The product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice.

Size: px
Start display at page:

Download "The product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice."

Transcription

1

2

3 Wheel gears... 3 Axial piston pumps... 3 Axial piston motors... 3 Winches... 4 Radial piston pumps... 4 Radial piston motors... 4 Slewing rings... 5 Gear pumps... 5 Gear flow dividers... 5 Cylinders... 6 Orbit motors... 6 Directional control valves... 6 Proportional solenoid valves... 7 Hand pumps... 7 Mini power packs... 7 Power packs... 8 Worm speed reducers... 8 Testing benches... 8 Conversion factors... 9 Hydraulic formulae...11 The product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice.

4 WHEEL GEARS SERIES GW GT Planetary gearboxes for wheeled and tracked crawler machines Max. output torque: wheel: 7.8 to 30 knm track: 30 to 100 knm Max. input speed: 3500 rpm Braking input torque: wheel: 260 to 800 Nm track: 330 Nm to 1200 Nm Min. release pressure: 1,2 MPa to 5 MPa AXIAL PISTON PUMPS SERIES PV10A Axial piston pumps swashplate design variable displacement for open circuit Displacements: cm3/rev Max. working pressure: int.: 35 MPa to 32 MPa cont.: 28 to 25 MPa Max. speed: int.: 3900 to 2200 rpm cont.: 3600 to 1800 rpm Max. power: 15.7 to 118 kw Controls: pressure pressure and flow pressure, flow and power pressure and flow electronic displacement, pilot pressure-related AXIAL PISTON MOTORS SERIES MF2 Bent axis piston motor fixed displacement Displacements: cm3/rev Max. working pressure: int.: 40 MPa cont.: 35 MPa Max. speed: int.: 8800 to 5200 rpm max. cont.: 8800 to 4700 rpm min.: 300 rpm Max. power: int.: from 54 to 285 kw max. cont.: 20 to 135 kw 3

5 WINCHES SERIES NH Hydraulic winches Pull (1 st layer): 20 kn to 500 kn Min. rope speed (1 st layer): 5 m/min to 29 m/min Max. rope speed (1 st layer): 18 m/min to 100 m/min Rope diameter: 14 mm to 50 mm Hydraulic motor: MF2P (plug-in) series RADIAL PISTON PUMPS SERIES PR Radial piston pumps oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of shaft Displacement: 1,21 cm 3 /rev to 9,9 cm 3 /rev Max. continuous pressure: 20 MPa to 55 MPa Number of pumping elements: Speed: 300 rpm to 2000 rpm Output flow (at 1450 rpm): 1,5 L/min to 13,6 L/min Input power requirement (at 1450 rpm): 0,17 kw to 8,5 kw RADIAL PISTON MOTOR SERIES MC MS Radial piston motors crankshaft and star-shaped design Displacement: 40 cm 3 /rev to 8000 cm 3 /rev Max. continuous pressure: 16 MPa to 25 MPa Max. continuous speed: 80 rpm to 1000 rpm Peak power: 20 kw to 400 kw 4

6 SLEWING RINGS SERIES RS Slewing rings complete with ring gear, worm gear, bearings and orbit motor Ratio: 1:60 1:85 1:103 Rotary table speed: 1 rpm Continuous torque: 1,8 knm to 4,5 knm Peak torque: 2,7 knm to 5,6 knm Transmissible power: 0,2 kw to 0,5 kw GEAR PUMPS SERIES PG Gear pumps cast iron and aluminum Displacement: 0,8 cm 3 /rev to 125 cm 3 /rev Max. working pressure: cont.: 14 MPa to 28 MPa int.: 18 to 29 MPa peak: 20 to 30 MPa Max. speed: 2000 rpm to 4000 rpm Min. speed: 400 rpm to 1000 rpm All kinds of flanges, shafts and ports. GEAR FLOW DIVIDERS SERIES DF Gear flow dividers cast iron and aluminum Displacement: 2,1 cm 3 /rev to 125 cm 3 /rev Max. continuous pressure: 14 MPa to 28 MPa Max. speed: 1500 rpm to 4000 rpm 5

7 CYLINDERS SERIES CH Hydraulic cylinders Available bores: 25 mm to 200 mm Working pressure: 21 MPa Max. pressure: 25 MPa Optional accessories: according to standards ISO / DIN; special accessories ORBIT MOTORS SERIES MH Orbit motors gerotor and geroller design Displacement: 8 cm3/rev to 800 cm3/rev Max. working pressure: cont.: 7 MPa to 20 MPa int.: 13 to 24 MPa peak: 14 to 28 MPa Oil flow: 16 L/min to 200 L/min Max. output: 2 kw to 64 kw Optional features: wheel mount short version integrated brake speed sensor free running low leakage low speed corrosion resistant shaft high pressure seals high temperature seals DIRECTIONAL CONTROL VALVES SERIES VD Directional control valves monoblock and modular Max. flow: 1 to 12 Flow: 35 L/min to 200 L/min Max. pressure: 35 MPa to 40 MPa 6

8 PROPORTIONAL SOLENOID VALVES SERIES VS Proportional solenoid valves AC and DC Number of ports: 3 4 A, (B,) P ports max. operating pressure: 32 MPa T port max. operating pressure: 16 MPa 21 MPa (DC only) Max. flow: 60 L/min 120 L/min DC voltages: 12 V 24 V 42 V 60 V 96 V 110 V 180 V 205 V 220 V AC voltages (50/60 Hz): 42 V 110 V 230 V Power consumption: 26 W to 35 W Duty cycle: 100% HAND PUMPS SERIES PM Hand pumps Working pressure: 35 MPa to 100 MPa Flow capacity: 1,25 cm 3 /stroke to 2,8 cm 3 /stroke Oil tank capacity: 250 cm 3 to 1,2 dm 3 MINI POWER PACKS SERIES WM Hydraulic mini power packs Tank capacity: 0,5 L to 25 L, plastic or metal Electric motor power: 350 W to 3 kw Electric motor voltage: 12 V 24 V 48 V Pump types: 0,25 to 9,8 cm 3 /rev gear pump group 0,5/1 Max. flow: 22 L/min Max. pressure: 21 MPa to 29 MPa 7

9 POWER PACKS SERIES WS Power packs Tank capacity: 40 L 80 L 160 L 240 L Electric motor power: 2,2 kw to 11 kw (22 kw on request) Pump types: 4 cm3/rev to 25 cm3/rev gear pumps; 8 cm3/rev to 22 cm3/rev variable displacement piston pumps Max. flow: 36 L/min to 61 L/min Max. pressure: 21 MPa 25 MPa WORM SPEED REDUCERS SERIES RW Worm speed reducers Min. torque: 25 Nm to 445 Nm Max. torque: 40 Nm to 640 Nm Min. power: 0,05 kw to 0,65 kw Max. power: 0,75 kw to 10,0 kw Ratio: 1:100 to 1:7 TESTING BENCHES Gear pumps/motors testing bench Pumps/motors testing bench Pump covers testing bench Power steerings testing bench Mobile valves testing bench Valves testing bench 8

10 CONVERSION FACTORS LENGTH m ft cm in km mi 1,000 3, ,0 39,37 0, , ,048 1,000 30,48 12,00 0, , , , ,000 0,3937 0, , , , ,540 1,000 0, , ,000 0, ,609 1,000 VOLUME L ft 3 cm 3 in 3 US gal US qt 1,000 0, ,02 0,2642 1,057 28,32 1, ,481 29,92 0, , ,000 0, , , , , ,39 1,000 0, , , ,000 4,000 0,9464 0, ,4 57,75 0,2500 1,000 VELOCITY m/s ft/s km/h mph ft/min 1,000 3,281 3,600 2, ,85 0,3048 1,000 1,097 0, ,00 0,2778 0,9113 1,000 0, ,68 0,4470 1,467 1,609 1,000 88,00 0, , , , ,000 FORCE N kgf lbf 1,000 0,1020 0,2248 9,807 1,000 2,205 4,448 0,4536 1,000 MASS kg lb 1,000 2,205 0,4536 1,000 9

11 CONVERSION FACTORS PRESSURE MPa bar kpa kg/mm 2 kg/cm 2 PSI 1,000 10, , ,20 145,0 0,1000 1, ,0 0, ,020 14,50 0, , ,000 0, , ,1450 9,807 98, , , , , ,07 0, ,000 14,22 0, , ,895 0, , ,000 ENERGY J kwh hph kgf m ft lbf in lbf 1,000 0, , ,1020 0,7376 8, ,000 1, ,7461 1, ,807 0, , ,000 7,233 86,80 1,356 0, , ,000 12, ,3141 0, , ,000 TORQUE W kw hp ft lb/s in lb/s 1,000 0, , ,7376 8, ,000 1, , ,460 1, , ,356 0, , ,000 12,00 0,1130 0, , , ,000 POWER Nm danm kgf m ft lbf in lbf 1,000 0,1000 0,1019 0,7376 8,851 10,00 1,000 1,019 7,376 88,51 9,807 0,9807 1,000 7,233 86,80 1,356 0,1356 0,1382 1,000 12,00 0,1130 0, , , ,000 10

12 HYDRAULIC FORMULAE FOR HYDRAULIC PUMPS Flow [L/min] Pressure [Bar] Input power [kw] = 600 Output flow [L/min] = Displacement [cm 3 /rev] Speed [rpm] 1000 FOR HYDRAULIC MOTORS Torque [Nm] Speed [rpm] Output power [kw] = 9549 Shaft torque [Nm] = Pressure [bar] Displacement [rpm] 62,83 Shaft speed [rpm] = Flow [L/min] 1000 Displacement [cm 3 /rev] FOR HYDRAULIC CYLINDERS Diameter2 0,7854 [mm2] Pressure [bar] Area [mm 2 ] Pressure [bar] Force [N] = = Speed [mm/s] = Flow [L/min] 21,22 Diameter 2 (mm 2 ) 11

13 12 NOTES

14 13 NOTES

15

16

MOTOR SCM M2

MOTOR SCM M2 MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.

More information

SCM M2. Other advantages:

SCM M2. Other advantages: Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical

More information

Drilling Rig LB enus LB

Drilling Rig LB enus LB Drilling Rig LB 36-41 enus LB 25.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment

More information

DeltaBase 102 Technical Data Sheet

DeltaBase 102 Technical Data Sheet Release Date: Sept 16th 2008 Page 1 of 6 PRODUCT OVERVIEW The DeltaBase 102 Anchor drill rig for double-head drilling systems, rotary / percussion operations is specially designed for the following key

More information

Drilling Rig LB enus LB

Drilling Rig LB enus LB Drilling Rig LB 44-51 enus LB 26.5 Concept and characteristics Leader top for Kelly rope (drilling axis - 4.6 ft) Leader top for auxiliary rope Kelly rope Kelly Inclination device Crowd winch Rotary (drilling

More information

Drilling Rig LB enus LB

Drilling Rig LB enus LB Drilling Rig LB 28-32 enus LB 24.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment

More information

Engineering Product & System Guide

Engineering Product & System Guide HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:

More information

Fixed Displacement Bent Axis Axial Piston Motors TMB 700

Fixed Displacement Bent Axis Axial Piston Motors TMB 700 HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC

More information

MOTOR SCM ISO

MOTOR SCM ISO MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results

More information

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact

More information

Drilling Rig LB LB Courtesy of Crane.Market

Drilling Rig LB LB Courtesy of Crane.Market Drilling Rig LB 36-41 EN LB 25.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment

More information

Drilling Rig LB LB

Drilling Rig LB LB Drilling Rig LB 28-32 EN LB 24.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment

More information

SCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.

SCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor

More information

R 4350L R 2500L R 2050L R 3100L. model

R 4350L R 2500L R 2050L R 3100L. model radial piston motors fixed displacement, high torque, low speed 200L 450L 740L 1000L 1350L displacement cm 3 188 442 740 983 1.344 1.639 2.050 2.470 3.080 4.310 5.310 6.800 6.800 11.600 rated pressure

More information

Drilling Rig LB LB

Drilling Rig LB LB Drilling Rig LB 2-23 EN LB 22.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary winch Radius adjustment

More information

Bonny Hydraulic Motor Hydraulic Orbital Motor, Manufacturer, Supplier, Factory, Exporter in china

Bonny Hydraulic Motor Hydraulic Orbital Motor, Manufacturer, Supplier, Factory, Exporter in china Bonny Hydraulic Motor Hydraulic Orbital Motor, Manufacturer, Supplier, Factory, Exporter in china BM1-OMP series orbital hydraulic motor Model BM1 Series Replace for Sauer Danfoss OMP, Eaton, Parker, White

More information

SCM DIN. Other advantages:

SCM DIN. Other advantages: SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design

More information

Series TMM Axial Piston Motor. Technical Information

Series TMM Axial Piston Motor. Technical Information Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer

More information

GENERAL INFORMATION HYDRAULIC MOTORS ITALY

GENERAL INFORMATION HYDRAULIC MOTORS ITALY GENERAL INFORMATION INTERMOT produces RADIAL PISTON since 1985: our yearly production is more than 13.000 units which we sell all over the world through our agents and authorized sellers. Our motor range

More information

Technical data Rotary drilling rig LB

Technical data Rotary drilling rig LB Technical data Rotary drilling rig LB 24-27 Concept and characteristics LB 24 Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary

More information

TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E

TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

Ground bearing pressure 1.14 kg/cm 2. Main boom (No xx) max. length High reach (1311.xx and 1008.xx) 83 m Luffing jib (No xx) max.

Ground bearing pressure 1.14 kg/cm 2. Main boom (No xx) max. length High reach (1311.xx and 1008.xx) 83 m Luffing jib (No xx) max. The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 14 m main boom, consisting of A frame, boom foot (5.5 m), boom head (8.5 m), 32.3 t basic counterweight, 15 t carbody

More information

Brochure Hydraulic Pumps, Hydraulic Parts

Brochure Hydraulic Pumps, Hydraulic Parts www.hidrocel.com.tr 2013 Brochure Hydraulic s, Hydraulic Parts Product Group Bent Axis s Piston s PBA s 2PBA s PBX s Gear s PA s PH s Power Take Off HDP s PTO Adapter, Valve, Cardan Shaft www.hidrocel.com.tr

More information

Piling and drilling rig LRB 18. enus LRB

Piling and drilling rig LRB 18. enus LRB Piling and drilling rig LRB 18 enus LRB 51.6 Concept and characteristics LRB 18 Leader top Auxiliary winch Leader 49. ft Leader vertical travel device Attachment with quick connection Leader inclination

More information

6. Working radii are measured from centre of swing and under load.

6. Working radii are measured from centre of swing and under load. The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 20 m main boom, consisting of A frame, boom foot (7 m), boom head (7 m), boom extension (6 m), 60.6 t basic counterweight,

More information

Ground bearing pressure 1.08 kg/cm 2. Main boom (No xx) max. length High reach (No xx and 1309.xx)

Ground bearing pressure 1.08 kg/cm 2. Main boom (No xx) max. length High reach (No xx and 1309.xx) The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 17 m main boom, consisting of A frame, boom foot (7 m), boom head (10 m), 50.9 t basic counterweight, 20 t carbody

More information

5. For max. wind speed please refer to lift chart in operator s cab or manual.

5. For max. wind speed please refer to lift chart in operator s cab or manual. The operating weight includes the basic machine with crawlers, 2 main winches 120 kn including wire ropes (260 m and 495 m) and 20 m main boom, consisting of A frame, boom foot (10 m), boom head (7 m),

More information

Spool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds.

Spool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. Spool Valve Hydraulic Motors Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i Spool Valve Motors Highlights Product Description Char-Lynn spool

More information

OMP Hydraulic Motor Versions

OMP Hydraulic Motor Versions Versions VERSIONS Mounting flange Shaft Port size European version US version Side port version End port version Flange port version G 1 /2 X X X No No OMP Cyl. 25 mm G 1 /2 X X X Yes No OMP G 1 /2 X X

More information

High Pressure Gear Motors KM 5

High Pressure Gear Motors KM 5 High Pressure Gear Motors KM 5 2 KRACHT GmbH Gewerbestr. 20 58791 Werdohl, Germany fon +49(0)2392/935-0 fax +49(0)2392/935 209 mail info@kracht.eu web www.kracht.eu Construction 1 Housing 2 Gearing 3 Drive

More information

C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11

C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11 C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic

More information

BENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3

BENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3 ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 HPM pag.3 TECHNICAL FEATURES ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 TECHNICAL FEATURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80

More information

Section 10 Chapter 20

Section 10 Chapter 20 Section 10 Chapter 20 24 Valve, 8.3 Liter Engine Specifications Note: All coding used in the 8.3 Liter and 9 Liter engine manuals are Cuins engine codes. These engine codes have no meaning to New Holland

More information

Drilling Rig LB LB

Drilling Rig LB LB Drilling Rig LB 16-18 EN LB 1.6 Concept and characteristics Leader top for Kelly rope Leader top for auxiliary rope Kelly rope Kelly Rotary Inclination device Special "Low Head" Auxiliary winch Standard

More information

DeltaBase 540 Technical Data Sheet

DeltaBase 540 Technical Data Sheet Release Date: May 10th, 2008 Page 1 of 7 PRODUCT OVERVIEW The DeltaBase 540 is a powerful and versatile Multipurpose drill rig. With the ability to perform coring, DTH drilling, rotary flush, auger drilling

More information

TMVW Orbital Motors. Technical Information

TMVW Orbital Motors. Technical Information Orbital Motors Technical Information A Wide Range of Orbital Motors A Wide Range of Orbital Motors F300030 Tif Sauer-Danfoss is a world leader within production of low speed orbital motors with high torque.

More information

AXIAL PISTON MOTORS MF S E R I E S 2 0 C L O S E D C I R C U I T

AXIAL PISTON MOTORS MF S E R I E S 2 0 C L O S E D C I R C U I T AXIAL PISTON MOTORS MF GENERAL DESCRIPTION Axial piston fixed displacement motors, Series 20, are of swash plate construction with preset displacement, and are intendent for closed circuit operation. The

More information

2. Crane standing on firm, horizontal ground.

2. Crane standing on firm, horizontal ground. The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs and 46 ft main boom, consisting of A frame, boom foot (18 ft), boom head (28 ft), 71,200 lbs basic counterweight,

More information

US version. Drain connection

US version. Drain connection Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT

More information

Orbital Motors Type OMP, OMR and OMH. Technical Information

Orbital Motors Type OMP, OMR and OMH. Technical Information Orbital Motors Type OMP, OMR and OMH Technical Information OMP, OMR and OMH A Wide Range of Hydraulics Motors F 301 245 A Wide Range of Hydraulic Motors Sauer-Danfoss is a world leader within production

More information

EC380EHR, EC480EHR VOLVO EXCAVATORS

EC380EHR, EC480EHR VOLVO EXCAVATORS , VOLVO EXCAVATORS Volvo, E480EHR in detail. Engine The latest generation, Volvo engine Tier 4f (Stage IV) emissions compliant diesel engine fully meets the demands of the latest, emsissions regulations.

More information

Drilling Rig LB LB

Drilling Rig LB LB Drilling Rig LB 4-7 EN LB 3.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary winch Radius adjustment

More information

CH 650. Self-Erecting Hydraulic Piling Rig. High Tech Line

CH 650. Self-Erecting Hydraulic Piling Rig. High Tech Line CH 650 Self-Erecting Hydraulic Piling Rig High Tech Line CH 650 The Comacchio self-erecting rigs are available in CPD (Cilynder Pull Down) and WPD (Winch Pull Down) versions and both are designed for easy

More information

LM30 Drill Series TECH DATA

LM30 Drill Series TECH DATA DRILLING DEPTH GUIDELINES The figures in these tables have been calculated, based on field experiences, and may be reasonably expected. Actual drilling capacity will depend on in-hole tools and conditions,

More information

TECHNICAL CATALOGUE FD/FDM FDM

TECHNICAL CATALOGUE FD/FDM FDM l. ORS TECHNICAL FLOW DIVIDERS DATA FD/FDM MODEL SERIES TECHNICAL CATALOGUE FD FD bar FDM bar FDM INDEX GENERAL INFORMATION rpm - - - 950 - - - - - 950 - - - - - 950 - - - - - 0 - - - - - 0 - - - - - 750

More information

Piling Rig LRH 100 LRH

Piling Rig LRH 100 LRH Piling Rig LRH 1 EN LRH 31.5 Concept and characteristics LRH 1 Dimension and weights LRH 1 18.4 18.4 18.4 18.4 19 1998-243 6 45 875 368 R 376 9 44 545 Technical data Total height 19.98-24.3 m Max. pile

More information

OMEW Standard and with Low Speed Option. Orbital Motors. Technical Information

OMEW Standard and with Low Speed Option. Orbital Motors. Technical Information Standard and with Low Speed Option Orbital Motors Technical Information Contents Revision History Table of Revisions Date Page Changed Rev Jan 2009 Many major change BA Mar 2010 16 Japan location BB Contents

More information

2PBA Pumps have the following advantages ;

2PBA Pumps have the following advantages ; 2PBA Bent Axis Piston Pump 2PBA Pumps have the following advantages ; Compact Design, Economical Conception, High Power Density, High Overall Efficiency, High Rotating Speeds, High Output Pressure, 35

More information

Variable displacement axial piston pumps,

Variable displacement axial piston pumps, LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar

More information

2. Crane standing on firm, horizontal ground. 6. Working radii are measured from centre of swing and under load.

2. Crane standing on firm, horizontal ground. 6. Working radii are measured from centre of swing and under load. The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs including wire ropes (853 ft and 1624 ft) and 66 ft main boom, consisting of A frame, boom foot (33 ft), boom head

More information

Variable displacement axial piston pump type V30D

Variable displacement axial piston pump type V30D Variable displacement axial piston pump type V30D for open circuit Pressure p max Displacement V max = 420 bar (6000 psi) = 260 cm 3 /rev (16.16 cu in/rev) 1.2 1. General description The axial piston variable

More information

OSPB, OSPC, OSPR, OSPD Open Center Steering units OSPB Closed Center Steering units TAD Torque amplifiers. Technical Information

OSPB, OSPC, OSPR, OSPD Open Center Steering units OSPB Closed Center Steering units TAD Torque amplifiers. Technical Information OSPB, OSPC, OSPR, OSPD Open Center Steering units OSPB Closed Center Steering units TAD Torque amplifiers Technical Information A wide range of steering components A WIDE RANGE OF STEERING COMPONENTS F300599

More information

Up to serial number AH From serial number AH00611 Product. Yanmar diesel engine Type Yanmar 3TNV 88-SNS Yanmar 3TNV88-BSNS Design

Up to serial number AH From serial number AH00611 Product. Yanmar diesel engine Type Yanmar 3TNV 88-SNS Yanmar 3TNV88-BSNS Design 6 6.1 Model 2503 Engine Engine Model 2503 Tier II Tier III Up to serial number AH00610 From serial number AH00611 Product Yanmar diesel engine Type Yanmar 3TNV 88-SNS Yanmar 3TNV88-BSNS Design Water-cooled

More information

Piling and drilling rig LRB

Piling and drilling rig LRB Piling and drilling rig LRB 15 51.4 Concept and characteristics LRB 15 Leader top Auxiliary winch Leader 1.5 m Vertical travel device Attachment with quick connection Inclination device Leader rotation

More information

Piling and drilling rig LRB Courtesy of Machine.Market

Piling and drilling rig LRB Courtesy of Machine.Market Piling and drilling rig LRB 16 EN 51.6 Concept and characteristics LRB 16 Leader top Auxiliary winch Leader 1.5 m Leader vertical travel device Attachment with quick connection Leader inclination device

More information

Ton Telescopic Boom Crawler Crane

Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY BOOM 77 ton at 10 feet (70t at 3.0m) 4-section, 37 6 111 6 (11.4 m 34.0 m) DIMENSION Overall Length 48 3 (14.94 m) Overall Width (tracks extended) 18 8 (5.69 m) Overall Width

More information

Variable Displacement Motor AA6VM (A6VM)

Variable Displacement Motor AA6VM (A6VM) Variable Displacement otor 6V (6V) Series 6, for open and closed circuits xial tapered piston - bent axis design 5800 psi Sizes 28 1000 Nominal Pressure up to (400 bar) Peak Pressure up to 6500 psi (450

More information

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

General 4-stroke direct injected, turbocharged and aftercooled diesel engine General 4-stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front Bore Stroke Compression

More information

Technical data Drilling rig LB 16

Technical data Drilling rig LB 16 Technical data Drilling rig LB 16 Concept and characteristics Leader top for auxiliary rope Leader top for Kelly rope Kelly Kelly rope Tensioning cylinder for crowd system Rotary Inclination device Casing

More information

GEARBOX RP3 RP3A WX6 WX10 WX20

GEARBOX RP3 RP3A WX6 WX10 WX20 WHEEL UNITS RPC3 COMPACT WHEEL DRIVE integrated motor gearbox unit hub dia. 235 mm available also with brake RPC3 RPC3A RPC3DF RPC3ADF Nom. Displ. cc/rev 700 900 1000 1200 1400 1500 1700 2000 2200 Peak

More information

Hydraulic gear pumps and motors

Hydraulic gear pumps and motors PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.

More information

SONICOR 50K DRILL HEAD

SONICOR 50K DRILL HEAD SONICOR 50K DRILL HEAD The SONICOR 50K sends high frequency mechanical oscillations down the drill string to the bit. The operator controls frequencies to suit specific conditions of soil/rock geology.

More information

LX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview. Copyright 2011 Boart Longyear. All rights reserved.

LX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview. Copyright 2011 Boart Longyear. All rights reserved. LX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview LX 4 GEO-TECHNICAL DRILL HIGH DRILLING POWER IN A SMALL PACKAGE, THE MULTIPURPOSE LX 4 IS AN ESSENTIAL TOOL ON TODAY'S JOB SITE Power and Versatility

More information

Piling and drilling rig LRB 355. enus LRB

Piling and drilling rig LRB 355. enus LRB Piling and drilling rig LRB 355 enus LRB 54.5 Concept and characteristics LRB 355 Leader top adjustable incl. aux. winch 18, lbf Vertical travel device Leader 7.8 ft Inclination device Attachment with

More information

Doosan Infracore DX55W TECHNICAL DATA

Doosan Infracore DX55W TECHNICAL DATA Doosan Infracore Construction Equipment DX55W TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Yanmar 4TNV98-E NUMBER OF CYLINDERS 4 RATED FLYWHEEL POWER hp / rpm 56.8 / 2,400 (hp PER SAE

More information

OML and OMM Orbital motors. Technical Information

OML and OMM Orbital motors. Technical Information OML and OMM Orbital motors Technical Information OML and OMM A wide range of orbital motors F300030.TIF A WIDE RANGE OF ORBITAL MOTORS Sauer-Danfoss is a world leader within production of low speed orbital

More information

Piling and drilling rig LRB 16 LRB

Piling and drilling rig LRB 16 LRB Piling and drilling rig LRB 16 EN LRB 51.6 Concept and characteristics LRB 16 Leader top Auxiliary winch Leader 1.8 m Leader vertical travel device Attachment with quick connection Leader inclination device

More information

Pumps. Pumps GoTo Europe

Pumps. Pumps GoTo Europe Pumps GoTo Europe 7 Pumps Axial piston pumps Axial piston pumps in swash plate and bent axis design are intended for the medium and high pressure range. Variations in the designs, in the performance ranges

More information

Shown with optional blade. SP-D6M/N LGP Pipelayer

Shown with optional blade. SP-D6M/N LGP Pipelayer Shown with optional blade SP-D6M/N LGP Pipelayer Max lift capacity Operating weight Net flywheel power 25,000 kg / 55,115 lb 24,680 kg / 54,409 lb 104 kw / 140 HP SP-D6M/N LGP PIPELAYER ABOUT THE SP-D6M/N

More information

Gear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs

Gear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of

More information

DRILLING DEPTH GUIDELINES DRILL ROD Hole Depth METRIC Hole Depth U.S. Width mm 7,5 ft. Height mm 11,9 ft

DRILLING DEPTH GUIDELINES DRILL ROD Hole Depth METRIC Hole Depth U.S. Width mm 7,5 ft. Height mm 11,9 ft DRILLING DEPTH GUIDELINES DRILL ROD Hole Depth Hole Depth 76 mm 280 m 918 ft BASE FRAME ASSEMBLY / UNDERCARRIAGE Weight of the Rig 12.600 kg 27.778 lb Length 7.100 mm 23,3 ft Width 2.300 mm 7,5 ft Height

More information

Piling Rig LRH 100 LRH

Piling Rig LRH 100 LRH Piling Rig LRH 1 EN LRH 31.5 Concept and characteristics LRH 1 Leader top Leader top for auxiliary rope Auxiliary rope Leader Leader ball joint Hydraulic hammer Rope guide Boom Radius adjustment device

More information

TELESCOPIC BOOM CRAWLER CRANE 45 TON CAPACITY

TELESCOPIC BOOM CRAWLER CRANE 45 TON CAPACITY TELESCOPIC BOOM CRAWLER CRANE 9010 45 TON CAPACITY VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel

More information

Truck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps

Truck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps Series F1, F2, T1 Fixed Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Hydraulic Pumps,

More information

Piling and drilling rig LRB

Piling and drilling rig LRB Piling and drilling rig LRB 355 54.5 Concept and characteristics LRB 355 Leader top adjustable incl. aux. winch 8 t Vertical travel device Leader. m Inclination device Attachment with quick connection

More information

Orbital Motors OMS, OMT and OMV Orbital Motors

Orbital Motors OMS, OMT and OMV Orbital Motors MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 214 Converted

More information

Technical data Drilling rig LB 24

Technical data Drilling rig LB 24 Technical data Drilling rig LB 24 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly bar Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Inclination device

More information

77 Ton Tele-Boom Crawler Crane. mantiscranes.com

77 Ton Tele-Boom Crawler Crane. mantiscranes.com 15010 77 Ton Tele-Boom Crawler Crane mantiscranes.com VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel

More information

Robbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter

Robbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter Robbins 34RH Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter 1 Raising the bar in versatility The Robbins 34RH is a low profile, lightweight raise drill rig for holes of

More information

2. Crane standing on firm, horizontal ground.

2. Crane standing on firm, horizontal ground. The operating weight includes the basic machine with HD undercarriage, 2 main winches 200 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, pulley block, boom foot (5.5 m) and boom

More information

Technical data Hydraulic lift crane LR 1160

Technical data Hydraulic lift crane LR 1160 Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600

More information

Technical data Hydraulic lift crane LR 1160

Technical data Hydraulic lift crane LR 1160 Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600

More information

INTERMOT DUAL DISPLACEMENT MOTORS

INTERMOT DUAL DISPLACEMENT MOTORS INTERMOT DUAL DISPLACEMENT MOT IAC SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATION Pag. 2 ORDERING INSTRUCTIONS MOTOR TECHNICAL DATA HYDRAULIC FLUIDS RECOMMENDATIONS INSTRUCTIONS AND ADVICES 3 4 7

More information

CH 450. High Tech Line. Self-Erecting Hydraulic Piling Rig

CH 450. High Tech Line. Self-Erecting Hydraulic Piling Rig CH 450 High Tech Line Self-Erecting Hydraulic Piling Rig CH 450 MULTIPURPOSE HYDRAULIC RIGS FOR DIFFERENT DRILLING TECHNOLOGIES. The winning solution for job sites that require fast operating times. Truly

More information

M7X / M7V Series. Swash Plate Type Axial Piston Motor. Precision Machinery Company

M7X / M7V Series. Swash Plate Type Axial Piston Motor. Precision Machinery Company Precision Machinery Company Swash Plate Type xial Piston Motor M7X / M7V Series QULITY HYDRULICS LTD WHINBNK PRK WHINBNK ROD YCLIFFE INDUSTRIL PRK NEWTON YCLIFFE CO. DURHM DL5 6Y TEL. 01325 317755 FX.

More information

S P E C I F I C A T I O N S SPEC. No. CT-2190 DATE-SEP. 2007

S P E C I F I C A T I O N S SPEC. No. CT-2190 DATE-SEP. 2007 S P E C I F I C A T I O N S SPEC. No. DATE-SEP. 2007 SPECIFICATlONS HYDRAULIC CRANE MODEL:UNIC URV554 (FOR INDONESIA) Specifications subject to change without notice. UNIC CRANE PERFORMANCE MODEL : URV554

More information

DH Technical Information. Versions. Versions

DH Technical Information. Versions. Versions Versions Versions Mounting flange Shaft Port size European version US version Side port version End port version Flange port version Standard shaft seal High pressure shaft seal Drain connection Check

More information

Fixed Plug-In Motor A2FE

Fixed Plug-In Motor A2FE Fixed Plug-In Motor 2FE RE 91 008/09.07 1/16 Replaces: 04.05 echnical data sheet Series 6 Sizes Nominal pressure/peak pressure 28 to 180 400/450 bar 250 and 355 350/400 bar Open and closed circuits Contents

More information

Hydraulic Pump Series F1plus Fixed Displacement

Hydraulic Pump Series F1plus Fixed Displacement Fixed Displacement Catalog 9129 8218-02 February 1999, GB Content General information, design 3 Specifications 4 Pump cross section 4 Pump and line selection 5 Ordering code 6 Standard versions 6 Installation

More information

IAC SERIES TECHNICAL CATALOGUE INDEX 8 DRAIN RECOMMENDATIONS 12 SHAFT SEAL FEATURES 13 FORMULAS CONVERSIONS 14

IAC SERIES TECHNICAL CATALOGUE INDEX 8 DRAIN RECOMMENDATIONS 12 SHAFT SEAL FEATURES 13 FORMULAS CONVERSIONS 14 INTERMOT Italgroup DUAL dual DISPLACEMENT displacement MOTORS motors IAC SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATION Pag. 2 ORDERING INSTRUCTIONS MOTOR TECHNICAL DATA HYDRAULIC FLUIDS RECOMMENDATIONS

More information

Ground bearing pressure. Main boom (No xx) max. length Fixed jib (No xx)

Ground bearing pressure. Main boom (No xx) max. length Fixed jib (No xx) The operating weight includes the basic machine with HD undercarriage, 2 main winches 55,200 lbs including wire ropes (295 ft) and 36 ft main boom, consisting of A frame, boom foot (18 ft) and boom head

More information

Variable displacement axial piston pumps,

Variable displacement axial piston pumps, Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350

More information

HIGH PRESSURE - pumps

HIGH PRESSURE - pumps Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group

More information

ZAXIS-2 series HYDRAULIC EXCAVATOR. Model Code : ZX10U-2 Engine Rated Power : 9.5 kw (12.8 HP) Operating Weight : kg Backhoe Bucket : 0.

ZAXIS-2 series HYDRAULIC EXCAVATOR. Model Code : ZX10U-2 Engine Rated Power : 9.5 kw (12.8 HP) Operating Weight : kg Backhoe Bucket : 0. ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code : ZX10U-2 Engine Rated Power : 9.5 kw (12.8 HP) Operating Weight : 1 110 kg Backhoe Bucket : 0.022 m 3 Versatile excavator with adjustable width for efficient

More information

Technical data Piling rig LRH 100

Technical data Piling rig LRH 100 Technical data Piling rig LRH 1 Concept and characteristics Leader top for auxiliary rope Leader top Hydraulic hammer Auxiliary rope Leader Rope guide Leader ball joint Radius adjustment device Boom Pile

More information

OMR Technical Information Versions

OMR Technical Information Versions Versions Versions Mounting flange Spigot diam,eter (front /rear end) Bolt circle diameter (BC) Shaft Port size European version US version Side port version End port version Flange port version Standard

More information

CPX-561 Pipelayer. Max lift capacity (SAE J743B) 18,200 kg / 40,123 lb Operating weight 14,152 kg / 31,200 lb Net flywheel power 78 kw / 105 HP

CPX-561 Pipelayer. Max lift capacity (SAE J743B) 18,200 kg / 40,123 lb Operating weight 14,152 kg / 31,200 lb Net flywheel power 78 kw / 105 HP CPX-561 Pipelayer Max lift capacity (SAE J743B) 18,200 kg / 40,123 lb Operating weight 14,152 kg / 31,200 lb Net flywheel power 78 kw / 105 HP CPX-561 PIPELAYER ABOUT THE CPX-561 The CPX Series are fully

More information

Heavy Duty Hydrostatic Transmissions

Heavy Duty Hydrostatic Transmissions Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck

More information

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact

More information

TELESCOPIC BOOM CRAWLER CRANE 30 TON CAPACITY

TELESCOPIC BOOM CRAWLER CRANE 30 TON CAPACITY TELESCOPIC BOOM CRAWLER CRANE 6010 30 TON CAPACITY OPTIONAL EQUIPMENT ACCESS WALKWAYS VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive

More information