Position Qty. Description Single Price

Size: px

Start display at page:

Download "Position Qty. Description Single Price"

Maryann Bridget Hill
5 years ago
Views:

Position Qty. Description Single Price 1 SEG.4.26.2.5B On request Product No.: 9675913 Note!

1 Position Qty. Description Single Price 1 SEG B On request Product No.: Note! Product picture may differ from actual product Grundfos SEG pumps are submersible pumps with horizontal discharge port, specifically designed for pressurized pumping of wastewater with discharge from toilets. The SEG pumps are equipped with a grinder system, grinding destructible solids into small pieces so that they can be led away through pipes of a relatively small diameter. The surface of the pump is smooth to prevent dirt and impurities from sticking to the pump. The pump is primarily made of cast iron. The clamp securing the motor to the pump housing is made of stainless steel to prevent corrosion and allow for ease of service of the pump. The power cable of the pump also incorporates wires for the thermal sensors in the motor winding. The cable connection is a plug solution. The totally sealed plug connection prevents moisture from entering the pump through the cable in case of cable breakage or adverse and/or careless handling of the pump cable. The pump must be connected to a control box or a controller. The pump has been tested by VDE. Controls: Moisture sensor: without moisture sensors Liquid: Liquid temperature range:.. 4 C Liquid temp: 2 C Density: kg/m³ Technical: Type of impeller: Primary shaft seal: Approvals on nameplate: Curve tolerance: Materials: Pump housing: Impeller: Gasket: GRINDER SYSTEM PA-I ISO 996 Annex A Installation: Maximum ambient temperature: 4 C Maximum operating pressure: 6 bar Flange standard: DIN Pump outlet: DN 4 Pressure stage: PN 1 Maximum installation depth: 1 m 1/6

2 Position Qty. Description Single Price Electrical data: Number of poles: 2 Power input - P1: 3.7 kw Rated power - P2: 2.6 kw Mains frequency: 5 Hz Rated voltage: 3 x V Voltage tolerance: +6/-1 % Start. method: direct-on-line Max starts per. hour: 3 Rated current: 6.1 A Starting current: 33 A Rated current at no load: 2.8 A Cos phi - power factor:,87 Cos phi - p.f. at 3/4 load:,81 Cos phi - p.f. at 1/2 load:,68 Rated speed: 287 rpm Moment of inertia:.93 kg m² Motor efficiency at full load: 82 % Motor efficiency at 3/4 load: 84 % Motor efficiency at 1/2 load: 84 % Enclosure class (IEC 34-5): 68 Insulation class (IEC 85): F Length of cable: 1 m Cable type: H7RN-F Type of cable plug: No plug Others: Net weight: 57 kg 2/6

3 SEG B 5 Hz H (m) SEG B, 5 Hz Liquid temperature = 2 C Density = kg/m³ P (kw) Q(l/s) P1 3 P /6

4 Description Value Product name: SEG B Product No: EAN number: H (m) 28 SEG B, 5 Hz Liquid temperature = 2 C Density = kg/m³ Technical: Max flow: Head max: Type of impeller: Primary shaft seal: Approvals on nameplate: Curve tolerance: Materials: Pump housing: Impeller: Gasket: 5.2 l/s 33.8 m GRINDER SYSTEM PA-I ISO 996 Annex A Installation: Maximum ambient temperature: 4 C Maximum operating pressure: 6 bar Flange standard: DIN Pump outlet: DN 4 Pressure stage: PN 1 Maximum installation depth: 1 m Inst dry/wet: S Installation: vertical P (kw) 2 1 3/4" / 1" /2" / 2" 365 Q(l/s) P1 P2 Liquid: Liquid temperature range:.. 4 C Liquid temp: 2 C Density: kg/m³ 9 DN4 PN Electrical data: Number of poles: 2 Power input - P1: 3.7 kw Rated power - P2: 2.6 kw Mains frequency: 5 Hz Rated voltage: 3 x V Voltage tolerance: +6/-1 % Start. method: direct-on-line Max starts per. hour: 3 Rated current: 6.1 A Starting current: 33 A Rated current at no load: 2.8 A Cos phi - power factor:,87 Cos phi - p.f. at 3/4 load:,81 Cos phi - p.f. at 1/2 load:,68 Rated speed: 287 rpm Moment of inertia:.93 kg m² Motor efficiency at full load: 82 % Motor efficiency at 3/4 load: 84 % Motor efficiency at 1/2 load: 84 % Enclosure class (IEC 34-5): 68 Insulation class (IEC 85): F Motor protec: THERMAL SWITCH Thermal protec: external Length of cable: 1 m Cable type: H7RN-F Type of cable plug: No plug 118 DN 4 / 5 PN DN 4 / 5 PN M16 12 min Controls: Control box: Moisture sensor: Others: Net weight: not included without moisture sensors 57 kg 4/6

5 SEG B 5 Hz /4" / 1" 1 1/2" / 2" DN4 PN M16 12 min DN 4 / 5 PN1 DN 4 / 5 PN Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. 5/6

6 SEG B 5 Hz Note! All units are in [mm] unless others are stated. 6/6

Company name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 14/03/2017

Company name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 14/03/2017 Position Qty. Description 1 CR 32-3-2 A-F-A-E-HQQE Phone: 8 61 Date: 1/3/217 Product No.: 961221 Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range: