SCOPE OF ACCREDITATION
|
|
|
- Lawrence Hancock
- 5 years ago
- Views:
Transcription
1 Standards Council of Canada Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION InnoTech Alberta Inc. FUELS & LUBRICANTS GROUP 250 Karl Clark Road Edmonton, AB T6N 1E4 Accredited Laboratory No. 41 (Conforms with requirements of CAN-P-4E (ISO/IEC 17025:2005)) CONTACT: Julius Pretorius TEL: FAX: URL: CLIENTS SERVED: FIELDS OF TESTING: All interested parties. Chemical/Physical SCOPE ISSUED ON: ACCREDITATION VALID TO: NON METALLIC MINERALS AND PRODUCTS Petroleum Refinery Products: (Including asphalt materials; petrochemicals; fuels and lubricants) (Coolants, Additives and Solvents) Fuels and Lubricants (Fuels and Fuel Oils) (Lubricating and Insulating Oils, Greases) Standards Council of Canada 1
2 ASTM D1094 ASTM D1159 ASTM D1160 ASTM D130 ASTM D1319 ASTM D1322 ASTM D1796 ASTM D1840 ASTM D2274 ASTM D2386 ASTM D2500 ASTM D2624 ASTM D2699 ASTM D2700 ASTM D2709 ASTM D2887 ASTM D2892 ASTM D3227 ASTM D3231 ASTM D3241 ASTM D3242 ASTM D3341 Standard Test Method for Water Reaction of Aviation Fuels Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration Standard Test Method for Distillation of Petroleum Products at Reduced Pressure Standard Test Method for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) Standard Test Method for Freezing Point of Aviation Fuels Standard Test Method for Cloud Point of Petroleum Products Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column) Standard Test Method for Thiol (Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) Standard Test Method for Phosphorus in Gasoline Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) Standard Test Method for Acidity in Aviation Turbine Fuel Standard Test Method for Lead in Gasoline-Iodine Monochloride Method SCOPE OF ACCREDITATION 2
3 ASTM D381 ASTM D3828 ASTM D3831 ASTM D4007 ASTM D4052 ASTM D4176 ASTM D445 ASTM D4530 ASTM D482 ASTM D4870 ASTM D4928 ASTM D4952 ASTM D5001 ASTM D5002 ASTM D5006 ASTM D5191 ASTM D5236 ASTM D524 ASTM D525 ASTM D5291 ASTM D5452 ASTM D5453 Standard Test Method for Gum Content in Fuels by Jet Evaporation Standard Test Methods for Flash Point by Small Scale Closed Tester Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy Standard Test Method for Water and Sediment in Crude Oil by Centrifuge Method Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual) Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity) Standard Test Method for Determination of Carbon Residue (Micro Method) Standard Test Method for Ash from Petroleum Products Standard Test Method for Determination of Total Sediment in Residual Fuels Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test) Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-On-Cylinder Lubricity Evaluator (BOCLE) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method) Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence SCOPE OF ACCREDITATION 3
4 ASTM D56 ASTM D5773 ASTM D5949 ASTM D5972 ASTM D613 ASTM D6304 ASTM D6352 ASTM D6377 ASTM D6468 ASTM D6584 ASTM D664 ASTM D7039 ASTM D7042 ASTM D7111 ASTM D7169 ASTM D7224 ASTM D7501 ASTM D7688 ASTM D7900 Standard Test Method for Flash Point by Tag Closed Tester Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method) Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method) Standard Test Method for Cetane Number of Diesel Fuel Oil Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils and Additives by Coulometric Karl Fischer Titration Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700 C by Gas Chromatography Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR x (Expansion Method) Standard Test Method for High Temperature Stability of Distillate Fuels Standard Test Method for Free and Total Glycerin in B100 Biodiesel Methyl Esters by Gas Chromatography Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) Standard Test Method for Boiling Point Distribution of Samples with Residues such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer Standard Test Method for Determination of Fuels Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by visual Observation SCOPE OF ACCREDITATION 4
5 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography ASTM D8003 Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography ASTM D8045 Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration ASTM D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure ASTM D873 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method) ASTM D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives ASTM D893 Standard Test Method for Insolubles in Used Lubricating Oils ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup ASTM D93 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester ASTM D97 Standard Test Method for Pour Point of Petroleum Products ASTM D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration CAN/CGSB 3.0 No 14.3 Standard Test Method for the Identification of Hydrocarbon Components in Automotive Gasoline Using Gas Chromatography CAN/CGSB 3.0 No Method of Testing Petroleum and Associated Products - Low Temperature Flow Test (LTFT) for Diesel Fuels CAN/CGSB 3.0 No Method of Testing Petroleum and Associated Products - Determination of Lead in Automotive Gasoline (Atomic Absorption) CAN/CGSB No Cold Soak Filter Blocking Tendency of Biodiesel (B100) GL-71 Detection of Unisol Liquid Red Dye BK-50 IP 143 Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products IP 540 Determination of the Existent Gum Content of Aviation Turbine Fuel - Jet Evaporation Method IP 585 Determination of Fatty Acid Methyl Esters (FAME), Derived from Bio-Diesel Fuel, in Aviation Turbine Fuel - GC-MS with Selective Ion Monitoring/Scan Detection Method NACE TM0172 Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines Notes: SCOPE OF ACCREDITATION 5
6 CAN-P-4E (ISO/IEC 17025:2005): General Requirements for the Competence of Testing and Calibration Laboratories (ISO/IEC ) Chantal Guay, ing., P. Eng. Vice President, Accreditation Services Date: Number of Scope Listings: 82 SCC /65 Partner File #0 Partner: SCOPE OF ACCREDITATION 6
Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
Annex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
ALL TESTS. Density Oscillating U-tube method * IP 365. Distillation characteristics of petroleum products - Micro distillation method IP 596
Tests marked * are ISO17025 accredited ALL TESTS TEST NAME Density Oscillating U-tube * IP 365 Distillation characteristics of petroleum products - Micro distillation IP 596 Mercaptans, hydrogen sulphide,
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
Softening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer
Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification
Paragon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
10.6 Scope of Accreditation
Testing Laboratory Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration
International Quality Assurance Exchange Program Schedule. Fuel Month Number Type Dispatch Date Closing Date
Fuel 2018 Month Number Type Dispatch Date Closing Date January February March April May June July August September October November December M902 Motor Gasoline, Premium A372 Aviation Gasoline, 100LL D295
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18436-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.01.2018 to 28.10.2019 Holder of certificate: ISP
ISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that EPA National Vehicle and Fuel Emissions Laboratory
SOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911
GB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB17930-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2013 Replacing
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical
ISO Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fifth edition 2012-08-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ITS Testing Services (UK) Limited (Caleb Brett - Downstream) Caleb Brett House Unit A 734 London Road West Thurrock Grays Essex RM20 3NL Contact:
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB17930-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2016 Replacing
Coefficient of Friction of Lubricants D 5707 p. 69 Coking Value D 4715 p. 70 Cold Cranking Simulator Manual Method D 2602 p. 71 Automatic Method--see
Introduction p. 1 Explanation of Terms p. 2 Test Method Equivalence p. 3 Alphanumeric Index of Standards p. 5 Acid Number Colorimetric Titration--see also Base Number, p. 43 D 974 p. 11 Potentiometric
10.6 Schedule of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
10.6 Scope of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail:
Certificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Nordic Camp Supply Kabul (HKIA) Fuel Testing
Alberta Innovates - Technology Futures ~ Fuels & Lubricants
Report To: 5 Kings College Road Toronto, Ontario, M5S 3G8 Attention: Curtis Wan E-mail: curtis.wan@utoronto.ca Fax: Alberta Innovates - Technology Futures ~ Fuels & Lubricants 250 Karl Clark Road, Edmonton,
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1
Designation: D 6751 03a An American National Standard Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1 This standard is issued under the fixed designation D 6751;
DETAIL SPECIFICATION FUEL, NAVAL DISTILLATE. This specification is approved for use by all Departments and Agencies of the Department of Defense.
METRIC 14 August 2012 SUPERSEDING MIL-DTL-16884L 23 October 2006 DETAIL SPECIFICATION FUEL, NAVAL DISTILLATE This specification is approved for use by all Departments and Agencies of the Department of
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 031 Issue date: 21 ugust 2018 ccredited to Unit 7 Prince William Drive
ASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels
ASTM D 6751 02 Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels Summary This module describes the key elements in ASTM Specifications and Standard Test Methods ASTM Specification
Exceeding Expectations
Technical Notes # 028 Linear vs. Non-Linear that is the question Exceeding Expectations When blending, it is important to understand whether the specification you are blending for is linear or non-linear
ISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fourth edition 2010-06-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards
AMENDMENT OF SOLICITATION
DALLAS AREA RAPID TRANSIT DALLAS, TEXAS 1. SOLICITATION NO.: AMENDMENT OF SOLICITATION 2. AMENDMENT NO.: 3. EFFECTIVE DATE: 4. BRIEF SOLICITATION DESCRIPTION: B-1021874 1 05/30/12 NRV Fuel and Fuel Management
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1
Designation: D 6751 07a An American National Standard Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1 This standard is issued under the fixed designation D 6751;
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS
METRIC 20 January 2012 SUPERSEDING MIL-PRF-7024E 1 October 1997 PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS Comments, suggestions, or questions on this document should
Biodiesel Fuel Quality
2012 Collective Biofuels Conference Temecula, California Biodiesel Fuel Quality August 17-19, 2012 Presented by Gorge Analytical, LLC Significant effort and technical consideration has gone in to developing
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29808-1 SOUTH AFRICAN NATIONAL STANDARD Kerosene for domestic heating and illuminating WARNING This standard references other documents normatively. Published by SABS Standards Division
Savant Labs Laboratory Testing Services. Tests by Method
ASTM D86 Distillation 400 ml ASTM D92 Fire Point, Cleveland Open Cup 250 ml ASTM D92 Flash Point and Fire Point, Cleveland Open Cup 250 ml ASTM D92 Flash Point, Cleveland Open Cup 250 ml ASTM D93 Flash
DRAFT EAST AFRICAN STANDARD
ICS 75.160.20 DRAFT EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY EAC 2018 Third Edition 2018 Copyright notice This EAC document is copyright-protected
CONTENTS. Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6
vii CONTENTS Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6 Analysis Reference ASTM Standard ACID NUMBER by color indicator titration
Alcor Petrolab Company Test List March 14, 2018 Item Description Sample Volume-ML Sample Volume-G
A-A-59173A-00 A-A-59173A 3.8 (Solidification @ -55 C / -67 F) 100 A-A-59173A-01 A-A-59173A 3.1 (Visual Inspection) 100 AAR-M914-00 AAR M-914 2.3.2 (Freezing Point) 100 AAR-M914-01 AAR M-914 2.3.3 (Spreadability)
PRICE LIST 2017/2018
PRECISION PETROLEUM LABS, INC. 5915 STAR LANE HOUSTON, TX 77057 PRICE LIST 2017/2018 PH: 713-680-9425 Fax: 713-680-9564* WEBSITE: PRECISIONLABS.ORG FUEL TESTING Acidity as Acetic Acid D-1613 $65.00 Alcohol
ASTM D2007M/ASTM D2549M In-house method/astm D6560/D3279
ID Test Standard Amount Required Price for Cost Recovery Projects (Can $) 1 2 3 4 5 Sulfur compounds distribution by boiling point (GC-SCD) Sulfur compound speciation by GC-SCD Nitrogen compounds distribution
Corrosion in Underground Storage Tanks (USTs) Storing Diesel
Corrosion in Underground Storage Tanks (USTs) Storing Diesel Update on EPA 2016 Research on the Prevalence, Search for Predictive Factors, and Potential Impacts 2016 Report Update Target Release Date -
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche
On-Line Process Analyzers: Potential Uses and Applications
On-Line Process Analyzers: Potential Uses and Applications INTRODUCTION The purpose of this report is to provide ideas for application of Precision Scientific process analyzers in petroleum refineries.
ASTM Methods that are feasible with Metrohm instruments
ASTM Methods that are feasible with Metrohm instruments Automotive ASTM D5827-09 Standard test method for analysis of engine coolant for chloride and other anions by ion Biofuels a) Biodiesel ASTM D664-09
Corrosion in Underground Storage Tanks (USTs) Storing Diesel. Summary, Findings, and Impacts of EPA s July 2016 Research
Corrosion in Underground Storage Tanks (USTs) Storing Diesel Summary, Findings, and Impacts of EPA s July 2016 Research Why Research Corrosion in USTs Storing Diesel? Reports began around 2007 Internal
FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES. ooooooooooooooooooooo
ISSUED FOR COMMENTS ONLY oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES ooooooooooooooooooooo
Fundamentals of Petroleum Refining Refinery Products. Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna
Fundamentals of Petroleum Refining Refinery Products Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna 1 Refinery Products Composition There are specifications for over
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST 51858-2002 Characteristics Units Result Test Method Density (Specific Gravity) @ 20 C g /sm 3 0.870 ASTM D5002 Sulphur Content wt.% 1.8 ASTM D4294
Phillips Texas Pipeline Company, LTD. Amarillo-Lubbock Pipeline (SAAL) Product Specifications
Current Publication Date: 5/12/2016 Previous Publication Date: Revision Notes: First Revision Published 5/12/2016 Product Index Product Name Gasoline, Subgrade, 82.4 octane (86.3 after 10% ETOH addition)
EDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1
Designation: D6751 12 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1 This standard is issued under the fixed designation D6751; the number immediately following
Specifications Of Straight Run Naphtha for Exportation
Specifications Of Straight Run Naphtha for Exportation ASTM Specific Gravity @ 60/60 F 1298 160 0.690-0.730 Colour VISUAL Colourless R.V.P @ 100 F kg/cm2 max 323 69 0.07 Sulphur, Total %mass max 1266 107
DoD Fuel Specification Review. Jill M Bramer, US ARMY Presenting on behalf of TRIPOL 11 April 2017
DoD Fuel Specification Review Jill M Bramer, US ARMY Presenting on behalf of TRIPOL 11 April 2017 TRIPOL TRIPOL informally began in March 2003 at the recommendation of AFPET Technical Division Official
EAST AFRICAN STANDARD. Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY. HS (regular); HS
EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY HS 2710.11.10(regular); HS 2710.11.10(premium) ICS 75.160.20 EAS 2011 Second Edition 2011 ii Table
MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL
INCH-POUND MIL-DTL-83767C 24 September 2007 SUPERSEDING MIL-L-83767B 8 February 1980 MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL Reactivated after 24 September 2007 and may be used
DRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS DEAS 158 Third Edition 2019-mm-dd Automotive gasoline (premium motor spirit) Specification PUBLIC REVIEW DRAFT Reference number DUS DEAS 158: 2019 UNBS 2019 DUS DEAS 158: 2019
Aviation turbine fuel (Grades JET A and JET A-1)
Supersedes CAN/CGSB-3.23-2011 National Standard of Canada Aviation turbine fuel (Grades JET A and JET A-1) Canadian General Standards Board The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices
ISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Third edition 2005-11-01 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
Fuel Related Definitions
Fuel Related Definitions ASH The solid residue left when combustible material is thoroughly burned or is oxidized by chemical means. The ash content of a fuel is the non combustible residue found in the
Aviation turbine fuel (Military grades F-34, F-37 and F-44)
Supersedes CGSB-3.24-2012 CGSB Standard Aviation turbine fuel (Military grades F-34, F-37 and F-44) Canadian General Standards Board The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this
OIL AND GAS STANDARDS CATALOGUE AS AT 31 DECEMBER 2017
MINISTRY OF ENERGY AND MINERAL DEVELOPMENT UGANDA NATIONAL BUREAU OF STANDARDS OIL AND GAS STANDARDS CATALOGUE AS AT 31 DECEMBER 2017 UNBS 2017 Uganda National Bureau of Standards Plot 2-12 ByPass Link
360 INDEX. boiling point of gas oil components, 84 boiling range, 353 bunker fuels, 8 fuel No. 6 characteristics, 339 classification, 338
Index acidity/acid no., 351 additives aviation gasoline, 317 classification, 178 composition, 256 consumption, 182 diesel distribution, 180 diesel fuels, 179 diesel vehicle system, 181 fuels, 121, 351
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60296 Third edition 2003-11 Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear IEC 2003 Copyright - all rights reserved No
FREQUENTLY ASKED QUESTIONS (FAQs)
FREQUENTLY ASKED QUESTIONS (FAQs) What are the Petrochemicals? Any chemical derived from crude oil,crude products or natural gas. Where the petrochemicals are used? In the manufacture of Synthetic rubber,
ANNEX 2, REFERENCE FUELS
ANNEX 2, REFERENCE FUELS A.2.1. A.2.1.1. EUROPE, INDIA, SOUTH AFRICA Petrol (E5) Parameter Unit Limits (1) Test method Research octane number, RON 95.0 EN 25164 pren ISO 5164 Motor octane number, MON 85.0
Sweeny to Pasadena Pipeline
click on product information to go to associated specification Spec Ref. # 8301 Product Name Distillate, Jet A, High Sulfur (3000 ppm ) Destination(s) Colonial PL- Grade 54; Explorer PL- Code 51; 8302
FORLINE LTD. Global Energy Solutions Kenneth Pike, Suite 200B Greenville, Delaware, 19807, USA. 19 Kathleen Road, SW11 2JR, London, England
Greenville, Delaware, 9807, USA Gasoline Diesel Jet Fuel Motor Oil Crude Oil 9 Kathleen Road, SW 2JR, Company Overview Forline LTD is London, UK based integrated distributor and marketer of commodities.
ASTM Aviation (Turbine) Jet Fuel Sample ID: JF1211
ACID NUMBER D3242 Report result to the nearest 0.001 mg KOH/g Acidity BOCLE (LUBRICITY) D5001 Report result to nearest 0.01 mm Fully-automatic WEAR SCAR DIAMETER (WSD) Semi-automatic WEAR SCAN DIAMETER
The Eurasian Economic Community Customs Union Commission Decision of October 18, 2011 N 826
The Eurasian Economic Community Customs Union Commission Decision of October 18, 2011 N 826 THE ADOPTION OF TECHNICAL REGULATIONS OF THE CUSTOMS UNION "On requirements for automobile and aviation gasoline,
PETROLEUM LABORATORY TESTING AND OPERATIONS
* FM 10-67-2 Field Manual No. 10-67-2 HEADQUARTERS DEPARTMENT OF THE ARMY Washington, DC, 2 April 1997 PETROLEUM LABORATORY TESTING AND OPERATIONS Table of Contents Page PREFACE CHAPTER 1 I CHAPTER 2 I
National Oil Corporation Libyan Petroleum Institute. Crude oil assay Sarir crude oil
National Oil Corporation Libyan Petroleum Institute Crude oil assay Sarir crude oil Work Order No. LPI- 00344/10/IL02/2008 Client: National Oil Corporation Date of Issue: Dec., 2008 Prepared by: Industrial
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 DCG PARTNERSHIP 1, LTD. 4170 A South Main Pearland, TX 77581 Louis D Agostaro Phone: 281-648-1894 Ext. 201 REFERENCE MATERIAL PRODUCER Valid To: November 30,
DETAIL SPECIFICATION TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5
METRIC MIL-DTL-5624W 28 March 2016 SUPERSEDING MIL-DTL-5624V 11 July 2013 DETAIL SPECIFICATION TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 This specification is approved for use by all Departments and
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL. SINCE 1985 Quality Controlled Through Analysis
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL SINCE 1985 Client: Powertron LLC Requested By: Mr. Tony Sgarbi Sample: 10% PermaFrost + 90% Report
ANNEX 3 REFERENCE FUELS. Parameter Unit Limits (1) Test method Minimum Maximum Research octane number, RON
WLTP-2012-018 Annex 3 Draft Reference fuels 03.06.2012 ANNEX 3 REFERENCE FUELS The reference fuel specifications listed in this annex are those that are to be used for the WLTP Validation 2 exercise and
Sampling kits and test suites
Shell LubeAnalyst Sampling kits and test suites Oil sampling kits and test suites Basic K1 - Transport Monitors wear & contamination Basic Plus K1+ - Transport Determines optimum drain intervals Differentials,
Louis Dreyfus Claypool Holdings, LLC. Biodiesel Production Plant Claypool, Indiana
Louis Dreyfus Claypool Holdings, LLC Biodiesel Production Plant Claypool, Indiana Soybeans 163,000 Bu. = 48 Railcars = 172 Trucks Electricity 156,695 Kwh Natural Gas 3,049 Dth Claypool Inputs/Outputs Per
T. Jafari Behbahani, H. Talachi & M. Taymori
-,,,, STUDY OF LIQUID SOLVENT DEASPHALTING OF HEAVY RESIDUES T. Jafari Behbahani, H. Talachi & M. Taymori Research Institute of Petroleum Industry (RIPI), Tehran, Iran, jafarit@ripi.ir Abstract: In the
T. Jafari Behbahani, H. Talachi & M. Taymori
-,,,, STUDY OF LIQUID SOLVENT DEASPHALTING OF HEAVY RESIDUES T. Jafari Behbahani, H. Talachi & M. Taymori Research Institute of Petroleum Industry (RIPI), Tehran, Iran, jafarit@ripi.ir Abstract: In the
SOUTH AFRICAN NATIONAL STANDARD
ICS 75.160.20 ISBN 0-626-17621-2 SANS 465:2005 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Standard specification for denatured fuel ethanol for blending with gasolines for use as automotive spark-ignition
Supply of Services for Detailed OEB Crude Assay Analysis
Tender Number [9900009229] Supply of Services for Detailed OEB Crude Assay Analysis SCOPE OF WORK SCOPE OF WORK 1. Introduction Orpic is the brand name for Oman Oil Refineries and Petroleum Industries
Crude Assay Report. Crude Oil sample marked. Barrow Crude Oil. On Behalf Of. Chevron Australia Pty Ltd. Laboratory Supervisor. Crude Assay Chemist
Crude Assay Report on Crude Oil sample marked Barrow Crude Oil On Behalf Of Chevron Australia Pty Ltd. Reported by: Approved by: Michelle Fernandez Laboratory Supervisor Jhonas Fernandez Crude Assay Chemist
Corrosion in Underground Storage Tanks (USTs) Storing Ultra-Low Sulfur Diesel (ULSD):
Corrosion in Underground Storage Tanks (USTs) Storing Ultra-Low Sulfur Diesel (ULSD): EPA Research on Risks, Prevalence, Causes, and Next Steps Presented at the National Tanks Conference September 16,
National Oil Corporation Libyan Petroleum Institute. Crude Oil Assay Messla Crude Oil
National Oil Corporation Libyan Petroleum Institute Crude Oil Assay Messla Crude Oil Work Order No. LPI- 00344/08/IL02/2008 Client: National Oil Corporation Date of Issue: Nov., 2008 Prepared by: Industrial
Warter Fuels JSC Aviation Gasoline AVGAS 115/145 Edition II
1. Scope of TS 2. Usage scope of TS subject 3. Division and designation 4. Requirements and research 4.1. General properties 4.1.1. Antiknock additives 4.1.2. Dyeing additives 4.1.3. Antioxidant additives
DETAIL SPECIFICATION TURBINE FUEL, AVIATION, GRADES JP-4 and JP-5
METRIC 5 January 2004 SUPERSEDING MIL-DTL-5624T 18 September 1998 DETAIL SPECIFICATION TURBINE FUEL, AVIATION, GRADES JP-4 and JP-5 This specification is approved for use by all Departments and Agencies
Draft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
Fuel oils Specification
TANZANIA STANDARD CDC15 (4029)P3 (Rev. of TZS 673:2014) Fuel oils Specification 0 Foreword This Tanzania Standard was prepared under the direction of Petroleum and Petroleum Products Technical committee,
Warter Fuels JSC Aviation Gasoline AVGAS 100LL Edition VIII
1. Scope of TS 2. Usage scope of TS subject 3. Division and designation 4. Requirements and research 4.1. General properties 4.1.1. Antiknock additives 4.1.2. Dyeing additives 4.1.3. Antioxidant additives