ISO-BSP FITTINGS PVC-U. Adaptor fittings
|
|
|
- Eustace Garrett
- 6 years ago
- Views:
Transcription
1 ISO-BSP FITTINGS PVC-U Adaptor fittings
2 FITTINGS ISO-BSP Series of fittings designed for conveying fluids under pressure with threaded and solvent weld cold chemical jointing systems (solvent welding) using suitable solvent cement and cleanerprimer. ADAPTOR FITTINGS Technical specifications Size range d (mm); R 3/8 4 Nominal pressure PN 16 with water at 20 C Temperature range 0 C 60 C Coupling standards Solvent welding: ISO 727, UNI EN ISO 15493, DIN 8063, EN ISO 1452, ASTM D 2467, JIS K 6743, BS Can be coupled to pipes according to ISO 161-1, EN ISO 1452, EN ISO 15493, DIN 8062, ASTM D 1785, JIS K6741, BS Thread: UNI ISO 228-1, DIN 2999, BS 21, ISO 7, ASTM D 2464, JIS B 0203 Reference standards Construction criteria: EN ISO 1452, EN ISO Valve material Seal material Test methods and requirements: EN ISO 1452, EN ISO Installation criteria: DVS 2204, DVS 2221, UNI PVC-U EPDM, FPM 50
3 TECHNICAL DATA PRESSURE VARIATION ACCORDING TO TEMPERATURE bar C For water and non-hazardous fluids for which the material is classified as CHEMICALLY RESISTANT (life expectancy 25 years). In other cases, a reduction of the nominal pressure PN is required. Working pressure Working temperature REGRESSION CURVE FOR PVC-U FITTINGS Regression coefficients according to EN ISO 1452 and EN ISO for MRS (minimum required strength) values = 25 N/mm 2 (MPa) (classification PVC-U 250) bar h 20 C 30 C 40 C 50 C 60 C Hoop stress Years Time to failure 51
4 SAFETY FACTORS Pe (bar) 1h 1000h 50 years T The table reports the safety factors for each pressure class as a function of time. Nominal pressure PN must be understood as being the standard pressure used for calculating and selecting the required fittings. In order to be able to comply with the safety factors, the maximum continuous working pressure at 20 C when conveying water must be the same as the nominal pressure values. Unless otherwise specified, the nominal pressures are as follows: solvent weld fittings from d 12 to d 225 PN 16 from d 250 to d 315 PN 10 adaptor fittings from d 16 to d 110 PN 16 threaded fittings from R 3/8 to R 4 up to PN * *with reduced safety factor Some of the fittings in the series are sold as PN16 with a reduced safety factor compared to that specified by ISO standards. The information in this leaflet is provided in good faith. FIP will not be held liable for technical data not originating directly from recognised international standards. The company reserves the right to carry out any modifications. Products must be installed and maintained by qualified personnel. 52
5 DIMENSIONS GIFV 90 elbow with solvent weld socket and BSP threaded female end R d x R PN E L L 1 Z Z 1 g Code 16 x 3/ GIFV x 1/ GIFV x 3/ GIFV x GIFV x 1 1/ GIFV x 1 1/ GIFV x GIFV x 2 1/ GIFV x GIFV x GIFV GIMV 90 elbow with reinforced solvent weld socket d and BSP threaded female end R with stainless steel reinforcing ring d x R PN E E 1 L L 1 Z Z 1 g Code 16 x 3/ GIMV x 1/ GIMV x 3/ GIMV x GIMV x 1 1/ GIMV x 1 1/ GIMV x GIMV
6 TIFV 90 Tee with solvent weld socket d and BSP threaded female end R d x R PN E L L 1 Z Z 1 g Code 16 x 3/ TIFV x 1/ TIFV x 3/ TIFV x 1/ TIFV x TIFV x 1 1/ TIFV x 1/ TIFV x 1 1/ TIFV x 1/ TIFV x TIFV x 2 1/ TIFV x TIFV x TIFV TIMV 90 Tee with reinforced end: solvent weld socket d and BSP threaded female branch R with stainless steel reinforcing ring d x R PN E E 1 L L 1 Z Z 1 g Code 16 x 3/ TIMV x 1/ TIMV x 3/ TIMV x TIMV x 1 1/ TIMV x 1 1/ TIMV x TIMV
7 MIFV Double socket with solvent weld socket d and BSP threaded female end R d x R PN E K L L 1 Z g Code 16 x 3/ MIFV x 1/ MIFV x 3/ MIFV x MIFV x 1 1/ MIFV x 1 1/ MIFV x MIFV MIMV Double socket with solvent weld socket d and BSP threaded female end R with stainless steel reinforcing ring d x R PN E E 1 K L L 1 Z g Code 16 x 3/ MIMV x 1/ MIMV x 3/ MIMV x MIMV x 1 1/ MIMV x 1 1/ MIMV x MIMV
8 Fig. A DIFV Double adaptor with solvent weld socket df, solvent weld spigot dm and BSP threaded female end R (fig. A) dm x df x R PN E H K L 1 Lf Lm g Code 20 x 16 x 3/ DIFV x 20 x 1/ DIFV x 25 x 3/ DIFV x 32 x DIFV x 40 x 1 1/ DIFV x 50 x 1 1/ DIFV Fig. B DIFV Double adaptor with solvent weld socket df, solvent weld spigot dm and BSP threaded female end R (fig. B) dm x df x R PN E H K L 1 Lf Lm g Code 20 x 16 x 1/ DIFV x 20 x 3/ DIFV x 25 x DIFV x 32 x 1 1/ DIFV x 40 x 1 1/ DIFV x 50 x DIFV x 63 x DIFV x 63 x 2 1/ DIFV x 75 x 2 1/ DIFV x 75 x DIFV x 90 x DIFV x 90 x DIFV x 110 x DIFV
9 Fig. A DIMV Double adaptor with solvent weld socket df, solvent weld spigot dm and BSP threaded female end R with stainless steel reinforcing ring (fig. A) dm x df x R PN E E 1 H K L 1 Lf Lm g Code 20 x 16 x 3/ DIMV x 20 x 1/ DIMV x 25 x 3/ DIMV x 32 x DIMV x 40 x 1 1/ DIMV x 50 x 1 1/ DIMV Fig. B DIMV Double adaptor with solvent weld socket df, solvent weld spigot dm and BSP threaded female end R with stainless steel reinforcing ring (fig. B) dm x df x R PN E E 1 H K L 1 Lf Lm g Code 20 x 16 x 1/ DIMV x 20 x 3/ DIMV x 25 x DIMV x 32 x 1 1/ DIMV x 40 x 1 1/ DIMV x 50 x DIMV x 63 x DIMV
10 NRIV Barrel nipple with reduced solvent weld spigot d and BSP threaded male end R d x R PN E H K L 1 g Code 25 x NRIV x 1 1/ NRIV KIFV Double adaptor with solvent weld socket df, solvent weld spigot dm and BSP threaded male end R dm x df x R PN K L 1 Lm Lf Z g Code 16 x 12 x 3/ KIFV x 16 x 3/ KIFV x 16 x 1/ KIFV x 20 x 1/ KIFV x 20 x 3/ KIFV x 25 x 1/ KIFV x 25 x 3/ KIFV x 25 x KIFV x 32 x 3/ KIFV x 32 x KIFV x 32 x 1 1/ KIFV x 40 x KIFV x 40 x 1 1/ KIFV x 40 x 1 1/ KIFV x 50 x 1 1/ KIFV x 50 x 1 1/ KIFV x 50 x KIFV x 63 x 1 1/ KIFV x 63 x KIFV x 63 x 2 1/ KIFV x 75 x KIFV x 75 x 2 1/ KIFV x 75 x KIFV x 90 x 2 1/ KIFV x 90 x KIFV x 90 x KIFV x 110 x KIFV x 110 x KIFV
11 BIFV Union with solvent weld socket d and BSP threaded female end R with O-Ring in EPDM d x R R 1 PN E H L L 1 Z g Code 16 x 3/8 3/ BIFV016038E 20 x 1/ BIFV020012E 25 x 3/4 1 1/ BIFV025034E 32 x 1 1 1/ BIFV032100E 40 x 1 1/ BIFV040114E 50 x 1 1/2 2 1/ BIFV050112E 63 x 2 2 3/ BIFV063200E 75 x 2 1/2 3 1/ BIFV075212E 90 x BIFV090300E 110 x BIFV110400E BIRV Union with fixed BSP threaded male end and O-Ring in EPDM d x R R 1 PN E H K L L 1 Z g Code 50 x 1 1/2 2 1/ BIRV050112E 50 x 2 2 1/ BIRV050200E 63 x 2 2 3/ BIRV063200E BIFOV Adaptor union in PVC-U/brass with solvent weld socket d and BSP threaded brass female end R with O-Ring in EPDM d x R R 1 PN E H K L L 1 Z g Code 16 x 3/8 3/ BIFOV016038E 20 x 1/ BIFOV020012E 25 x 3/4 1 1/ BIFOV025034E 32 x 1 1 1/ BIFOV032100E 40 x 1 1/ BIFOV040114E 50 x 1 1/2 2 1/ BIFOV050112E 63 x 2 2 3/ BIFOV063200E 59
12 BIROV Adaptor union in PVC-U/brass with solvent weld socket d and BSP threaded brass male end R with O-Ring in EPDM d x R R 1 PN E H K L L 1 Z g Code 16 x 3/8 3/ BIROV016038E 20 x 1/ BIROV020012E 25 x 3/4 1 1/ BIROV025034E 32 x 1 1 1/ BIROV032100E 40 x 1 1/ BIROV040114E 50 x 1 1/2 2 1/ BIROV050112E 63 x 2 2 3/ BIROV063200E BIFXV Adaptor union in PVC-U/stainless steel with solvent weld socket d and BSP threaded A316L stainless steel female end R with O-Ring in EPDM or FPM d x R R 1 PN E H K L L 1 Z g EPDM code FPM code 16 x 3/8 3/ BIFXV016038E BIFXV016038F 20 x 1/ BIFXV020012E BIFXV020012F 25 x 3/4 1 1/ BIFXV025034E BIFXV025034F 32 x 1 1 1/ BIFXV032100E BIFXV032100F 40 x 1 1/ BIFXV040114E BIFXV040114F 50 x 1 1/2 2 1/ BIFXV050112E BIFXV050112F 63 x 2 2 3/ BIFXV063200E BIFXV063200F BIRXV Adaptor union in PVC-U/stainless steel with solvent weld socket d and BSP threaded A316L stainless steel male end R with O-Ring in EPDM or FPM d x R R 1 PN E H K L L 1 Z g EPDM code FPM code 16 x 3/8 3/ BIRXV016038E BIRXV016038F 20 x 1/ BIRXV020012E BIRXV020012F 25 x 3/4 1 1/ BIRXV025034E BIRXV025034F 32 x 1 1 1/ BIRXV032100E BIRXV032100F 40 x 1 1/ BIRXV040114E BIRXV040114F 50 x 1 1/2 2 1/ BIRXV050112E BIRXV050112F 63 x 2 2 3/ BIRXV063200E BIRXV063200F 60
13 EFV Union nut with BSP thread for union types BIV, BIFV, BFV, BLV, BIRV, BIFOV, BIROV, BIFXV, BIRXV. R 1 d BIV PN E F H g Code 3/ EFV038 1/ EFV012 3/ EFV EFV / EFV / EFV EFV / EFV / EFV / EFV / EFV EFV EFV500 F/BFV Union bush with BSP threaded female end R R 1 PN L 1 Z g Code 3/8 3/ FBFV038 1/ FBFV012 3/4 1 1/ FBFV / FBFV / FBFV /2 2 1/ FBFV / FBFV200 61
14 F/BRV Union bush with BSP threaded male end R R 1 PN L 1 g Code 1 1/2 2 1/ FBRV / FBRV / FBRV F/BIV Union bush for solvent welding, metric series d R 1 PN L Z g Code 16 3/ FBIV FBIV / FBIV / FBIV FBIV / FBIV / FBIV / FBIV FBIV FBIV110 F/BLV Union bush for solvent welding, series BS d R 1 PN L Z g Code 1/ FBLV012 3/4 1 1/ FBLV / FBLV / FBLV /2 2 1/ FBLV / FBLV200 62
15 Q/BIV Union end for solvent welding, metric series d PN E L Z g Code QBIV QBIV QBIV QBIV QBIV QBIV QBIV QBIV QBIV QBIV110 Q/BLV Union end for solvent welding, BS series d PN d 3 d 4 L Z g Code 1/ QBLV012 3/ QBLV QBLV / QBLV / QBLV QBLV200 63
16 Q/BAV Union end for solvent welding, ASTM series d PN d 3 d 4 L Z g Code 1/ QBAV012 3/ QBAV QBAV / QBAV / QBAV QBAV200 Q/BJV Union end for solvent welding, JIS series d PN d 3 d 4 L Z g Code 1/ QBJV012 3/ QBJV QBJV / QBJV / QBJV QBJV200 64
17 Q/BFO Union end in brass with female BSP thread R d 3 d 4 H L 1 g Code 3/ QBFO038 1/ QBFO012 3/ QBFO QBFO / QBFO / QBFO QBFO200 Q/BRO Union end in brass with male BSP thread R d 3 d 4 H L 1 g Code 3/ QBRO038 1/ QBRO012 3/ QBRO QBRO / QBRO / QBRO QBRO200 65
18 Q/BFX Union end in A316L stainless steel with female BSP thread R d 3 d 4 H L 1 g Code 3/ QBFX038 1/ QBFX012 3/ QBFX QBFX / QBFX / QBFX QBFX200 Q/BRX Union end in A316L stainless steel with male BSP thread R d 3 d 4 H L 1 g Code 3/ QBRX038 1/ QBRX012 3/ QBRX QBRX / QBRX / QBRX QBRX200 66
19 O-Ring O-Ring for union types BIV, BIFV, BFV, BLV, BIRV, BIFOV, BIROV, BIFXV, BIRXV Union d C di T EPDM code FPM code OR3062E OR3062F OR4081E OR4081F OR4112E OR4112F OR4131E OR4131F OR6162E OR6162F OR6187E OR6187F OR6237E OR6237F OR6300E OR6300F OR6362E OR6362F OR6450E OR6450F LIV Tank connector with solvent weld spigot d, threaded joint R with tightening nut and flat gasket in EPDM d x R PN A H K K 1 L L 1 L 2 P g Code 25 x LIV x 1 1/ LIV
20 LIFV Tank connector with solvent weld socket d, male threaded joint R and female threaded joint R 1 with tightening nut and flat gasket in EPDM or FPM d x R x R 1 PN A H K L L 1 L 2 L 3 P g EPDM code FPM code 16 x 3/4 x 1/ LIFV E LIFV F 20 x 1 x 3/ LIFV E LIFV F 25x 1 1/4 x LIFV E LIFV F 32 x 1 1/2 x LIFV E LIFV F 40 x 2 x 1 1/ LIFV E LIFV F JFV Back nut with BSP thread (used on LIV and LIFV) R PN A H K g Code 1/ JFV012 3/ JFV JFV / JFV / JFV JFV200 68
21 LERACCV Code FIP Formatura Iniezione Polimeri Loc. Pian di Parata, Casella Genova Italy Tel Fax
ISO-BSP FITTINGS PVC-C. TemperFIP100 adapter fittings
ISO-BSP FITTINGS PVC-C TemperFIP100 adapter fittings FITTINGS ISO-BSP Series of fittings designed for conveying fluids under pressure with threaded and cold chemical solvent weld jointing systems (solvent
ode V C C C LERA FIP Formatura Iniezione Polimeri
FITTINGS PVC-U The range of PVC-U products includes a complete series of solvent weld, threaded and adaptor fittings for pipes conveying fluids under pressure at maximum working temperatures not exceeding
FITTINGS PVDF. Fittings, metric series ISO-UNI
FITTINGS for socket welding PVDF Fittings, metric series ISO-UNI FITTINGS for socket welding Series of fittings designed for conveying fluids under pressure with a hot weld connection system (socket welding)
DKD/CP DN PVC-U. Direct action pneumatically actuated 2-way diaphragm valve
DKD/CP DN 15 65 PVC-U Direct action pneumatically actuated 2-way diaphragm valve DKD/CP DN 15 65 The DKD/CP diaphragm valve is particularly suitable for shutting off very dirty and/or highly viscous fluids.
FE DN PVC-U. Butterfly valve
FE DN 40 200 PVC-U Butterfly valve FE DN 40 200 The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling
VXE DN PVC-U. Easyfit 2-way ball valve
VXE DN 10 50 PVC-U Easyfit 2-way ball valve VXE DN 10 50 FIP and Giugiaro Design designed and developed VXE Easyfit, the innovative True Union ball with union nut tightening control that permits simple
VR DN PVC-U. Check valve
VR DN 10 100 PVC-U Check valve VR DN 10 100 The VR is an angle seat check valve with weighted PVC piston that allows the passage of fluid in one direction only CHECK VALVE Connection system for solvent
DK/CP DN PVC-U / PVC-C / PP-H / PVDF. Pneumatically actuated 2-way diaphragm valve
PVC-U / PVC-C / PP-H / PVDF Pneumatically actuated 2-way diaphragm valve DK/CP DN 15 32 The new DK/CP diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids.
DK AND DK/CP DN 15 65
DK AND DK/CP DN 15 65 New diaphragm valves with maximised flow rate available in manual or pneumatically actuated versions. Manual versions are equipped with the innovative DIALOCK lockable handwheel.
CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
VKD DN PVC-U. DUAL BLOCK 2-way ball valve
VKD DN 10 50 PVC-U DUAL BLOCK 2-way ball valve VKD DN 10 50 FIP has developed a VKD DUAL BLOCK ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball
PRICE LIST E9.17 PVC-U LARGE BORE PRESSURE FITTINGS
PRICE LIST E9.17 PVC-U LARGE BORE PRESSURE FITTINGS Since 1954 FIP produces injection moulded valves and fittings in thermoplastic materials for pressure pipeline systems thus becoming nowadays the largest
FK DN PVC-U. Butterfly valve
FK DN 40 400 PVC-U Butterfly valve FK DN 40 400 BUTTERFLY VALVE Interchangeable disk in PVC-U with through shaft, available in different thermoplastic materials: PP-H, PVC-C, ABS, PVDF Overall dimensions
FITTINGS PP-H. Fittings, metric series ISO-UNI
FITTINGS for socket welding PP-H Fittings, metric series ISO-UNI FITTINGS for socket welding Series of fittings designed for conveying fluids under pressure with a hot weld connection system (socket welding).
485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
PNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
standard and industrial pipe fittings
fittings mm sizes standard and industrial pipe fittings Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings from 6 bars to 16 bars,
PRICE LIST EB.13 PP-H PIPE AND FITTINGS FOR BUTT WELDING
PRICE LIST EB.13 PIPE AND FITTINGS FOR BUTT WELDING Since 1954 FIP produces injection moulded valves and fittings in thermoplastic materials for pressure pipeline systems thus becoming nowadays the largest
PIPES, FITTINGS AND MANUAL VALVES
PIPES, FITTINGS AND MANUAL VALVES PVC-C The TemperFIP100 PVC-C line consists of a comprehensive range of pipes, fittings and manual valves for use in the construction of process and service lines for conveying
w.npvequipment.co.th VM DN PVC-U Diaphragm valve
VM DN 15 100 PVC-U Diaphragm valve VM DN 15 100 The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective
FK DN PVDF. Butterfly valve
FK DN 40 400 PVDF Butterfly valve FK DN 40 400 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring
PIPE, FITTINGS AND MANUAL VALVES PP-H
PIPE, FITTINGS AND MANUAL VALVES PP-H The PP-H line consists of a comprehensive range of pipes, fittings and valves for use in the construction of process and service lines for conveying pressurised industrial
SXE-SSE DN PVC-U. Easyfit True Union ball and spring check valve
SXE-SSE DN 10 50 PVC-U Easyfit True Union ball and spring check valve SXE-SSE DN 10 50 The Easyfit check valve line developed with Giugiaro Design offers two different versions: SXE with ball shutter and
INSTRUCTION MANUAL. 1. Introduction 2. Safety Instructions.. 2 Unpacking Description. 2. Main Features... 3 Technical Data...
F111.H.BD Bi-Directional Turbine Flow Sensor for Hot Tap Installation INSTRUCTION MANUAL EN 10-11 Table of Contents 1. Introduction 2 Safety Instructions.. 2 Unpacking.. 2 2. Description. 2 Main Features...
VERSION 2. PVC FITTINGS & VALVES Technical Catalogue
VERSION 2 PVC FITTINGS & VALVES Technical Catalogue INTRODUCTION Plasson s innovative products revolutionized the way of connecting polyethylene pipes in the 1960 s. We started with fittings for agricultural
industrial and economy pipe fittings PVC-U Solvent Cement WELD-ON REGULAR 719 Size Code Price 500ml tin
pvcu fittings mm sizes industrial and economy pipe fittings fittings mm sizes 68 Photo: Chlor Generators Ltd Available in a wide range of mm sizes from 10mm to 500mm, and in a choice of pressure ratings
VXE DN PVC-C. Easyfit 2-way ball valve
VXE DN 10 50 PVC-C Easyfit 2-way ball valve VXE DN 10 50 FIP and Giugiaro Design designed and developed VXE Easyfit, the innovative True union ball valve with union nut tightening control system that permits
F111.X Flow Sensor for Hot Tap Installation INSTRUCTION MANUAL. 1. Introduction Safety Instructions Unpacking Description.
F111.X Flow Sensor for Hot Tap Installation INSTRUCTION MANUAL EN 08-05 Table of Contents 1. Introduction 2 1.1. Safety Instructions 2 1.2. Unpacking 2 2. Description. 2 2.1. Main Features.. 3 2.2. Technical
TKD dn PP-H. Dual Block 3-way ball valve
TKD dn 15 50 PP-H Dual Block 3-way ball valve TKD DN 15 50 FIP has developed a VKD DUAL BLOCK ball valve to introduce a high reference standard in thermosplastic valve design. TKD is a True Union diverting
FK DN PVC-U Butterfly valve
.co.th FK DN 40 300 PVC-U Butterfly valve FK DN 40 300 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring
VKD DN PP-H. DUAL BLOCK 2-way ball valve
VKD DN 65 100 PP-H DUAL BLOCK 2-way ball valve VKD DN 65 100 FIP has developed a VKD DUAL BLOCK ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball
DK DN PP-H. DIALOCK 2-way diaphragm valve
DK DN 15 65 PP-H DIALOCK 2-way diaphragm valve DK DN 15 65 The DK DIALOCK diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of
BS up.v.c PRESSURE PIPE FITTINGS
BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9
Modular valve block MVB 100/200
Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution
PIPE, FITTINGS AND MANUAL VALVES PVDF
PIPE, FITTINGS AND MANUAL VALVES PVDF The PVDF line consists of a comprehensive range of pipes, fittings and manual valves for use in the construction of process and service lines for conveying pressurised
Turf & Irrigation EverTUFF TURF Swing Joint Riser Assemblies
Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page 88 Due to Material Cost Variations, s Subject to Change. Check On-line Catalog @ www.spearsmfg.com Most common configurations of Swing
Plastic Pressure Systems Plastic Pressure Systems
Uniclass L71161:P71 CI/SfB TPL10-IND In6 February 2016 Plastic Pressure Systems Plastic Pressure Systems Plastic Pressure Systems TPL10-IND Trade List Polypipe Terrain New Hythe Business Park Trade List
Flowmeter DFM
Flowmeter DFM 165 50 Nominal size DN 10-65 Nominal size /8 2 1/2 Nominal pressure PN 10 bar Features Measuring range to 50,000 l/h suitable for a wide range of applications for gaseous medium types, water,
3 way ball valve S4 hand operated
General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN
upvc PRESSURE AND COMPRESSION FITTINGS
upvc PRESSURE AND COMPRESSION FITTINGS Company Profile Proplastics is the leading supplier of world class plastic pipe systems for water and sewer reticulation in Southern Africa. Established in 1965,
VINKAIR. IV buizen tuyaux pipes
buizen tuyaux pipes BUIZEN LICHTBLAUW NF A 571 TUYAUX BLEU CLAIR NF A 571 PIPES LIGHT BLUE NF A 571 L = 4m gladde uiteinden bouts lisse butt ends Dxs DN PN KG/M /M 16 x 1,8 10 12.5 0.106 3.72 20 x 2,3
Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator
Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency
Diaphragm valve T4 [hand operated]
![Diaphragm valve T4 [hand operated]](/thumbs/80/82122007.jpg "Diaphragm valve T4 [hand operated]")
Praher Kunststofftechnik GmbH DB/EV/DEEN/4/0/95A Subject to technical modifications! General: Body material: Seals: Diaphragm: Dimensions: Connections: -U, PP, PVDF EPDM, FPM EPDM, EPDM/PTFE DN5 DN5 d0
FK DN PVDF. Butterfly valve
FK DN 40 300 PVDF Butterfly valve FK DN 40 300 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring
Ultra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
Air Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
K-Factor. Global Installation Fittings and K-Factors. Global
K-Factor Global Installation Fittings an K-Factors Global K-Factor CD Table of Contents 5 6 7 8 13 14 21 22 27 28 35 36 37 38 39 40 47 48 49 50 51 52 59 60 61 62 63 64 65 66 67 68 79 80 81 82 83 84 91
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
Angle Seat Valve SV 300
Angle Seat Valve SV 00 Advantage corrosion resistant maintenance-free good control characteristics metal-free Application chemical plants industrial plants water treatment Utilisation for shut-off and
ABS Pipe metric system Plain PN10
S Pipe metric system Plain PN10 t (mean) Da (min) Size Thickness Weight Length ode t Da mm kg/m m 16 1.5 0.07 3 11 565 305 20 1.6 0.10 3 11 565 306 25 1.9 0.14 3 11 565 307 35 2.1 0.21 3 11 565 308 16
Polypipe Terrain. New Hythe Business Park. College Road. Aylesford. Kent ME20 7PJ. Tel: Fax:
Uniclass L71161:P71 CI/SfB EFFTM2 In6 February 2018 Plastic Pressure Systems Plastic Pressure Systems Plastic Pressure Systems EFFTM2 Technical Manual Polypipe Terrain New Hythe Business Park Technical
2 way ball valve S4 with integrated Praher Labeling System
Praher Plastics Austria GmbH DB/EN/DEEN///33 Technische Änderungen vorbehalten! way ball valve S4 Symbol photo Safety locking handle system This document does not constitute a guarantee, it is for initial
abs section guide application guide standards and approvals
abs Acrylonitrile - Butadiene - Styrene (ABS) is a rigid pressure piping system renowned for its high impact strength and durability which combine to give exceptional toughness. It is suitable for use
Pressure Pipes & Fittings
Pressure Pipes & Fittings Description: UPVC and CPVC pipes for hot and cold water supply under pressure. Range: Metric series fromø16 up toø315 mm, Imperial series fromø1/2" up toø1". Pressure Rating:
SOLDER RING FITTINGS GENERAL RANGE
Product Guide Size Pk Pk Code SOLDER RING FITTINGS GENERAL RANGE Fittings are manufactured from and alloy Available in sizes from 8-4mm Fittings are designed for jointing tubes to BS EN 7 in hot and cold
SECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
Advanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
Pipe Nipples / Solvent Cement / Pipe Clips 11. Diaphragm Valves / Knife Gate Valves 21
TABLE OF CONTENTS Pipe Sizing 1 Pipe 2 Tee s 3 Elbows 4 Couplings 5 Adaptors, Caps & Plugs 6 Unions 7 Reducer Bushing 8 Wye s / Clamp on Saddles 9 Flanges 10 Pipe Nipples / Solvent Cement / Pipe Clips
A type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
VXE Easyfit 2-way Ball Valve (DN15 - DN50)
The Durapipe Easyfit valve allows customers to brand or label the valve through specialist software that is provided with the product. This innovative technology means that companies can easily own-brand
pvc-u section guide application guide standards and approvals
pvc-u Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. It is rigid, versatile, and is suitable for both above or below ground installations.
VERSION 3. PVC FITTINGS & VALVES Technical Catalogue
VERSION 3 PVC FITTINGS & VALVES Technical Catalogue INTRODUCTION Plasson s innovative products revolutionized the way of connecting polyethylene pipes in the 1960 s. We started with fittings for agricultural
MARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
PRICE LIST 2018 E5.16 PP-H FITTINGS AND VALVES
PRICE LIST 2018 E5.16 FITTINGS AND VALVES Since 1954 FIP produces injection moulded valves and fittings in thermoplastic materials for pressure pipeline systems thus becoming nowadays the largest European
Strainer SF 305. Sealing FPM EPDM
Strainer SF 05 dvantage corrosion resistant transparent version (transparent PVC) for visual control of the degree of soiling easy to maintain pplication chemical plants industrial plants water treatment
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
R690. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double
R677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
PRICE LIST E4.13 MAGNUM 3G SYSTEM OF COMPRESSION FITTINGS AND CLAMP SADDLES
PRICE LIST E4.13 MAGNUM 3G SYSTEM OF COMPRESSION FITTINGS AND CLAMP SADDLES Since 1954 FIP produces injection moulded valves and fittings in thermoplastic materials for pressure pipeline systems thus
Diaphragm Valve MV 310
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation
Gauge valves Type SNV-ST and SNV-SS
Data sheet Gauge valves Type and SNV-SS and SNV-SS valves are designed to meet all industrial refrigeration application requirements. Designed as service valves they provide favourable flow characteristics.
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
FK DN PVC-C. Butterfly valve
FK DN 40 300 PVC-C Butterfly valve FK DN 40 300 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring
Malleable Iron Pipe Fittings BS EN Patterns Sizes List Prices Prices effective from 1st September 2008 Exclusive of VAT.
Malleable Iron Pipe Fittings BS EN 10242 Patterns Sizes List Prices Prices effective from 1st September 2008 Exclusive of VAT. FM 20478 George Fischer Ltd. Profile of a Company In 1802 Johann Conrad Fischer
PVC FITTINGS & VALVES
PVC FITTINGS & VALVS Technical Catalogue Distributor of 1 Introuction Plasson s innovative proucts revolutionize the way of connecting polyethylene pipes in the 1960 s. We starte with fittings for agricultural
BRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
INSERTION Adaptor for analysis
INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion
600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
Spears Low-Extractable SCHEDULE 80 PIPE
Spears Low-Extractable SCHEDULE 80 PIPE NOMINAL PIPE MAX. W.P. LGTHS/ PART NUMBER AVG. OD AVG. ID MIN. WALL LBS/FT SIZE PSI* CARTONS 1/2" LXT-005.840.528.147 420.202 22 3/4" LXT-007 1.050.724.154 340.273
Chapter 1 Pipes and fittings PVC - PE
Chapter 1 Pipes and fittings PVC - PE Solvent weld fittings Threaded connections Ball valves & butterfly valves Page 1-20 Page 21-33 Page 34-37 Slide valves & check valves Solvents & sealants Tools Page
Type 543. Three-way Ball Valve
Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,
FRIATHERM multi / FRIATHERM uni Push-fit system / Press-fit system for drinking water and heating networks
fittings networks Fittings and accessories 9 Transitions, external thread, short 9 Union couplings, external thread 9 Flanges 9 FRIATHERM Component+ adhesive 10 Transition sleeves 11 s - 20 cm 11 FRIATHERM
Bondstrand 2000M/7000M Glassfiber Reinforced Epoxy (GRE) pipe systems for marine service
Quick-Lock Taper/Taper 1-16 inch Bondstrand 2000M/7000M Glassfiber Reinforced Epoxy (GRE) pipe systems for marine service with external pressure requirements 18-40 inch Uses and applications Ballast Portable
Ball valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position
PLASTICA ALFA. Compression. Fittings. Pipe Saddles. For use. with. Polyethylene. Pipe PRODUCT CATALOGUE PROUDLY IMPORTED BY.
Compression PRODUCT CATALOGUE Fittings & Pipe Saddles For use with Polyethylene Pipe DPI Trading PROUDLY IMPORTED BY www.dpitrading.co.za www.incledon.co.za Technical Information Body: black polypropylene
4500 Linea / Line FIELDS OF APPLICATION SYSTEM
4500 Linea - Line Raccordi a compressione con anello tagliato per tubo in polietilene ad alta e bassa densità. Compression fittings for low and high density polyethylene pipe with brass ring 4500 Linea
GEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
VKD DualBlock 2-way Ball Valve
The VKD DualBlock ball valve is a fully unionised valve that stands up to the most severe industrial applications. Size range from /" / d6mm up to 2" / d6mm Pressure rating: Maximum working pressure: 6
PYPLOK System It s the weldless, threadless way to join pipe/tube
The Tube-Mac PYPLOK System It s the weldless, threadless way to join pipe/tube Leakfree performance, reduced installed cost and minimised downtime The Tube-Mac PYPLOK connecting system is sparkless and
Ball & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
GEMÜ R680 Motorized diaphragm valve
Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
Stop Needle Valves SNV-ST and SNV-SS
MAKING MODERN LIVING POSSIBLE Technical brochure Stop Needle Valves and SNV-SS www.danfoss.com/ir Stop Needle Valve, type and SNV-SS Contents Page Introduction........................................................................................
CONTENTS MANUAL VALVES IN PVC-U. PVC-U General characteristics Reference standards Approvals and quality marks Solvent welding instructions
MANUAL VALVES PVC-U The PVC-U manual valves line consists of a comprehensive range of ball valves, butterfly valves, diaphragm valves, check valves, sediment strainers, air release valves, foot valves
Polish Institute for Building Technology. Technical approval issued by ITB No. AT /2011
Polish Institute for Building Technology Technical approval issued by ITB No. AT-15-8792/2011 Polypropylene (PP) compression fittings for polyethylene (PE) pipes WARSZAWA This Technical Approval was prepared
PLASTICA ALFA. Compression. Fittings. Pipe Saddles. For use. with. Polyethylene. Pipe. DPI Trading PRODUCT CATALOGUE PROUDLY IMPORTED BY
Compression PRODUCT CATALOGUE Fittings & Pipe Saddles For use with Polyethylene Pipe DPI Trading PROUDLY IMPORTED BY www.dpitrading.co.za www.incledon.co.za Technical Information Body: black polypropylene
Diaphragm valve, Plastic
Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable