HOSE - METALLIC & PTFE

Transcription

1 HOSE METALLIC & PTFE SanFlon Convoluted & Smooth Bore PTFE Hose & Hose Assemblies The SanFlon range of smooth and convoluted PTFE hose and hose assemblies are available from 1 /4 inch through to 1 inch and 3 /8 inch to 4 inch respectively. A range of outer coverings including glass fibre and polymer braid are available. Bounce Ring Protectors and Spiral uards can be fitted. Assemblies are available with a wide range of end fittings. All hoses are tested psi air under water and can be supplied with a wide range of certification if required. This must be specified at the time of enquiry or order. We can also make your specialist requirements such as heat traced and duplex assemblies. Standard End Connections PTFE SWAED MALE PTFE LINED FLANE PTFE LINED CAM & ROOVE PTFE SWAED FEMALE PTFE HIENIC FITTINS SANFLON STAINLESS STEEL OVERED CONVOLUTED PTFE HOSE SIZE INTERNAL DIAMETER WALL OUTSIDE DIAMETER MINIMUM MAIMUM MAIMUM DESCRIPTION MINIMUM MAIMUM THICKNESS MINIMUM MAIMUM BE RADIUS WORKIN BURST PRESSURE PRESSURE (inch) (inch) (inch) (inch) (inch) (inch) (bar) (psi) (bar) (psi) 3 /8 ASSEMBL /2 ASSEMBL /8 ASSEMBL /4 ASSEMBL /8 ASSEMBL ASSEMBL Note: Pressure ratings for polymer braid on application SANFLON STAINLESS STEEL OVERED SMOOTH BORE PTFE HOSE SIZE INTERNAL DIAMETER WALL OUTSIDE DIAMETER MINIMUM MAIMUM MAIMUM DESCRIPTION MINIMUM MAIMUM THICKNESS MINIMUM MAIMUM BE RADIUS WORKIN BURST PRESSURE PRESSURE (inch) (inch) (inch) (inch) (inch) (inch) (bar) (psi) (bar) (psi) 1 /4 ASSEMBL /1 ASSEMBL /8 ASSEMBL / ASSEMBL /2 ASSEMBL Note: Pressure ratings for polymer braid on application LARER BORE SIZES AVAILABLE FOR INSTALLATION & SAFET UIDELINES REFER TO THE TECHNICAL SECTION 4 Telephone: +44 (0) Fax: +44 (0)

2 HOSE METALLIC & PTFE Adflex Corrugated flexible metal hose assembly meeting the requirements of class 1 of the EN ISO 3 standard Corrugated hose: AISI: 1 DIN: 1.41 EN: Cr Ni Ti 18 AISI: 31L DIN: 1.44 EN: 2 Cr Ni Mo 172 Braid: AISI: 304 DIN: 1.31 EN: 5 Cr Ni 18 ADFLE FLEIBLE METALLIC HOSE NOM. DIA. NOMINAL DN STAT PED CATEOR: CAT 1 CAT 2 O.D (BAR) BE BE ACCORDIN TO PRESSURE (Bar) MIN. RAD. RAD. (approx) (approx) LD L TO (0. in) TO (0.31 in) TO (0. in) TO (0.0 in) TO.4.0 (0.3 in) TO.7.0 (0.75 in) TO (1 in) TO (1. in) TO (1. in) TO (2.00 in) TO (2. in) TO (3.00 in) TO (4.00 in) //EC = Dangerous as LD = Dangerous Liquid = Non Dangerous as L = Non Dangerous Liquid Requirements related to the PED, according to Pr EN 1 PS 0.5 b not subject to Subject to, and meeting the requirements of the EN ISO 3 standard Determination of the PED category: Do not take the working temperature into account. calculation: refer to the derating factors of the EN ISO 3 standard FOR INSTALLATION & SAFET UIDELINES REFER TO THE TECHNICAL SECTION Telephone: +44 (0) Fax: +44 (0)

3 HOSE METALLIC & PTFE Suparflex Parnor corrugated flexible metal hose assembly with close pitch annular corrugations, obtained by hydroforming Flexible hose meeting the requirement of the class 1 of the ENISO3 standard Corrugated hose: AISI: 31L DIN: 1.44 EN: 2 Cr Ni Mo 172 AISI: 1 DIN: 1.41 EN: Cr Ni Ti 18 Braid: AISI: 304 DIN: 1.31 EN: 5 Cr Ni 18 SUPARFLE FLEIBLE METALLIC HOSE (0.in) (1.in) 5 (2.5in) (3in) 0 1 (5in) (in) PED CATEOR: CA CA LD PS 8 PS 8 PS. PS. L Dangerous as LD Dangerous Liquid Non dangerous as L Non Dangerous Liquid Requirements related to the PED, according to Pr EN 1. PS 0.5 b Not subject to Subject to, and meeting the requirements of the EN ISO 3 std Determination of the PED category: Do not take the working temperature into account. calculation: refer to the derating factors of the EN ISO 3 standard FOR INSTALLATION & SAFET UIDELINES REFER TO THE TECHNICAL SECTION Telephone: +44 (0) Fax: +44 (0)

4 HOSE METALLIC & PTFE Hyparflex Parrap corrugated flexible metal hose assembly with close pitch annular corrugations, obtained by hydroforming Flexible hose meeting the requirement of the class 1 of the ENISO3 standard Corrugated hose: AISI: 31L DIN: 1.44 EN: 2 Cr Ni Mo 172 AISI: 1 DIN: 1.41 EN: Cr Ni Ti 18 Braid: AISI: 304 DIN: EN: 5 Cr Ni 18 (0.in) (1.in) 5 (2.5in) (3in) 0 1 (5in) (in) HPARFLE FLEIBLE METALLIC HOSE PED CATEOR: CA CA LD PS 8 PS 8 PS. PS. L Dangerous as LD Dangerous Liquid Non dangerous as L Non Dangerous Liquid Requirements related to the PED, according to Pr EN 1. PS 0.5 b Not subject to Subject to, and meeting the requirements of the EN ISO 3 std Determination of the PED category: Do not take the working temperature into account calculation: refer to the derating factors of the EN ISO 3 standard FOR INSTALLATION & SAFET UIDELINES REFER TO THE TECHNICAL SECTION Telephone: +44 (0) Fax: +44 (0)

5 HOSE METALLIC & PTFE HP / THP Corrugated flexible hose assembly, high pressure (HP1 Braid) and very high pressure (TH2 Braids) with close pitch annular corrugations, obtained by hydroforming. Flexible hose meeting the requirement of the class 1 of the ENISO3 standard Corrugated hose: AISI: 31L DIN: 1.44 EN: 2 Cr Ni Mo 172 AISI: 1 DIN: 1.41 EN: Cr Ni Ti 18 Braid: AISI: 304 DIN: 1.31 EN: 5 Cr Ni 18 HP/THP FLEIBLE METALLIC HOSE PED CATEOR: CA CA (0.in) (1.in) PS 2.5 PS 2.5 PS 2.5 PS 2.5 PS PS PS PS PS PS PS PS Dangerous as LD Dangerous Liquid Non dangerous as L Non Dangerous Liquid Requirements related to the PED, according to Pr EN 1. PS 0.5 b Not subject to Subject to, and meeting the requirements of the EN ISO 3 std Determination of the PED category: Do not take the working temperature into account calculation: refer to the derating factors of the EN ISO 3 standard FOR INSTALLATION & SAFET UIDELINES REFER TO THE TECHNICAL SECTION 1 Telephone: +44 (0) Fax: +44 (0)