Beide zijden cylindrische binnendraad. Deux côtés femelles à filetage cylindrique. Both ends with interior parallel threads.
|
|
|
- Flora Carpenter
- 5 years ago
- Views:
Transcription
1 KNIEEN 90 COUDES 90 ELBOWS 90 Beide zijden cylindrische binnendraad. Deux côtés femelles à filetage cylindrique. Both ends with interior parallel threads. R L Z E /ST/PC GFV 3/ / / / / / KNIEEN 45 COUDES 45 ELBOWS 45 Alle zijden cylindrische binnendraad. Deux côtés femelles à filetage cylindrique. All ends with interior parallel threads. R L Z E /ST/PC HFV 1/ / / / / I - 29
2 T-STUKKEN 90 TES A 90 TEES 90 Alle zijden cylindrische binnendraad. Trois côtés femelles à filetage cylindrique. All ends with interior parallel threads. R L Z E /ST/PC TFV 3/ / / / / / DRIEDELIGE KOPPELINGEN RACCORDS-UNIONS 3 PIECES SOCKET UNIONS Beide zijden cylindrische binnendraad. Afdichting : O-ring EPDM. Ook leverbaar met FPM-ring : zie hoofdstuk VII Toebeoren. Deux côtés femelles à filetage cylindrique. Etanchéïté : joint torique EPDM. Egalement disponible avec joint torique FPM : voir chapitre VII Accessoires. Both ends with interior parallel threads. Sealing : O-ring EPDM. Also available with FPM ring : see chapter VII Accessories. R R1 H L Z E /ST/PC BFV 3/8 3/ / /4 1 1/ / / /2 2 1/ / I - 30
3 WARTELMOEREN ECROUS FILETES NUTS R 1 PN d H E /ST/PC EFV 3/ / / / / / / / / WARTELMOEREN ECROUS FILETES NUTS R H K /ST/PC JFV 1/ / / / I - 31
4 SOKKEN MANCHONS DOUBLE SOCKETS Beide zijden cylindrische binnendraad. Deux côtés femelles à filetage cylindrique. Both ends with interior parallel thread. R L Z E K /ST/PC MFV 3/ / / / / / NIPPEL MAMELON DOUBLE NIPPLE Beide zijden cylindrische buitendraad. Deux côtés mâles à filetage cylindrique. Both ends with exterior parallel thread. Fig. R E L K H G/ST/PC /ST/PC NFV - Fig. A A 3/ A 1/ A 3/ A A 1 1/ A 1 1/ A B *2 1/ B * B * * PN 16 met gereduceerde veiligheidsfactor * PN 16 avec un facteur de sécurité réduit * PN 16 with reduced safety factor NFV - Fig. B I - 32
5 VERMINDERINGSSTUKKEN REDUCTIONS REDUCERS Eén zijde cylindrische binnendraad, andere zijde cylindrische buitendraad. Un côté femelle et un côté mâle à filetage cylindrique. One end with interior threads, the other end with exterior parallel threads. R x R 1 L 1 L H E K TYPE /ST/PC RFV 1/2 x 3/ A /4 x 3/ A /4 x 1/ A x 3/ A x 1/ A x 3/ A /4 x 1/ A /4 x 3/ A /4 x A /2 x 1/ A /2 x 3/ A /2 x A /2 x 1 1/ A x 3/ A x A x 1 1/ A x 1 1/ A /2 x B x B x 2 1/ B x B VERMINDERINGSSTUKKEN REDUCTIONS REDUCERS Met uitwendige en inwendige cylindrische draad. Mâle et femelle à filetage cylindrique. One end with interior parallel threads, other end with exterior parallel threads. R 1 x R L L 1 H K /ST/PC IFFV 1/2 x 3/ /2 x /4 x x 1 1/ /4 x 1 1/ /2 x x 2 1/ /2 x x I - 33
6 VERMINDERINGSNIPPELS MAMELONS DE REDUCTION REDUCING BARREL NIPPELS Beide zijden uitwendige cylindrische draad. Deux côtés mâle à filetage cylindrique. Both ends with exterior parallel thread. R x R 1 L L 1 H K /ST/PC NRFV 1/2 x 3/ /4 x x 1 1/ /4 x 1 1/ /2 x x 2 1/ /2 x x VERMINDERINGSBUSSEN DOUILLES DE REDUCTION REDUCING BUSHES Met cylindrische binnen- en buitendraad. Mâle et femelle à filetage cylindrique. Interior and exterior parallel thread. R x R 1 L L 1 Z H E K /ST/PC DFV 1/2 x 3/ /4 x 1/ x 3/ /4 x /2 x 1 1/ x 1 1/ I - 34
7 DRAADSTOPPEN BOUCHONS MALE MALE PLUGS Met cylindrische buitendraad. Mâle à filetage cylindrique. Exterior parallel threads. R L H E K TYPE /ST/PC PFV 3/ A / A / A A / A / A A / B B B AFSLUITKAPPEN BOUCHONS END CAPS Met cylindrische binnendraad. Femelle à filetage cylindrique. Interior parallel thread. R L H K /ST/PC CFV 3/ / / / / I - 35
8 SLANGPILAREN EMBOUTS CANNELES HOSE ADAPTORS Met cylindrische buitendraad. Mâle à filetage cylindrique. Exterior parallel thread. P 1 x P 2 x R L H /ST/PC AFV 12 x 14 x 1/ x 18 x 3/ x 22 x 1/ x 27 x 3/ x 32 x x 42 x 1 1/ x 52 x 1 1/ x 64 x SLANGPILAREN EMBOUTS CANNELES HOSE ADAPTORS Aansluiting met wartelmoer met cylindrische binnendraad. Afdichting : vlakke EPDM-ring of FPM. Raccordement par écrou femelle à filetage cylindrique. Etanchéïté : joint plat EPDM ou FPM. ADV With parallel threaded nut connection. Flat seal : EPDM or FPM. P 1 x P 2 x R L H /ST/PC 12 x 14 x 1/ x 18 x 3/ x 22 x x 27 x 1 1/ x 32 x 1 1/ x 42 x x 52 x x 52 x 2 1/ x 64 x 2 1/ x 64 x 2 3/ I - 36
PVC. I - 5. lijmfittings raccords à coller fittings for solvent welding BOCHTEN 90 COURBES A 90 BENDS 90 KNIEËN 90 COUDES A 90 ELBOWS 90
BOCHTEN 90 COURBES A 90 BENDS 90 Beide zijden lijmmof. Andere diameters op aanvraag. Deux côtés femelles à coller. Autres diamètres sur demande. Sockets for solvent welding. Other diameters on request.
VINKAIR. IV buizen tuyaux pipes
buizen tuyaux pipes BUIZEN LICHTBLAUW NF A 571 TUYAUX BLEU CLAIR NF A 571 PIPES LIGHT BLUE NF A 571 L = 4m gladde uiteinden bouts lisse butt ends Dxs DN PN KG/M /M 16 x 1,8 10 12.5 0.106 3.72 20 x 2,3
Technische specificaties Durapipe ABS : Gebruikstemperatuur : -40 tot +70 C. Spécifications techniques du Durapipe ABS :
technische kenmerken caractéristiques techniques technical properties Durapipe, het materiaal dat uitermate geschikt is voor de distributie van ijswater, glycolwater, koudedragers, drinkbaar water en proceswater.
Standard Dimension Ratio: SDR = 2 S + 1 = D. L = 5 m, andere lengten op aanvraag Volgens DIN 8077/78 type 1 ; ISO R161/1-1978
buizen tuyaux pipes PP-H HARD DRUKBUIS PVC - GRIJS DONKERGRIJS RAL 7032 RAL 7011 TUYAUX PVC RIGIDE PRESSION GRIS FONCÉ - GRIS RAL 7011 7032 U-PVC PRESSURE PIPE DARK - GREY GREY RAL RAL 7032 7011 S= 1/2
ROND DONKERGRIJS RAL 7011 ROND GRIS FONCÉ RAL 7011 ROUND DARK GREY RAL 7011
ventilatiebuizen tuyaux de ventilation ventilation pipes ROND DONKERGRIJS RAL 7011 ROND GRIS FONCÉ RAL 7011 ROUND DARK GREY RAL 7011 Volgens ISO standaard. L = 5 m, gladde uitvoering. Andere lengten, kleuren
HDPE/PP-H. VI ventilatiebuizen tuyaux de ventilation ventilation pipes ROND GRIJS RAL 7032 ROND GRIS RAL 7032 ROUND GREY RAL 7032
ventilatiebuizen tuyaux de ventilation ventilation pipes HDPE/PP-H ROND ROND ROUND ZWART NOIR BLACK Afmetingen zijn niet volgens DIN 8074/75 Bij deze buizen bestaat het gevaar dat, tijdens het transport,
PVDF-SOLEF. VI ventilatie ventilation ventilation
ventilatie ventilation ventilation HARD BUIZEN PVC - RONDDONKERGRIJS RAL 7011 TUYAUX PVC RIGIDE - RONDGRIS FONCÉ RAL 7011 PIPES U-PVC - ROUNDDARK GREY RAL 7011 L = 5 m L = 5 m, gladde uitvoering Spanningsvrije
ACCOUPLEMENTS COUPLINGS ASYBCO
ACCOUPLEMENTS COUPLINGS ASYBCO PETROLEUM TANKER PRODUCTS Bayco BAYCO Bayco COUPLINGS RACCORDS BAYCO Adapteur / Adaptor A Raccord / Coupler B Racoord / Shank Coupler C Raccord / Coupler D Adapteur à
Stainless Steel SS001D
SS001D Price List: Effective Date: June 1, 2004 Replaces: May 1, 2000 Stainless Steel INDEX Type 304, 150 Lbs. / Genre 304, 150 Lbs... 2 Type 316, 150 Lbs. / Genre 316, 150 Lbs... 3 Type 304 Stainless
Vanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series
New! Vanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series Raccord à bride / Flange Filetage intérieur / Internal Thread Raccord clamp / Tri-Clamp Raccord à souder / Weld-on ends
Vanne à manchon pneumatique Type VMC Air operated Pinch Valve type VMC
New! Vanne à manchon pneumatique Type VMC Air operated Pinch Valve type VMC Raccord à bride / Flange Filetage intérieur / Internal Thread Raccord clamp / Tri-Clamp Raccord à souder / Weld-on ends Raccord
ISO-BSP FITTINGS PVC-U. Adaptor fittings
ISO-BSP FITTINGS PVC-U Adaptor fittings FITTINGS ISO-BSP Series of fittings designed for conveying fluids under pressure with threaded and solvent weld cold chemical jointing systems (solvent welding)
SHERWOOD. collection collection
SHERWOOD collection collection Sherwood collection A collection of wood poles available in the 30 and 20mm in a large pallet of wood natural colours and some contemporary finishes which combine perfectly
catalogue produits products catalogue
catalogue produits products catalogue S.A.S MAUBEUGE FRANCE Major European manufacturer of pipe fittings for endusers, stockists and package specialists worldwide Carbon Steel High Yield Stainless Steel
VERSION 2. PVC FITTINGS & VALVES Technical Catalogue
VERSION 2 PVC FITTINGS & VALVES Technical Catalogue INTRODUCTION Plasson s innovative products revolutionized the way of connecting polyethylene pipes in the 1960 s. We started with fittings for agricultural
LISTE DES PIÈCES DE RECHANGE
LISTE DES PIÈCES DE RECHANGE Mar 2017/ Mars 2018 48-S 174 48-R 524 48-R 522 48-S175 48-S 174 48-S 175 48-R 526 48-S 174 48-R 523 48R522 48R523 48S174 48S175 48R524 48R526 SCREEN-PRINTED PANEL PANNEAU IMPRIMÉ
standard and industrial pipe fittings
fittings mm sizes standard and industrial pipe fittings Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings from 6 bars to 16 bars,
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-3 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty
Product Parts Information
Product Parts Information BOP Hydraulic Hoist System BS40LC2H4P3ER7M19-E/891052 / 47522968001 Save These Instructions Form Edition A February 2015 2015 Ingersoll-Rand PARTS ORDERING INFORMATION These products
VÁLVULA BOLA BALL VALVE VANNE À BOULE
VANNE À BOULE www.inoxpa.com ÍNDICE / INDEX VÁLVULA BOLA VANNE À BOULE Conexiones / Connections / Connexions: DIN 11850 (Serie2) 4 DIN 11851 5 OD 9 SMS 12 ACCIONAMIENTO MANUAL MANUAL DRIVE COMMANDE MANUELLE
FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE
4 FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE Typ/Type CS-VE/CS-EP PN 10/10 AUS GLASFASERVERSTÄRKTEM VINYLESTERHARZ (VE) ODER
PRESSFITTING AND PIPING
2015 PRESSFITTING AND PIPING Pressfitting systems for heating, sanitary and industrial applications Pressfittingssysteme für Heizung-, Sanitär- und Industriebereiche Raccords à sertir pour applications
Gyspot BP / PTI. When you change the arm
Gyspot BP / PTI Maintenance procedure of the machine Periodic maintenance table Action When you change the arm Every month Every months Every years Every 00 points a. Lubricate Contact X b. Check the tightness
NEISCO. Neisco For Modern Waters Systems Production NEISCO
NEISCO Head Office: Borg El Mohandessen 4/51, Post code 11371Rabaa El adawia Nasr City - Cairo - Egypt Tel.: (+202) 240 18412-226 05695-240 51884 Fax: (+202) 22629718 Factory: Badr industrial City zone
INNESTI RAPIDI QUICK FITTINGS EMBOUTS RAPIDES KUPPLUNGSSTECKER
INNESTI RAPIDI QUICK FITTINGS EMBOUTS RAPIDES KUPPLUNGSSTECKER 2Raccorderia Fittings INNESTI RAPIDI CON PROFILO INTERNAZIONALE QUICK FITTINGS WITH INTERNATIONAL PROFILE RACCORDS RAPIDES AVEC PROFIL INTERNATIONAL
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-3 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty
COUPLING CATALOGUE. Push-in and Composite Building Block
COUPLING CATALOGUE Push-in and Composite Building Block COUPLING CATALOGUE: PUSH-IN AND COMPOSITE BUILDING BLOCK Part number overview Edition 1 This publication is not subject to change procedures. New
SURFOX D 315 (USA/CANADA/MEXICO)
SURFOX 305 54-D 315 (USA/CANADA/MEXICO) MAR 2018 48R581 48S174 48R580 48S175 48S175 48S174 48S175 48R526 48S174 48R577 48R577 48R580 48S174 48S175 48R581 48R526 SCREEN-PRINTED BASE FOR S305 BASE IMPRIMÉE
WATER INSTALLATION INSTALLATIONS D EAU WATER INSTALLATION INSTALLATIONS D EAU. Rubber tube Tube caoutchout
WATER INSTALLATION INSTALLATIONS D EAU WATER INSTALLATION INSTALLATIONS D EAU Rubber tube Tube caoutchout Connection flexible pipe Raccordement pour tuyau flexible Cod. 30596 Connection 7/7 mm. Cod. 30004
Solid Clamps Raccords orientables
Solid Clamps Raccords orientables Versions: Raccords orientables Éléments monoblocs Pour un montage plus rapide et économique Série industrie Fonte d aluminium Grande diversité Éléments monoblocs Éléments
ABS Pipe metric system Plain PN10
S Pipe metric system Plain PN10 t (mean) Da (min) Size Thickness Weight Length ode t Da mm kg/m m 16 1.5 0.07 3 11 565 305 20 1.6 0.10 3 11 565 306 25 1.9 0.14 3 11 565 307 35 2.1 0.21 3 11 565 308 16
industrial and economy pipe fittings PVC-U Solvent Cement WELD-ON REGULAR 719 Size Code Price 500ml tin
pvcu fittings mm sizes industrial and economy pipe fittings fittings mm sizes 68 Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings
BRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
PVC. Pollet Pool Group 23 HYDROTUBO HYDROTUBO ASTORE FITTINGS GRIFFON GLUE AND ACCESSORIES PVC
23 HYDROTUBO... 282 HYDROTUBO +... 283 ASTORE FITTINGS... 284 GRIFFON GLUE AND ACCESSORIES... 289 Pollet Pool Group 23 281 HYDROTUBO Flexible thermoplastic tube reinforced with polymers for suction and
PROJECTEUR DE THÉÂTRE 650/1000W GX /1000W GX 9.5 THEATRE SPOTLIGHT 306 CODE OP OP DJ PD VI
PROJECTEUR DE THÉÂTRE 650/1000W GX 9.5 650/1000W GX 9.5 THEATRE SPOTLIGHT 306 MNTING DIFFERENT LENSES. OP15030001 OP15010006 DJ40219902 RPAPF00009 FPAGR00003 PD30000003 DJ30223218 DJ40052601 DU40309101
Malleable Iron Pipe Fittings BS EN Patterns Sizes List Prices Prices effective from 1st September 2008 Exclusive of VAT.
Malleable Iron Pipe Fittings BS EN 10242 Patterns Sizes List Prices Prices effective from 1st September 2008 Exclusive of VAT. FM 20478 George Fischer Ltd. Profile of a Company In 1802 Johann Conrad Fischer
FITTINGS PP-H. Fittings, metric series ISO-UNI
FITTINGS for socket welding PP-H Fittings, metric series ISO-UNI FITTINGS for socket welding Series of fittings designed for conveying fluids under pressure with a hot weld connection system (socket welding).
VERSION 3. PVC FITTINGS & VALVES Technical Catalogue
VERSION 3 PVC FITTINGS & VALVES Technical Catalogue INTRODUCTION Plasson s innovative products revolutionized the way of connecting polyethylene pipes in the 1960 s. We started with fittings for agricultural
Doppelmantel-Rorhleitungsteile Jacketed pipes and fittings Elements de tuyauterie D.Enveloppe
Doppelmantel-Rorhleitungsteile Jacketed pipes and fittings Elements de tuyauterie D.Enveloppe 5-Dpm Inhaltverzeichnis / Table of contents / Table des matières Seite Page Bezeichnung / Designation Blatt
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
Pressure Pipes & Fittings
Pressure Pipes & Fittings Description: UPVC and CPVC pipes for hot and cold water supply under pressure. Range: Metric series fromø16 up toø315 mm, Imperial series fromø1/2" up toø1". Pressure Rating:
Volgens / suivant / conform EN ISO Met beschemfolie 2-zijdig / avec film de protection recto-verso / with protection foil on both sided
GEËXTRUDEERDE PLATEN PLAQUES EXTRUDÉES EXTRUDED SHEETS NATUREL NATUREL NATURAL Volgens / suivant / conform EN ISO 15014 L x B s /KG 2000 x 1000 2 77.91 3 77.91 4 77.91 5 77.91 6 77.91 8 77.91 10 77.91
ISO-BSP FITTINGS PVC-C. TemperFIP100 adapter fittings
ISO-BSP FITTINGS PVC-C TemperFIP100 adapter fittings FITTINGS ISO-BSP Series of fittings designed for conveying fluids under pressure with threaded and cold chemical solvent weld jointing systems (solvent
TCU Flushing Manifold and RTD Installation
Instruction Sheet P/N 1614041-01 This instruction is for installing temperature control unit (TCU) flush manifold and RTD assembly onto the heat exchanger for both new systems and existing systems. Follow
MARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
Parts Manual. K1CA Series Hoist/Hoistractor Combination Units. PL86-K1CA December 12, Additional Parts Manuals Required: Hoist: PL86-K1
December 12, 2015 Parts Manual K1CA Series Hoist/Hoistractor Combination Units Additional Parts Manuals Required: Hoist: PL86-K1 Hoistractor: PL86-TRACTOR i December 12, 2015 Table of Contents K1CA Hoist/Hoistractor
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 9974-4 Second edition 2016-12-01 Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 4: Dimensions,
Chapter 1 Pipes and fittings PVC - PE
Chapter 1 Pipes and fittings PVC - PE Solvent weld fittings Threaded connections Ball valves & butterfly valves Page 1-20 Page 21-33 Page 34-37 Slide valves & check valves Solvents & sealants Tools Page
QUALITY EX STOCK. Summary of available products ISSUE 3. Bars Pipes and tubes Fittings Hollow bars Angles Special sections Plates and sheets
QUALITY EX STOCK Summary of available products Bars Pipes and tubes Fittings Hollow bars Angles Special sections Plates and sheets ISSUE 3 STAPPERT The brand for steels. STAPPERT offers a diverse range
INSTALLATION INSTRUCTION Aether 3.5 Color Tunable LED Downlight
SAFETY INSTRUCTION IMPORTANT: NEVER attempt any work without shutting off the electricity. Read all instructions before installing. System is intended for installation by a qualified electrician in accordance
Onderdelenlijst SAF-1500
Onderdelenlijst SAF-1500 Item Amiad SAF-1500 filter parts schedule Revaho art.nr. Item Amiad SAF-1500 filter parts schedule Revaho art.nr. 1 Housing lid A.710103-002116 15.1 L-Connector 8 x 1/4" (PE) 76400-003500
UDG sewage fittings PVC-U
11. UDG SEwAGE FITTINGS UDG sewage fittings PVC-U 2017 197 12. NON-RETURN VALVES 13. MECHANICAL SADDLES A complete range of fittings for underground drainage Redi offers complete drainage solutions starting
UDG sewage fittings PVC-U
NON-RETURN VALVES UDG SEWAGE FITTINGS UDG sewage fittings PVC-U 2015 183 MECHANICAL SADDLES UDG sewage fittings PVC-U A complete range of fittings for underground drainage Redi offers complete drainage
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
Tubes and stiffener sleeves Use of stiffener sleeves
Tubes and stiffener sleeves Use of stiffener sleeves very thick wall thickness not recommended thicker wall thickness decreasing pressure resistance increasing wall thickness ideal wall thickness no stiffener
Fluidizing Pickup Tube Kits
Instruction Sheet P/N 303787-02 Introduction The fluidizing pickup tube kit retrofits your existing mobile powder system with fluidizing air. It injects fluidizing air at the pickup tube inlet with minimal
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
INSTALLATION INSTRUCTIONS PARTS LIST INSTALLATION INSTRUCTIONS AIR CONTROL KIT (800A0168 OR 800A0169)
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS PARTS LIST AIR CONTROL KIT (800A0168 OR 800A0169) Link mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 (712) 722-4874 Fax (712) 722-4876
Wet alarm valves. Wet alarm valves. CE trim
Description Usually, a wet alarm valve station includes: a Rolland wet alarm valve linked to the water motor gong. a set of valves and by pass used to test the system. a drain valve. a test valve gauges
HIT PRODUCTS CORPORATION
17 15 12 10 8 6 4 PROLINE ADJUSTABLE ARC NOZZLES SPANISH Available in 4, 6, 8, 10, 12, 15 and 17 radius Adjustable from 20 to 360 degrees Matched precipitation rates Color coded for easy radius identification
AUTOMATIC AND STANDARD FITTINGS
AUTOMATIC AND STANDARD FITTINGS INDEX AUTOMATIC FITTINGS PAG. 3-12 STANDARD FITTINGS PAG. 13-39 CODE INDEX PAG. 41 2 AUTOMATIC FITTINGS 3 Automatic fittings are normally used for many pneumatic applications.
POLYETHYLENE FITTINGS ELECTROFUSION / SPIGOT
POLYETHYLENE FITTINGS www.egbgroup.com PRICE TABLE 03 / 2018 Table of contents Characteristics HDPE CHARACTERISTICS ADVANTAGES APPLICATION FIELDS CONNECTION METHODS PRICE LIST CERTIFICATE GENERAL CONDITIONS
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-2 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 2: Heavy-duty
Stealth Exhaust 2.0 & Heat Shield
53570 - Stealth Exhaust 2.0 & Heat Shield 18 2 1 15 9 8 7 19 20 21 16 6 10 17 5 14 4 3 13 12 11 Safety Considerations: 1. Wear gloves during installations and be careful when handling the metal pieces
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 1179-1 Second edition 2013-11-01 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 1: Threaded
Pneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
aquakit U Specifications Last revision: 09/07/2016 aquabrass.com
aquakit U-31-040 Specifications Last revision: 09/07/2016 DEMI-TOTEM 12123 1/2 thermostatic valve with 2-way or 3-way diverter - CALGreen High performance 1/2 thermostatic valve European made solid brass
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
Your contact person Mr Tim Snyder. Technical Data
Inclusive adapter DIN M10 30 to connect to felxible shafts Inclusive rebuild set to G 16000 H Powerful machine with centrifugal governor extensions up to 1000 mm Your contact person Mr Tim Snyder 586-776-1480
iberdur INHALTSVERZEICHNIS TABLE OF CONTENTS SOMMAIRE 2.1 EINLEITUNG INTRODUCTION INTRODUCTION 2 / 1
INHLTSRZEIHNIS TLE OF ONTENTS SOMMIRE 2.1 EINLEITUNG INTRODUTION INTRODUTION 2.2 MESSUNGEN DIMENSIONS DIMENSIONS OGEN ELOW OUDE T-STÜK TEE-FITTING TE REDUZIERTES-T-STÜK REDUED-TEE-FITTING TE REDUIT ROHRSTTEL
ANNEAU-SUPPORT DE ROUE/FLUSH RING-SPACE BRACKET
ANNEAU-SUPPORT DE ROUE/FLUSH RING-SPACE BRACKET ANNEAUX ENCASTRÉS - FLUSH RINGS 690-090 690-090 ANNEAU ENCASTER 1200 LIVRES FLUSH RING 1200 LBS 690-095 TIPPER LATCH 690-091 ANNEAU 1/4" AVEC 2 TROUS 700LBS
Fixing systems Systèmes de fixations
Fixing systems Systèmes de fixations Export Nº 36 09 2017 Martigrap is a Spanish family company that develops its industrial activity since 1986 heading the gas sector with the production of gas meter
CPVC HOT & COLD PLUMBING SYSTEM PRICE LIST
CPVC HOT & COLD PLUMBING SYSTEM PRICE LIST With effect from 1st June, 2015 SDR-11 (3 Mtr. Length) (Rate per mtr.) 15 ½ M011110301 100 75.00 20 ¾ M011110302 50 110.00 25 1 M011110303 30 174.00 32 1¼ M011110304
INSERTION Adaptor for analysis
INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion
PVC FOOT VALVE SKU: CV4674
SKU: CV4674 PVC-U Foot Check Valve Socket and BSP PVC-U Fuß Rückschlagventil Sockel und BSP PVC-U Pie válvula de retención del zócalo y BSP PVC-U pied Clapet Socket et BSP PVC Foot Check Valve - Socket
SN SN 600 SN SN 300
SNG 500 - SNG 600 SNU 500 - SNU 600 SNA 500 - SNA 600 SN 500 - SN 600 SN 200 - SN 300 SD 3100 SD 3000 114 DISPOSITIFS D'ÉTANCHÉITÉ - SEALING ARRANGEMENTS Joint en polyuréthane TSNG pour: SNG-SNU TSNG polyurethan
Index. Primary components - back sections Composantes principales - traverses ou meneaux
Thermally broken Split mullion curtain wall - Capped and SSG 2 /2" (63.5mm) profile. Available in 5 /4"(33.4mm) and 6 5/8"(68.3mm) depths. Mur-rideau à meneaux en deux sections avec bris thermique.vss
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6149-1 Second edition 2006-02-15 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated
.09 3.1.0 1.1 1.44 1.71 1.73 1 5 1-70-3.70 1 HOSE ADAPTORS 0.58 0.1 0.70 0.73 0.83 0.85 0.95 0.93 1.03 1.41 1.1 1.71 1.98.0..3.0 3.08 1.3 1.54 0.89 0.91 1.07 1.4 1.7 1.9 1.17.31.30 0.9 0.37 0.7 0.89 1.18
PVC FITTINGS & VALVES
PVC FITTINGS & VALVS Technical Catalogue Distributor of 1 Introuction Plasson s innovative proucts revolutionize the way of connecting polyethylene pipes in the 1960 s. We starte with fittings for agricultural
LZS8WS EZH2O BOTTLE FILLING STATION & COOLER
INSTALLATION, CARE & USE MANUAL TM LZS8WS EZH2O BOTTLE FILLING STATION & COOLER IMPORTANT THIS IS AN INDOOR APPLICATION ONLY. ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON. TOOLS REQUIRED
ONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
JULY Polyethylene Piping Systems.
JULY 205 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
FOR APPROVAL ONLY ; WARNING PARTS TO BE INSTALLED
FOR APPROVAL ONLY REVERSE TRANSMISSION KIT (P/N 860 43 600) ; WARNING For safety reasons, this kit must be installed by an authorized Bombardier snowmobile dealer. Should removal of a locking device be
PST4. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques
81 PST4 FLAT FACE/SCREW VITE VALVOLA PIANA/ACCIAIO FLAT FACE SCREW COUPLINGS/STEEL FLACHDICHTENDE SCHRAUBKUPPLUNGEN/STAHL COUPLEURS FACE PLANE A VISSER/ACIER Nominal size Max working pressure Rated flow
5750 DONAHUE STREET, MONTREAL, QUEBEC. H4S 1C1 TEL.: , FAX:
5750 DONAHUE STREET, MONTREAL, QUEBEC. H4S 1C1 TEL.: 514-336-3820, 800-390-0140 FAX: 514-745-1764 www.airtekltd.com E-MAIL info@airtekltd.com KJ 45S/A 1 713291 1 Head M10 Tête M10 2 71C00281 1 Screw TCEI
WHEEL LOSS. A Risk No One Can Run!
WHEEL LOSS A Risk No One Can Run! Legal deposit Bibliothèque et Archives nationales du Québec, 3rd quarter 2017 ISBN 978-2-550-79695-4 (PDF version) Société de l assurance automobile du Québec, 2017 Original
POMPE MURALE, modèle EOS 02-C85. WALL MOUNTED PUMP, model EOS 02-C85. PUMPE - WANDANLAGE, Modell EOS 02-C85. BOMBA MURAL, tipo EOS 02-C85
Doc. 573.022.050 Date/Datum/Fecha : 22/05/4 Annule/Cancels/ Ersetzt/Anula : 04/03/4 Modif. / Änderung : Ind. / Pos. 2 NC / NS # 44 940 020 Ind. / Pos. 4 NC / NS # 06 390 500 Pièces de rechange Spare parts
upvc PRESSURE AND COMPRESSION FITTINGS
upvc PRESSURE AND COMPRESSION FITTINGS Company Profile Proplastics is the leading supplier of world class plastic pipe systems for water and sewer reticulation in Southern Africa. Established in 1965,
Pyro Deck Gas Deck Ovens
Pyro Deck Gas Deck Ovens models GPD48, GPD60 Phone (US & Canada): 1 800 427 6668 Fax (US & Canada): 1 800 361 7745 www.garland-group.com G_GO_PL_PYRODECK_GPD4860 (Rev 9) Quality Factory Replacement Parts
Schedule 80 PVC Industrial Products & Accessories True Union 2000 Industrial Ball Check Valves
Schedule 0 Industrial Products & Accessories True Union 000 Industrial Ball Check Valves Pressure Rating @ 7 F ( C), Water /" - " 5 psi " - " 50 psi All Flanged 50 psi = 0 F (0 C) Rated for Vacuum Service
MODEL MODÈLE FACE 48" LIGHT SOURCE SOURCE LUMINEUSE (WATTAGE, LAMP TYPE, LAMP FORM, BASE TYPE, OTHER INFO) 2XF.T5.
Face 3136 FACE 3136 PROJECT PROJET SPEC TYPE NOTES ORDERING SPECIFICATION SPÉCIFICATION DE COMMANDE MODEL MODÈLE FACE 48" 3136-96 FACE 96" CODE LIGHT SOURCE SOURCE LUMINEUSE (WATTAGE, LAMP TYPE, LAMP
CM Body Assembly Service Parts List CM 93 and CM 04 Body Styles
Document Number Issue Date 12/01/93 Rev. Date 5/11/18 CM Body Assembly Service Parts List CM 93 and CM 04 Body Styles Body Style Identification Pump Material Body Style Pumps Built After 2004 Pumps Built
K 2400 HH. Ersatzteilliste Spare Parts List Liste des pièces de rechange K 2400 HH-Q/C
Ersatzteilliste Spare Parts List Liste des pièces de rechange 1.194-301.0 -Q/C 1.194-304.0 *CDN 05 2003 www.karcher.com F2000503 5.958-824.0 1.0 EINZELTEILE 1.0 PIECE PARTS 1.0 PIECES CONSTITUANTES A1
abs section guide application guide standards and approvals
abs Acrylonitrile - Butadiene - Styrene (ABS) is a rigid pressure piping system renowned for its high impact strength and durability which combine to give exceptional toughness. It is suitable for use
ISO/TC 131/SC
DRAFT INTERNATIONAL STANDARD ISO/DIS 6149-1 ISO/TC 131/SC 4 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated
À cylindrée fixe Gamme MAP 50
pplications Moteur à pistons axiaux M+S À cylindrée fixe Gamme MP Cylindrée de 6,6 à cm Vitesse de rotation maxi de tmin Couple maxi danm Puissance maxi 6 Kw ébit d huile maxi : 9 lmin Charge axiale maxi