ABB Oy MV Induction Machines
|
|
- Raymond Wilkerson
- 6 years ago
- Views:
Transcription
1 PIE / J.Suihkonen En HF B B: J.Suihkonen /4 Driven Motor: Compressor Motor type code HXR 5LJ2 Motor type Squirrel cage motor Type of Ex-protection Ex na II T3X Mounting designation IM 2 Protected by enclosure IP 55 Method of cooling IC 4 Insulation Class F Standards IEC (IEC 679-5) Ambient temperature, max. 42 C Altitude, max. m.a.s.l. Duty type S Temp. rise Class B (RES) Connection of stator winding Star Rated output 3 kw Voltage V ±5 % Frequency 5 Hz Speed 2979 rpm Current 9 A Relat. starting current 5,3 Relat. starting torque,8 Relat. maximum torque 2, No load current 5 A Rated torque 96 Nm Load characteristics Load % Current A Efficiency % Power Factor 9 93,6, ,8,86 5 9,6,82 Direction of rotation Uni-directional Sound pressure level: (sinus supply, no load) 76 db(a), tol. + 3 db(a), m Inertia rotor / load Approx. 3 kgm² / 6 kgm² Maximum stalling time 2 s (warm) Starting time 3 s (U=Un) 23 s (U=,8 Un) Number of consec. starts 3 / 2 (cold/warm) Maximum number of starts / year Warm-up time constant 8 min Cool-down time constant 35 min This performance data is final and the motor will be manufactured accordingly. All motor data is subject to tolerances in accordance with IEC. Efficiency based on typical additional load losses acc. measurements. Strömbergintie B P.O.Box 86 FIN
2
3
4
5 PIE / J.Suihkonen En HF B B: J.Suihkonen 2/4 Motor type code: HXR 5LJ2 Rated output 3 kw Power Factor.88 Voltage V ±5 % Rated torque 96 Nm Frequency 5 Hz Relat. starting current 5.3 Speed 2978 rpm Relat. starting torque.8 Current 9 A Relat. maximum torque 2. Torque and Current as a Function of Speed I/In T/Tn n/ns I, U=% T, U=% I, U=8% T, U=8% Load Torque Motor type code: HXR 5LJ2 Strömbergintie B P.O.Box 86 FIN
6 PIE / J.Suihkonen En HF B B: J.Suihkonen 3/4 Motor type code: HXR 5LJ2 Rated output 3 kw Power Factor.88 Voltage V ±5 % Rated torque 96 Nm Frequency 5 Hz Relat. starting current 5.3 Speed 2978 rpm Relat. starting torque.8 Current 9 A Relat. maximum torque 2. Time - Current and Thermal Limit Curves Time [s] Stator current / Rated current Thermal capability, running (cold) Thermal capability, running (w arm) Thermal capability, locked (cold) Thermal capability, locked (w arm) Time-current, U = % Time-current, U = 8% Note! The motors intended to use in hazardous area are not allowed to be over-loaded without verified firm control of the over-load and its time. The maximum operating settings are stated in the motor rating plate and/or in its certificate. The motor stall protection shall be based on the maximum safe stall time stated in the motor datasheet, and in case of increased safety (Ex e) machine on te time stated in the motor rating plate and its certificate. Strömbergintie B P.O.Box 86 FIN
7 PIE / J.Suihkonen En HF B B: J.Suihkonen 4/4 Motor type code: HXR 5LJ2 Rated output 3 kw Power Factor.88 Voltage V ±5 % Rated torque 96 Nm Frequency 5 Hz Relat. starting current 5.3 Speed 2978 rpm Relat. starting torque.8 Current 9 A Relat. maximum torque 2. Power Factor as a Function of Speed PF n/ns Strömbergintie B P.O.Box 86 FIN
ABB Ltd HV Induction Machines
ABB Ltd HV Induction Machines Classifying code or document type PERFORMANCE DATA OF MOTOR Department/Author Date of issue Lang. Rev. date Our ref. Design / JITESH 27.05.2008 En 09.06.2008 200839 Customer
More informationDATASHEET FOR INDUCTION MOTOR
CCN NO 47540832001 DESCRIPTION SQUIRREL CAGE INDUCTION MOTOR MOTOR RATING 20HP SUPPLY VOLTAGE & SF 460VAC/60HZ/SF 1.0 DATASHEET FOR INDUCTION MOTOR MAKE A Applicable Standard 1 General Specification -
More informationMVM06184C-AP (3GAA CSE+332)
Technical Data Sheet - DOL 1.00001 A 12/7/2017 untitled.xls 1(3) No. Definition Data Unit Remarks 1 Product TEFC, 3-phase, squirrel cage induction motor 2 Product code MVM06184C-AP (3GAA062312-CSE+332)
More informationDATA SHEET. Three Phase Induction Motor - Squirrel Cage. Customer : Product code : : W22 NEMA Premium Efficiency Three-Phase
DATA SHEET Frame Output Poles Frequency Rated voltage Rated current L. R. Amperes LRC No load current Rated speed Slip Rated torque Locked rotor torque Breakdown torque Insulation class Service factor
More informationDATA SHEET. Three Phase Induction Motor - Squirrel Cage. Customer : Product code : : W22 NEMA Premium Efficiency Three-Phase
DATA SHEET Frame Output Poles Frequency Rated voltage Rated current L. R. Amperes LRC No load current Rated speed Slip Rated torque Locked rotor torque Breakdown torque Insulation class Service factor
More informationDepartment/Author Customer name Customer ref. Item name
Technical Data Sheet - DOL (3) No. Definition Data Unit Remarks Product TEFC, 3-phase, squirrel cage induction motor 2 Product code MVM82D-AP (3GAA833-BSE+332) 3 4 Mounting IM3, B5(flange) 5 Rated output
More informationEMM16154-PP M3BP 160 MLB 4P B3 15kW
Product Information Packet WISTEX II, L.L.C. EMM654-PP M3BP 6 MLB 4P B3 5kW Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
More informationMVM16154D-AP M3AA 160 MLB 4P B5 15KW
Product Information Packet WISTEX II, L.L.C. MVM654D-AP M3AA 6 MLB 4P B5 5KW Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
More informationEMM16154-AP M3AA 160MLB 4 B3 15KW
Product Information Packet WISTEX II, L.L.C. EMM654-AP M3AA 6MLB 4 B3 5KW Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
More information: B3; B5; B14; B34; B35; V1
ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high efficiency general purpose induction motors, which are designed to meet or exceed the requirements for energy efficiency such as: European Eff1, Australia
More informationCompany name: GSI Created by: SLK Phone: (65) Date: 13/03/2017 Client: Client Number: Contact:
Qty. Description 1 2L Product No.: 81U1332 The motor is a 3-phase AC standard motor. Installation: Range of ambient temperature: -2.. C Flange size for motor: FF Note! Product picture may differ from actual
More informationARAGON MOTO R S. Three Phase Induction Motors
ARAGON MOTO R S Three Phase Induction Motors Introduction PEM series motors are defined as totally enclosed, fancooled, squirrel cage type and noted for their novel design, beautiful modelling, compact
More informationPosition Qty. Description Single Price 1 SEV B
Position Qty. Description Single Price 1 SEV.8.8.7.2.B Product No.: 964747 Note! Product picture may differ from actual product Highly advanced pumps with many unique features. The Grundfos SEV ranges
More informationINTER PLANT STANDARD STEEL INDUSTRY. Corresponding IS does not exist
INTER PLANT STANDARD STEEL INDUSTRY IPSS SPECIFICATION FOR ac ROLLER TABLE MOTORS (Second Revision) Corresponding IS does not exist IPSS:1-03-007-14 Formerly : IPSS:1-03-007-03 0. FOREWORD 0.1 This Inter
More informationTHREE PHASE ASYNCHRONOUS MOTORS WITH SQUIRREL CAGE
CAG Electric Machinery HGLIE2 series THREE PHASE ASYNCHRONOUS MOTORS WITH SQUIRREL CAGE Introduction Motors HGL IE2 with cast iron frame offers increased power output with reduced power consumption. This
More informationBrake Motors Aluminium Frame Improved Efficiency EFF2
Motors Energy Automation Coatings Brake Motors Aluminium Frame Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC Output: 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More information[ T] THREE-PHASE MOTORS «[32] [33] Three-Phase Motors - Technical Catalogue 1018/10
THREE-PHASE MOTORS «[32] [33]» MECHANICAL DESIGN Terminal boxes The location of the terminal box in standard design is on top; on the right or on the left are possible. Motors 71-160 frame size have removable
More informationBuilt-in motors. Contents. Product description 7/2 Overview of technical data 7/3
Built-in motors Contents Product description 7/2 Overview of technical data 7/3 Motor selection data Series W4.R (corresponds to Efficiency IE3) 7/4 Series WE.R (corresponds to High Efficiency IE2) 7/6
More informationThree-phase motors for marine use
Three-phase motors for marine use Contents Product description 11/2 Overview of technical data 11/7 Series K.../W4.. for Premium Efficiency IE3 11/8 Series K.../WE.. for High Efficiency IE2 11/12 Series
More informationTechnical Documentation
Technical Documentation LOW VOLTAGE THREE PHASE TEFC CAGE MOTORS IE315EN Mission, Vision, Targets Our electric motors and generators are optimized in accordance with our client's technical and economical
More informationPosition Qty. Description Single Price
Position Qty. Description Single Price 1 SEG.4.26.2.5B On request Product No.: 9675913 Note! Product picture may differ from actual product Grundfos SEG pumps are submersible pumps with horizontal discharge
More informationAluminium Frame Motors Improved Efficiency EFF2
Motors Energy Automation Coatings Aluminium Frame Motors Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC : 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationSINGLE PHASE TEFC CAGE MOTORS
SINGLE PHASE TEFC CAGE MOTORS 2 SINGLE PHASE TEF CAGE MOTORS Mechanical protection: IP 54 Voltage: 220 V, 50 Hz Type Output power P N kw Rated speed n N min -1 Efficiency % Power factor cos Rated current
More informationSquirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES SIZES. MarelliMotori ASI.CT.033.2
Marine Motors Three Phase Squirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES 63-400 SIZES MarelliMotori ASI.CT.033.2 CONTENTS Page STANDARDS 5 ESSENTIAL AND NON-ESSENTIAL SERVICE 5 CLASSIFICATION
More informationDOCUMENTATION PACKAGE
INDUSTRIAL DIVISION 13131 WEST LITTLE YORK ROAD HOUSTON, TX77041 PHONE: (713) 466-0277 - (800) 231-1412 FACSIMILE: (713) 896-5220 DOCUMENTATION PACKAGE Processed By: Contact Person& Title: Email: Project
More informationNon-standard motors frame size 315 and above
Siemens AG 2008 Non-standard motors frame size 15 and above /2 Orientation /2 Overview /2 Benefits / Application / Design /4 Technical specifications /11 Selection and ordering data /1 More information
More informationINTERROLL DRUM MOTOR 113S
DRUM MOTOR Product Description Material Versions Applications Characteristics The drum motor is a perfect drive station for small and medium-duty conveyor systems. Light-duty conveyors Packaging equipment
More informationAsynchronous generators
Asynchronous generators Contents Product description 13/2 Overview of technical data 13/3 Motor selection data Series G4.R on the basis of Premium Efficiency IE3 13/4 Series GE.R on the basis of High Efficiency
More informationPermanent-magnet synchronous motors
Permanent-magnet synchronous motors Contents Product description 12/2 Overview of technical data 12/4 Motor selection data Series PE.. for Super Premium Efficiency IE4 1) 12/5 Series P, high-power motors
More informationCast Iron Frame Motors For Zone 21 Improved Efficiency EFF2
Motors Energy Automation Coatings Cast Iron Frame Motors For Zone 21 Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP66, TEFC : 0.12 up to 250kW Frames: 63 up to 355M/L Voltage:
More informationDOCUMENTATION PACKAGE
INDUSTRIAL DIVISION 13131 WEST LITTLE YORK ROAD HOUSTON, TX77041 PHONE: (713) 466-0277 - (800) 231-1412 FACSIMILE: (713) 896-5220 DOCUMENTATION PACKAGE Processed By: Contact Person& Title: Email: Project
More informationNew Generation 1LE1/1PC1
New Generation LE/PC /2 Orientation /2 Overview /3 Benefits /4 Application /4 Technical specifications /5 Selection and ordering data /7 More information /8 General Line motors with shorter delivery time
More informationP734H - Technical Data Sheet
P734H - Technical Data Sheet Standards STAMFORD industrial alternators meet the requirements of the relevant parts of the BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationCONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Technical Data 3.2 Standard Accessories 3.3 Tolerances
CONTENTS 1 GENERAL 2 STANDARDS 3 TECHNICAL FEATURES 3.1 Basic Technical Data 3.2 Standard Accessories 3.3 Tolerances 4 MOTOR DESIGN 4.1 Stator Casing 4.2 Stator Core with Winding 4.3 Stator Winding 4.4
More informationETM motors Data Book 50Hz - 60Hz
Japanese Technology since 1912 ETM motors Data Book 50Hz - 60Hz 50 HZ ETM MOTORS Page CONTENTS SPECIFICATIONS 1 MOTORS SPECIFICATIONS 101 2 TYPE KEY and NAMEPLATE 201 3 TECHNICAL DATA 301 4 MOTORS DATA
More informationTHREE-PHASE SQUIRREL-CAGE INDUCTION MOTORS EXPLOSION-PROOF FRAME
MASZYNY ELEKTRYCZNE CELMA SA ISO 9001: 2000 ISO 14001 THREE-PHASE SQUIRREL-CAGE INDUCTION MOTORS EXPLOSION-PROOF FRAME 80 132 Type: ECS(K,L,1)g, ECS(K,L,1)gb CS(K,L,1)g, CS(K,L,1)gb GENERAL INFORMATION
More informationGeneral Specifications. Cooling Method 3M series are IC 411 Standard. IC 416, IC 418 can be provided Upon request
3M SERIES Three Phases Low Voltage Asynchronous Motors 3M Series Vilma motors are designed and manufactured with high quality materials and workmanship in order to meet demanding and arduous operation
More informationSingle Phase Poultry Fan Motor, Standard Efficiency,TEAO, Squirrel Cage Rotor
No.: Date: 6/16/2011 Customer : TECHNICAL PROPOSAL Single Phase Poultry Fan Motor, Standard Efficiency,TEAO, Squirrel Cage Rotor Product line : Single-Phase : 48 & 56 TEAO Catalog Number :.3318ES1BRBPFC48
More informationExplosion and flame-proof cast iron electric motors
Explosion and flame-proof cast iron electric motors EEx-d, EEx-de, IIB, IIC II, 2G IP55 II, 2G&D IP66 T4, T5, T6 Frame size 56 to 160 3 phases Voltage 230/400 V 50Hz Voltage 265/460V 60Hz Types of mounting
More informationLSN Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
General information Non-sparking totally enclosed threephase asynchronous motors, LSN series, according to IEC 60034, 60072, IEC 60079-1 and 60079-15. Single speed: power 0.75 to 90 kw 1, frame size 80
More informationAsynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors
Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors Series R2, Frame 63 355 Introduction KHM R2 series cast iron motors are totally enclosed fan cooled, 3 phase, and squirrel cage induction
More informationStandardmotoren Standard motors
Standardmotoren Standard motors Contents Product description 2/2 Overview of technical data 2/5 2 Series W4.R for Premium Efficiency IE3 2/6 Series WE.R for High Efficiency IE2 2/14 Series K2.R for Standard
More informationASM. Asynchronous Spindle. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom
NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 ()1689 8847 Fax: +44 ()1689 884884 Email: sales@sem.co.uk Web: www.sem.co.uk Version 2.1 June 211
More informationOrdering information. When placing an order, specify motor type, size and product code according to the following example.
Ordering information When placing an order, specify motor type, size and product code according to the following example. Example Motor type M3AA 112 MB Pole number 4 Mounting arrangement (IM-code) IM
More informationRotary Vane Compressors DRT4.04 DRT4.08
Rotary Vane Compressors DRT4.4 DRT4.8 Oil free Air Cooled Design Rotary Vane Compressors DRT4.4 DRT4.8 Extremely reliable for many industrial applications Less vanes than other rotary vane vacuum pumps
More informationRVS-AX Instruction Manual
RVS-AX Analog Soft Starter 8-170A, 220-600V Instruction Manual Ver. 10/11/2009 2 Table of Content RVS-AX Instruction Manual 1. TABLE OF CONTENT 1. Table of Content...2 2. Safety & Warnings...3 2.1 Safety...3
More informationELECTRIC MOTORS. Selection. Starting torque and nominal torque
SELECTION PROCEDURE The output powers published overleaf are based upon continuous maximum rating conditions. Therefore design factors for above average running periods do not normally affect the selection.these
More informationMotors for hazardous areas New cast iron motors in sizes
Motors for hazardous areas New cast iron motors in sizes 160-180 Cast iron motors for hazardous areas New design for sizes 160 to 180 With the new product platform for hazardous area motors ABB is now
More informationMetric Efficient Line Cast-iron IEC Motors
Metric Efficient Line Cast-iron IEC Motors SPECIFICATION FOR METRIC EFFICIENT LINE CAST-IRON (MELC) IEC MOTORS IN CHILE-ARGENTINA-BOLIVIA Three Phase, IP55 Cast-iron IE2 Metric Motors @ 40 C Ambient Motor
More informationAsynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction
/ Main spindle motors for SIMODRIVE 611 / Introduction /4 Main spindle motors for SIMODRIVE 611 1PH motors with solid shaft/forced ventilation /18 Main spindle motors for SIMODRIVE 611 1PH4 motors with
More informationS5L1D-G4 Wdg Technical Data Sheet
- Technical Data Sheet Standards STAMFORD industrial alternators meet the requirements of the relevant parts of the IEC EN 60034 and the relevant section of other international standards such as BS5000,
More informationSuitability of Direct Drive Motor Technology as applied to ACC s. Bill Martin & Tom Weinandy
Suitability of Direct Drive Motor Technology as applied to ACC s Bill Martin & Tom Weinandy Agenda Refresher from last year high points What is the technology Installations to date Common Questions Motor
More informationAEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1
AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1 STANDARD AND SPECIFICATION Performance: Meet the requirement of Singapore standard
More informationTRANSNORM LOW VOLTAGE MOTORS IC 411 TN LV 1 4E5
TechnicalDocumentation TN LV 1 4E5 TRANSNORM LOW VOLTAGE MOTORS IC 411 Mission, Vision, Targets Our electric motors and generators are optimized in accordance with our client's technical and economical
More informationIndustrial Performance Motors. New Aluminum and Cast Iron Motors. Flexibility
Industrial Performance Motors New Aluminum and Cast Iron Motors Flexibility Low Voltage Industrial Performance Motors Flexibility Industrial performance motors offer the flexibility needed by most of our
More informationGE Power Conversion. N3 Series Model N37 MV Induction Motor 4 Pole, 50Hz
GE Power Conversion N3 Series Model N37 MV Induction Motor 4 Pole, 50Hz High Power Density High Efficiency Low Vibration Low Noise More power in a smaller package. Built on extensive rotating machine experience.
More informationTechnical Documentation
Technical Documentation LOW VOLTAGE THREE PHASE TEFC CAGE MOTORS IE316EN Mission, Vision, Targets Our electric motors and generators are optimized in accordance with our client's technical and economical
More informationAsynchronous and synchronous motors for SINAMICS S120 1PL6 asynchronous motors Forced ventilation, IP23 degree of protection
Overview 1PL6 motors, shaft heights 180 to 22 Benefits 7 Extremely high power density with small motor dimensions (0 to 60 % higher output as compared to 1PH7 in degree of protection IP) 7 Speed down to
More informationStandard cast iron Motor
Standard cast iron Motor Frame size 80 to 355 Série 1L Phase 3 Voltage 265/460V 60Hz Types of mounting B3 V9 B5 B14 B6 B9 B3 / B5 V5 B3 / B14 B15 V1 B7 V18 V1 / V5 V8 V18 / V5 V6 B8 V3 / V6 V3 V19 V19
More informationIECEx Certificate of Conformity Annexe
Equipment The Squirrel Cage Induction Motor Frames 280 to 315M are totally enclosed fan cooled (TEFC) motors with integral cast cooling fins on frame and end shields. They have winding designs which are
More informationINTERROLL DRUM MOTOR 80i
Product Description Material Versions Applications Characteristics The drum motor is perfect for high torque applications with limited space or access. Small feed conveyors with high-duty cycles Packaging
More informationLARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES
LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES FRAMES 355 560 355kW 1500kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in
More information300 kw ~ 6,300 kw (400 HP ~ 8,500 HP) MEDIUM VOLTAGE VERTICAL MOTORS
300 kw ~ 6,300 kw (400 HP ~ 8,500 HP) MEDIUM VOLTAGE VERTICAL MOTORS series: Combining over 100 years of experience with innovative new technology makes the 21-L series the right choice for the demanding
More informationCPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm
95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide
More informationNon-Standard Motors Overview. Low-Voltage. IEC Squirrel-Cage Motors Frame sizes 315 to 450 Power range 160 kw to 1250 kw
Non-Standard Motors Overview MOTORS Low-Voltage IEC Squirrel-Cage Motors Frame sizes 15 to 450 Power range 160 kw to 1250 kw Non-standard motors frame size 15 and above Overview N compact three-phase asynchronous
More informationSINGLE STAGE TWO STAGES
BLOWERS CATALOG Table of contents SINGLE STAGE TWO STAGES 3 4 1 1 5 6 7 8 9 10 11 12 Weight (Kg) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 2RSC 50-65 Performance curve for Vacuum
More informationCAplus Totally Enclosed Fan Cooled motor
DEP2016.06.20.00EN CAplus Totally Enclosed Fan Cooled motor www.nidec-industrial.com Introduction The new CAplus helps End Users reduce Operating Expenses (OPEX) Higher power density and better efficiency
More informationInterroll. Product Description. Material Versions. Technical Data. Options. Order Information. Accessories. Standard Asynchronous
D rum Motor Product Description Material Versions Applications Characteristics The drum motor is perfect for high torque applications with limited space or access. Small feed conveyors with high-duty cycles
More informationSWE SERIES (IE3) WONDER ELECTRIC MOTOR (S) PTE LTD. Energy Saving Low Noise Environmental Friendly IEC Dimension Low Vibration European Design
RANGE OF PRODUCTS Three phase asynchronous squirrel-cage & slip ring induction motors Three phase asynchronous self-braking motors Hollow shaft rotor motors Cooling tower motors High motors, (IE2) (IE3)
More informationLow-Voltage Motors. Catalog M
Low-Voltage Motors atalog M asic design ast-iron enclosure Energy-saving motor to EMEP Improved Efficiency eff, degree of protection IP, temperature class F, -pole, Hz Selection and ordering data Rated
More informationFLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
(E) Atmospheres containing explosive GAS General information Flameproof totally enclosed three-phase asynchronous motors, FLSD (E) series, according to IEC 60034, 60038, 60072, 60079-0 and 60079-1, EN
More informationInterroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous
Product Description Material Versions Applications Characteristics This drum motor has been developed especially for applications requiring a strong drive. Small conveyors with high-duty cycles Airport
More informationDP A.2.50B. Grundfos pump GRUNDFOS DATA BOOKLET
GRUNDFOS DATA BOOKLET DP10.65.26.A.2.50B Grundfos pump 96106544 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/dpfam/96106544/dp10-65-26-a-2-50b.html
More informationW22 Brake Motor Three-phase Electric Motor
Motors Automation Energy Transmission & Distribution Coatings W22 Brake Motor Three-phase Electric Motor African Market -- Visual index Main motor parts 1 Sealing system 8 Fan 2 Endshields 9 Bridge rectifier
More informationTECHNICAL SPECIFICATION
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden. Copyright 212 ABB TECHNICAL
More informationTECHNICAL SPECIFICATION
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden. Copyright 212 ABB TECHNICAL
More informationThis catalogue also includes cooling medium pumps of the types DKP and EKP.
AUTRIA INTRODUCTION FFD offers a full range of low voltage electric motors, single phase motors as well as three phase squirrel cage induction motors for continuous duty. All motors are manufactured according
More informationE280 DIAMETER FRAMES
E28 DIAMETER FRAMES MODEL NUMBER CODE...E28 FRAME To construct a motor listing, select the combination of features required, and put all the coded information in the proper sequence. Please account for
More informationGeneral purpose aluminum motors Technical data for totally enclosed squirrel cage three phase motors, two-speed
J=1/4 GD Weight kgm kg 3000/1500 = /4 poles 400 V 50 Hz Fan drive, two separate windings 0.65/0.14 M3V 80 3GV 087 11- B 860/1450 73.0/57.0 0.85/0.57 1.5/0.58 4.8/3.6.18/0.93 1.9/.0./.3 0.0008 9 0.95/0.
More informationLow Voltage 3-Phase Induction Motors. Range 0.55kW to 500kW TOTALLY ENCLOSED FAN-COOLED CAST IRON FRAME SERIES AUSTRALIA & NEW ZEALAND
Low Voltage 3-Phase Induction Motors Range 0.55kW to 500kW TOTALLY ENCLOSED FAN-COOLED CAST IRON SERIES General Information MONARCH GX - Three Phase Induction Motors are a range of high quality, Totally
More informationEnergy Saving Three Phase Motors
e-drive Energy Saving Three Phase Motors IEC frames 56 to 400 Outputs 0.09 to 630 IE2 MEPS2006 Type: AHE Aluminium Motors Type: HE Cast-Iron Motors 1 When you need all the features of a premium quality
More information1LG0 Low-voltage Motors
Low-voltage motors up to 315kW Catalog D81.5.1 1LG Low-voltage Motors Answers for industry. 1 Table of Contents Overview 3 Motor standards 5 Mechanical design 6 Electrical design 1 Converter fed application
More informationMarine Solutions. June 20, Author : Siemens Energy & Automation, Thomas Orberger Your Success is Our Goal
Marine Solutions June 20, 2003 Author : Siemens Energy & Automation, Thomas Orberger Your Success is Our Goal System Overview Water Cooling Unit 1 Control Unit 1/2 DUO-Inverter G G CAN System Bus Gateway
More informationCONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances
CONTENTS 1 GENERAL 2 STANDARDS 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances 4 MOTOR DESIGN 4.1 Stator Casing 4.2 Stator Core with Winding 4.3 Stator Winding and Insulation
More information(i) in paragraph 9, for sub-paragraph (i) the following shall be substituted, namely:-
Revision 3 Date: 28/01/2016 Amendment to Schedule 6 for Induction Motor In the said schedule, (i) in paragraph 9, for sub-paragraph (i) the following shall be substituted, namely:- Effective from 1 st
More informationInterroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous
D rum Motor Product Description Material Versions Applications Characteristics The drum motor is outstandingly robust with a strong torque and can take a high radial load. Conveyors with high-duty cycles
More informationSEV D. Grundfos Pump GRUNDFOS DATA BOOKLET
GRUNDFOS DATA BOOKLET SEV.6.6...1D Grundfos Pump 96779 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/sev/96779/sev-6-6---1d.html
More informationM3000 Motors for Hazardous Areas. Low Voltage Non-sparking Motors Ex na, EEx na
M3000 Motors for Hazardous Areas Low Voltage Non-sparking Motors Ex na, EEx na Non-sparking EEx na, Ex na, Ex N Range Standards Frame Size Output range Non-sparking Ex na IEC 60079-15 aluminium 90-250
More informationTable of contents. Three-phase asynchronous motors DA
be in motion be in motion AC Asynchronous Motors DA 100-280 Table of contents 1. Three-phase asynchronous motor DA 100-280... 3 1.1. General technical data... 3 1.2. Ratings definition for ventilated
More informationStandard motors up to frame size 315 L
Siemens AG 008 Standard motors up to frame size 315 L / Orientation / Overview /4 Benefits /4 Application /5 Integration /7 Technical specifications /8 Selection and ordering data /9 More information /10
More informationTAE pole Contactors
TAE9...26 3-pole Contactors d.c. operated with double-winding coil SB8033C3 Utilisation TAE9 to TAE26 contactors are a compliment to the DC control contactor range. The coils have large voltage ranges
More informationIEC Range Three phase IEC low voltage motors - 56 to 355 frames. Single phase motors - 56 to 100 frames Capacitor Run Capacitor Start and Run
CONTENTS Page 3 Selected Range of Motors RANGE INCLUDES.. Page 4 to 5 Standard Compliance Page 6 to 9 General Specifications Page 10 2 Pole - 3000 RPM Synchronous Speed 50 Hz Page 11 4 Pole - 1500 RPM
More informationLow Voltage Induction Motors
Low Voltage Induction Motors Catalogue-2009/04 E TAC-C CAST IRON Frame Size 71->355 0,18-315 kw t-telectric.com Technical features TAC-C motors are designed and manufactured according to IEC34, IEC72,
More informationPresentation Soft starters 0 Altistart 48 soft start - soft stop units
Presentation Soft starters 5 6 7 65_Ver.-EN.fm/ Presentation (continued) Soft starters Applications The Altistart 8 soft start - soft stop unit is a controller with 6 thyristors which is used for the torque-controlled
More informationAC Synchronous Reluctance motors
AC Synchronous Reluctance motors AC Synchronous Reluctance Motors Invented many years ago but developed for production in series only recently the Synchronous reluctance motors combine the advantage of
More informationDatasheet. Pitch Motor PMSM SP260B8
Pitch Motor PMSM SP260B8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260012a 1 Application The Pitch motor
More informationABB-TECHNICAL SPECIFICATION
Document Reference ABB-TECHNICAL SPECIFICATION CG-58C-04-C017-060003 Revision 3.0 Status AFC Document Type SPE System / Unit 60 Discipline ELE Rev. Date 21-11-2013 Contractor Reference 3N911-3BSY200001-GRN
More informationE180 DIAMETER FRAMES
E18 DIAMETER FRAMES MODEL NUMBER CODE...E18 FRAME To construct a motor listing, select the combination of features required and put all the coded information in the proper sequence. Please account for
More informationGeneral Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
More informationDATASHEET - DILMC9-10(24VDC) Technical data General. Contactor, 3p+1N/O, 4kW/400V/AC3. Catalog No Eaton Catalog No. XTCEC009B10TD.
DATASHEET - DILMC9-10(24VDC) Technical data General Contactor, 3p+1N/O, 4kW/400V/AC3 Part no. DILMC9-10(24VDC) Catalog No. 277468 Eaton Catalog No. XTCEC009B10TD EL-Nummer 4110305 (Norway) Standards IEC/EN
More information