Group 2 Thermoplastic Hoses Teflon Hoses Water Jetting Hoses
|
|
- Bryce Boone
- 5 years ago
- Views:
Transcription
1 Group Thermoplastic Hoses Teflon Hoses Water Jetting Hoses
2 IND Page Contents 3-5 Selection Tables for Hoses and s 6 Micro Hoses, 00N, Mini Control System thermo-plastic 7 Teflon Hoses (PTFE) 8 Medium Pressure, Type 8C, 0H Hydraulic 9 Medium Pressure, Type 0N 10 High Pressure, Type 50N, N Hydraulic, Gases, Non-conductive 11 High Pressure, Type 590, 57 Hydraulic 1 High Pressure, Type AS10, AS13, Hydraulic, Grease, Gases 13 High Pressure, Type, 040N Hydraulic, Grease, Gases, Spray Paint 14 High Pressure, Type 040H, 370N/H Hydraulic 15 High Pressure, Type 370M, 44N, 45N 16 High Pressure, 714 Spray Paint, Hydraulic, Type 715 Spray Paint, Hydraulic 17 Ultra high Pressure, Type 448N (V91) Umbilical Hose 18 Ultra high Pressure, Type 380N, 380M, 388N Hydraulic 19 Ultra high Pressure, Type X80N, 390N (V91) Hydraulic 0 Ultra high Pressure, Type 440D/N, 640D/N 1 Black Eagle Family + Colorgard TM Golden Eagle Family + Colorgard TM 3 Phalcon + Colorgard TM 4 Water Jetting, Type 40D, 40M 5 Water Jetting, Type 388N Blueline, 0N Blueline 6 Water Jetting, Type 440D/N, 440M 7 Water Jetting, Type 640D/N 8 Water Jetting, Type 740D, 840D 9-33 Chemical table Symbol Key 388N-04V1W 6.3 1/ BS Inside Diameter Out. Dia. Working Pressure Burst Pressure B. adius Weight Available for rental Fluid Control is now a Approved Collaborator for Parker Hannifin. We hold in stock a wide range of thermoplastic hoses, as well as other Parker products. - Flexible Solutions
3 SELECTION OF HOSES Selection Table for Hoses MpA multiplied by 10 = Bar (1 MpA = 10 Bar) Hose Dimension inch 5/64 1/8 5/3 3/16 1/4 5/16 3/8 1/ 5/8 3/4 1 1¼ 1½ mm dash DN Micro Hoses Working Pressure Mpa s 00N Medium-pressure Hoses 8C /// 0H // LT // 0A // High-pressure Hoses 50N / N / 0N N // //H /8/ NO 69 -OF 57C 34,5 34,5 C 040N / 040H / 40N 43 X 45N , / 370N/370H /X/9X Ultra-high-pressure Hoses 44N N 69 X 380N ,5 388N NV91 44,5 41, X X80N / 440D/440N NV * / * 640D/640N Teflon Hoses PTFE/FEP 919U 1 030T T / Paint Spray Hoses , H Water Jetting Hoses 40D TX/AX 380N KX 44N KX 388N BS 0N BL 440D/440N D/640N HX/ 740D HX 840D WX * Ask us about fittings - 3
4 SELECTION OF FITTINGS Selection Table for s 9X NPTF Male 60 Cone 01 X X X X X X X NPTF Female-rigid 0 JIC Male-37 Cone 03 X X X X UNF Male/O-ring 05 X X X JIC-37 Cone 06 X X X X X X X Metric Swivel Strong 90 Elbow O-ring 1C X X X JIC 37 Cone 45 Elbow 37 X X X JIC 37 Cone 90 Elbow 39 X X X X X BSP Male-60 Cone 3B X BSP Swivel 60 Cone 9 X X X X X X X UNF Swivel 59 Cone AY X BSP Swivel 45 Elbow B1 X X X X X BSP Swivel 90 Elbow B X X X X X Metric Swivel Light Cone C3 X X X X X X Metric Swivel Light Cone 45 Elbow C4 X X X X Metric Swivel Light Cone 90 Elbow C5 X X X X Metric Swivel Strong C6 X X X X Metric Swivel Strong O-ring C9 X X X X X Metric Swivel Light O-ring CA X X X X Metric Swivel Light 45 Elbow O-ring CE X X X X Metric Swivel Light 90 Elbow O-ring CF X X X X Metric Male 4 Cone Light D0 X X X X X Metric Male 4 Cone Strong D X X X X BSP Male D9 X X X X X X M16X Swivel (Knurled nut) 8 BSP Swivel 60 Cone UO X X BSP Male- For USIT ing Y9 AE High Pressure 59 Cone UNF-LH YA X Metric Swivel Nut Y AE Medium Pressure 59 Cone UNF-LH Y X AE High Pressure 59 Cone UNF-LH Y4 AE High Pressure 59`Metric cone YM X 01 NPTF Male - 60 Cone 0 NPTF Female - rigid 03 JIC Male - 37 Cone 05 UNF Male / O-ing BL BS X X X X 06 JIC - 37 Cone 37 JIC - 37 Cone 39 JIC - 37 Cone 3B BSP Male - 60 Cone UNF Swivel Nut 9X AX X 45 Elbow UNF Swivel Nut X 90 Elbow UNF Swivel Nut X X 9 Sealing Head (60 ) BSP Swivel Nut BL 9X BS KX X AY 59 Sealing Cone UNF Swivel Nut 69 HX KX X 113 B1 Sealing Head (60 ) BSP Swivel Nut 45 Elbow X B Sealing Head (60 ) BSP Swivel Nut 90 Elbow X C3 Sealing Head Light Metric Swivel Nut X C4 Sealing Head 45 Elbow Light Metric Swivel Nut X C5 Sealing Head 90 Elbow Light Metric Swivel Nut X C6 Sealing Head Heavy Metric Swivel Nut X - 4 Flexible Solutions
5 SELECTION OF FITTINGS X AX TX KX BS BL HX WX X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X C9 4 Sealing Cone / O-ing Heavy Metric Swivel Nut ISO 11-9X BL AX BS X HX CA 4 Sealing Cone / O-ing Light Metric Swivel Nut ISO 11- X CE 4 Sealing Cone / O-ing 45 Elbow Light Metric Swivel Nut ISO 11- X CF 4 Sealing Cone / O-ing 90 Elbow Light Metric Swivel Nut ISO 11- X D0 Light ISO 11- Metric Male 4 Cone X D Heavy ISO 11- Metric Male 4 Cone X D9 DIN 385 Shape A BSP Male X 8 Quick Connect Metric Swivel Nut Knurled X U0 BSP Swivel Nut Sealing Head (60 ) X Y9 BSP Male - for USIT ing X YA High Pressure Connector 59 Cone UNF - Left Hand Thread X Y Quick Connect Metric Swivel Nut X Y Medium Pressure Connector 59 Cone UNF - Left Hand Thread X Y4 High Pressure Connector 59 Cone UNF - Left Hand Thread X HX WX YM High Pressure Connector 59 Metric Cone Metric - Left Hand Thread X HX WX - 5
6 THEMO-PLASTIC HOSES MICO HOSES High-pressure hose for use with petroleum and synthetic hydraulic oils and gases. Special hose for Mini Control pressure measurement equipment (minimess). Supplied with fittings as specified on the next page. Max length change is +% / -4% at working pressure. * Safety factor reduced for diagnostic applications. einforcement: Type 00N Mini Control System Black 1 layer braided synthetic fiber 40 o C to +100 o C for synthetic and oil-based hydraulic oils 00N-01V30.0 5/ N-0V30.9 1/ N-05V / N-01V50.0 5/ * N-0V50.9 1/ * N-05V / * See page 5-19 for fittings Mini control system HOSE COUPLINGS FO USE WITH HOSE type 00N M16x Screw lock coupling A mm d mm d1 mm P.max bar M16x 640 Coupling with pipe socket M14x1, M16x1,5 640 of the couplings are complete with pressure sleeve, and includes sleeve with dust plug M16x screw lock couplings. Pressure gauge coupling /4 BSP / BSP Other sizes, thread types and materials available on request Flexible Solutions
7 THEMO-PLASTIC HOSES PTFE TEFLON HOSES There are currently no known solvents for PTFE. Can be used for steam, acids, alkalis, articles of food, oils and corroding oils and corroding substances. PTFE is highly resistant to natural degradation and aging and does not absorb water. The exceptional low friction resistance minimizes loss of pressure in the hoses. Type 030T is well suited for spray painting. einforcement: 50 o C to +150 o C (+30 o C up to 0 bar) Type 030T PTFE Teflon Hose Stainless steel wire braid (reinforcement) 1 layer stainless steel wire braiding Polytetrafluoroethylene PTFE) 030T-03V / B 030T-04V / B 030T-05V / B 030T-06V / B 030T-08V / B 030T-10V / B 030T-1V / B 030T-16V B Type 033T PTFE Teflon Hose There are currently no known solvents for PTFE. Can be used for steam, acids, alkalis, articles of food, oils and corroding oils and corroding substances. PTFE is highly resistant to natural degradation and aging and does not absorb water. The exceptional low friction resistance minimizes loss of pressure in the hoses. Type 030T is well suited for spray painting. Stainless steel wire braid (reinforcement) einforcement: layers stainless steel wire braiding Polytetrafluoroethylene PTFE) 50 o C to +150 o C (+30 o C up to 0 bar) 033T-04V / T-05V / T-06V / T-08V / T-10V / T-1V / T-16V
8 THEMOPLASTIC HOSES MEDIUM PESSUE Type 8C Non-conductive Hose Specifications Exceed SAE For medium-pressure hydraulic systems with petroleum or synthetic hydraulic oils, where it is required that the hose must not be electrically conductive. Well suited for hydraulic systems at highvoltage installation working platforms. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Special PFX, orange einforcement: 1 layer braided synthetic fiber Polyester Elastomer 40 o C to +100 o C for hydraulic oils 40 o C to +57 o C for synthetic oils and water-based fluids Insulation resistance: SAE J7 (less than 50 μa leakage during 75,000 volts per foot) 8C / C / // 8C / // 8C / // 8C / // 8C / // 8C / / 8C / // 8C // Type 0H, SAE High Performance Medium-pressure systems, also for mobile hydraulics and agriculture machinery. Also available as dual- or multi-hose or Non-Conductive hose. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Black pin-pricked Polyurethane einforcement: layers braided synthetic fiber Hytrel 70 o C to +100 o C for water and water-based oils 40 o C to +100 o C for petroleum and synthetic-based oils and gases 0H / / 0H / / 0H / / 0H / / 0H / / 0H / / 0H / / 0H / - 8 For more information on coupling options and quality of materials, please contact us Flexible Solutions
9 THEMOPLASTIC HOSES MEDIUM PESSUE Type 0N Medium-pressure Hose Specifications Exceed SAE Medium-pressure systems for oil and synthetic hydraulic fluids and certain chemicals. Also suitable for agricultural machines, robotic systems and for use with fire resisting fluids. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Black pin-pricked Polyurethane einforcement: 1 layer braided synthetic fiber 40 o C to +100 o C for oil, water and synthetic hydraulic fluids series 0N / N / / 0N / / 0N / / 0N / / 0N / / 0N / / Also available in twin design and as multiline
10 THEMOPLASTIC HOSES HIGH PESSUE Type 50N Standard Hydraulic Hose Specifications Exceed SAE High-pressure hose for use with oil-based and synthetic hydraulic oils, as well as gases. Low volumetric expansion and small outer diameter due to aramid fiber reinforcement. Also available as dual- or multi-hose. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Black pin-pricked Polyurethane einforcement: 1 layer braided synthetic aramid fiber 40 o C to +100 o C for synthetic and oil-based hydraulic oils 50N / / 50N / / 50N / / 50N / / 50N / / High-pressure hose for use with oil-based and synthetic hydraulic oils, as well as gases. Low volumetric expansion and small outer diameter due to aramid fiber reinforcement. Not electrically conductive according to SAE J7 (less than 50 µa at 75,000 Volts per foot). Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Type N Standard Hydraulic Hose Non-conductive Hose Specifications Exceed SAE Orange Polyurethane einforcement: 1 layer braided synthetic aramid fiber 40 o C to +100 o C for synthetic and oil-based hydraulic oils N / / N / / N / / N / / N / / - 10 Flexible Solutions
11 THEMOPLASTIC HOSES HIGH PESSUE Type 590 Hybrid High Pressure Hose Specifications Exceed SAE 100 High-pressure hose for use with oil-, water- and synthetic-based hydraulic oils. Ideal for applications where small bend radius and excellent aging characteristics are important. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. einforcement: Black Polyurethane 1 layer aramid and 1 layer steel wire braiding Polyester Elastomer 40 o C to +11 o C for oil-based hydraulic oils 40 o C to +57 o C for synthetic and water-based oils / / / / / / / / / / / / / Type 57 High Pressure Hose Low Volumetric Expansion High-pressure hose for use with oil-based and synthetic hydraulic oils. Especially designed for applications where low volumetric expansion and stable pressure is required. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Black special Polyurethane einforcement: 1 or layers braided synthetic aramid fiber 40 o C to +100 o C for synthetic and oil-based hydraulic oils max. 70 o C for water or methanol-based fluids / / / / / / / / / H H
12 THEMOPLASTIC HOSES HIGH PESSUE High-pressure hose for use with oil-based and synthetic hydraulic oils, as well as gases. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Also available in other colors. Type AS10 Standard Hydraulic Hose Specifications Equivalent to SAE Black Polyurethane einforcement: layers braided aramid fiber 40 o C to +100 o C for continuous use AS / AS10 AS / AS10 AS / AS10 AS / AS10 AS / AS10 AS / AS10 AS AS10 Type AS13 Standard Hydraulic Hose Specifications Exceed SAE High-pressure hose for use with oil-based and synthetic hydraulic oils, as well as gases. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Also available with orange non-electrically conductive covering. Black pin-pricked Polyurethane einforcement: layers braided polyester fiber Hytrel 40 o C to +95 o C for continuous use AS / ASC13 AS / ASC13 AS / ASC13 AS / ASC13 AS / ASC13 AS / ASC13 AS ASC13-1 For more information on coupling options and quality of materials, please contact us Flexible Solutions
13 THEMOPLASTIC HOSES HIGH PESSUE High-pressure hose for hydraulic, pneumatic and lubrication oils - such as high-pressure tools, test equipment, offshore pressure control equipment and offshore oil applications. 8 is not electrically conductive. einforcement: Type High-pressure Hose =Blue, H=Orange, 1 layer braided aramid 40 o C to +100 o C, max 70 o C for water and methanol-based fluids / / H / / / / High-pressure hose for hydraulic systems with petroleum, synthetic or water based hydraulic oils. Also ideal for grease, gases and paint spraying. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Type 040N Multi-use Hose Specifications DIN 0 0 Part 1 DNV Approved Black Polyurethane einforcement: 1 layer steel wire braiding 40 o C to +100 o C for synthetic- and oil-based hydraulic oils Available in other colors 040N-0V / N-03V / / 040N-04V / / 040N-05V / / 040N-06V / / 040N-08V / / 040N-10V / N-1V / N-16V
14 THEMOPLASTIC HOSES HIGH PESSUE High-pressure hose for hydraulic systems with synthetic-, water- or petroleum-based hydraulic oils. Good flexibility due to the special construction method. Ideal for lifting equipment, machines and applications requiring high durability. Also available as dual- or multi-hose. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Type 040H Standard Hydraulic Hose Specifications DIN 0 0 Part 1 DNV Approved Black Polyurethane einforcement: 1 layer steel wire braiding Polyester Elastomer 40 o C to +100 o C for oil-based hydraulic oils 40 o C to +57 o C for synthetic- and water-based oils 040H-03V / / 040H-04V / / 040H-05V / / 040H-06V / / 040H-08V / / 040H-10V / H-1V / H-16V High-pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils and gases and aggressive media. Ideal for hydraulic and rescue tools. For CNG use, the hose is only sold pre-assembled with fittings including kink guards. Also available as dual- or multi-hose. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Type 370N/H Universal High Pressure Hose Specifications Exceed DIN 0 0 Part TÜV/CGA/AGA Approved for CNG einforcement: Internal H: Internal N: Black Polyurethane layers steel wire spiral and layers braided synthetic fiber Polyester Elastomer 40 o C to +100 o C for oil-based hydraulic oils (to +10 o C for shorter periods) V71 has PA11 inside. For paint spraying, use fittings series 370N-04V / X 370N-05V / X 370N-06V / X 370N-08V / X 370N-06V / X 370H-08V / X - 14 Flexible Solutions
15 THEMOPLASTIC HOSES HIGH PESSUE - CHEMJEC Withstands high pressure cycles with no signs of stress cracking. Proven to handle methanol. High collapse resistance (HC) and also providing longer service life. Extremely low permeability. Medium pressure, high temperature, low volumetric expansion hose. Long length subsea umbilical hose. Excellent chemical resistance. Available in long continous length up to,500 m. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Type 370M (V30) Universal High Pressure Hose Polyflex Hose - ChemJec Specifications Exceed ISO einforcement: -40 C up to 15 C -40 F up to 57 F Black PA1 High strength wire, synthetic fibre Coextruded core tube with fluoropolymer inside 370M-06V / X Type 44N/45N High-pressure Hose Specifications Exceed SAE 100 9/10 High-pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils, spray painting, gases and aggressive media. Ideal for hydraulic and rescue tools. 3/4 and 1 hoses are DNV type-approved. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Black Polyurethane (Polyurethane from 5/8 ) einforcement: layers steel wire spiral and 1 layer steel wire braiding 40 o C to +100 o C for oil-based hydraulic oils (to +15 o C for shorter periods) 44N-06V / N-08V / N-0V / N-04V / N-05V / N-06V / N-08V / N-10V / N-1V / N-16V
16 THEMOPLASTIC HOSES HIGH PESSUE Type 714 is a special hose for high-pressure spray paint designed to meet the market demands. The steel wire braiding makes the hose 100% electrically conductive. Inner tube specially designed for chlorinated solvents. The polyurethane covering provides excellent flexibility and durability. Also excellent for use as a hydraulic hose. Type 714 Spray Paint Hose Blue Polyurethane einforcement: 1 layer steel wire braiding 40 o C to +100 o C for synthetic- and oil-based hydraulic oils / / / / Type 715 Spray Paint Hose Type 715 is a special hose for high-pressure spray paint designed to meet the market demands. The steel wire braiding makes the hose 100% electrically conductive. Inner tube specially designed for chlorinated solvents. The polyurethane covering provides excellent flexibility and durability. Also excellent for use as a hydraulic hose. einforcement: Blue Polyurethane layers steel wire braiding 40 o C to +100 o C for synthetic- and oil-based hydraulic oils / H / H / H - 16 Flexible Solutions
17 THEMOPLASTIC HOSES ULTA-HIGH PESSUE Type 448N (V91) Umbilical hose Available in long lengths for use in subsea umbilicals. einforcement: Black PA1 4 layers steel wire spiral Methanol washed PA11 40 o C to +100 o C +70 o C for water- or methanol-based fluids 448N-04V / N-06V / * * For coupling type, please contact us For machines and tools, see group 19 For more information on coupling options and quality of materials, please contact us
18 THEMOPLASTIC HOSES ULTA-HIGH PESSUE - CHEMJEC Type 380N Specifications Exceed SAE 10 High-pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils. Ideal for hydraulic and rescue tools. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. einforcement: Black Polyurethane (other colors on request) layers steel wire spiral and layers steel wire braid. V91 has methanol-washed PA11 40 o C to +100 o C for oil-based hydraulic oils, V91 also for methanolbased fluids 380N-04V / N-04V / / 380N-05V / Also available in twin design Type 380M - Polyflex Hose - ChemJec Specifications Exceed ISO Withstands high pressure cycles with no signs of stress cracking. Proven to handle methanol. High collapse resistance (HC) and also providing longer service life. Extremely low permeability. High pressure, high temperature, low volumetric expansion hose. Long length subsea umbilical hose. Excellent chemical resistance. Available in long continuos length up to 3,000 m. Black PA1 einforcement: High strength wire Coextruded core tube with fl uoropolymer inside -40 C up to +100 C, short term 15 C 380M-04V / / 380M-05V / * Also available in twin design *Consult factory Type 388N Specifications Exceed SAE 10 High-pressure hydraulic systems for petroleum and synthetic based hydraulic oils. Ideal for hydraulic and rescue tools. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Black Polyurethane (other colors on request) einforcement: layers steel wire spiral and layer steel wire braid 40 o C to +100 o C for oil-based hydraulic oils 388N-04V / For more information on coupling options and quality of materials, please contact us Flexible Solutions
19 THEMOPLASTIC HOSES ULTA-HIGH PESSUE Type X80N High-pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils. Ideal for hydraulic and rescue tools. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. einforcement: Black Polyurethane Steel wire and aramid combination 40 o C to +100 o C for oil-based hydraulic oils X80N-04V / X80N-06V / X80N-1V / Type 390N (V91) High-pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils. Ideal for hydraulic and rescue tools. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. einforcement: Black Polyurethane Steel wire and aramid combination PA11 40 o C to +100 o C for oil-based hydraulic oils 390N-06V / X 390N-08V / X 390N-1V / X 390N-16V X 390N-06V91-10K 9.5 3/ X For more information on coupling options and quality of materials, please contact us
20 THEMOPLASTIC HOSES ULTA-HIGH PESSUE Type 440D/440N Ultra-high-pressure Hose For use with petroleum or synthetic hydraulic fluids, gases and chemicals. Well suited for hydraulic prestress tools, test rigs and offshore oil applications. The hose is marked with manufacturer, type of hose, working pressure and production date. Also available as pin-prickled - add -P after. Also available in a methanol-washed version - V91. einforcement: Temperature range 40oC to +70 o C 440D Blue 440N Black 4 layers steel wire spiral 440D Polyoxymethylene 440N 440D-05V / D-03V / D-04V / D-05V / N-06V / N-08V / N-1V / N-16V Type 640D/640N Ultra-high-pressure Hose For use with petroleum or synthetic hydraulic fluids and chemicals. Well suited for hydraulic prestress tools, test rigs and offshore oil applications. The hose is marked with manufacturer, type of hose, working pressure and production date. Blue einforcement: 6 layers steel wire spiral 640D Polyoxymethylene 640N 40 o C to +70 o C 640D-05V / D-03V / D-05V / N-08V / N-1V / For water jetting - see page -5 Flexible Solutions
21 BLACK EAGLE COLOGAD POLYFL HOSE BLACK EAGLE FAMILY + COLOGAD Type 640N / 0N Main Features COLOGAD, dual colour safety feature with extra thick cover for superior abrasion resistance. Plyamide-11 core tube for cleanliness Weight up to 7.5 kg/m Smaller OD than flexible pipe allows more hose per reel Excellent chemical resistance providing long service life in sea water Flexible, lightweight, chemical resistant alternative to steel or flexible pipe. Used for high volume pumping in well service applications such as cementing chemical injection and other onshore and subsea well stimulation operations. Available in long continuous lengths (500m to,000m depending on size). Core tube: Pressure reinforcement: Cover: Colour: PA11 High strength wire Extra thick polyurethane cover ColorGard TM Safety feature (red inner, black outer cover) -40 o C up to +70 o C -40 o F up to +1 o F 640N-16V * 15000* HX 640N-4V / * 10000* N-3V80** * 10000* BL 640N-48V * 10000* Notes: *Maximum working pressure with safety factor less than 4:1 ** 0N-3V80 is a replacement for 640N-3V
22 GOLDEN EAGLE COLOGAD POLYFL HOSE GOLDEN EAGLE FAMILY + COLOGAD Type 640M / 0M / 448M Main Features COLOGAD, dual colour safety feature with extra thick cover for superior abrasion resistance. Fluorpolymer based. Weight up to 9. kg/m Smaller OD than flexible pipe allows more hose per reel Excellent chemical resistance providing long service life in sea water Flexible, lightweight, chemical resistant alternative to steel or flexible pipe. Used for high volume pumping in well service applications with acid fluids and chemical injection and other onshore and subsea well stimulation operations. Available in long continuous lengths (500m to,000m depending on size). GOLDEN EAGL COLOGAD Core tube: Pressure reinforcement: Cover: Colour: Fluorpolymer based High strength wire Extra thick Polyurethane ColorGard TM Safety feature (red inner, black outer cover) -40 o C up to +100 o C, short term 15 o C -40 o F up to +1 o F, short term 57 o F 640M-16V * 10000* HX 640M-4V60** / * 10000* M-4V / * M-3V * 5000* BL 448M-3V * 5000* BL 0M-3V * 10000* BL 0M-3V * 10000* BL Notes: *Maximum working pressure with safety factor less than 4:1 ** V60: black PVDF cover - Flexible Solutions
23 PHALCON COLOGAD POLYFL HOSE PHALCON+ COLOGAD Type 440N / 448N E Main Features COLOGAD, dual colour safety feature with extra thick cover for superior abrasion resistance. Fluorpolymer- core tube for cleanliness. Weight up to 7 kg/m Smaller OD than flexible pipe allows more hose per reel Excellent chemical resistance providing long service life in sea water Used for high volume pumping in well service applications such as chemical injection and other onshore and subsea well stimulation operations. Available in long continuous lengths. Core tube: Pressure reinforcement: Cover: Colour: PA11 High strength wire Extra thick Polyurethane cover ColorGard TM Safety feature (red inner, black outer cover) -40 o C up to +70 o C -40 o F up to +159 o F 440N-16V * 440N-4V / * 448N-3V BL Notes: *Consult factory - 3
24 THEMOPLASTIC HOSES CHEMJEC Type 40D Ultra-high-pressure Hose For Pipe-cleaning Ultra-high-pressure hose for cleaning of pipes, heat exchangers, etc. in the chemical and oil industries. The hose can be used as a flexible lance with pressure over 750 bar. The hose is available as a special hose with stainless steel wicker work for added external protection. The hose is marked with manufacturer, type of hose, working pressure and production date. einforcement: 10 o C to +70 o C for water Blue layers steel wire spiral Polyoxymethylene 40D-0V / TX/AX 40D-05V / TX/AX 40D-03V / TX/AX 40D-04V / TX/AX 40D-05V / TX/AX Type 40M Ultra-high-pressure Hose Polyflex Hose - ChemJec Withstands high pressure cycles with no signs of stress cracking. Proven to handle methanol. High collapse resistance (HC) and also providing longer service life. Extremely low permeability. Meets or exceeds the performance requirements of ISO Medium pressure, high temperature, low volumetric expansion hose. Excellent chemical resistance. Long length subsea umbilical hose. Available in long continous length up to 3,000 m. einforcement: -40 C up to +100 C, short term 15 C -40 F up to +1 F, short term 57 F Black PA1 High strength wire Coextruded core tube with fl uoropolymer inside 40M-04V / X - 4 Flexible Solutions
25 THEMOPLASTIC HOSES WATE JETTING HOSES Type 388N Ultra-high-pressure Hose Blueline Water Jetting Hose Ultra-high-pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. Blue Polyurethane, AL 5001 einforcement: layers steel wire spiral and open layers steel wire spiral 40 o C to +70 o C for water 388N-04V1W 6.3 1/ BS 388N-08V1W 1.7 1/ BS Type 0N Ultra-high-pressure Hose Blueline Water Jetting Hose Ultra-high-pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. einforcement: 40 o C to +70 o C for water Blue Polyurethane 4 layers steel wire spiral and open layers steel wire spiral 0N-06V / BL 0N-08V / BL 0N-1V / BL - 5
26 THEMOPLASTIC HOSES WATE JETTING HOSES - CHEMJEC Type 440D/440N Ultra-high-pressure Hose Water Jetting Hose Ultra-high-pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. einforcement: 40 o C to +70 o C for water, V3=Blue, V30=Black 4 layers steel wire spiral 440D Polyoxymethylene 440N 440D-05V / D-03V / D-04V / D-05V / N-06V / N-08V / N-1V / N-16V Type 440M Ultra-high-pressure Hose Polyflex Hose - ChemJec Withstands high pressure cycles with no signs of stress cracking. Proven to handle methanol. High collapse resistance (HC) and also providing longer service life. Extremely low permeability. Meets or exceeds the performance requirements of ISO High pressure, high temperature, low volumetric expansion hose. Long length subsea umbilical hose. Excellent chemical resistance. Available in long continuos length up to 3,000 m. einforcement: -40 C up to +100 C, short term 15 C -40 F up to +1 F, short term 57 F Black PA1 High strength wire Coextruded core tube with fl uoropolymer inside *Product under development 440M-04V / M-05V / M-06V / M-08V / M-1V / M-16V30* Flexible Solutions
27 THEMOPLASTIC HOSES WATE JETTING HOSES Type 640D/640N Ultra-high-pressure Hose Water Jetting Hose Ultra-high-pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. einforcement: 40 o C to +70 o C for water Blue 6 layers steel wire spiral 640D Polyoxymethylene 640N 640D-05V / HX/ 640D-03V / HX/ 640D-05V / HX/ 640N-08V / HX/ 640N-1V / HX/ 640N-16V HX/ - 7
28 THEMOPLASTIC HOSES WATE JETTING HOSES Type 740D Ultra-high-pressure Hose Water Jetting Hose Ultra-high-pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. einforcement: 40 o C to +70 o C for water ed or yellow 6 layers steel wire spiral Polyoxymethylene 740D-05V / HX 740D-03V / HX 740D-05V / HX 740D-08V / HX Type 840D Ultra-high-pressure Hose Water Jetting Hose Ultra-high-pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. Can replace the steel pipes where flexibility is required. The hose is marked with manufacturer, type of hose, working pressure and production date. ed einforcement: 8 layers steel wire spiral Polyoxymethylene 40 o C to +70 o C for water 840D-03V / WX 840D-05V / WX 840D-08V / WX - 8 Flexible Solutions
29 CHEMICAL TLE THEMOPLASTIC HOSES atings Code G -Good to excellent. Little or no swelling, tensile or surface changes. Preferred choice. L -Marginal or conditional. Noticeable effects but not necessarily indicating lack of safety. Further testing suggested for specific application. P -Poor or unsatisfactory. Not recommended without extensive and realistic testing. -Indicates that this was not tested. Material Code for Hose Core Tubes polyflex / Parflex Part Numbers H N PV NC TFE POM Polyester elastomer Polyvinylchloride (PVC) Nylon co polymer Polytetrafluorethylene (PTFE) Polyoxymethylene Material Code for Hose Covers 040H, 370H, 5H, 8B, 8C, 0H, 8H, LT, 0, 590, 593, 10LT 010N, 00N, X0N, 040N, 44N, 45N, 370N, 440N, 380N, 640N, 50N, 0N, 573X, 573XL, 57, 0N, 8N,, 8 GPH 0A, 5A 030T, 033T, 919, 99, 939/939B, 919U 440D, 640D U Polyurethane 010N, 040N, 040H, 44N, 45N, 370H, 370N, 380N, 0, 830, 838, 5A, 5H, 0A, 8B, 0N, 0H, 8H 0, 50N, 0N, 8N, 590, 593,, 8, 919U HF Special elastomer LT, 10LT PV Polyvinylchloride (PVC) GPH H Polyester elastomer 040N PFX Special elastomer 8C N 010N, 00N, X0N, 440D, 440N, 640D45N, 44N Material Code for Sealing Components V FKM O-rings Notes on the Chemical esistance Table (1) The fluid resistance tables are simplified rating tabulations based on immersion tests at 4 C. Higher temperatures tend to reduce ratings. Since final selection depends on pressure, fluid and ambient temperature and other factors not known to Parker Hannifin, no performance guarantee is expressed or implied. The indications do not imply any compliance with standards and regulations and do not refer to possible changes of colour, taste or smell. For food and drinking water specially approved materials have to be used. For fluids not listed or for advice on particular applications, please consult Parker Hannifin GmbH, Polyflex Division in Hüttenfeld, Germany. () Hose applications for these fluids must take into account legal and insurance regulations. The chemical resistance indicated does not express or imply approval by certain institutions. (3) Satisfactory at some concentrations and temperatures, unsatisfactory at others. (4) For gas applications, the cover should be pin-pricked and the pressure must not be released quickly. Special safety guard accessories are to be used to prevent damage or personal injury in the event of failure. (5) Chemical resistance does not imply low permeation rates. Please consult Parker Hannifin for a recommendation for your specific requirements (6)The indication of chemical resistance does not imply any special food compatibility; it refers only to the chemical resistance of the material. (7)Chemical resistance does not imply acceptability for use in airless paintspray applications. These applications require a special, electrically conductive hose
30 CHEMICAL TLE THEMOPLASTIC HOSES - 30 Flexible Solutions
31 CHEMICAL TLE THEMOPLASTIC HOSES
32 CHEMICAL TLE THEMOPLASTIC HOSES - 3 Flexible Solutions
33 CHEMICAL TLE THEMOPLASTIC HOSES
34 NOTES - 34 Flexible Solutions
Group 2 Thermo-plastic Hoses Teflon Hoses Water Jetting Hoses
Group Thermo-plastic Hoses Teflon Hoses Water Jetting Hoses IND Page Contents 3-6 Selection Tables for Hoses and Fittings 7 Micro Hoses, 00N, Mini Control System 8 Teflon Hoses (PTFE), 030T, 033T 9 High
More informationLow-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements
Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant
More informationHOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR)
HOSES & LANCES Jetstream provides a full arrangement of hoses and flex lances for high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 15,000 psi application.
More informationThermoplastic Hose Quick Reference Guide
Thermoplastic Hose Quick Reference Guide 4703 4700 SAE 100R3 SAE 100R7 Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System Pilot Lines and Joystick Controls General Hydraulics
More informationThermoplastic Hoses. Polyflex/Parflex. Polyflex Presto
Thermoplastic Hoses Motors Valves Actuators Accumulators Filtration Polyflex/Parflex Thermoplastic Hoses for Hydraulic Applications Polyflex Presto Tubing for Pneumatics For pressures up to 700 bar. Single
More informationSingle Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover
SECTION 1 SAE100R1 Page 6 SAE100R2 Page 6 SAE100R2XP Page 7 SAE100R2GP Page 7 Quick Reference Taipan Hose Single Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover SAE100R2H
More information05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
More information83FR - DuraGard General Purpose Urethane 300 PSI
Hydraulic & Fit. Coiled Air, 83FR - DuraGard General Purpose 300 PSI HJK - Highjack Jackline Hybrid 10,000 PSI PARFLEX 83FR PARFLEX HJK Push- Lok * re pg 83FR-4 1/4 6.47 12 300 2.1 1.0 25.4.05.07 HY*/55
More informationHIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors)
HIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors) HIGH PRESSURE THERMOPLASTIC HOSES As the specialist in the manufacturing of high pressure hoses, we are poised to achieve exceptional
More informationTOOLFLEX HTMA PRODUCTS CATALOG. 901 E Jefferson St. Bensenville, Illinois Phone: Fax:
TOOLFLEX 901 E Jefferson St. Bensenville, Illinois 60106 Phone: Fax: 847-455-4559 HTMA PRODUCTS CATALOG TOOLFLEX LOW TWIN NON-CONDUCTIVE HOSE ASSEMBLIES This hose is designed for hydraulic tool applications
More informationQUALITY HYDRAULIC PRODUCTS
QUALITY HYDRAULIC PRODUCTS N.R.P. ISO9001 Certified Quality System NRP- JONES Has What it Takes to Build Your Business! Over a half-century of experience helps you build customer satisfaction while increasing
More informationHose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 382 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
More informationHose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 392 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
More informationHydraulic & Pneumatic Hoses
s & Table of Contents Description Page Hydraulic Tutorial and... 3-5 Selection Guide... 6 Rated s PSI...7 Assembly & Nomenclature...8 B9 General Purpose Fuel Transfer...9 D6 Constant Hybrid 3000 PSI...9
More information2380N High pressure hose. Design Factor >2:1. CONSTRUCTION Core tube : Polyamide. Hoses with design factor >2:1 2380N
C 2380N 2380N High pressure hose CONSTRUCTION Core tube : Polyamide Pressure reinforcement : Two spiral layers and two open spiral layers of high tensile steel wire Cover : Polyurethane Standard colour
More informationSynflex Hose and Fittings. Master Catalog
Synflex Hose and Fittings Master Catalog Table of Contents Hose Selection Chart (by application/product)...3 Hydraulic Pressure Hose Selection Chart...5 Low and Medium Pressure Hose...7-10 3R30 Low Pressure...7
More information1. Hydraulic Hose. 2. Pneumatic Tubing. 3. Gas Transfer Hose. 4. Air and Water Transfer Hose. 5. Specialty Hose and Tubing. 6.
1. Hydraulic Hose 2. Pneumatic Tubing 3. Gas Transfer Hose 4. Air and Water Transfer Hose 5. Specialty Hose and Tubing 6. Truck Products 7. Hose Couplings and Accessories 8. Technical and Design Information
More informationMicrobore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
More informationWelcome to JDM Industrial Maintenance Inc.
Welcome to JDM Industrial Maintenance Inc. We are an experienced and innovative company which has been serving the City of Peterborough and the surrounding areas since 98. Our diverse skills and resources
More informationComposite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
More informationJ-FLEX HYDRAULIC HOSE SOLUTIONS
Your Hose & Fitting Connection J-FLEX HYDRAULIC HOSE SOLUTIONS ww.jgbhose.com JGB Headquarters 115 Metropolitan Dr. Liverpool, NY 13088 (315) 451-2770 Buffalo Branch 2540 Walden Ave. Cheektowaga, NY 14225
More informationHOSE & HOSE PROTECTION
ALL YOU CAN EXPECT AND MORE Think about Hydraulics Differently Quality European Hose SECTION A HOSE INDEX 1 Hydraulic Hose HOSE & HOSE PROTECTION 1SN - SAE R1 AT - 1 Wire Thin Cover Hose 1SN - 1 Wire Thin
More informationGS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS
GS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS General Information GS-Hydro supplies a comprehensive selection of hoses and hose couplings which includes BSP, NPT, JIC, Metric, SAE 3000/6000 Flanges and
More informationTube cleaning. Chapter C. Hose 2240D High pressure tube cleaning hose... C-2
C Table of contents Chapter C Hose 2240D High pressure tube cleaning hose... C-2 Related fittings 106TX JIC female swivel... C-3 1YTX Type M female swivel... C-3 1C9X Metric female swivel heavy series
More informationINDUSTRIAL HOSES 1
INDUSTRIAL HOSES 1 WATER HOSES LONG-SU 6 BAR Gardening and general water discharge services. Temperature range: -25 C / +70 C. Tube: NBR/SBR / Natural and synthetic rubber. Cover: SBR, weather and abrasion
More informationHydraulic Hose. Braided - Multi-spiral - Powerwash - Thermoplastic - PTFE Ranges from 3/16 to 2
Hydraulic Hose Braided - Multi-spiral - Powerwash - Thermoplastic - PTFE Ranges from 3/16 to 2 HYDRAULIC HOSE 1SN Reinforcement: Onehigh tensile steel wire braid Cover: Abrasion, ozone & weather resistant
More informationINOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
More informationAssembly and Supply of:
CATALOGUE Inflex Hydraulic Engines & Machinery Spare Parts Trdg llc P.O.Box 392755, Dubai - UAE, Tel: 04 3394677, Fax: 04 3394388 Email: info@inflexhydraulics.com, www.inflexhydraulics.com www.stainlesssteelhosesdubai.com
More informationGroup 10. PVC - PU Hoses
Group PVC - Hoses INDEX AND SYMBOL KEY Symbol Key for Hose Tables Available hose lengths from the factory Hose minimum bend radius Hose maximum vacuum limit Hose temperature range Hose min. burst pressure
More informationConnection 1 Connection 2 ft m in mm psi bar in mm
RUBBER WATERBLAST HOSES These high pressure hose assemblies combine rugged construction, dependability, and safe performance at an economical price.. Constructed with four spiral layers of high tensile
More informationHose, Hose couplings & Adaptors B-HO-10E
, couplings & Adaptors B-O-0E Features of Nitta thermoplastic hoses Clean and Eco-friendly Smooth inner surface of the plastic hoses keeps the operating oil clean. Piping on Site With the one-touch coupling
More informationDN crimping diameter (guide values) [mm] 2 7,0 4 9,9
ØD hose hose PN pricked* ød part no. 2 400 bar yes 5 9-946-02-00-012 2 630 bar - 5 9-946-02-00-020 2 630 bar yes 5 9-946-02-01-020 4 550 bar yes 8 9-946-04-00-010 *for inert gases technical data of the
More informationFive Hoses. Two Fittings. One Solution. GLOBALCORE The world s first high-performance, cohesive hose and fitting system.
Five Hoses. Two Fittings. One Solution. GLOBALCORE The world s first high-performance, cohesive hose and fitting system. Five Hoses. Two Fittings. One Solution... Providing a simple solution of robust
More informationHydraulic Twin Tough 711 A TC A ST A TC A-14. 4,000 psi Constant W.P. 772TC A ST A A TC A-16
Constant Hydraulic Industry Standard Suction and Return Push-Lok Phosphate Ester Low Temperature Transportation lternative/marine Fuel Refrigerant Hose Hose visual index Constant Hose 451TC -10 451ST -10
More informationWILLBRANDT Rubber Expansion Joint Type 50
WILLBRANDT Rubber Expansion Joint Type DN DN 00 Type is a lowcorrugated, highly elastic rubber expansion joint. Its low corrugation helps to achieve very low flow resistance. It reduces up to % of the
More informationUniflex is the first in India to manufacture hose assemblies using pallet swage fittings.
Universal Flexibles Pvt. Ltd. is involved in the manufacture of top of the line quality Hydraulic Assemblies having commenced operations at Bangalore in 1987. Tradition of excellence Uniflex is the first
More informationDelivering powerful solutions.
Eaton Industrial Hose Master Catalog North America Delivering powerful solutions. Eaton Industrial Hose Products Table of Contents Section Pages Introduction A-2 A-12 Air and Multipurpose High B-5 B-8
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationCONSTRUCTION TUBE Oil resistant synthetic rubber. REINFORCEMENT One high tensile steel wire braid
RUBBER HOSES R1 (MEETS / EXCEEDS THE REQUIREMENTS OF EN 853, ISO 1436 & SAE 100R1AT) CONSTRUCTION TUBE Oil resistant synthetic rubber REINFORCEMENT One high tensile steel wire braid COVER Abrasion, ozone
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationstainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
More informationFlexibility and strength
polyurethane and Flexibility and strength : Polyester Polyurethane or Polyamide PA12 Supply of air to pneumatic components Flexible and long lasting Excellent memory: returns to original shape Pressure
More information33.0 MPa (4800 PSI) 3/8 (9.5 mm) ISO SC R16
CM2T iso 11237 2sc r16 CM2T06 MegaFlex 33.0 MPa (4800 PSI) 3/8 (9.5 mm) ISO 11237 2SC R16-4 6 1/4 0.55 14.1 5800 40.0 23200 160.0 50 31 cm2t04-5 8 5/16 0.61 15.5 5000 35.0 20000 140.0 55 35 cm2t05-6 10
More informationHYDRAULIC HOSES. FlexIT 018
HYDRAULIC HOSES FlexIT 018 HYDRAULIC HOSES Flexit 018 Intertraco (Italia) S.p.A. Flexible Hoses Catalogue - GSIHFX180 - March 2018 The data reported in this catalogue are not binding. Intertraco (Italia)
More informationHYDRAULIC HOSES. Europe 018
HYDRAULIC HOSES Europe 018 HYDRAULIC HOSES Europe 018 Intertraco (Italia) S.p.A. Flexible Hoses Catalogue Europe 018 - GSIHEU180 - March 2018 The data reported in this catalogue are not binding. Intertraco
More informationTubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing...............................FIT-7-2 Metric Industrial Tubing.............................FIT-7-3 Inch D.O.T. Tubing.................................FIT-7-3
More informationWATER CLEANING & BLASTING. ver_0001_05
WATER CLEANING & 1-1 www.manuli-hydraulics.com WATER INTRODUCTION The water cleaning hose range offered by Manuli can be applied to both hobby and professional water cleaning machines with both hot and
More informationHD 1050 DE. Maximum performance. Optimum ease of use. Maximum independence. Outstanding mobility
HD 1050 DE Independently usable high-pressure cleaner with electric start and a hard-wearing high-powered Yanmar diesel engine. Easy to transport due to large wheels with air tyres, favourable weight and
More informationCable Glands & Accessories
Cable Glands & Accessories This catalog features ITC s extensive range of liquid-tight, strain relief cord connectors (cable glands) and accessories, including locknuts, sealing washers, plugs, etc. These
More informationHEBEI QIANLI RUBBER PRODUCTS CO., LTD. HIGH PRESSURE RUBBER HOSE
HEBEI QIANLI RUBBER PRODUCTS CO., LTD. HIGH PRESSURE RUBBER HOSE About the company Customer oriented supplier HEBEI QIANLI RUBBER PRODUCTS CO., LTD. is a technical company, which focus on researching,
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationHydraulic Hoses, Fittings and Equipment
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic s, Fittings and Equipment s and Fittings The perfect range
More informationProducts & Accessories
Products & Accessories CONJET AB P.O. BOX 507 SE-136 25 HANINGE SWEDEN PHONE +46 (0)8 556 522 40 FAX +46 (0)8 556 522 60 E-MAIL conjet@conjet.com WEBSITE www.conjet.com APPLIED WATERJET TECHNOLOGY Index
More informationEQUIPMENT & ACCESSORIES
0011 O-RING BOSS REPLACEMENT RINGS 00026 BSP O-RINGS FOR RECESSED PORT ADAPTERS Part Number O-Ring ID Wall Dia 0011-02 0.239" 0064" 0011-03 0.301" 0064" 0011-04 0.351" 0072" 0011-05 0.414" 0072" 0011-06
More informationHEBEI QIANLI RUBBER PRODUCTS CO., LTD. AIR HOSE. Air hose for air tools or compressor equipment. Technical Data
AIR HOSE Air hose for air tools or compressor equipment Technical Data Company Profile is a technical company, which focus on researching, developing, manufacturing and exporting rubber hose and related
More informationCentrifugal pumps. made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies
Vertical and horizontal centrifugal pumps www.jesspumpen.com Centrifugal pumps made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies Vertical centrifugal pumps of the
More informationMessing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
More informationP R O D U C T G U I D E
PRODUCT GUIDE HYDROPRESS company provides complete solutions for hydraulic industry from 20 years in Poland. Our philosophy is clear - to be the most complete supplier of high quality hydraulic components
More informationThermoplastic Tubing. Catalogue 5210/UK
Thermoplastic Tubing Catalogue 5210/UK Index Table of contents presto polyurethane tubes - Single tubes...o 3 presto polyurethane tubes - Twin-line tubes...o 4 presto polyamide tubes - Single tubes...o
More informationToppTube PA11 (Polyamide) page 4. ToppTube PA12 (Polyamide) page 5. ToppTube PA12HIPHL (Polyamide) page 6. ToppTube PUR 98A (Polyurethane) page 7
ToppTube PA11 (Polyamide) page 4 ToppTube PA12 (Polyamide) page 5 ToppTube PA12HIPHL (Polyamide) page 6 ToppTube PUR 98A (Polyurethane) page 7 ToppTube PE-LD (Polyethylene) page 8 ToppTube PE-LLD (Polyethylene)
More informationconnection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
More information3 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO
Flow Control Valves NPTF NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO Swivel Design: Meter-Out, Meter-In
More informationFLOW CONTROL VALVES & ACCESSORIES
TECHNICAL SPECIFICATIONS construction Valve group Materials Mounting Ports Position Operating temperature PNEUMATIC DATA Operating pressure Nominal pressure nominal flow needle-type Meter In, Meter Out,
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationINTRODUCTION OF KOMAN
H Y D R A U L I C INTRODUCTION OF KOMAN KOMAN HYDRAULIC 02 03 시대는변해도, 기업환경은달라도 NO.1 비즈니스파트너, Koman 입니다 코만은 1981년회사설립이래, 오랫동안축척된기술과신뢰를바탕으로, 정밀한품질관리체제에서유압용호스및호스피팅과어댑터를 SAE, DIN, JIC 및 JIS 등의국제규격을통해생산하고있으며,
More informationAir Brake Tubing and Coils
6 Air Brake Tubing and Coils Content - Section 6 Eurocoils Unicoils Air Coils Compact Coils Truck Coils Euroboom Rubber Air Hose Components Trace Nylon Imperial Nylon Metric Nylon 6.1 Air Brake Tubing
More informationLF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
More informationQuick Coupling Products Distribution. Catalogue 3800-DS/UK
Quick Coupling Products Distribution Catalogue 38-DS/UK For your safety! Under certain circumstances, quick couplings can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks.
More informationLF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
More informationquality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
More information4 Product group CPSS 3000 NON CONDUCTIVE PILOT FL... Pinpricked covers are available from 70 MICRO BORE OFF SHORE MASTER...
Product group 1SB - STEEL BAID ANTIABASION........................................... 83 1SB - STEEL BAID ANTIABASION TWIN...................................... 101 1SB - STEEL BAID MAINE................................................
More informationAnti-Backlash Life. Without Kerkote TFE Coating inch / (cm) 5 to 10 million (12 to 25 million) With Kerkote TFE
Lead Screw and Nut ssemblies NTG Nut Series ompact size, zero backlash, minimal drag torque. The adjustable NTG Series offers a cost effective anti-backlash assembly for applications requiring precise
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationFittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
More informationFlexmaster Joints. MatchMate Plus. Textile braid Wire inserted suction Special application. 40, 43, Convoluted PTFE Engine and air brake
INDEX Section Pages Hose Section 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Pages Section Pages Swivel Joints 229-244 Quick Disconnect Couplings 268-345 Flexmaster Joints 245-260 Access.,
More informationRail Hoses. The Hose Range for European Rail Transportation
Rail Hoses The Hose Range for European Rail Transportation INNOVATION AND COMPLIANCE Parker is a certified and well-experienced partner with a global presence for the leading players of the rail industry.
More informationPF Series Thermoplastic Non-Spill Couplings and Industrial Hose Products
PF Series Thermoplastic Non-Spill Couplings and for Bulk Chemical and Fluid Transfer Bulletin 3800-PF August, 2004 PF Series Non-Spill Quick Couplings Parker PF Series non-spill couplings virtually eliminate
More informationProducts & Information
Dayco Style DR6 Hydraulic Hose Meets SAE 100R6 - page 1. Designed for use as a low pressure hydraulic line, flexible fuel line, power steering return line, and lubrication line. Dayco s Style DR6 Hydraulic
More informationHEBEI QIANLI RUBBER PRODUCTS CO., LTD. QIANLI. Catalog
HEBEI RUBBER PRODUCTS CO., LTD. Catalog QIAN LI Company Introduction HEBEI RUBBER PRODUCTS CO., LTD. is a technical company specializing in producing rubber hoses and related rubber products, sited in
More informationHD 1050 De Cage. Compact cage frame. Outstanding mobility. Maximum independence. For the toughest jobs
HD 1050 De Cage Independently usable high-pressure cleaner with electric start and a hard-wearing high-powered Yanmar diesel engine. Easy to transport due to large wheels with air tyres, favourable weight
More information4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
More informationM H Industrial Supply Sdn. Bhd. Air Hose. Bulk Materials Suction Hose. 1 of 38
M H Industrial Supply Sdn. Bhd. Air Hose Bulk Materials Suction Hose 1 of 38 2 of 38 Eagle 200 Air Hose Eagle 300 Air Hose 3 of 38 4 of 38 Fuel Hose Fuel Hose (Outer Braided) 5 of 38 LPG Hose 6 of 38 Multi
More informationPTFE HOSE. Product Guide
01 Product Guide 1.02 COMPANY PROFILE Pacific Hose Flex PRODUCT RANGE 1.03 Complete Range of Pacific Hose Flex Our office and factory is situated in South East Queensland, Australia. Our expertise began
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
More informationThermoplastic Hoses for Hydraulics & Industry
Thermoplastic Hoses for Hydraulics & Industry Catalogue 4460-UK Hüttenfeld / Germany Wissembourg / France Almelo / Netherlands Ravenna / Ohio Stafford / Texas Hose assemblies are used to transmit various
More informationAeroquip. Aluminum Compression Crimp Fittings
Aeroquip Aluminum Compression Crimp Fittings Table of Contents 666/667 Medium Pressure PTFE Hose and Aluminum Compression Crimp Fittings... 2 Aluminum Crimp Fittings... 3 Flared Fittings... 4 Flared Fitting
More informationEISELE LIQUIDLINE PROGRAM CONNECTIONS FOR COOLING WATER
PROGRAM CONNECTIONS FOR COOLING WATER QUALITY SOLUTIONS MADE BY EISELE LIQUID 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 3,500 standard articles,
More informationHIGH & ULTRA-HIGH PRESSURE SPECIALISTS WATER JETTING HYDRAULIC MINING NON CONDUCTIVE BOLT TENSIONING OFFSHORE BEVERAGE
HIGH & ULTRA-HIGH PRESSURE SPECIALISTS WATER JETTING HYDRAULIC MINING NON CONDUCTIVE BOLT TENSIONING OFFSHORE BEVERAGE Established in the UK in 1974, Abdex has evolved into one of the world s leading manufacturers
More informationPTFE HOSE. Range 1.01 PTFE HOSE SMOOTH BORE PTFE HOSE Size : 1/8 to 1 1/8 Profile : Smoothbore Working Pressure : 5800 to kpa
01 1.01 Range SMOOTH BORE : 1/ to 1 1/ Profile : Smoothbore Working : 500 to 2300 kpa HIGH PRESSURE SMOOTH BORE PTFE : 1/4 to 1 1/2 Profile : Smoothbore Working : 27600 to 34500 kpa TAPE WRAPPED CONVOLUTED
More informationSAFE USE AND HANDLING OF HOSES AND FLEXIBLE CONNECTIONS IN THE SOLVENTS INDUSTRY
GUIDANCE NOTE No. 60 SAFE USE AND HANDLING OF HOSES AND FLEXIBLE CONNECTIONS IN THE SOLVENTS INDUSTRY 1. Introduction The Solvents Industry Association has issued this Guidance Note because of the specific
More informationMODY Spiral Hoses made of Polyurethane
MODY Spiral Hoses made of Polyurethane both Sides with Straight Ends High abrasion, pressure and wear resistance Extreme and constant recoil of the spiral, small coil diameter Elasticity, flexibility and
More informationPerformance Products 2013 HOSE & FITTINGS. Unit 8/2 Carson Rd Malaga, WA 6090 Phone: Fax:
HOSE & FITTINGS Performance Products 2013 19 Performance Products Unit 8/2 Carson Rd Malaga, WA 6090 Phone: 92489994 Fax: 92489995 www.couplers.com.au Thread Sizes THREAD Performance Products typically
More informationWATER CLEANING & BLASTING
WATER CLEANING & BLASTING PRODUCT CATALOGUE 2016/2017 WE KEEP IT RUNNING HOSES SUMMARY WATER CLEANING & BLASTING HOSE RANGE The water cleaning hose range is dedicated to hobby and professional water cleaning
More informationMax. Operating Pressure. Inside Diameter. ft m in mm psi bar in mm
4, PSI HOSES Product Description. General purpose hoses are used to distribute high pressure water throughout the system.. Safety whips are six foot hoses that are connected between a waterblast control
More informationClamps. for Plastic Tubing & Hose. Fluid Transfer Specialists
Clamps for Plastic Tubing & Hose Fluid Transfer Specialists Oetiker Clamps Ear Type Clamps Oetiker ear type clamps breathe and adapt to the expansion and contraction of hose affected by thermodynamics
More informationPIPE PLUGS & PACKERS
PIPE PLUGS & PACKERS CONTENTS Small dimension plugs 1.1. Plugs of smaller dimensions PLUGY Z and PLUGSY S 4 1.2. Long plugs PLUGY DC 6 1.3. Gas plugs PLUGY G and PLUGSY gm 8 1.0. PNEUMATIC PIPE PLUGS Larger
More informationAeroquip 3,000 psi Teflon Hose and Hose Assemblies
Aeroquip 3,000 psi Teflon Hose and Hose Assemblies Lightweight Meets performance requirements of AS1339 50% tighter bend radius Improved flexing characteristics Weight savings Table of Contents 3 AE246
More informationFLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome 2 is
More informationMARINE OFFSHORE. VELLES GROUP Sp. z o.o. tel
DNV Det Norske Veritas Cert. n. CERT-04193-99-AQ IND-SINCERT EN 13765:2010, approved from CEN Directive 97/23/CE PED with operating Procedures certified from DNV - CE PED 07.0056.06/2585 Directive 94/9/CE
More informationLIQUIDLINE PROGRAM. Connections for cooling water. dezincification-resistant brass. Messing. aluminium.
LIQUIDLINE PROGRAM Connections for cooling water dezincification-resistant brass Messing aluminium stainless steel 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents,
More information