Hull & Engine Room Fittings

Transcription

1 Section 2 Contents Hull & Engine Room Fittings SECTION 2 2 Six Depots Nationwide 2-4 Water Strainers 4-5 Bronze Strainers Skin Fittings & Scoops 6-7 Brass & Chrome Skin Fittings, Gratings & Seawater Strainers 8 Bronze Flanges, Flanged Strainers and Valves 9-22 Anodes Impellers Shaft Bearings 0- PSS Shaft Seals 2 Waterlock/Silencers & Exhaust Hose Exhaust Fittings 4-5 Lubricants & Insulation 6 Fuel Filters & Accessories 7 Greasers & Lubrication 8-9 Deck Fillers & Fittings 40-4 Plastic Fuel Tanks & Accessories 42 Tank Vents & Miscellaneous 4 Tank Senders & Gauges Aquafax Limited, 4 Dencora Way, Sundon Business Park, Luton, Beds LU HP Tel:(0582) Fax:(0582) Aquafax Ltd. (Hamble), -2 Mitchell Point, Ensign Business Park, Hamble, Southampton SO 4RF Tel:(02) Fax:(02) Aquafax Ltd. (Plymouth), Unit 5 Plymouth Trade Park, 22 Macadam Road, Plymouth PL4 0RU Tel:(0752) Fax:(0752) Aquafax Ltd. (Middlewich), Unit, Valley Court, Sanderson Way, Middlewich, Cheshire CW0 0GF Tel:(0606) 84 Fax:(0606) 8488 Aquafax Ltd. (Wroxham), Unit, Stalham Road Ind. Estate, Littlewood Lane, Hoveton, Norfolk NR2 8DZ Tel:(060) 7888 Fax:(060) 7898 Marinac Scotland (Aquafax Glasgow), 0-05 Barrie Road, Hillington Park, Glasgow G52 4PX Tel: (04) Fax: (04) 885 CATALOGUE I UPDATED SECTION 2

2 Water Strainers WATER STRAINERS WATER STRAINER - FISHERMAN MODEL A top quality engine inlet strainer. Popular with professional boat users due to cap on larger sizes being fitted with wing nuts. Cast in Bronze with inner removable synthetic filter gauze Perforations 2mm dia. Thread: BSP Parallel ISO 228/ (BS 2779) (DIN 259) BSP Size OA approx Part No. Spare Gauze & Dimensions 2" 40 x 55mm dia x 25mm OD 4" 50 x 57mm dia x 29mm OD " 20 x 85mm dia x 8mm OD with wing nut fittings 4" 250 x 90mm dia x 45mm OD with wing nut fittings 2" 250 x 90mm dia x 45mm OD with wing nut fittings WATER STRAINERS BULKHEAD MOUNTED WATER STRAINER Nickel plated Brass body Threaded vertical F/inlet and horizontal F/Outlet Top sealed by neoprene O ring AISI 6L S/S filter basket Fixing lug on bowl side Available with metal, or clear PA6 polyamide top Supplied with top removing tool Filter perforation mm Dia. Approved by R.I.N.A. - Copy certificates available Metal Top Clear Top G*/BSP Weight** (g) H (mm) H (mm) L (mm) A (mm) B (mm) Hf (mm) Df (mm) Flow 0. Bar Flow Bar " 2" 4" 90 (970) 60 (940) 20 (900) G* Thread: BSP Parallel ISO 228/ (BS 2779) (DIN 259) ** Clear Top weights are shown in brackets dapa = mm H2O Q (m /h) Flow-rate capacity through the clean filter lt/h Bulkhead Mounting Bracket in black plastic (optional extra) Part No SECTION 2 ALL REPLACEMENT PARTS ARE KEPT IN SCK

3 Guidi Water Strainers WATER STRAINERS BULKHEAD MOUNTED WATER STRAINER Nickel plated Bronze body Thread: BSP Parallel ISO 228/ (BS 2779) (DIN 259) Vertical inlet & horizontal outlet AISI 6L S/S filter basket Transparent polycarbonate top Approved by R.I.N.A. - Copy certificates available Solid metal tops available to special order dapa = mm H2O Q (m /h) METAL P ORDER ONLY Flow-rate capacity through the clean filter lt/h Clear Top G*/BSP Weight** (g) C (mm) H (mm) H (mm) L (mm) L (mm) Hf (mm) Df (mm) Flow 0.Bar Flow Bar * 4" " 4" 2" 2" 2 2" " 4" 270 (000) 2600 (2870) 4000 (4550) 800 (450) 6200 (6700) 9000 (0200) 9600 (0800) G* Thread: BSP Parallel ISO 228/ (BS 2779) (DIN 259) ** Solid Top weights are shown in brackets BRACKETS For bulkhead fixing of strainers 04 S/Steel L shaped Drilled C/W S/Steel fasteners for attaching to strainer (2 brackets for strainers to ) Alternative S/S brackets available for & /8 Strainers SPARES (Only for water strainers) Strainer Metal Top Lexan Clear Top O Ring Filter Basket U Profile Cover Retainer Part No. To fit strainers P Strainers / P Strainers / P Strainers P Strainers / P P P G* Thread: BSP Parallel ISO 228/ (BS 2779) (DIN 259) SECTION 2

4 Guidi Water Strainers DECK MOUNTED WATER STRAINERS A truly well designed and engineered range of free standing strainers. Nickel plated Bronze body Neoprene O ring AISI 6L S/S filter fitted with handle for removing Lexan Polycarbonate clear top - withstands max 20 C Secured by 4 S/S bolt fixing Horizontal BSP F/Thread inlet and outlet Base lug fixing and drain plug Approved by R.I.N.A. Copy certificates available Solid metal top models available to special order GUIDI WATER STRAINERS METAL P ORDER ONLY dapa = mm H2O FULL RANGE OF SPARES SCKED Part No. G*/BSP Clear Top Weight (g) Solid Top Weight (g) d (mm) A (mm) H (mm) H (mm) L (mm) L (mm) Hf (mm) Df (mm) Flow 0. Bar Flow Bar G* Thread: BSP Parallel ISO 228/ (BS 2779) (DIN 259) Flow-rate capacity through the clean filter lt/h " 2" 4" " 4" 2" 2" 2 2" " 4" BRONZE HI-FLOW SCOOP STRAINER GUIDI BRONZE FITTINGS Designed to provide a high water flow Recommended by German Engine Manufacturers Q (m /h) ALSO AVAILABLE IN ANODISED ALUMINIUM ORDER G*/BSP SW H A F D L E B Part No " " " " " " " SECTION 2 G* Thread: BSP Parallel ISO 228/ (BS 2779) (DIN 259)

5 Material: Bronze UNI 70/8 G-CuSn5Zn5Pb5 BRONZE SKIN FITTINGS & SCOOPS GUIDI BRONZE FITTINGS This material is frequently referred to as LG2 Gunmetal Bronze Skin Fittings and Scoops Guidi have made a range of skin fittings in Bronze that can either be used on their own or with a Bronze scoop into which they fit perfectly. The skin fittings have internal lugs for securing. The scoop is held in place by 4 screws. The removable scoop is a recommendation of ISO :994 so seacocks can be cleared easier of obstructions. BRONZE SKIN FITTING G*/BSP SW H D D A F Part No. 2" " " " " " " " " SCOOP FIT SKIN FITTING G*/BSP D H B E L Part No. 2" " " " " " " " " " & 6" VERSIONS ORDER ONLY BRONZE GRATED SKIN FITTING Ideal for toilet, generator & air conditioning units. G*/BSP SW H A F D L D Part No 4" " See Section for Valves & Hose Connectors BRONZE SKIN FITTINGS BRONZE SKIN FITTINGS Traditional pattern cast in Bronze Fitted with matching backnut Both heavy duty castings with wide flange nut & anti-rotation nib up to 2" Excellent corrosion resistance We recommend for use when valves and strainers are coupled together due to their robustness. G*/BSP H D D A F Part No. 2" " " " " " " " " BRONZE SKIN FITTINGS (COMMERCIAL) Suitable for thick wooden hulls and bulkheads Cast in Bronze Fitted with external anti-rotation nibs on flange (except 5" and 6") Fitted with heavy duty back nut. * ORDER ONLY G*/BSP H D D A F Part No. 4" " " " " " " " " * 6" * G* Thread: BSP Parallel ISO 228/ (BS 2779) (DIN 259) 5

6 Guidi Brass or Chrome Skin Fittings & Grates GUIDI BRASS SKIN FITTINGS & GRATINGS BUDGET SKIN FITTINGS Budget priced skin fittings Hot stamped in Brass Supplied with L/W backnuts. Whilst valves can be fitted we would recommend the fittings below. G*/BSP H D D A F Part No. 8" " " " " " " SKIN FITTINGS These fittings are not all from same source, so material and finish varies. POPULAR SKIN FITTINGS A strong fitting shell moulded in Brass Fitted with internal securing lugs Supplied with large washer and hexagon nut * Certain sizes available with external anti rotation nib. Ask for details CHROME FITTINGS Up to 2" BSP only. Add C to part number i.e C G*/BSP H D D A F Part No. 4" " " * 4" * " * 4" * 2" " " " " G*/ Material Self Colour Chrome Plate BSP H D D A F B P /Finish Part No. Part No. 8" Brass " DZR 2-709* " DZR * " DZR 2-702* " DZR 2-708* " Brass " Bronze * = Polished Flange Full Scoop GRATINGS Shell moulded in Brass 4 c/sk hole fixing Thickness approx. 4mm For Skin Full Grate Scoop Grate Fittings H L F D D Part No. Part No. 8" " - 4" " - 4" " - 2" " RECTANGULAR SCOOP GRATING Cast in Brass Thickness 6mm VENT/DRAIN Chromed brass c/w back nut For Skin Rectangular Fittings A H L E B Part No. 2 2" " " Part No A B C D E F G H 2mm 8" BSP mm 9.5mm 20mm 8mm mm 24mm is oval 6 SECTION 2 G* Thread: BSP Parallel ISO 228/ (BS 2779) (DIN 259)

7 Guidi Brass Seawater Strainers & Bonding Ring GUIDI BRASS SEAWATER STRAINERS & BONDING RING SCOOP STRAINER Water inlet with integral scoop and slotted strainer Supplied with hexagon nut and large washer Shell moulded in Brass G*/BSP H A D E F L B Part No. 8" " " " " " " GRATED SKIN FITTING With full length slots to stop scoop effect Shell moulded in Brass Supplied with hexagon nut and large washer Applications: Inlets for toilets, air conditioning units, generators, etc. G*/BSP H A D E F L B Part No. 2" " " " HIGH PERFORMANCE SCOOP STRAINER The wedge shape scoops more water which with high speed powerboat engines is necessary Alignment is easy with front fastener hole Shell moulded in Brass Supplied with large washer and hexagon nut G*/BSP H A D E F L B Part No. 2" " " " " " HI-FLOW SCOOP STRAINER Designed in co-operation with the UK s leading powerboat builders to provide a high water flow Shell moulded in Brass G*/BSP H A D E F L B Part No. 2 2" " " BRASS BONDING RING WITH CABLE CONNECTION Suitable for use with 6.4mm ring terminals For ring terminals & cable see Section 8 Size H A B F D Part No 4" " " " " " " " G* Thread: BSP Parallel ISO 228/ (BS 2779) (DIN 259) SECTION 2 7

8 Guidi Bronze Flanges, Flanged Strainers & Valves GUIDI BRONZE FITTINGS PN6 FLANGE WITH FEMALE OR MALE THREAD Bronze 6 Bar G** Thread: BSP Taper ISO 7/ (BS2) FEMALE WITH 4 OR 8 HOLES G** Holes L d C F DN Part No. 4" " " " * " " " * 6" * MALE WITH 4 OR 8 HOLES GASKETS SUIT AVAILABLE ORDER G** Holes L L d C F DN Part No. 4" * 2" * 2" * 2 2" * " * 4" * 5" * 6" * * ORDER ONLY LARGE FLANGED BRONZE VALVES FULL SPECIFICATION AVAILABLE ON REQUEST GATE VALVES Range HEAVY DUTY BRONZE FLANGED SEAWATER STRAINERS FULL SPECIFICATION AVAILABLE ON REQUEST. ALSO AVAILABLE IN ANODISED ALUMINIUM. VERTICAL INTAKE 6" Bore DN50 90º Part No BALL VALVES Range HORIZONTAL INTAKE 6" Bore DN50 Part No SECTION 2 SAFETY INTAKE NON-STICK VALVES Flanged and threaded versions available Range DOUBLE INTAKE VALVES Flanged and threaded versions available Range BLAKES POPULAR PLUS SEACOCK The Blakes Seacock is designed for marine use. A proven design with an international reputation. BLAKES SEACOCK GREASE Synthetic, good adhesion and water resistant. Weight approx 500g Part No Stainless steel grease nipple for in water maintenance Positive on / off handle Left or right hand operation Suitable for GRP, steel, wood & ferrocement hulls Available in 4" and 2" hose sizes Complete with fixing bolts ( 4" has strainer plate) Seacock material: DZR Brass (Lloyds approved) Specification: Outlet: 4" (9mm) 2"(8mm) Seacock Material: DZR DZR Bolt Material: Bronze Bronze Nut material (for bolt): DZR locknut or Bronze OA height: 94mm 8mm OA width (inc lever): 47mm 20mm Max hull thickness: 7mm 6mm Flange dia.: 8mm 95mm Hole (.4) centres: 6mm 7mm Part No G* Thread: BSP Parallel ISO 228/ (BS 2779) (DIN 259)

9 P QUALITY BRITISH MADE ANODES AT VERY COMPETITIVE PRICES PIRANHA BOLT ON STRAIGHT ANODE FOR SEAWATER APPLICATIONS Material: Zinc Aluminium* Weight: 4kg.7kg Part No A Backing pad Part No.: Material: Zinc Weight: 7kg Part No Backing pad Part No: Material: Zinc Aluminium* Weight: 2kg 5kg Part No A Backing pad Part No: PIRANHA BOLT ON PEAR ANODE FOR SEAWATER APPLICATIONS Material: Zinc Weight: 2.kg Part No Material: Aluminium* Weight: kg Part No A Backing pad Part no ZINC AND ALUMINIUM ANODES Specifications: Piranha Zinc Anodes Magnesium Anodes Zinc Anodes - MIL-800 Aluminium Anodes - MIL-A Magnesium Anodes - Magnesium Alloy high purity BS: HG6 PIRANHA DISC ANODES FOR SEAWATER APPLICATIONS Material: Zinc Size: 70mm Weight: 0.5kg Part No Material: Zinc Aluminium* Size: 00mm 00mm Weight: kg 0.4kg Part No A Backing Pad Part no Material: Zinc Aluminium* Size: 50mm 50mm Weight: 2.2kg 0.8kg Part No A Backing Pad Part no & & PIRANHA WELD-ON ANODE FOR HULL PROTECTION ON STEEL BOATS IN SEAWATER, BRACKISH WATER & FRESHWATER Material: Zinc Weight: 8.5kg Part No Material: Aluminium* Weight: 4kg Part No A *Piranha Aluminium Anodes Available Soon MAGNESIUM ANODES MAGNESIUM ANODES (BOLT ON) FOR FRESH WATER APPLICATIONS Please Note: Magnesium anodes are lighter size for size than the equivalent shaped in zinc, however the same backing pads may be used. Part No. Description Weight N-0005 M56 Button Anode 0.28kg N Pear Anode 0.68kg N-0004 Hull Anode.0kg MAGNESIUM ANODES (WELD ON) FOR FRESH WATER APPLICATIONS N-0005 N N-0004 Part No. Description Weight N x 90 x 45mm.5kg N x 50 x 5mm 2.5kg N x 5 x 75mm 4.0kg SECTION 2 9

10 Performance Metals Aluminium Anodes ANODES THE ONLY ANODES WITH THE WEAR INDICAR Performance Metals Aluminium Anodes feature patent pending Wear Indicator which tell the boater when it s time to change. This plastic indicator is embedded in the anode and appears in the surface of the anode when it wears. Aluminium/Indium alloy is more active so it gives better protection Essential for Mercury sterndrives - Zinc will not provide the correct protection Recommended for both salt and freshwater on Mercury sterndrives Last up to 50% longer than zinc anodes Aluminum anodes self-clean in freshwater - Zinc anodes form a coating that stops them working within a few months Environmentally friendly Mounting hardware included Attractively packaged with clear information to aid with selection and installation - reducing the need for trained store staff Alloy meets military specification MIL-A (SH) SACRIFICIAL ANODE MATERIALS - COMPARISON Zinc Aluminium Magnesium Voltage (in seawater) -.0V -.V -.5V Relative Life (zinc = 00 same size) Relative Density (zinc = 00) Military Specification MIL-A-800 MIL-A MIL-A A A A A HULL & STRAINER ANODES Description Dimensions Part No. Mini Driver 52 x 02 x A Driver 05 x 52 x A Hull Plate 220 x 08 x A Hull Plate 25 x 86 x A Doka Strainer 8 x 2 x A Bosler Strainer A Bennett Trim Tab Kit A Hull Plate 20 x 50 x A Hull Plate 25 x 86 x A Hull Plate 60 x 70 x A Hull Plate 90 x 70 x A Hull Plate 46 x 64 x A Hull Plate 60 x 70 x A Hull Plate 20 x 02 x A Transom Fin 2.6kg 05 x 5 x A BOLT-ON PEAR ANODE A A LxWxH: 250 x 88 x 4mm Part No A VOLVO ANODES & KITS WHICH ANODE MATERIAL? with "Red Spot Wear Indicator Inboard Outdrive Hull Material Wood Fibreglass Aluminium Steel All Freshwater Alum Alum/Mag Alum Alum/Mag Alum/Mag (Pure) Freshwater Alum Alum Alum Alum Alum (Polluted) Brackish Alum/Zinc Alum/Zinc Alum/Zinc Alum/Zinc Alum Salt Alum/Zinc Alum/Zinc Alum/Zinc Alum/Zinc Alum Anodes Item Series Part No. Collar A Collar A Collar 250/270/ A Collar A Collar A Collar A Bar 280 Duo Prop A Bar Duo Prop A Plate 290 Duo Prop A Plate S Drive A Plate DPX A Plate Penta A A A A A Kits Description Part No. 280 Kit A 280 Duo Prop Kit A 290 Kit A 290 Duo Prop Kit A SX Kit A A A A A A A A FLANGE ANODES Description Dia. Part No. Flange 48mm A Flange 72mm 2-600A Flange 95mm A Flange 27mm A Supplied as a pair with single bolt through fixing. 0 SECTION 2

11 Performance Metals Aluminium Anodes ANODES A 2-606A A A A A A A A A MERCRUISER ANODES Description Part No. Kit Verado A Kit Bravo Prop A Prop Nut Anode Bravo 2-606A Trim Tab Flat A Engine Fin Trim A Engine G.H. Block Plate A Engine Nut A Cavitation Plate Alpha A Engine Cavitation Plate Bravo A 40/60 HP A Drive Trim Cyl Mercruiser Alpha A Drive Trim Cyl Mercruiser Bravo A Bearing Carrier Mercruiser Alpha A Trim Fin Flat Mercruiser Bravo A Plate Anode A Bearing Carrier Mercruiser Bravo A COMPLETE MERCURY OUTDRIVE KITS A A A A A A A A COLLAR ANODES Item Shaft Part No. Collar 4" A Collar 7 8" A Collar " A Collar 8" A Collar 4" A SHAFT ANODES Item Size Part No. Shaft 4" A Shaft 7 8" A Shaft 25mm A Shaft " A Shaft 8" A Shaft 0mm A Shaft 4" A Shaft 5mm A Shaft 2" A Shaft 40mm 2-605A Shaft 4" A Shaft 50mm 2-605A Shaft 2" A Shaft 2 4" A Shaft 2 2" A A A A Description Part No. Drive Kit Alpha Gen A Drive Kit Alpha Gen A Drive Kit Bravo A Drive Kit Bravo 2 & (to 200) A Drive Kit Bravo New A Alloy meets military specification MIL-A (SH) SECTION 2

12 Zinc Anodes ZINC ANODES ZINC ANODES FOR FLANGE Part No: Ø Ø Ø2 h kg ZINC HULL ANODES (Bolt Through) Part No: l w h i kg Ø Ø x x x x25 ZINC HULL ANODES (Weld On) Part No: l w h OV Strap kg x25x x25x x25x x25x5.0 ZINC PEAR SHAPED ANODES Part No: l w h i Strap kg Type x25x5.0 Bolt on x25x5.8 Bolt on x25x5.0 Bolt on x25x5 2. Bolt on x25x5.0 Weld on x25x5.8 Weld on x25x5.0 Weld on SINGLE ANODE FIXING SETS M5 Shaft Anode Fixing Screw M6 Shaft Anode Fixing Screw mm Fixing Bolt Complete mm Fixing Bolt Complete mm Weld-on Fixing Stud Set mm Weld-on Fixing Stud Set ZINC CONE NUT ANODE "W ø8 h "W ø52 h80 Other sizes available on request ZINC SHAFT ANODE Part No. ØID mm mm ( 7 8") mm mm (") mm ( 8") mm mm ( 4") mm ( 8") mm ( 2") mm 2-605M 44.4mm ( 4") mm mm mm (2") mm (2 4") mm (2 2") ZINC HANGING ANODE Ø Ø h kg Cable 4.5m Part No FAIRLINE BOLT-ON ANODES Part No. Size (LxWxH) kg E 20 x 65 x E 0 x 75 x E 455 x 90 x MAX PROP DOME ANODE Part No. Ø h ØID ZINC COLLAR ANODE Part No. ØID mm ( 4") mm ( 7 8") mm mm (") mm ( 8") mm mm ( 4") 2 SECTION 2

13 Shaft & Suzuki Zinc Anodes E E S SHAFT ANODES ZINC SHAFT ANODES (BENETEAU) Tapered - Fit Beneteau, or Hexagonal end Tapered Hexagon Part No: Part No: Ø axis Ø Ø2 Ø Hex. h kg E E E E E E E E SUZUKI ANODES 2 Zinc Hexagonal end with Brass Part No: Ø axis Ø Ø h h C kg E x Zinc Tapered Sole Anode Part No: Ø Ø h kg S Suzuki HP 0.50kg Suzuki 55-65HP 0.70kg ENGINE CONIC Suzuki F.B kg ENGINE CUBE Suzuki F.B. 0.45kg Suzuki 65-5 HP 0.080kg ENGINE RING Suzuki F.B. 20Ø 0.00kg Suzuki 9.9-5HP 0.055kg Suzuki HP 0.70kg Suzuki HP 0.080kg Suzuki 5 HP 0.0kg Suzuki 2 HP 0.050kg FOR PENCIL ANODES SEE PAGE 4 SECTION 2

14 Volvo Penta Zinc Anodes VOLVO PENTA ANODES ENGINE COLLAR kg 5 ENGINE COLLAR kg ENGINE COLLAR /270/ kg ENGINE COLLAR Volvo kg ENGINE COLLAR Volvo 290 Duo Prop 0.550kg 9 0 ENGINE COLLAR R Volvo 280/290 Duo Prop (reduced depth)* 0.500kg ENGINE COLLAR Volvo 0 S.Drive 0.875kg ENGINE COLLAR Volvo 20 S.Drive 0.520kg 2 ENGINE BAR Volvo 250/270/ kg ENGINE BAR Volvo 290 Duo-Prop 0.790kg ENGINE SQUARE Volvo Trim kg (pair) Volvo kg Volvo S. Drive 0.60kg 4 SECTION Volvo F.B kg *compatible with both the old type hub propellers and new type deep hub propellers Volvo Duo 0.0kg Volvo S. Drive.090kg MAGNESIUM = FRESHWATER ZINC = SEAWATER

15 VOLVO PENTA ANODES Volvo Penta & Honda Zinc Anodes SHAFT NUT Ø Axis 25/ kg SHAFT NUT Ø Axis kg SHAFT NUT Ø Axis kg DPX 0.70kg DPX 0.20kg DPX 0.695kg kg PROPELLER COLLAR kg BOW THRUSTER PLATE kg BOW THRUSTER CONE kg CAVITATION PLATE kg SAIL DRIVE kg GIMBAL PLATE kg HONDA ANODES ENGINE RING Honda 8 HP 0.05kg Honda F.B kg Honda 0.085kg Honda 0.275kg Honda 0.80kg FOR PENCIL ANODES SEE PAGE 4 SECTION 2 5

16 Mercury Mercruiser Zinc Anodes MERCURY - MERCRUISER ANODES Mercury 50 HP 7/6" unc 0.490kg Mercruiser HP 7/6" unc 0.620kg Mercury 25 HP 0.275kg Mercury 20 HP 5/6" unc 0.0kg Mercury HP 7/6" unc 0.95kg Mercury 25 HP/50/60/75 Mercruiser E.B. 90/ kg Mercury F.B. - Mercruiser E.B kg ENGINE NUT Mercruiser E.B. /2" unc 0.20kg Dim: 64x64x0mm 0.265kg Mercury HP since kg S Mercury HP 0.05kg S Mercury HP 0.050kg FIN ANODE America 25 HP M8 0.50kg ENGINE RING Mercury- Nissan- Tohatsu 4.5 HP 0.00kg Alpha One 0.900kg Bravo One.05kg 6 SECTION 2 MAGNESIUM = FRESHWATER ZINC = SEAWATER

17 MERCURY - MERCRUISER ANODES Mercury Mercruiser & BMW Zinc Anodes Mercury 40/60 HP 0.580kg TRIM COLLAR Mercruiser Alpha 0.20kg TRIM COLLAR Mercruiser Bravo 0.25kg ENGINE COLLAR Mercruiser Alpha One 0.240kg Mercury Alpha 0.20kg /200 HP.90kg /40 HP 0.00kg ENGINE RING Ø 7Ø 7h 0.00kg ENGINE RING Ø 6.5Ø 6.5h 0.020kg HP - XR kg Ø 0.0kg Formula 60 HP 0.50kg ENGINE COLLAR Bravo One 0.70kg kg /6" unc 0.750kg ENGINE BAR I 8Ø 0.05kg BMW ANODES 2 2 ENGINE COLLAR BMW Mark 0.875kg LONG BMW Mark 2 /8"unc 0.625kg BMW 00 Mark 0.20kg BMW Mark kg FOR PENCIL ANODES SEE PAGE 4 SECTION 2 7

18 OMC, Johnson, Evinrude Zinc Anodes OMC - JOHNSON - EVINRUDE ANODES TRANSOM OMC P 0.475kg OMC M HP 0.575kg OMC G HP 0.985kg FRONT GEAR CASE OMC Cobra.00kg OMC Cobra 0-85 HP.275kg OMC E.B.- F.B HP 0.460kg 9 0 GEAR CASE OMC 90HP 0.75kg ENGINE CUBE OMC HP Johnson Evinrude HP kg OMC HP Johnson HP Evinrude HP 0.820kg OMC HP Johnson HP Evinrude HP 0.700kg ENGINE CUBE Johnson/Evinrude HP(V4-V6) 0.0kg ENGINE CUBE OMC Cobra 0.55kg Johnson 2-50 HP 0.075kg Johnson HP Evinrude HP 0.075kg Johnson HP 99 Evinrude HP kg ENGINE COLLAR Johnson kg 8 SECTION 2 MAGNESIUM = FRESHWATER ZINC = SEAWATER

19 OMC, Johnson, Evinrude, Tohatsu, Yanmar & Bukh Zinc Anodes OMC - JOHNSON - EVINRUDE ANODES OMC Cobra bassa 0.800kg Johnson - Evinrude Diabolo HP 0.00kg BAR Johnson 60/75 HP Evinrude 60/75 HP 0.885kg OMC Cobra 0.605kg OMC Cobra kg Johnson 8-9, 9-5 HP 0.055kg King Cobra.090kg HATSU ANODES HP 0.540kg ENGINE RING HP 20 Ø 0.00kg ENGINE RING /8, 5 maxi, corsa 24 Ø 0.020kg maxi corsa HP 0.20kg mega HP 0.50kg HP HP 0.475kg HP HP 0.45kg YANMAR ANODES ENGINE CUBE Mega 0.040kg BUKH ANODE ENGINE RING Yanmar HP 0.20kg Yanmar 0.90kg ENGINE COLLAR Yanmar 0.80kg ENGINE COLLAR Bukh Sail Drive 0.885kg FOR PENCIL ANODES SEE PAGE 4 SECTION 2 9

20 Mariner Yamaha Zinc Anodes MARINER - YAMAHA ANODES Mariner 0-50 HP Yamaha HP 0.290kg 2-60 Mariner HP Yamaha 55 HP 0.490kg Mariner HP 7/6" unc 0.620kg Yamaha HP (V4-V6) 0x kg Yamaha HP 0x kg ENGINE CUBE Yamaha HP 0.45kg Yamaha 9.9 HP 0.045kg Mariner HP 0.05kg Yamaha 6-8 HP 0.07kg ENGINE RING Mariner/Yamaha 2-25 HP 0.020kg ENGINE RING 2-60 Yamaha HP 0.040kg ENGINE RING 2-6 Marine 40HP Yamaha 70-85HP 0.20kg ENGINE BAR 2-62 Yamaha HP 0.950kg ENGINE BAR 2-6 Yamaha HP 0.520kg ENGINE BAR 2-65 Yamaha P kg 2-66 Yamaha HP 0.40kg 20 SECTION 2 MAGNESIUM = FRESHWATER ZINC = SEAWATER

21 Mariner Yamaha Zinc Anodes MARINER - YAMAHA ANODES Yamaha Malta.5 HP 0.065kg 2-68 Yamaha 6C - 6D - 8C 0.90kg 2-69 Yamaha kg Yamaha kg Mariner H25 - H8 Yamaha W0-W kg Yamaha V8.440kg 2-62 Yamaha FB 0.00kg Yamaha V kg / 200 HP.90kg / 40 HP 0.00kg ENGINE RING Ø 7h 6.5Ø 0.05kg ENGINE RING Ø 6.5h 6.5Ø 0.020kg HP - XR kg 2-60 Yamaha 25-0 HP 0.275kg 2-6 c.f kg CUBE WITH HOLE kg Yamaha 220 HP DX 0.625kg 2-64 Yamaha 220 HP SX 0.625kg T 0.265kg HP 4T 0.085kg HP 0.225kg FOR PENCIL ANODES SEE PAGE 4 SECTION 2 2

22 Zinc Pencil Anodes & CEF Impellers ZINC PENCIL ANODES CEF IMPELLERS A C B D Engine Anode Anode Thread Thread Threaded Manufacturer Series Part No. Dia. Length Dia. Length Plug (A)mm (B)mm (C) (D)mm P/ No. General " UNC TP Motors " UNC TP " UNC TP " UNC TP Caterpillar* " UNC TP " UNF " UNC TP " UNC " UNC TP " UNC TP " UNF TP Onan MA M8 9 Cummins* " UNC MA mm TP Bukh M TP V.M M TP M TP Ford mm TP Nanni Mercedes mm TP Boudouin x TP Volvo Penta 200/250/ " UNC T " UNC (TPM/TPF) " UNC " UNC TP BMW " UNC Yamaha M8 Yanmar* 8-0 HP M8 8-2 HP M M8 = Part No.s in red are to order only * Other Zinc Pencil Anodes for these engine manufacturers may be available to special order. Contact our sales office as minimum purchase quantities may apply. SELVA OUTBOARD ENGINE IMPELLERS Application Aquafax Part No. OE No. 6 HP 20/0 ONLY HP HP Twin Cyl 972 on HP 98 on hp 700 series 972 on HONDA OUTBOARD ENGINE IMPELLERS Application Aquafax Part No. OE No. 5 HP A0 5 HP BF A0 5 HP BF5A A0 7.5 HP BF A0 8/0 HP ZV9-00 8/0 HP ZV9-A 8 HP A0 8 HP ZV HP BF ZV HP ZV HP BF ZV4-0 5 HP ZV HP ZV HP ZV HP ZV HP ZV HP ZV HP ZV HP ZV HP ZW HP ZW-B02 90 HP ZW HP ZW-B02 0 HP BF A0 5 HP ZW-B02 0 HP ZW-B02 75/225 HP ZY-00 HATSU OUTBOARD ENGINE IMPELLERS Application Aquafax Part No. OE No HP 2 & 4 stroke ,8 HP 2 Stroke B ,9-5-8 HP 2 Stroke HP 4 Stroke HP 2 Stroke HP 2 Stroke C HP 2 Stroke C B HP 2 Stroke C B SECTION 2

23 CEF Outboard Impellers CEF IMPELLERS MARINER OUTBOARD ENGINE IMPELLERS Application Aquafax Part No. OE No. 4A HP (M-6EO-000>) M 4A HP (ML-6EO-000>) M 5C HP (M-6E-025>) M 5C HP (ML-6E-4000>) M 8B HP (M >) M 8B HP (ML >) M 40 HP (4 Cyl) 4 Stroke T 40 HP EFI 4 Stroke T 40 HP JET T 45 HP JET T 50 HP (4 Cyl) 4 Stroke T 50 HP (5560>) HP EFI 4 Stroke T 55 HP ( Cyl) T 60 HP ( Cyl) T 60 HP (4 Cyl) 4 Stroke T 60 HP EFI 4 Stroke T 70 HP ( ) HP (A99642>) T2 70 HP (B24045>) T2 75 HP (4 Cyl) (64290>) 2-50 () HP (A99642>) T2 75 HP (B2405>) T2 75 HP (C D8222) T YAMAHA OUTBOARD ENGINE IMPELLERS Application Aquafax Part No. OE No. 2 HP ( ) HP MALTA (990 - >) L HP (985-89) E HP (999 >>) 4 Stroke E HP (985) E HP (non domestic) HP 4 Stroke T HP (non domestic) /9.9 HP (999 >>) 4 Stroke HP (985-99) HP (985) HP (987-88) HP (999 >>) 4 Stroke V HP ( ) HP (990-99) HP (999 >>) 4 Stroke () 6H HP ( ) HP (989) VDE HP (99) () comes complete with gasket Application Aquafax Part No. OE No. 80 HP (4 Cyl) ( ) 2-50 () HP (4 Cyl) ( ) 2-50 () HP (6 Cyl) (50995-) 2-50 () HP (A99642>) T2 90 HP (B24045>) T2 90 HP (C222000>) T2 00 HP (B209468>) T2 5 HP (6 Cyl) ( ) 2-50 () HP (C00000-D2822) T2 40 HP (6 Cyl) ( ) 2-50 () A HP (<M >) M 5A HP (<ML >) M MAG II (B ) 2-50 () MAG II (B ) 2-50 () V-5 HP (0A ) 2-50 () V-50 HP ( A904645) 2-50 () V-50 HP (A904646) 2-50 () V-75 HP ( ) 2-50 () V-75 HP (66875-) 2-50 () V-200 HP ( ) 2-50 () V-200 HP ( ) 2-50 () V-220 HP (B76-) 2-50 () Application Aquafax Part No. OE No. 40 HP ( ) () 6H HP ( ) F /50 HP (999 >>) 4 Stroke H HP (985-99) H HP (989-99) /8 HP (99 >) 2 cyl G /00 HP (999 >) 4 Stroke F E HP ( ) HP (985-99) HP ( ) E HP (99-994) E HP ( ) E HP (99-994) E HP (984-99) E HP ( ) E HP (984-99) E HP ( ) E /25 N (99 >) 2 cyl L HP ( ) E HP (99-994) E HP (990-99) E HP (992-94) E HP ( ) E SECTION 2 2

24 CEF Outboard Impellers MERCURY OUTBOARD ENGINE IMPELLERS Application Aquafax Part No. OE No. 2.4 EFI HP (all) 2-50 () HP (62027>) HP ( >) HP ( ) HP ( ) HP (559552>) HP ( >) HP (559552>) /5/6 HP 4 Stroke HP (all) HP (all) HP ( ) HP ( ) HP ( ) HP ( >) HP 4 Stroke HP ( ) HP ( ) HP ( >) /5 HP 4 Stroke HP ( ) HP ( ) 2-50 () XD HP (64497>) /40/50 HP (522005) 4 Stroke XD HP (64497>) HP ( ) HP ( ) HP ( B0788) HP ( ) CEF IMPELLERS Application Aquafax Part No. OE No. 40 HP ( ) HP ( ) HP ( ) HP (4Cyl) 4 Stroke T 40 HP EFI 4 Stroke T 40 HP JET T 45 HP ( ) HP ( ) HP (5560>) HP JET T 50 HP ( ) HP ( ) HP ( ) HP ( ) HP ( >) HP (4Cyl) 4 Stroke T 50 HP EFI 4 Stroke T 55 HP (Cyl) T 60 HP (Cyl) T 60 HP (4Cyl) 4 Stroke T 60 HP ( >) HP ( ) 2-50 () HP ( ) 2-50 () HP ( ) HP ( ) 2-50 () HP ( ) HP ( ) HP (A99642 >) T2 70 HP (B24045 >) T2 75 HP (4Cyl.) (64290 >) 2-50 () HP (C D2822) T HP 4T T2 24 SECTION 2 () comes complete with gasket

25 Application Aquafax Part No. OE No. 80 HP ( ) 2-50 () HP ( ) 2-50 () HP ( ) 2-50 () HP ( ) 2-50 () HP (A99642 >) T2 80 HP (B24045 >) T2 80 HP EFI 4 Stroke T 85 EL HP ( ) 2-50 () HP ( ) 2-50 () HP ( ) 2-50 () XS HP ( ) 2-50 () HP ( ) 2-50 () HP (6Cyl.) ( ) 2-50 () HP (A99642 >) T2 90 HP (B24045 >) T2 90 HP (C D2822) T2 95 HP ( ) 2-50 () HP ( ) 2-50 () HP ( ) 2-50 () HP ( ) 2-50 () HP (B D2822) T2 0 HP ( ) 2-50 () HP ( ) 2-50 () HP (C00000-D2822) T2 25 HP ( ) 2-50 () HP ( ) 2-50 () HP (A ) 2-50 () HP ( ) 2-50 () HP ( ) 2-50 () HP ( ) 2-50 () HP ( A904645) 2-50 () HP (A ) 2-50 () HP ( ) 2-50 () HP ( ) 2-50 () HP ( ) 2-50 () HP ( ) 2-50 () HP (B76 -) 2-50 () CEF IMPELLERS CEF Outboard Impellers Application Aquafax Part No. OE No. 225 HP ( ) 2-50 () MK5A (all) MK5/MK6 (all) mod.vp HP (all) 2-50 () WH6/WH6A (all) XR/4 HP (B ) 2-50 () SUZUKI OUTBOARD ENGINE IMPELLERS Application Aquafax Part No. OE No. 9.9/5 CV /8CV /225/280 HP 4 Stroke J00 90/5 HP 4 Stroke DF60/DF70 (998->>) 4 Stroke E E0 DT8 (200->>) DT20 (986-88) () DT20VE-25QD-25VE () VE-0QD-40VE DT25 (984-88) () DT25C (989-95) () DT0 (984-87) () DT0C (988-95) () DT5 (987-89) () DT40C (984-95) () DT40VZ-DT40QD-DT50C DT50D-DT50VZ DT50QD-DT65VZ DT60QD-DT65QD DT50VE-DT60VE-DT75VE DT85VE-DT85Q-D-DT85VZ DT55 (985-95) DT65 (985-95) DT75 (985-95) DT85 (985-95) DT90/DT00 (990->>) 2 Stroke E E E FORCE OUTBOARD ENGINE IMPELLERS Application Aquafax Part No. OE No HP F /20 HP - F5 50 HP - 5 Cyl (88>) 2-50 () 47-F () comes complete with gasket SECTION 2 25

26 CEF Outboard Impellers EVINRUDE JOHNSON OUTBOARD ENGINE IMPELLERS Application Aquafax Part No. OE No. /2, 2 HP ( ) /2, 2 HP ( ) L Seadrives (982 >) L Seadrives ( ) (except 987 counter rotation models) HP ( ) HP (979>) HP ( ) HP (Comm) ( ) C HP (984>) HP JET ( ) HP (986>) HP (986-99) HP ( ) HP (97-994) HP ( ) V models only HP (25") (977) HP (985>) except 25" & 0" models HP ( ) except 25" & 0" models HP (97-972) HP ( ) except 25" & 0" models HP ( ) except 25" & 0" models HP (97-996) HP ( ) HP (979>) except 25" & 0" models HP ( ) except 25" & 0" models HP (956-97) HP ( ) HP (98-989) HP (990>) HP ( ) HP (979>) except 25" & 0" models HP ( ) except 25" & 0" models HP (984-) except 25" & 0" models HP (984>) except 25" & 0" models HP ( ) HP (979>) except 25" & 0" models CEF IMPELLERS Application Aquafax Part No. OE No. 75 HP ( ) except 25" & 0" models HP (956-97) HP (984>) except 25" & 0" models HP ( ) except 25" & 0" models L HP Seadrive ( ) L Seadrive (982 >) (except counter rotation) HP ( ) HP ( ) HP ( ) HP ( ) HP (979>) except 25" & 0" models HP ( ) except 25" & 0" models HP (986>) except 25" & 0" models HP ( ) except 25" & 0" models HP ( ) HP (979>) except 25" & 0" models HP ( ) HP ( ) HP ( ) HP ( ) HP (Comm) ( ) HP (old model) ,5 (cyl) ( ) HP (99-995) except 25" & 0" models HP (985-) except 25" & 0" models HP (985>) except 25" & 0" models ,4 (Comm) ( ) HP ( ) HP ( ) ,5 ( ) ,5 (2 cyl) (98>) /.6L HP (985>) except 25" & 0" models /.6L HP ( ) except 25" & 0" models ( ) ( ) HP ( ) HP W/Thermostart ( ) HP (0 Gearcase) (97-98) HP ( ) Weedless Drive HP (90º) (97-980) HP (90º) (98-990) HP (90º) Gearcase (97-975) HP ( ) HP ( ) HP ( ) SECTION 2 SHERWOOD INBOARD ENGINE IMPELLERS AVAILABLE ON APPLICATION

27 Application Aquafax Part No. OE No. 40 HP ( ) HP comm (98-990) HP comm (RP,RW) (99-994) HP comm (RP,RW) ( ) HP comm (RS) ( ) ,48,50 HP ( ) /55 HP comm ( ) /55 HP comm ( ) HP ( ) HP ( ) HP ( ) HP ( ) HP (97-975) HP ( ) HP ( ) HP ( ) HP (97-978) HP (998>) 4 Stroke HP ( ) HP (979) ,65 comm, 70 ( ) HP ( ) HP ( ) SST HP (989) HP comm ( ) , 5-7 HP and 4 Delux (980) HP ( ) ,9.9,5 HP 4 Stroke HP JET (99-996) HP (97-98) HP (25") (97-98) HP TTL (99-995) HP (987-99) HP ( ) HP (974>) HP ( ) HP ( ) V models only CEF IMPELLERS CEF Outboard & Stern Impellers OMC OUTBOARD & STERN DRIVE ENGINE IMPELLERS Application Aquafax Part No. OE No. 2, 2 HP ( ) L/4.L/5.0L (all clutch) HP (90 ) Gearcase (97-975) L/.0L (dog cobra) L (except 2.) HP (964-97) HP (958-96) HP (95-957) HP (962-97) HP (976-77) HP commercial (98-990) CV (995>) , /00 HP ( ) ( ) HP ( ) HP (97-972) Sail Drive Cobra.0 U/G /4.L - 5.0L MERCRUISER STERN DRIVE ENGINE IMPELLERS Application Aquafax Part No. OE No. 8.S HO A2 8.S Horizon A2 496 MAG (Base Model) A2 496 MAG (H.O. Model) A2 Bravo I/II (all) Gen II alpha (all) T2 I & alpha I ( D469859) I ( ) I ( ) MC ( ) ( ) MC ( ) ( ) MC /R Alpha ( ) ( ) MR Alpha (68549-D ( ) () comes complete with gasket SECTION 2 27

28 Shaft Bearings WATER LUBRICATED BEARINGS Approved by Lloyds Precision ground inside and outside Large range of sizes kept in stock Alternative sizes available to special order Nitrile Liner (or polyurethane as available): Outstanding abrasion resistance Excellent for water lubrication Good noise damping More tolerant of misalignment Allow greater deflection Shell: Brass Shell (standard naval brass) - tough and durable. Phenolic Shell (laminated plastic) - designed to fit in aluminium or steel hulls. W.M. SERIES Part Shaft Shell Length Number dia. A dia. B C mm 4mm 60mm 2-29 " 4mm 60mm = Part No.s in red are to order only WATER LUBRICATED BEARINGS Standard Mixed Metric/Inch Series A B C D Shaft Outside Standard Approx.Metal Diameter Diameter Length Thickness (mm) (mm) 20 8" " " " " " " " " " " " " " " " " Standard Metric Series A B C D Shaft Outside Standard Approx.Metal Diameter Diameter Length Thickness (mm) (mm) (mm) Brass Shell Brass Shell THESE SIZES ORDER ONLY Nitrile Liner Phenolic Shell Nitrile Liner Phenolic Shell 28 SECTION 2

29 Shaft Bearings Standard Inch Series A Shaft Diameter B Outside Diameter C Standard Length D Approx. Metal Thickness Brass Shell 4" 4" " 0." " 4" 2" 0." " 8" 2" 0.09" " 2" 2" 0.09" " 4" 4" 0.06" " 8" 4" 0.09" " 2" 4" 0.09" " 5 8" 4" 0.09" " 2" 4" 0.09" " 2" 4 2" 0.06" " 5 8" 4 2" 0.06" " 4" 4 2" 0.06" " 2" 4 2" 0.06" " 5 8" 5" 0.06" " 4" 5" 0.09" " 2" 5" 0.09" " 2 8" 5" 0." " 7 8" 5 2" 0.09" " 2" 5 2" 0.09" " 2 8" 5 2" 0." " 2 8" 5 2" 0." " 2" 6" 0.09" " 2 8" 6" 0." " 2 8" 6 2" 0." " 2 5 8" 6 2" 0." " 2 8" 7" 0." " 2 5 8" 7" 0." " 2 5 8" 7 2" 0." " 2 5 6" 7 2" 0." " 2 5 8" 8" 0." " 2 4" 8" 0." " " 8" 0." " 2 4" 8 2" 0." " 2 5 6" 8 2" 0." " 8" 8 2" 0." " 2 5 6" 9" 0." " " 9" 0." " 8" 9" 0." " 8" 9" 0.6" " " 9 2" 0." " 8" 9 2" 0." " 8" 9 2" 0.6" " " 0" 0." " 8" 0" 0." " 4" 0" 0.6" " 8" 0" 0.6" " 2" 0" 0." " 8" " 0.6" " 2" " 0." " 4" " 0.6" " 4" 2" 0.9" " 4" " 0.9" WATER LUBRICATED BEARINGS Nitrile Liner Phenolic Shell A Shaft Diameter B Outside Diameter C Standard Length Approx. Metal Thickness D 2 5 8" 8" 0 2" 0.6" " 2" 0 2" 0." " 2" 2" 0." " 4" 2" 0.6" 2-54 " 4" 2" 0.6" " 4 4" 2 2" 0.9" " 4 4" " 0.9" " 4 8" 2" 0.7" " 4 2" 2" 0.5" 2-6 2" 4 4" 4" 0.9" " 4 2" 4" 0.5" " 4 2" 4 2" 0.5" " 4 2" 5" 0.5" " 5" 5" 0.9" " 5 4" 5" 0.2" " 5 4" 5 2" 0.2" " 5" 6" 0.5" " 5 4" 6" 0.2" " 5 4" 6 2" 0.2" " 5 4" 7" 0.2" " 5 2" 7" 0.9" " 5 4" 7 2" 0.25" " 5 2" 8" 0.9" " 5 5 8" 8" 0.25" " 5 4" 8" 0.25" " 6 8" 8 2" 0.25" " 6" 9" 0.25" " 6 8" 9" 0.25" " 6 8" 9 2" 0.25" 2-8 5" 6 8" 20" 0.25" " 6 4" 20" 0.2" 2-8 5" 6 2" 20" 0.25" " 6 4" 2" 0.28" " 7" 2" 0.25" " 6 4" 2 2" 0.28" " 7" 2 2" 0.25" " 7" 22" 0.25" " 7" 22 2" 0.25" " 7" 2" 0.25" " 7 2" 24" 0.25" " 7 2" 4" 0.25" 2-9 *Also available with phenolic shell Nitrile Liner Brass Shell* ORDER ONLY ORDER ONLY ORDER ONLY ORDER ONLY = Part No.s in red are to order only SECTION 2 29

30 PSS Shaft Seals PSS SHAFT SEALS The PSS Shaft Seal uses the highest quality materials and manufacturing procedures to give a drip free performance with zero wear to the propeller shaft and the capability of operating safely up to 500 F. They require no lubrication other than water. A fitting is provided on the carbon flange to accept a feed from the engine s water exhaust to assist cooling. Features: Dripless operation Maintenance free Eliminates shaft wear No mess or corrosion Year guarantee ABS approved Over 00,000 in successful operation Suitable for leisure & commercial craft Unaffected by engine movement or vibration Manufactured in the USA Metric & imperial sizes for shafts from 20mm - 4" to 00mm - 4" The carbon/graphite flanges & rotor should never need replacing under normal operating conditions Technical Specifications: High Density Carbon Graphite Flange Once installed and operational the carbon/graphite face will polish the stainless steel rotor during the initial first few minutes of operation ensuring a perfect fit thus eliminating any drips or spray.the ultra dense carbon/graphite composite has a maximum operating temperature of 500ºF, guarding against failure by over heating as can occur on rubber and plastic based seals. Stainless Steel Rotor The one-piece, 6 grade stainless steel rotor is secured to the propeller shaft with double set screws. The twin nitrile O rings are stationary and do not wear. Reinforced Bellows The heavy reinforced nitrile bellows are resistant to petroleum based products and retain their preset dimensions. They provide the best combination of durability, strength and elasticity. Reinforced flexible Nitrile bellows Sterntube Double st/st hoseclamps Fitting for water supply on high speed/planning craft applications Twin Nitrile O-rings Engine coupling 6 st/st rotor Double allen head set screws Ultra dense Carbon graphite stator flange THE PRINCIPLE The seal is created by contact of the carbon face against the rotating stainless steel rotor. A hydrodynamic bead of water between the carbon seal and rotor provides lubrication. The carbon seal and rotor provides lubrication. The carbon seal and bellows assembly is fitted to the stern tube by twin stainless hose clamps. Contact with the rotor is assisted by water pressure which helps to cool the assembly. Seal contact is unaffected by engine laterally or fore and aft. 0 SECTION 2

31 PSS Shaft Seals ORDERING INFORMATION Step Measure the shaft diameter (metric & imperial sizes). Step 2 Step Note: Measure the outside diameter of the stern tube or log. PSS SHAFT SEALS If your boat is fitted with a stuffing box you can still fit a P.S.S. shaft seal. Reverse the outer flange and bolt it up using silicone between the faces. The trunion will then receive the Nitrile bellows! Amount of compression may vary depending on motor mounts & shaft misalignment HOW ORDER Using the first part number i.e (determines the shaft size) add the following suffix for the diameter you require for stern tube. i.e = " shaft for 2" diameter stern tube. Please advise if your shaft diameter requires (larger bellows) to fit over size stern tube than listed. Available at extra cost. Shaft Dia 4" 7 8" " 8" 4" 8" 2" 4" 2" 2 4" 2 2" 2 4" " 4" 2" 5 8" 4" PSS Shaft Seals to fit Stern Tubes Stern Tube Diameters - Sizes available 4", 2", 4", 2", 2 4" 4", 2", 4", 2", 2 4" 4", 2", 4", 2", 2 4" 4", 2", 4", 2", 2 4" 4", 2", 2 4", 2 2" 4", 2", 2 4", 2 2" 2", 2 4", 2 2", 2 4", ", 4", 2" 2 4", 2 2", 2 4", ", 4", 2" 2 2", 2 4", ", 4", 2" 4", 2", 4", 4" 4", 2", 4", 4" 4", 4 4", 4 2", 4 4", 5" 4", 4 4", 4 2", 4 4", 5" 4 2", 4 4", 5", 5 4" 4 2", 4 4", 5", 5 4" 4 2", 4 4", 5", 5 4" 4 2", 4 4", 5", 5 4" Compressed Length (mm) Standard High n/a 26 n/a 26 n/a 25 n/a 25 n/a 248 n/a 248 n/a 248 n/a 248 Bellow Compression Chart Chart /4" /4" /4" /4" " " " " " " " " " " " " " Shaft Size Part No ? ? ? ? 2-08-? ? ? ? ? ? ? ? ? ? ? ? ? Stern Tube Suffix Dia /4" - 0 /2" - 02 /4" - 0 2" /4" /2" /4" - 07 " - 08 /4" - 09 /2" - 0 /4" - 4" /4" - 4 /2" /4" - 5 5" /4" /2" /4" - 9 6" - 20 Shaft Dia Dia 20mm 22mm 25mm 28mm 0mm 2mm 5mm 8mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm 80mm 85mm 90mm 95mm PSS Shaft Seals to fit Stern Tubes Stern Stern Tube Tube Diameters Diameters - Sizes Sizes available available 4", 2", 4", 2", 2 4" 4", 2", 4", 2", 2 4" 4", 2", 4", 2", 2 4" 4", 2", 4", 2", 2 4" 4", 2", 4", 2", 2 4" 4", 2", 2 4", 2 2" 4", 2", 2 4", 2 2" 2", 2 4", 2 2", 2 4", ", 4", 2" 2", 2 4", 2 2", 2 4", ", 4", 2" 2 4", 2 2", 2 4", ", 4", 2" 2 2", 2 4", ", 4", 2" 2 2", 2 4", ", 4", 2" 4", 2", 4", 4" 4", 2", 4", 4" 4", 4 4", 4 2", 4 4", 5" 4", 4 4", 4 2", 4 4", 5" 4", 4 4", 4 2", 4 4", 5" 4 2", 4 4", 5", 5 4" 4 2", 4 4", 5", 5 4" 4 2", 4 4", 5", 5 4" Compressed Length (mm) Standard High n/a 26 n/a 26 n/a 25 n/a 25 n/a 25 n/a 248 n/a 248 n/a 248 Bellow Compression Chart Chart 20mm 20mm 20mm 20mm 20mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm Shaft Size Part No ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Stern Tube Tube Dia Dia Suffix Suffix /4" - 0 /2" - 02 /4" - 0 2" /4" /2" /4" - 07 " - 08 /4" - 09 /2" - 0 /4" - 4" /4" - 4 /2" /4" - 5 5" /4" /2" /4" - 9 6" - 20 SECTION 2

32 Waterlocks/Silencers & Exhaust Hose WATERLOCK / SILENCER WATERLOCKS/SILENCERS & EXHAUST HOSE Part No. Hose Size Max Litres Dimensions (mm) (mm) Engine HP A B C D E /45/50 50HP 7L See drawing details /60/65 5HP 20L /90 50HP L /5 00HP L ANTI SYPHON GOOSENECK Supplied with plastic fixing straps Part No. Description /45/50mm Hose /45/50mm Hose B A C D E EXHAUST HOSE Other sizes and lengths may be available to special order Lloyds approved Vacuum: 0.8 Bar See Section for JCS Hi-Torque Hose Clamps Lining: Black, exhaust gas, salt water resistant EPDM rubber Reinforcement: Synthetic textile fabrics and double steel helix wire Cover: with black corrugated, resistant to heat, salt water, ozone, ebrasion, EPDM rubber ID OD Working Burst Bend Weight 0m 20m (approx) (approx) Pressure Pressure Radius Part No. Part No. mm Inch mm Bar PSI Bar PSI mm kg/m 2 4" " " " " " " " " " " " SECTION 2 DELIVERY Check availability, delivery costs & methods available may be subject to a surcharge.

33 Exhaust Fittings TRANSOM FITTINGS EXHAUST FITTINGS Made in 6 Stainless Steel with 6mm ID fixing holes and ribbed hose tails. Available in straight and 45 variation with either trumpet or angled outlets. ANGLED OUTLET Inlet straight TRUMPET SHAPED OUTLET Inlet straight ANGLED OUTLET 45 fitting TRUMPET SHAPED OUTLET 45 fitting Hose Size Part No. 40mm A 45mm A 5mm A 57mm 6mm 76mm A 89mm A 40mm T 45mm 5mm T 57mm T 6mm T 76mm T 89mm T CONNECTING TUBES Made in 6 Stainless Steel with ribbed ends in straight, 45 and 90. Hose Size Part No. Hose Size Part No. Hose Size Part No. 40mm A 45mm A 5mm A 57mm 6mm A 76mm 89mm 40mm T 45mm T 5mm T 57mm 6mm 76mm T 89mm 0mm T GLASS FIBRE WOVEN TAPE Straight connector Hose Size Part No. Suitable for exhaust systems Fire proof. Temperature resistant to 550 C Excellent chemical resistance Good thermal & acoustic insulation Retains shape, non water absorbent Supplied as a 0 metre roll or 5 metre length carded 40mm mm mm Connector 90 Connector 45 Hose Size Part No. 40mm mm mm Hose Size Part No. 40mm mm mm mm 6mm 76mm mm mm mm Width Thick 0m Part No. Carded Part No. 50mm mm /5P 75mm mm /5P C ANTI-SYPHON UNITS Manufactured in 6 Stainless Steel these simple but effective units are valve free. Available in two body sizes of which the four large ones come fixed with securing brackets and the two small ones with separate securing straps. B 8mm Part No. Hose Size (A) Height (B) Dia. (C) Outlet mm 0mm 50mm 8mm mm 0mm 50mm 8mm mm 95mm 85mm 8mm mm 95mm 85mm 8mm mm 95mm 85mm 8mm A A They are designed to work in conjunction with the waterlock fitted with syphon outlet. As soon as the engine stops air rises from the waterlock to break the syphon effect. Alternatively they can be piped to overboard fittings. Backing Rings Available to Order SECTION 2

34 Morris Lubricants GOLDEN FILM SAE 0 (formerly Supreme 0 ) APPLICATION: Golden film SAE 0 is an ideal choice for lightly loaded older diesel engines used in canal boats, watercraft and generators e.g Lister and Perkins PERFORMANCE: Recommended for use in engines where modern multigrade, high additive level oils cannot be used. Can dramatically reduce the likelihood of bore glazing. API: CC/SD TBN, mg/koh/g: 4.0 MORRIS LUBRICANTS SERVOL PERFORMANCE PLUS 5W/40 APPLICATION: High quality mineral oil designed for use in modern petrol, diesel and turbo charged engines. PERFORMANCE: Provides a high level of engine cleanliness and controls the formation of high temperature lacquers and low temperature sludges Contains an effective dispersant to minimise oil thickening API: CG-4/CF-4/SJ/SL TBN, mg/koh/g:.0 GOLDEN FILM 0W/40 CLASSIC MARINE ENGINE OIL High quality multi grade engine oil designed for petrol and diesel engines, such as in canal boats, where SAE5W/40 may be specified to ensure lubricant flows more rapidly at low temperatures improving component protection Additive level has been chosen and optimised to prevent bore glazing and bore polishing API: CC/SF Ideal for Canal Boats Description Part No. Bulk Pack 4 x 5L plastic bottles Single 5L plastic bottle / Description Part No. Bulk Pack 4 x 5L plastic bottles Single 5L plastic bottle / Description Part No. Bulk Pack 4 x 5L plastic bottles Single 5L plastic bottle / AQUAMAX 2 STROKE OUTBOARD OIL APPLICATION: Recommended for two stroke water cooled outboard engines using premix or oil injection, from high powered down to small cylinder auxiliary engines. PERFORMANCE: Aqua Max 2 has been developed to meet the need for a specialised ash free outboard motor oil for today s high powered multi cylinder two cycle engines. The formulation provides an excellent lubricating film giving an improved engine performance and reduces engine wear. Description Part No. Bulk Pack 2 x Lt Single Ltr Bottle / Description Part No. Bulk Pack 4 x 5Ltr Single 5Ltr Container / Maximum film strength Freedom from ring sticking No plug fouling or pre-ignition Anti-wear, anti-scuffing protection Reduced smoke and clean burning characteristics Reduced deposit formation in ports Physical Characteristics Colour Blue/Purple TBN, mg/koh/g: 4.5 Certified by: National Marine Manufacturers Association (NMMA): TC-W TM R-9402B JASO FB K2EP LONGLIFE GREASE APPLICATION: The high degree of water tolerance makes K2EP ideal for boat trailer bearings, where there is a combination of immersion and high speed road work. PERFORMANCE: K2EP is a mineral oil based, lithium complex, soap-thickened grease, containing performance additives. The additives provide extreme pressure (EP), oxidation, rust and corrosion protection, ensuring effective lubrication is achieved even under the most severe conditions. It has excellent sealing properties which help protect bearings against corrosive atmospheres and the ingress of water, dust and abrasive particles. This grease out performs conventional Lithium greases at high temperatures. Suitable for all general industrial, automotive and any bearing requiring long life high performance Physical Characteristics Appearance: Red Sparkle, Tacky NLGI: 2 Thickener: Lithium Complex Operating Temp Range: -20ºC to +50ºC 4 SECTION 2 Size Part No. 400g cartridge K99 WATER RESISTANT GREASE APPLICATION: Specially designed by Morris to feed evenly around the propeller shaft in the stern tube. PERFORMANCE: Outstanding water resistance qualities providing excellent protection of parts from corrosion and has good sealing properties. Size Part No. 500gm Tub kg Tub kg Tub Physical Characteristics Appearance: Light Brown Smooth Grease NLGI: 2/ Operating Temp Range: -20ºC to +0ºC DELIVERY Unable to send via carrier. Contact your local Aquafax sales depot for alternative delivery methods.

35 Morris Lubricants & Insulation Foam MORRIS UNIVERSAL ANTI-FREEZE MORRIS LUBRICANTS APPLICATION: Recommended for all year round use, Universal Antifreeze protects all water cooled engines from frost damage down to -4ºC and ice damage -50ºC (at 50% of total coolant). PERFORMANCE: Protects against corrosion and prolongs life of metals found in engine cooling system including cast iron, aluminium, copper alloys, solder and other metals Does not form sediment, precipitate additives or form gels that can prematurely block the cooling system Does not affect rubber hoses or gasket materials Lasts two years in service when solution is maintained at 50% Does not form harmful foam inside cooling system Does not contain silicates Description Part No. Bulk pack of 2 x Lt bottles Single Lt bottle / Bulk pack of 4 x 5Lt bottles Single 5Lt container / Physical Characteristics Colour: Blue Type: Ethylene Glycol Meets Standard: BS6580:992 Solution Freezing Boiling SG Vol Point Point Reading 25% -2ºC 0ºC.09 % -20ºC 04.5ºC.057 SUPERCLEAN MORENDO DD DIESEL FUEL ADDITIVE SUPERBLEND ZERO LEAD 2005 A multifunctional diesel fuel additive that will improve ignition quality, combustion and storage of distillate fuels. It is designed to be added to diesel and distillate burner fuels in bulk storage tanks, or to the fuel tanks of diesel engined vehicles and marine craft. Increased Cetane number Improved Lubricity Injector cleanliness Improved dispersancy Improved fuel stability Water tolerance Foam Control Bulk Pack of 2 x 500ml Part No Single 500ml bottle Part No / Physical Characteristics Colour: Amber Treatment Rate: part Superclean Morendo DD to 400 parts fuel SOUNDPROOF INSULATION FOAM INSULATION Designed for boat engine rooms. The reinforced foil faced (oil and tear resistant) laminated acoustic barrier foam is basically non-combustible and meets ISO 9094 of the recreational craft directive. In fact it is to the highest rating (zero) of the fire retardant requirement of BS476 Part 6 and 7. Approx. Dimensions Part No. 0mm thick m x 0.6m mm thick m x.20m mm thick 2m x.20m M 46 ALUMINIUM FOIL JOINTING TAPE 50m x 50mm Part No / A lead free fuel treatment, developed to protect against valve seat recession in 4-stroke engines designed to run on leaded petrol. It is a carefully balanced blend of potassium based organic compounds, that provided enhanced lubricity and wear protection previously attributed to leaded additives. The product does not increase particulate emissions or affect fuel consumption. It is catalytic converter friendly and will not contribute to inlet valve sticking or spark plug fouling. IT SHOULD NOT BE USED IN CONJUNCTION WITH OTHER FUEL ADDITIVES Bulk Pack of 2 x 500ml Part No Single 500ml bottle Part No / Physical Characteristics Colour: Amber Treatment Rate: part Superblend Zero Lead 2005 to 00 parts fuel For A Bigger Range Of Oils And Consumables See Section 5 DELIVERY Unable to send via carrier. Contact your local Aquafax sales depot for alternative delivery methods. SECTION 2 5

36 Fuel Filters & Accessories DIESEL FUEL STRAINER Diesel fuel pre-filter with removable fine 80 micron perforation S/S gauze, washable, in steel body. Features: bleed valve, drain valve, L/H or R/H mounting bracket. Thread Capacity Dimensions Part No. M4 x.5 90 LPH H=25mm L=95mm FUEL FILTERS FUEL FILTERS METRIC THREAD CONNECTIONS Single fuel filter with settling bowl and bleed screw complete with interchangeable cartridge for engine max 500cc. Capacity 50 LPH FUEL FILTER KITS Part No. Description Straight Connector Kit - 8mm Hose Straight Connector Kit - 0mm Hose Swivel Connector Kit - 8mm Hose Swivel Connector Kit - 0mm Hose Thread Bowl Length OA Width Depth Part No. M4x.5 Metal 65mm 00mm 90mm M4x.5 Transparent Plastic 80mm 00mm 90mm FUEL FILTERS UNF THREAD CONNECTIONS Lucas / Cav type unit with common replacement paper cartridge filter. Bulkhead mounting. Either hand. Fitted with metal drain tap has spin cartridge. Thread Capacity Type Length OA Width Depth Part No. 2" UNF 45 LPH Bolt-on 65mm 00mm 90mm " UNF 45 LPH Spin-on 90mm 00mm 85mm STUD COUPLINGS FIT FUEL FILTERS -420 M4 x.5 Stud Coupling 4" Copper Pipe -42 M4 x.5 Stud Coupling 5 6" Copper Pipe -422 M4 x.5 Stud Coupling 8" Copper Pipe FUEL FILTER ACCESSORIES Replacement Spin-On Cartridge (496A) for filter Replacement Cartridge Filter for & & Replacement Metal Drain Plug for " UNF Compression Fitting for 4" OD Tube " UNF Compression Fitting for 5 6" OD Tube " UNF Compression Fitting for 8" OD Tube FUEL FILTER CARTRIDGE More resistant to corrosion if exposed to the elements than standard model Fits our /8/9 filter assemblies Standard filter cartridge for CAV filter heads used on many marine engines Part No B DIESEL FUEL STRAINER/DECANTER For pre engine filter installation Robust, cast bronze nickel plated body Two seperate connected chambers each having S/S filters of different size mesh which are easily removeable for cleaning and re-use Body and lid: Plated Cast tonval ATD. base fixing lugs Lid secured by four S/S bolts and sealed with nitrile O rings above each chamber Inlet/Outlet: BSP Parallel Female First Strainer: AISI 6L with mesh of 9 holes to Linear C.M. Second strainer: AISI 6L with mesh of 4 holes to Linear C.M. Fitted with drain plug to each chamber. /2 A 27 L 250 H 205 h 0 2" Inlet/Outlet 2.5L capacity/flow 400 LPH Part No Size Dimensions Flow Rate Capacity through Part No. G H H L 0. bar bar " LPH 540LPH 6 SECTION 2

37 Greasers/Lubricators & Lubrication Type A Type B GREASERS/LUBRICARS SUMP PUMPS Heavy brass barrel and cast barrel ends, and handle. Internal brass piston with O ring and ball in cage valve. Inlet/outlet for 2" (2mm) I.D. hose. Type A - Undrilled fixing lugs Type B - Outlet pointing down & threaded M4 x.5 inlet Part No. Barrel Barrel C H A P B L Type ID Capacity " 5cm A " 00cm A " 96cm B 2" Hose Connector M4 x " Copper Pipe Connector M4 x.5-42 PATAY SUMP PUMP Passivated steel, capacity 77cc per stroke. Commonly fitted by UK engine manufacturers. Dimensions Height (closed): 240mm Height (extended): 5mm Barrel Diameter: 2mm Spout Projection: 75mm Inlet: 8" BSP Male Part No (pump only) Part No (pump with mounting clips) Suction tube assembly available to order. SUMP PUMPS A simple & convenient solution to changing oil, especially on engines with in-accessible drain plugs. Also ideal for transferring diesel between tanks or to fill small day tanks. External Thread: 2"BSP Internal Thread: 4"BSP No tube P/No With 5" x 4" copper tube P/No QUICK RELEASE BRASS GREASER Brass lubricator for stern tubes, rudder bearings etc. Bulkhead or floor mounted. Capacity: 50ml (5fl oz.). Quick Release Brass Greaser Part No Dimensions: Base width: 80mm ( 8") Projection: 70mm (2 4") Base height: 27mm (") Outlet at base front: 8" BSP threaded OA height extended: 288mm OA height closed: 78mm LUBRICAR KIT (Parts only): Consisting of 2 x 8" BSP connectors, x 4 BSP connector & m nylon hose in polythene bag Part No P Accessories: Part No. Semi rigid high pressure nylon tubing. 5 6" O.Dia per 0m coil " BSPT brass compression connector for nylon tube " BSPT brass compression connector for nylon tube " O.D. Copper tube, annealed, 20g 0m coil " O.D. Copper tube, annealed, 20g 0m coil " BSPT brass connector for 5 6" OD copper tube " BSPT brass connector for 5 6" OD copper tube -400 GLAND PACKING Made from quality yarn lubricated & graphited prior to plaiting. Suitable for stern glands, pumps etc. Supplied as 8m length or if possible carded. Section 8m 0.5m Carded Part No. Part No. 4" (6.5mm) P 5 6" (8mm) P 8" (0mm) P 2" (mm) " (20mm) 2-00 GREASE CUPS Stauffors type grease cups in hot stamped brass. Male BSP Dia.OA Max Height (approx) Part No. 8" 8mm 29mm " mm 40mm " mm 40mm " 40mm 42mm SECTION 2 7

38 Deck Fillers & Fittings PUMP OUT DECK FITTING Fits 2" or 2" Hose Includes x key Pump Out symbol complies with ISO 4567 & BS Spare Plastic Pump Out/Deck Filler Key H H H2 H D D D2 d P G Brass Chrome " DECK FILLERS & FITTINGS S/S PUMP OUT FITTING Highly polished 6 grade stainless steel cap and deck flange Plastic 2" hose tail to suit standard C sanitation hose Plastic key included Specifications: Overall Diameter: Aperture Diameter: Holes: Height: 99mm 64mm 4 x 5.5mm c/sk holes 25mm Part No RINSE OUT DECK FITTING Cast brass deck fitting for 4" (9mm) I.D. hose Cap fitted with O ring & 5 8" AF key slot Body is tapered inside to grip shore filler hose Supplied with name plate and key Dimensions: Flange dia. O.A.: Deck aperture: Depth: 74mm 45mm 72mm Legend Brass Chrome Rinse Out DECK FILLERS Cast brass deck fitting for 2" BSP with plastic hose tails Slotted cap fitted with O ring Name plate and key supplied Accepts 8mm ( 2"), 50mm (2") or 6mm (2 2") hose Hose tail material has a V2 fire rating, test to UN94 & suitable for UK BSS compliance Dimensions: Flange dia.: Deck aperture: Depth: DECK FILLERS Hot stamped brass body and cap with Neoprene O ring seal Slotted cap and three c/sk holes. P/Hose H H H2 D D G Legend Brass Chrome 8mm ( 2") " Diesel mm ( 2") " Water mm (2") " Diesel mm (2") " Water DECK FILLERS Hot stamped brass body and cap with Neoprene O ring seal Slotted cap and three c/sk holes Use hose connectors to adapt deck fillers to suit different hose sizes. G*/BSP H H D D Legend Brass Chrome 2" Diesel " Water G* Thread: BSP ISO 228/ (BS 2779) (DIN 259) DECK PLATES Cast Bronze. Machined. Flange finish with O ring sealed cap Supplied with key G*/BSP H H D D ID Spare Key Part No. 2" " " " mm 6mm 78mm Legend Brass Chrome Water Diesel Petrol G* Thread: BSP ISO 228/ (BS 2779) (DIN 259) 8 SECTION 2 See Section for Hoses & Hose Connectors

39 Deck Fillers & Fittings DECK FILLERS & FITTINGS DECK FILLERS Moulded in nylon and resistant to diesel Cap is slotted for plastic key supplied Cap secured by c/p brass ball chain O.A. dia. 95mm Bodies and caps available in different colours for fuel or water DIESEL Body Cap Legend Hose Part No. White White Diesel 2" White Red Diesel 2" White White Diesel 2" White Red Diesel 2" Spares Part No Spare Key White Filler Cap (Water) Blue Filler Cap (Water) Red Filler Cap (Diesel) White Filler Cap (Diesel) WATER Body Cap Legend Hose Part No. White White Water 2" -859 White Blue Water 2" -859 White White Water 2" White Blue Water 2" PUMP OUT FITTING Designed for closed toilet systems and the nozzle from shore pump out stations. Moulded in black nylon and c/w key. Cap is fitted with 5 8" hex, socket for opening with special key supplied. O.A. Dia: 4" (95mm) Deck aperture: 54mm For 2" Hose Part No Spare Key Part No Spare cap black Part No PLASTIC UNEQUAL HOSE CONNECR ( - 8mm Hose) The connector is stepped and can be cut to join many hose sizes. Hose increments are: mm, 6mm, 9mm, 22mm, 25mm, 28mm, 2mm and 8mm. Part No STRUM BOX Cast in Brass with stainless steel gauze. 2 hole fixing. P/Hose ID F L Part No. 20mm ( 4") mm (") DECK DRAIN Countersunk brass c/w backnut, securing lugs Also suitable for skin fitting No grating No slot BSP SW H A F D D Part No. 8" " " " " " " " ANTI SPLASH BACK CAN-SB Anti-Foam directly connected to the deck filler, stops the foam and fuel escaping during the filling of the tank and draws them back into the body of the Anti-Foam, converting the foam into liquid and sending it to the tank. For fuel connectors & fuel lines see our Section 6 catalogue, pages Comes with 2 rubber adaptors (8mm and 50mm dia.) complete with clamp to connect the deck filler. Anti-foam can be connected to the tank with a 8mm or 50mm hose connector (see pages 40-4) Part No SECTION 2 9

40 CAN-SB Plastic Portable Fuel Tanks & Jerry Cans PLASTIC FUEL TANKS & FITTINGS PLASTIC PORTABLE FUEL TANKS Supplied with filler cap with air vent, 8mm hose connection and dip tube Moulded sight gauge on 2-200, 2-20 and Vertical or Horizontal operating position on and Conforms to RINA/CE regulations *Optional filler cap with gauge and vent can be fitted to these portable fuel tanks. Part No Part No. Ltrs Sight Gauge H (mm) W(mm) L(mm) Function No Vertical or Horizontal Yes Vertical or Horizontal* No Horizontal Yes Horizontal* Yes Horizontal* JERRY CANS Part No. Ltrs H (mm) W(mm) L(mm) JERRY CAN DIP TUBE ADAPR KIT (8mm) Can be added to , & Part No JERRY CAN FLEXIBLE POURING TUBE Extends from 0 to 80cm Part No SPARE CAPS 45 DEGREE SWIVEL POURING SPOUT For Jerry Cans 2" BSP Part No SECTION MARINE FUEL HOSE EN ISO 7840 (0m) mm ID ISO 7840 A mm ID ISO 7840 A mm ID ISO 7840 A2 PORTABLE FUEL TANKS Part No FIXED TANKS 2" BSP Part No JERRY CANS 2" BSP Part No CAN-SB INLINE FILTERS CAN-SB Inline Petrol Filter 2000cc 8mm hose Part No CAN-SB Inline Diesel Filter 2000cc 8mm hose Part No LARGER SIZES AVAILABLE ORDER 40 SECTION 2 PLASTIC TANK BRACKETS Consists of four brackets, four 20cm straps and two buckles. Part No SEE PAGE 4 FOR MORE INFORMATION ON FIXED FUEL TANK SENDERS AND GAUGES

41 FIXED PLASTIC FUEL TANKS Can be used for petrol or diesel fuel Made of high density polythene plastic suitable for acids and fuels Conforms to RINA/CE and ISO 2487 LOW PROFILE 200mm high x 90mm wide Part No. Litres L (mm) Sender or or or or MEDIUM PROFILE FIXED PLASTIC FUEL TANKS & FITTINGS Part No. Litres L (mm) W (mm) H (mm) Senders or or or or or or or HIGH PROFILE Part No. Litres L (mm) W (mm) H (mm) Senders or or or or or or or or or or CAN-SB Rigid Plastic Fuel Tanks Supplied with a standard porthole connection plate incorporating:. 2" BSP Filler Cap with air vent - see page 40 (Optional use of & see below) 2. 4" BSPF spare blanked connection (for diesel return or second fuel outlet for second engine). Removeable sender cover plate to take five hole fixing flange mount sender (optional - see below or page 4) 4. Fuel Outlet for 0mm ID hose connection 5. 6mm connector for vent pipe INLET FITTINGS STRAIGHT PLASTIC 4" BSP 0mm hose Part No º CHROMED BRASS 4" BSP 0mm hose Part No º PLASTIC SWIVEL HOSE CONNECR 2" BSP Part No FILLER PIPE KIT 90º elbow and 8/50/60mm ID hose connector 2" BSP Part No LEVER FUEL TANK SENDER WITH GAUGE Part No. Min Tank Height mm mm mm mm SEE PAGE 4 FOR ELECTRIC TANK SENDERS & GAUGES PLEASE NOTE: WITH ALL TANKS CHECK SCK AVAILABILITY Due to multitude of size and type options and space required to store not all models may be in stock SECTION 2 4

42 Tank Vents & Miscellaneous TANK VENTS & MISCELLANEOUS STRAIGHT TANK VENT STRAIGHT TANK VENTS Choice of raised or flush tank vent Securely fixed S/S 400 micron flame proof gauze Polished brass or chrome plated brass (UP) (DOWN) Type Hose ID G H H D D P Finish Part No. Raised 6 ( 5 8") 9x9 F Chrome Raised 9 ( 4") 4" Chrome Raised 9 ( 4") 4" Brass TANK VENTS Choice of raised or flush tank vent Securely fixed S/S 400 micron flame proof gauze Chrome plated brass FLUSH TANK VENT Type Hose ID G L L D D H P Pipe Part No. Raised 6 ( 5 8") 9x9 F Down Raised 6 ( 5 8") 9x9 F Up Flush 6 ( 5 8") 9x9 F Down TANK VENTS Tank vent with flame trap All vents fit N-0040 Dolly Thread Height OA Diameter Shape Finish Part No 2" BSP 47mm 25mm AF* Hexagonal Brass " BSP 47mm 25mm AF* Hexagonal Chrome C 2" BSP 27mm 0mm Round Brass SEMI FLUSH TANK VENT Vents with anti flame mesh Material: Brass Hose Size Height OA Finish Part No 6mm 5mm Chrome mm 55mm Chrome DRAIN PLUG Brass bodied with removeable plug type cap. G*Thread H A D Part No. 2 " BSP " BSP SHELL VENT/SCUPPER Chrome plated Brass With or without heavy S/S gauze Supplied with back nut G*/BSP SW H A D F With Without Gauze Gauze 2" " " " " " G* Thread: ISO 228/ (BS 2779) (DIN 259) 42 SECTION 2 CAPTIVE DINGHY DRAIN PLUG & SOCKET Chromed Brass with captive washered plug. x c/sunk m/screw attaching inner flange to outer. Fits 0mm thick hull. OA Dia. 55mm. 7mm internal aperture Part No (Loose) or Part No P (Carded) OUTBOARD WELL DRAIN A corrosion proof, easy-to-install replacement for the old fashioned brass fitting. Can also be used as a chafe guard to lead hose, wiring, steering cables etc. through bulkheads, floor timbers and fibreglass panels. Barbs on OD insure positive locking action. Designed to fit " (25.4mm) hole. Flange: 4" (.75mm) Useable length: 2 2" (6.5mm) Part No DRAIN PLUG Moulded from Forespar s Marelon and fitted with a neoprene seal, it is designed to not deteriorate and crack with age. Part No G* Thread: ISO 228/ (BS 2779) (DIN 259)

43 TANK SENDERS & GAUGES WEMA-SYSTEM TM FUEL & WATER TANK GAUGES FUEL & WATER TANK SENDERS Wema Fuel Level Gauge Black 2/24V Part No Wema Fuel Level Gauge White 2/24V Part No Senders & Gauges for Fuel and Water Tanks Part No. Description Wema S/S Fuel/Water Sender 50mm Wema S/S Fuel/Water Sender 75mm Wema S/S Fuel/Water Sender 200mm Wema S/S Fuel/Water Sender 225mm Wema S/S Fuel/Water Sender 250mm Wema S/S Fuel/Water Sender 275mm Wema S/S Fuel/Water Sender 00mm Wema S/S Fuel/Water Sender 50mm Wema S/S Fuel/Water Sender 400mm Wema S/S Fuel/Water Sender 450mm Wema S/S Fuel/Water Sender 500mm Wema S/S Fuel/Water Sender 550mm Wema S/S Fuel/Water Sender 600mm Wema Water Level Gauge Black 2/24V Part No Wema Water Level Gauge White 2/24V Part No Wema Senders will operate with Uflex gauges Water Level Gauge Ultra Black 4-47 Water Level Gauge Ultra White Fuel Level Gauge Ultra Black Fuel Level Gauge Ultra White See Section 4 for more Uflex Gauges & Senders 5 Hole Flange Mount Fitting UFLEX ADJUSTABLE FUEL LEVEL SENDER 20-60cm Single Station Part No UFLEX FUEL LEVEL GAUGES WEMA-SYSTEM TM BLACK WATER TANK SENDERS & GAUGES Part No. Description Waste Tank Sender 00mm long 4" BSP Waste Tank Sender 205mm long 4" BSP Waste Tank Sender 05mm long 4" BSP Waste Tank Sender 40mm long 4" BSP Wema Holding Tank Indicator - Black Wema Holding Tank Indicator - White Ultra Black Part No Ultra White Part No //2/ CAN-SB BLACK WATER TANK SENSOR SWITCH " BSP Part No WASTE TANK SENDER ADAPTER 4" BSP Note: Use a 44mm dia. hole saw to cut sender opening and 5mm drill to fix the sender adapter to the tank. Part No CAN-SB WARNING LIGHTS Part No Red warning light 2/24V Part No Green warning light 2/24V SECTION 2 4

44 Aquafax Catalogue Info Valves, Pipe Fittings, Gas Equipment, Hose & Clips Hull & Engine Room Fittings 2 Plastic Seacocks & Pipe Fittings Ultraflex Controls & Steering 4 Paints, Sealants & Consumables 5 6 General Boat Equipment and Accessories Cabin Fittings, Hinges, Padlocks, & General Hardware 7 Electrical - Batteries, Cables, Terminals, Chargers & Inverters 8 9 Calorifiers, Toilets, Pumps, Taps, Sinks & Fittings Johnson Pump - Engine Cooling, Bilge, Deckwash & Macerators 0 M Mastervolt Electricals - Complete Systems Lewmar - Windlasses, Anchors, Thrusters, Winches, Hardware & Steering L Narrowboat Equipment NB We offer over 6,000 quality marine and industrial products from all around the world. Our range can be viewed online or in the Aquafax printed catalogues. 44 SECTION 2