Test Plan Guideline. Test Plan. These mentioned parameters

Transcription

1 Savari XL V AA Tyre 185//65x14 86H OR Parameter No. 001 Test Name Appearance Description The tire must not have any crack, warp, abrasion, shrinking, air lock, and such faults. Parameter No. 002 Test Name Sidewall Markings These mentioned parameters should be marked on the tire sidewall: manufacturer s name, maximum allowed air pressure, tread material, Radial and Tubeless word markings, speed index, and thread design Page 1

2 Savari XL V AA Tyre 185//65x14 86H OR Parameter No. 003 Test Name Dimension Properties The parameters mentioned must be measured in a random tire selecting method without any difference: Tire total depth, dimension of tire cross section. Parameter No. 004 Test Name Tire Weight Some tires in random method are selected and weighed. The difference between the heaviest and the lightest tire, should not be more than 3.5% of the medium selected tire weight. Drawing AB Kg Page 2

3 Savari XL V AA Tyre 185//65x14 86H OR Parameter No. 005 Test Name Dynamic Balance After assembling the tire on the rim, and dynamic balance has been done, each side of the tire must not be overloaded more than 60grf and sum leading for both sides must not be more than 110 grf gr 4 Parameter No. 006 Test Name Tire Endurance After the test, each side of the tire should not have any fault specially in sidewall and tread location; the test condition is declared as below: Load (Kg) = 200% load of ETRTO Velocity (Km/h) = 60 (constant) Testing time (h) = minimum 80 hours Ambient temp = 25 ±5 C Page 3

4 Savari XL V AA Tyre 185//65x14 86H OR Parameter No. 007 Test Name Efficiency in high velocity After the test, there is no fault in each side of the tire such as deformation, rip or any other faults R30 ECE Testing Condition: Minimum 5 steps Testing time = minimum `1 hour Ambient temp = 38 C ± Loading air pressure = 41 psi Parameter No. 008 Test Name Tire Uniformity RFV variation = max 9 kgf LFV variation = max 9 kgf Coniccity variation = ±8 kgf Condition of the test set: rotation of 60 rpm with loading air pressure of tire: 2 bar C Page 4

5 Savari XL V A A Tyre 185//65x14 86H OR Parameter No. 009 Test Name Puncture Resistance Min Kgf cm FMVSS109 AP Publishing Stage Parameter No. 010 Test Name Tire Resistance to Bead Unseating Min: 907 Kgf The ring is 4.5 inch and absolute loading air pressure is adapted of ETRTO Drawing 1093 Page 5

6 Savari XL V A A Tyre 185//65x14 86H OR Parameter No. 011 Test Name Radial first harmonic high point (red point) The Scope of this point marking on the tire is identification of high point for introducing RFV and finally the matching all of forces together. Drawing 1093 Parameter No. 012 Test Name Road Test After the above mentioned tests, some tires chosen in random method for the road test. The results must be near to the reference tire test results with minimum difference. Drawing Page 6