 6, ø 1,5 Degree of protection IP65 (IEC 529) Supplied in a plastic case along with: 1 Insert with a 2 dia. (No ) 1 Wrench (No ) 1 Mounting rod with a 8 dia. (No ) in Insert N (± 15%) ,01/0, / ,8 12,5 0, ,01/0, / ,5 36,5 0,07 Declaration of conformity Accessories V lithium battery, 190 mah, type CR RS 232 connecting cable with external power supply Compatible with all TESATAST measuring inserts and accessories G-2 F-2

116 D IAL T EST I NDICATORS (LEVER-TYPE) TESATAST Standard Models ,01 0, ,4 0 12, ,01 0, ,4 0 12, ,01 0, , , ,01 0, , , ,002 0, , ,002 0, ,53 S ,001 0, ,53 in / / / / / / / /2 SWISSTAST Standard Models Ø Insert DIN 2270 NF E Rotating dial Very low measuring force see table on page G-3 Movement with patented shock proof system Lever system with friction drive to prevent overload Accuracy: see table on page G-3 Supplied in a plastic case along with: 1 Insert with a 2 dia. 1 Wrench (No ) 1 Mounting rod with a 8 dia. (No ) Declaration Ø Insert ,01 0, ,4 0 12, ,002 0, ,53 * Same technical data as standard models, but equipped with a 2 dia. ruby ball tip No TESATAST Perpendicular Models Ø Insert ,01 0, ,4 0 12, ,01 0, , , ,002 0, ,53 in / /2 G-4

117 D IAL T EST I NDICATORS (LEVER-TYPE) TESATAST Lateral Models Ø Insert ,01 0, ,4 0 12, , ,0 0 36, ,002 0, ,53 in /2 A Measuring direction B Measuring direction α Shorten lever length Note on the use of TESATAST dial test indicators With the measuring insert lying parallel to the workpiece surface (Fig. A), these indicators give true reading due to the amplification factor to 1:1. In another measuring position (angle α in Fig. B), the effective lever length changes so that the read value needs to be corrected. With respect to this, also refer to the instruction manual. Tungsten carbide or ruby ball tip M1.4 coupling thread Measuring inserts Carbide ball tips Ruby ball tips , , , , , , Wrench for measuring inserts Note The original measuring insert mounted on every TESATAST as well as any other insert with same nominal length but having a different ball tip diameter are fully interchangeable. Indicator Sets with Small Support DIN 2270 NF E Technical data are listed under each single product Plastic case Declaration consisting of: Indicator sets with small support Dial test indicator (lever-type) Dial test indicator (lever-type) Measuring insert Mounting rod Mounting rod Wrench for measuring inserts INTERAPID small support UJ 15 A-5G-5

118 D IAL T EST I NDICATORS (LEVER-TYPE) TESATAST Accessories Mounting rod with dovetail clamp Ø Mounting rod with dovetail clamp Ø Mounting rod with cylindrical body and clamping tenon Ø 8 x 80 Ø 5, Mounting rod with right-angle body and clamping tenon 13 x 6 x 50 Ø 5, Short swivel holder with mounting rod Ø 8 x 25 and dovetail clamp Long swivel holder with mounting rod Ø 8 x 90 and dovetail clamp Angle holder with mounting rod Clamping bore Ø 8 x 25 Ø Centring shoulder for TESATAST Perpendicular with cylindrical rod Clamping point for mounting rod and Ø 8 x 25 Ø 4 dovetail clamp Dovetail clamp with tightening point Ø 5,6 Ø 9, Long swivel holder with cylindrical rod and Ø 8 x 125 dovetail clamp as well as fine setting device Mounting rod with dovetail clamp Ø 6 Consisting of the following components: Sets of Accessories * N o ** N o *** N o 3 * Supplied with one single insert No , and , one wrench No as well as a suited case No ** Supplied in a suited case No *** Supplied in a suited case No G-6

119 D IAL T EST I NDICATORS (LEVER-TYPE) INTERAPID 312 Regular Models ,01 1,6 37, , ,01 1, , ,002 0,4 37, , ,002 0, ,2 in Ø Insert Rotating dial Very low measuring force (see table on page G-7) Lever system with friction drive to prevent overload Accuracy: see table on page G-7 Supplied in a plastic case along with: 1 steel insert with a 2 diameter, hardened. 1 key No Declaration INTERAPID 312 Perpendicular Models Ø Insert ,01 1,6 37, , ,01 1, ,5 in , , , , G-8

120 D IAL T EST I NDICATORS (LEVER-TYPE) product Technical data as listed under: each single Each full set consists of: Dial Test Indicator Sets, Complete with Accessories Plastic case Declaration INTERAPID 312 as listed in the tables below Rectangular attachment Reducing sleeve, metric or Reducing sleeve, inch Swivel holder, metric or Swivel holder, inch Storage case for measuring inserts Wrench for measuring inserts INTERAPID 312 Regular Models in INTERAPID 312 Perpendicular Models in A-9G-9

121 D IAL T EST I NDICATORS (LEVER-TYPE) Measuring Inserts for INTERAPID 312 Length L of measuring inserts * The length of the used insert chan ges the amplification factor of the lever system. Therefore, each read value must be doubled. ** Except for both models No and *** Model No only. **** Model No only. Note The original measuring insert mounted on every INTERAPID 312 as well as any other insert with same nominal length but having different ball tip diameters are fully interchangeable. L Steel ball tips , , ,01 1,5 16, ,01 0,8 16, , ,6* ,01 0,8 36,6* , , ,002 1,5 15, ,002 0,8 15, , * ,002 0,8 34* in all** all** all** all** * all** * /in Carbide ball tips *** **** Wrench for measuring inserts Storage case for measuring inserts L Ball tips in hardened steel or tungsten carbide M1,7 coupling thread Accessories for INTERAPID Rectangular clamping attachment, complete Rectangular attachment with clamp 13 x 6 x 50 Ø 5, Double attachment with clamping point Ø 4 and dovetail Swivel holder with clamping points Ø 8 x 133 Ø 4 and dovetail Reducing sleeve Ø 8 / Ø 4 G-10

122 D IAL T EST I NDICATORS (LEVER-TYPE) DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface plate Detect form and position errors Measure axial and radial runouts, especially. Friction lever system to preventing overload Contact points with tungsten carbide ball tips Delivery in a suited plastic case including: 1 contact point, 2 dia. 1 rigid stem with 8 dia., L = 15, No rigid stem with 4 dia., L = 15, No (except for series 220). A B Measuring direction Measuring direction α Shorter lever length Technical features Long range up to 3. Bidirectional measuring, without reversing lever. Continuous two-way clockwise rotation of the pointer. Swivelling probe through 180. Main pivot on oversized, self-aligning angular bearings. Dovetail mounting machined in the indicator body. Dull-chrome plated bezel and housing. Rotating dial. Insensitive to magnetic fields generated in coon precision mechanics. Serial Note for use of COMPAC dial test indicators With the measuring insert lying parallel to the workpiece surface (Fig. A), these dial test indicators give true reading due to the amplification factor to 1:1. In any other measuring position (angle α in Fig. B), the effective lever length changes so that the read value need be corrected. With respect to this, also read in the instruction manual. COMPAC Series 210 Type Standard L1 L2* ø27 ø ø 0.79 *L2 see table page G-15 Metric Reading Whole Travel/ Contact travel revolution point Ø L1 µm µm µm N 213 0,01 1,5 0, ,35 213G 0,01 1,5 0, ,35 212L 0, ,20 212GL 0, , ,002 0,6 0, ,5 2,5 0,30 215G 0,002 0,6 0, ,5 2,5 0,30 215GL 0,002 1,2 0, ,5 5 0,20 216G 0,001 0,6 0, ,5 2,5 0,30 A-11 G-11

123 D IAL T EST I NDICATORS (LEVER-TYPE) Inch Reading Whole Travel/ Contact travel revolution point in in in Ø in L 1 in in in in N 214A ,35 214GA ,35 213LA ,20 213GLA ,20 215A ,30 215GA ,30 COMPAC Series 220 Type Perpendicular Ø 27 Ø L L2* ø *L2 see table page G-15 Metric Reading Whole Travel/ Contact travel revolution point Ø L1 µm µm µm N 223 0,01 1,5 0, ,35 223G 0,01 1,5 0, ,35 222L 0, ,20 222GL 0, , ,002 0,6 0, ,5 2,5 0,30 225G 0,002 0,6 0, ,5 2,5 0,30 Inch Reading Wole Travel/ Contact travel revolution point in in in Ø in L1 in in in in N 224A ,35 224GA ,35 223GLA ,20 225GA ,30 G-12

124 D IAL T EST I NDICATORS (LEVER-TYPE) COMPAC Series 230 Type Parallel DIN 2270 and factory standard Rotating dial Friction lever system to preventing overload Contact points with tungsten carbide ball tips Delivery in a suited plastic case including: 1 contact point, 2 dia. 1 rigid stem with 8 dia., L = 15, No rigid stem with 4 dia., L = 15, No (except for series 220) L1 L2* Ø Ø 27 Ø 40 Serial *L2 see table page G-15 Metric Reading Whole Travel/ Contact travel revolution point Ø L1 µm µm µm N 233 0,01 1,5 0, ,35 233G 0,01 1,5 0, ,35 232L 0, ,20 232GL 0, ,20 235G 0,002 0,6 0, ,5 2,5 0,30 A-13 G-13

125 D IAL T EST I NDICATORS ( LEVER-TYPE) COMPAC Series 240 Reduced Range One-revolution models DIN 2270 and factory standard Rotating dial ø27 ø40 Friction lever system to preventing overload Contact points with tungsten carbide ball tips L1 L2* 1.6 *L2 see table page G-15 Ø 0.79 Delivery in a suited plastic case including: 1 contact point with a 2 diameter 1 rigid stem with 8 dia., L = 15, No rigid stem with 4 dia., L = 15, No Serial Metric Reading Whole Contact travel point Ø L1 µm µm µm N 242 0,01 0, ,25 242G 0,01 0, ,25 243L 0,01 0, ,5 0,10 243GL 0,01 0, ,5 0, ,002 0, ,5 2 0,25 245G 0,002 0, ,5 2 0,25 Inch Reading Whole Contact travel point in in Ø in L1 in in in in N 244A ,25 245A ,25 245GA ,25 G-14

126 1 D IAL T EST I NDICATORS (LEVER-TYPE) Accessories for COMPAC Dial Test Indicators Fixing shank with dovetail clamp Ø Fixing shank with dovetail clamp Ø Cylindrical fixing shank with tightening tenon Ø 8 x 80 Ø 5, Rectangular fixing shank with tightening tenon 13 x Ø 5, Short swivel holder with cylindrical shank Ø 8 x and dovetail grip Long swivel holder with cylindrical shank Ø 8 x 90 and dovetail grip Angle holder with cylindrical shank Clamping bore Ø 8 x 25 Ø Centring holder for perpendicular model with cylindrical shank Clamping point for fixing shank Ø 8 x 25 Ø 4 and dovetail clamp Double fixing clamp with clamping point Ø 5,6 and dovetail clamp Long swivel holder, cylindrical shank with Ø 8 x 125 dovetail grip. Also with fine setting Fixing shank with dovetail clamp Ø ø 16 ø D ø 16 ø D 26,8 23,8 Stem Clamping length SPT Rotating holder 8 25 SPTA Rotating holder 1 /4 in 1 in SPTA-3/16 Rotating holder 3 /16 in 1 in SPTA-3/8 Rotating holder 3 /8 in 1 in SPTA-5/16 Rotating holder 5 /16 in 1 in D Mounting rods with dovetail grip Fixing shank swivelling through ± 30 Ø 1 /4 in Rigid fixing shank Ø 1 /4 in Fixing shank swivelling through ± 30 Ø Rigid fixing shank Ø Fixing shank swivelling through ± 30 Ø Rigid fixing shank Ø 4 G-16

127 C OMPARATOR G AUGES ETALON Caliper Gauges for Internal or External Dimensions Reading to 0,01 or 0,02 Long-lasting precision movement No gear transmission Tungsten carbide measuring faces for high wear-resistance Concentric pointer for sure reading of the millimetres Lifting lever for the gauge legs. External Short Leg Caliper Gauges A B 0,01 or 0,02 Tungsten carbide measuring faces Models with reading to 0,01 = 30 µm 0,02 = 60 µm Models with reading to 0,01 = 20 µm 0,02 = 40 µm Suited plastic case A B L ,01 9,3 3,0 39,7 L External Long Leg Caliper Gauges A B L ,02 9,3 3,0 87 Internal Short Leg Caliper Gauges A B L ,01 1,1 1,5 39, ,01 3,3 1,5 39, ,01 4,0 1,8 39,7 Internal Long Leg Caliper Gauges A B L ,02 3,3 1, ,02 7,0 2, ,02 9,75 2, ,02 9,75 2,8 87 H-16

128 T HICKNESS G AUGES 15 throat depth 37 dial diameter 10 Non-interchange - able inserts 40 µm (dial gauge) Suited plastic case Declaration INTERAPID Thickness Gauges These gauges with a frame are specially made to measure the thickness of plastic parts as well as hard and soft materials such as glass, wood, paper, rubber, metal sheets etc. All models have a dial that can be rotated for zero setting. Small-size models, reading to 0,1 m With open inserts when not in use ,1 flat Ø 6, ,1 flat Ø dial diameter Small-size models, reading to 0,01 1 Non-interchangeable, retractable measuring inserts. 0,7 N 15 µm (dial gauge) Suited plastic case ,01 flat Ø 6, ,01 flat Ø 10 Declaration 50 throat depth Models with roller-type measuring inserts, reading to 0,01 57 dial diameter 1 Non-interchangeable, retractable measuring inserts. 1,2 N 15 µm (dial gauge) Cardboard box Ø Length Roller-type inserts ,01 8,4 8, ,01 8,4 8,7 Side discs Declaration H-17

129 T HICKNESS G AUGES Regular Models, reading to 0,01 57 dial diameter 1 Interchangeable, retractable measuring inserts 1 N 40 µm (dial gauge) Cardboard box Declaration ,01 flat Ø ,01 flat Ø ,01 flat Ø 10 Measuring insert available upon request. H-18

130 T HICKNESS G AUGES Models with deep throat, reading to 0,01 57 dial diameter 1 Interchangeable, retractable measuring inserts 2 N 15 µm (dial gauge) Cardboard box Declaration Paired inserts , flat Ø , flat Ø Models with deeper throat, reading to 0,1 57 dial diameter 10 With foot for stationary use Interchangeable, retractable measuring inserts 2 N 40 µm (dial gauge) Cardboard box 400 Declaration Paired inserts ,1 flat Ø ,1 flat Ø ,1 flat Ø ,1 spherical Ø H-19

131 T HICKNESS G AUGES Model for laminated plies, reading to 0, throat depth. Highly stable frame with heat insulating handle. 57 dial diameter 0,2 Non-interchangeable, retractable measuring inserts. 2 N 5 µm (dial gauge) ,001 flat Ø 6,35 Cardboard box Declaration Models with reading to 0,1 With open inserts when not in use 57 dial diameter 10 Interchangeable measuring inserts 40 µm (dial gauge) Cardboard box Declaration Paired inserts ,1 50 flat Ø ,1 50 flat Ø ,1 50 flat Ø ,1 50 convex Ø ,1 50 spherical Ø H-20

132 D EPTH G AUGES Dial Depth Gauges, Type PF1 Hardened steel Finely lapped measuring faces. Mount with clamp for a dial gauge or a probe. Provided without dial gauge ø28 ø8 Cardboard box Declaration 80 ø6.5 Mount Flat base 80 x 16 Ø 8 ø28 ø ø Width Mount V-base Ø 8 H-21

133 Measuring Stands and Auxiliary Fixtures I-1

134 M EASURING S UPPORTS INTERAPID Small Magnetic Supports Ideal for dial test indicators (lever-type) or dial gauges having a 40 dial diameter Versatile due to 2 rigid joints and fine adjust option. UJ 15 Model UJ 15G Model Rounded base with permanent magnet Holding force on a flat surface: 220 N for UJ N for UJ 15G 0,47 kg for UJ 15 0,93 kg for UJ 15G Supplied without indicator Suited carrying case Declaration Steel Base Plate 50 x 80 x 20 0,60 kg 80 ø ø8 ø ø ø52 ø Accessory INTERAPID small magnetic support UJ15 with a 8 diameter clamping bore and dovetail clamp INTERAPID small magnetic support UJ15G with both a 8 and 4 diameter clamping bore and dovetail clamp Steel base plate for use of UJ 15 as mobile support I-2

135 M EASURING S UPPORTS Base has a vee recess and one magnetic flat face with disengageable magnet. Articulations made from duralumin. Holding force on a flat surface 170 N Dovetail clamp with a 8 diameter clamping bore 0,4 kg Model with Articulated Arm INTERAPID small magnetic support with articulated arm Full length 205 Consisting of: 1 Articulated arm Length Dovetail clamp with fine adjustment 1 Magnetic base L x W x H 30 x 30 x 30 Supplied without indicator Suited carrying case Declaration M6 M6 ø8 Magnetic Supports with Flat or V-Base Model with a flat base has 2 rounded permanent magnets 72 x 38 x 11 for model with a flat base or 72 x 38 x 26 for model with a V-base Holding force: 180 N for the flat base or 260 N for the V-base Clamp with a 8 diameter clamping bore Supplied without indicator Suited carrying case Declaration INTERAPID magnetic support with a flat base INTERAPID magnetic support with a V-base I-3 I-3

136 M EASURING S UPPORTS INTERAPID Magnetic Supports Standard Model and Models with Powerful Holding Force N Fine V-Base adjust for Standard model Powerful holding force Powerful holding force Disengageable magnet. Clamp with a 8 dia. clamping bore. Supplied without indicator Suited carrying case Declaration ø ø16 ø13.8 ø ø13.8 ø21.8 I x x x 68

137 M EASURING S UPPORTS Magnetic base has 2 flat faces plus 1 prismatic one. Articulations made from duralumin. Disengageable permanent magnet. Dovetail clamp with a 8 diameter clamping bore. Magnetic base (L x W x H) 60 x 50 x 55 Models with Articulated Arm Attach simply and securely using a single lobe knob Solid arm with highly rigid articulations. 49 ø8 M6 1,45 kg or 1,85 kg Supplied without indicator H L Suited carrying case Declaration M8 H L N Fine V-Base adjust for Magnetic support Magnetic support Consisting of: Articulated arm Articulated arm Clamp Magnetic base Magnetic base has 2 flat faces plus 1 prismatic one. Disengageable permanent magnet. Full length 350. Dovetail clamp with a 8 diameter clamping bore. Holding force on a flat surface 1000 N Supplied without indicator Model with Flexible Arm For hard-to-reach locations Lever controlled arm that holds securely on any surface. ø21.8 Suited carrying case Declaration x INTERAPID magnetic support with flexible arm I-5 I-5

138 M EASURING S UPPORTS INTERAPID Measuring Support with Suction Base Holds firmly on any plain, flat surface Clamps easily and reliably over the lobe knob Provides high rigidity Free from magnetic fields. 49 ø8 M6 Round suction base in duralumin.(88 in diam - eter and 28 in height) with a flat face. Articulations in duralumin. Disengageable suction effect using the lever. Dovetail clamp with a 8 diameter clamping bore. 1,1 kg Supplied without indicator Suited carrying case M8 Declaration H L N Fine Support with suction base adjust consisting of: Articulated arm Clamp Round suction base INTERAPID Measuring Supports 177 ø8 ø8 119 Base with resting front face. Clamp for a 8 diameter mounting rod or a dial gauge with lug. Model No with added dovetail clamp Cast iron base 98 x ,3 kg or 4,35 kg Supplied without indicator 314 ø17,8 ø17,8 253 Suited carrying case Declaration 150 x INTERAPID small support INTERAPID small support Used in conjunction with Dial test indicators, small dial gauges Dial test indicators, dial gauges, precision indicators, electronic probes etc. I-6

139 M EASURING S TANDS Stand with lateral guiding faces. Vertical column that can be moved along the T-slot. Provided with 2 rigid articulations. INTERAPID UD 12 Universal Stand Medium-sized sliding support for dial test indicators (lever-type), dial gauges, electronic probes etc. With fine adjust option. 170 Cast iron base ø17.8 3,3 kg 175 Supplied without indicator 243 ø17.8 Suited carrying case Declaration 200 x INTERAPID UD 12 universal stand Furnished with: Clamp with a 8 dia. tightening Clamping rod, 8 dia., with dovetail recess Measuring table with ground measuring face. Dismountable column. Measuring arm with a 8 dia. tightening. Cast iron table. Chrome-plated steel column. Spherical graphite cast iron arm. INTERAPID UA 1 Measuring stand without fine adjustment 3 kg ø8 180 Supplied without indicator ø Suited carrying case Declaration x INTERAPID UA 1 measuring stand x 100 I-7 I-7

140 M EASURING S TANDS INTERAPID UA 30 Basic component for mounting specific workpiece attachments for series inspection. Basic stand Ground measuring face. 2 T-slots. Dismountable column Cast iron table. Chrome-plated steel column ø8 65 ø x Measuring arm Fine adjustment within a range of 1. 8 dia. clamping bore. Sliding arm Floating holder for TESA YA. Adjustable swinging movement. 13 dia. clamping bore. 35, 57 or 80 travel length. Measuring span 60. Depth stop plate Dimensions: 115 x 35 x 3, vee recess for diameters 120. Two tightening screws INTERAPID UA 30 basic stand (without measuring arm) x 115 Accessories UK 20 measuring arm with fine adjustment UK 25 sliding arm used in conjunction with TESA YA for stationary bore measurement (also see page H-6). UAZ 10 depth stop plate INTERAPID Small Measuring Stand With round steel measuring table. Additional data 4,85 kg (basic stand). 0,85 kg (measuring arm). 1,75 kg (sliding arm). Supplied without indicator Suited carrying case Declaration 197 ø ø22 Measuring arm with a 8 dia. clamping bore, without fine adjustment. Measuring span 48 Measuring table and column in hardened steel 2,7 kg 55 Supplied without indicator 128 x 80 Suited carrying case INTERAPID small measuring stand Ø 49 Declaration I-8

141 M EASURING S TANDS INTERAPID Measuring Stands Supports N o black burnished steel column with a 8 dia. clamping bore N o Chrome-plated column with thread and setting ring for height adjustable measuring arm. 8 dia. clamping bore. Measuring face with dust grooves. N o Chrome-plated steel column. Tilting measuring arm with articulation. 4 or 8 dia. bore for a dovetail clamp or lug. N o Chrome-plated steel column. Sliding measuring arm, horizontally. 4 or 8 dia. bore for a dovetail clamp or lug. 3 µm as per DIN 876 T1, grade 00. Supplied without indicator Suited carrying case ø x 150 ø24, ø35 97 x x ø ø20 ø14 Declaration 180 x x Measuring face Measuring face Fine Span adjustment Granite 100 x Steel, hardened 100 x , Granite 180 x adjustable Granite 180 x adjustable Measuring table Measuring table Column Column kg Granite 100 x 150 x , Granite 120 x 175 x , Granite 180 x 250 x , Granite 180 x 250 x ,5 I-9 I-9

142 M EASURING S TANDS INTERAPID UM 20 Stable stand for measuring small parts accurately. With a 8 dia. tightening plus two 6 dia. clamping bores for the UPZ 6 probeholder. Measuring span kg (measuring stand alone) Supplied without indicatorr Suited carrying case Declaration ø ø x 125 INTERAPID UM 20 measuring stand (without measuring table) Height adjustable table mount with thread and fine adjustment. Clamping groove for UMZ 12 depth stop (No ) Fine adjustment I-10

143 A UXILIARY F IXTURES Brown & Sharpe Adjustable Parallels Available in a set including 6 adjustable parallels Frequently used as parallel pads, setting standards for handheld tools or plug gauges for checking internal dimensions on parallel surfaces. Each parallel consists of two tapered parts dovetailed together Two tighten - ing screws lock parallels to size. Hardened steel Supplied along with a PH 1 screwdriver Plastic bag Heigth Lengthr Width Set of Brown & Sharpe Engineer s parallels, adjustable Consisting of: 1 Parallel 1 Parallel 1 Parallel 1 Parallel 1 Parallel 1 Parallel ROCH Flexible Steel Rules Made from stainless steel Scale divisions to 1 and 0,5. EG class II Stainless springloaded steel Width Thickness , , , , , ,5 Suited carrying case Declaration I-18 I-20

144 A UXILIARY F IXTURES ROCH Thickness Gauges Alloyed steel 100 long blades with max. width of 13 Blades are not supplied individually Plastic bag Declaration Number Thickness Stepping of blades ,05 0,3 0,05 7 0,4 1,0 0, ,05 1,0 0, ,1 2,0 0,1+1 x 0,05 Stainless steel ROCH Radius Gauges Radius gauges with both concave and convex blades Designed for visual assessment of radii. Blades are not upplied individually Plastic bag Declaration Number Radii Stepping Radii of blades x 17 1,0 2,75 0,25 0,1 3,0 7,0 0,5 0, x 16 7,5 15,0 0,5 0, x 15 15,5 19,5 0,5 0,2 20,0 25,0 1,0 0,2 Alloyed steel ROCH Screw Pitch Gauges 60 or 55 flank angles for ISO metric threads or Whitworth threads. Blades are not supplied individually Plastic bag Declaration ISO 60 0,25 0,3 0,35 0,4 0,45 0,5 0,6 0,7 0,75 0,8 0,9 1,0 1,25 1,5 1,75 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 Threads per inch Whitworth ,5 4 I-21I-19

145 Straightness, Angle and Inclination Measurement J-1

146 S TRAIGHT E DGES AND S QUARES DIN 874 T2 NF E Hardened steel to 650 HV 10 Models with length up to 200 in a plastic bag. Models from 300 in a wooden case. Declaration ROCH Bevelled Straight Edges Provided with 1 bevelled edge Also with Heat insulating handle. µm Factory standard Stainless steel to 200 HRB (not tempered) or 550 HV 30 (tempered) ROCH Flat and Try Squares Made from stainless steel Accuracy class 0, not tempered Accuracy class 0 or 1 Suited carrying case Declaration 90 flat squares Length of beams Section µm x x x x x x x x x x 8 10 J-3J-3

147 S QUARES Accuracy class 0, tempered 90 flat squares 90 try squares Length Flat squares Try squares µm of beams section section of beams long beam short beam x x 4 16 x 2 14 x x x 4 18 x 2 14 x x x 5 18 x 2 16 x x x 6 22 x 2 20 x x x 7 26 x 3 24 x x x 8 32 x 3 30 x Accuracy class 1, not tempered 90 flat squares 90 try squares Length of beams Section x x x x x x x x x x x x x x x x x x µm J-4

148 S QUARES Brown & Sharpe Try Square Set Factory standard Hardened steel Suited plastic case Brown & Sharpe Try Square Set Consisting of: 1 Try square 1 Try square 1 Try square µm 68 x x x DIN 875 NF E Stainless steel hardened to 550 HV 30 ROCH Bevelled Edge Squares Made from stainless steel, hardened Accuracy class 00 Suited carrying case Declaration 90 flat squares Length of beams Section of beams x x 4, x x x x x x x x 7 4 µm J-5J-5

149 R A NGLE P ROTRACTORS TESA Angle Protractor with Numerical Indication Decimal or sexagesimal large LC display 2 measuring directions Fine setting Locking device Scales or 500 LCD, 5 digits + sign Measuring ranges: 1 x 360, 2 x 180, 4 x 90 Digit height: 8,5 Resolution: 0,01 or 1 minute of arc (0 01 ) Preset to 0 or 180 Max. perm. error: 4 minutes of arc Max. perm. rotation speed: 1080 /s IP51 (IEC 529) +5 C to + 40 C OPTO RS-232 DATA OUTPUT 3V lithium battery, type CR 2032 Locking/ unlocking scale Fine setting SWISS MADE 0 01' SET MODE ON / OFF SET Digital LC display Locking device Battery life > 3000 hours RS 232, opto-coupled Stainless steel body, hardened Scale Battery location 410 g Wooden case Accessories TESA angle protractor with numerical indication. Provided with a regular scale, 200 long. Scale, 200 Scale, 300 Scale, 500 Extra base with one flat plus one prismatic measuring faces for small angles Edge square for sharp angles 3V lithium battery, type CR 2032, 190 mah For information on connecting cables etc., see section A. Serial Declaration J-6

150 A NGLE P ROTRACTORS 2 circular scales 5 on main scale. Clockwise or counter clockwise reading. TESA EAC Angle Protractors with Dial Circular scale with pointer Easy, reliable readout of both the main and auxiliary scales Very low hysteresis Precision movement mechanism with compensation of play. 10 on the auxiliary scale Stainless steel, hardened Max. perm. error: 5 (without accessory) Plastic case Declaration Scale length x x Optional accessories Scale Scale Auxiliary scale for acute angles up to 15 Cast iron base with steel bottom surface, hardened ETALON 436 Angle Protractor with Vernier Stainless steel, hardened Max. perm. error: 5 (without accessory) Plastic case Declaration Scale Auxiliary scale x x x x Optional Accessories (as shown above) Scale Scale Auxiliary scale for acute angles up to 15 Cast iron base with steel bottom surface, hardened Magnifying glass J-7J-7

151 A NGLE P ROTRACTORS AND S INE B AR Brown & Sharpe Angle Protractor Combination Coonly used as bevelled protractor, ruler, scale, try square, depth and centre gauge as well as spirit level. Hardened steel, wear protected measuring faces Suited plastic case Brown & Sharpe Angle Protractor Combination Consisting of: 1 Ruler graduated in millimetres, 300 long 1 Protractor head with 2 x 90 graduations 1 Centre head 1 Square head with hardened steel scriber Brown & Sharpe Sine Bar Suited for setting ranges from 0 to 60 Sine function for establishing the angle that needs to be set on the basis of the length dimensions obtained from parallel gauge blocks. 5 µm Hardened steel Removable front stop Cardboard box Declaration Centre distance ± 0, x 25 Calculating a 45 setting angle (example) Gauge block combination H H = I sin H = 127 0,70711 H = 89,803 L = 127 H α J-8

152 I NCLINOMETERS AND L EVELS TESA Precision Spirit Levels Used for checking and aligning flat or cylindrical surfaces in the horizontal position. DIN 877 A B /m Precision spirit level with insulating pad For shafts , x 45 x A Precision spirit levels with insulating grip and vial protection, side viewing slots , x 32 x B ,1 100 x 32 x B ,3 100 x 32 x B , x 35 x C , x 35 x C ,1 150 x 35 x C , x 40 x C , x 40 x C ,1 200 x 40 x C , x 45 x C , x 50 x C Longitudinal and cross level vials Flat and prismatic measuring faces See table DIN 2276 Part 1 Wooden case Declaration C TESA Precision Spirit Levels with a Frame For checking and levelling flat or cylindrical surfaces in both horizontal and vertical positions Insulating grips and vial protection Side viewing slots. /m For shafts , x 100 x ,1 100 x 100 x , x 150 x , x 200 x , x 200 x , x 250 x DIN 877 Longitudinal and cross level vials 4 x 90 flat measuring faces, machined to one another. Two of them have a V-shape See table DIN 2276 Part 1 Wooden case Declaration J-18 J-16

153 I NCLINOMETERS AND L EVELS DIN 877 Longitudinal and cross level vials Two flat measuring faces machined to one another (90 ), with a vee slot See table DIN 2276 Part 1 TESA Precision Spirit Levels Magnetic Square Models For inspecting and levelling flat or cylindrical surfaces in both horizontal and vertical positions Attach magnetically on such surfaces Fitted with insulating handle. /m For shafts , x 150 x , x 150 x , x 150 x Wooden case Declaration DIN 877 Longitudinal and cross level vials Hardened and ground base Flat, prismatic measuring faces TESA Precision Spirit Level with Micrometer Element For checking surface flatness and slopes With insulating pads. /m For shafts , x 45 x DIN 2276 Part 1 Wooden case Declaration TESA Protractor Spirit Inclinometer Factory standard Vial For shafts x x 75 x Lengthwise plus transverse vials Flat and prismatic measuring faces Wooden case Declaration J-17 J-19

154 I NCLINOMETERS AND L EVELS TESA Protractor Spirit Inclinometers Factory standard Square model Longitudinal and cross level vials 90 flat meas uring faces with added V-slot, machined to one another. Model with a frame Four 90 measuring faces, machined to one another. Two of them have a V-slot. Wooden case Declaration Vernier Vial For shafts Square model with fine setting for the pivoting vial x 150 x Model with frame and fine setting for the rotating vial x x 150 x TESA Spirit Clinometer with Micrometer Element DIN 877 Longitudinal and cross level vials Hardened and ground base Flat and prismatic measuring faces DIN 2276 part 1 Wooden case Declaration Micrometer Vial For shafts element x x 35 x J-20 J-18

155 Length and Angle Standards K-1

156 G AUGE B LOCKS ISO 3650 TESA Gauge Block Set, metric Nominal lengths 1 to 100 Steel: highly alloyed, wear resistant. Tungsten carbide: wear resistant and stable. Ceramic: stabilised zirconia, extremely resistant to wear and scratches Steel: (11,5 ± 1,0) x 10-6 K -1 Tungsten carbide: (4,23 ± 0,1) x 10-6 K -1 Ceramic: (9,7 ± 0,8) x 10-6 K -1 Limit deviations te on page K-4 Tolerances tv on page K-4 See page K-4 Supplied individually or in sets Wooden case Steel gauges to all grades with DKD certificate. Carbide or ceramic gauges to all grades with UKAS certificate Steel Carbide Ceramic Set compositions Steps Pieces 32-Piece Set M K 1, ,01 1,09 0, ,1 1,9 0, ,0 9,0 1, Piece Set M47 10, 20, 30, K 1, ,01 1,09 0, ,1 1,9 0, ,0 24,0 1, Piece Set M K 1, ,001 1,009 0, ,01 1,49 0, ,5 9,5 0, Piece Set M K 1, ,001 1,009 0, ,01 1,49 0, ,5 24,5 0, Piece Set M K 1, ,001 1,009 0, ,01 1,49 0, ,6 1,9 0,1 4 0,5 24,5 0, , 75 2 K-5K-5

157 L ENGTH AND A NGLE S TANDARDS Brown & Sharpe Angle Gauges For setting and calibration purposes Smallest step to 15 ( 1 /4 ). Hardened steel 30 Width: 6,35 (1/4 in) Length: 76,2 (3 in) Suited plastic case Set composition Set = 12 precision squares K-8 K-8

158 L ENGTH AND A NGLE S TANDARDS Steel Balls Special steel, hardened Steel balls are used to measure internal tapers and the like. TESA Steel Balls (11,5 ± 1,0) x 10-6 K -1 Max. perm. deviation from the nominal size: 20 µm or in. Uniformity of size within a set of three balls having the same nominal size: 1 µm or in r1 Dmax D1 d1 ± 0,5 µm or ± in Full set or set including three balls of same nominal size r2 d2 h2 h1 Wooden case D2 UKAS calibration certificate Step Pieces/ Total Nominal size pieces Steel ball set Steel ball set 1,5 12, Brown & Sharpe Steel Balls Special steel, hardened 3 µm Not available individually Plastic case Step Pieces/ Total Nominal size pieces Steel ball set K-9K-9

159 H EIGHT G AUGES ETALON Height and Scribing Gauges with Digital Display Electronic height and scribing gauges Resolution to 0,01 /0.005 in RS 232 interface Size in Column Base (L x H x W) ETALON height and scribing gauges with digital display x 6 60 x 40 x x x 50 x x x 50 x 160 Optional Accessories Factory standard Slider with interchangeable scriber. Also with back mounted clamping holder having a 8 diameter. Slider with locking screw and fine adjust device. Base has a ground face with dust grooves. Top face also ground. Steel base, hardened DIN 862 For lengths up to 600 = 30 µm 1000 = 40 µm Floating zero Suitable for Length models Scriber Scriber 600, Holder for a dial gauge, axial probe, dial test indicator (lever-type) etc., 8 dia. fixing bore Can be mounted instead of the scriber Rotating and tilting version with a 8 dia. shank Preset and Hold functions Wooden case Declaration N-30