PC Tire Slip Camber Angle Test Machine
|
|
- Logan Black
- 5 years ago
- Views:
Transcription
1 PC Tire Slip Camber Angle Test Machine 4. Technical Parameters : Machine Structure Horizontal machine frame Position Number 2 Full Load Power 200 kw Test Speed km/h Accuracy : 0 +2 km/h Speed Control Stepless speed in DC closed-control Tire diameter Φ450mm Φ00mm Drum diamete Width Φ mm Drum Radial Run-out 0.5mm Drum Lateral Run-out 0.5mm Test Load Max. 35 kn Accuracy : ±%P.S. Loading Means Hydraulic servo in closed-loop control. Machine Type:TJR-2-PCD YSC Slip Range ±5 Dynamic Accuracy ±0. Camber Range ±5 Pre-set Accuracy ±0. In accordance with ISO, SAE, TÜV standards. Angle Apply Hydraulic servo in closed-loop control Machine Dimension: About L9000mm W3900mm H2500mm Used for Tire Endurance, High Speed, Slip and Camber angle tests. Machine Total Weight: About 20t 0/
2 3M Diameter Drum OTR Tire Endurance Test Machine. Machine Type : TJR--OTR Y In accordance with ISO, SAE, TÜV standard Used for OTR Tire Endurance Test 4. Technical Parameters : Machine Structure Horizontal Machine Frame Position Number Single Position Full Load Power 260 kw Test Speed Max. 80km/h Accuracy : 0 +2 km/h Drum Diameter Width Φ mm Tire Diameter Φ200mm Φ2500mm Test Load Max. 400 kn Accuracy : ±%P.S. Loading Means Hydraulic servo in closed-loop control Machine Dimension: L0800mm W3400mm H3000mm Machine Total Weight: 44t /
3 3M Diameter Drum Tire Noise Test Machine. Machine Type : TJR--PCN Y In accordance with ISO, SAE, TÜV standard Used for PC & TB Tire Noise Test Inspection 4. Technical Parameters : Machine Structure Vertical Machine Frame Position Number Single Position Full Load Power 30 kw Test Speed km/h Accuracy : 0 +2 km/h Drum Diameter Width Φ mm Tire Diameter Φ500mm Φ300mm Tire Rim Diameter 2 24 Test Load Max. 70 kn Accuracy : ±%P.S. Loading Means Hydraulic servo in closed-loop control Machine Dimension: L300mm W2700mm H600mm Machine Total Weight: 30t 2/
4 5M Diameter Drum OTR Tire Endurance Test Machine /. Machine Type : TJR--OTR Y A In accordance with ISO, SAE standards Used for OTR tire inspection. It can evaluate the performance of OTR tire via the TKPH value (related ton kilometer per hour), which is arrived through tire temperature influence analysis of working cycle. Machine Structure Horizontal Machine Frame Position Number Single Position Full Load Power 450 kw Test Speed Max 70km/h, Accuracy : 0 +2 km/h Drum Diameter Width Φ mm Tire Rim Diameter Tire Diameter Φ700mm Φ400mm Test Load Max kn Accuracy : ±%P.S. Loading Means Hydraulic servo in closed-loop control Machine Dimension: L3000mm W7200mm H5200mm Machine Total Weight: 20t 3/
5 Tire Force & Moment Test Machine. Machine Type : LFL- In accordance with SAE j 987 and SAE j 06 standard Used for measuring the five tire forces and moments in steady-state under free-rolling conditions as a function of slip angle and normal force. Machine Structure Vertical Machine Frame Motor Power 253 kw Test Speed 0 20km/h Accuracy : 0 + km/h Drum Diameter Width Φ mm Drum Surface Coating 80 micron abrasive powder Tire Diameter Max. Φ000mm Tire Unloaded Radius Min. 250mm Tire Rim Diameter Min. 3 Test Vertical Load Max. 30 kn Accuracy ±% Lateral Force kn Accuracy ±% Aligning Torque kn.m Accuracy ±% Slip Angle Range ±25 Accuracy ±0.05 Camber Angle Range ±5 Accuracy ±0.05 Machine Dimension: L5200mm W300mm H6900mm Machine Total Weight: 45t 4/
6 TB Tire Plunger Test Machine. Machine Type: TBST- In accordance with ISO, SAE, JIS standards. Used for TB Tire Static Load Test & Plunger Test Machine Structure Vertical Machine Frame Full Load Power 20 kw Tire Diameter Φ600mm Φ400mm Test Tire Section Width mm Tire Rim Nominal Diameter Tire Rim Nominal Width mm Loading Means Mechanical loading Method Loading Device Thrusting Force Max. 00 kn Loading Device Stroke Max. 500 mm Loading Speed of Loading Device 50±2.5 mm/min Machine Dimension: L500mm W2000mm H3200mm Machine Total Weight: 6t 5/
7 MC Tire Plunger Test Machine. Machine Type:LQD-2 In accordance with China National Standard GB GB/T : Used for measuring the tire strength and destructive performance. Machine Structure : Vertical Machine Frame Full Load Power 20 kw Tire Diameter Φ350mm Φ800mm Tire Section Width Max. 250 mm Tire Rim Nominal Diameter 8 2 Loading Means Mechanical Loading Loading Device Thruting Force Max. 20 kn Loading Device Stroke Max. 350 mm Loading Speed of Loading Device 50±2.5 mm/min Machine Dimension: Machine Total Weight: L200mm W000mm H2300mm.8t 6/
8 PC Tire Plunger/Bead Unseating Test Machine. Machine Type: LQD-3/4 In accordance with China National (GB)and Ministry of Chemical Industry (HG/T) standard It is used for PC tire static load/plunger/unbeating tests. Machine structure:vertical Machine Frame Full load power:7 kw Tire Diameter:Φ450mm Φ000mm Test Tire Section Width: mm Rim Nominal Diameter:0 28 Rim Nominal Width: mm Loading Method:Mechnical loading Plunger Test Load:Max. 50 kn Unbeating Resistance Load:Max. 20 kn Loading Speed:50±2.5 mm/min Fast Return Speed:50 500mm/min Machine Dimension:L2600mm W500mm H2600mm Machine Total Weight: 4.5t All specification can be customized as per user s request 7/
9 Tire Run-out Measuring Machine (Production-Line Type). Machine Type: ROM-00 In accordance with ISO, SAE, TÜV standards : Used for measuring TB tire radial run-out and lateral run-out. Machine Structure Vertical Machine Frame Full Load Power 6 kw Tire Rotation Speed(Surface Linear Velocity): 2 48 m/min Max.Tire Volume 0.39 m Productivity 60 PCS/H Tire Diameter Φ609mm Φ300mm Tire Rim Nominal Width 4.5" 4" Repeatability of measuring system 0. mm Measuring Run-out Range 5mm Measuring Accuracy Radial Measuring Accuracy 0.20 mm Machine Dimension: Machine Total Weight: Lateral Measuring Accuracy: 0.20 mm L5400mm W4500mm H4850mm 8t 3 8/
10 Tire Run-out Measuring Machine. Machine Type: ROM-200 : In accordance with ISO, SAE, and TÜV standards. Used for measuring TB tire radial & lateral run-out Machine Structure Vertical Machine Frame Full Load Power 0 kw Productivity 30PCS/H Tire Diameter Φ609mm Φ300mm Tire Max Section Width 70mm 480mm Tire Rim Nominal Width 5.5" 4" Repeatability of Measuring System 0.2 mm Measuring Run-out Range 5mm Tire Rotation Speed (Surface Linear Velocity): 2 48m/min Radial Measuring Accuracy 0.20 mm Lateral Measuring Accuracy: Tire Weight Max. 50 kg Tire Volume Max m 0.20 mm Machine Dimension: L3200mm W700mm H3200mm Machine Total Weight: 5t 3 9/
11 Tire Cutter. Machine Type: TCA In accordance with ISO, SAE, JIS, VIA, TÜV standards Use for cutting all kinds of bias tire and radial tires. Machine Structure Vertical Machine Frame System Power 7.5 kw System Pressure 6 MPa Max Thrusting Force 390kN Cutter Blade Width 700mm Applicable Tire Min Bead Diameter 7.5 Section Width: 450 mm Machine Dimension: L3500mm W800mm H500mm 20/
12 Tire Cutter. Machine Type: TCB In accordance with ISO, SAE, JIS, VIA, TÜV standards Used for cutting all kinds of tires, which cuts the entire tire section into segmented pieces.. Machine Structure : Vertical Machine Frame Working Voltage AC 380 V 50 Hz System Power 7.5 kw System Pressure 4 MPa Max Thrusting Force 390kN Cutter Blade Width 350mm Applicable Tire Max Diameter: φ400mm Section Width: 400 mm Machine Dimension: L600mm W300mm H3050mm Machine Total Weight: 3 t 2/
13 2-Position Bicycle Tire Endurance Test Machine. Machine Type: TJR-2-BC J In accordance with ISO, SAE, and TÜV standards Used for Bicycle Tire Endurance Test Machine Structure Horizontal Machine Frame Position Number 2 Full Load Power 6 kw Test Speed 0 80km/h, Accuracy : 0 +2 km/h Tire Diameter Φ250mm Φ800mm Test Load kn, Accuracy : ±2%P.S. Loading Means Mechnical Weight Loading Drum Diameter Width 2-Φ790mm 50mm Drum Radial Run-out 0.20mm Residual Imbalance < 5g Machine Dimension: L5900mm W200mm H850mm Machine Total Weight: 3 t 22/
14 4-Position Bicycle Tire Endurance Test Machine. Machine Type: TJR-4-BC J In accordance with ISO, SAE, and TÜV standards Used for Bicycle Tire Endurance Test : Machine Structure Horizontal Machine Frame Position Number 4 Full Load Power 8 kw Test Speed 0 80km/h, Accuracy : 0 +2 km/h Tire Diameter Φ250mm Φ800mm Test Load kn, Accuracy : ±2%P.S. Loading Means Mechcanical Weight Loading Drum Diameter Width 2-Φ790 50mm Drum Radial Run-out 0.20mm Drum Lateral Run-out 0.20mm Residual Imbalance < 5g Machine Dimension: L5900mm W200mm H850mm Machine Total Weight: 4t 23/
15 Tubeless TB Tire Changer Tire Mounting Tire Demounting Gap about 0-5mm Groove at above Machine Structure Vertical Machine Frame. Machine Type: LZC-2 In accordance with ISO, SAE, JIS standards Full Load Power 3 kw Tire Diameter Tire Section Width Max.450 mm Machine Dimension: L850mm W880mm H2250mm Used for tubeless TB tire mounting and demounting Machine Total Weight:.3t 24/
Specification: Tire Test Machine. 3M Diameter Drum OTR Tire Endurance Test Machine TJR-1-OTR(Y) 14/1
3M Diameter Drum OTR Tire Endurance Test Machine TJR--OTR(Y). Machine Type: TJR--OTR (Y) Used for OTR Tire Radial Endurance Test Machine Structure: Horizontal Machine Frame Position Number: Drum Diameter
More informationTire Testing Machines
Tire Testing Machines TS TS Founded 2005 Founded 1994 Founded 2010 Founded 1933 Engineering, construction, supply and commissioning of test stations for tires Engineering, construction, supply and commissioning
More informationWheel Test Machine. All specification can be customized as per user s request 00/2
00/ Car Wheel Dynamic Radial Fatigue Test Machine 1. Machine Type: RFT-. Machine application: For Passenger Car Wheel Dynamic Radial Fatigue Test 3. Technical parameters: Structure: vertical machine frame
More informationCornering & Traction Test Rig MTS Flat-Trac IV CT plus
Testing Facilities Cornering & Traction Test Rig MTS Flat-Trac IV CT plus s steady-state force and moment measurement dynamic force and moment measurement slip angel sweeps tests tractive tests sinusoidal
More informationGLOBAL ORGANIZATION - LOCAL SUPPORT TESTING EQUIPMENT
GLOBAL ORGANIZATION - LOCAL SUPPORT TESTING EQUIPMENT CONTENTS Page Introduction 3 Endurance tester for passenger car & truck tires 4 Force and moment tester for passenger car & truck tires 5 Six position
More informationALWAYS ON THE SAFE SIDE
ALWAYS ON THE SAFE SIDE ZF TEST SYSTEMS FOR TIRES ZF TEST SYSTEMS FOR TIRES TIRE CHARACTERISTICS: FROM LOW TO HIGH FORCES Tires and wheels are the most delicate and most severely stressed parts of a vehicle.
More informationFeatures of the LM Guide
Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can
More informationTest Plan Guideline. Test Plan. These mentioned parameters
Savari XL V7901117AA Tyre 185//65x14 86H OR 7901117 Parameter No. 001 Test Name Appearance Description The tire must not have any crack, warp, abrasion, shrinking, air lock, and such faults. Parameter
More informationSURFACE VEHICLE RECOMMENDED PRACTICE
SURFACE VEHICLE RECOMMENDED PRACTICE J1095 Issued 1982-06 Revised 2003-03 REV. MAR2003 Superseding J1095 MAR1995 Spoke Wheels and Hub Fatigue Test Procedures 1. Scope This SAE Recommended Practice provides
More informationA dream? Dr. Jürgen Bredenbeck Tire Technology Expo, February 2012 Cologne
Rolling resistance measurement on the road: A dream? Dr. Jürgen Bredenbeck Tire Technology Expo, 14.-16. February 2012 Cologne Content Motivation Introduction of the used Measurement Equipment Introduction
More informationED5800H SPECIFICATION
SPEC.F5-3713E ED5800H Hydraulic Earth Drilling Rig SPECIFICATION March, 2011 Nagoya, Japan Tel : 81- (52) - 623-3529 Fax: 81- (52) - 623-4349 Due to company policy of continuous development and improvement,
More informationSteel cord conveyor belt curing press line Technical specification
2600 10600 1 Steel cord conveyor belt curing press line Technical specification Qingdao Doublestar Rubber & Plastic Machinery Co., Ltd Feb. 21, 2013 1. Scope of supply 2. Technological process 3. Machine
More informationTECHNICAL SPECIFICATIONS
RT60 ROUGH TERRAIN CRANE TECHNICAL SPECIFICATIONS RT60/27Y-2014 (0075110-000) ZOOMLION HEAVY INDUSTRY SCIENCE AND TECHNOLOGY CO., LTD. INTRODUCTION RT60 rough terrain crane is of wide tread, high stability,
More informationFeatures of the LM Guide
Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can
More informationSheave head. Auxiliary winch. Leader
Sheave head Rope crowd system (RDS) Auxiliary winch Tool with quick connection Lateral inclination device Leader Leader support arm Longitudinal inclination device Vertical travel device Support arm brace
More informationProduct Range and Applications
Product Range and Applications Registered ISO 9001:2000 201103 Version ABOUT TONG YONG SOLID CUSHION TIRE History Founded in 1958 Tong Yong cushion tire was principally the producer of tires for farms
More informationFlat-out value proven productivity, reliability, durability.
RC120 COMPACTORS Flat-out value proven productivity, reliability, durability. A machine needs to work to earn its keep. Rhino Equipment Vibratory Soil Compactors are well equipped to perform a wide range
More informationGB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T4501-2016 www.chinesestandard.net Sales@ChineseStandard.net GB ICS 83.160.10 G 41 GB/T 4501-2016 Replacing GB/T 4501-2008 Laboratory Test Methods for Truck and
More informationNODIA AND COMPANY. Model Test Paper - I GATE Machine Design. Copyright By Publishers
No part of this publication may be reproduced or distributed in any form or any means, electronic, mechanical, photocopying, or otherwise without the prior permission of the author. Model Test Paper -
More informationThe product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice.
Wheel gears... 3 Axial piston pumps... 3 Axial piston motors... 3 Winches... 4 Radial piston pumps... 4 Radial piston motors... 4 Slewing rings... 5 Gear pumps... 5 Gear flow dividers... 5 Cylinders...
More informationSPMM OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000?
SPMM 5000 OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000? The Suspension Parameter Measuring Machine (SPMM) is designed to measure the quasi-static suspension characteristics that are important
More informationII YEAR AUTOMOBILE ENGINEERING AT AUTOMOTIVE CHASSIS QUESTION BANK UNIT I - LAYOUT, FRAME, FRONT AXLE AND STEERING SYSTEM
II YEAR AUTOMOBILE ENGINEERING AT 6402 - AUTOMOTIVE CHASSIS QUESTION BANK UNIT I - LAYOUT, FRAME, FRONT AXLE AND STEERING SYSTEM 1. Write about the requirements of frame and selection of cross section
More informationServo-hydraulic Universal Testing Machine HUT Type DP
Test type Slip & Tensile Strength Permanent Elongation & Tensile Strength Static Tension Test Static Compression Test Cyclic Tension & Compression Test Test standards AC 133: 2010: 4.1 BS 8110: PART 1:
More informationThe Multibody Systems Approach to Vehicle Dynamics
The Multibody Systems Approach to Vehicle Dynamics A Short Course Lecture 4 Tyre Characteristics Professor Mike Blundell Phd, MSc, BSc (Hons), FIMechE, CEng Course Agenda Day 1 Lecture 1 Introduction to
More informationServo-hydraulic Universal Testing Machine HUT Type D
Test type Slip & Tensile Strength Permanent Elongation & Tensile Strength Static Tension Test Static Compression Test Test standards BS 8110: PART 1: 1997 3.12.8.16.2 BS4482 BS4483 BS4449 ASTM A 1034:
More informationModeling tire vibrations in ABS-braking
Modeling tire vibrations in ABS-braking Ari Tuononen Aalto University Lassi Hartikainen, Frank Petry, Stephan Westermann Goodyear S.A. Tag des Fahrwerks 8. Oktober 2012 Contents 1. Introduction 2. Review
More informationTire & Wheel Fundamentals
Tire & Wheel Fundamentals 1 Tire Function Provide traction (friction) with the road surface Provide cushion between the road and the metal wheel 2 Tire Construction Tube Tires Have a tube inside the tire
More informationMMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines
Mitsubishi Heavy Industries Technical Review Vol. 49 No. 4 (December 2012) 23 MMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines Mitsubishi Heavy Industries Plastic Technology
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationBIAS & RADIAL Technical Databook
BIAS & RADIAL Technical Databook EUROTRAK + EUROTOOLS + EUROSERVICE + EUROCLASS = EUROCARE Advice, Tread Features, & TKPH TIRE PRESSURE ADVICE Monitoring and controlling tire pressure is a key process
More informationSingle Axis Robot KK Type
K02TE02-0701 Single Axis Robot KK Type 1.1 Features 〇 Easy for system design, installation and maintenance 〇 Compact and lightweight 〇 High accuracy 〇 High stiffness 〇 Complete selection of accessories
More informationLX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm
S P E C I F I C A T I O N S LX80 W H E E L L O A D E R n Engine Rated Power : 80.9 kw (110 PS) n Operating Weight : Canopy / (Rops / Fops) Cab 8 120 kg / 8 610 kg n Backhoe Bucket : ISO Heaped - 1.9 40
More informationZwick. Materials testing. Product Information LTM 5/10 electro-dynamic testing machine
CTA: 113389 113384 testing machine Range of application The LTM is an electro-dynamic testing machine with a drive based on linear motor technology. 's new, patented drive concept enables the LTM to be
More informationGB/T Translated English of Chinese Standard: GB/T Translated by:
Translated English of Chinese Standard: GB/T4502-2009 Translated by: www.chinesestandard.net Email: Sales@ChineseStandard.net ICS 83.160.10 National Standard of the People s Republic of China GB G 41 GB/T
More informationRE / /09.97
RE 5 05/0.98 05/09.97 Hydraulic Motor (Radial Piston, Multi-Stroke) Type MCR 0, Series X RE 5 05/0.98 Size0 to 400 up to 4 bar up to 400 cm up to 07 Nm Replaces: 09.97 Compact, sturdy construction Smooth
More informationCNC Hydraulic Punching Machine for Plates Model PP103B
CNC Hydraulic Punching Machine for Plates Model PP103B 1. Technical Specification of PP103B 1) Max. punching force: 1000kN 2) Max. size of workpiece: 775 1500mm 3) Thickness of workpiece: 5 ~ 25mm 4) Max.
More informationDETa-1 Collet Holder DTA. DTE Fully applicable. DTB For high-speed cutting, High cost performance. 2mm collapsibility with just one collet!!
HSK-T ing Systems or Turning Mill M/ ETa-1 OET HOER AGE HEA General Purpose ETa-1 ollet Holder Pull collet type OET HOER 2mm collapsibility with just one collet!! Just 6 collets is all it takes to chuck
More informationJINAN HENGRUIJIN TESTING MACHINE CO.LTD
1. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine... 2 2. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine... 3 3. WDW Series Microcomputer
More informationTorsion testing machine
WTT Series Metal Wire Torsion Tester Application: WTT Series Metal Wire Torsion Tester is mainly used to test the plasticity of metal wires and ropes under torsion condition. Surface flaws of steel wires
More information4-rolls FOMP /16
4-rolls FOMP 4000 20/16 Length mm 4000 Central roll diameter mm 460 Lateral rolls diameter mm 380 Bending thickness mm 20 Pre-bending thickness mm 16 This machine is available equipped with: - Hydraulic
More informationMichelin Agriculture and Compact Line Data Book
Michelin Agriculture and Compact Line Data Book Contents MICHELIN features...4-11 MICHELIN s commitments....4-5 Size equivalences....6 MICHELIN tires by size....7 Tire sidewall markings....8 Load and speed
More informationTire Changer Information
monty TIRE CHANGERS Tire Changer Information Model Number: Serial Number: Purchase Date: Sales Representative: Model Number: Serial Number: Purchase Date: Sales Representative: Model Number: Serial Number:
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More information- Largest working capacity in a compact foot print - Highest productivity - Highest reliability
MK63S SERIES MK63S series is our third generation of MK6S production vertical machining center; Backed up 675 units world wide installations in the past 2 years (1994-214), the MK63S series achieves: -
More informationMTS Criterion Series 40 Specifications - Comparative
MTS Criterion Series 40 Specifications - Comparative Model 41 Model 42 Model 43 Model 44 C41.103 C42.503 C43.104 C43.304 C43.504 C44.104 C44.304 Maximum Rated kn 1 5 10 30 50 10 30 Force Capacity lbf 220
More informationSERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES D
SERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES D STANDARD BS 8110: PART 1: 1997 3.12.8.16.2, BS4482. BS4483, BS4449, ASTM A 1034: 10.5, 10.7 TEST TYPE Slip & Tensile Strength Permanent Elongation & Tensile
More informationPRESS-IN UNITS QMP line
QMP 80 QMP 100 QMP 140 PRESS-IN UNITS QMP line Overview of the different construction sizes Models Maximum force in kn > QMP 80 2,5 5 10 20 > QMP 100 30 40 50 60 > QMP 140 70 100 120 NOK RUN OK The illuminated
More informationWHEEL AND TIRE GROUP CONTENTS GENERAL SPECIFICATIONS SERVICE SPECIFICATIONS WHEEL AND TIRE
31-1 GROUP 31 CONTENTS GENERAL SPECIFICATIONS...... 31-2 SERVICE SPECIFICATIONS....... 31-2 DIAGNOSIS.... 31-3 DIAGNOSIS........................ 31-3 WHEEL BALANCE ACCURACY........ 31-4 ON-VEHICLE SERVICE...........
More informationwe cut faster Vertical Machining Center MV204II series
we cut faster Vertical Machining Center MV24II series From : October 24 we cut faster Maximum capacity and performance in a very compact working envelope 1 OUTLING MV24II series P & PD models FANUC 18iM-B
More informationInner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR
LM Guide ctuator Model LM Guide + all Screw = Integral-structure ctuator Stopper Housing all screw Inner block Grease nipple Outer rail earing (supported side) Housing Stopper Double-row ball circuit earing
More information14 Construction. Kincrome Cement Mixer. Kincrome Plate Compactors. Kincrome Level Range CONSTRUCTION
Construction 223 14 Construction A12 12 MONTH WAR RAN T A Y Kincrome Cement Mixer New to the range. This front tip mixer has 160 litre (5.65CF, 0.16m 3 ) capacity, single phase motor and 10 wheels. Stand
More informationHighsun. Create with most. professional high-speed plastic solution. Time to go global
Highsun Time to go global Create with most professional high-speed plastic solution LEADING ADVANTAGES 1 2 3 HIGHER-RIGIDITY & STRONGER MECHANICAL STRUCTURE HIGH-SPEED PERFORMANCE ADVANCED DESIGN & HIGHER
More informationS P E C I F I C A T I O N S
S P E C I F I C A T I O N S LX50 W H E E L L O A D E R Engine Rated Power : 44.1 kw (60 PS) Operating Weight : Canopy / Cab 4 695 kg (10 350 lb) / 4 845 kg (10 680 lb) Backhoe Bucket : ISO Heaped 0.6 m
More informationRT-200H SPECIFICATION
SPEC.F5-4330E RT-200H Casing Rotator (High-Power type) SPECIFICATION November, 2010 Nagoya, Japan Tel : 81- (52) - 623-3529 Fax: 81- (52) - 623-4349 Due to company policy of continuous development and
More informationDevelopment of High-performance Phenolic Resin Idler Pulley
TECHNICAL PAPER Development of High-performance Phenolic Resin Idler Pulley H. ARAI K. MORI Resins idler pulleys in automotive engines are increasingly used for improving fuel efficiency through weight
More information2.0 TECHNICAL SPECIFICATION:!
0 of 6 HYDRAMARIN 2.0 TECHNICAL SPECIFICATION: 2. OPERATION ENVIRONMENT: Area classification: Safe zone Description: Offshore/Marine environment, open deck Operation temperature range: -20 - + 45 degrees
More informationTNO Science and Industry P.O. Box 756, 5700 AT Helmond, The Netherlands Honda R&D Co., Ltd.
Proceedings, Bicycle and Motorcycle Dynamics 2010 Symposium on the Dynamics and Control of Single Track Vehicles, 20-22 October 2010, Delft, The Netherlands Application of the rigid ring model for simulating
More informationThrust ball bearings. - double direction
Thrust ball bearings Thrust ball bearings are manufactured in two versions: single and double direction. These bearings can carry single or double direction heavy axial loads. - single direction - double
More informationTyre Endurance/Low Pressure Test
Tyre Endurance/Low Pressure Test Test versions implemented by US DOT in 1960s (FMVSS 109) for use on passenger car tyres. Updated in June 2003 (FMVSS 139) to more closely represent real world worst-case
More informationThe world s first diagnostic tyre changer ere d syste
WHEEL DIAGNOSIS pow er te m The world s first diagnostic tyre changer ed sys Uniformity is the first technology that allows match-mounting to be carried out directly on the tyre changer, transforming it
More informationRotary Drilling Rig TR160D
Rotary Drilling Rig TR160D TR160D -Rotary Drilling Rig Electric system Wireless transmission system and GPS remote service Construction monitoring system The stability of drilling rig monitoring system
More informationOutput flow In l/min at 1500 min
Introduction With thru drive For single and multiple pumps Swash plate type for open circuit 1. New type of swash plate and large servo piston with strong bias spring achieves fast response, reduce the
More informationLM Guide Radial Type Model SR
LM Guide Radial Type Model Endplate LM block Grease nipple End seal LM rail 90 Ball Retainer plate Side seal (Optional) Cross section 30 Point of Selection A Point of Design Options Model No. Precautions
More informationSTC300S STC300S TRUCK CRANE 30 TONS LIFTING CAPACITY. Quality Changes the World
STC300S STC300S TRUCK CRANE 30 TONS LIFTING CAPACITY 2 COMPANY BRIFE INTRODUCTION COMPANY BRIFE INTRODUCTION 3 SANY Automobile Hoisting Machinery is one of the core business unit of Sany Heavy Industry,
More informationa measurable difference...
This testing machine with integrated steel plate welded frame structure, using single boom and double-function piston liner to load testing force and fixing specimen with cylindrical pin, load cell measuring
More informationProfessional full-automatic tire changer TC680 Features
Professional full-automatic tire changer TC680 Main shaft moveable and adjustable for wheel with different diameter and width Rim diameter range from 10in to 32in Laser light help to find proper position
More informationPiling and drilling rig LRB
Piling and drilling rig LRB 15 51.4 Concept and characteristics LRB 15 Leader top Auxiliary winch Leader 1.5 m Vertical travel device Attachment with quick connection Inclination device Leader rotation
More informationRotary Drilling Rig TR150D
Rotary Drilling Rig TR150D TR150D-Rotary Drilling Rig Electric system Wireless transmission system and GPS remote service Construction monitoring system The stability of drilling rig monitoring system
More informationJaroslav Maly & team CAE departament. AV ENGINEERING, a.s.
Design & Simulation of one axle trailer loading by 6 or 7 passenger cars - Virtual Product Development Jaroslav Maly & team CAE departament www.aveng.com Pro/ENGINEER design optimization of axle trailer
More informationBallscrews / Linear Guideway General Catalog
Ballscrews / inear Guideway General Catalog inear Guideway 2 Introduction of ach Series 2. eavy oad Type, MSA Series A. Construction Upper Retainer Carriage nd Seal nd Cap Rail Grease Nipple Ball 45 ower
More informationWHEEL BALANCERS & TYRE CHANGERS QUALITY YOU EXPECT AT A PRICE YOU WOULDN T THE STANDARD IN INFORMATION, EQUIPMENT AND DIAGNOSTICS SYSTEMS
QUALITY YOU EXPECT AT A PRICE YOU WOULDN T THE STANDARD IN INFORMATION, EQUIPMENT AND DIAGNOSTICS SYSTEMS http://diagnostics.snapon.co.uk INTRODUCTION TYRE AND WHEEL BROCHURE The Sun range of Tyre Changers
More informationTIRE BASICS GENERAL INFORMATION WHAT S INSIDE A TIRE TREAD BELTS BELT EDGE INSULATION BODY PLIES INNERLINER CASING BEAD SIDEWALL BEAD FILLER
WHAT S INSIDE A TIRE BELTS TREAD BELT EDGE INSULATION BODY PLIES INNERLINER CASING BEAD SIDEWALL The tire s INNERLINER -- keeps air inside the tire. BEAD FILLER The CASING (or CARCASS) the internal substructure
More informationStatic Servohydraulic Universal Testing Machines
Materials Testing Systems 45 Static Servohydraulic Universal Testing Machines A B C D E F G H I J K L M N O P Q R S T 46 Materials Testing Systems Static Servohydraulic Universal Testing Machines for Load
More informationPiling and drilling rig LRB Courtesy of Machine.Market
Piling and drilling rig LRB 16 EN 51.6 Concept and characteristics LRB 16 Leader top Auxiliary winch Leader 1.5 m Leader vertical travel device Attachment with quick connection Leader inclination device
More informationIdentification of A Vehicle Pull Mechanism
Seoul 2000 FISITA World Automotive Congress June 12-15, 2000, Seoul, Korea F2000G353 Identification of A Vehicle Pull Mechanism Sang-Hyun Oh*, Young-Hee Cho, Gwanghun Gim Vehicle Dynamics Research Team,
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationWHEEL AND TIRE GROUP CONTENTS WHEEL AND TIRE DIAGNOSIS WHEEL AND TIRE SPECIFICATIONS ON-VEHICLE SERVICE...
31-1 GROUP 31 CONTENTS.... 31-2 DIAGNOSIS........................ 31-2 WHEEL BALANCE ACCURACY........ 31-3 ON-VEHICLE SERVICE........... 31-7 TIRE INFLATION PRESSURE CHECK... 31-7 TIRE WEAR CHECK..................
More informationGTZ-2000 SERIES. Multi-tasking Turning Centers
GTZ-2000 SERIES Multi-tasking Turning Centers Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
More informationSPECIFICATION FOR APPROVAL
THINKING ELECTRONIC INDUSTRIAL CO., LTD. HEAD OFFICE: 8F-1, No.93, Ta-Shun 1st Rd., Kaohsiung, Taiwan TEL: 886-7-5577660 FAX: 886-7-5570560 MANUFACTURING SITE KAOHSIUNG FACTORY: No.51, Kaifa Road, Nantze
More informationTheory of Machines. CH-1: Fundamentals and type of Mechanisms
CH-1: Fundamentals and type of Mechanisms 1. Define kinematic link and kinematic chain. 2. Enlist the types of constrained motion. Draw a label sketch of any one. 3. Define (1) Mechanism (2) Inversion
More informationProduct Range and Applications
Product Range and Applications Registered ISO 9001:2000 201203 Version Special features of TY Cushion Tire Superior Structure Design TY Cushion Tire derive their sturdy structure from a specially prepared
More informationPicture 1a: Model CD1 1-5t H=6-9m Model CD1 0.5t H-6-12m
ⅠApplicable scope Model is a kind of electric rope hoist of light and mini type hoisting equipment. It can be used on single beam crane in I-shaped bridge type or straight/curved single rail I-beam bridge
More information01 Car Lifts
0404 01 Car Lifts 05 2 POST LIFT KET-4000G KET-4000 Model KET-4000G KET-4000 Capacity 4,000 kg 4,000 kg Max Lifting Height 1,870-1,900mm 1,870-1,900mm Min Lifting Height 130-210mm 130-210mm Lifting speed
More informationHS CYCLIC CUM STATIC TRIAXIAL TEST SYSTEM
HS28.610 CYCLIC CUM STATIC TRIAXIAL TEST SYSTEM Meets the essential requirements of ASTM-5311/3999 Introduction The system is a highly advanced combination of hydraulic and pneumatic technology where σ1
More informationGTZ SERIES. Multi-tasking Turning Centers
GTZ SERIES Multi-tasking Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining requirements
More informationLow Profile Air Gripper. Series MHF2. Low profile air gripper with space-saving design is newly released. 5-77
Low Profile Air Gripper Low profile air gripper with space-saving design is newly released. 5-77 Low Profile Air Gripper Height is approximately / the size of an equivalent Series MHZ2. MHZ2-D 42 Bore
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationLecture 19. Magnetic Bearings
Lecture 19 Magnetic Bearings 19-1 Magnetic Bearings It was first proven mathematically in the late 1800s by Earnshaw that using only a magnet to try and support an object represented an unstable equilibrium;
More information12.5 Ball Chain Type, SME Series
12.5 Ball Chain Type, SME Series A. Construction Carriage End Cap End Seal Grease Nipple Inner Seal Ball Bottom Seal Ball Chain 45 Rail 45 B. Characteristics The ball chain type linear guideway, SME series,
More informationGet Your Done Anywhere In The World
Get Your Done Anywhere In The World Table of Contents 1 Outline of OFF-THE-ROAD TIRES 3 Tire Maintenance TRA Classification of OFF-THE-ROAD TIRES...2 Tread Pattern...2 Tread Thickness...3 Construction
More informationLM Guide Actuator KR. For details, visit THK at CATALOG No E. Product information is updated regularly on the THK website.
LM Guide Actuator KR For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG No.209-10E Integrated LM Guide and all Screw High-rigidity / High-precision
More informationKato CR-200 Ri. 20 t All Terrain Crane. Tel: Fax:
Kato CR-200 Ri 20 t All Terrain Crane 1565 3165 2965 2245 1665 200 200 1575 350 10 1880 5 13. 350 3210 Min: 6500 Max: 28000 Stroke: 21500 1685 6940 3345 2115 3250 8710 Ramp break over : 23゚ When the suspension
More informationHydraulic Caliper Disc Brakes SFRA 5
BRAKE SYSTEMS FOR WIND ENERGY Rotor Brake (active) Hydraulic Caliper Disc Brakes SFRA 5 25 PINTSCH BUBENZER is certified according to DIN EN ISO 9001:2000 SFRA 5 (µ = 0,4) SFRA 5 (µ = 0,3) SFRA 5 (µ =
More informationTechnical data Piling and drilling rig LRB 125
Piling and drilling rig LRB 125 Concept and characteristics Leader top Auxiliary winch Leader Vertical travel device Tool with quick connection Inclination device Leader rotation device Parallel kinematics
More information10 Thrust ball bearings
Rolling bearings 10 Thrust ball bearings Designs and variants... 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages... 1010 Bearings with sphered housing
More informationFig. 1 Two stage helical gearbox
Lecture 17 DESIGN OF GEARBOX Contents 1. Commercial gearboxes 2. Gearbox design. COMMERICAL GEARBOX DESIGN Fig. 1 Two stage helical gearbox Fig. 2. A single stage bevel gearbox Fig. 4 Worm gearbox HELICAL
More informationChapter 2 Dynamic Analysis of a Heavy Vehicle Using Lumped Parameter Model
Chapter 2 Dynamic Analysis of a Heavy Vehicle Using Lumped Parameter Model The interaction between a vehicle and the road is a very complicated dynamic process, which involves many fields such as vehicle
More informationRoller Follower General Catalog
General Catalog A Product Descriptions Features and Types... A20-2 Features of the... A20-2 Structure and Features... A20-2 Types of the... A20-3 Types and Features... A20-4 Point of Selection... A20-6
More informationCorporation. New & Used Machinery
ES ESteel Corporation. New & Used Machinery #101, 576-8, E-Dong, Sangrok-Gu, Ansan-City, Gyeonggi Provence, South Korea Tel : +82 31 407 1144 FAX : +82 31 407 1157 http://www.esteelcorp.com e-mail : machinery@esteelcorp.com
More informationBall. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR
Caged all LM Guide Actuator Model Inner block all screw shaft Grease nipple Outer rail all cage all Structure and Features Fig.1 Structure of Caged all LM Guide Actuator Model Caged all LM Guide Actuator
More information