COUPLINGS AND GROOVED FITTINGS GIUNTI E RACCORDI SCANALATI COLLIERS ET RACCORDS RAINURES
|
|
|
- Bryce Lindsey
- 5 years ago
- Views:
Transcription
1 COUPLINGS AND GROOVED FITTINGS GIUNTI E RACCORDI SCANALATI COLLIERS ET RACCORDS RAINURES JUNE / GIUGNO / JUIN 2007
2 ASTM A 536 / DUCTILE CAST IRON / GHISA SFEROIDALE / FONTE DUCTILE Product manufactured in ductile cast iron in accordance with ASTM A grade with polymeric gasket in EPDM grade E in accordance with ASTM D-2000 and its corresponding fastening elements (heat treated bolts and nuts in carbon steel in accordance with ASTM A183 zinc electroplated). Suitable for the transportation of fluids such as water, oil-free air and a broad range of chemical products between -34oC and +110 C at pressures up to 35 Bar (except for models DS1, DS2, DA1 and 321 whose service pressure is 21 bar). NB: The incorporated sealing gasket (EPDM) is not valid for use with petroleum derivatives (oils, petrols, etc) or with gases. Prodotti in ghisa sferoidale secondo ASTM A-536 grado con guarnizione polimerica in EPDM grado E secondo ASTM D-2000 e corrispettivi elementi di fissaggio elettrozincati (perni, bulloni e dadi) secondo ASTM A183. Adatti per il trasporto di fluidi come acqua, aria esente da olio, ed un ampia gaa di prodotti chimici tra 34 e +110 C con pressione fino a 35 Bar (eccetto i modelli DS1, DS2, DA1 e 321 per i quali la pressione di esercizio è 21 Bar). NOTA: La guarnizione in EPDM non può essere utilizzata, nè per il trasporto di prodotti derivati dal petrolio (olio, benzina, ecc.), nè per gas. Produit fabriqué en fonte ductile suivant ASTM A-536 correspondant à la qualité avec joint élastomère EPDM grade E selon ASTM D-2000 avec les éléments de serrage nécessaires (boulonnerie avec traitement thermique et écrous en acier selon ASTM A183 electrozinges). Adaptés pour le transport des fluides tel que l eau, air sans trace d huile et une large gae de produits chimiques entre -34º C et 110º C pour des pressions jusqu à 35 bars (A l exception des modèles DS1, DS2, DA1 et 321 ou la pression de service est limité a 21 bars). Note: Le joint d étanchéité (EPDM) est déconseille pour le transport de produits dérivés du pétrole (huiles, essences, ) et gaz. ASTM A-536 (Standard Specification for ductile Iron Castings) ASTM D-2000 (Standard Classification System for rubber Products in Automotive Applications) APPROVALS / CERTIFICAZIONI / APPROBATIONS FM (Factory Mutual Research Corp.) Approved for fire protection services in accordance with Standard FM Approvals 1920 Approvati per installazioni antincendio in accordo con lo Standard FM Approvals 1920 Approuvé pour les installations de protection incendie suivant la norme FM - Class 1920 UL (Underwriter s Laboratories, Inc.) The products are listed for fire protection services under Standard reference UL 213 I prodotti sono indicati per installazioni antincendio secondo lo Standard di riferimento UL 213 Les produits sont homologués pour les installations de protection contre l'incendie suivant le standard de référence UL
3 RN RIGID COUPLING GIUNTO RIGIDO ACCOUPLEMENT RIGIDE // Galvanized Zincato Galvanisé 6RN2G205 6RN2G " ,24 6,12 6RN2G206 6RN2G /4" ,51 6,14 6RN2G207 6RN2G /2" ,85 6,72 6RN2G208 6RN2G " ,11 7,06 6RN2G20B 6RN2G50B /2" ,02 7,87 6RN2G20A 6RN2G50A 80 3" ,35 8,79 6RN2G20C 6RN2G50C 100 4" ,72 13,97 6RN2G20H 6RN2G50H 125 5" ,19 16,63 6RN2G20K 6RN2G50K /2 O.D" ,55 20,54 6RN2G20E 6RN2G50E 150 6" ,22 19,11 6RN2G20M 6RN2G50M 200 8" ,51 39,80 6RN2G20N 6RN2G50N " ,86 87,13 6RN2G20Q 6RN2G50Q " ,24 97,78 (painted) (vernice) (peinture) (galvanized) (zincato) (galvanisé) FN FLEXIBLE COUPLING GIUNTO FLESSIBILE ACCOUPLEMENT FLEXIBLE // Galvanized Zincato Galvanisé (painted) (vernice) (peinture) (galvanized) (zincato) (galvanisé) 6FN2G205 6FN2G ,16 6,47 6FN2G206 6FN2G / ,17 6,50 6FN2G207 6FN2G / ,51 6,54 6FN2G208 6FN2G ,77 6,89 6FN2G20B 6FN2G50B / ,14 8,28 6FN2G20A 6FN2G50A ,54 9,24 6FN2G20C 6FN2G50C ,29 14,81 6FN2G20H 6FN2G50H ,30 17,52 6FN2G20K 6FN2G50K /2 O.D ,55 21,13 6FN2G20E 6FN2G50E ,60 20,12 6FN2G20M 6FN2G50M ,73 41,98 6FN2G20N 6FN2G50N ,88 92,35 6FN2G20Q 6FN2G50Q ,75 103,62 FR COUPLING REDUCED GIUNTO RIDOTTO ACCOUPLEMENT REDUIT // (painted) (vernice) (peinture) 6FR2G287 50x40 2"x1 1/2" 60.3x ,19 6FR2G2B8 65x50 2 1/2"x2" 76.1x ,27 6FR2G2A8 80x50 3"x2" 88.9x ,76 6FR2G2AB 80x65 3"x2 1/2" 88.9x ,76 6FR2G2C8 100x50 4"x2" 114.3x ,50 6FR2G2CB 100x65 4"x2 1/2" 114.3x ,50 6FR2G2CA 100x80 4"x3" 114.3x ,31 3
4 MECHANICAL TEE THREADED DERIVAZIONE FILETTATA DERIVATION SIMPLE TARAUDEE DS1 6DS2T283 50x15 2 x1/2 60.3x ,00 6DS2T284 50x20 2 x3/4 60.3x ,32 6DS2T285 50x25 2 x1 60.3x ,49 6DS2T286 50x32 2 x1 1/4 60.3x ,94 6DS2T287 50x40 2 x1 1/2 60.3x ,94 6DS2T2B3 65x15 2 1/2x1/2 76.1x ,03 6DS2T2B5 65x25 2 1/2 x1 76.1x ,07 6DS2T2B6 65x32 2 1/2 x1 1/4 76.1x ,07 6DS2T2B7 65x40 2 1/2 x1 1/2 76.1x ,07 6DS2T2B8 65x50 2 1/2 x2 76.1x ,67 6DS2T2A3 80x15 3 x1/2 88.9x ,92 6DS2T2A4 80x20 3 x3/4 88.9x ,92 6DS2T2A5 80x25 3 x1 88.9x ,92 6DS2T2A6 80x32 3 x1 1/4 88.9x ,92 6DS2T2A7 80x40 3 x1 1/2 88.9x ,34 6DS2T2A8 80x50 3 x2 88.9x ,92 6DS2T2C5 100X25 4 x x ,04 6DS2T2C6 100X32 4 x1 1/ x ,48 6DS2T2C7 100X40 4 x1 1/ x ,48 6DS2T2C8 100x50 4 x x ,74 6DS2T2CB 100x65 4"x2 1/2" 114.3x ,48 6DS2T2CA 100x80 4"x3" 114.3x ,20 6DS2T2K8 150x50 6 1/2 O.D"x2" 165.1x ,06 6DS2T2KB 150x65 6 1/2 O.D"x2 1/2" 165.1x ,06 6DS2T2EA 150x80 6"x3" 168.3x ,06 MECHANICAL TEE GROOVED DERIVAZIONE SCANALATA DERIVATION SIMPLE RAINUREE DS2 6DS2G286 50x32 2 x1 1/4 60.3x ,52 6DS2G287 50x40 2 x1 1/2 60.3x ,52 6DS2G2B6 65x32 2 1/2 x1 1/4 76.1x ,80 6DS2G2B7 65x40 2 1/2 x1 1/2 76.1x ,80 6DS2G2A6 80x32 3 x1 1/4 88.9x ,10 6DS2G2A7 80x40 3 x1 1/2 88.9x ,10 6DS2G2A8 80x50 3 x2 88.9x ,10 6DS2G2C7 100x40 4 x1 1/ x ,27 6DS2G2C8 100x50 4 x x ,27 6DS2G2CB 100x65 4 x2 1/ x ,27 6DS2G2CA 100x80 4 x x ,27 6DS2G2H6 125x32 5"x1 1/4" 139.7x ,85 6DS2G2EA 150x80 6"x3" 168.3x ,05 6DS2G2EC 150x100 6"x4" 168.3x ,05 DA1 4 BRANCH OUTLET (U-bolted) DERIVAZIONE CON BULLONE AD U COLLIER U BOULONNÉ 6DA2T253 25x15 1"x1/2" 33.4x ,87 6DA2T263 32x15 1 1/4 x1/2 42.4x ,29 6DA2T264 32x20 1 1/4 x3/4 42.4x ,29 6DA2T265 32x25 1 1/4 x1 42.4x ,69 6DA2T273 40x15 1 1/2 x1/2 48.3x ,72 6DA2T274 40x20 1 1/2 x3/4 48.3x ,72 6DA2T275 40x25 1 1/2 x1 48.3x ,72 6DA2T283 50x15 2 x1/2 60.3x ,97 6DA2T284 50x20 2 x3/4 60.3x ,97 6DA2T285 50x25 2 x1 60.3x ,27 6DA2T2B3 65x15 2 1/2 x1/2 76.1x ,71
5 90 90 º ELBOW GOMITO a 90 º COUDE , / , / , , B / , A , C , H , K /2 O.D , E , M , N , Q , º ELBOW GOMITO a 45º COUDE 45º , / , / , , B / , A , C , H , K /2 O.D , E , M , N , Q , TEE T TEº , / , / , , B / , A , C , H , K /2 O.D , E , M , N , Q ,35 5
6 130R REDUCING TEE T RIDOTTO TE REDUIT x25 2 x1 60.3x , x40 2 x1 1/2 60.3x , B7 65x40 2 1/2 x1 1/2 76.1x , B8 65x50 2 1/2 x2 76.1x , A5 80x25 3 x1 88.9x , A8 80x50 3 x2 88.9x , C7 100x40 4 x1 1/ x , C8 100x50 4 x x , CB 100x65 4 x2 1/ x , CA 100x80 4 x x , HC 125x100 5 x x , K8 150x50 6 1/2 O.D x x , E8 150x50 6 x x , KC 150x /2 O.D x x , EC 150x100 6 x x , CONCENTRIC REDUCER RIDUZIONE CONCENTRICA REDUCTION CONCENTRIQUE x25 1 1/4 x1 42.4x , x25 1 1/2 x1 48.3x , x32 1 1/2 x1 1/4 48.3x , x25 2 x1 60.3x , x32 2 x1 1/4 60.3x , x40 2 x1 1/2 60.3x , B6 65x32 2 1/2 x1 1/4 76.1x , B7 65x40 2 1/2 x1 1/2 76.1x , B8 65x50 2 1/2 x2 76.1x , A8 80x50 3 x2 88.9x , AB 80x65 3 x 2 1/2 88.9x , C8 100x50 4 x x , CB 100x65 4 x 2 1/ x , CA 100x80 4 x x , HC 125x100 5 x x , KA 150x80 6 1/2 O.D x x , KC 150x /2 O.D x x , EC 150x100 6 x x , MC 200x100 8 x x , MK 200x150 8 x6 1/2 O.D 219.1x , ME 200x150 8 x x ,89 6
7 300 CAP CALOTTA BOUCHON , / , / , , B / , A , C , H , K /2 O.D , E , M , N , Q , ADAPTOR FLANGE FLANGIA ADATTATRICE BRIDE D ADAPTATION , / , / , , B / , A , C , H , K /2 O.D , E , M , N , Q ,37 7
8 8 - Polígono Industrial AGURAIN Tel.: Fax: SALVATIERRA (Alava) SPAIN export@atusa.es
COUPLINGS AND GROOVED FITTINGS
COUPINGS AND GROOVED FITTINGS ASTM A 536 / DUCTIE CAST IRON / GHISA SFEROIDAE / FONTE DUCTIE Product manufactured in ductile cast iron in accordance with ASTM A grade 65-45-12 with polymeric gasket in
RACCORDI IN GHISA MALLEABILE MALLEABLE CAST IRON FITTINGS
RACCORDI IN GHISA MALLEABILE QUALITY APPLICAZIONE: Sanitario, riscaldamento ed impianti gas, raffreddamento ed aria condizionata, impianti antincendio ecc... APPLICATION: Sanitary, heating and gas installation,
Flange Pneurop - ISO Pneurop ISO Flanges
Flange Pneurop - ISO Pneurop ISO Flanges 1 - Griffa Claw grip 2 - Anello centraggio Centering ring 3 - Flangia Flange 4 - Flangia Girevole Rotary flange 5 - Griffa a parete Wall clamp 6 - Parete Wall Utilizzabili
Vanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series
New! Vanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series Raccord à bride / Flange Filetage intérieur / Internal Thread Raccord clamp / Tri-Clamp Raccord à souder / Weld-on ends
DIMENSIONS (mm) holes n Ø DN D K. DIMENSIONS (mm) DNm Dna a h1 h2 m1 m2 n1 n2 b x s C B H I L M TYPE
CRTTERISTICE COSTRUTTIVE / CONSTRUCTION FETURES CRCTERISTICS CONSTRUCTIVS / CRCTERISTIQUES D'EXECUTION Corpo pompa ghisa Pump body cast iron Cuerpo bomba fundición Corps de pompe fonte Supporto motore
Transition Fittings Giunti di transizione price list 2016 listino prezzi 2016
Transition Fittings Giunti di transizione price list 2016 listino prezzi 2016 INDEX INDICE COD PAG GALVANIZED TRANSITION FITTING TO WELD PE100 SDR11 GIUNTO ZINCATO A SALDARE PE100 SDR11 100 10 GAS GALVANIZED
ACCOUPLEMENTS COUPLINGS ASYBCO
ACCOUPLEMENTS COUPLINGS ASYBCO PETROLEUM TANKER PRODUCTS Bayco BAYCO Bayco COUPLINGS RACCORDS BAYCO Adapteur / Adaptor A Raccord / Coupler B Racoord / Shank Coupler C Raccord / Coupler D Adapteur à
Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
The applicable material specifications for ductile iron and rubber gaskets apply:
72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures
B U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
2 START PERKINS POMPE GRUPPO PUMPS GROUP ESEMPIO DI ORDINAZIONE IN CODICE /EXAMPLE OF ORDERING CODE 2SP PRKS - G. Pompe ad ingranaggi Gear pumps
POMPE GRUPPO PUMPS GROUP Pompe ad ingranaggi 2 START A= ESEMPIO DI ORDINAZIONE IN CODICE /EXAMPLE OF ORDERING CODE 2SP A 14 D (H) - 1 G (VT) CILINDRATA cm³/giro DISPLACEMENT c m ³ /rev. Flangia e coperchio
INSTALLATION INSTRUCTIONS LED Canopy Retrofit Kit
INSTALLATION INSTRUCTIONS LED Canopy Retrofit Kit TRMUNV065ECxyyZ TRAUNV065ECxyyZ Installation Instructions subject to change without notice. Page 1 of 8 1.0 INSTALLATION WARNINGS 1. 2. 3. 4. 5. 6. "THIS
Sez. R VILLA VALVOLE. TIPOLOGIE MODELS Pag. 2. Giunti AXILOCK AXILOCK type Pag. 3. Giunti AXIFLEX AXIFLEX type Pag. 5
VILLA VALVOLE Giunti di congiunzione couplings GIUNTI TEEKAY TEEKAY COUPLINGS TIPOLOGIE MODELS Pag. Giunti AXILOCK AXILOCK type Pag. 3 Giunti AXILOCK Fire proof AXILOCK Fire proof Pag. 4 Giunti AXIFLEX
GROPPALLI. Accessori per caldaie a condensazione Fittings for condensing boilers
GROPPALLI Accessori per caldaie a condensazione Fittings for condensing boilers KIT PROLUNGA EXTENSIONS GROPPALLI systems L evoluzione del mercato ha portato Groppalli a sviluppare una gamma completa di
Vanne à manchon pneumatique Type VMC Air operated Pinch Valve type VMC
New! Vanne à manchon pneumatique Type VMC Air operated Pinch Valve type VMC Raccord à bride / Flange Filetage intérieur / Internal Thread Raccord clamp / Tri-Clamp Raccord à souder / Weld-on ends Raccord
GRUVLOK FITTINGS FOR GROOVED-END PIPE
GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These
' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts
.., I.,.,... I I...... I I ',,,, ", Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts ' ; i ',,.) I ' ' ' ' AWWA C Class 50 (3"' ANSI B. Class 5 ("' ANSI B. Class 50 (3"' c@us LISTED
Product Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
AIR WORK FLOW REGULATORS / RÉGULATEUR DE DÉBIT REGOLATORI DI FLUSSO Type / Type / Tipo TECHNICAL DATA / DONNÉES TECHNIQUES / DATI TECNICI
IR FOW RUORS RÉUUR ÉI ROORI I FUSSO P N U M I Q U I P M N he flow regulator has the function to regulate the speed of the pneumatic cylinders and they can be: uni-directiona: the regulation is in one way
7 SUBSIDIARIES 70 COUNTRIES 125 MLN MOTOVARIO KEY FIGURES LOGISTIC ITALY HEADQUARTER ITALY PRODUCTION FOUNDATION HOURS ON 24 SQM OF
CORPORATE &PRODUCTS MOTOVARIO KEY FIGURES 1965 FOUNDATION more than 70 COUNTRIES over 600 EMPLOYEES WORLDWIDE PRODUCTION 24 HOURS ON 24 50.000 SQM OF PRODUCTION PBH VSF H B S D M 7 SUBSIDIARIES 125 MLN
STRUKTUR Flexibler PVC-Schlauch mit Textilverstärkung. TEMPERATURBESTÄNDIGKEIT Von -20 C bis +60 C. Bursting Pressure bar *
Refittex Cristallo GB APPLICATIONS AND REGULATIONS Phthalate free hose suitable for food liquids passage without pressure in compliance with the EU Directive Reg.(EU) 10/2011 A-B-C-D2. In compliance with
PVDF-SOLEF. VI ventilatie ventilation ventilation
ventilatie ventilation ventilation HARD BUIZEN PVC - RONDDONKERGRIJS RAL 7011 TUYAUX PVC RIGIDE - RONDGRIS FONCÉ RAL 7011 PIPES U-PVC - ROUNDDARK GREY RAL 7011 L = 5 m L = 5 m, gladde uitvoering Spanningsvrije
Engine/Moteur 1P70FUA
Engine/Moteur 1P70FUA 29 21 9 8 15 1 7 2 19 18 1 24 10 28 6 5 4 14 27 16 2 Ref. No./ Réf. Part No./ No. de pièce Description Désignation 1. 951-1068 Fuel Tank Réservoir d essence 2. 951-1069 Flywheel Shroud
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable
In this kit there should be: 1 x Engine Case Cover (ECC0085) 2 x M6x28mm long button head bolts PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING
FITTING INSTRUCTIONS FOR ECC0085 LHS WATER PUMP COVER TO FIT ALL WATER COOLED DUCATI S REMOVE REMOVE In this kit there should be: 1 x Engine Case Cover (ECC0085) 2 x M6x28mm long button head bolts PLEASE
Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
just the right angle
Lap out 3451 just the right angle cutting edge solid sentry Lap out 3451 LAP OUT 3451 Anatomy PROJECT PROJET ORDERING SPECIFICATION SPÉCIFICATION DE COMMANDE CODE SPEC TYPE NOTES MODEL MODÈLE 3451 3451
valvole unidirezionali one-way valves
La FOR rafforza la propria gamma prodotti con l introduzione delle valvole unidirezionali. Tali valvole permettono il libero passaggio in un solo senso (quello indicato dalla freccia) e lo impediscono
UNITED BRAND FITTINGS
UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged
Sez. R VILLA VALVOLE. TIPOLOGIE MODELS Pag. 2. Giunti AXILOCK AXILOCK type Pag. 3. Giunti AXIFLEX AXIFLEX type Pag. 5
Giunti di congiunzione Pipe couplings GIUNTI TEEKAY TEEKAY COUPLINGS TIPOLOGIE MODELS Pag. 2 Giunti AXILOCK AXILOCK type Pag. 3 Giunti AXILOCK Fire proof AXILOCK Fire proof Pag. 4 Giunti AXIFLEX AXIFLEX
- D /02/01 SÉP/TAB (D-4) SEC (D04) PAGE
SÉP/TAB (D-4) SEC (D04) PAGE 1 SILENCIEUX POUR TRACTEURS CASE MUFFLERS FOR CASE TRACTORS SÉP/TAB (D-4) SEC (D04) PAGE 2 SÉP/TAB (D-4) SEC (D04) PAGE 3 SÉP/TAB (D-4) SEC (D04) PAGE 4 SÉP/TAB (D-4) SEC (D04)
CYLINDERS ISO CZ SERIES VERINS ISO SERIE CZ CILINDRI ISO SERIE CZ. Stroke / Course / Corsa 03 Ø Cylinder / Ø Vérin / Ø Cilindro
- CZ SERIES - SERIE CZ - SERIE CZ The cylinders of the CZ series are produced complying with the ISO 15552 norm; they have bores comprised between 32 and 125 mm. Particularly indicated where precision
VINKAIR. IV buizen tuyaux pipes
buizen tuyaux pipes BUIZEN LICHTBLAUW NF A 571 TUYAUX BLEU CLAIR NF A 571 PIPES LIGHT BLUE NF A 571 L = 4m gladde uiteinden bouts lisse butt ends Dxs DN PN KG/M /M 16 x 1,8 10 12.5 0.106 3.72 20 x 2,3
HM, HMK, HMC, HMN. Horizontal Multistage Centrifugal Pumps, 50Hz
M, MK, MC, MN orizontal Multistage Centrifugal Pumps, 5z General Data Performance range page 5 Applications M - MK 6 Pump M - MK 6 Operating Conditions M - MK 6 Pipe Connections 6 Liquids to be pumped
Solid Clamps Raccords orientables
Solid Clamps Raccords orientables Versions: Raccords orientables Éléments monoblocs Pour un montage plus rapide et économique Série industrie Fonte d aluminium Grande diversité Éléments monoblocs Éléments
PVC. I - 5. lijmfittings raccords à coller fittings for solvent welding BOCHTEN 90 COURBES A 90 BENDS 90 KNIEËN 90 COUDES A 90 ELBOWS 90
BOCHTEN 90 COURBES A 90 BENDS 90 Beide zijden lijmmof. Andere diameters op aanvraag. Deux côtés femelles à coller. Autres diamètres sur demande. Sockets for solvent welding. Other diameters on request.
Advantages of Grooved Fittings
Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
UNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
SKU: DR4306. Fixed Orifice Double Regulating Valve
SKU: DR4306 VOLT Fixed Orifice Double Regulating Valve 1/2" - 2" Brass Double Regulating Valve with Test Points 1/2" - 2" Messing Doppelregelventilmit Testpunkte 1/2" - 2" Latón Doble Válvula reguladora
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
Standard Dimension Ratio: SDR = 2 S + 1 = D. L = 5 m, andere lengten op aanvraag Volgens DIN 8077/78 type 1 ; ISO R161/1-1978
buizen tuyaux pipes PP-H HARD DRUKBUIS PVC - GRIJS DONKERGRIJS RAL 7032 RAL 7011 TUYAUX PVC RIGIDE PRESSION GRIS FONCÉ - GRIS RAL 7011 7032 U-PVC PRESSURE PIPE DARK - GREY GREY RAL RAL 7032 7011 S= 1/2
DICHIARAZIONE CE EC DECLARATION
www.omcsrl.com DICHIARAZIONE CE EC DECLARATION DataDate: OMC s.r.l. - Via Galileo Galilei, 18-20060 - Cassina dé Pecchi (MI) - ITALY Dichiara che le valvole a globo Declare that the globe valves Tipo -
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
Cristallo Extra. STRUCTURE Flexible PVC hose without reinforcement. WORKING TEMPERATURE From -20 C to +60 C
Cristallo Extra GB APPLICATIONS AND REGULATIONS Hose for food liquids transport without pressure, in compliance with the European regulation Reg. (EU) 10/2011, for simulants A, B and C. In compliance with
175/70r14 84T TR-Ice /70r14 84T Sisteron ,5 150 / /65r14 86T TR-Ice
TECHNICAL INFORMATION inch mm size pattern rim tread width overall width diameter N studs 145/r10 69S M+S 4 4.5 5 119 135 497 120 145r13 Burzet 4 5.0 5.5 107 145 587 216 / 270 155/70r13 TRIce 4 4.5 5 112
WATER INSTALLATION INSTALLATIONS D EAU WATER INSTALLATION INSTALLATIONS D EAU. Rubber tube Tube caoutchout
WATER INSTALLATION INSTALLATIONS D EAU WATER INSTALLATION INSTALLATIONS D EAU Rubber tube Tube caoutchout Connection flexible pipe Raccordement pour tuyau flexible Cod. 30596 Connection 7/7 mm. Cod. 30004
Irrigation. Irrigazione. Irrigazione. Price List TO-S
Irrigation Irrigation Irrigazione Irrigazione Price List TO-S112-2013 1 Index - Indice Pag Small Fittings Piccola raccorderia 3 Poly drip line fittings Raccorderia per ala gocciolante 4 Tape fittings with
FIG Gruvlok Flange Adapter
FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method
valvole ad azionamento pneumatico
Valvole a spola /-5/-5/ con attacchi filettati G/8 -G/4 /-5/-5/ spool valves with G/8 -G/4 threaded ports Montaggio in linea, su collettori multipli o su basi manifold (pag. 9-0) Installation in-line,
VersaWall SlimLine 1750
Index Stick built curtain wall 1 3/4"(44.5mm) profile Mur rideau avec profilé de 1 3/4"(44.5mm) Capped Couvercles à enclenchement Primary components - back sections Composantes principales - traverses
Precision VISES. Serie di Parallele per fresatura Set of precision parallels Parallelunterlagen Assortiments de cales de fraisage appairées
INDICE INDEX INHALT SOMMAIRE 25 Precision VISES Morse modulari di precisione High precision modular vises Präzisions-Schraubstöcke Étaux de fraisage de précision 1 Morse a macchina Machine vises Maschinenschraubstöcke
INSTALLATION INSTRUCTIONS LED RETROFIT ASSEMBLY (LRA) Rev F
SAFETY S IMPORTANT SAFETY INFORMATION SUITABLE FOR DRY OR DAMP LOCATIONS. NOT FOR USE WITH PHASE CUT DIMMERS. Risk of shock. Disconnect power before installation. DANGER CONVIENT AUX EMPLACEMENTS HUMIDES.
Beide zijden cylindrische binnendraad. Deux côtés femelles à filetage cylindrique. Both ends with interior parallel threads.
KNIEEN 90 COUDES 90 ELBOWS 90 Beide zijden cylindrische binnendraad. Deux côtés femelles à filetage cylindrique. Both ends with interior parallel threads. R L Z E /ST/PC GFV 3/8 11.4 13 23.5 1.83 1/2 15.0
Grinnell Grooved Fire Protection Products Grooved Fittings
Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical
01 Manillas y tiradores encastrables Flush levers & sliding door pull handles Garnitures de portes coulissantes. Material: AISI 304
for doors 01 Manillas y tiradores encastrables Flush levers & sliding door pull handles Garnitures de portes coulissantes Material: i-4500 cod. backset 53105 70 1 universal design 90 R2,5 180 Incluye
valvole VDMA 18 mm azionamento pneumatico
valvole VDMA 18 mm azionamento pneumatico pneumatically piloted valves - VDMA 18 mm Valvole a spola 5/-5/3 5/-5/3 spool valves A norma VDMA 4563 - taglia 0 (18 mm) Compliant to norm VDMA 4563 - size 0
Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications
82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal
THOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101
GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 Available Sizes 1" through 12" (25 through ) Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE
4 FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE Typ/Type CS-VE/CS-EP PN 10/10 AUS GLASFASERVERSTÄRKTEM VINYLESTERHARZ (VE) ODER
valvole 16 mm ad azionamento pneumatico
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
Installation Instructions
at :: rangehoods. com Call 1-800-667-8721 anywhere in the US and Canada - www.rangehoods.com Installation Instructions ZV950 36" Stainless Steel Vent Hood Monogram. We bring good things to life. GE Monogram
SW NON STANDARD. Français English
SW NON Français English 2013 L'INOX DANS LE BÂTIMENT BUILDING WITH STAINLESS STEEL EXPO INOX industrie leader dans la réalisation de produits en acier inox avec des solutions techniques et pour satisfaire
INSTALLATION, OPERATION, and MAINTENANCE GUIDE NIBCO Wall Mount Indicator Posts Series NIP-2AW
INSTALLATION, OPERATION, and MAINTENANCE GUIDE NIBCO Wall Mount Indicator Posts Series NIP-2AW PATENT #US 9,541,218 NIBCO Series NIP-2AW Wall Mount Indicator Posts are designed and manufactured to: Operate
FEDERATION INTERNATIONALE DE L AUTOMOBILE
FEDERATION INTERNATIONALE DE L AUTOMOBILE Date 30.11.2015 FICHE DE PRESENTATION DES SYSTEMES D EXTINCTION FIXES (NORME FIA 8865-2015) PRESENTATION FORM FOR PLUMBED-IN FIRE EXTINGUISHER SYSTEMS (FIA STANDARD
UNIVERSAL WHEEL TRIMS COPRICERCHI UNIVERSALI
COPRICERCHI UNIVERSALI 129 WHEEL COVERS FARAD is present on the trade from more than 30 years, with the widest range of wheel trims in Europe, establishing as one of the trade leaders. THE products are
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
TUBI IN PE, PP, PVC, GHISA E ACCIAIO PIPES IN PE, PVC, DUCTILE CAST IRON AND STEEL
TUBI IN PE, PP, PVC, GHISA E ACCIAIO PIPES IN PE, PVC, DUCTILE CAST IRON AND STEEL CATALOGO LISTINO 2019 / Catalog List 2019 TUBI PVC PER EDILIZIA - TUBI RIGIDI PER SCARICO ACQUE PVC TUBES FOR CONSTRUCTION
Fitting Instructions for SRG0034 Radiator Guard Radiator Guard KAWASAKI VERSYS
Fitting Instructions for SRG0034 Radiator Guard Radiator Guard KAWASAKI VERSYS 650 2015- In This Kit There Should Be 1x Radiator Guard. 1x Spacer. 1 x M6 Bolt. 1x M6 Nut and Washer. 6 x Cable/Zip Ties.
Installation Instructions
Installation Instructions If you have questions, call 800.GE.CARES or visit our website at: www.monogram.com ZV950 36" Stainless Steel Vent Hood Safety Information BEFORE YOU BEGIN Read these instructions
BOLT 3544 ANATOMY BOLT SPECIFICATIONS LIGHT SOURCE MODULE MODULE LUMENS PER FOOT DELIVERED LUMENS FIXTURE WATTAGE 40.3W 40.
Bolt 3544 / 744 ANATOMY Anatomy ANATOMY BOLT BOLT 3544 Anatomy ANATOMY BOLT BOLT 744 DISCREET MOUNTING Must be installed to Mini Junction box 3890 or 39B or J-box with accessory 3984. EASY INSTALLATION
SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
UB-2 2 Universal Button
UB-2 2 Universal Button UB-2/LTUL Universal Button with Latching Timer ADA Compliant For UB-2/LTUL the enclosed timer is to be used and installed per the enclosed LT-1UL installation sheet. For access
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
S E N S O R E S E N S O R E Sensor Taps Robinets Capteur 2
SENSORE SENSORE SENSORE Sensor Taps Robinets Capteur 2 SENSORE SENSORE Sensor Taps Robinets Capteur 151 154 123 E1700 127 50 MAX - 35 DATI TECNICI Pressione di lavoro: 1,5 -> 8 BAR Temperatura acqua:
Lumination TM LED Luminaire RC/LRC/RX/LRX Series - New Construction Frame
Installation Guide Lumination TM LED Luminaire RC/LRC/RX/LRX Series - New Construction Frame BEFORE YOU BEGIN Read these instructions completely and carefully. RISK OF ELECTRIC SHOCK Turn power off before
IN ACCIAIO INOX AD INNESTO AUTOMATICO E ACCESSORI
N O X INOX Serie/Series RORDI IN IIO INOX D INNESTO UTOMTIO E ESSORI STINESS STEE PUSH-IN FITTINGS ND ESSORIES aratteristiche Tecniche / Technical haracteristics Materiali e omponenti / omponent Parts
d z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
Stainless Steel SS001D
SS001D Price List: Effective Date: June 1, 2004 Replaces: May 1, 2000 Stainless Steel INDEX Type 304, 150 Lbs. / Genre 304, 150 Lbs... 2 Type 316, 150 Lbs. / Genre 316, 150 Lbs... 3 Type 304 Stainless
ThermaWall 2600 Primary components - back sections Composantes principales - traverses ou meneaux
Primary components - back sections Composantes principales - traverses ou meneaux CAPPED DOUBLE GLAZED SYSTEM MULLIONS MENEAUX DU SYSTÈME À COUVERCLES À ENCLENCHEMENT ET À DOUBLE VITRAGE 25759 25754 25774
GOOD DESIGN INTEGRATED SOLID ALUMINUM HEATSINK
Lap 35 INTEGRATED SOLID ALUMINUM HEATSINK ADA compliant, Elegant design, even indirect light distribution Energy efficient white LED lighting, dimming available GOOD DESIGN Anatomy LAP CHROME DRIVER BOX
Informations générales modèles 60 HZ et 50 HZ MACHINES MOTEURS
CHARGE UTILE POIDS CABLAGE ROPES WEIGHT SUSPENSION ROPING Informations générales modèles 0 HZ et 0 HZ équilibré 0%. 0% balanced. hors de l'équilibre, proportionnel à la charge et pour 21 m de course..
UNITED BRAND FITTINGS
NFF0711 UNITED DUCTILE IRON CLASS 0 FLANGED FITTINGS UNITED BRAND FITTINGS AWWA C1, ANSI A21. Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality
FEDERATION INTERNATIONALE DE L AUTOMOBILE
FEDERATION INTERNATIONALE DE L AUTOMOBILE 06.03.2017 FICHE DE PRESENTATION DES SYSTEMES D EXTINCTION FIXES (NORME FIA 8865-2015) PRESENTATION FORM FOR PLUMBED-IN FIRE EXTINGUISHER SYSTEMS (FIA STANDARD
Sujet / Subject Modification de design des bouchons MIL-DTL séries III, RJFTV, USBFTV et RJ11FTV.
Avis de Modification Produit / Process Product / Process Change Notification Nb de pages / No. of pages 10 Référence / Reference PCN 115843 Date de Diffusion / Issue Date March 2017 10/03/17 Familles Produit
X30 ROOKIE 60cc FEATURES - CARACTERISTIQUES. Cylinder volume Volume du cylindre cm³. Bore Alésage mm
X30 ROOKIE 60cc FEATURES - CARACTERISTIQUES Cylinder volume Volume du cylindre 59.45 cm³ Bore Alésage 41.81 mm Max. theoretical bore Alésage théorique max. 42.00 mm Stroke Course 43.30 mm Cooling system
Index. Primary components - back sections Composantes principales - traverses ou meneaux
Thermally broken Split mullion curtain wall - Capped and SSG 2 /2" (63.5mm) profile. Available in 5 /4"(33.4mm) and 6 5/8"(68.3mm) depths. Mur-rideau à meneaux en deux sections avec bris thermique.vss
INSTALLATION INSTRUCTIONS MOONRING 1 LP1/MR1
INSTALLATION INSTRUCTIONS MOONRING 1 LP1/MR1 Suspended, Ceiling LED n A 1035 22nd Avenue, Unit 1 Oakland, CA 94606 P 510.489.2530 E TalkToUs@alwusa.com W alwusa.com Safety & Warnings! 1. Read all instructions.
Model 7706 Reducing Coupling. Deg. Axial Displacement
MODEL 7706 REDUCING COUPLING The Model 7706 Reducing allows direct reduction on a piping run and eliminates the need for a concentric reducer and couplings. The specially designed rubber gasket prevents
BULLETIN DE DIFFÉRENCIATION DES PRODUITS IPD Mai 2011
BULLETIN DE DIFFÉRENCIATION DES PRODUITS IPD Mai 2011 Différenciation IPD : Produits IPD pour moteurs Caterpillar série «C» IPDDB-0013 Le tableau suivant illustre la large gamme de pièces détachées d IPD
030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50
030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 Pipe Fitter Handbook Another Anvil Advantage Mini-catalog Installation Procedures Technical Data Copyright 2001 by Anvil International, Inc.
ROND DONKERGRIJS RAL 7011 ROND GRIS FONCÉ RAL 7011 ROUND DARK GREY RAL 7011
ventilatiebuizen tuyaux de ventilation ventilation pipes ROND DONKERGRIJS RAL 7011 ROND GRIS FONCÉ RAL 7011 ROUND DARK GREY RAL 7011 Volgens ISO standaard. L = 5 m, gladde uitvoering. Andere lengten, kleuren
MOONRING 1.5 MOONRING 3
INSTALLATION INSTRUCTIONS MOONRING 1.5 MOONRING 3 MR1.5 & MR3 Suspended, Ceiling LED n A 1035 22nd Avenue, Unit 1 Oakland, CA 94606 P 510.489.2530 E TalkToUs@alwusa.com W alwusa.com Safety & Warnings!
ABB France 3 rue Jean Perrin CS CHASSIEU Cedex FRANCE. Eppelheimer Str HEIDELBERG - ALLEMAGNE. Contacteur Contactor
LCIE N : Titulaire : License Holder: Site de fabrication : Factory: ABB France 3 rue Jean Perrin CS 90009 69687 CHASSIEU Cedex FRANCE ABB STOTZ KONTAKT GmbH Eppelheimer Str. 82 69123 HEIDELBERG - ALLEMAGNE
UDG sewage fittings PVC-U
NON-RETURN VALVES UDG SEWAGE FITTINGS UDG sewage fittings PVC-U 2015 183 MECHANICAL SADDLES UDG sewage fittings PVC-U A complete range of fittings for underground drainage Redi offers complete drainage
Plan de présentation CSITC RT
Explication du test interlaboratoires international du CSITC Dernières évolutions et Démarche qualité du LTC Jean-Paul GOURLOT Formation en technologie cotonnière Afrique Francophone du 14 au 25/10/2013
Steel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection