Petroleum calibration Standards & reference materials
|
|
- Randell Cameron
- 5 years ago
- Views:
Transcription
1 Specialists in analytical laboratory instrumentation and supplies for the (petro)chemical, food, pharmaceutical, paint and marine industry. Zematra is actively involved in important standardization bodies like ASTM, EI, CEN etc. This enables Zematra to inform her customers about the latest developments in existing methods and advise them of new methods Zematra BV, for more than Petroleum calibration Standards & reference materials Our ranges offers the most comprehensive selection of petroleum standards in the industry. Our petroleum standards are suitable for broad range of analysis Common applications for our single-element, multi-element, and custom- blended products include: - Used oil analysis for predictive engine failure analysis - QC analysis of motor oils and additives formulations - Crude and refined oils - Environment analysis of waste oils - Sulfur in fuels - Foods Oils - Coolants ISO Certifications VHG Labs is now part of LGC Standards, and holds accreditation to ISO 9001, ISO/IEC and ISO Guide 34, offering our customers the assurance that these certified reference materials (CRM) are manufactured and tested to the fullest extent by a company firmly committed to quality at all levels Our Petroleum Standards: Flash Point, Pour Point, Cloud Point, Freezing Point, Could Filter Plug Point, Distillation, Acid/ Base number, Moisture, Soot Content, Fuel Dilution, Biodiesel and Viscosity Flash Point FP Flash Point CRM for ASTM D93 (Pensky Martens Closed Cup Tester), Typical Flash Point Range 25 C-35 C 250ml FP Flash Point CRM for ASTM D93 (Pensky Martens Closed Cup Tester), Typical Flash Point Range 45 C-55 C 250ml FPPM Flash Point CRM for ASTM D93 (Pensky Martens Closed Cup Tester), Typical Flash Point Range 55 C-65 C 250ml FP Flash Point CRM for ASTM D93 (Pensky Martens Closed Cup Tester), Typical Flash Point Range 65 C-75 C 250ml FP Flash Point CRM for ASTM D93 (Pensky Martens Closed Cup Tester), Typical Flash Point Range 70 C-80 C 250ml FP Flash Point CRM for ASTM D93 (Pensky Martens Closed Cup Tester), Typical Flash Point Range 90 C-100 C 250ml FP Flash Point CRM for ASTM D93 (Pensky Martens Closed Cup Tester), Typical Flash Point Range 110 C-120 C 250ml FP Flash Point CRM for ASTM D93 (Pensky Martens Closed Cup Tester), Typical Flash Point Range 130 C-145 C 250ml FP Flash Point CRM for ASTM D92 (Cleveland Open Cup Tester), Typical Flash Point Range 110 C-120 C 250ml FP Flash Point CRM for ASTM D92 (Cleveland Open Cup Tester), Typical Flash Point Range 135 C-150 C 250ml FP Flash Point CRM for ASTM D92 (Cleveland Open Cup Tester), Typical Flash Point Range 190 C-215 C 250ml FP Flash Point CRM for ASTM D92 (Cleveland Open Cup Tester), Typical Flash Point Range 220 C-240 C 250ml FP Flash Point CRM for ASTM D56 (Tag Closed Cup Tester), Typical Flash Point Range 40 C-50 C 250ml FP Flash Point CRM for ASTM D56 (Tag Closed Cup Tester), Typical Flash Point Range 45 C-55 C 250ml FP Flash Point CRM for ASTM D56 (Tag Closed Cup Tester), Typical Flash Point Range 50 C-60 C 250ml FPTC Flash Point CRM for ASTM D56 (Tag Closed Cup Tester), Typical Flash Point Range 55 C-65 C 250ml FP Flash Point CRM for ASTM D56 (Tag Closed Cup Tester), Typical Flash Point Range 60 C-70 C 250ml
2 Cloud Point C2-250 ASTM D2500 Cloud Point Reference Material, Typical Point Range: -4 C to 0 C 250ml C5-250 ASTM D2500 Cloud Point Reference Material, Typical Point Range: +3 C to +9 C 250ml C ASTM D2500 Cloud Point Reference Material, Typical Point Range: -12 C to -8 C 250ml C ASTM D2500 Cloud Point Reference Material, Typical Point Range: -17 C to -13 C 250ml C ASTM D2500 Cloud Point Reference Material, Typical Point Range: -22 C to -18 C 250ml Pour Point P5-250 ASTM D97 Pour Point Reference Material, Typical Point Range: -7 C to-3 C * 250ml P ASTM D97 Pour Point Reference Material, Typical Point Range: -12 C to -8 C * 250ml P ASTM D97 Pour Point Reference Material, Typical Point Range: -17 C to -13 C * 250ml P ASTM D97 Pour Point Reference Material, Typical Point Range: -22 C to -18 C * 250ml P ASTM D97 Pour Point Reference Material, Typical Point Range: -42 C to -36 C * 250ml P ASTM D97 Pour Point Reference Material, Typical Point Range: -53 C to -47 C * 250ml * not intended for use with Phase Instruments Cold Filter Plug Point CFP1-250 ASTM D6371/IP 309 CFPP, Typical Point Range: -20 C to -17 C 250ml Distillation D ASTM D86 Group 4 Distillation Standard 500ml D ASTM D86 Group 1&2 Synth. Distillation standard 500ml Acid and Base Number AN G Acid number 0.1 mgkoh/g Reference standard in Hydrocarbon Oil 100 gr AN G Acid number 0.5 mgkoh/g Reference standard in Hydrocarbon Oil 100 gr AN 1-100G Acid number 1 mgkoh/g Reference standard in Hydrocarbon Oil 100 gr AN G Acid number 1.5 mgkoh/g Reference standard in Hydrocarbon Oil 100 gr AN 2-50G Acid number 2 mgkoh/g Reference standard in Hydrocarbon Oil 50gr AN 3-50G Acid number 3 mgkoh/g Reference standard in Hydrocarbon Oil 50gr BN 6-50G Base number 6 mgkoh/g Reference standard in Hydrocarbon Oil 50gr BN 10-50G Base number 10 mgkoh/g Reference standard in Hydrocarbon Oil 50gr BN 15-50G Base number 15 mgkoh/g Reference standard in Hydrocarbon Oil 50gr BN 30-50G Base number 30 mgkoh/g Reference standard in Hydrocarbon Oil 50gr BN 40-50G Base number 40 mgkoh/g Reference standard in Hydrocarbon Oil 50gr BN 70-50G Base number 70 mgkoh/g Reference standard in Hydrocarbon Oil 50gr
3 CRM Materials with different product nature, acc Iso All ROFA Certified Reference Materials meet the precision of ISO The production is according Guides 31, 34 & 35. Certified by Round Robin Method by independent test laboratories. Order code Test name Value Main Method GASOLINE Bottle Volume DE-GA-514 Density at 15 C kg/m3 ASTM D ml Automatic Distillation DI-GA-514 (Unleaded) 32,7 C / 180,2 C ASTM D ml VP-GA-514 Reid Vapour Pressure 64,0 kpa ASTM D ml BE-GA-514 Benzene Content % vol ASTM D ml AC-GA-514 Aromatic Content 26.9 % vol ASTM D ml GASOLINE OM-GA-095 Motor Octane Number E95 (Unleaded) 85,9 ASTM D ml OR-GA-095 Research Octane Number E95 (Unleaded) 97,2 ASTM D ml GASOLINE OM-GA-098 Motor Octane Number E98 (Unleaded) 87,5 ASTM D ml OR-GA-098 Research Octane Number E98 (Unleaded) 98,9 ASTM D ml JET AVIATION Fuel DE-KR-444 Density at 15 C 792,7 kg/m3 ASTM D ml FR-KR-444 Freezing Point C ASTM D ml DI-KR-444 Automatic Distillation 149 C / 256 C ASTM D ml SU-KR-444 Sulphur of Mercaptans 3.13 mg/kg ISO ml AD-KR-444 Acidity mgkoh/g ASTM D ml FI-KR-444 FIA Aromatics 19,3 % Vol ASTM D ml AB-KR-444 Abel Flash Point 40.6 C IP ml VI-KR-444 Kinematic Viscosity -20 C mm²/s ASTM D ml FT-KR-444 TAG Flash Point 41.7 C ASTM D ml SP-KR-444 Smoke Point 24.4 mm ASTM ml AP-KR-444 Aniline Point 58,9 C ASTM D ml DIESEL DE-GO-350 Density at 15 C 833,8 kg/m3 ASTM D ml CP-GO-350 Cloud Point - 6,4 C ASTM D ml PP-GO-350 Pour Point C ASTM D ml DI-GO-350 Automatic Distillation 164 C / 360 C ASTM D ml PM-GO-350 Pensky Martens Flash Point 60,2 C ASTM D 93 -A 250 ml VI Kinematic Viscosity +20 C 3,963 mm²/s ASTM D ml VI Kinematic Viscosity +40 C 2,591 mm²/s ASTM D ml FA-GO-350 FAME Content B=6.5% Volume EN ml SU-GO-350 Sulphur Content 7,10 mg/kg ASTM D ml
4 Order code Test name Value Main Method Bottle Volume CF-GO-209 DIESEL Cold Filter Plugging Point C EN 116 / IP ml DIESEL SU-GO-555 Sulphur Content 7,2 mg/kg EN 116 / IP ml DIESEL FA-GO-919 FAME Content B=3% Volume EN ml DIESEL DE-GO-888 Density at 15 C 836,39 kg/m3 ASTM D ml CP-GO-888 Cloud Point - 3,3 C ASTM D ml PP-GO-888 Pour Point C ASTM D ml CN-GO-888 Cetane Number 52,6 ASTM D ml LUBRICANT PM-LU-456 Pensky Martens Flash Point 203 C ASTM D ml LUBRICANT DE-LU-671 Density at 15 C 868,7 kg/m3 ASTM D ml FC-LU-671 Cleveland Flash Point 268 C ASTM D ml PM-LU-671 Pensky Martens Flash Point 247 C ASTM D ml PP-LU-671 Pour Point C ASTM D ml Moisture KF-BLK-100 Karl Fischer Titration Reference Standard in 10W30 Motor Oil 0.0 wt.% H2O KF-0.05P-100 Karl Fischer, nominal water conc. 0.05% in 10W30 motor oil KF-0.1P wt.% H2O in 10W30 motor oil KF-0.5P wt.% H2O in 10W30 motor oil KF-1.0P wt.% H2O in 10W30 motor oil CT-BLK-100 Crackle Test Reference Standard in 10W30 Motor Oil 0.0wt.% H2O CT-0.05P-100 Crackle Test Reference Standard 0.05 wt.% H2O in 10W30 motor oil CT-0.1P-100 Crackle Test Reference Standard 0.1 wt.% H2O in 10W30 motor oil CT-0.5P-100 Crackle Test Reference Standard 0.5 wt.% H2O in 10W30 motor oil CT-1.0P wt.% H2O in 10W30 motor oil Soot Content SOOT-BLK-50 Soot Content Standard in 15W40 Diesel Oil Blank 50ml SOOT-A-50 Soot Content Standard in 15W40 Diesel Oil 0.5-wt% 50ml SOOT-B-50 Soot Content Standard in 15W40 Diesel Oil 2-4wt% 50ml SOOT-C-50 Soot Content Standard in 15W40 Diesel Oil 4-6wt% 50ml SOOT-D-50 Soot Content Standard in 15W40 Diesel Oil 6-9wt% 50ml SOOT-E-50 Soot Content Standard in 15W40 Diesel Oil 9-12wt% 50ml SOOT-SET Soot Content Standard SET in 15W40 Diesel Oil 6x50ml
5 Fuel dilution DSLFD-BLK-100 Devolatilized Diesel Fuel in 75 cst Base oil DSLFD-2P-100 2% (v/v) Devolatilized High Cetane Diesel Fuel (10% lights removed) in 75 cst Hydrocarbon Oil DSLFD-4P-100 4% (v/v) Devolatilized High Cetane Diesel Fuel (10% lights removed) in 75 cst Hydrocarbon Oil DSLFD-5P-100 5% (v/v) Devolatilized High Cetane Diesel Fuel (10% lights removed) in 75 cst Hydrocarbon Oil DSLFD-10P % (v/v) Devolatilized High Cetane Diesel Fuel (10% lights removed) in 75 cst Hydrocarbon Oil GASFD-BLK-100 Devolatilized Diesel Fuel in 75 cst Base oil (OIL-75) GASFD-2P-100 2% (v/v) Devolatilized Gasoline (10% lights removed at 160F) in 75 cst Hydrocarbon Oil. Bottled in a 100 ml Wide Mouth Glass Bottle For Use with GC, IR or Flash Point GASFD-5P-100 5% (v/v) Devolatilized Gasoline (10% lights removed at 160F) in 75 cst Hydrocarbon Oil. Bottled in a 100 ml Wide Mouth Glass Bottle For Use with GC, IR or Flash Point GASFD-10P % (v/v) Devolatilized Gasoline (10% lights removed at 160F) in 75 cst Hydrocarbon Oil. Bottled in a 100 ml Wide Mouth Glass Bottle For Use with GC, IR or Flash Point Biodiesel Standards Metals in biodiesel B100M G Multi Element Biodiesel Standard in B100 Biodiesel 5µg/g, Ca,K,Mg,Na,P 100g B100M G Multi Element Biodiesel Standard in B100 Biodiesel 10µg/g, Ca,K,Mg,Na,P 100g B100M G Multi Element Biodiesel Standard in B100 Biodiesel 20µg/g, Ca,K,Mg,Na,P 100g B100-BLK-100 Biodiesel, B100-BLK-500 Biodiesel, 500ml 500ml Sulfur in Biodiesel SB µg/g in B100 Biodiesel SB µg/g in B100 Biodiesel SB µg/g in B100 Biodiesel SB µg/g in B100 Biodiesel SB µg/g in B100 Biodiesel SB µg/g in B100 Biodiesel SB µg/g in B100 Biodiesel SB µg/g in B100 Biodiesel B100-BLK-100 Biodiesel, B100-BLK-500 Biodiesel, 500ml 500ml Micro Carbon Residue Tester ASTM D4530 MCRT low Carbon Residue Ref, 0,3%, Cert 1 bottle ASTM D4530 MCRT Low Carbon Residue Ref, 2%, Cert 1 bottle ASTM D4530 MCRT Medium Carbon Residue Ref, 10,6%, Cert 1 bottle ASTM D4530 MCRT High Carbon Residue Ref, 24,0%, Cert 1 bottle
6 Biodiesel/ Diesel Fuel Blend BDBLEND-2P-20 2% Biodiesel / 98% High Cetane Diesel Fuel v/v 20ml BDBLEND-5P-20 5% Biodiesel / 95% High Cetane Diesel Fuel v/v 20ml BDBLEND-10P-20 10% Biodiesel / 90% High Cetane Diesel Fuel v/v 20ml BDBLEND-15P-20 15% Biodiesel / 85% High Cetane Diesel Fuel v/v 20ml BDBLEND-20P-20 20% Biodiesel / 80% High Cetane Diesel Fuel v/v 20ml BDBLEND-25P-20 25% Biodiesel / 75% High Cetane Diesel Fuel v/v 20ml BDBLEND-30P-20 30% Biodiesel / 70% High Cetane Diesel Fuel v/v 20ml BDBLEND-100P % Biodiesel 20ml BDBLEND-BLK % High Cetane Diesel Fuel 20ml Foam Tendency Foam Tendency according ASTM D892 & ASTM D6082 F-100 Test Sequence I, II & III, Temperature range 24 C & 93,5 C 950ml F-200 Test Sequence II & IV, Temperature range 93.5 C & 150 C 950ml RPVOT Reference Oil RPVOT Reference Oil ASTM D 2272 QMR Nominal Break time in Minutes 794 minutes 950ml QHR Nominal Break time in Minutes 1244 minutes 950ml Viscosity All Cannon viscosity standards meet the precision of ASTM D445/446 and ISO 3104/3105, and are traceable to the NIST (National Institute of Standards and Technology) Cannon Viscosity standards are manufactured and/or certified in Cannon ISO 9001/2000 registered and A2LA accredited laboratory. A2LA has accredited Cannon for technical competence in the field of calibration (certificate number ). the accreditation includes the determination of kinematic and dynamic viscosity (including that of viscosity standards and customer samples) in accordance with ISO/IEC All calibration are based on the master viscometer procedures detailed in ASTM D2162 Cannon has been delegated by NIST to provide U.S. national measurement standards and to issue calibration and measurement certificates for certified liquid viscosity reference standards. Cannon supplies viscosity standards in a variety of container sizes. The default container size for most standards is the 500ml bottle. Standards are also available in 120ml, 1 liter and 3,8 liter (1 Gallon)
7 Viscosity Standards Catalog number Viscosity standard 20 C 25 C C 40 C 50 C 60 C 80 C 100 C 9727-C10 N.4Ɨ 0,32 0,3 0,28 0, C15 N.8Ɨ 0,64 0,6 0,52 0, C20 N1.0Ɨ 0,93 0,86 0,72 0,7 0, C22 N2 2,2 2 1,6 1,5 1,3 0,85 0, C25 S3 3,9 3,3 2,5 2,4 1,9 1,2 0, C27 N4 5,2 4,5 3,3 3,1 2,5 1,4 1, C30 S ,3 5 3,8 2 1, C31 N ,5 6,3 5,9 4,5 2,4 1, C32 N ,5 8,8 6,3 2, C34 N ,2 3,8 2, C35 S , C36 N , C37 N ,1 4, C38 N ,5 5, C40 S , C41 N , C42 N , C43 N C45 S C46 N C47 N C48 N C50 S C51 N C52 N C53 N C55 S C56 N C57 N C58 N C60 S C61 N C62 N C63 N C65 S Ɨ Incurs additional shipping charges due to low flash point.
8 High Viscosity Standards Dynamic Viscosity in mpa s (cp) Kinematic Viscosity mm2/s (cst) Catalog number Viscosity standard 20 C 25 C 40 C 60 C 135 C 60 C 100 C 135 C 9727-E10 N C52 N E15 N C57 N E20 N C62 N E25 N E27 N E29 N E30 N E35 N E40 N E42 N SP dynamic Shear Rheometer (DSR) standard at 52,58, 64, 70 & 76 C. Low Temperature Viscosity Standards For Low Gear Temperature Gear Oils (SAE 70W, 75W, 80W & 85W) Also ATF fluid ASTM D2983 Catalog number Viscosity standard Approximate Viscosity in mm2/s (cst) /mpa s (cp) except where noted -55 C -40 C -34 C -29 C -26 C -25 C -23 C -20 C -18 C -12 C -10 C -7 C 0 C 9727-G10 N27B G12 N27C G15 N115B G25 N60B G30 N120B G35 N480B G40 N1400B G45 N2B* 8mm2/s 9727-G50 N74B G55 N38B G60 N25B G65 N14B * Incurs additional shipping charges due to low flashpoint
9 For Cannon Mini Rotary Viscometer (CMRV) ASTM D3829 and ASTM D4684 Catalog Viscosity Approximate Viscosity number standard 9727-T10 N105B mPa.s (cp) at -20 C; CMRV Viscosity standard mPa.s (cp) at -25 C, CMRV Viscosity standard 9727-T20 YS-30 Exhibits yield stress of 70 Pa ±35 Pa at -30 C 9727-T25 YS-35 Exhibits yield stress of 70 Pa ±35 Pa at -35 C For High Temperature High Shear Viscometer (HTHS) measurement at 150 C and 10⁶s shear rate ASTM D 5481 Dynamic Viscosity in mpa s (cp) Catalog number Viscosity 100 C 150 C standard 9727-U45 HT U50 HT U55 HT U60 HT U65 HT U70 HT U92 HTNN-1 3.6* 9727-U94 HTNN-2 3.1* * Non- Newton standard Data at 10-6s-1
10 Cannon CCS Viscosity standards Cannon CL Standards provide certified dynamic viscosity data (in cp or mpa.s) at temperatures from - 5 C to -35 C. these standards are used to calibrate the CANNON Cold Cranking Simulator (CCS) oil testing. ASTM D5293 and SAE Specification J300. Viscosity standard range from CL80 till CL740, totally a range of 27 values. Optional or as set of 8/18pcs. Catalog number Viscosity Standard -5 C -10 C -15 C -18 C -20 C -25 C -30 C -35 C -40 C 9727-N02 CL N04 CL N06 CL N07 CL N08 CL N09 CL N10 CL N11 CL N12 CL N13 CL N14 CL N16 CL N18 CL N20 CL N22 CL N24 CL N26 CL N28 CL N30 CL N31 CL N32 CL N33 CL N34 CL N35 CL N36 CL N37 CL N38 CL N42 Set of 8 Set of CCS Low Temp Standards includes CL140, CL 190, CL220, CL250, CL280, CL320, CL480 & CL N43 Set of 18 Set of CCS 2050/2100/2100LT Low Temp Standards includes CL080, CL090, CL100, CL110, CL120, CL130, CL140, CL150, CL160, CL190, CL220, CL250 (2x), CL280, CL320, CL380, CL480 & CL600.
11 Certified Colour Reference Standards Oils, Fuels and Chemicals Lovibond Reference Liquids AOCS-Tintometer - ASTM Color Gardner - Lovibond RYBN- PT-Co/Hazen/APHA - Saybolt Ideal for routine calibration of colour measuring instruments & verification of test data Ensure good inter-laboratory and inter-instrument correlation Applications in statistical quality control (SQC) and statistical process control (SPC) High stability standards with a guaranteed 12-month shelf-life Full traceability to internationally recognised standards - ASTM, Gardner & Saybolt Colour standards certified to ISO AOCS-Tintometer, Lovibond RYBN & Pt-Co Colour certified under ISO 9001 quality system All classified as non-hazardous according to EU directives Each bottle supplied with full certification including MSDS Colour Scale AOCS- Tintometer Colour (AOCS Cc 13j-97, Cc 13b-45) ASTM Color (ASTM D6045, D1500) Gardner Colour (ASTM D1544, D6166) Lovibond RYBN Colour (AOCS Cc 13j-97) Platinum-Cobalt Colour (ASTM D1209) Saybolt Colour (ASTM D6045, D156) Nominal Certified Value Order Code Accreditation Standard 0.3R 2.0 Y (5¼ ) ISO R 9.0 Y (5¼ ) ISO R 12.0 Y (5¼ ) ISO R 22.0 Y (5¼ ) ISO R 28.0 Y (5¼ ) ISO (<0.5) ISO ISO ISO ISO ISO ISO ISO R 2.0Y 0.1N (5¼ ) ISO R 4.0Y 0.5N (5¼ ) ISO R 7.0Y 0.5N (5¼ ) ISO R 11.0Y 0.5N (5¼ ) ISO R 14.0Y 0.7N (5¼ ) ISO R 22.0Y 0.8N (5¼ ) ISO R 33.0Y 0.1N (5¼ ) ISO mg Pt/l ISO mg Pt/l ISO mg Pt/l ISO mg Pt/l ISO mg Pt/l ISO mg Pt/l ISO mg Pt/l ISO ISO ISO ISO ISO 17025
12 Conostan Oil Analysis Standards CONOSTAN products are used extensively in the calibration and operation of analytical instruments for the analysis of elements in oil and other organic fluids. CONOSTAN is the only source of multi-element metalorganic standards in the history of the National Institute of Standards & Technology (NIST). The variety of products afford convenience as reference and routine analytical materials for ICP, DCP, Rotating Disc Electrode (RDE), XRF, AA, and other analytical spectrometer techniques. CONOSTAN products are optimized for: Compatibility: 33 elements can be combined over an extensive concentration range - Viscosity: Viscosity range at room temperature is ideal for instrumental applications. - Instrumental Response: Excellent analytical response over a wide range of analytical applications. - Shelf life: All CONOSTANR element standards and spectroscopy products have a one year minimum shelf life from the date of shipment. Single element standards in oil Single-element CONOSTANR standards are especially useful for atomic absorption and X-ray fluorescence determinations. The matrix oil for these standards is high purity hydrocarbon oil with a 17 cst viscosity at 40 C and flash point of 175 C (20 Blank Oil). They are available at the following metal concentrations. The 1000 and 5000 ppm standards can be used as a source of single-element calibration standard for your specific applications using all types of spectroscopic methods of analysis. Multi-element standards in oil Multi-element Conostan standards are especially useful for ICP, RDE, and DCP analysis of metals in oil. They are available in high purity hydrocarbon oil solutions and are blended to approximately 70 cst viscosity at 40 C and flash point of 215 C (75 Blank Oil). They contain equal amounts of each element. Concentrations not listed are available as custom multi-element standards on request. You may create your own S-21 and S-12 standards by adding additional elements to the stocked product standards. CONOSTAN Biodiesel standards A new line of CONOSTANR biodiesel standards for the analysis of metals and sulfur in biodiesel fuel. Manufactured in accordance to ASTM methods D7039, D6751, D5453 and EN14214 for ICP and XRF analysis. Complete with a certificate of analysis. Standards according ASTM Methods for petrochemical analysis by GC Biodiesel fuel calibration standards (ASTM D6584, EN 14105:2003) Oil companies and vehicle manufacturers are actively working with biofuel extender producers to have agreed standards for esterified vegetable oils suitable for blending with conventional diesel to ensure that the product meets the technical requirements of modern diesel engines. The minimum test requirements for biodiesel blend extenders are specified in ASTM D6751 in USA and EN14214 within Europe. At present a limit of 5% FAME is allowed in diesel and this 5% must conform to the EN14214 standard. Both ASTM D-6751 and EN specify the use of ASTM Method D-6584 for glycerin determination.
13 ASTM D 6584 standard solutions This test method covers the quantitative determination of free and total glycerin in B-100 methyl esters by gas chromatography. The range of detection for free glycerin is to 0.05 mass %, and total glycerin from 0.05 to 0.5 mass %. This procedure is not applicable to vegetable oil methyl esters obtained from lauric oils, such as coconut oil and palm kernel oil. U-RGO ASTM D-6584 Standard Solution 1ml Solvent: Pyridine Diolein 50 μg/ml Monoolein 100 μg/ml Glycerol 5 μg/ml Triolein 50 μg/ml EN 14105:2003 standard solutions Free and total glycerol and mono-, di-, tri-glyceride content Method EN is used to determine glycerin and total glycerine in fatty acid methyl esters (FAME) used in biodiesel products. Samples are derivatized, then analyze U-RGO EN 14105:2003 Standard Solution 1ml Solvent: Pyridine Butanetriol 80 μg/ml Glycerol 5 μg/ml Tricaprin 800 μg/ml 1,3-Diolein 50 μg/ml Monoolein 250 μg/ml Tiolein 50 μg/ml ASTM Method D2887 Boiling range distribution of petroleum fractions by GC Method D2887 covers the determination of the boiling range distribution of petroleum products. The test method is applicable to petroleum products and fractions having a final boiling point of 538 C (1000 F) or lower at atmospheric pressure as measured by this test method. The test method is limited to samples having a boiling range greater than 55 C (100 F), and having a vapor pressure sufficiently low to permit sampling at ambient temperature. U-ASTM ASTM Method D2887 Column Test Mixture 1ml n-hexane 6 % (w/w) n-dodecane 12 % (w/w) n-octacosane 1 % (w/w) n-heptane 6 % (w/w) n-tetradecane 12 % (w/w) n-dotriacontane 1 % (w/w) n-octane 8 % (w/w) n-hexadecane 10 % (w/w) n-hexatriacontane 1 % (w/w) n-nonane 8 % (w/w) n-octadecane 5 % (w/w) n-tetracontane 1 % (w/w) n-decane 12 % (w/w) n-eicosane 2 % (w/w) n-tetratetracontane 1 % (w/w) n-undecane 12 % (w/w) n-tetracosane 2 % (w/w) ASTM Method D3710 Boiling range distribution of gasoline and gasoline fractions by GC Method D3710 covers the determination of the boiling range distribution of gasoline and gasoline components. The test method is applicable to petroleum products and fractions with a final boiling point of 500 F (260 C) or lower. U-ASTM ASTM Method D3710 Calibration Mixture 1ml 2-Methylbutane 10 % (v/v) Toluene 12 % (v/v) n-dodecane 4 % (v/v) n-pentane 8 % (v/v) n-octane 5 % (v/v) n-tridecane 2 % (v/v) 2-methylpentane 6 % (v/v) p-xylene 14 % (v/v) n-tetradecane 2 % (v/v) n-hexane 6 % (v/v) n-propylbenzene 5 % (v/v) n-pentadecane 2 % (v/v) 2,4-Dimethylpentane 6 % (v/v) n-decane 4 % (v/v)
14 ASTM Method D4815 MTBE, ETBE, TAME, DIPE, tertiary-amyl alcohol and C1 to C4 alcohols in gasoline Method D4815 covers the determination of ethers and alcohols in gasolines by gas chromatography. U-RGO ASTM D4815 Quantitative Peak ID Mixture 1ml Methanol 7.30 % (w/w) n-butyl alcohol 7.30 % (w/w) Ethyl alcohol (Ethanol) 7.30 % (w/w) tert-amyl methyl ether (TAME) 7.30 % (w/w) Isopropyl alcohol (Isopropanol) 7.30 % (w/w) 1,2-Dimethoxyethane (DME) 6.00 % (w/w) tert-butanol 7.30 % (w/w) Benzene 5.00 % (w/w) 1-Propanol 7.30 % (w/w) Methylcyclopentane 4.00 % (w/w) sec-butanol (2-Butanol) 7.30 % (w/w) tert-dutylmethyl ether (MTBE) 4.00 % (w/w) Isobutyl alcohol 7.30 % (w/w) Isopropyl ether 4.00 % (w/w) tert-pentanol (tert-amyl alcohol) 7.30 % (w/w) tert-butyl ethyl ether (ETBE) 4.00 % (w/w) For the Conostan, single and multi-element, reference materials as for the ASTM Petrochemical standards for GC applications, there are lots of variety possible, ask for the possibility what Zematra can offer.
Viscosity & Flash Point Standards For Reference, Validation, and Calibration
For Reference, Validation, and Calibration Since 1938 CANNON Instrument Company has been a leader in viscosity measurement. We provide a broad range of viscosity standards and flash point reference materials
More informationViscosity & Flash Point Standards For Reference, Validation, and Calibration
& Flash Point s For Reference, Validation, and Calibration Since 1938 CANNON Instrument Company has been a leader in viscosity measurement. We provide a broad range of viscosity standards and flash point
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
More informationSCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION InnoTech Alberta Inc.
More informationMulti-Parameter Certified Reference Material
Multi-Parameter Certified Reference Material MPCRM s are premium level, dual certified reference materials certified in accordance with both ISO 17025 and ISO Guide 34 under our UKAS accreditation. They
More informationParagon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
More informationCOOPER BASIN CRUDE OIL. Santos Limited
Crude Assay Job Number 13-September-2016 43.1 API
More informationAnnex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
More informationStandard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
More informationReference Standards Petroleum & Petrochemical
Reference Standards Petroleum & Petrochemical Biodiesel Finished Motor Oil & Aviation Gasoline Leaking Underground Storage Tank (LUST) PCBs in Transformer Oil Simulated Distillation Biodiesel ASTM Method
More informationProviding Industry with turn key solutions - worldwide
Providing Industry with turn key solutions - worldwide SECTION 1 Introduction 2 Our Accreditation Flash Point Standards Cleveland Open Cup Flash Point Pensky-Martens Flash Point Viscosity Standards CCS
More informationGroup-Type Analysis (PiPNA) in Diesel and Jet Fuel by Flow Modulated GCxGC FID.
Group-Type Analysis (PiPNA) in Diesel and Jet Fuel by Flow Modulated GCxGC FID. Dedicated PiPNA + FAME For (Bio-)Diesel and Jet Fuels Robust System, Easy to use No Cryogenic coolant Required Keywords:
More informationNEW? REFERENCE STANDARDS PETROLEUM & PETROCHEMICAL MATERIALS. What s. look for this circle
REFERENCE STANDARDS PETROLEUM & PETROCHEMICAL MATERIALS ASTM Methods D2887-01 and D3710-95 (Simulated Distillation)......515 D3606-07 (Benzene & Toluene in Finished Motor & Aviation Gasoline)..........................515
More informationASTM D Test to Low ppb. Contact us today for a copy of the Southwest Research Institute D-5453 Fitness for Use Report.
D-1319 to D-2500 D-5453 Test to Low ppb Contact us today for a copy of the Southwest Research Institute D-5453 Fitness for Use Report. AccuStandard s Low Standards Quick analysis using ANTEK s 9000 Series
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical
More informationSupply of Services for Detailed OEB Crude Assay Analysis
Tender Number [9900009229] Supply of Services for Detailed OEB Crude Assay Analysis SCOPE OF WORK SCOPE OF WORK 1. Introduction Orpic is the brand name for Oman Oil Refineries and Petroleum Industries
More informationVHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis
VHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis Metallo-Organic Standards from VHG Labs VHG Labs has been a provider of quality analytical products and services for over 25 years.
More informationCeiba Crude (31.44 API, Sul WT%)
Ceiba Crude (31.44 API, 0.398 Sul WT%) Crude Name: Ceiba Crude API Gravity API 31.44 Component Wt % Vol % Crude ID: CEIBA2015 Density @15 deg C KG/L 0.8679 C2 Minus 0.004 0.01 Country: Equatorial Guinea
More informationOxygenates in Fuels Analysis Solutions From Trace Levels to Ethanol Fuels
Oxygenates in Fuels Analysis Solutions From Trace Levels to Ethanol Fuels James D. McCurry Senior Scientist Agilent Technologies Wilmington, DE USA Page 1 Application Summary There is a need to measure
More informationProduction of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria
Production of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria Alabadan B.A. Department of Agricultural and Bioresources Engineering, Federal University, Oye Ekiti. Ajayi
More informationMUTINEER EXETER CRUDE OIL. Santos Limited
Crude Assay Job Number 08-January-2015 43.1 API 0.10 mgkoh/g TAN 0.038 %m Sulphur 11.8 K Factor on behalf of Santos Limited :Report By Approved By: Joshua Camens Lab. Supervisor Jhonas Fernandez Lab. Manager
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that EPA National Vehicle and Fuel Emissions Laboratory
More informationNational Oil Corporation Libyan Petroleum Institute. Crude oil assay Sarir crude oil
National Oil Corporation Libyan Petroleum Institute Crude oil assay Sarir crude oil Work Order No. LPI- 00344/10/IL02/2008 Client: National Oil Corporation Date of Issue: Dec., 2008 Prepared by: Industrial
More informationNational Oil Corporation Libyan Petroleum Institute. Crude Oil Assay Messla Crude Oil
National Oil Corporation Libyan Petroleum Institute Crude Oil Assay Messla Crude Oil Work Order No. LPI- 00344/08/IL02/2008 Client: National Oil Corporation Date of Issue: Nov., 2008 Prepared by: Industrial
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911
More information224 Sulfur Standards 224 Biodiesel 225 Crude Oil 225 Diesel 225 Isooctane 226 Mineral Oil 226 Residual Oil SCP SCIENCE
SCP SCIENCE 211 conostan - oil analysis standards SCP SCIENCE is proud to present CONOSTAN - the world s most trusted name in Oil Standards, whose industryleading position is the result of a uniquely superior
More informationQuality. Integrity. Confidence
Products & Services Quality. Integrity. Confidence Contents Paragon Scientific Background Information 4 Certified Reference Materials (CRMs) 8 Certified Reference Materials ISO Guide 34 Certified Reference
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
More informationALL TESTS. Density Oscillating U-tube method * IP 365. Distillation characteristics of petroleum products - Micro distillation method IP 596
Tests marked * are ISO17025 accredited ALL TESTS TEST NAME Density Oscillating U-tube * IP 365 Distillation characteristics of petroleum products - Micro distillation IP 596 Mercaptans, hydrogen sulphide,
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18436-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.01.2018 to 28.10.2019 Holder of certificate: ISP
More informationApplication Note. Determination of Oxygenates in C2, C3, C4 and C5 hydrocarbon Matrices according ASTM D using AC OXYTRACER
Determination of Oxygenates in C2, C3, C4 and C5 hydrocarbon Matrices according ASTM D7423-09 using AC OXYTRACER Fast Analysis in
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
More informationTung Xiao Dan Assistant Chemist Mark Tan Section Head Feedstock Evaluation Department
Sample ID : Lab ID : Date : Client : Chim Sao Crude 2014-FED-051699 01 October 2014 Premier Oil Sample Number : Sample Date : Sample Time : Location : 4/4 10/9/2014 1500hrs Run Down Reported by : Approved
More informationAnalysis of Petroleum Fractions by ASTM D2887
Analysis of Petroleum Fractions by ASTM D2887 Peter Morgan, Thermo Fisher Scientific, Runcorn, Cheshire, UK Application Note 2582 Key Words Simulated distillation, D2887, TRACE TR-SimDist Abstract ASTM
More informationAlberta Innovates - Technology Futures ~ Fuels & Lubricants
Report To: 5 Kings College Road Toronto, Ontario, M5S 3G8 Attention: Curtis Wan E-mail: curtis.wan@utoronto.ca Fax: Alberta Innovates - Technology Futures ~ Fuels & Lubricants 250 Karl Clark Road, Edmonton,
More informationPetroChemical Standards
PetroChemical Standards This selection of Biofuel reference standards. Includes FAMEs & FAEEs from most popular biomasses, sulfurs, physical standards, wear metals, and free & total glycerin. Reference
More informationCrude Assay Report. Crude Oil sample marked. Barrow Crude Oil. On Behalf Of. Chevron Australia Pty Ltd. Laboratory Supervisor. Crude Assay Chemist
Crude Assay Report on Crude Oil sample marked Barrow Crude Oil On Behalf Of Chevron Australia Pty Ltd. Reported by: Approved by: Michelle Fernandez Laboratory Supervisor Jhonas Fernandez Crude Assay Chemist
More informationRegional Laboratory, Indian Oil Corporation Limited, Korukkupet Terminal, Kathivakkam High Road, Chennai, Tamil Nadu
Regional, Indian Oil Corporation Limited, Korukkupet Last Amended on 07.01.2014 Page 1 of 5 Specific Method Specification against Range of ing / I. PETROLEUM PRODUCTS 1. JetA1, JP5 Acidity, Total P-113
More informationANNEX 2, REFERENCE FUELS
ANNEX 2, REFERENCE FUELS A.2.1. A.2.1.1. EUROPE, INDIA, SOUTH AFRICA Petrol (E5) Parameter Unit Limits (1) Test method Research octane number, RON 95.0 EN 25164 pren ISO 5164 Motor octane number, MON 85.0
More informationOur Focus is Quality to Meet Your Standards
Our Focus is Quality to Meet Your Standards UcalibrateIT offers a full line of Certified and Custom Made Calibration Standards. We work with leading manufacturers to produce a wide range of Petroleum,
More information10.6 Scope of Accreditation
Testing Laboratory Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration
More informationISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
More informationDetermination of Free and Total Glycerin in B100 Biodiesel
Page 1 of 5 Page 1 of 5 Return to Web Version Determination of Free and Total Glycerin in B100 Biodiesel By: Michael D. Buchanan, Katherine K. Stenerson, and Vicki Yearick, Reporter US Vol 27.1 techservice@sial.com
More informationPetroChemical Standards
PetroChemical Standards Widest selection of Biofuel reference standards. Includes FAMEs & FAEEs from most popular biomasses, sulfurs, physical standards, wear metals, and free & total glycerin. Reference
More informationOIL PT. Scheme Description. Oils and Fuels Analysis Proficiency Testing Scheme
OIL PT Oils and Fuels Analysis Proficiency Testing Scheme Scheme Description LGC Standards Proficiency Testing 1 Chamberhall Business Park Chamberhall Green Bury, BL9 0AP UK. Telephone: +44 (0) 161 762
More information炭化水素 - 直鎖炭化水素 炭化水素 - 炭化水素及びアルコール類
炭化水素 - 直鎖炭化水素 Column : Equity-, 0 m x 0. mm ID, 0. µm Cat. No. : 0-U Column : Equity-, 0 m x 0. mm ID, 0. µm Cat. No. : 09-U Oven : 0 ( min), /min to ( min) Inj.: Track oven Det. : FID, Carrier gas: Helium,.
More informationANNEX 3 REFERENCE FUELS. Parameter Unit Limits (1) Test method Minimum Maximum Research octane number, RON
WLTP-2012-018 Annex 3 Draft Reference fuels 03.06.2012 ANNEX 3 REFERENCE FUELS The reference fuel specifications listed in this annex are those that are to be used for the WLTP Validation 2 exercise and
More informationAnalysis of gas condensate and its different fractions of Bibiyana gas field to produce valuable products
Available online at www.banglajol.info Bangladesh J. Sci. Ind. Res. 50(1), 59-64, 2015 Analysis of gas condensate and its different fractions of Bibiyana gas field to produce valuable products S. M. A.
More informationSoftening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer
Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification
More informationApplication Note. Author. Introduction. Energy and Fuels
Analysis of Free and Total Glycerol in B-100 Biodiesel Methyl Esters Using Agilent Select Biodiesel for Glycerides Application Note Energy and Fuels Author John Oostdijk Agilent Technologies, Inc. Introduction
More informationApplication. Gas Chromatography June 1995
Determining Oxygenates in Gasoline: ASTM Method D Application Gas Chromatography June 99 Authors Michael J. Szelewski Agilent Technologies, Inc. 0 Centerville Road Wilmington, DE 90-60 USA Matthew S. Klee
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Nordic Camp Supply Kabul (HKIA) Fuel Testing
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB17930-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2016 Replacing
More informationASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels
ASTM D 6751 02 Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels Summary This module describes the key elements in ASTM Specifications and Standard Test Methods ASTM Specification
More informationAnalysis of Glycerin and Glycerides in Biodiesel (B100) Using ASTM D6584 and EN Application. Author. Abstract. Introduction
Analysis of Glycerin and Glycerides in Biodiesel (B1) Using ASTM D68 and EN11 Application HPI/Petrochemicals/Polymers Author James D. McCurry Agilent Technologies, Inc. 8 Centerville Road Wilmington, DE
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ITS Testing Services (UK) Limited (Caleb Brett - Downstream) Caleb Brett House Unit A 734 London Road West Thurrock Grays Essex RM20 3NL Contact:
More informationLouis Dreyfus Claypool Holdings, LLC. Biodiesel Production Plant Claypool, Indiana
Louis Dreyfus Claypool Holdings, LLC Biodiesel Production Plant Claypool, Indiana Soybeans 163,000 Bu. = 48 Railcars = 172 Trucks Electricity 156,695 Kwh Natural Gas 3,049 Dth Claypool Inputs/Outputs Per
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
More informationInternational Quality Assurance Exchange Program Schedule. Fuel Month Number Type Dispatch Date Closing Date
Fuel 2018 Month Number Type Dispatch Date Closing Date January February March April May June July August September October November December M902 Motor Gasoline, Premium A372 Aviation Gasoline, 100LL D295
More informationVISCOSITY CALIBRATION STANDARDS
VISCOSITY CALIBRATION STANDARDS Cold-Cranking Simulator Standards (CCS) ASTM D 9 ISO 170 certified CCS viscosity standards are for the calibration and verification of analytical equipment used in Cold
More informationCertificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,
More informationComprehensive Gas Chromatography (GCxGC) Analysis of High-Ethanol Containing Motor Fuels
Paper # 160-6 Comprehensive Gas Chromatography (GCxGC) Analysis of High-Ethanol Containing Motor Fuels Elise K. Libby, John V. Seeley, Stacy K. Seeley Oakland University, Rochester, MI, USA James D. McCurry
More informationWarter Fuels JSC Aviation Gasoline AVGAS 100LL Edition VIII
1. Scope of TS 2. Usage scope of TS subject 3. Division and designation 4. Requirements and research 4.1. General properties 4.1.1. Antiknock additives 4.1.2. Dyeing additives 4.1.3. Antioxidant additives
More informationASTM D2887 Simulated Distillation Calibration Mixture Analysis Using a Differential Acceleration Column
ASTM D2887 Simulated Distillation Calibration Mixture Analysis Using a Differential Acceleration Column Cory S. Fix, Director of Application Development cory.fix@vgcchromatography.com Willie Steinecker,
More informationPERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS
METRIC 20 January 2012 SUPERSEDING MIL-PRF-7024E 1 October 1997 PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS Comments, suggestions, or questions on this document should
More informationएमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019
एमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक MRPL QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019 Page 1 of 15 BUREAU OF INDIAN STANDARDS (BIS) SPECIFICATION
More informationThe Eurasian Economic Community Customs Union Commission Decision of October 18, 2011 N 826
The Eurasian Economic Community Customs Union Commission Decision of October 18, 2011 N 826 THE ADOPTION OF TECHNICAL REGULATIONS OF THE CUSTOMS UNION "On requirements for automobile and aviation gasoline,
More informationModule8:Engine Fuels and Their Effects on Emissions Lecture 36:Hydrocarbon Fuels and Quality Requirements FUELS AND EFFECTS ON ENGINE EMISSIONS
FUELS AND EFFECTS ON ENGINE EMISSIONS The Lecture Contains: Transport Fuels and Quality Requirements Fuel Hydrocarbons and Other Components Paraffins Cycloparaffins Olefins Aromatics Alcohols and Ethers
More informationREBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST 51858-2002 Characteristics Units Result Test Method Density (Specific Gravity) @ 20 C g /sm 3 0.870 ASTM D5002 Sulphur Content wt.% 1.8 ASTM D4294
More informationDetermination of Free and Total Glycerin in Pure Biodiesel (B100) by GC in Compliance with EN 14105
Application Note: 10215 Determination of Free and Total Glycerin in Pure Biodiesel (B100) by GC in Compliance with EN 14105 Fausto Munari, Daniela Cavagnino, Andrea Cadoppi, Thermo Fisher Scientific, Milan,
More informationIROX 2000 IROX DIESEL
IROX 2000 IROX 2000 Portable Gasoline Analysis with MID-FTIR Features 9 Specific Oxygenates (ASTM D5845) 14 Specific Aromatics and Benzene (ASTM D6277, EN238) Total Aromatics, Oxygen, Olefins (incl. Di-Olefins)
More informationHydrocarbon standards for GC analysis 2016
Petroleum (hydrocarbons) EPA ASTM GC Gasoline Diesel Oxygenates Aromatics Aliphatics Petrochemical Hydrocarbon standards for GC analysis 2016 Petrochemical Gas Chromatography LGC Quality - ISO 9001 ISO/IEC
More informationHeartland Pipeline. Heartland Pipeline Company Product Specifications. Effective Date: 10/1/2015
Company Product Name Gasoline, Subgrade, 83 octane (87 after 0% ETOH addition) Destination(s) V Grade Gasoline, Conventional, 9 octane (no ethanol) A Grade Distillate, #2 Diesel Fuel / Fuel Oil, Ultra-Low
More informationSimulated Distillation Analyzers, Software, Standards, Consumables, Training
Simulated Distillation Analyzers, Software, Standards, Consumables, Training www.separationsystems.com Offering the Fullest Range of Optimized Solutions Simulated distillation (SimDis) has been used to
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB17930-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2013 Replacing
More informationPRICE LIST 2017/2018
PRECISION PETROLEUM LABS, INC. 5915 STAR LANE HOUSTON, TX 77057 PRICE LIST 2017/2018 PH: 713-680-9425 Fax: 713-680-9564* WEBSITE: PRECISIONLABS.ORG FUEL TESTING Acidity as Acetic Acid D-1613 $65.00 Alcohol
More informationCalibration & Verification Standards
- - Online: www.conostan.com Email: sales@scpscience.com Order Online at: www.scpscience.com NORTH AMERICA USA: 348 Route 11 Champlain, NY 12919-4816 CANADA: 21800 Clark Graham Avenue Baie D Urfé, QC H9X
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationBiodiesel Analysis Utilizing Mini-Scan - Handheld Analyzer V.C. Gordon PhD, Bonanza Labs
Biodiesel Analysis Utilizing Mini-Scan - Handheld Analyzer V.C. Gordon PhD, Bonanza Labs Overview According to the National Biodiesel Board, biodiesel production in the United States reached 450 million
More informationAnalysis and Chromatographic Separation of Oxygenates in Hydrocarbon Matrices
Analysis and Chromatographic Separation of Oxygenates in Hydrocarbon Matrices GC Application Chemist March 3rd, 2008 Pittcon 2008, New Orleans, LA Presentation Outline WCOT vs. PLOT columns OxyPLOT A highly
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing
More informationDr. Onkar S. Tyagi. Indian Institute of Petroleum Dehradun.
Dr. Onkar S. Tyagi Indian Institute of Petroleum Dehradun ostyagi@iip.res.in APEC Workshop on Establishment of the Guidelines for the Development of Biodiesel Standards in the APEC Region The Howard Plaza
More informationBiodiesel Fuel Quality
2012 Collective Biofuels Conference Temecula, California Biodiesel Fuel Quality August 17-19, 2012 Presented by Gorge Analytical, LLC Significant effort and technical consideration has gone in to developing
More informationEAST AFRICAN STANDARD. Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY. HS (regular); HS
EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY HS 2710.11.10(regular); HS 2710.11.10(premium) ICS 75.160.20 EAS 2011 Second Edition 2011 ii Table
More informationएमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY
एमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY PRODUCTS SPECIFICATIONS:2017 INDIAN STANDARD (IS) SPECIFICATIONS FOR DOMESTIC PRODUCTS: 2017 S.No Product Name Specification Number 1 Liquefied
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche
More informationPetrochemical standards
Conostan Oil Analysis Standards Petrochemical standards Reference standards for lubricant/oil analysis include: Element (metallo-organic) standards and associated blank oils and solvent (for ICP application),
More informationOptiFuel. solid partners proven solutions. Precision and portability in a top of the line FTIR Fuel Analyzer
solid partners proven solutions 10-year optics 2-year system WARRANTY 5-year light source OptiFuel Precision and portability in a top of the line FTIR Fuel Analyzer Superior performance and ruggedness
More informationPhillips Texas Pipeline Company, LTD. Amarillo-Lubbock Pipeline (SAAL) Product Specifications
Current Publication Date: 5/12/2016 Previous Publication Date: Revision Notes: First Revision Published 5/12/2016 Product Index Product Name Gasoline, Subgrade, 82.4 octane (86.3 after 10% ETOH addition)
More informationProdigy ICP Application Note: # 1039
Prodigy ICP Application Note: # 1039 The Determination of Trace elements in Biodiesel Fuel using Inductively Coupled Plasma Optical Emission Spectrometry Introduction It is generally accepted that the
More informationReliable. Efficient. Economical. Distillation Technology ENGINEERING - EQUIPMENT - TURNKEY SYSTEMS
TM Economical Efficient Reliable Distillation Technology ENGINEERING - EQUIPMENT - TURNKEY SYSTEMS DISTILLATION TECHNOLOGY Distillation is by far the most important separation process in the petroleum
More informationISO Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fifth edition 2012-08-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
More informationThe Analysis of Biodiesel for Inorganic Contaminants, including Sulfur, by ICP-OES
application Note Biofuels Authors Zoe A. Grosser, Ph.D. Lee J. Davidowski, Ph.D. Pamela Wee PerkinElmer, Inc. Bridgeport Avenue Shelton, CT USA The Analysis of Biodiesel for Inorganic Contaminants, including
More informationCOLOMBIA. 2. Vehicle categories: 2.1. Categories for application with European limits. M = Passenger vehicle N = Commercial vehicle
COLOMBIA COLOMBIA 1. Introduction: American and European emissions limits, with respective test cycles, are applied. There are no emissions laboratories in, because of this test reports carried out by
More informationएमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018. Page 1 of 17
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ २०१८ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018 Page 1 of 17 INDIAN STANDARD (IS) SPECIFICATION FOR DOMESTIC PRODUCTS: 2018 S. No Product Name Specification
More information