New. Swiss Promo. Shop Proof Technology. TESA-HITE Magna 400 and TESA-Cal. Validity : All prices with VAT excluded
|
|
- Camron O’Brien’
- 5 years ago
- Views:
Transcription
1 Validity : All prices with VAT excluded Swiss Promo TESA-HITE Magna 400 and Shop-Proof Technology protected against water oil dust New Shop Proof Technology TESA-Cal IP
2 2 Based on TESA technology that has proved effective for more than 25 years, the two new TESA-HITE MAGNA 400 and 700 height gauges equipped with the patented MAGNAµSYSTEM are able to withstand extreme workshop conditions especially splashing oil and water as well as dust particles. Their exceptional features make them indispensable for the workshop while offering the most favourable price-performance relationship TESA-HITE Magna Resistant to extreme workshop conditions Order Description Measuring Application range Precision number span with standard accessory µm / in mm / in or S option L in m/in mm / in TESA-Hite Magna / / TESA-Hite Magna / / TESA-HITE Precision in motion TESA-Hite / ,5+4 L / TESA-Hite / ,5+4 L /
3 TESA-HITE Magna 400 and 700 New Shop Proof Technology epeatability Normal Launch 2s) Mechanical (frontal) prices prices m / in µm / in Special prices
4 4 TESA Micro-Hite TESA Micro-Hite, manual The metrological reference for the workshop Order Description Measuring Application range Precision Repeatability Mechanical Normal Special number range with standard accessory µm / in (2s) (frontal) prices prices mm/in or S option L in m/in µm / in µm / in µm / in Micro-Hite / L / L Micro-Hite / L / L Micro-Hite / L / L POWER PANEL
5 5 The metrological reference TESA Micro-Hite and TESA Micro-Hite plus M provide user-friendliness, robustness reliability and autonomy that make them different from the other height gauges. Each product comes with a SCS calibration certificate, thus guaranteeing full compliance and traçeability to international standards TESA Micro-Hite, motorised The speed of the manual version combined with the precision of the motorised one Order Description Measuring Application range Precision Repeatability Mechanical Normal Special number span with standard accessory µm / in (2s) (frontal) prices prices mm/in or S µm / in L in m/in µm / in µm / in Micro-Hite / ,5 L 0,5 / / L / Micro-Hite / ,5 L 0,5 / / L / Micro-Hite / ,5 L 0,5 / / L / D control panel POWER PANEL Plus M POWER PANEL Plus M with built-in printer
6 6 TESA Shop-Cal ABSOLUTE functionality Order Measuring Normal Special number span price price mm TESA-CAL IP , 200, 300 mm The Must 268 Order Measuring Protection Thumb Normal Special number span to IP 67 roller prices prices mm TESA-CAL IP 67 with short-cut measuring face for depth measurement New 260 TESA-CAL IP 67 with rounded measuring faces for internal measurement Order Measuring Protection RS 232 Normal Special number span to IP 67 data price price mm output Order Measuring Protection RS232 Normal Special number span to IP 67 data prices prices mm output
7 Dial calipers Order Measuring Reading mm/ Normal Special number span mm revolution prices prices mm , , ROCH Vernier calipers Order Measuring Reading Normal Special number span mm price price mm , TESA Vernier calipers with rounded measuring faces for internal Measurement Swiss made Precision to DIN 862 / NF E Hardened stainless steel Satin-chrome scale background, wear protection Supplied with inspection report and declaration of conformity Order Measuring Reading Normal Special number span mm mm prices prices , , , , , , Depth calipers with a f lat measuring face Precision to DIN 862 (Style C) and NF E Removable bridge for all models (optional) Order Measuring Reading Normal Special number span mm prices prices mm , ,
8 8 TESA-Scope TS 100 TS Non-contact measurement based on prof ile projection has become one of TESA s main focuses TESA-Scope II 300V Order Description Measuring table TS 100 TS 300 Normal * Special * number 200 x 100 mm digital control prices prices 8 x 4 in readout panel TESA-Scope II 300V - TS TESA-Scope II 300V - TS TESA-Scope II 355H TESA-Scope II 355H - TS TESA-Scope II 355H - TS *Objective not included All TESA-Scope profile projectors include high-quality components, whether optical or mechanical. To make a success of this valuable product range, each TESA-Scope 300 V, 355 H and 500 V is provided with either a TS100 digital readout unit or a TS300 control panel equipped with powerful metrology software.
9 TESA Rugosurf 10 Versatile and compact surface roughness tester designed for use in the workshop or the inspection laboratory. Roughness parameters Ra - Rq (RMS) - Rt - Rz - Rc - Rsm - Rmr calculated to ISO Pt - R - Rx - AR calculated to ISO (CNOMO) Technical data Measuring span : 160 µm (± 20 µm et ± 80 µm) Resolution : 0,01 µm 0,04 µm Cut-offs : λc = 0,25-0,8-2,5 mm. Choice between 2, 3, 4 or 5 cut-offs TESA Rugosurf 10 Order Description Normal Special number price price TESA Rugosurf 10 set Comes complete with probe, battery pack, calibration specimen, 8 mm diameter fi xing rod, instructions for use and declaration of conformity.
10 10 TESA Veribor light New TESA Veribor Light Order number Application Normal Special range mm prices prices Dial gauge not included 432
11 TESA TPS New motorised presetting bench for nearly any type of measuring tools 11 New From 7964 TESA TPS Order Description Measuring range Measuring range Resolution Max. perm. Repeatability Digital Launch number for internal for external error (2s) output price dimensions dimensions mm / in mm / in mm µm µm TPS 300* ,001 1,5 + L/300 1 RS 232 From (L in mm) TPS 500* ,001 1,5 + L/300 1 RS (L in mm) on request TPS 1000* ,001 1,5 + L/300 1 RS (L in mm) on request * Full documentation available on request
12 12 ETALON Basic External micrometers Order Description Measuring Normal Special number range mm prices prices ETALON Basic Jeu ETALON Basic TESA Micromaster Model Easy 216 Order Description Measuring Normal Special number range mm price price Micromaster Easy Models IP 54 Order Description Measuring Normal Special number range mm prices prices Micromaster IP Micromaster IP Micromaster IP Micromaster IP
13 13 TESA Imicro Tool Sets 2312 Analogue reading Order Application range Normal Special number mm prices prices ,5 6, ROCH Alesometer Tool Sets 2196 Analogue reading Order Application range Normal Special number mm prices prices
14 ETALON Basic or COMPAC dial gauges Order Description Resolution Measuring Dial Shockproof Normal Special number mm travel mm Diameter mm prices prices ETALON Basic 0, ETALON Basic 0,001 0, COMPAC 0, K COMPAC 0, Dial indicators Order Description Reading Measuring Dial Normal Special number travel mm Diameter prices prices mm TESATAST 0,01 0, TESATAST 0,01 0, INTERAPID 0,01 1,6 37, INTERAPID Holder UJ15 Order number * Normal price Special price Holder with articulated arm Length 310 mm Order number * Normal price Special price * Without dial gauge 156
15 15 ETALON 560 ETALON gauge block sets Order Number Accuracy Normal Special number of gauge blocks grade prices prices Supplied with a COFRAC calibration certifi cate (equivalent to SCS, DKD, SIT, UKAS and the like) New TESA general catalogue available from February 2007 To get a free copy, please send your to tesainfo@hexagonmetrology.com with full name and address along with desired language and version i.e. French, German or English, hardcopy or CD.
16 16 New TESA Spacer 100 and m 200 m TESA Spacer 100 and 200 Order number Description SPACER 100 SPACER 200 Measuring range m m Precision ± 1,5 mm ± 2 mm Surface m2 Volume m3 Highest value good reasons for choosing a TESA s product 1. Finest raw materials 2. Guaranteed precision throughout the measuring range 3. Latest technology 4. Individual inspection and calibration 5. Long-term dependability Pocket-size, easy-to-use laser meters for long distances Lowest value Distance with 2 additional measurements Distance with 3 additional measurements Partial distance with 3 additional measurements Timer Spirit level Viewfi nder, 2 x Normal price Launch price When you need to be sure Printed in Switzerland - Modification rights reserved Ver. 18 TESA SA Switzerland Bugnon 38 CH-1020 Renens Tél. +41 (0) Fax +41 (0) ventesuisse@ch.bnsmc.com TESA FRANCE SAS 13-15, av. Georges de La Tour F Lunéville Cedex Tél. +33 (0) Fax +33 (0) tesa-france@ch.bnsmc.com TESA Deutschland Hexagon Metrology GmbH Netzestraße 32 D Ludwigsburg Tel. +49 (0) Fax +49 (0) tesa-de@ch.bnsmc.com TESA Technology UK Metrology House Halesfield 13 Telford, Shropshire TF7 4PL Tel Fax uksales@ch.bnsmc.com TESA Technology ITALIA s.r.l. Via Bizzozzero, Cormano (MI) Tel. +39 (0) Fax +39 (0) italia@ch.bnsmc.com TESA Technology Ibérica Av. de Vizcaya s/n Apart. 202 ES Ermua Tel Fax iberica@ch.bnsmc.com BENELUX Pascal Siebens Generaal de Wittelaan 17 Bus 21 B-2800 Mechelen Tel. +32 (0) Fax +32 (0) psiebens@ch.bnsmc.com Headquarters : TESA SA Bugnon 38 CH-1020 Renens Switzerland Tel. +41(0) Fax +41(0) tesainfo@hexagonmetrology.com
TESA IMICRO capa µ system with Digital Display
DIN 86 T4 (Style C1) 0,001 0.0005 in TESA IMICRO capa µ system with Digital Display A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. Metric/inch Conversion
More informationПОСТАВЩИК: Компания ООО"ИНТЕХСЕРВИС" ,г.Москва,ул.Гурьянова,д.2,корп.2 тел./факс: 8(499) E mail:
Calipers B-1 E LECTRONIC C ALIPERS DIN 862 (Style 1A-ZS) 0,01 0.0005 in LCD, 7 Floating zero TESA CAL IP67 magna µ system Patented measuring system TESA magna µ system New electronic caliper The highest
More informationMeasuring. Affordable. Effective. Instruments
Measuring Effective Affordable Instruments 2 Electronic Calipers 00534002 00534003 00534020 n Stainless steel frame n Thumb wheel for rapid setting n Direct Metric/Inch conversion n Accuracy to 0,02 mm
More informationInternal Measurement. D-1
www.tesatechnology.com D-1 THE CHALLENGES OF INTERNAL MEASUREMENT Bore measurement is more difficult than external measurement of components. Apart from the very tight tolerances specificied, all measuring
More informationTESA Clearance Sale TESA CAL IP67 DIGITAL CALIPERS (METRIC ONLY) DIGITAL LIGHT CALIPERS DIGITAL DEPTH LIGHT CALIPERS ETALON DIAL CALIPERS
CLEARANCE SALE TESA Sale Validité: 31.10.2016 ou épuisement des stocks Gültig bis 31.10.2016 oder solange der Vorrat reicht Validity: 31.10.2016 or while stock lasts TESA CAL IP67 DIGITAL CALIPERS (METRIC
More informationTESATAST Standard Models
TESATAST Standard Models 0110005 0,01 0, 2 0 0,4 0 12,53 0110006 0,01 0, 3 0 0,4 0 12,53 0110007 0,01 0,5 2 0 0,25 0 36,53 011000 0,01 0,5 3 0 0,25 0 36,53 0110009 0,002 0,2 2 0 100 0 12,53 0110010 0,002
More informationInternal Measurement. Internal Measurement C-1
Internal Measurement Internal Measurement C-1 Internal Measurement Internal Measuring and Requirements Internal measuring of bores is more demanding than external measurement of workpieces. Not only the
More informationMARSURF PS1 I ABSOLUTE MOBILITY FOR SURFACE ROUGHNESS MEASUREMENTS
+ MARSURF PS1 I ABSOLUTE MOBILITY FOR SURFACE ROUGHNESS MEASUREMENTS 2 MarSurf. Mobile Surface Roughness Measurement ABSOLUTE MOBILITY WITH MARSURF PS1 Large display All the information you need at a glance.
More informationStraightness, Angle and Inclination Measurement
Straightness, Angle and Inclination Measurement Straightness, Angle and Inclination Measurement H-1 Straightness, Angle and Inclination Measurement Levels with Natural Measuring Base Mechanical instruments
More informationHeight Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationCALIBRATION SYSTEM CERTIFICATE
CALIBRATION SYSTEM CERTIFICATE With respect to products (measuring instruments and testing instruments), we hereby certify that we have established our calibration system traceable to the national (international)
More informationROUGHSCAN SURFACE ROUGHNESS TESTER OPERATIONAL MANUAL
SURFACE ROUGHNESS TESTER OPERATIONAL MANUAL Bms Bulut Makina Sanayi Ve Ticaret Ltd. Şti. İkitelli Organize Sanayi Bölgesi Dolapdere Sanayi Sitesi Ada 4 No : 7-9 İkitelli / İSTANBUL-TÜRKİYE Phone : +90
More informationMeasurement & Calibration
Measurement & Calibration MIC TRAC 4000 In-House Precision Gage Calibration System Inspect Parts, Calibrate, and Track Gages Step 1: Find what type of gages you have. Gages & Indicators for Calibration
More information200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until
3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier
More informationYOUR MITUTOYO PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
More informationCaliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 10 I. DIMENSION (Basic Measuring, Gauge etc.) 1. PLAIN PLUG / WIDTH/ DEPTH/ Upto 100 mm 1.9 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ 100 mm to 300 mm 3.8
More informationMITUTOYO'S 80 YEAR ANNIVERSARY PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
More information0268 Gear tooth calipers
0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26
More informationTHE RANGE OF TORNOS MACHINING CENTERS. think parts Think Tornos. almac FB CNC 3 to 6-axis horizontal bar milling machine.
THE RANGE OF TORNOS MACHINING CENTERS think parts Think Tornos almac FB 1005 CNC 3 to 6-axis horizontal bar milling machine. Productivity and precision from 3 to 6 axes Wide range of applications In any
More informationPage : 1 of 16. FIELD OF TESTING : Calibration and Measurement CALIBRATION & MEASUREMENT CAPABILITY EXPRESSED AS AN UNCERTAINITY *
Metrix Precision Pte Ltd Certificate No. : LA-2014-0581-C No. 23 Tagore Lane #02-03/04 Tagore 23 Warehouse Issue No. : 2 Singapore 787601 Date : 29 July 2016 FIELD OF TESTING : Calibration and Measurement
More informationYour partner for highest precision. distributed by Tel
Your partner for highest precision. Käfer Messuhrenfabrik since 1932 The specialist in Dial Gauges We offer a broad manufacturing programme of more than 1000 standard versions of Dial Gauges Dial Test
More information0230 / 0231 Workshop calipers with parallax-free reading
0230 / 0231 Workshop calipers with parallax-free reading Parallax-free reading Reading parts have a satin chrome finish Knife points for measuring range 500 mm: 20 mm Direct reading of internal and external
More informationStandard Scales SERIES 182 Made of Low-Expansion Glass. Working Standard Scales SERIES 182 E-32
Standard Scales SERIES 182 Made of Low-Expansion Glass High-precision glass scales manufactured under Mitutoyo s leading-edge Linear Scale production technology. High accuracy is guaranteed to be used
More informationCal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm
More informationTemperature multi-function calibrator Model CTM
Calibration Temperature multi-function calibrator Model CTM9100-150 WIKA data sheet CT 41.40 for further approvals see page 3 Applications Testing and calibration of all types of temperature measuring
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More information0280 / 0281 Vernier depth gauges
0280 / 0281 Vernier depth gauges Reading parts have a satin chrome finish 862 Low-set master scale Measuring rod with interchangeable pin High-precision laser graduation on the vernier and scale Cardboard
More informationTest Indicators. Dial Test Indicators MEASURING TOOLS & INSPECTION INSTRUMENTS. Dial Test Indicators. Long Range Dial Test Indicators. Inch.
Meets DIN2270 or BS2795 standard Satin chrome finish, brass body, anti-magnetic Jeweled bearing, shock-proof Interchangeable carbide contact point, 0.0787 /2mm diameter ball, supplied with wrench Probe
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More informationCentral Mechanical Engineering Research Institute, Mahatma Gandhi Avenue, Durgapur, West Bengal
Last Amended on 23.09.2014 Page 1 of 9 I. DIMENSION 1. GAUGE BLOCKS $ 0.5 mm to 25 mm 25 mm to 50 mm 50 mm to 75 mm 75 mm to 100 mm 2. LENGTH BAR $ Upto 300 mm 300 mm to 600 mm 300 mm to 1000 mm 0.11µm
More informationConductivity Measurement CLM 280
Technical Information TI 347C/07/en/07.03 51511754 Conductivity Measurement CLM 280 Battery-driven pocket meter for conductivity and resistance measurement Application CLM 280 is a compact pocket meter
More informationThis section covers the comprehensive range of Torque Calibration equipment manufactured by Gedore Torque.
Torque Calibration Introduction This section covers the comprehensive range of Torque Calibration equipment manufactured by Gedore Torque. Torque calibration equipment is used for the testing, calibration
More informationR130/R135 TH-170 MANUAL MANUAL. Universal hardness tester. Roughness tester
MANUAL R130/R135 MANUAL TH-170 Roughness tester Universal hardness tester Changes in products and/or product specifications can emerge due to new technologies and continuous development. We reserve the
More informationDigimar 816 CL. Versatile. User-friendly operation... The measuring program... Precise measuring results...
- 2-8 Digimar 816 CL The new Height Measuring Instrument Digimar 816 CL. You want to obtain highly accurate measurement results without any complicated procedures? With the Digimar 816 CL you have the
More informationExplanations. 6 Protection (IP-Code) acc. to DIN / IEC etc. Several Icons. Manufacturing process
info@vogel-germany.de - ww.vogel-germany.de Explanations 1 2 4 5 6 8 9 10 11 In our catalogue you will find several pictograms beside the text description. They should be helpful for a quick and easier
More informationOptidew Vision Optical Dew-Point Meter
Optidew Vision Optical Dew-Point Meter Chilled Mirror Instruments A precision hygrometer, combining drift free measurement with the flexibility of a remote sensor. Ideal for laboratory and industrial measurements,
More informationAccessories for the measurement of tightening torque. Digital and electronics dynamometric wrenches
Accessories for the measurement of tightening torque Digital and electronics dynamometric wrenches Methods used for the measurement of tightening torque For an effective analysis of the tightening process,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Laboratory locations: Unit 9 G B Quality ssurance (Consultants)
More informationtesting and measuring instruments for vehicle wheels
testing and measuring instruments for vehicle wheels en testing and measuring instruments for vehicle wheels For more than 20 years MAKRA has been manufacturing measuring and testing equipment for the
More informationQA Tech (A Division of GMP Technical Solutions Pvt. Ltd.), L-73, Verna Industrial Estate, Verna Salcette, Goa
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10µm Φ 0 to 300 mm 13 µm Using Caliper Checker; & T.C. Gauge Block Set by Comparison L.C. :- 20µm 0 to 1000 mm 22 µm Using Caliper Checker;
More informationMetallic materials Rockwell hardness test. Part 2: Verification and calibration of testing machines and indenters
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 6508-2 Third edition 2015-03-01 Metallic materials Rockwell hardness test Part 2: Verification and calibration of testing machines and indenters
More informationIntroduction to Torque Calibration
Introduction to Torque Calibration Calibrate THE IMPORTANCE OF TORQUE CALIBRATION Regular Torque Tool calibration guarantees repeated accuracy and adherence to International Standards. Calibration also
More informationAlcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
More informationMilling EDM Laser Additive Manufacturing (AM) Tooling and Automation Customer Services. Wire cutting
Milling EDM Laser Additive Manufacturing (AM) Tooling and Automation Customer Services Wire cutting GF Machining Solutions wire-cutting EDM is fast, precise and increasingly energy efficient. From ultraprecise
More informationHigh ingress protection ratings make a difference REO EMC-Filter with IP66
High ingress protection ratings make a difference REO EMC-Filter with IP High protection classes up to IP for REO EMC filter The use of electrical and electronic equipment continues to increase, for example
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that SP Metrology System Thailand Co., LTD 88/115
More informationPenetration. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
More informationCallisto 100. Cold Filter Plugging Point Tester
Callisto 100 Cold Filter Plugging Point Tester Cold Filter Plugging Point The Cold Filter Plugging Point (CFPP) method is used to determine the low-temperature operability of diesel fuel, biodiesel, blends
More informationMARKALAMA CİHAZLARI. Çiziciler. Pergeller. Markalama Kumpasları. Markalama Kumpasları. Özel Markalama Kumpasları. Yükseklik ve Markalama Mihengirleri
MARKALAMA CİHAZLARI 2 3 5 7 10 14 Çiziciler Pergeller Markalama Kumpasları Markalama Kumpasları Özel Markalama Kumpasları Yükseklik ve Markalama Mihengirleri 0301 Precision dividers With a rivetted hinge
More informationPrice List. Calibration Fee
3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel. +66 577 5100 (Please contact : Customer Service Section Ext. 3101, 310) Fax. +66 577 3659 E-mail : cs@nimt.or.th Website : http://www.nimt.or.th
More informationPerfect Liquid Handling PRECISE RESULTS WITH INNOVATIVE TECHNOLOGY
Perfect Liquid Handling PRECISE RESULTS WITH INNOVATIVE TECHNOLOGY Reliability from development to service. Tradition Quality VITLAB can look back on a history of almost 100 years. VITRI GmbH & Co. KG
More informationPMA 5. Pensky-Martens Flash Point Tester. ::: Volatility... Flammability
PMA 5 Pensky-Martens Flash Point Tester ::: Volatility... Flammability A Tradition of Competence 140 years of developing, producing and supporting excellent flammability instruments. 140 years of technology
More informationMANUAL R-130 / R-135
MANUAL R-130 / R-135 CONTENTS 1. DESCRIPTION 2 2. SPECIFICATION 3 3. MEASUREMENT PARAMETERS 4 4. FEATURES 5 5. BATTERY INSTALLATION /REPLACEMENT 6 5.1 Controls and digital display 6 6. CALIBRATION 7 7.
More informationMeasuring on Machine Tools m&h Touch Probe Systems
www.mh-inprocess.com Measuring on Machine Tools m&h Touch Probe Systems 1 2 Precision at the workpiece Since its inception in 1991, m&h Inprocess Messtechnik GmbH has become a technological leader in the
More informationGauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
More informationL éditorial. Robert Renaud
L éditorial Dear Customer, This first part of our flyer is usually reserved to our President, Mr. Christophe Bevillard but, exceptionally, I would like to address this editorial and furthermore introduce
More informationWelcome to Garber C O R P O R AT E O V E R V I E W
CORPORATE OVERVIEW Garber Metrology is one of the only companies in the Mid-Atlantic Region that combines full service weighing solutions, a wide range of calibration /metrology services and a broad scope
More information2 HEXAGON MANUFACTURING INTELLIGENCE HexagonMI.com
GLOBAL S DATA SHEET 2 HEXAGON MANUFACTURING INTELLIGENCE HexagonMI.com GLOBAL S The Coordinate Measuring Machine that Pushes Productivity Further The GLOBAL S coordinate measuring machine (CMM) series
More informationRev /07/2015 CATALOGUE - CALIBRATION SERVICES 1
Rev. 02 07/07/2015 CATALOGUE - CALIBRATION SERVICES 1 OVER 100 ITEMS We are proud to present to you our new catalogue for 2015. In the following pages we present more than 100 instrument types, which we
More informationHydraulic piston PA PAC PAD. Series
Hydraulic piston pumps PA PAC PAD Series Contents Design of.... 1 Range and characteristics... 2 Characteristics and dimensions... 3 Performance.... 4-5 Accessories.... 6 Shaft sealing... 7 New models
More informationAVL Particle Measurement System Aviation
AVL Particle Measurement System Aviation Measurement of non-volatile Particulate Matter mass and number emissions from aircraft turbines according to the AIR6241 MARKET REQUIREMENTS Non-volatile particulate
More information140,- 329,- 210,- 329,- 739,- 509,- 350,- 126,- 117,- 126,- 434,- 217,- 488,- 586,- 524,-
AUGUS - OCOBER 07 AUGUS - OCOBER 07 RADIO CONROLLED WALL CLOCK Q O UA Available in Ø0 og Ø0 cm. AA battery operated. P Ø0 cm LI Y 9,- 0 Ø0 cm 09,- 0 DIGIAL INDICAOR DIAL INDICAOR + MAGNEIC SAND Base: 6
More informationAccurate Measurements, Plot No.103, D Block, Meethapur Ext., Badarpur, New Delhi. Discipline Mechanical Calibration Issue Date
Last Amended on 11.11.2014 Page 1 of 6 I. DIMENSION 1. Dial/ Digital Vernier Caliper $ L.C.: 0.01mm Φ 0 to 200 mm 7.5 µm Using Slip Gauge Set & L.C.: 0.01mm Φ 0 to 300 mm 12.17 µm Using Slip Gauges & Caliper
More informationMeasuring tools. Accuracy in measurement. Test-safe use. Multiple versions. Torque wrenches. Vernier calipers Spirit levels Mason s profiles
Measuring tools Torque wrenches Vernier calipers Spirit levels Mason s profiles Try squares Feeler gauges Other measuring tools Measuring tapes Accuracy in measurement Measuring tapes, torque wrenches
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service Issue No: 028 Issue date: 10 pril 2018 ccredited to 6 Banner Park Wickmans Drive Coventry CV4 9X Contact: Keith rnold Tel: +44 (0)2476 426 316/317
More informationInstitute for Design of Electrical Measuring Instruments, Swatantryaveer Tatya Tope Marg, Chunabhatti, Sion, Mumbai, Maharashtra
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1 Calipers $ Up to 600 mm 10.4 µm Using Caliper Checker by Up to 1000 mm 13.2 µm Using Long Slip Gauge by 2 Height Gauges $ Up to 600 mm 12.8 µm Using
More informationALMAC CU Ultra precise 3 to 5-axis machining centre
T H E R A N G E O F T O R N O S M A C H I N I N G C E N T E R S T H I N K P A R T S T H I N K T O R N O S ALMAC CU 1007 Ultra precise 3 to 5-axis machining centre THE SMALLEST OF THE BIGGEST Requiring
More informationTechnical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 134 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 134
More informationMETROLOGY In Germany at home in demand worldwide.
METROLOGY 2015 In Germany at home in demand worldwide www.helios-preisser.de METROLOGY 2015 In Germany at home in demand worldwide Dear HELIOS-PREISSER Customer, One company, one team, many new aspects,
More informationOPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION
OPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION FROM APRIL 1 THROUGH MAY 31, 2015 GENERAL PRE1316 U-WAVE Measurement Data Wireless Counication System Counication distance approx. 20 m Software
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More informationCetemet, your ally for your innovative ideas
Cetemet, your ally for your innovative ideas METROLOGY Lab CLIMATE TESTS Lab WELDING AND MATERIALS Lab METROLOGY Services Metrology services 3D Digitizing for dimensional control and reverse engineering
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-2 Second edition 2008-04-15 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under
More informationThermo-hygrometer-anemometer VT 210
Thermo-hygrometer-anemometer KEY POINTS 2 inputs fot Pt100 temperature Measurement of temperature, hygrometry and air velocity (from -200 to +600 C) (depending on models) Up to 6 measurements simultaneously
More informationThermo-hygrometer-anemometer VT 210
Thermo-hygrometer-anemometer KEY POINTS Measurement of temperature, hygrometry and air velocity (depending on models) Interchangeable modules 2 inputs fot Pt100 temperature (from -200 to +600 C) Up to
More informationInstruments for Chemical and Petroleum Products. Flash Point
Instruments for Chemical and Petroleum Products Flash Point A Tradition of Competence 140 years of technological advances lie between the first flash point tester and today s Anton Paar product line of
More informationYour application, our mobility. Do you need mobility to enable your application?
Your application, our mobility Do you need mobility to enable your application? Since 2001, BlueBotics provides engineering services and custom solutions to support your product development and enable
More informationSuperstatic 440. Static Heat- and Cooling Meter. Application
Superstatic 440 Static Heat- and Cooling Meter Application Design The Superstatic 440 is a static heat- and cooling meter according to standard EN1434 class 2 based on the fluid oscillation principle,
More informationSuperstatic 440. Static Heat Meter, Static Cooling Meter. Application
Superstatic 440 Static Heat Meter, Static Cooling Meter Application Design The Superstatic 440 is a static heat or cooling meter according to standard EN1434 class 2 based on the fluid oscillation principle,
More information... CALIBRATION SERVICES PRICELIST. M&B Calibr. Accredited calibration company. No according to ČSN EN ISO/IEC
M&B Calibr... CALIBRATION SERVICES PRICELIST Accredited calibration company No. 2301 according to ČSN EN ISO/IEC 17025. Experience since 1991 Guaranteed quality Professional attitude www.mbcalibr.cz You
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0752 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I DIMENSION 1. Caliper $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 0 to 1000 mm 12.2 µm 13.3 µm Using Caliper Checker, Slip Gauge Block & 2. Depth Caliper $ (Vernier/Dial/Digital)
More informationAccurate Labs, 311, 312 Govinda Complex, GIDC Char Rasta, Vapi, Valsad, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 9 I. DIMENSION 1. CALIPER $ Vernier L.C. 0.01mm 7.5 µm 9.0 µm Using Caliper Checker & Slip Gauges L.C. 0.05mm 29.5 µm 30.0 µm Dial / Electronic L.C. 0.02mm 12.5 µm 13.5 µm 2.
More informationOperating Instructions for Pressure Transmitter with Digital Display. Model: PDA
Operating Instructions for Pressure Transmitter with Digital Display Model: PDA 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Operating Principle... 3 5. Regulation Use...
More informationBeissbarth MLD 815. Digital headlight measurement and adjustment. TÜV-certified (prototype technical release) Cross and alignment laser
Headlight Testing Beissbarth MLD 815 Digital headlight measurement and adjustment TÜV-certified (prototype technical release) Cross and alignment laser CMOS camera for real-time image processing Integrated
More informationElcometer 506 Pull- Off Adhesion Gauge. elcometer.com 1
Elcometer 506 Pull- Off Adhesion Gauge elcometer.com 1 Elcometer 506 STANDARDS: ASTM D4541, ASTM D7234, AS/NZS 1580.408.5, BS 1881-207, DIN 1048-2, EN 12636, EN 13144, EN 1542, EN 24624, ISO 16276-1, ISO
More informationE905-WFMW + RP991BLMW E901-WFMW + RP995BLMW E905-WFMW + RP999MW
Magnetic Bases and Fitments Magnetic Bases All units are suitable for use with dial indicators and test dial indicators 900 and 901 versions both have push button ON/OFF control 905 model has a toggle
More informationmass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS ECO pressure and temperature compensated easy and cost effective installation of the sensor no pressure loss caused by the sensor no moving parts, i.e. maintenance
More informationEnvironment Clean Room Specification
Environment Clean Room Specification ISO Class 4 *1 (ISO14644-1) Built-in vacuum piping Possible to mount the main body without removing the external cover etc. Body-integrated linear guide specification
More informationAmruta Electronics Corporation
+91-8048603192 Amruta Electronics Corporation https://www.indiamart.com/amruta-electronics/ Our organization is known in the market for importing and trading an advanced range of Ultrasonic Detector &
More informationBlock Gauge Family Digital and Analogue Universal Gauges
world leaders in the art of linear measurement Block Gauge Family and Universal Gauges Datasheet 502624 Issue 3 NEW Mechanical Outline Features, and Total Measuring Range Repeatability: < 0.25 µm Compact
More informationUGE 180 N, 2 UGE 180 N UNDERFLOOR WHEEL LATHE
UGE 180 N, 2 UGE 180 N UNDERFLOOR WHEEL LATHE BASIC SPECIFICATIONS Range of wheel tread diameters: Maximum axle load: Available multi track gauge version 350 to 1,270 mm 18 10 kn PURPOSE The UGE 180 N
More informationIntelligent Positioner
Intelligent Positioner Construction The GEMÜ 1 µpos is a digital electro-pneumatic positioner for process valve control. Designed for simple, safe and quick use with valves with strokes < mm. The positioner,
More informationThe solution for production of turned workpieces up to 20 mm in diameter.
think parts Think Tornos Gamma 20 The solution for production of turned workpieces up to 20 mm in diameter. CAPABILITY AND PRODUCTIVITY An economical solution for the AUTOMOTIVE, ELECTRONICS and MEDICAL
More informationTRI-STATE INSTRUMENT SVC, INC
CALIBRATION RATE POLICY AND PRICING 2017 Typically, compliance with ISO-900x and TS 16949 specifications require LONG FORM calibration reports in the following formats. Format #1 -- Before Adjustment or
More informationCOMPAC Dial Test Indicators
DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface
More informationElcometer 311. Elcomotor Refinishing Gauge. Types F and FNF. Operating Instructions
Elcometer 311 English Elcomotor Refinishing Gauge Types F and FNF Operating Instructions English Equipment described in these instructions is covered by the following Patents: FNF UK Patent No: GB2306009B
More informationOperating Instruction for Electronic Pressure Switch. Model: PDD
Operating Instruction for Electronic Pressure Switch Model: PDD 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Mechanical
More informationInstructions for checking caliper gauges of the series Int/Odi and ID/OD - absolute measurement
Instructions for checking caliper gauges of the series Int/Odi and ID/OD - absolute measurement 1 Generalties This instruction follows the checking instructions for caliper gauges according to VDI/VDE/DGQ
More informationAutomated Precision Weighing
Automated Precision Weighing Designed for Automation Compact Precision Weighing High precision Designed to meet the most demanding customer specifications. The WMS is a high speed high accuracy weigh module
More informationTime Electronics. Calibration, Test and Measurement. Portable Process and Pressure Calibration Instruments
Time Electronics Calibration, Test and Measurement Portable Process and Pressure Calibration Instruments Calibrators Simulators Sources Pumps Gauges www.timeelectronics.com Loop & Temperature Calibration
More information