Article VDO black N N N N N

Transcription

1 4 Made in Germany black white VDO black VDO white Description Ø Scale Volt B N N Amperometer B N N Amperometer with shunt N Shunt B N N Voltmeter B N N N N Hour counter , N N Quartz clock N Alarm horn B B N N N N Rudder angle indicator with sender B B N N03 2 N N Only gauge For chromed gauge please order only the frame.

2 413 Made in Germany black white VDO black VDO white Description Ø Scale Volt B N N N N Water thermometer 0 C/20 F 0 C/20 F B B N N N N Oil thermometer 10 C/300 F 10 C/300 F B B B B B B N N N N N N N N N N N02 4 N Oil pressure bar/72psi bar/14psi 30bar/43psi bar/72psi bar/14psi 30bar/43psi N N Turbo Pressure 2bar/28psi V B B N N N N Fuel indicator for lever sender and tubular Ohm 0-1/4-4/ B B N N N N Fuel indicator for tubular sender 0-1/4-4/ B N N Water tank level with sender 0-1/4-4/ B N N Only gauge 0-1/4-4/ B N N Waste tank level with sender 0-3/4 - pieno B N N Only gauge 0-3/4 - pieno B B B 4.003B 4.004B 4.00B 4.006B N N N N N N N N N N N N N N Tachometer to be connected to W alternator terminal Tachometer with hour counter, to be connected to W alternator terminal 3000 giri/min 4000 giri/min 4000 giri/min 3000 giri/min 4000 giri/min 000 giri/min 6000 giri/min B N N N N N N N N N N Electronic Sumlog with gauge, sender and m. cable 0- nodi 0-30 nodi 0-0 nodi 0-30 nodi 0-0 nodi VDO For chromed gauge please order only the frame. Description Ø Scale Ohm Volt Fuel level 0-1/2-1/ /90-0, -180 for -180 ohm sender only for sender art. 4.42XX

3 414 Made in Germany black chromed VDO black VDO chromed Description Ø N N X X Round frame VDO Description Volt N Resistor to turn to thermometers, manometers, fuel and rudder angle indicators VDO Description Volt N N Lamp holder with red bulb for manometers Rudder angle sender VDO Rudder angle sender D D for 1 gauge for 2 gauges Spare impeller for electronic VDO speedometer VDO speed (knots) N N N // Spare sender for electronic VDO speedometer VDO knots scale Male connector 2,6 mm. Tool to connect cable and fitting Cable for gauge

4 ViewLine The new generation Viewline is the new instrument platform for homogeneous and for the outboard motor and sailing yachts. Design of the line Viewline the pursuit of precision and the use of modern technologies are put on the same level of handling and attractive design. Viewline tools, developed with the new logic Plug & Play, both are designed for mounting on the view that the wire in the instrument panel and therefore offer maximum flexibility. The innovative modular design ensures maximum flexibility of configuration, regardless of whether or not the frame in relief. IP67. Voltage from V to 16V voltage and resistance drop from 16V to 32V. Integrated red LED lighting. All instruments are supplied with lockring Viewline and connection cable black white Description Ø Scale Volt Made in Germany Amperometer -10 / 0 / Shunt -10 / 0 / Voltmeter Water thermometer 40 C/0 C F/20 F Oil pressure bar/80 psi bar/10 psi Inverter oil pressure 30 bar/43 psi 2 bar/400 psi Turbo pressure 2 bar 28 psi Fuel indicator for lever sender and tubular Ohm compatible with art. 4.41, 4.42 and from to art / Fuel indicator for tubular sendercompatible from art to art / Fuel indicator for tubular sender ohm compatible with art and from art to art Indicatore livello acque chiare per sensore tubolare Ohm compatibile da art ad art E - F 0-1/ Indicatore livello acque chiare per sensore tubolare Ohm compatibile da art ad art / Quartz clock ,9

5 416 ViewLine Made in Germany All instruments are supplied with lockring Viewline and connection cable black white Description Ø Scale Volt Rudder angle indicator Sender single station Sender double station /24V black white Description Ø Scale Volt giri Tachometer with hour meter connected to the terminal W alternator 4000 giri 000 giri giri Tachometer with hour meter connected to the terminal W alternator giri 4000 giri 000 giri SUMLOG - Knot transmitter compatible with art not included. Connects to a NMEA 0-0 kn Black White Chromed Description Ø C C C Cornice triangolare C C C31860 Cornice tonda C31918 Cornice triangolare C31913 C31916 C31914 Cornice tonda C32764 C3276 Cornice triangolare 0 C32749 C32761 Cornice tonda Cable with MQS connector 8-pin compatible with all the instruments Viewline C911 MQS 14-pin connector needed for tachometer Viewline C9221 Resistor compatible with all Viewline series, tools for connecting to the system at V to 24V. White Black B VDO fuel kit consists of: - gauge white (art. C600143) with round frame white - level sensor (art. 4.42) - mounting flange (art. 4.4) - 8-pin cable (art ) VDO fuel kit consists of: - gauge black (art. C600137) with round black frame - level sensor (art. 4.42) - mounting flange (art. 4.4) - 8-pin cable (art )

6 WATER TEMPERATURE SENSOR 417 VDO temp. thread ground insul. poles N M14 x 1, N M16 x 1, N M18 x 1, type A Ø Note A6 A6 A N N N N 1/2-14NPTF 1/4-18NPTF 3/8-18NPTF /8-18UNF-3A A6 A6 A6 A D D D M14 x 1, M14 x 1, M14 X 1, A7 A7 A ,8,8, N N N N M14 x 1, M18 x 1, 1/2 x14nptf 3/8-18Dryseal G6 G6 G6 G C C 1/4 x18nptf 3/8 x18nptf G6 G6,9 2 inø (D),9 2 inø (D) OIL PRESSURE SENSOR (not suitable for water pressure) VDO bar Bar C C C C C thread M x 1K M x 1K ground insul. poles type A B Note A1 A1 A1 E1 A C C C C C C C C C 0, 0, 0, 0,2 0, 0,7 0,9 1, 0,8 M x 1K M x 1K M X 1K M14 X 1, M X 1 M X 1 M X 1, C2 C2 20, 20, C C C C C C C C C C C M x 1, M x 1K M x 1K M14 x 1, M X 1, M14 X 1, 3/8-18Dryseal C3 E3 C2 E3 B3 20,8 20, 20, 20, 23,8 1, K K C K 2 2 3/8-18Dryseal E1 B3 B3 B3 23,8 1,3 2 inø (D) 2 inø (D) 2 inø (D) 2 inø (D) C C C 0,8 0,8 0,6 1/8-27 NPTF 1/8-27 NPTF M18 X 1, B4 B4 E4 20,

7 VDO 4.42 C9168 Adjustable from mm. 14 to 400 Resistance Ohm -180 description Lever sender for fuel tanks (without gaskets) Compatible with art / /634/ /638/ C N Lever sender for fuel tanks (without gaskets) Compatible with art Gaskets for art. 4.42/ C from mm. 200 to Lever sender for fuel tanks with gaskets. Compatible with art /634/ /638/738 VDO Adjustable Resistance Ohm description N N N from mm. 80 to 600 from mm. 600 to 00 from mm. 00 a Capacitive sensor for stainless steel water tanks suitable for gauges art /7B N N from mm. 80 to 600 froma mm. 600 to Capacitive sensor for waste water tanks suitable for gauges art B

8 419 TUBOLAR SENSOR VDO ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES lenght Resistance Ohm -180 description Stainless steel tubular sender for fuel and water tanks Compatible with art /634/ /638/738 VDO lenght Resistance Ohm description ES ES ES ES ES ES ES ES ES ES Stainless steel tubular sender for fuel and water tanks Compatible with art VDO lenght Resistance Ohm description R R R , 91,0 614, ,-61,4 0,-73,3 0,-76,3 2,-6 2,-68 2,-72 2,-82,8 2,-79,6 2,-74,9 2,-84,3 2,-7,4 2,-77,6 2,-,3 2,-82,2 Aluminium tubular sender for fuel tanks Compatible with art Altre misure disponibili a richiesta

9 420 FARIA UFLEX ENGINE CONTROL black white chromed description Ø scale volt Tachometer for diesel engines. Connection to W alternator terminal rpm 4000 rpm Tachometer for gasoline inboard, sterndrive engines, cylinders 6000 rpm Tachometer for ourboard motors with alternators poles With hour counter 7000 rpm 7000 rpm Synchronizer for 2 engines, gasoline and diesel Only speedometer (pitot) Hour counter h Amperometer Only rudder angle indicator Voltmeter Temperature water indicator C Oil pressure indicator 3 bar Fuel level indicator Water level indicator Trim up-down indicator Mercury, Mariner, Volvo Ø P., Volvo > Johnson, Evinrude Yamaha > Multi function indicator : fuel level, Voltmeter -16 V, oil pressure bar oil temperature 40-0 C 3

10 Water temperature sensor 40-0 C, thread 1/8 NPTF 4.49 Oil pressure sensor bar, thread 1/8 NPTF Rudder angle sender single double Pitot tube sender complete with bracket and 6 m. hose Gaskets for art Lever sender for fuel tanks (without gaskets) -180 ohm, for fuel sensors from mm. 14 to 400. Level indicator art /634/734. Pico 1 line is a range of digital gauges at /30 V. Made exclusively for control panels, for easy mounting and compact size. Screen with 3 red led figures high 13 mm., 999 reading points Voltmeter 0/0 V. Ø c Voltmeter 0/210 V. a.c Amperometer with shunt 0 mv. Ø c Amperometer with shunt 0 mv. a.c. 220 V Thermometer 0/99,9 C with sensor Level indicator for fuel and water sensors /180 Ohm.

11 422 Electro-Hydraulic trim tab control panel complete with pump, oil tank, 2 actuators (length 30 mm., stroke 63 mm.) fittings, 6 m. hydraulic hose, 6, m. screened electric cable. (switch and panel on request). Warning : Never push at same time buttons up and down. Motor is irretrievably damaged (burnt). To avoid motor damaged use relay art , voltage V voltage 24V Relay to avoid control panel burnt when buttons up-down pushed at same time RM RM tactile switches Dims. mm.70x70x40 depth Kit to drive 4 hydraulic cylinders actuators. Complete with 2 cylinders actuators and fittings. Gauges to know the position of trim tabs. Sensor cable 6 m. length. Digital led instruments kit with variable light for day and night. 82x63x19 mm.,. Dims. mm. 82 x 63 x single station 4.4 double station Gauges to know the position of trim tabs. Sensor cable 6 m. length. Analogue instruments kit Ø mm V V for single station V V for double station 4.0 Trim indicator with variable light trim for day and night, provided with an automatic trim tabs closure system. Pulling out the starter key tabs automatically go to rest position. Completely tight. Dims. mm. 70 x 70 ATR control, to put tabs back to rest position pulling out starter key, not to damage stainless steel shaft voltage V voltage 24V

12 423 Spare parts for control flaps Bennett 4.83 Kit fittings for control panel Kit raccordi per doppio pistone Hydraulic actuator cylinder Length 300 mm., stroke 8 mm Length 30 mm., stroke 63 mm. Sensor to know trim tabs position green cable red cable Electro-hydraulic control panel voltage V voltage 24V Solenoid valves green cable V red cable V green cable 24V red cable 24V 4.86 Screened electric cable 6. m Hydraulic hose m. 6, Ø interior mm. 4, exterior Ø mm. 6, ATF SPEED D III ISO 32 Oil red special hydraulic oil has special requirements for use in inverters, hydraulic steering and trim tabs. Details DEXRON III, Allison C-4 - Mercon, Voith G ZF TE ML 14, MB liter bottle, pack 24 pcs. Pair of stainless steel tabs, 3 mm. thickness mm. 3 Dim. mm. Boat mt x x x230 Pair of original Bennet stainless steel tabs Dim. mm. Boat mt x x x x2 Other sizes on request.

13 Spare electro-mechanic cylinder Electro-mechanic actuators. complete with control panel. It is a new mechanism in the cylinder : an electric motor drives gears driving the piston. Accurate and powerful, can be compared to hydraulic models. Stroke 61 mm Spare control panel Pair of inductive sensor to check trim tabs angle. Very easy mounting on transom near trim tabs. Completely tight with m. cable and stainless steel mounting brackets. ( To combine with panel art or with indicator art ) LCD display panel showing trim tabs angle in 2 scales with figure from 0 to 9. Green light on screen. powereø Dims. x0 mm. To combine with art ITrim tabs angle LED indicator. 2 scales with red LED, can be seen also with sun. Complete with feeder. Flush mount Ø mm.. To combine with art

14 42 ELECTROMECHANICAL TRIM TABS UFLEX MT The trim tabs system UFLEX MT works by ball screw in hardened steel, suitable to withstand high thrust loads. Actuators are fully waterproof in thermoplastic resin, water resistance is ensured by a double seal and the presence of the bellows (patented). The moving part of the actuator is protected from the attack of the marine environment, its installation is facilitated by the system hub-mounting bracket snap-in (patented) with electrical cable through protected to prevent abrasion. Stem and stainless steel wings. The system requires no maintenance. FEATURES: - V power supply - Total length 301 mm actuator closed - Stroke: 7 mm - Grade of protection IP Kit Trim Tabs MT included: - 1 pair of actuators black V - 1 joystick EASYJOY The tables are not included in the package, you must order them separately and specify size when ordering. See page EASYJOY compact device with joystick control (patented). Includes auto line-up (function of automatic realignment of the tabs). Comes complete with connecting cables Actuator and black bracket V Bracket adjustment / replacement BENNETT systems. Allows installations of the TRIM TABS pistons using the mounting holes in the case of existing installations of previous systems BENNETT.