Asynchronous and synchronous motors for SINAMICS S120 1PL6 asynchronous motors Forced ventilation, IP23 degree of protection
|
|
|
- Georgina Dalton
- 5 years ago
- Views:
Transcription
1 Selection and ordering data speed Shaft height power torque voltage Speed during field weakening 1) Continuous speed, max. 2) Speed, max. 3) 1PL6 asynchronous motor Forced ventilation n rated SH P rated M rated I rated U rated n 2 n S1 n max rpm kw (HP) Nm (lb f -ft) A V rpm rpm rpm Order No. Line voltage 400 V 3 AC, Smart/Basic Line Module (27.) 489 (361) )) 000 ) 1PL B (40.9) 728 (37) )) 000 ) 1PL B (3.6) 9 (704) )) 400 ) 1PL B (76.4) 1361 (1004) )) 400 ) 1PL B (96.6) 1719 (1268) )) 400 4)) 1PL B (76.4) 44 (401) ) 000 1PL D (99.2) 707 (22) ) 000 1PL D (141) 1003 (740) ) 400 1PL D (181) 1289 (91) ) 400 1PL D (221) 176 (1163) ) 400 4) 1PL D (102) 484 (37) ) 000 1PL F (14) 688 (08) ) 000 1PL F (190) 904 (667) ) 400 1PL F (23) 1114 (822) ) 400 1PL F (308) 146 (1081) ) 400 4) 1PL F (134) 382 (282) ) 000 1PL L (174) 497 (367) ) 000 1PL L (239) 680 (02) ) 400 1PL L (31) 698 (1) ) 400 1PL L (3) 1013 (747) ) 400 4) 1PL L For versions, see Order No. supplement and options on page /90. /82 Siemens PM
2 Motor type (repeated) Power factor Magnetizing Efficiency frequency Moment of inertia Weight, approx. Terminal box cos ϕ I μ η rated f rated J I rated SINAMICS S120 Motor Module output 6) A Hz kgm 2 (lb f -in-s 2 ) kg (lb) Type A Order No. For additional versions and components see chapter SINAMICS S120 drive system 1PL B (4.4) 370 (816) 1XB SL3120-1TE26-0AA3 1PL B (.89) 440 (970) 1XB ) 6SL3120-1TE28-AA3 1PL B (13.1) 630 (1389) 1XB SL3120-1TE31-3AA3 1PL B (17.1) 70 (164) 1XB SL3120-1TE32-0AA3 1PL B (20.6) 860 (1896) 1XB SL3120-1TE32-0AA3 1PL D (4.4) 370 (816) 1XB SL3120-1TE31-3AA3 1PL D (.89) 440 (970) 1XB SL3120-1TE32-0AA3 1PL D (13.1) 630 (1389) 1XB ) 6SL3320-1TE32-1AA3 1PL D (17.1) 70 (164) 1XB SL3320-1TE33-1AA3 1PL D (20.6) 860 (1896) 1XB SL3320-1TE33-8AA3 1PL F (4.4) 370 (816) 1XB SL3120-1TE32-0AA3 1PL F (.89) 440 (970) 1XB SL3320-1TE32-1AA3 1PL F (13.1) 630 (1389) 1XB SL3320-1TE33-1AA3 1PL F (17.1) 70 (164) 1XB SL3320-1TE33-8AA3 1PL F (20.6) 860 (1896) 1XB SL3320-1TE3-0AA3 1PL L (4.4) 370 (816) 1XB SL3320-1TE32-1AA3 1PL L (.89) 440 (970) 1XB SL3320-1TE33-1AA3 1PL L (13.1) 630 (1389) 1XB SL3320-1TE33-8AA3 1PL L (17.1) 70 (164) 1XB SL3320-1TE3-0AA3 1PL L (20.6) 860 (1896) 1XB SL3320-1TE37-AA3 1) n 2 : Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = P rated. 2) n S1 : Maximum permissible speed that is continuously permitted without speed duty cycles. 3) n max : Maximum speed that must not be exceeded. 4) Speed is reduced with increased radial forces, see selection guides. ) The speed is limited to lower values in some cases. The following restriction applies: Maximum output frequency < motor rated frequency. 6) The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 khz or 2 khz. 7) The rated output of the Motor Module is lower than the motor rated. Siemens PM /83
3 Selection and ordering data speed Shaft height power torque voltage Speed during field weakening 1) Continuous speed, max. 2) Speed, max. 3) 1PL6 asynchronous motor Forced ventilation n rated SH P rated M rated I rated U rated n 2 n S1 n max rpm kw (HP) Nm (lb f -ft) A V rpm rpm rpm Order No. Line voltage 400 V 3 AC, Active Line Module (32.9) 8 (432) )) 000 ) 1PL B (42.2) 72 () )) 000 ) 1PL B (60.4) 1074 (792) )) 400 ) 1PL B (76.4) 1361 (1004) )) 400 ) 1PL B (96.6) 1719 (1268) )) 400 4)) 1PL B (262) 2328 (1717) PL C (33) 2984 (2201) PL C (416) 3701 (2730) PL C (87.2) 40 (398) ) 000 1PL D (114) 706 (21) ) 000 1PL D (161) 997 (73) ) 400 1PL D (208) 1287 (949) ) 400 1PL D (2) 178 (1164) ) 400 4) 1PL D (37) 232 (171) PL D (476) 2944 (2172) PL D (83) 3607 (2688) PL D (119) 486 (39) ) 000 1PL F (168) 682 (03) ) 000 1PL F (221) 900 (664) ) 400 1PL F (268) 1091 (80) ) 400 1PL F (3) 1446 (1067) ) 400 4) 1PL F (496) 2019 (1489) PL F (97) 2429 (1792) PL F (71) 30 (223) PL F (12) 372 (274) ) 000 1PL L (201) 494 (364) ) 000 1PL L (27) 67 (498) ) 400 1PL L (362) 889 (66) ) 400 1PL L (402) 988 (729) ) 400 4) 1PL L For versions, see Order No. supplement and options on page /90. /84 Siemens PM
4 Motor type (repeated) Power factor Magnetizing Efficiency frequency Moment of inertia Weight, approx. Terminal box cos ϕ I μ η rated f rated J I rated SINAMICS S120 Motor Module output 6) A Hz kgm 2 (lb f -in-s 2 ) kg (lb) Type A Order No. For additional versions and components see chapter SINAMICS S120 drive system 1PL B (4.4) 370 (816) 1XB SL3120-1TE28-AA3 1PL B (.89) 440 (970) 1XB ) 6SL3120-1TE28-AA3 1PL B (13.1) 630 (1389) 1XB SL3120-1TE31-3AA3 1PL B (17.1) 70 (164) 1XB SL3120-1TE32-0AA3 1PL B (20.6) 860 (1896) 1XB SL3120-1TE32-0AA3 1PL C (37.2) 1300 (2867) 1XB SL3320-1TE33-8AA3 1PL C (46.0) 100 (3308) 1XB SL3320-1TE3-0AA3 1PL C (.8) 1700 (3749) 1XB SL3320-1TE37-AA3 1PL D (4.4) 370 (816) 1XB SL3120-1TE31-3AA3 1PL D (.89) 440 (970) 1XB SL3120-1TE32-0AA3 1PL D (13.1) 630 (1389) 1XB SL3320-1TE32-6AA3 1PL D (17.1) 70 (164) 1XB SL3320-1TE33-1AA3 1PL D (20.6) 860 (1896) 1XB SL3320-1TE33-8AA3 1PL D (37.2) 1300 (2867) 1XB SL3320-1TE3-0AA3 1PL D (46.0) 100 (3308) 1XB SL3320-1TE38-4AA3 1PL D (.8) 1700 (3749) 1XB SL3320-1TE41-0AA3 1PL F (4.4) 370 (816) 1XB SL3120-1TE32-0AA3 1PL F (.89) 440 (970) 1XB SL3320-1TE32-6AA3 1PL F (13.1) 630 (1389) 1XB SL3320-1TE33-1AA3 1PL F (17.1) 70 (164) 1XB SL3320-1TE33-8AA3 1PL F (20.6) 860 (1896) 1XB SL3320-1TE3-0AA3 1PL F (37.2) 1300 (2867) 1XB SL3320-1TE37-AA3 1PL F (46.0) 100 (3308) 1XB ) 6SL3320-1TE38-4AA3 1PL F (.8) 1700 (3749) 1XB SL3320-1TE41-2AA3 1PL L (4.4) 370 (816) 1XB SL3320-1TE32-1AA3 1PL L (.89) 440 (970) 1XB SL3320-1TE33-1AA3 1PL L (13.1) 630 (1389) 1XB SL3320-1TE33-8AA3 1PL L (17.1) 70 (164) 1XB SL3320-1TE3-0AA3 1PL L (20.6) 860 (1896) 1XB SL3320-1TE37-AA3 1) n 2 : Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = P rated. 2) n S1 : Maximum permissible speed that is continuously permitted without speed duty cycles. 3) n max : Maximum speed that must not be exceeded. 4) Speed is reduced with increased radial forces, see selection guides. ) The speed is limited to lower values in some cases. The following restriction applies: Maximum output frequency < motor rated frequency. 6) The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 khz or 2 khz. 7) The rated output of the Motor Module is lower than the rated motor at 2 khz. Siemens PM /8
5 Selection and ordering data speed Shaft height power torque voltage Speed during field weakening 1) Continuous speed, max. 2) Speed, max. 3) 1PL6 asynchronous motor Forced ventilation n rated SH P rated M rated I rated U rated n 2 n S1 n max rpm kw (HP) Nm (lb f -ft) A V rpm rpm rpm Order No. Line voltage 480 V 3 AC, Smart/Basic/Active Line Module (40.2) 73 (423) )) 000 ) 1PL B (3.6) 764 (64) )) 000 ) 1PL B (73.8) 100 (774) )) 400 ) 1PL B (96.6) 137 (1014) )) 400 ) 1PL B (121) 1719 (1268) )) 400 4)) 1PL B (31) 2244 (16) PL C (416) 2961 (2184) PL C (16) 3677 (2712) PL C (99.2) 23 (386) ) 000 1PL D (131) 693 (11) ) 000 1PL D (184) 969 (71) ) 400 1PL D (231) 1217 (898) ) 400 1PL D (292) 142 (1137) ) 400 4) 1PL D (436) 2299 (1696) PL D (0) 2901 (2140) PL D (677) 373 (263) PL D (131) 468 (34) ) 000 1PL F (181) 64 (476) ) 000 1PL F (239) 80 (627) ) 400 1PL F (29) 100 (774) ) 400 1PL F (386) 137 (1014) ) 400 4) 1PL F (7) 1981 (1461) PL F (671) 2387 (1761) PL F (84) 3009 (2219) PL F (12) 372 (274) ) 000 1PL L (201) 494 (364) ) 000 1PL L (27) 67 (498) ) 400 1PL L (362) 889 (66) ) 400 1PL L (402) 988 (729) ) 400 4) 1PL L For versions, see Order No. supplement and options on page /90. /86 Siemens PM
6 Motor type (repeated) Power factor Magnetizing Efficiency frequency Moment of inertia Weight, approx. Terminal box cos ϕ I μ η rated f rated J I rated SINAMICS S120 Motor Module output 6) A Hz kgm 2 (lb f -in-s 2 ) kg (lb) Type A Order No. For additional versions and components see chapter SINAMICS S120 drive system 1PL B (4.4) 370 (816) 1XB SL3120-1TE28-AA3 1PL B (.89) 440 (970) 1XB SL3120-1TE31-3AA3 1PL B (13.1) 630 (1389) 1XB SL3120-1TE31-3AA3 1PL B (17.1) 70 (164) 1XB SL3120-1TE32-0AA3 1PL B (20.6) 860 (1896) 1XB SL3120-1TE32-0AA3 1PL C (37.2) 1300 (2867) 1XB SL3320-1TE33-8AA3 1PL C (46.0) 100 (3308) 1XB SL3320-1TE3-0AA3 1PL C (.8) 1700 (3749) 1XB SL3320-1TE37-AA3 1PL D (4.4) 370 (816) 1XB SL3120-1TE31-3AA3 1PL D (.89) 440 (970) 1XB SL3120-1TE32-0AA3 1PL D (13.1) 630 (1389) 1XB ) 6SL3320-1TE32-1AA3 1PL D (17.1) 70 (164) 1XB ) 6SL3320-1TE32-6AA3 1PL D (20.6) 860 (1896) 1XB SL3320-1TE33-8AA3 1PL D (37.2) 1300 (2867) 1XB SL3320-1TE3-0AA3 1PL D (46.0) 100 (3308) 1XB SL3320-1TE38-4AA3 1PL D (.8) 1700 (3749) 1XB SL3320-1TE41-0AA3 1PL F (4.4) 370 (816) 1XB SL3120-1TE32-0AA3 1PL F (.89) 440 (970) 1XB SL3320-1TE32-6AA3 1PL F (13.1) 630 (1389) 1XB SL3320-1TE33-1AA3 1PL F (17.1) 70 (164) 1XB SL3320-1TE33-8AA3 1PL F (20.6) 860 (1896) 1XB SL3320-1TE3-0AA3 1PL F (37.2) 1300 (2867) 1XB SL3320-1TE37-AA3 1PL F (46.0) 100 (3308) 1XB ) 6SL3320-1TE38-4AA3 1PL F (.8) 1700 (3749) 1XB SL3320-1TE41-2AA3 1PL L (4.4) 370 (816) 1XB SL3320-1TE32-1AA3 1PL L (.89) 440 (970) 1XB SL3320-1TE33-1AA3 1PL L (13.1) 630 (1389) 1XB SL3320-1TE33-8AA3 1PL L (17.1) 70 (164) 1XB SL3320-1TE3-0AA3 1PL L (20.6) 860 (1896) 1XB SL3320-1TE37-AA3 1) n 2 : Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = P rated. 2) n S1 : Maximum permissible speed that is continuously permitted without speed duty cycles. 3) n max : Maximum speed that must not be exceeded. 4) Speed is reduced with increased radial forces, see selection guides. ) The speed is limited to lower values in some cases. The following restriction applies: Maximum output frequency < motor rated frequency. 6) The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 khz or 2 khz. 7) The rated output of the Motor Module is lower than the rated motor at 2 khz. Siemens PM /87
7 Selection and ordering data speed Shaft height power torque voltage Speed during field weakening 1) Continuous speed, max. 2) Speed, max. 3) 1PL6 asynchronous motor Forced ventilation n rated SH P rated M rated I rated U rated n 2 n S1 n max Order rpm kw (HP) Nm (lb f -ft) A V rpm rpm rpm Order No. code Line voltage 690 V 3 AC, Active Line Module (248) 2208 (1629) PL C Z C (322) 286 (2113) PL C Z C (402) 381 (2641) PL C Z C (36) 229 (1666) PL D Z C (461) 287 (2107) PL D Z C (66) 304 (28) PL D Z C (481) 199 (144) PL F Z C (79) 237 (1739) PL F Z C30 43 (728) 2963 (2186) PL F Z C30 For versions, see Order No. supplement and options on page /92. /88 Siemens PM
8 Motor type (repeated) Power factor Magnetizing Efficiency frequency Moment of inertia Weight, approx. Terminal box cos ϕ I μ η rated f rated J I rated SINAMICS S120 Motor Module output 4) A Hz kgm 2 (lb f -in-s 2 ) kg (lb) Type A Order No. For additional versions and components see chapter SINAMICS S120 drive system 1PL C (37.2) 1300 (2867) 1XB SL3320-1TG32-2AA3 1PL C (46.0) 100 (3308) 1XB SL3320-1TG33-3AA3 1PL C (.8) 1700 (3749) 1XB SL3320-1TG34-1AA3 1PL D (37.2) 1300 (2867) 1XB SL3320-1TG33-3AA3 1PL D (46.0) 100 (3308) 1XB SL3320-1TG34-1AA3 1PL D (.8) 1700 (3749) 1XB ) 6SL3320-1TG34-7AA3 1PL F (37.2) 1300 (2867) 1XB SL3320-1TG34-1AA3 1PL F (46.0) 100 (3308) 1XB SL3320-1TG34-7AA3 1PL F (.8) 1700 (3749) 1XB SL3320-1TG3-8AA3 1) n 2 : Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = P rated. 2) n S1 : Maximum permissible speed that is continuously permitted without speed duty cycles. 3) n max : Maximum speed that must not be exceeded. 4) The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 khz or 2 khz. ) The rated output of the Motor Module is lower than the rated motor at 2 khz. Siemens PM /89
9 Order No. supplements for 1PL618/1PL622 motors Data position of the Order No Shaft height P L Z Shaft height 22 1 P L Overall length 1). Fan External fan, PG cable gland in terminal box 2 Without external fan, for pipe connection, PG cable gland in terminal box 6 External fan, metric cable gland in terminal box 7 Without external fan, for pipe connection, metric cable gland in terminal box 8 Encoder systems for motors without DRIVE-CLiQ interface Without encoder A Absolute encoder 2048 S/R, 4096 revolutions, multi-turn (encoder AM2048S/R) E Incremental encoder HTL 1024 S/R (encoder HTL1024S/R) H Incremental encoder HTL 2048 S/R (encoder HTL2048S/R) J Incremental encoder sin/cos 1 V pp 2048 S/R with C and D tracks (encoder IC2048S/R) M Incremental encoder sin/cos 1 V pp 2048 S/R without C and D tracks (encoder IN2048S/R) N Encoder systems for motors with DRIVE-CLiQ interface Absolute encoder 22 bit (resolution , internal 2048 S/R) + 12 bit multi-turn F (traversing range 4096 revolutions) (encoder AM22DQ) Incremental encoder 22 bit (resolution , internal 2048 S/R) + commutation position 11 bit D (encoder IC22DQ) Incremental encoder 22 bit without commutation position (encoder IN22DQ) Q speeds at 380 V to 480 V 3 AC (winding design) 400 rpm/00 rpm B 1000 rpm/110 rpm/130 rpm D 100 rpm/170 rpm/2000 rpm F 200 rpm/2900 rpm L Cable connection (view of ) Terminal box Cable entry Top Right 0 Top 1 Top 2 Top Left 3 For 12th to 16th data position of the Order No., see page /91. 1) Not selectable. Determined by the choice of rated power. /90 Siemens PM
10 Order No. supplements for 1PL618/1PL622 motors (continued) Data position of the Order No Shaft height P L Z Shaft height 22 1 P L Type of construction IM B3 0 IM B3 Hoisting system for different types of construction (IM B6, IM B7, IM B8, IM V, IM V6) 1 IM B3 1PL618 with A40 flange 3 1PL622 with A0 flange IM B3 1PL618 with A40 flange 1PL622 with A0 flange Hoisting system for different types of construction (IM V1, IM V36) Bearing version Vibration magnitude acc. to Siemens/EN ) Shaft and flange accuracy 1) Coupling R/A N A Coupling R/A R B Coupling S/A R C Coupling SR/A R D Belt R/A N E Belt R/A R F Increased cantilever forces R/A N G Increased cantilever forces R/A R H Shaft extension Balancing Direction of air flow (fan) Fitted key Half-key A Fitted key Half-key 2) B Fitted key Full-key C Fitted key Full-key 2) D Plain shaft J Plain shaft 2) K Paint finish Primed 0 Anthracite RAL Special paint finish in anthracite RAL Special version (order codes are required for options) Z 1) For definition, see 1PL6 Configuration Manual. 2) Preferred direction of air flow in a polluted environment. Siemens PM /91
11 Order No. supplements for 1PL628 motors Data position of the Order No Shaft height P L Z Overall length 1). Fans 2) Mounting Direction of air flow External fan top 0 External fan right 1 External fan left 2 External fan top 3 External fan right 4 External fan left Without external fan right for single pipe connection 6 Encoder systems for motors without DRIVE-CLiQ interface Without encoder A Absolute encoder 2048 S/R, 4096 revolutions, multi-turn (encoder AM2048S/R) E Incremental encoder HTL 1024 S/R (encoder HTL1024S/R) H Incremental encoder HTL 2048 S/R (encoder HTL2048S/R) J Incremental encoder sin/cos 1 V pp 2048 S/R with C and D tracks (encoder IC2048S/R) M Incremental encoder sin/cos 1 V pp 2048 S/R without C and D tracks (encoder IN2048S/R) N Encoder systems for motors with DRIVE-CLiQ interface Absolute encoder 22 bit (resolution , internal 2048 S/R) + 12 bit multi-turn F (traversing range 4096 revolutions) (encoder AM22DQ) Incremental encoder 22 bit (resolution , internal 2048 S/R) + commutation position 11 bit D (encoder IC22DQ) Incremental encoder 22 bit without commutation position (encoder IN22DQ) Q speeds at 380 V to 480 V 3 AC (winding design) 800 rpm/1000 rpm C 110 rpm/130 rpm D 170 rpm/2000 rpm F speeds at 690 V 3 AC (winding design) 800 rpm Order code C30 required C Z 110 rpm Order code C30 required D Z 170 rpm Order code C30 required F Z Cable connection (view of ) 2) Terminal box Cable entry Signal connection right Bottom 0 left Bottom 1 top Right 2 top Right For 12th to 16th data position of the Order No., see page /93. 1) Not selectable. Determined by the choice of rated power. 2) See selection guides. /92 Siemens PM
12 Order No. supplements for 1PL628 motors (continued) Data position of the Order No Shaft height P L Z Type of construction 1) IM B3 0 IM V Can be subsequently modified to IM V6. 1 IM B3 With A660 flange 3 IM V1 With A660 flange Can be subsequently modified to IM V3. Bearing version Vibration magnitude acc. to Siemens/EN ) Shaft and flange accuracy 2) Coupling A N A Coupling R/A R B Increased cantilever forces A N E Increased cantilever forces R/A R F Shaft extension Balancing Fitted key Half-key A Fitted key Full-key C Plain shaft J Paint finish Primed 0 Anthracite RAL Special paint finish in anthracite RAL Special version (order codes are required for options) Z Permissible combinations of mechanical variants for 1PL6 motors, see 1PH7 motors, page /76. 1) See technical definitions for AC motors in chapter Servomotors. 2) For definition, see 1PL6 Configuration Manual. Siemens PM /93
13 1PH7 asynchronous motors Forced ventilation, IP degree of protection Order No. supplements for 1PH728/1PL628 motors Permissible combinations of mechanical variants External fan, terminal box, type of construction and drive type 1PH728/1PL628 motors Permissible combinations of mechanical designs Shaft height 280 Data position of External fan Order No th data position of the Order No. 1PH PH PL PL P Type of construction IM B3 1PL Order No. supplement top right left top right left Single pipe connection right (can be modified subsequently to left) 1PH Type of construction IM V 1PL (can be modified subsequently to IM V6) 1PH Type of construction IM B3 1PL PH Type IM V1 1PL (can be modified subsequently to IM V3) Order codes for options G14 With air filter K08 Encoder connector mounted opposite K Cable entry plate, terminal box, customer-specific 1) K83 Terminal box rotated through +90 degrees K84 Terminal box rotated through -90 degrees K8 Terminal box rotated through 180 degrees K16 Second standard shaft extension (only possible without encoder) Y Non-standard shaft extension M83 Additional thread for a setting screw on motor feet Standard design Released supplementary versions 1) Plain text is required. /76 Siemens PM
14 1PH7 asynchronous motors Forced ventilation, IP degree of protection Terminal box Type of construction Drive type 11th data position of the Order No. 12th data position of the Order No. 14th data position in Order No. 1PH PH PH PL PL PL Order No. supplement Order No. supplement Order No. supplement A B E F right Cable entry at bottom, encoder connector left Cable entry at bottom, encoder connector top Cable entry on right, encoder connector top Cable entry on right, encoder connector Type of construction IM B3 Type of construction IM V (IM V6) Type of construction IM B3 Type of construction IM V1 (IM V3) Coupling N/N Coupling R/R Belt/ Increased radial force N/N Belt/ Increased radial force R/R Siemens PM /77
Asynchronous and synchronous motors for SINAMICS S120 1PL6 asynchronous motors Forced ventilation, IP23 degree of protection
Overview 1PL6 motors, shaft heights 180 to 22 Benefits 7 Extremely high power density with small motor dimensions (0 to 60 % higher output as compared to 1PH7 in degree of protection IP) 7 Speed down to
Asynchronous motors. 5 Asynchronous motors 5/2 Type overview and rated data 5/4 Technical definitions 5/4 Encoder systems
/ Type overview and rated data /4 Technical definitions /4 Encoder systems / PH7 motors / PH7 motors, forced ventilation / Permissible combinations of mechanical designs for PH7 motors, shaft 8 /4 PL motors
AC motors. 3/2 Overview
/ Overview / synchronous (induction) motors / forced-ventilated, degree of protection IP / PL motors forced-ventilated, degree of protection IP /4 Selection guides /4 dditional data for PH7 and PL motors
Configuration Manual 08/2008
SINAMICS S120 Configuration Manual 08/2008 1PH4 induction motors SINAMICS S120 sinamics s Preface Description of the motors 1 SINAMICS S120 Configuration Manual Configuring 2 Mechanical properties of
Asynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction
/ Main spindle motors for SIMODRIVE 611 / Introduction /4 Main spindle motors for SIMODRIVE 611 1PH motors with solid shaft/forced ventilation /18 Main spindle motors for SIMODRIVE 611 1PH4 motors with
SIMOTICS S-1FT7 Servomotors. The Compact Servomotors for High-Performance Motion Control Applications. Motors. Edition April 2017.
Motors SIMOTICS S-1FT7 Servomotors The Compact Servomotors for High-Performance Motion Control Applications Brochure Edition April 2017 siemens.com/servomotors The Servomotors for High-Performance Applications
Table of contents. Three-phase asynchronous motors DA
be in motion be in motion AC Asynchronous Motors DA 100-280 Table of contents 1. Three-phase asynchronous motor DA 100-280... 3 1.1. General technical data... 3 1.2. Ratings definition for ventilated
Table of contents. Three-phase asynchronous motors DA
Table of contents 1. Three-phase asynchronous motor DA 100-280... 5 1.1. General technical data... 5 1.2. General safety instructions... 6 1.3. Definitions of power ratings... 7 1.3.1. Definitions of power
Configuring Manual Edition 04/2007
SINAMICS S120 Drive Technology Configuring Manual Edition 04/2007 1FT7 synchronous motors SINAMICS S120 sinamics s Preface Motor description 1 SINAMICS S120 Configuration Manual Use 2 Mechanical data
Low-Voltage Motors N-compact Standardline Operation on supply system
Low-Voltage Motors N-compact Standardline Operation on supply system 2 2/2 Overview 2/2 Benefits 2/2 Technical specifications 2/2 Selection and Ordering Data 2/ Options 2/ Dimensional drawings 2/4 More
Preferred Series 215 kw to 1500 kw. Catalog DA /2000
s Preferred Series 215 kw to 1500 kw Catalog DA 12.2 1999/2000 Variable-speed drives and equipment in the DA catalog series DA 12 DC Motors for Variable-Speed Drives... SIMOREG Chassis Converters DA 21
FCR asynchronous brake motors LS FCR. General information
General information LIFTING USE : U.L. Enclosed three-phase asynchronous brake motors, LS series with failsafe brake, according to IEC 34, 72, EN 50281. Single speed : 0.55 to 15, frame size from 80 to
Product Information. ROC 2000 ROC 7000 Angle Encoders with Integral Bearing for Separate Shaft Coupling
Product Information ROC 2000 ROC 7000 Angle Encoders with Integral Bearing for Separate Shaft Coupling November 2015 ROC 2000 series For separate shaft coupling System accuracy ±5 A = Bearing À = Position
simodrive POSMO Intelligent motion control with decentralized solutions Overview March 2003
Intelligent motion control with decentralized solutions The SIMODRIVE POSMO series opens up a whole new range of possibilities in the area of machine conception. With SIMODRIVE POSMO, the entire drive
[ T] THREE-PHASE MOTORS «[32] [33] Three-Phase Motors - Technical Catalogue 1018/10
![[ T] THREE-PHASE MOTORS «[32] [33] Three-Phase Motors - Technical Catalogue 1018/10](/thumbs/93/114259204.jpg "[ T] THREE-PHASE MOTORS «[32] [33] Three-Phase Motors - Technical Catalogue 1018/10")
THREE-PHASE MOTORS «[32] [33]» MECHANICAL DESIGN Terminal boxes The location of the terminal box in standard design is on top; on the right or on the left are possible. Motors 71-160 frame size have removable
FLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
(E) Atmospheres containing explosive GAS General information Flameproof totally enclosed three-phase asynchronous motors, FLSD (E) series, according to IEC 60034, 60038, 60072, 60079-0 and 60079-1, EN
Compact, dynamic and rugged
Compact, dynamic and rugged Direct drives for harsh operation conditions SIOTICS T Heavy Duty Torque otors Brochure Edition arch 2016 SIOTICS T Heavy Duty Torque otors Overview In many machining processes
Variable speed asynchronous motors with FCPL brake LSMV FCPL. General information
General information GENERAL USE : U.G. Enclosed three-phase asynchronous brake motors, LSMV series with failsafe continuous current (dc) brake, according to IEC 60034, 60072, EN50281. Separate mains supply
LSRPM - UNIDRIVE SP Synchronous motors with permanent magnets-drive 0.75 to 400 kw
4176 en - 0.08 / a Permanent Magnet Solutions LSRPM - UNIDRIVE SP Synchronous motors with permanent magnets-drive 0.75 to 400 kw Selection guide A modular offer LS SOFT Software + cables RS485 or USB/RS22
Siemens AG SIMOTICS T-1FW3 Torque Motors. The Powerful Torque Motors. Edition February Brochure. siemens.
SIMOTICS T-1FW3 Torque Motors The Powerful Torque Motors Brochure Edition February 2017 siemens.com/torquemotors The powerful torque motors Overview The right torque at the right moment this is decisive
Low-Voltage Motors. Catalog M
Low-Voltage Motors atalog M asic design ast-iron enclosure Energy-saving motor to EMEP Improved Efficiency eff, degree of protection IP, temperature class F, -pole, Hz Selection and ordering data Rated
Open continuous current (DC) motors MS 1 - MS 2. General information
MS 1 - MS 2 General information Open continuous current (dc) motors conforming to the IEC specifications. MS 1 : - frame size 80 to 132 mm, - power 0.44 to 8.85 kw. MS 2 : - frame size 112 and 132 mm,
4,5 / 27 2,0 / steel, black coated. clockwise, viewed from the front face. ø15,9 ø17-0,052 ø6-0,05. ø3,5 8,1 ±0,3 2, T
DC-Micromotors Precious Metal Commutation mnm For combination with (overview on page 4-5) Gearheads: 5, 6, 6/7 Encoders: IE 6... 5 Series 3 4 77... SR Nominal voltage Terminal resistance Output power Efficiency
SIMODRIVE FT7 Synchronous Motors. Configuration Manual 03/2010 SIMODRIVE
SIMODRIVE 611 1FT7 Synchronous Motors Configuration Manual 03/2010 SIMODRIVE s Preface Description of the motors 1 Engineering 2 Mechanical properties of the motors 3 Configuration Manual Technical data
LSES high efficiency three-phase asynchronous motors. General information
Efficiency class IE2 General information Totally enclosed three-phase saving asynchronous motors, series, according to IEC 60034, 60038, 60072 ; 0.75 to 200 kw, frame size 80 to 315 mm. Single speed: 2,4
Enclosed three-phase asynchronous motors driven by electronic drive LSMV General information
General information Enclosed 3-phase asynchronous motors, series, according to IEC 60034, 60072. motor is the result of Leroy-Somer s experience with speed variation and progress in performance of new
PLS Open Drip Proof three-phase asynchronous motors. General information
General information Open Drip Proof three-phase asynchronous motors, series PLS, according to IEC 60034, 60066, 60072 power 7,5 kw to 900 kw, frame size 160 to 400 mm, 2, 4, 6 and 8 ; 230/400 V or 400
water-cooled motor / generator with up to 13 kw continuous power
water-cooled motor / generator with up to 13 kw continuous power KEY FEATURES permanent magnet synchronous machine water-cooled high peak power for motor applications convincing cost-benefit ratio recommended
LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES
LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES FRAMES 355 560 355kW 1500kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in
1 Article designation
Order code LTi synchronous motors LSx Example LSH07410560 1 Article designation LS LTi synchronous motor series T or H 074 1 0 560 / T H Edge measurement of motor in mm (not the flange measurement) 050
1LG0 Low-voltage Motors
Low-voltage motors up to 315kW Catalog D81.5.1 1LG Low-voltage Motors Answers for industry. 1 Table of Contents Overview 3 Motor standards 5 Mechanical design 6 Electrical design 1 Converter fed application
Variable speed asynchronous motors with FCR brake LSMV FCR. General information
General information GENERAL USE : U.G. Closed three-phase asynchronous brake motors, LSMV series with failsafe continuous (dc) brake, according to IEC 3, 72, EN 50281. Single speed : 0.25 to 11, frame
LSPXMV FCR Atmospheres containing explosive dust FCR asynchronous brake motors. General information
General information GENERAL USE : U.G. Enclosed three-phase brake asynchronous motors, LSPXMV series with failsafe brake, according to IEC 6003, 60072, EN 50281. Single speed : 0.25 to 11, frame size from
DYNEO VARIABLE SPEED DRIVES Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors
Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet 0.75 kw to 400 kw Technical catalogue 4936 en - 2012.10 / b Rectifier Simplicity Performance Install and start using your system quickly
FK6 C Servomotors. Characteristics and technical data 0.00 Technical data 00 K values are specified in the Table. FK6 Rated speed [RPM] 6000 6000 M 0 3.2 6.0.0 8.0 6.0 8.0 27.0 36.0..6 Power calculation
Axial Piston Fixed Motor A2FM
Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed
Configuration Manual 12/2006 Edition. 1FK7 Synchronous Motors SINAMICS S120. sinamics
Configuration Manual 12/2006 Edition 1FK7 Synchronous Motors SINMICS S120 sinamics s Foreword Motor Description 1 SINMICS S120 Configuration Manual pplication 2 Mechanical data 3 Electrical data 4 Configuration
SINAMICS S120. 1FW3 complete torque motors. 1FW3 complete torque motors. Configuration Manual 08/2009 SINAMICS
SINAMICS S120 Configuration Manual 08/2009 SINAMICS s Preface Motor description 1 SINAMICS S120 Configuration Manual Configuration 2 Mechanical properties of the motors 3 Technical specifications and
1 Article designation
Order code LTi synchronous motors LSx Example LSH07410560 1 Article designation LS LTi synchronous motor series T or H 074 1 0 560 / T H Edge measurement of motor in mm (not the flange measurement) 050
THREE-PHASE SQUIRREL-CAGE INDUCTION MOTORS EXPLOSION-PROOF FRAME
MASZYNY ELEKTRYCZNE CELMA SA ISO 9001: 2000 ISO 14001 THREE-PHASE SQUIRREL-CAGE INDUCTION MOTORS EXPLOSION-PROOF FRAME 80 132 Type: ECS(K,L,1)g, ECS(K,L,1)gb CS(K,L,1)g, CS(K,L,1)gb GENERAL INFORMATION
LSN Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
General information Non-sparking totally enclosed threephase asynchronous motors, LSN series, according to IEC 60034, 60072, IEC 60079-1 and 60079-15. Single speed: power 0.75 to 90 kw 1, frame size 80
Product Overview. Rotary Encoders for Potentially Explosive Atmospheres (ATEX)
Product Overview Rotary Encoders for Potentially Explosive Atmospheres (ATEX) December 2013 Rotary encoders for use in potentially explosive areas Introduction There are many types of applications in industry
ASM. Asynchronous Spindle. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom
NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 ()1689 8847 Fax: +44 ()1689 884884 Email: sales@sem.co.uk Web: www.sem.co.uk Version 2.1 June 211
ADR-A 系列 ADR -A Series 直接驱动 Direct 旋转电 Drive Rotar y Motor
ADR-A Series ADR-A 系列 Direct Drive Rotary Motor 直接驱动旋转电动机 Direct drive, brushless motor fully integrated with encoder and bearing Low cogging torque Low speed and high speed windings Precise homing through
LSES high efficiency three-phase asynchronous motors General information
General information Efficiency class IE2 Totally enclosed three-phase powersaving asynchronous motors, LSES series, according to IEC 60034, 60038, 60072 ; power 0.75 to 200 kw, frame size 80 to 315 mm.
DC motors. G-motion. CTi Automation - Phone: Fax: Web:
G-motion No matter which drive solution you imagine, we make your dreams come true. True to our slogan (one stop shopping) we offer you a complete programme of electronic and mechanical drive systems which
Motion control technology HDP Series AC Induction Servomotors. ABB Sace S.p.A. Line S Draft - Page 1 ABB
Motion control technology HDP Series AC Induction Servomotors Sace S.p.A. Line S Draft - Page 1 HDP Series AC Induction Servomotors The HDP Servomotor series is the solution for the High Dynamics Performances
Synchronous motors. Main spindle motors for SINAMICS S120 1FE1 standard type built-in motors Water cooling. 6/86 Siemens NC /2008
Synchronous motors Main spindle motors for SINAMICS S2 FE standard type built-in motors Siemens AG 27 Overview Benefits (continued) 7 Compatible system of SINUMERIK, SINAMICS and motor, therefore fast
SIMOTICS. Drive technology 1FT7 synchronous motors. Introduction. Fundamental safety instructions. Description. Preparing for use 3.
Introduction Fundamental safety instructions 1 SIMOTICS Drive technology Operating Instructions Description 2 Preparing for use 3 Assembly 4 Connection 5 Commissioning 6 Operation 7 Faults and their rectification
Index. Cable Brakemotor cable for decentralized MOVI SWITCH Catalog AC Motors DR , DT56, DR /EN 10/14
Index A AC motors Mounting position designations... 89 Additional documentation... 12 Add-on encoder cables... 579, 585 Anti-condensation heating... 500 B Backstop... 471 BE brake technical data... 375
IRT 4000 AT-S/M/L. Technical Manual. quality IN MOTION. quality IN MOTION
IRT quality IN MOTION www.irtsa.com 4000 AT-S/M/L Technical Manual IRT quality IN MOTION E2 0 8 4 1 5 September 2013-Rev. 5 UL Requirements Drives Series 2000 / 4000 AT 1. Field wiring terminal to use
Non-Standard Motors Overview. Low-Voltage. IEC Squirrel-Cage Motors Frame sizes 315 to 450 Power range 160 kw to 1250 kw
Non-Standard Motors Overview MOTORS Low-Voltage IEC Squirrel-Cage Motors Frame sizes 15 to 450 Power range 160 kw to 1250 kw Non-standard motors frame size 15 and above Overview N compact three-phase asynchronous
A.C. Motor for Railway. Auxiliary Application
A.C. Motor for Railway Auxiliary Application EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase
Permanent-magnet synchronous motors
Permanent-magnet synchronous motors Contents Product description 12/2 Overview of technical data 12/4 Motor selection data Series PE.. for Super Premium Efficiency IE4 1) 12/5 Series P, high-power motors
CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm
95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide
Introduction. 1/2 Overview 1/3 Benefits 1/3 Application. 1/3 Order No. code. 1/4 Protection strategy
/2 Overview /3 Benefits /3 Application /3 Order No. code /4 Protection strategy /5 General technical data /5 Converter-fed operation /7 Motor protection /7 Bearing monitoring /8 Electrical design /8 Motor
SIMOTICS S-1FK7 Servomotors
Siemens G 1 Compact Synchronous Motors for Motion Control pplications Motors Brochure Edition October 1 nswers for industry. Siemens G 1 SIMOTICS Motors for Motion Control Tasks The right motor for every
Non-standard motors frame size 315 and above
Siemens AG 2008 Non-standard motors frame size 15 and above /2 Orientation /2 Overview /2 Benefits / Application / Design /4 Technical specifications /11 Selection and ordering data /1 More information
FAP asynchronous brake motors LS FAP. General information
General information GENERL USE : U.G. Enclosed three-phase asynchronous brake motor, series LS with failsafe alternating current (ac) brake, according to IEC 60034,60072, EN50281. Separate supply to the
Explosion and flame-proof cast iron electric motors
Explosion and flame-proof cast iron electric motors EEx-d, EEx-de, IIB, IIC II, 2G IP55 II, 2G&D IP66 T4, T5, T6 Frame size 56 to 160 3 phases Voltage 230/400 V 50Hz Voltage 265/460V 60Hz Types of mounting
Unimotor fm 230 V 460 V Unimotor fm 230 V / 460 V
Unimotor fm 230 V 460 V Unimotor fm 230 V / 460 V Flexible Configuration C Servo Motors Flexible Configuration C Servo Motors Unimotor fm is a high performance, brushless C Servo motor range matched for
SIMOTICS GP Frame sizes 80 and 90
Siemens AG 1 SIMOTICS GP General Purpose Motors - Frame sizes 8 and 9 Outstanding reliability made in Germany www.siemens.com/simotics-gp Brochure Edition January 1 Answers for industry. Siemens AG 1 SIMOTICS
1FW3 complete torque motors SIMOTICS. Drive technology 1FW3 complete torque motors. Introduction. Fundamental safety instructions.
Introduction Fundamental safety instructions 1 SIMOTICS Drive technology Operating Instructions Description 2 Motor components 3 Mechanical properties of the motors 4 Preparations for use 5 Mechanical
MT30R4 D.C. Servomotors
MT30R4 D.C. Servomotors Technical Data Parameter Unit MT30R4-58 MT30R4-46 MT30R4-37 MT30R4-25 GENERAL Voltage Gradient No Load Volts/1000RPM* 58 46 37 25 Max. Terminal Voltage Volts 140 140 140 100 Max.
Series E4F E5F
Three Phase Induction Motors With Rotors Wound for Hoists Series E4F 160-315 E5F 355-400 ASI NT 003.1 I N D E X Use 2 Electrical Tolerances 9 Mechanical Tolerances 9 General Characteristics 2 Technical
Ordering information. When placing an order, specify motor type, size and product code according to the following example.
Ordering information When placing an order, specify motor type, size and product code according to the following example. Example Motor type M3AA 112 MB Pole number 4 Mounting arrangement (IM-code) IM
LSP Servomotors. Order Catalogue. Series: LSP servomotors Stall torque: 0.18 to 18.5 Nm
LSP Servomotors Order Catalogue Series: LSP servomotors Stall torque: 0.18 to 18.5 Nm ID no.: 0814.8B.0-01 Date: 10/01 Subject to technical change without notice. The German version is the original of
Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors
Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors Series R2, Frame 63 355 Introduction KHM R2 series cast iron motors are totally enclosed fan cooled, 3 phase, and squirrel cage induction
Electric cylinders CASM
Electric cylinders CASM 32-4-63 Contents Product description 4 Motors and gearboxes 6 Manuals 1 3D models 1 Linear unit 3 12 Linear unit 4 14 Linear unit 63 16 linear unit 18 Actuator 32 2 Actuator 4 32
KAT.NMST ENG NORM ELECTRIC MOTORS THREE PHASES SQUIRREL CAGE TEFC NMST
KAT.NMST.02.14.ENG NORM ELECTRIC MOTORS THREE PHASES SQUIRREL CAGE TEFC NMST 90 355 IMPORTANT NOTE: Due to the continious development policy, our companyreserves the right to make changes the values, dimensions
MINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR
MINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR Explosion protection Certificate of Conformity: Frame size 71 and 160 Frame size 80, 90, 100, 112, 132 Frame size 180, 200, 225 Frame size 250 Frame size 280
Product Information. Universal rotary unit ERS
Product Information ERS ERS Compact. Flexible. Fast. ERS Electrical rotary unit with torque motor and angle of rotation > 360 as well as the pneumatic holding brake and rotary feed-through options, and
AMxxxx Synchronous Servomotors
AMxxxx Synchronous Servomotors One Cable Technology (OCT) for power and feedback with absolute encoder Backlash-free permanent magnet holding brake Rotatable speedtec plug Modular design Greatest possible
Am Rotböll Weiterstadt Telefax /
AC-Motors IGK/IGKU - 370W housed ac-motors, convectional-cooled technical feature large adjustment range with inverter Drives because of the fanless design (typ. approx. 3-70Hz possible) UL-certification
Dyneo Motors & Drives. Powerdrive FX & MD2 variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors 18 kw to 500 kw
Powerdrive FX & MD2 variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors 18 kw to 500 kw Powerdrive FX range 18 kw to 90 kw Drives with dynamic braking Integrating C-Light 4 Quadrant
ABB Oy MV Induction Machines
PIE / J.Suihkonen 3.7.28 En 2..28 448HF3 45534397 82B B: J.Suihkonen /4 Driven Motor: Compressor Motor type code HXR 5LJ2 Motor type Squirrel cage motor Type of Ex-protection Ex na II T3X Mounting designation
Active Interface Module Active Line Module chassis format, air-cooled
Overview Air-cooled units Design The scope of supply of the includes: DRIVE-CLiQ cable for the connection between Active Interface Module and DRIVE-CLiQ cable for the connection between the Control Unit
SIMOTICS. Drive technology 1FK7 G2 synchronous motors. Introduction. Fundamental safety instructions. Description of the motors. Preparing for use 3
Introduction Fundamental safety instructions 1 SIMOTICS Drive technology Operating Instructions Description of the motors 2 Preparing for use 3 Mounting 4 Connecting 5 Commissioning 6 Operation 7 Faults
Operating Manual (Edition 04/2004) sinamics. Braking Module / Braking Resistor SINAMICS G130
Operating Manual (Edition 04/2004) sinamics Braking Module / Braking Resistor SINAMICS G130 04/04 Contents Contents 1 Safety Information 1-1 2 General 2-1 3 Mechanical Installation 3-1 4 Connection 4-1
Rotative measurement Incremental rotary encoder Ri-10S10C-2B5000-H1181
Clamping flange, Ø 58 mm Solid shaft, Ø 10mm x 20mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +85 C Max. 6000 rev/min (continuous operation
Servo Motors. Unimotor hd, Unimotor fm, NT Series and XV Series lb-in ( Nm) 230 V 460 V
Servo Motors Unimotor hd, Unimotor fm, NT Series and XV Series 0.9-1204 lb-in (0.11-136 Nm) 230 V 460 V Contents Introduction: A Servo Motor for Every Application... 1 Drive and Motor Selection... 3 Electronic
Rotative measurement Incremental rotary encoder Ri-10S10C-2B1000-H1181
Clamping flange, Ø 58 mm Solid shaft, Ø 10 mm x 20 mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +85 C Max. 6000 rev/min (continuous operation
Scroll down to view your document!
Over 100 years cumulative experience 24 hour rush turnaround / technical support service Established in 1993 The leading independent repairer of servo motors and drives in North America. Visit us on the
sinamics SINAMICS G110 Variable Speed Drives 0.12 kw to 3 kw SINAMICS G110 Short Form 2004
Variable Speed Drives 0.12 kw to 3 kw Short Form 2004 sinamics SINAMICS Variable Speed Drives 0.12kW to 3kW Product Information Pricing The is a Variable Speed Drive with basic functions for a variety
System configuration SINAMICS G120P and SINAMICS G120P Cabinet pump, fan, compressor converters
System configuration SINAMICS G120P and SINAMICS G120P Cabinet pump, fan, compressor converters Integrated Drive Systems Overview (continued) SINAMICS G120P Power Modules for use in building technology
Ø 68 mm to ø 115 mm. Material: Weight: Shaft Loads: Enclosure Rating: Connection Options. Cable: Cable Glands:
Electrical Specifications Code: Incremental Resolution: Up to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max. - no load) Low: 500 mv max. at 10 ma Voltage:
Interroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous
D rum Motor Product Description Material Versions Applications Characteristics The drum motor is outstandingly robust with a strong torque and can take a high radial load. Conveyors with high-duty cycles
Ø 68 mm to ø 115 mm. Material: Weight: Bearing Life: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating:
, EN 60079 Electrical Specifications Code: Incremental Resolution: Up to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max. - no load) Low: 500 mv max. at 10
Lexium integrated drives
Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.
Am Rotböll Weiterstadt fax +49 / /
AC-Motors IGL/IGLU 13-740W housed ac-motors, with active cooling technical features compact, plain single- and three-phase motors UL-certification with the IGLU motors optimized heat dissipation by active
Axial piston variable pump A7VO
Axial piston variable pump A7VO RE 92203/06.09 1/52 Replaces: 05.99 Data sheet Series 63 Sizes NG250 to 500 Nominal pressure 350 bar Peak pressure 400 bar Open circuit Contents Type code for Standard program
Siemens AG Synchronous linear motor 1FN6. The electrical gear rack. Brochure September Motors
The electrical gear rack Brochure September 2008 Motors Overview Linear motors are preferred for applications with linear axes in machine and plant engineering with stringent requirements for dynamic response
M4-295X DC Servomotors Direct Replacement of SEM MT30 * motors
M-95X DC Servomotors Direct Replacement of SEM MT3 * motors Identical motor shaft and mount dimensions (IEC & NEMA options) Matched motor windings Compatible torque/speed performance Matched connection
Technical Documentation
Technical Documentation LOW VOLTAGE THREE PHASE TEFC CAGE MOTORS IE315EN Mission, Vision, Targets Our electric motors and generators are optimized in accordance with our client's technical and economical
Connection system MOTION-CONNECT. Power cables for SINAMICS S120 10/7. Overview
Siemens AG 2007 Connection system Power cables for SINAMICS S120 Overview Motor Module connector with circular connector Ring terminal s with circular connector Motor Module connector with open core s
STANDARD VERSION OF HIGH VOLTAGE MOTORS
AUSTRIA STANDARD VERSION OF HIGH VOLTAGE MOTORS The following pages contains the three phase squirrel cage high voltage induction motors in three different versions. a) Open drip-proof IP23 motors SCf
Motors. IE changeover. IEC Squirrel-Cage Motors. Frame sizes 63 to 450 Power range 0.09 to 1250 kw Price List D 81.
s 63 to 450 Power range 0.09 to 1250 kw Price List D 81.1 P October International Efficiency IE changeover Premium Efficiency High Efficiency Standard Efficiency Motors Answers for industry. Statutory
General Purpose Cast Iron Motors
General Purpose Cast Iron Motors Totally enclosed squirrel cage three phase low voltage motors, Sizes 71-355, 0.25 to 250 kw www.abb.com/motors&drives > Motors > Low voltage motors > General purpose motors
Lexium integrated drives
Description ILp for DeviceNet, EtherCAT, Modbus TCP, ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for DeviceNet, EtherCAT, Modbus TCP or and a brushless
DYNEO VARIABLE SPEED DRIVES Unidrive M variable speed drives LSRPM permanent magnet synchronous motors to 85 kw. Technical catalogue
Unidrive M variable speed drives LSRPM permanent magnet synchronous motors 0.75 to 85 kw Technical catalogue 5034 en - 2013.09 / b Unidrive M range 0.75 kw to 90 kw 100 200 400 575 690 Vac Ethernet Onboard