Active Interface Module Active Line Module chassis format, air-cooled

Transcription

1 Overview Air-cooled units Design The scope of supply of the includes: DRIVE-CLiQ cable for the connection between Active Interface Module and DRIVE-CLiQ cable for the connection between the Control Unit and first Motor Module are used in conjunction with Active Line Modules. contain a Clean Power Filter with basic RI suppression, the pre-charging circuit for the, the line supply voltage sensing circuit and monitoring sensors. The bypass contactor is an integral component in frame sizes FI and GI, thereby making the module very compact. The bypass contactor must be provided separately for frame sizes HI and JI. Line harmonics are largely suppressed by the Clean Power Filter. Active Interface Module chassis format, air-cooled chassis format, liquid-cooled of the s at 400 V or 690 V kw Order No. 6SL3330-7TE3-1AA3 13 6SL3300-7TE3-6AA0 6SL3330-7TE3-6AA SL3300-7TE3-6AA0 6SL3330-7TE33-8AA3 35 6SL3300-7TE33-8AA0 6SL3330-7TE35-0AA3 6SL3335-7TE35-0AA SL3300-7TE35-0AA0 6SL3330-7TE36-1AA SL3300-7TE38-4AA0 6SL3330-7TE37-5AA SL3300-7TE38-4AA0 6SL3330-7TE38-4AA3 6SL3335-7TE38-4AA SL3300-7TE38-4AA0 6SL3330-7TE41-0AA SL3300-7TE41-4AA0 6SL3330-7TE41-AA SL3300-7TE41-4AA0 6SL3330-7TE41-4AA SL3300-7TE41-4AA0 6SL3330-7TG35-8AA3 6SL3335-7TG35-8AA SL3300-7TG35-8AA0 6SL3330-7TG37-4AA SL3300-7TG37-4AA0 6SL3330-7TG41-0AA SL3300-7TG41-3AA0 6SL3330-7TG41-3AA3 6SL3335-7TG41-3AA SL3300-7TG41-3AA0 Siemens D /37

2 Air-cooled units Technical data 6SL3300-7TE38-4AA0 6SL3300-7TE41-4AA0 at 400 V kw / /900 - Air-cooled 6SL3330-7TE36-1AA3 6SL3330-7TE37-5AA3 6SL3330-7TE38-4AA3 6SL3330-7TE41-0AA3 6SL3330-7TE41-AA3 6SL3330-7TE41-4AA3 - Liquid-cooled 6SL3335-7TE38-4AA3 A Bypass contactor 3RT1476-6AP36 3WL1110-BB34-4AN-Z C 3WL111-BB34-4AN-Z C 3WL1116-BB34-4AN-Z C Current demand 4 V DC auxiliary power supply A V AC - Making A Holding A DC link capacitance μf of the drive line-up, max. 1) Power loss, max. ) At 50 Hz 400 V kw At 60 Hz 460 V kw Cooling air requirement m 3 /s Line supply/load connection L1, L, L3/U, V, W 4 hole for M1 4 hole for M1 3 hole for M1 3 hole for M1 Conductor cross-section, max. (IEC) mm PE/GND connection M1 nut M1 nut 4 M1 nut 4 M1 nut Conductor cross-section, max. (IEC) mm Degree of protection IP00 IP00 IP00 IP00 Dimensions Width mm Height mm Depth mm Weight, approx. kg Frame size HI HI JI JI 1) Information on higher capacities is included in the SINAMICS Low Voltage Engineering Manual. ) The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions. Siemens D /41

3 Liquid-cooled units s Overview at 400 V or 690 V DC link kw A Order No SL3335-7TE35-0AA SL3335-7TE38-4AA SL3335-7TG35-8AA SL3335-7TG41-3AA3 The self-commutated infeed/regenerative feedback units (with IGBTs in infeed and regenerative feedback directions) generate a regulated DC link voltage. This means that the connected Motor Modules are decoupled from the line voltage. Line voltage fluctuations within the permissible supply tolerances have no effect on the motor voltage. If required, the s can also provide reactive power compensation. s are designed for connection to grounded TN/TT and non-grounded IT supply systems. Liquid-cooled s are especially suitable for applications where installation space is restricted and for critical environmental conditions. s are always operated together with the associated. These include the necessary pre-charging circuit as well as a Clean Power Filter. System components such as line reactors,, motor reactors and motor filters are air-cooled. See also selection and ordering data in the section Chassis Format, air-cooled Active Interface Module. Description Accessories for re-ordering Warning labels in 16 languages Using this set of labels, another language can be placed over the German or English labels available as standard. A set of labels is provided with the devices. The following languages are available once in the set of labels: Chinese (simplified), Danish, Finnish, French, Greek, Italian, Japanese, Korean, Dutch, Polish, Portuguese/ Brazilian, Russian, Swedish, Spanish, Czech, Turkish Dust protection blanking plugs (50 units) For DRIVE-CLiQ port Order No. 6SL3166-3AB00-0AA0 6SL3066-4CA00-0AA0 Line-side components as well as recommended system components ( Components). Design The liquid-cooled s have the following interfaces as standard: 1 line supply connection 1 connection for the 4 V DC electronics power supply 1 DC link connection (DCP, DCN) for supplying the connected Motor Modules 3 DRIVE-CLiQ sockets 1 temperature sensor input (KTY84-130, PTC or Pt100) 1 PE/protective conductor connection coolant connections The following are included in the scope of supply of the Active Line Modules: 1 DRIVE-CLiQ cable to connect to the CU30- or SIMOTION D4x5 Control Unit 1 CD-ROM with Manual in PDF format seals for coolant connections Siemens D /75

4 Liquid-cooled units s Technical data s 6SL3335-7TE35-0AA3 6SL3335-7TE38-4AA3 For I N DC (50 Hz 400 V) kw For I H DC (50 Hz 400 V) kw For I N DC (60 Hz 460 V) hp For I H DC (60 Hz 460 V) hp DC link I N DC A Base load I 1) H DC A Maximum I max DC A Infeed/regenerative feedback I N E A Maximum I max E A Current demand 4 V DC auxiliary power supply A DC link capacitance μf Power loss, at 50 Hz 400 V ) Dissipated to the coolant kw Dissipated to the ambient air kw Total kw Coolant flow rate 3) l/min 1 16 Volume of liquid dm in the integrated heat exchanger Pressure drop, typ. 4) Pa for volumetric flow Heat exchanger material Stainless steel Aluminum Sound pressure level L 5) pa db 5 54 (1 m) at 50/60 Hz Line supply connection U1, V1, W1 Hole for M1 x hole for M1 Conductor cross-section, max. (IEC) mm DC link connection DCP, DCN hole for M1 Busbar hole for M1 Busbar PE/GND connection hole for M1 hole for M1 Conductor cross-section, max. (IEC) mm Cable length, max. 6) Shielded m Unshielded m Degree of protection IP00 IP00 Dimensions Width mm Height mm Depth mm Weight, approx. kg Frame size GXL HXL 1) The base load I H DC is the basis for a duty cycle of 150 % for 60 s or I max DC for 5 s with a duty cycle duration of 300 s. ) The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions. 3) The value applies to water and a mixture of water and Antifrogen N mixture with 45 % Antifrogen N as coolant. 4) The value is valid for water as coolant. Additional information and notes on other coolants is provided in the SINAMICS Low Voltage Engineering Manual. 5) Total sound pressure level of Active Interface Module and Active Line Module. 6) Sum of all motor cables and DC link. Longer cable lengths for specific configurations are available on request. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual. Siemens D /77

5 System components Line-side components Recommended line-side system components Assignment of line-side power components to air-cooled and liquid-cooled s or, chassis format at 400 V input Bypass contactor or 690 V Active Interface Module kw A 6SL Order No TE3-6AA0 6SL3330-7TE3-1AA3 Included in Active Interface Module TE3-6AA0 6SL3330-7TE3-6AA3 Included in Active Interface Module TE33-8AA0 6SL3330-7TE33-8AA3 Included in Active Interface Module TE35-0AA0 6SL3330-7TE35-0AA3 Included in Active Interface Module 6SL3335-7TE35-0AA TE38-4AA0 6SL3330-7TE36-1AA3 3RT1476-6AP TE38-4AA0 6SL3330-7TE38-4AA3 6SL3335-7TE38-4AA3 3WL1110-BB34-4AN-Z C TE41-4AA0 6SL3330-7TE41-0AA3 3WL111-BB34-4AN-Z C TE41-4AA0 6SL3330-7TE41-4AA3 3WL1116-BB34-4AN-Z C Line voltage V 3 AC TG35-8AA0 6SL3330-7TG35-8AA3 3RT1476-6AP36 6SL3335-7TG35-8AA TG37-4AA0 6SL3330-7TG37-4AA3 3RT1476-6AP TG41-3AA0 6SL3330-7TG41-0AA3 3WL11-4BB34-4AN-Z C TG41-3AA0 6SL3330-7TG41-3AA3 6SL3335-7TG41-3AA3 3WL116-4BB34-4AN-Z C power at 400 V or 690 V input Active Interface Module 1) Liquid-cooled version, 6SL Active Line Module Switch disconnector without handle and shaft Switch disconnector with handle and shaft Cable protection fuse Cable protection fuse incl. semiconductor protection kw A 6SL SL SL Order No. Order No. Order No. A Order No. A Line voltage V 3 AC TE3-6AA0 7TE3-1AA3 3KL5530-1AB01 3KL5530-1GB01 3NA NE TE3-6AA0 7TE3-6AA3 3KL5730-1AB01 3KL5730-1GB01 3NA NE TE33-8AA0 7TE33-8AA3 3KL5730-1AB01 3KL5730-1GB01 3NA NE TE35-0AA0 7TE35-0AA3 3KL6130-1AB0 3KL6130-1GB0 3NA NE TE35-0AA3 1) TE38-4AA0 7TE36-1AA3 3KL630-1AB0 3KL630-1GB0 3NA NE TE38-4AA0 7TE38-4AA3 7TE38-4AA3 1) 3NA336 ( units) TE41-4AA0 7TE41-0AA3 3NA3365 ( units) TE41-4AA0 7TE41-4AA3 3NA NE1334- ( units) 500 3NE1436- ( units) NE TG35-8AA0 7TG35-8AA NE TG35-8AA3 1) 3KL6130-1AB0 3KL6130-1GB0 3NA335-6 ( units) TG37-4AA0 7TG37-4AA3 3KL630-1AB0 3KL630-1GB0 3NA ( units) 400 3NE TG41-3AA0 7TG41-0AA3 3NA NE1436- ( units) TG41-3AA0 7TG41-3AA3 3NA NE1438-7TG41-3AA3 1) ( units) /100 Siemens D