SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
|
|
- Moris Hall
- 5 years ago
- Views:
Transcription
1 and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting of two support rings with replaceable orifice disk form A or B (see types of primary differential pressure devices in "Technical description", "Function"); flanged between inlet and outlet pipe sections with lengths according to DIN Nominal diameters EN: DN 10 to DN 50 ASME: ½ inch to 2 inch Nominal pressure EN: PN 10 to PN 100 ASME: class 150 to 600 Sealing face of the end flanges Plane, sealing face turned, N10/N12 to DIN ISO 1302, for soft gasket (PN 10 to PN 0) Plane, sealing face turned, N8 to DIN ISO 1302, for grooved gasket to DIN 2697 (PN 63 to PN 100) Plane, RF (raised faced) for versions to ASME Tapping sockets straight or bent With connection thread G½ DIN ISO 228/1, for connection dimensions to DIN form V, see page /351 With threaded connection ½-1 NPT male, for version to ASME With ferrule for pipe Ø 12 mm, S series With welding connection Ø 21.3 mm For length of tapping sockets for all metering pipe L = 120 mm and position of tapping socket, see "Technical Description" and "Function". Technical specifications Permissible operating temperature C Pipes made of P235G1TH, Mat. No , ST37., Mat. No or P235GH, Mat. No Tapping sockets made of P235G1TH, Mat. No Flanges made of P250GH, Mat. No Support rings made of P250GH, Mat. No Orifice disk made of X 6 CrNiMoTi , Mat. No /369
2 and annular chambers Dimensional drawings Nominal diameter acc. to EN DN PN a b k Pipe 1) D a x s Weight kg and and and and and and and x x x x x x 3.6 or 50 x 5 Metering pipes with orifice plates and annular chambers for installation between EN flanges to EN , dimensions in mm and weights 1) The stated pipe dimensions may vary, depending on availability. The pipe dimensions used can be found in the calculation for primary differential pressure devices and/or in the order confirmation. Nom. diameter PN a b k Pipe 1) D a x s Weight kg ½ inch Class 150 ¾ inch Class inch Class / inch Class /2 inch Class inch Class Metering pipes with orifice plates and annular chambers for installation between ASME flanges to ASME B 16.5, dimensions in mm and weights 1) The stated pipe dimensions may vary, depending on availability. The pipe dimensions used can be found in the calculation for primary differential pressure devices and/or in the order confirmation x x x x x x 3.6 or 50 x x /370
3 and annular chambers Selection and ordering data Metering pipe for mounting Orifice plate with annular chambers mounted permissible operating temperature -10 to +00 C, Orifice disk made of Mat. No , support rings and flanges made of Mat. No. 1060, pipes and tapping sockets made of Mat. No , or Sealing faces to the mating flanges: plane, with recess or with groove. Order No. 7 M E Z Nominal diameter acc. to EN DN 10 PN 10 and PN 16 1AC 3 2 PN 25 and PN 0 1AE 3 2 PN 63 1AF 3 2 PN 100 1AG3 2 DN 15 PN 10 and PN 16 1BC 3 2 PN 25 and PN 0 1BE 3 2 PN 63 1BF 3 2 PN 100 1BG3 2 DN 20 PN 10 and PN 16 1CC 3 2 PN 25 and PN 0 1CE 3 2 DN 25 PN 10 and PN 16 1DC 3 2 PN 25 and PN 0 1DE 3 2 PN 63 1DF 3 2 PN 100 1DG3 2 DN 32 PN 10 and PN 16 1EC3 2 PN 25 and PN 0 1EE3 2 DN 0 PN 10 and PN 16 1FC3 2 PN 25 and PN 0 1FE3 2 PN 63 1FF3 2 PN 100 1FG3 2 DN 50 PN 10 and PN 16 1GC 3 2 PN 25 and PN 0 1GE 3 2 PN 63 1GF 3 2 PN 100 1GG3 2 ½ inch Class 150 5BA 3 2 5BB 3 2 5BC 3 2 ¾ inch Class 150 5CA 3 2 5CB 3 2 5CC inch Class 150 5DA 3 2 5DB 3 2 5DC 3 2 1¼ inch Class 150 5EA3 2 5EB3 2 5EC3 2 Selection and ordering data Order No. Metering pipe for mounting 7 M E Z 1½ inch Class 150 5FA3 2 5FB3 2 5FC3 2 2 inch Class 150 5GA 3 2 5GB 3 2 5GC 3 2 Tapping sockets With threaded connection G½; for liquids and gases PN, - Opposite one another, straight 1 A 1 B - Arranged on one side, 1 C for horizontal pipelines With threaded connection ½-1 NPT male; for liquids and gases PN, - Opposite one another, straight 1 Q 1 R - Arranged on one side, 1 S for horizontal pipelines With ferrule for pipe Ø 12 mm, S series, max. 200 C permissible - Opposite one another, straight 1 J 1 K - Arranged on one side, 1 L for horizontal pipelines With welding connection 21.3 mm; for liquids and gases PN 100 to PN 00 - Opposite one another, straight 1 D 1 E - Arranged on one side, 1 F for horizontal pipelines Shape of orifice disk aperture (see figure "Shapes of orifice disk aperture") Orifice plate form A A Quarter-circle nozzle form B B Manufactured according to pressure equipment directive (see "Questionnaire" (page /356)) Without² ) 0 According to Article 3, 1 Paragraph 3 According to category 1 2 According to category 2 3 /371
4 and annular chambers Selection and ordering data Order No. Metering pipe for mounting 7 M E Z Further designs Order code 1) Add "-Z" to Order No. and specify Order code(s) and plain text. Calculation of orifice disk A11 aperture Add calculation sheet "Questionnaire for calculation of a primary differential pressure device acc. to DIN EN ISO 5167" to the order! Orifice plate without calculation Y01 Specify in plain text: Diameter of orifice disk aperture d =... mm Internal diameter of pipe D =... mm Radius of quarter-circle nozzle r =... mm Material certificate C02 Acceptance test certificate to EN Other materials On request Additional nominal diameters On request and nominal pressure stages according to EN and ASME Cold water pressure test On request 1.5 x PN, acceptance test certificate to EN 1020 Sealing face of metering pipe On request with orifice plate, with recess or groove Metering pipes for corrosive On request media Note on ordering Enclose a filled-out calculation sheet "Questionnaire for calculation of a primary differential pressure device according to DIN EN ISO 5167" with the order (necessary for device selection)! Scope of delivery: Orifice plate comprised of two support rings with tapping sockets and an orifice disk; flanged between inlet and outlet pipe section, with gaskets between orifice plate and support ring and between support rings and flanges of the inlet and outlet pipes, including screws and nuts. Graphite (99.85 %) flat gasket with foil insert (1.01, 0.1 mm). application for liquids, steam, gases, liquid gases, acids, hydrocarbons, oils and oil products. Accessories: See "SITRANS P measuring instruments for pressure". 1) Order codes additive, any sequence. 2) Option only available outside Europe (manufactured according to Article 3, Paragraph 3 of the pressure equipment directive, without CE marking). /372
5 with single tappings Tapping sockets straight or bent Application With connection thread G½ DIN ISO 228/1, for connection dimensions to DIN form V (see page /351) With threaded connection ½-1 NPT male, for version to ASME With ferrule for pipe Ø 12 mm, S series With welding connection Ø 21.3 mm For length of tapping sockets for all metering pipe L = 120 mm and position of tapping socket, see "Technical Description" and "Function". Connection size The connection size depends on the operating pressure, the temperature of the medium (DIN and ) and the medium, e.g. Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C For liquids and gases, - up to PN : Thread G½ or welding connection Ø 21.3 mm Design - from PN 6 and PN 00: Welding connection Ø 21.3 mm Orifice plate with single tappings, orifice disk aperture form A or B (see types of primary differential pressure devices in "Technical description"); flanged between standard inlet and outlet pipe sections with lengths according to DIN Nominal diameters EN: DN 10 to DN 50 - > PN 00: Welding connection Ø 2 mm For steam - up to PN 100: Thread G½ or welding connection Ø 21.3 mm - from PN 6: Welding connection Ø 2 mm Technical specifications ASME: ½ inch to 2 inch Permissible operating temperature C Pipes and tapping sockets made of P235G1TH, Mat. No , Nominal pressure ST37., Mat. No or EN: PN 10 to PN P235GH, Mat. No ASME: class 150 to Flanges made of P250GH, Mat. No Sealing face of the end flanges Orifice plate made of Mat. No , 1.7 Plane, sealing face turned, N10/N12 to DIN ISO 1302, for soft gasket (PN 10 to PN 0) Plane, sealing face turned, N8 to DIN ISO 1302, for grooved gasket to DIN 2697 (PN 63 to PN ) Plane, RF (raised faced) for versions to ASME Metering edge deposition welded Mat. No /373
6 with single tappings Dimensional drawings Siemens AG 2009 DN PN a b k Pipe 1) D a x s Weight kg and and and and and and and Metering pipes with orifice plates and with single tappings for installation between EN flanges to EN , dimensions in mm and weights 1) The stated pipe dimensions may vary, depending on availability. The pipe dimensions used can be found in the calculation for primary differential pressure devices and/or in the order confirmation. Metering pipes with orifice plates and with single tappings for installation between ASME flanges to ASME B 16.5, dimensions in mm and weights 1) The stated pipe dimensions may vary, depending on availability. The pipe dimensions used can be found in the calculation for primary differential pressure devices and/or in the order confirmation x x x x x x 3.6 or 50 x x Nom. diameter PN a b k Pipe 1) D a x s Weight kg ½ inch Class 150 ¾ inch Class inch Class 150 1¼ inch Class 150 1½ inch Class inch Class x x x x x 3.6 or 50 x x /37
7 with single tappings Selection and ordering data Metering pipe for mounting Orifice plate with single tappings, flanged Sealing faces to the mating flanges: plane Permissible operating temperature -10 to +00 C, Orifice plate made of Mat. No , metering edge deposition welded of Mat. No , flanges and pipes made of Mat. No. 1060, pipes and tapping sockets made of Mat. No /1.0255/or Order No. 7 M E Z Nominal diameter acc. to EN DN 10 PN 10 and PN 16 1AC 3 5 PN 25 and PN 0 1AE 3 5 PN 63 1AF 3 5 PN 100 1AG3 5 PN 1AH 3 5 DN 15 PN 10 and PN 16 1BC 3 5 PN 25 and PN 0 1BE 3 5 PN 63 1BF 3 5 PN 100 1BG3 5 PN 1BH 3 5 DN 20 PN 10 and PN 16 1CC 3 5 PN 25 and PN 0 1CE 3 5 DN 25 PN 10 and PN 16 1DC 3 5 PN 25 and PN 0 1DE 3 5 PN 63 1DF 3 5 PN 100 1DG3 5 PN 1DH 3 5 DN 32 PN 10 and PN 16 1EC3 5 PN 25 and PN 0 1EE3 5 DN 0 PN 10 and PN 16 1FC3 5 PN 25 and PN 0 1FE3 5 PN 63 1FF3 5 PN 100 1FG3 5 PN 1FH3 5 DN 50 PN 10 and PN 16 1GC 3 5 PN 25 and PN 0 1GE 3 5 PN 63 1GF 3 5 PN 100 1GG3 5 PN 1GH 3 5 ½ inch Class 150 5BA 3 5 5BB 3 5 5BC 3 5 ¾ inch Class 150 5CA 3 5 5CB 3 5 5CC inch Class 150 5DA 3 5 5DB 3 5 5DC 3 5 Selection and ordering data Order No. Metering pipe for mounting 7 M E Z 1¼ inch Class 150 5EA3 5 5EB3 5 5EC3 5 1½ inch Class 150 5FA3 5 5FB3 5 5FC3 5 2 inch Class 150 5GA 3 5 5GB 3 5 5GC 3 5 Tapping sockets With threaded connection G½; for liquids and gases PN, - Opposite one another, straight 1 A 1 B - Any arrangement of tapping 1 G sockets (specify angle in plain text) With threaded connection ½-1 NPT male; for liquids and gases PN, - Opposite one another, straight 1 Q 1 R - Any arrangement of tapping 1 T sockets (specify angle in plain text -Z Y02) With ferrule for pipe Ø 12 mm, S series, max. 200 C permissible - Opposite one another, straight 1 J 1 K - Any arrangement of tapping 1 M sockets (specify angle in plain text -Z Y02) With welding connection 21.3 mm; for liquids and gases PN , or 2 mm; for liquids and gases over PN 00, for steam over PN Opposite one another, straight 1 D 1 E - Any arrangement of tapping 1 H sockets (specify angle in plain text) Shape of orifice disk aperture (see figure "Shapes of orifice disk aperture") Orifice plate form A A Quarter-circle nozzle form B B Manufactured according to pressure equipment directive (see "Questionnaire" (page /356)) Without² ) 0 According to Article 3, 1 Paragraph 3 According to category 1 2 According to category 2 3 /375
8 with single tappings Selection and ordering data Order No. Metering pipe for mounting 7 M E Z Further designs Order code 1) Add "-Z" to Order No. and specify Order code(s) and plain text. Calculation of orifice disk A11 aperture Enclose a calculation sheet "Questionnaire for calculation of a primary differential pressure device acc. DIN EN ISO 5167" with the order! Orifice plate without calculation Y01 Specify in plain text: Diameter of orifice disk aperture d =... mm Internal diameter of pipe D =... mm Radius of quarter-circle nozzle r =... mm Material certificate C02 Acceptance test certificate to EN Other materials On request Angle between the tapping Y02 sockets Specify in plain text: Angle between the tapping sockets... Additional nominal diameters On request and nominal pressure stages according to EN and ASME Cold water pressure test On request 1.5 x PN, acceptance test certificate to EN 1020 Sealing face of metering pipe On request with orifice plate, with recess Metering pipes for corrosive On request media Note on ordering Enclose a filled-out calculation sheet "Questionnaire for calculation of a primary differential pressure device according to DIN EN ISO 5167" with the order (necessary for device selection)! Scope of delivery: One-piece orifice plate with tapping sockets flanged between inlet and outlet pipes, with gaskets between orifice plate and flanges of the inlet and outlet pipes, including screws and nuts. Graphite (99.85 %) flat gasket with foil insert (1.01, 0.1 mm). Application for liquids, steam, gases, liquid gases, acids, hydrocarbons, oils and oil products. Accessories: See "SITRANS P measuring instruments for pressure". 1) Order codes additive, any sequence. 2) Option only available outside Europe (manufactured according to Article 3, Paragraph 3 of the pressure equipment directive, without CE marking). /376
9 Overview When ordering a primary differential pressure device, the calculation can be ordered at the same time. Add the Order code "A11" to the Order No. of the primary device, and enclose a filled-out calculation sheet ("Questionnaire for calculation of a primary differential pressure device according to DIN EN ISO 5167) with the order. If the calculation sheet is not complete, an extra charge will be made for the additionally required calculations. Siemens AG 2009 Calculation of primary differential pressure devices Selection and Ordering data Order No. Calculation of orifice disk 7ME1910 0A Z aperture of an orifice plate, orifice plate without support rings, ISA 1932 nozzle or Venturi nozzle (without measuring sheet or sketch) Calculation of differential 7ME1910 0D Z pressure or flow on an existing primary device Further designs Order Code Please add "-Z" to Order No. and specify Order code(s) and plain text. Enclose a calculation sheet "Questionnaire for calculation of a primary Y01 differential pressure device according to DIN EN ISO 5167 with the order! /377
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
More informationFlow Measurement SITRANS F O delta p - Primary differential pressure devices
Technical description Primary differential pressure devices to DIN EN ISO 5167 Nominal diameters EN: DN 50... DN 1000 ASME: 2 inch 40 inch Nominal pressure EN:... 0 ASME: 600 Orifice plates with annular
More informationOrifice flowmeter F O N4
Special features Suitable for any mounting positions without reduction in accuracy Complies with requirements for treatment and disinfection of swimming/ bathing pools (DIN 9 643) Simple installation Direct
More information94D / 94F / 94M / 96M
94D / 94F / 94M / 96M - 2016 1 Meter Runs MBL 500 Application Meter runs combine inlet and outlet piping with a flow element which is used for flow measurement of one-phase aggressive and non-aggressive
More informationSITRANS P measuring instruments for pressure
Overview Siemens AG 009 Supplementary electronics for 4-wire connection Design Dimensions (W x H x D) in mm (inch) Electrical connection 80 x 10 x 60 (3.15 x 4.7 x.36) Screw terminals (Pg 13.5 cable inlet)
More informationVACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY!
F.A.A.-P.M.A. MODEL 1U128A AND 1U128B REVISION 17 February 21, 2002 VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY! The following information applies to all installations
More informationORIFICE PLATE flow meters
ORIFICE PLATE flow meters 1 Differential pressure and pressure loss When a throttle element is interposed in a closed passage of fluid in piping, a difference is produced between the pressure upstream
More informationFAR51. Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications
f ti r : FAR51 Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications Application Process adapter for the microwave barriers
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationTemperature Measurement Resistance thermometers
Temperature transmitters for mounting in the connection head The following temperature transmitters are available for mounting in the connection head: SITRANS TH100 Programmable two-wire temperature transmitter
More informationCFR Series. Power Inductors OUTLINE FEATURES APPLICATIONS SPECIFICATIONS MITSUMI
CFR Series Coils, Transformers OUTLINE Power inductors for preventing the diffusion of noises generated from power circuits and suppressing noise components coming through the power lines. ø8.7 ø11 max.
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationHeavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
More informationTHD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs
CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and
More informationSSR SSR SSR SSR
DMX 52 Page DMX52 decoder firing board module 20 VAC reference Input 2 3 4 The Thyristor Firing board is compatible withdmx52 control standard 4 DMX52 triggers 2 3 4 - +- +- +- + The can trigger control
More informationPressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Oval shaped armature Encapsulated coil Push pin Manifold mounting Stacking Manifold base plug-in Manifold base plug-in
More informationJUMO flowtrans DP R. Meter run R01 and orifice plate R02. Applications. Brief description. Special features. Customer benefits.
Page 1/8 JUMO flowtrans DP R and orifice plate R02 Applications For the flow measurement of single-phase aggressive and non-aggressive gases, steam, and liquids In nominal widths up to DN 40 designed as
More informationOrifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC
Flow measurement Orifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC WIKA data sheet FL 10.01 Applications Power generation Oil production and refining Water treatment
More information10.1 Introduction Connections Overview
Content 10.1 Introduction...10.1-1 10.2 Connections Overview...10.2-1 10.2.1 Pressure/Temperature Rating of Connection versus Safety Valve...10.2-1 10.2.2 Flanged Connections...10.2-1 10.2.3 Threaded Connections...10.2-2
More information7. Are you upgrading a complete engine from a TCM/ Bendix to a Slick system? If yes, purchase a complete Slick Ignition Upgrade Kit.
1.1 PRODUCT APPLICATION INFORMATION WORKSEET The following information will aid you in selecting the correct magneto, upgrade kit, or ignition harness: 1. Engine Manufacturer 2. Engine Model Number 3.
More informationMaintenance-free shut-off globe valves PN 25/40 DN Standard variants. Application. Operating data. Remarks. Materials
Type series booklet 7161.1/17-10 BOA -H/HE Maintenance-free shut-off globe valves with bellows BOA-H BOA-HE Our bellows globe valves meet the stringent requirements of the German Clean Air Act flanged
More informationTriple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
More informationSTAAL 100 Swing check valves PN DN Applications Standard Variants Operating Data Materials Additional Information Purchase Order Data
Type series booklet 7371.1/10-10 STAAL 100 Swing check valves with bolted cover flanged or with butt weld ends AKK AKKS PN 63-100 DN 80-400 Applications In industrial plants, power stations, process and
More information10.3 Flanged Connections acc. to EN 1092
10.3 Flanged Connections acc. to EN 1092 EN 1092 is split into two sections: - EN 1092-1 edition 09-2008 for steel flanges - EN 1092-2 edition 06-1997 for cast iron flanges EN 1092 contains dimensions
More informationMaintenance-free shut-off globe valves PN 25/40 DN Standard variants. Application. Operating data. Materials
Type series booklet 7165.1/11-10 NORI 40 Maintenance-free shut-off globe valves with bellows with two-piece stem Type ZXLB Type ZXSB Our bellows seal valves meet the requirements of the TA-Luft (German
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves 8mm valve Series 33 Function Port size Flow (Max) Individual mounting Series 3/ NC M3 0.08 C v Inline OPERATIONAL BENEFITS 1. 8mm valve direct solenoid
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
More informationData Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
More informationPF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges
More informationField Variable Area Flowmeters BFP Global Purgemaster
Data Sheet IT Field Variable Area Flowmeters BFP Global Purgemaster 10A6100 n High Strength Stainless Steel Body - Rigid construction to maintain tube alignment and resistance to pipe strain. n "Snap-in"
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Manual operator Solenoid 4-way pilot with balanced poppet Air return 33 34 36 3 37 38 5 67 69 44 46 4 47 48P SERIES
More information3RG4 BERO Inductive Proximity Switches
3RG40 11 3RG40 11 0AA00 10/14 3RG40 11 0AB00 10/14 3RG40 11 0AF00 10/13 3RG40 11 0AF05 10/18 3RG40 11 0AF33 10/17 3RG40 11 0AG00 10/13 3RG40 11 0AG05 10/18 3RG40 11 0AG33 10/17 3RG40 11 0CC00 10/14 3RG40
More informationLevel Limit Switch liquiphant FTL 360 / FTL 361
Technical Information TI 184F/00/en evel imit Switch liquiphant FT 360 / FT 361 evel limit switch iquiphant II with vibrating probe. For all types of liquid. iquiphant level limit switch: FT 360, compact
More informationFlow Measurement SITRANS F C. Flow sensor MASS 2100 DI 3 to DI 40. 4/180 Siemens FI
Siemens AG Flow sensor MASS DI 3 to DI 0 Overview MASS DI 3 to DI 0 is suitable for accurate mass flow measurement of a variety of liquids and gases. The sensor offers superior performance in terms of
More informationThermowell for temperature sensors omnigrad M TW 13
Technical information TI 264T/02/en 60019743 Thermowell for temperature sensors omnigrad M TW 13 Pipe thermowell Flanged process connection Omnigrad M TW 13 thermowells are designed for the use in the
More informationSERVICE INSTRUCTION. 652 Oliver Street Williamsport, PA U.S.A. Tel Fax
652 Oliver Street Williamsport, PA. 17701 U.S.A. Tel. 570 323 6181 Fax. 570 327 7101 www.lycoming.com SERVICE INSTRUCTION DATE: March 8, 2012 Service Instruction No. 1098H (Supersedes Service Instruction
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in 4 6 Air return Manual operator Solenoid 4-way pilot with balanced poppet Bonded spool 2 7 8 2 67
More informationROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS. Automotive Seals VW BARNWELL THE SEAL OF APPROVAL
ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS Automotive Seals VW BARNWELL THE SEAL OF APPROVAL QUALITY AND SERVICE GUARANTEED Total Sealing Solutions Founded in 1972, M
More informationHeat Transfer Fluid / Hot Water Pump HPK-L. Type Series Booklet
Heat Transfer Fluid / Hot Water Pump HPK-L Type Series Booklet Legal information/copyright Type Series Booklet HPK-L All rights reserved. The contents provided herein must neither be distributed, copied,
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationTELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
More informationDATE: May 19, 2000 Service Instruction No. 1443E (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved
DATE: May 19, 2000 (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved SUBJECT: MODELS AFFECTED: TIME OF COMPLIANCE: Approved Slick Magnetos on Textron Lycoming Engines See
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationSERVICE INSTRUCTION. All Certified Lycoming direct drive engines. TIME OF COMPLIANCE: At owner s discretion.
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationThermowell For sanitary applications Model TW61, for orbital welding
Thermowells Thermowell For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 74-06 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical industry,
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More informationSELECT 3-BURNER PROPANE BARBECUE Assembly Manual
SELECT 3-BURNER PROPANE BARBECUE Assembly Manual 85-3096-2 (G31221) Propane 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts
More informationStars or starlets? Competitor overview switching devices. Only for internal use. sirius IN COMPARISON
Only for internal use Stars or starlets? Competitor overview switching devices sirius IN COMPARISON Who are the real stars? The comparison. Under ideal conditions, the human eye can make-out approximately
More informationProcess connection. Further designs. Order code. to EN
Replacement measuring cell for pressure for SITRANS P, DS III, DS III PA and DS III FF series 7 M F 4 9 9 0-7 7 7 7 0-0 D C 0 0.01... 1 bar g (0.15... 14.5 psi g) B 0.04... 4 bar g (0.6... 58 psi g) C
More informationNORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design
Type series booklet 7653.1/8-10 NORI 320 Globe valves with gland packing with non-turning stem flanged or butt-weld ends ZXLF ZXSF PN 250-320 DN 65-200 Application In industrial plants, power stations,
More informationCollision Avoidance System CAS-M light. Manual
Collision Avoidance System CAS-M light Manual V 1.10, 2/14/2017 Table of Contents Table of contents 1 System Overview... 3 1.1 Function principle... 3 1.2 Hardware... 3 1.3 Wiring... 4 1.4 CAN communication...
More informationSeries 46 Self-operated Regulators Differential Pressure and Flow Limiters Type 46-5 Type 46-6
Series 46 Self-operated Regulators Differential Pressure and Flow imiters Type 46-5 Type 46-6 Application Differential pressure and flow limitation for district heating systems with indirect connection,
More informationLYCOMING CYLINDER PRICING
SHIPPING: 2415 EMBARCADERO WAY, PALO ALTO, CA 94303 MAILING: P.O. BOX 50608, PALO ALTO, CA. 94303-0608 Phone: 650-354-1399 Fax: 650-354-1395 LYCOMING CYLINDER PRICING CYLINDER PRICING ENGINE MODEL: O-235
More informationFLANGES PRODUCT: STANDARD FLANGE CLASSIFICATION: PRESSURE CLASS CLASIFICATION:
FLANGES Gestión de Compras manufactures and supplies flanges according to standards ANSI, BS, DIN, JIS and ISO as well as according to customer specifications. PRODUCT: Flanges are a pipe fitting which
More informationSelf-operated Pressure Regulators Type Universal Pressure Reducing Valve
Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve ANSI version Application Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN
More informationSITRANS T measuring instruments for temperature
for installation in pipelines and tanks Overview The resistance thermometer is designed for installation in tanks and pipelines as well as for the measurement of temperature with hygiene requirements.
More informationType 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
More informationSpring Loaded Safety Valve. SiC 11/13/14
Spring Loaded Safety Valve SiC 11/13/14 General Features and Benefits Acc. Directive 97/23/EC of the European Parliament and the Council of 29 May 1997 on the approximation of the laws of the Member States
More informationSITRANS P measuring instruments for pressure
Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with
More informationStrainer PN 25/40 DN
Type series booklet 7127.1/9-10 NORI 40 Strainer with drain plug flanged or with butt weld ends Type FSL Type FSS PN 25/40 DN 15-300 Fields of Application In heat transfer plants, industrial plants, building
More informationPF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSVL488 Stainless Steel Safety Valve for Clean Service Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSTEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES
STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES More than 20 years of experience in design and manufacturing and service of custom made actuated Steamextraction Check valves for the Power Generation
More informationCRN. Series 740 Safety Valves. Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
More informationThe Product Range. Technical Data
The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More informationMicrobore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
More informationPush Button Units and Indicator Lights
3SB3, Inscriptions, 22 mm Insert labels Push Button Units and Indicator Lights Push buttons (clear) and illuminated push buttons with a flat button can be fitted with insert labels for identification purposes,
More informationExploded view 3 piece ball valves Series R
Exploded view 3 piece ball valves Series R Ball valve of series R with reduced bore (standard version) DN10 to DN65 Example shown: Series R DN65 Please follow assembly and maintenance instructions carefully.
More informationEclipse Vortometric Burners Series HI
Version Burner Model Parameter 6V 8V V V V 6V 8V V V 8V 3V 36V Max. Input MM BTU/hr (MW) (.8).5 (3.) 7 (5.0) 3 (6.7) 3 (9.) () (6.) 78 (3) 90 (6) 5 (37) (7) (6) Min. Input MM BTU/hr (MW) (Natural Gas)
More information2- and 3-port valves with flanged connections, PN 16
4 404 VXF43.. ACVATIX 2- and 3-port valves with flanged connections, PN 16 From the large-stroke valve line VXF43.. High-performance valves for medium temperatures from -20 220 C Valve body of nodular
More informationLevel Measurement. Continuous level measurement - Capacitance transmitters SITRANS LC500. 5/282 Siemens FI Overview.
SITRANS LC00 Overview Configuration Installation Build up of material or condensation in active shield area does not affect switch operation. SITRANS LC00 is an inverse frequency shift capacitance level
More informationSITRANS F X SITRANS FX300 3/355
Siemens AG 204 Flow Measurement Overview vortex flowmeters provide accurate volumetric and mass flow measurement of steam, gases and liquids as an all-in-one solution with integrated temperature and pressure
More informationGlobe Valve Type Fig. 1 Type 3241 Globe Valve. Mounting and Operating Instructions EB EN
Globe Valve Type 3241 Fig. 1 Type 3241 Globe Valve Mounting and Operating Instructions EB 8015-1 EN Edition July 2012 Contents Contents Page 1 Design and principle of operation.................... 4 2
More informationLined Butterfly Valve Pfeiffer Type BR 10a
Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable
More informationThermowell For sanitary applications Model TW22
Thermowells Thermowell For sanitary applications Model TW22 WIKA data sheet TW 95.22 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical industry, production of active
More informationSeries 14b - Type HD
High-Performance Control and Shut-off Butterfly Valve Series 14b - Type HD Application: Tight-closing, double-eccentric butterfl y valve especially for high requirements in the chemical industry, for example
More informationAN RPM to TACH Counts Conversion. 1 Preface. 2 Audience. 3 Overview. 4 References
AN 17.4 RPM to TACH Counts Conversion 1 Preface 2 Audience 3 Overview 4 References This application note provides look up tables for the calculation of RPM to TACH Counts for use with the EMC2103, EMC2104,
More informationOrifice plates and nozzles. Flow measurement using differential pressure
Orifice plates and nozzles Flow measurement using differential pressure - Verified standardized way of measuring - Exact measurements even for fast flowing steam and gas - Absence of moving parts - Robust
More informationMOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER Date:
MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER 15-24 Date: 11-19-2015 SUBJECT: MODELS/ S/N AFFECTED: To ADVISE MOONEY OWNERS/OPERATORS of the LYCOMING Service Instruction
More informationAPPENDIX A Instruction Set. Op Code. T states Flags Main Effects. Instructions
APPENDIX A 8085 Instruction Set Instructions ACI byte CE 7 ALL A A + CY + byte ADC A 8F 4 ALL A A + A + CY ADC B 88 4 ALL A A + B + CY ADC C 89 4 ALL A A + C + CY ADC D 8A 4 ALL A A + D + CY ADC E 8B 4
More informationCRN. Series 740 Safety Valves. 4 Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
More informationMounting and Operating Instructions EB 5894 EN. Electric control valves with jet pump. Flanged version of valve with jet pump
Electric control valves with jet pump Type 3267/5824, Type 3267/5825, Type 3267/3374, Type 3267/3274 Pneumatic control valves with jet pump Type 3267-1, Type 3267-7 Flanged version of valve with jet pump
More informationSCA Series Steel Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationMounting and Operating Instructions EB 8222 EN. Type 3310/AT and Type 3310/3278 Pneumatic Control Valves. Type 3310 Segmented Ball Valve
Type 3310/AT and Type 3310/3278 Pneumatic Control Valves Type 3310 Segmented Ball Valve Fig. 1 Type 3310/3278 with positioner Fig. 2 Type 3310/AT Mounting and Operating Instructions EB 8222 EN Edition
More informationEXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Manual operator Solenoid Individual mounting Sub-base non Sub-base Manifold mounting Manifold base Sub-base/ manifold base non with latching solenoid
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More information2- and 3-port valves with flanged connections, PN 16
4 404 VVF43.. VVF43..K VXF43.. ACVATIX 2- and 3-port valves with flanged connections, PN 16 From the large-stroke valve line VVF43.. VXF43.. High-performance valves for medium temperatures from -20 220
More informationFLOAT CHAMBERS BROCHURE
FLOAT CHAMBERS BROCHURE 2 3 Contents The perfect combination Trimod Besta level switches in Besta float chambers 4 Standard chambers for low cost applications Standard chambers PN with process connections
More informationContents CONTENTS. Trimod Besta level switches in Besta float chambers. The perfect combination
FLOAT CHAMBERS 2 3 CONTENTS Contents The perfect combination Trimod Besta level switches in Besta float chambers 4 Standard chambers for low cost applications Standard chambers PN 25 with process connections
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
More informationType 459. Type. 459 Safety Relief Valves spring loaded
Type Plain lever H3 459 Safety Relief Valves spring loaded Contents Chapter/Page Cap H2 Materials Available designs 05/02 Available designs materials 05/03 How to order Numbering system 05/04 Article numbers
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
More informationMounting and Operating Instructions EB 8111/8112 EN. Valve Series V2001 Globe Valve Type 3321
Valve Series V2001 Globe Valve Type 3321 Fig. 1 Type 3321 Valve with mounted rod-type yoke for pneumatic or electric actuators (partial view) Mounting and Operating Instructions EB 8111/8112 EN Edition
More informationProduct Data Sheet , Rev KA April 2010 Rosemount 1495 and Contents
Product Data Sheet Rosemount 1495 and 1496 Rosemount 1495 Orifice Plate Rosemount 1496 Orifice Flange Union Comprehensive offering Easy to use, prove, and troubleshoot The Rosemount 1495 Orifice Plate
More information