MS/Standard insert arrangements
|
|
- Pierce Ellis
- 6 years ago
- Views:
Transcription
1 insert arrangements Insert Service Total Contact Size Arrangement Rating Contacts S-1 A S-2 A SL-3 A SL-4 A S-1 A S-2 A S-3 A S-4 D D S-1** A S-2 Inst A S-5 Inst S-6 Inst S-7 A S-9** A S-10 Inst S-11 Inst S-12 A S-13 A S-1 A * E S-3* B S-4* D * A S-8 A A A A A A A/Inst D D * D * B A Inst ** A A * A A * A * A * C Inst Inst ** A ** D 3 3 Insert Arrangement Service Rating Total Contacts A/Inst A/Inst D D D D D/A Inst * D/A A A A A A A A A A A A D/A A D ** A D * D * E * E * E * B * D A * E/A * D/A * D/A A A A D/A * D/A A D * D/A ** D D * D ** A * D/A 8 8 * Consult Amphenol, Sidney, NY for availability ** Inactive for new design Contact Size
2 insert arrangements Insert Service Total Contact Size Arrangement Rating Contacts A A A A A * D/A D * D D A * E Inst * Inst D/A D * E * E/D * D * E/D/A D D/A A A A A * A B/D/A * C/D/A/Inst * B/D/A A A D E/D * E * D A Inst./A D D D A D * E/D A Insert Arrangement Service Rating Total Contacts 32-22* A D A D A A A A A A A A D/A A A A A A * A D * D * D * D * A * D * A/D A * A * D * A * A * Consult Amphenol, Sidney, NY for availability ** Inactive for new design Contact Size
3 insert alternate positioning To avoid cross-plugging problems in applications requiring the use of more than one connector of the same size and arrangement, alternate rotations are available as indicated in the accompanying charts. As shown in the diagram below, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counter-clockwise the same number of degrees in respect to the normal shell key. The charts give the W, X, Y, Z positions for the alternate rotations available for the insert arrangements of the rear release MIL-C-5015 series of connectors. If an insert arrangement number is not given, then there is no available alternate rotation for that pattern. The following insert arrangements have the same alternate insert rotations for W, X, Y and Z, which are: Degrees W X Y Z Position W Position X Position Y Position Z View looking into front face of pin insert or rear of socket insert. Insert Degrees Arrangement W X Y Z 12S S S S S S S S Insert Degrees Arrangement W X Y Z Insert Degrees Arrangement W X Y Z
4 of 12S Rotation of 12S-3 Insert Arrangement 8S-1 10S-2 10SL-3 10SL-4 12S-1 12S-2 12S-3 Service Rating A A A*** A A A A Number of Contacts Contact Size Insert Arrangement 12S S-1** 14S S-5 14S-6 Service Rating D D A Inst. A Inst. Inst. Number of Contacts Contact Size of 14S Rotation of 14S-2 of 14S Rotation of 14S-1 Insert Arrangement 14S-7 14S-9** 14S-10 14S-11 14S-12 14S-13 Service Rating A A Inst. Inst. A A Number of Contacts Contact Size Insert Arrangement 16S * 16S-3* 16S-4* 16-7* 16S-8 Service Rating A E B D A A Number of Contacts Contact Size ** Inactive for new design *** Service rating Inst. Class K 14
5 Insert Arrangement Service Rating A A A A A B, C, F, G = A; Bal. = Inst. Number of Contacts Contact Size Insert Arrangement * 18-7* Service Rating D D D B A Inst. Number of Contacts Contact Size Insert Arrangement 18-10** * * 18-15* Service Rating A A A A A A Number of Contacts Contact Size of Rotation of 18-9 of 18-1 Insert Arrangement 18-16* ** 18-22** Service Rating C Inst. Inst. A D B, C, F, G = A; Bal. = Inst. Number of Contacts Contact Size ** Inactive for new design one alumel contact and one chromel contact A, C = Iron; B, D = Constantan 15
6 250 Rotation of 18-1 of Rotation of 18-5 Insert Arrangement Service Rating B, C, F, G = A; Bal. = Inst. D D D D A, B, G, H = D; C, D, E, F = A Number of Contacts Contact Size Insert Arrangement 20-8* 20-9* Service Rating Inst. H = D; Bal. = A A A A A Number of Contacts Contact Size Insert Arrangement Service Rating A A A A A A Number of Contacts Contact Size
7 260 Rotation of 20-7 Insert Arrangement ** 22-5 Service Rating A A, B, G, H = D; Bal. = A A D A D Number of Contacts Contact Size Insert Arrangement 22-6** 22-7* 22-9* 22-10* 22-11* 22-12* Service Rating D E E E B D Number of Contacts Contact Size Insert Arrangement * 22-17* 22-18* Service Rating A D = 3; Bal. = A A = D; Bal. = A C, D, E = A: Bal. = D A A Number of Contacts Contact Size ** Inactive for new design 17
8 260 Rotation of Rotation of 22-5 Insert Arrangement * Service Rating A H = D; Bal. = A J = D; Bal. = A A D Number of Contacts Contact Size Insert Arrangement 22-36* 24-1** * 24-5** Service Rating H = D; Bal. = A D D D A Number of Contacts Contact Size Insert Arrangement 24-6* Service Rating A, G, H = D; Bal. = A A A A A Number of Contacts Contact Size ** Inactive for new design 18
9 of 24-5 Insert Arrangement * * Service Rating A A, B, F, G = D; C, D, E = A D D D Number of Contacts Contact Size Rotation of 24-5 Insert Arrangement * * 28-1 Service Rating A E Inst. Inst. A, J, E = D; Bal. = A Number of Contacts Contact Size Insert Arrangement * 28-4* 28-5* 28-8* Service Rating D E G, P, S = E; Bal. = D D L, M = E; B = D; Bal. = A Number of Contacts Contact Size
10 Insert Arrangement Service Rating D G = D, Bal. = A A A Number of Contacts Contact Size of Insert Arrangement ** Service Rating A A A R = B; M, N, P = D; Bal. = A Number of Contacts Contact Size Insert Arrangement 28-18* 28-19* Service Rating M = C; G, H, J, K, L = D; A, B = A; Bal. = Inst. H, M = B; A, B = D; Bal. = A A A Number of Contacts Contact Size ** Inactive for new design 20
11 Insert Arrangement * 32-3* Service Rating D A = E; B, C, D, E = D E D Number of Contacts Contact Size Insert Arrangement Service Rating A A, B, h, j = Inst.; Bal. = A D D Number of Contacts Contact Size of Rotation of 32-1 Insert Arrangement * Service Rating D A D A = E, Bal. = D Number of Contacts Contact Size
12 260 Rotation of 32-6 Insert Arrangement * Service Rating A A D A Number of Contacts Contact Size Insert Arrangement Service Rating D A A A Number of Contacts Contact Size of Insert Arrangement Service Rating A A A A Number of Contacts Contact Size
13 110 Rotation of of Rotation of 36-7 Insert Arrangement Service Rating A M = D, Bal. = A A A Number of Contacts Contact Size of Rotation of 36-9 Insert Arrangement * Service Rating A A A A Number of Contacts Contact Size Insert Arrangement * 40-3* Service Rating D D D Number of Contacts Contact Size
14 Insert Arrangement 40-4* 40-5* 40-6* Service Rating D A D Number of Contacts Contact Size Insert Arrangement 40-7* * Service Rating P, Q, U, V, W, X = A; Bal. = D A A Number of Contacts Contact Size Insert Arrangement 40-11* 40-56* 40-62* Service Rating D A A Number of Contacts Contact Size
Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors
Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
Amphenol GT eries Reverse Bayonet Coupling Connectors 12-024-7 Ruggedized Connector eries for Rail/ass Transit and other Harsh Environments Amphenol Table of Contents age o. Amphenol GT eries Reversed
More informationAmphenol. Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors
Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors -2123 Date: 10-01-2004 FOR USE BY BOMBARDIER & BOMBARDIER S SUBCONTRACTORS Amphenol Table of Contents Page
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationTABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
More informationAmphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments
Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series
More informationAllen Electric Connector Sales, Inc. (AECS, Inc.)
Allen Electric Connector Sales, Inc. (AECS, Inc.) A Woman owned small business since 1996, AECS, Inc. offers military circular electric connectors, connector accessories, custom design connectors, custom
More informationMG RANGE CONTENTS. General Specification Shell Styles... 4, 5, 6. Ordering Information Connectors... 7
CONTENTS General Specification........ 3 Shell Styles..... 4, 5, 6 Ordering Information Connectors... 7 Ordering Information Protective Caps... 8 Ordering Information Square Gaskets... 8 Insert Configurations.
More informationHeavy Duty Cylindrical MIL-C QWLD
20 eavy uty ylindrical I--22992 QW mphenol eavy uty ylindrical onnectors I--22992, QW wall mount receptacle cable connecting plug box mount receptacle jam nut receptacle (wall mount) thru bulkhead receptacle
More informationAmphenol 67 and 165 Series Miniaturized Standard Connectors
Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol Table of Contents Page No. Amphenol 67 Series Minni E General Information, Design Characteristics, Customer Options.........................
More informationLMJ RANGE CONTENTS. Description and characteristics Shell Styles Ordering Information - Connectors... 7
CONTENTS Description and characteristics..... 3-4 Shell Styles... 5-6 Ordering Information - Connectors.... 7 Ordering Information - Crimp Tooling.... 8 Ordering Information Square Gaskets..... 8 Ordering
More informationAC Series. Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d. cinch.com
AC Series Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d cinch.com PRODUCT INDEX AC Series Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d Contents Nomenclature Guide 4 Product Data
More informationAmphenol /Pyle MIL-C Connectors
Amphenol /Pyle MIL-C-26500 Connectors MS-101-2 Miniature Cylindrical Connectors for Military and Aerospace Applications Amphenol Table of Contents Amphenol /Pyle MIL-C-26500 Miniature Cylindrical Connectors
More informationAmphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors
mphenol - everse ayonet oupling onnectors 12-027-1 he Industrial onnector for actory utomation, obotics, rocess ontrol and est & easurement quipment. mphenol able of ontents age o. mphenol - everse ayonet
More informationHOW TO DETERMINE TEMPERATURE BY MEASURING THE OUTPUT MILLIVOLTAGE OF A THERMOCOUPLE SHREVEPORT ENGINEERING DEPARTMENT DOCUMENT
Page 1 of 41 HOW TO DETERMINE TEMPERATURE BY MEASURING THE OUTPUT MILLIVOLTAGE OF A THERMOCOUPLE SHREVEPORT ENGINEERING DEPARTMENT DOCUMENT THERMOCOUPLE REFERENCE TABLES The N.I.S.T. (National Institute
More informationfailure, or a reduced service life of the wiring system.
digital TOrquE TOOl Torque Range: In-Lb = 15 ~ 300 In-Lb FT Lb = 1.25 ~ 25 FT Lb Kg-cm = 1.7 ~ 345 Kg-cm N m = 1.7 ~ 33N.M Higher Torque ratings to meet mechanical fastening requirements and the need for
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
mphenol eries everse ayonet oupling onnectors 12-024-8 uggedized onnector eries for ail/ass ransit and other arsh nvironments mphenol able of ontents age o. mphenol eries eversed ayonet oupling onnectors
More information891/2 Series. Description. Applications. Standards MIL-C 5015 G, class K NFL 54140
Applications Aircraft engines High temperature applications tandards IC 5015 G, class NF 54140 Description crew coupling High temperature connector for severe environment Fire resistant and fire wall High
More informationYUDO SINGLE VALVE NOZZLE SERIES III V E R. N O M N S V E N O
SINGLE VALVE III Instruction Manual YUDO SINGLE VALVE NOZZLE SERIES III V E R. N O. 0 2 0 9 M N S V E N O Greetings Thank you for using YUDO Single Valve III System. YUDO fabricated Single Valve III System
More informationAmphenol Industrial Reverse Bayonet AIB
AI Coercial and Military Applications Amphenol Industrial Reverse ayonet AI AI Series is basically a MILDTL5015 (MILC5015) connector, but with an improved coupling system. AI Series replaces the threaded
More informationPIECAL 520B & 521B Thermocouple Source Operating Instructions
PIECAL 520B & 521B Thermocouple Source Operating Instructions (Shown without optional boot) Product Description Easy to use With the PIECAL 520B/521B you can check & calibrate all your thermocouple instruments.
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationMINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR
MINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR Explosion protection Certificate of Conformity: Frame size 71 and 160 Frame size 80, 90, 100, 112, 132 Frame size 180, 200, 225 Frame size 250 Frame size 280
More informationPIECAL 322 Automated Thermocouple Calibrator Operating Instructions. Product Description
PIECAL 322 Automated Thermocouple Calibrator Operating Instructions Product Description Easy to use With the PIECAL 322-1 you can check & calibrate all your thermocouple instruments and measure thermocouple
More informationMS17340 N 12 A 1 FINISH AN EXAMPLE OF THE GOVERNMENT DESIGNATION WHICH IDENTIFIES THE COVER OR RECEPTACLE IS SHOWN B MS17343 C 20 FINISH SIZE -1-
QUALIFICATIONS VALIDATED EVERY 24 MONTHS 19-Jul-99 SUPERSEDING QPL-22992-40 31-Mar-98 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATI MIL-C-22992 CONNECTOR, PLUGS AND RECEPTACLES,
More informationDETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R
INCH-POUND MS24266P 7 August 2015 SUPERSEDING MS24266N 20 August 2009 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R Inactive for new design after 14
More informationAmphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock
Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock www.amphenolpcd.com.cn CONTENT HVBI PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE...... 3 alternate KEYING positions............
More informationSTYLE J COMBINATION PRESSURE AND TEMPERATURE REGULATOR
STYLE J COMBINATION PRESSURE AND TEMPERATURE REGULATOR MIL-V-19772A and MIL-DTL-19772B TYPE IV SERIES 100 (BRONZE) and 150 (STEEL) SUITABLE FOR SHIPBOARD SERVICE TRAC Regulator Company Inc. 160 South Terrace
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More informationModel 322 Automated Thermocouple Calibrator Operating Instructions. Product Description. Practical Instrument Electronics
Model 322 Automated Thermocouple Calibrator Operating Instructions Product Description Easy to use With the PIECAL 322 you can check & calibrate all your thermocouple instruments and measure thermocouple
More informationTemperature sensors: Make the right choice, RTD vs. TC
Temperature sensors: Make the right choice, RTD vs. TC When you need a temperature measurement, one of the most basic decisions is choosing which kind of sensor to deploy. The application should guide
More informationALS6A100 BACKUP DISPLAY PANEL Operations and Maintenance Manual
ALS6A100 BACKUP DISPLAY PANEL Operations and Maintenance Manual TABLE OF CONTENTS SECTION DESCRIPTION 1.0 GENERAL DESCRIPTION 2.0 OPERATING PROCEDURES 3.0 DESCRIPTION OF FEATURES 4.0 MENU SELECTIONS 5.0
More informationAmphenol GB- Series Plugs Miniature Bayonet Lock Connectors Complies with MIL-C CE-2Pa
62 GB- Series Plugs Miniature Bayonet Lock Connectors Complies with MIL-C-26482 CE-2Pa This miniature bayonet lock connector series offers designers important features not found in any other range of connectors.
More informationABCIRH. Connectors. Halogen Free Bayonet Lock Connector Series
Connectors Halogen Free Bayonet Lock Connector Series Company Profile TT Electronics brand AB Connectors specialises in the design, test and manufacture of high performance electronic connectors and interconnect
More informationQUALIFICATION TEST SUMMARY REPORT ESR Qualification Type Testing of Amphenol Corporation s 2M801 Series Connector
Page 1 of 13 QUALIFICATION TEST SUMMARY REPORT ESR-9389 Qualification Type Testing of Amphenol Corporation s Connector PREPARED BY: Patrick Cole Design Engineer AMPHENOL CORPORATION Aerospace Operation
More informationMolded & Mechanical Military Connectors (MIL-C-5015)
Cord sets & CONNECTOR ASSEMBLIES / connectors Molded & Mechanical (MIL-C-5015) Abrasion Chemicals Flexing MIL-C-5015 VG 95 234 NATO Specification Operating Temperature Range -55 C to 125 C TPC s Circular
More informationBRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
More informationModel 422 Automated Thermocouple Calibrator Operating Instructions. Product Description
Model 422 Automated Thermocouple Calibrator Operating Instructions Product Description Easy to use With the PIECAL 422 you can check & calibrate all your thermocouple instruments and measure thermocouple
More informationThermocouples. Thermocouple
Thermocouple Nimish Shah Thermocouples Most frequently used method to measure temperatures with an electrical output signal. Outline What Is A Thermocouple Sensor?? Basic Working Principle Practical Thermocouple
More informationDETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R
INCH-POUND MS24266R 1 December 2016 SUPERSEDING MS24266P 7 August 2015 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R Inactive for new design after
More informationAmphenol 62GB solder connectors
This catalogue to be used in conjunction with Catalogues: CE-2Pa 62GB Series Receptacles CE-2Aa 62GB Series Accessories Amphenol 62GB solder connectors This miniature bayonet lock connector series offers
More informationContents. Cable assemblies, Model 10.
Contents Cable assemblies, Model 10...33 Flying leads, Pigtails A11 Cable assemblies, Model 10 Main Characteristics Choice of connectors to interface with various sensor Choice of cable to suit various
More informationRADIAL ALUMINUM LOW PRESSURE
RADIAL ALUMINUM LOW PRESSURE Content LOW PRESSURE BLOWERS... 2 GENERAL... 3 D03M, E03... 4 D04M, E04... 5 D045M, E045... 6 D05M, E05... 7 D052M, E052... 8 D060, E060... 9 D064, E064... 10 D066, E066...
More informationASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR THERMOCOUPLE CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
More informationMIL-DTL-83723, Series III, Pyle
MIL-DTL-83723, Series III, TALE OF CONTENTS FOR SECTION Design Features, Customer Options, Specifications.... 8, 9 Quick Reference of Choices - Threaded Styles.... 20-22 Quick Reference of Choices - ayonet
More informationAmphenol MIL-DTL-83723, Series III, Pyle
Amphenol MIL-DTL-83723, Series III, Pyle TALE OF CONTENTS MIL-DTL-83723, Series III, Pyle : Design Features, Customer Options, Manufacturer s Specifications. 363, 364 Quick Reference of Choices - Threaded
More informationVG95234 Qualified Bayonet-Lock Connectors
Qualified Bayonet-Lock Crimp-Contact MIL-DTL-5015 Type Electrical for Ruggedized Power and Signal Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical
More informationGeneral Purpose Relay
General Purpose Relay KML 15A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 to 3 pole configurations 1. COIL DATA (at 23 ) 1)
More informationHV HV Series Connector and cable assembly
Amphenol Amphenol PCD Shenzhen HV HV Series Connector and cable assembly www.amphenolpcd.com.cn CONTENT HV Series connector and cable assembly PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE.........
More informationMO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
More informationSCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
More informationCannon VG/CA-Bayonet. How to order VG Order reference. How to order Cannon Order reference. Explanation
How to order VG Order reference Series Shell style Dash Shell size Contact arrangement Contact type Contact termination Insulator position Explanation Series Shell style VG95234 A 32 6 S 1 N VG95234 J1,
More informationHeat Exchanger Design
CH2407 Process Equipment Design II Heat Exchanger Design Dr. M. Subramanian Associate Professor Department of Chemical Engineering Sri Sivasubramaniya Nadar College of Engineering Kalavakkam 603 110, Kanchipuram
More informationFeatures/Benefits. Typical Applications
Features/Benefits Compliant with ESA/ESCC specification Solderable PCB terminations Available with or without brackets High density layouts Typical Applications Space equipments Avionics / Military Industrials
More informationUT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series. A full range of double acting and spring return actuators designed
UT-**-DA Series UT-**-SR Series A full range of double acting and spring return actuators designed to NAMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual
More informationFeatures and Application
ML-DTL- Features and Application MS2426*/AE66* Features and Application ML-DTL- family offers connectors with bayonet coupling as well as threaded coupling. These connectors are intermateable with correspondingly
More informationExcel Mate Mono High Voltage with Inter-Lock
Amphenol Amphenol PCD Shenzhen Excel Mate Mono High Voltage with Inter-Lock AMPHENOL PCD SHENZHEN www.amphenolpcd.com.cn CONTENT ExcelMate Mono (HVBI) PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE......
More informationMIL-DTL-83723, Series III, Pyle
TALE OF CONTENTS Table of Contents....................... 37 Design Features, Customer Options, Manufacturer s Specifications. 38, 39 Quick Reference of Choices - Threaded Styles......... 40-42 Quick Reference
More informationInstallation Instructions Lockey TB 250/450/650 Plus Hydraulic Pedestrian Gate Closer (with hydraulically adjustable closing speed)
Installation Instructions Lockey TB 250/450/650 Plus Hydraulic Pedestrian Gate Closer (with hydraulically adjustable closing speed) The Lockey TB 250/450/650 Plus Pedestrian Gate Closer is a fully featured
More informationAMS 3K COMBINED DEPTH/TENSION MEASUREMENT DEVICE
AMS 3K COMBINED DEPTH/TENSION MEASUREMENT DEVICE CONTENTS 1.0 GENERAL 2.0 SYSTEM DESCRIPTION 3.0 OPERATION 4.0 MAINTENANCE 5.0 SPARE PARTS 6.0 DRAWINGS Kerr Measurement Systems Page 1 of 13 Rev C July
More informationMINING ELECTRIC MOTORS 3KTCR AND 4KTCR
MINING ELECTRIC MOTORS 3KTCR AND 4KTCR Explosion protection Certificate of Conformity: Frame size 71 and 160 Frame size 80, 90, 100, 112, 132 Frame size 180, 200, 225 Frame size 250 Frame size 280 Frame
More informationSUPPLEMENTAL INFORMATION SHEET FOR QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
SUPPLEMENTAL INFORMATION SHEET FOR QPL 50151 QUALIFICATIONS HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING QPL-50151-18 6 May 2014 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS
More informationMIL-DTL Series 1 Solder Type PT
MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks
TITAN pt. no.: 02 0000 0143 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationMBE 900 and MBE 4000 EGR Cooler Leak Tester
TO: FROM: SUBJECT: Service Locations Technical Support Development MBE 900 and MBE 4000 EGR Cooler Leak Tester No.: 06 TL 03rev September 20, 2006 ISSUE Detroit Diesel has released an EGR cooler test kit
More informationMULTIPLE PASS AND CROSS FLOW HEAT EXCHANGERS
MULTIPLE PASS AND CROSS FLOW HEAT Introduction EXCHANGERS In order to increase the surface area for convection relative to the fluid volume, it is common to design for multiple tubes within a single heat
More informationModels Affected: Certain 2014 Model Year Vision Buses Equipped with Ford 6.8L Propane Engines ISSUE
R E C A L L C A M P A I G N ----R 1 3 W G -- Adjustment Inspection ISSUE CORRECTIVE ACTION ---- Models Affected: Certain 2014 Model Year Vision Buses Equipped with Ford 6.8L Propane Engines On affected
More informationAC AD AE
Registration Table JEITA ED-7716 Socket Name Object Package Registration No. Terminal pitch E x D 0.80 6.00 8.00 Package 48-001-AC 48-001-AD 48-001-AE Socket 48-001-AC 48-001-AD 48-001-AE 6.00 10.00 32-001-BA
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0143 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationCylinder Maintenance & Repair Instructions
Cylinder Maintenance & Repair Instructions PENINSULAR CYLINDER CO. Model HP High Pressure Hydraulic Cylinders Proximity Switch & Non Proximity Switch Designs - High Pressure NFPA Hydraulic Cylinder ( 5,000
More informationDEPARTMENT OF DEFENSE INTERFACE STANDARD
INCH-POUND MIL-STD-1560C 23 January 2017 SUPERSEDING MIL-STD-1560C 11 February 2015 DEPARTMENT OF DEFENSE INTERFACE STANDARD INSERT ARRANGEMENTS FOR MIL-DTL-38999, MIL-DTL-27599, AND SAE-AS29600 SERIES
More informationSMN Double-Suction Axially Split Pump
SMN Double-Suction xially Split Pump motralec 4 rue Lavoisier. Z Lavoisier. 95223 HERBLY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com
More informationAmphenol Industrial Threaded AIT
mphenol Industrial Threaded IT IT Series is a low cost, MILDTL5015 threaded type connector for use in harsh environmental conditions. This popular, cylindrical connector is particularly well suited to
More informationCircular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories
ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors
More informationED 100, ED 250 ESR. Mounting instructions
Mounting instructions These instructions may only be used in conjunction with the mounting instructions for the ED 100/ED 250 (WN 057698-45532). Especially the safety instructions on page 3 of the ED 100/ED
More informationTHD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs
CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and
More informationMS C O N N E C T O R S MS-6/898
MS-6/898 MS CONNECTORS MS Connectors Contents General Information... 2 Contact Arrangements... 5 Wall Mounting Receptacles... 12 Cable Connecting Plugs...13 Box Mounting Receptacles... 14 Straight Plug...
More informationLOCOLOC #3-H HYDRAULIC HANDSWAGER #3-K (kit shown)
LOCOLOC #3-H HYDRAULIC HANDSWAGER #3-K (kit shown) OPERATING INSTRUCTION MANUAL WARNING Read instruction manual before use. Wear safety goggles and protective gear. Do not use on electrical circuits. Keep
More informationMIL-DTL-83723, Series III, Matrix
MIL-DTL-, Series III, TBLE OF CONTENTS FOR SECTION MIL-DTL-, SERIES III, MTRIX Wide Variety of Coupling Styles & Options... Class Descriptions, Performance Specifications, Quick Reference Chart.... Insert
More informationNote: Replace the washer and the spacer above the turgo or the shaft adapter with the spacer above the washer as shown in the following pictures.
BEARINGS, SERVICE & ASSEMBLY IMPORTANT Bearing maintenance is important. You should replace bearings ONCE PER YEAR or as soon as you notice any looseness from wear. If they are too loose, severe damage
More informationINSTALLING THE DRUM MOTOR:
Drum Motor Installation Manual www.vandergraaf.com 2 Van der Graaf Court, Tel: 905-793-8100 Fax: 905-793-8129 Brampton, ON L6T 5R6 Canada Technical Support: 1 888-326-1476 INSTALLING THE DRUM MOTOR: The
More informationMODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
More informationELECTRIC CHAIN HOIST ED SERIES
EFFECTIVE: October 8, 2014 ELECTRIC CHAIN HOIST ED SERIES 125 through 525 Lb. Capacity Code, Lot and Serial Number This equipment should not be installed, operated or maintained by any person who has not
More informationBRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING
BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING DOT AIR BRAKE FITTINGS - COPPER TUBING DOT PUSH LOCK FITTINGS - NYLON TUBING DOT COMPOSITE
More informationPNEUMATIC QUARTER TURN RACK & PINION ACTUATOR MODEL - HP
FEATURES AND BENEFITS Aluminium body, hard anodized, internally polished to 45-50µ and Nickel plated to protect against wear and corrosion Open/Closed indicator is standard on all models Travel adjustment
More informationElectromechanical products Poulibloc. General information
Poulibloc General information Poulibloc geared motors with parallel gears are used to adapt the speed of the electric motor to that of the driven machine. Their size is therefore determined by the motor
More informationTemperature Sensing MI Cable Thermocouple Assemblies. Series TCM Multipoint Thermocouple Assemblies. View Product
Series TCM Multipoint Thermocouple Assemblies Multipoint Thermocouples are used in a broad range of processes and installations to monitor the temperature in multiple positions or elevations. These sensors
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS
TITAN pt. no.: 03 0000 0141 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS Extended Capacity Replacement
More informationIndustrial Relay KML(1C, 2C)
Industrial Relay KML(1C, 2C) Features 1C: 15A, 2C: 10A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 & 2 poles configurations
More informationHALL EFFECT ACTIVE SPEED SENSOR FOR 3 PHASE TRACTION MOTOR TYPES 6FRA6068 & 6FXA7059 FED FROM GTO CONVERTER USER MANUAL. Release V.1.0.
HALL EFFECT ACTIVE SPEED SENSOR FOR 3 PHASE TRACTION MOTOR TYPES 6FRA6068 & 6FXA7059 FED FROM GTO CONVERTER USER MANUAL Release V.1.0 June 01, 2013 ADVANCED RAIL CONTROLS PRIVATE LIMITED #59/1-2, 1&2FLOOR
More informationLotus Service Notes Section MVc
Lotus Service Notes MVc - CIRCUIT DIAGRAMS Exige Sport 350 models from '16my start of production For '12my - '16my exige s models refer to separate section mva for manual or mvb for automatic transmission
More informationAmphenol Amphenol PCD Shenzhen. Xcel Power Mate TM.
Amphenol Amphenol PCD Shenzhen Xcel Power Mate TM www.amphenolpcd.com.cn PRODUCT PROFILE Xcel Power Mate TM Auto-latch mating mechanism provides fast and reliable connection with audible and tactile feedback
More informationTBV OPERATION AND MAINTENANCE MANUAL SERIES 1800: FLANGED BALL VALVE. For technical questions, please contact the following:
TBV OPERATION AND MAINTENANCE MANUAL SERIES 1800: FLANGED BALL VALVE For technical questions, please contact the following: Engineering Department 1537 Grafton Road Millbury, MA 01527 Phone: (508) 887-9400
More informationLIFTING DEVICE, duplex filter / in-line filter Series AHV
Series AHV Page 1/6 The lifting devices are intended for the maintenance of filters with blind fange filter lids. They are required, if on the site of the filter no other hoisting devices are available
More informationadvanced FLOW engineering Instruction Manual P/N: & Make: Ford Model: F-150 Year: Transmission: 6R80
advanced FLOW engineering Instruction Manual P/N: 46-70170 & 46-70172 Make: Ford Model: F-150 Year: 2009-2015 Transmission: 6R80 Please read the entire instruction manual before proceeding. Ensure all
More informationLotus Service Notes Section MVd
Lotus Service Notes MVd - CIRCUIT DIAGRAMS EXIGE SPORT 380 MODELS FROM '17MY START OF PRODUCTION FOR '12MY - '16MY EXIGE S MODELS REFER TO SEPARATE SECTION MVa FOR MANUAL OR MVb FOR AUTOMATIC TRANSMISSION
More informationOrder No. of the options EMC filter Class A
Ordering Data for Variant Dependent Options The options listed here (filters, chokes, brake resistors, gland plates, fuses and circuit breakers) are inverter specific. The inverter and the associated options
More informationExtended Capacity Replacement Tanks for RAM Cummins Diesel Trucks
TITAN pt. no.: 03 0000 0135 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationThe Standard Mounting Arrangements for S&C Alduti-Rupter Switches
S&C Alduti-Rupter Switches Outdoor Distribution (14.4 kv through 69 kv) The Standard Mounting Arrangements for S&C Alduti-Rupter Switches Three-pole S&C Alduti-Rupter Switches for outdoor distribution
More informationTopside / Shipboard Environmental Connectors
Seacrow Marine Bronze IPT-MB marine bronze connectors ipt-mb mil-c-26482 bayonet type / V95328 Compliant Marine Bronze Series IPT-MB connectors are the choice for reliability when 20-16 AW signal cables
More information