ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...
|
|
- Victoria Heath
- 6 years ago
- Views:
Transcription
1 ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union Female Cap Male Cap... 75
2 Female Union Female Union Surface external bright finish Size, material number, melt number, manufacturer code Dimensions for Female Union Sizes AD ID L Item No. ISO DN ISO DN ISO DN ISO DN ISO DN ISO DN ISO DN ISO DN DIN DIN DIN DIN DIN DIN DIN DIN 68
3 Union Nut Aseptic O-Ring Unions Union Nut Material: Stnr.-W acc. EN Form: Up to ISO DN 15: Hexagonnut, from ISO DN 20: Union-Nut Surface external bright finish On request: Lasermarking Certificates: On request: Certificate of acceptance acc. EN Dimensions for Union Nut Sizes GEW SW / AD Item-No. acc. / in accordance with ISO DN ISO DN 8 M 22 x 1.5 SW ISO DN 10 M 26 x 1.5 SW ISO DN 15 M 30 x 2.0 SW ISO DN 20 M 36 x 2.0 AD ISO DN 25 M 42 x 2.0 AD ISO DN 32 M 52 x 2.0 AD ISO DN 40 M 56 x 2.0 AD ISO DN 50 M 68 x 2.0 AD acc. CONNECTORS Standard / in accordance with DIN DIN 4 M 16 x 1.5 SW DIN DIN 6 M 16 x 1.5 SW DIN DIN 8 M 18 x 1.5 SW DIN DIN 10 M 22 x 1.5 SW DIN 69
4 Male Union Male Union Size, material number, melt number, manufacturer code Dimensions for Male Union Sizes A ID L Item No. ISO DN ISO DN ISO DN ISO DN ISO DN ISO DN ISO DN ISO DN DIN DIN DIN DIN DIN DIN DIN DIN 70
5 O-Ring Material: Permissible sterilization temperature: O-Ring See table below EPDM: 132 C (150 C for a short time) Silicone, Viton, Teflon and Silkoflon (PTFE): 150 C CONNECTORS Standard - Certificates: FDA Certificate Further dimensions available on request. Viton and Teflon are registered trademarks of DuPont Dow Elastomers Item-Numbers for O-Ring Sizes EPDM Silicone Viton Teflon Silkoflon PTFE (FEP/MVQ) Item No. Item No. Item No. Item No. Item No. ISO DN ISO DN ISO DN ISO DN ISO DN ISO DN ISO DN ISO DN Item No. Item No. Item No. Item No. Item-Number DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN Material resistance: see chapter Tri-Clamp Connections (Page 29) 71
6 Reduced Female Union Aseptic O-Ring Unions Reduced Female Union *non standard Size, material number, melt number, manufacturer code, Manufacturer's Logo. Dimensions for Reduced Female Union Sizes AD ID id L Item No. DN 10 - DN DN 15 - DN DN 20 - DN DN 25 - DN DN 32 - DN DN 40 - DN DN 50 - DN DIN 6 - DIN DIN DIN 8 - DIN DIN DIN 10 - DIN DIN *DN 8 - DIN
7 Reduced Male Union Reduced Male Union *non standard Size, material number, melt number, manufacturer code Dimensions for Reduced Male Union Sizes AD ID id L Item No. DN 10 - DN DN 15 - DN DN 20 - DN DN 25 - DN DN 32 - DN DN 40 - DN DN 50 - DN DIN 6 - DIN DIN DIN 8 - DIN DIN DIN 10 - DIN DIN *DN 8 - DIN
8 Female Cap Female Cap Material number, melt number, manufacturer code Dimensions for Female Cap Sizes L D Item No. DN DN DN DN DN DN DN DN DIN DIN DIN DIN DIN DIN DIN DIN 74
9 Male Cap Male Cap Material number, melt number, manufacturer code Dimensions for Male Cap Size A L Item No. DN 8 M 22 x DN 10 M 26 x DN 15 M 30 x DN 20 M 36 x DN 25 M 42 x DN 32 M 52 x DN 40 M 56 x DN 50 M 68 x DIN 4 M 16 x DIN DIN 6 M 16 x DIN DIN 8 M 18 x DIN DIN 10 M 22 x DIN 75
DIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
More informationDIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube
/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationDIN /DIN Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002
/ Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002 / Aseptic Screwed Unions This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationSÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS
SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS SÜDMO HYGIENIC CENTRIFUGAL PUMPS Designed for continuous operation on thin liquids (milk, wine, cream, beer, wort, etc.).
More informationkythe Original Aseptic Seat Valve
. kythe Original Aseptic Seat Valve ky Application ARC is an aseptic seat valve with PTFE diaphragm. It is available as a stop- or change-over valve. The valve is suited for aseptic operating conditions
More informationWelding All assembly welds are full penetration. All welds are crevice and undercut free. Weld finish & detail drawings available upon request.
Single element sanitary liquid housing Designed specifically for the food & beverage and pharmaceutical industries Sanitary triclamp body closure as standard STANDARD product Sanitary surface finish Triclamp
More informationDIN /DIN Aseptic Screwed Union for ISO 1127 Schedule Pipe
/ Aseptic Screwed Union for ISO 1127 Schedule Pipe / Aseptic Screwed Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationEDELSTAHL. Kämmer Series Aseptic and Sanitary Valves
EDELSTAHL Aseptic and Sanitary Valves 1 51917.p65 1 4/16/0, :29 PM The Kämmer 191000 Series product line provides control valve solutions for sanitary and aseptic process systems. These valves meet the
More informationARC Aseptic Remote-Controlled Valve with PTFE Diaphragm
ARC Aseptic Remote-Controlled Valve with PTFE Diaphragm PD 65143 GB5 21-1 Application ARC is an aseptic seat valve with PTFE diaphragm. It is available as a stop- or change-over valve. The valve is suited
More informationPneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
More informationGEMO UNIONS DIN11851/DIN TUBES AND FITTINGS. DIN11851 Unions All acc. To GERMANY DIN Standard EACH FITTINGS PACKAGING HAS A BARCODE
UNIONS DIN11851/DIN11850 DIN11851 Unions All acc. To GERMANY DIN Standard EA FITTINGS PAKAGING AS A BARODE 43 UNIONS DIN11851/DIN11850 The DIN union is the German standard hygienic fitting, A complete
More informationAir operated Pinch Valves Connection options:
Air operated Pinch Valves Connection options: Flange Connection Internal Thread Connection Tri-Clamp Connection Weld-on ends RJT Connection AKO Innovative Pinch Valve Technology The valve solution for
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control
More informationThe Original Seat Valve
.1 The Original Seat Valve SRC Sanitary Remote-Controlled Valve Application SRC is an air-operated seat valve in a sanitary and flexible design giving a wide field of application, e.g. as a stop valve
More informationPro M i n e nt Sigma/ 2 Diaphragm Meter i ng Pu mps
2.8 Diaphragm Metering Pumps 2. 1.1 Pro M i n e nt Sigma/ 2 Diaphragm Meter i ng Pu mps Sigma/ 2 Diaphragm Metering Pumps The Sigma/2 motor diaphragm metering pumps are produced with a high-strength inner
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical
More informationDiaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled
More informationNDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
More informationProMinent Pro M inent Sigma/ 3 Diaphragm Meter ing Pu mps. Diaphragm Rupture Warning System
Revised: 1st January 2016 2.13 2. 1. 1 Pro M inent Sigma/ 3 Diaphragm Meter ing Pu mps Sigma/ 3 The Sigma/1 motor diaphragm metering pumps are produced with a high-strength inner housing for parts subject
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
More informationNEUMO ASEPTIC TECHNOLOGY
A member of NEUMO Ehrenberg Group NEUMO ASEPTIC TECHNOLOGY STAINLESS SOLUTIONS FOR LIFE CONTENTS About NEUMO... 00 Company Portrait... 00.01 ConnectS... 01 Introduction...01.01 Flange Connection...01.02
More informationNON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
More informationGlass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases
Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases Easy installation Local indication by means of direct reading Low pressure drop Scales directly in l/h, m 3 /h, kg/h, l/min,
More informationDIN Aseptik Klemmverbindung DIN Aseptic Clamp Union
Datenblatt Datasheet DIN11864-3 Aseptik Klemmverbindung DIN11864 3 Aseptic Clamp Union liquitec AG Industrie Neuhof 54 CH-3422 Kirchberg T +41 55 450 83 00 F +41 55 450 83 01 info@liquitec.ch www.liquitec.ch
More informationAluminum Dimensions: 7.32" W 9.49"H Net Wt.: 7.9 lbs. (3.6 kg) Shipping Wt.: 9.9 lbs. Stainless Steel
DP Series Specifications DP-10 Port Dimensions (6 GPM Max.) Intake & discharge connection: Polypropylene (PPG) 3/8" Female NPT Aluminum (ADC-12) 3/8" Female NPT Stainless Steel (316) 3/8" Female NPT DP-15
More informationPneumatic Shut-off Butterfly Valve Type 3335/BR 31a
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN
More informationARC Aseptic Remote-Controlled Valve with PTFE diaphragm
Spare Parts ARC Aseptic Remote-Controlled Valve with PTFE diaphragm SP70727-GB6 2000-01 Type ARC - Stop Valve 2 Reg.: 2000-01 Intro.: 8605 Type ARC - Stop Valve Actuator DN 40 DN50 DN 65 DN80 DN 100 Pos.
More informationGEA Aseptomag valve technology - configuration key
GEA Aseptomag valve technology - configuration key Aseptic double chamber valve DK Aseptic double chamber bottom-seat valve DKBS engineering for a better world GEA Mechanical Equipment Aseptic double chamber
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationACL Gasket Materials Operating Temperature Range
ACL Gasket Materials Operating Temperature Range PHARMACEUTICAL DATA SHEET 275 250 225 250 C 250 C 250 C 260 C 200 200 C 175 150 150 C 125 100 75 50 25 30 C 0 EPDM SILICONE VITON PTFE PEEK TFM -25-50 -75-50
More information650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "TL" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. This piston actuated diaphragm
More informationIn-line diaphragm seal with sterile connection For sanitary applications Model , aseptic connection per DIN 11864
Diaphragm seals In-line diaphragm seal with sterile connection For sanitary applications Model 981.51, aseptic connection per DIN 11864 WIKA data sheet DS 98.51 Applications For direct, quickly removable
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all
More informationSTC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
More informationkysimply Unique Diaphragm Valves
. kysimply Unique Diaphragm Valves Unique DV-ST UltraPure Application Alfa Laval Unique diaphragm valves offer a complete range covering every need, for use in sterile and ultra-hygienic processes. The
More information611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
More informationDIN Coupling UNION COMPLETE F ORGED A ND CASTED DIN SKS EN A (DIN R2) Seals
SKS EN 10357-A (DIN 11850-R2) DIN 11851 Coupling The so-called dairy coupling according DIN 11851 is the most applied screw coupling within the food industry. The round thread and the huge tolerances ensure
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The
More informationType 437. Type 437. Available designs. Cap H2 Adjusting screw with bushing. Axial needle 69 beering. Lock nut. Spring plate. Spring plate. Pin.
Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring 2 Outlet body 17 Spring plate 57 Pin 61 Ball 7 Disc 1 Body Threaded
More informationProcess Filtration From Pure to Sterile
From Pure to Sterile MAIN FEATURES & BENEFITS: High mechanical and thermal stability Excellent flow rate Integrity testable according to HIMA Thermal stability up to 200 C Approved for Food Contact Use
More information22-25 LA VALVOTECNICA CIT
Table of contents SAMPLING VALVES 1. Dead Volume Free Sampling Valve : Type 125 A 2 5 2. Dead Volume Free Sampling Valve : Type 125 AUT 6-9 3. Compact Sampling Valve : Type 120 B 10-13 4. Dead Volume Free
More informationAir operated Pinch Valve type VMC
Air operated Pinch Valve type VMC Flange Internal Thread Tri-Clamp Weld-on ends Threaded spigot The flexible modular system for detachable and aseptic piping connections! The ideal solution for isolation
More informationkyalfa Laval Unique DV-ST UltraPure
kyalfa Laval Unique DV-ST UltraPure Simply Unique Diaphragm Valves Concept The standard Unique DV-ST UltraPure is designed either for manual operation or for Pneumatic operation The valve consist of a
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationACCESSORIES AND DIAPHRAGM SEAL
ACCESSORIES AND DIAPHRAGM SEAL TA102 TA201 TA202 TA203 TD101 TD103 TD104 TD202 Data sheet H20022a 05/2017 TD301 TD302 TD303 Trafag Italia Srl Via Cremona 1 20025 Legnano (Mi) Tel. +39 0331 59 23 97 Fax
More informationFAX: SPECIAL APPLICATION HOSES, METAL & TEFLON HOSES
Large Bore Teflon Fittings Selection Pipe Thread (NPT) Style 03 Flanges Lap Joint Flange Style 12 Shown with epoxy coated steel flange Cam and Groove Female Swivel Type Style 16 Also available Teflon Encapsulated
More informationO RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI
O RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI O -Rings PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY How to size your O -Rings Newman Elastomer Characteristics If you don t know the
More information611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
More informationPrice List Effective March 19, 2012
Georg Fischer Harvel LLC 300 Kuebler Road Easton, PA 18040 USA Phone: (610) 252-7355 Fax: (610) 253-4436 harvel.gfh.ps@georgfischer.com www.harvel.com PRICES SUBJECT TO CHANGE WITHOUT NOTICE PRICE SHEET
More informationSMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm
PD 6544 GB1 9911 SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm Application SMP-BCA is an aseptic double seat valve with PTFE diaphragm. It is available as a stop- or divert valve. The valve is suited
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More informationPressure transmitter UNIVERSAL CA
Pressure transmitter UNIVERSAL CA for food/pharmaceutical/biotechnology,type series CA2110 Features Universal pressure transmitter, hygienic design per EHEDG, FDA and GMP Stainless steel case, degree of
More information653, 654. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 653 / 654 manually operated 2/2-way metal diaphragm valve has a stainless steel bonnet and is available in two versions - GEMÜ 653 has a handwheel in high temperature
More informationAir Inlet/ Discharge Port
Metering Pumps The ProMinent is a pneumatically-actuated metering pump with a capacity in the 0.1 to 3.9 gph (0.24 to 14.8 l/h) range at maximum backpressures of 21 to 232 psig (0.9 to 16 bar). The consists
More informationTank Bottom Valve, Metal
Tank Bottom Valve, Metal Construction The 2/2-way metal tank bottom valve GEMÜ is manually operated with a side mounted gear which has an optical position indicator as standard. The stainless steel valve
More informationBall Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges
Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization
More informationDiaphragm seal with sterile connection With union nut (milk thread fitting) Models , , and
Pressure Diaphragm seal with sterile connection With union nut (milk thread fitting) Models 990.18, 990.19, 990.20 and 990.21 WIKA data sheet DS 99.40 for further approvals see page 7 Applications Food
More informationPROCESS EQUIPMENT COMPANY. Manufactured by: Group Defontaine Saint Herblain Cedex, France.
PROCESS EQUIPMENT COMPANY Manufactured by: Group Defontaine Saint Herblain Cedex, France www.toplineonline.com Summary Shut Off and Divert Valves Body Designs, Characteristics...1 Performance Curves, Dimensions...2-3
More informationIdentity code: Meta MTMa Diaphragm Metering Pumps Series: Meta diaphragm-type metering pump Version a
Identity code: Meta MTMa Diaphragm Metering Pumps MTMa Series: Meta diaphragm-type metering pump Version a H A Main drive Add-on drive Pump version: New Cross Reference Conversion Table from former version
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More information115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
More informationProMinent EXtronic Solenoid Diaphragm Metering Pumps
Overview: EXtronic Ideal for explosion-proof applications (see page 128 for spare parts) The ProMinent EXtronic series represents a proven technology for metering liquid media in hazardous areas classified
More informationPressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
More information"Send a signal not a technician" Mark 95AA and Mark 95AAFT upgrade kits available for currently istalled MK95 regula- tors Air Loading a MK95AA:
Mark 95 Series Sanitary ir ugmented Back Pressure Regulators The Mark 95 with air augmentation () option offers the same line sizes, Cv choices, seats, low build up characteristics, and stability of the
More informationDiaphragm valve, Plastic
Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable
More informationP-SRF V STERILE AIR PLEATED DEPTH FILTER ELEMENTS
P-SRF V STERILE AIR PLEATED DEPTH FILTER ELEMENTS Compressed Air & Process Filtration The P-SRF V filter element is a sterile grade, pleated depth filter element in a stainless-steel body. The improved
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationKest Mixer, KMS. For outstanding mixing performance in critical pharma and biotechnology applications.
Kest Mixer, KMS For outstanding mixing performance in critical pharma and biotechnology applications. DS-000002 REV B Kest Mixer, KMS The Kest Mixer is a magnetic coupled mixer. With its aseptic design
More informationSpray Pressure Control Manifold
Instruction Sheet P/N 0870G0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
More informationProcess Filtration From Pure to Sterile
From Pure to Sterile MAIN FEATURES & BENEFITS: Highly robust and mechanically stable Very durable design Integrity testable according to HIMA Thermal stability up to 200 C Approved for Food Contact Use
More informationItem Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
More informationType 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
More informationNEUMO ASEPTIC TECHNOLOGY
A member of NEUMO Ehrenberg Group NEUMO ASEPTIC TECHNOLOGY STAINLESS SOLUTIONS FOR LIFE cgmp Check Valves for Pharmaceutical and Aseptic Applications CONTENTS About NEUMO... 00 Company Portrait... 00.01
More informationMICROMOLD TM. PTFE Gaskets. Product Specifications. Envelope & Solid Donut Style 1, 2, 3 Sanitary
MICROMOLD TM ENGINEERED PLASTIC FLUID-FLOW PRODUCTS Product Specifications 7.20-2 PTFE Gaskets Envelope & Solid Donut Style 1, 2, 3 Sanitary Gaskets CONTENTS Sizes of PTFE Gaskets...... Slit Envelope Gaskets
More informationSpray Pressure Control Manifold
Instruction Sheet P/N 0870-0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 459 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationThermowell For sanitary applications Model TW22
Thermowells Thermowell For sanitary applications Model TW22 WIKA data sheet TW 95.22 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical industry, production of active
More informationGlobe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
More informationDELTA AP1 Aseptic Valves. for higher reliability, longer lifetime and lower cost
DELTA AP1 Aseptic Valves for higher reliability, longer lifetime and lower cost Description The DELTA AP1 Aseptic valve series from APV comes in two versions the Techno and the Econo. Each is available
More informationTY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
More informationDP Series Specifications
DP Series Specifications DP-10 Port Dimensions Intake & discharge connection: Polypropylene (PPG) Aluminum (ADC-12) Stainless Steel (316) (6 GPM Max.) 3/8" Female NPT 3/8" Female NPT 3/8" Female NPT DP-15
More informationOscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids
Oscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids Suitable for all kind of liquids Viscosity up to 120000 mpa s Excellent performance with changing process conditions
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position
More informationNDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
More informationmegaflo BSP Pressure Relief Vent
Pressure RELIEF VENTS PRV s SECTION 2 When it comes to pressure/vacuum protection, Girard has been putting their name and reputation on the line every day for close to 60 years. We start with only the
More informationDouble block and bleed style stainless steel butterfly valve sizes 1" to 6" [25 mm to 150 mm]. F250D for imperial tubing F251D for metric tubing
Features Keystone proven valve and actuator technology. Failsafe pneumatic interlocks. Fully machined 316L or 304L stainless steel body. Linkage driven, with only one actuator required. Linkage safety
More informationSÜDMO NEW SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS
SÜDMO SP SERIES - NEW HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS SÜDMO SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD
More information650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "L" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. his piston actuated diaphragm valve
More information12 SX1/005/U SX1/007/U SX2/013/U SX2/018/U SX3/027/U SX3/035/U SX4/046/U SX4/063/U 2.
Rotary Lobe Displacement Pumps Screwed SMS male connections. Single R00 mechanical seals with carbon/stainless steel faces. EPDM elastomers and stainless steel multi-lobe rotors. SX - Horizontally Ported
More informationSERIES 86 INSTRUMENTATION 3-PIECE TUBE FULL PORT BALL VALVES
SERIES 86 INSTRUMENTATION 3PIECE TUBE FULL PORT BALL VALVES SHARPE SERIES 86 INSTRUMENTATION BALL VALVES STANDARD FEATURES Tube Full Port Design (TFP) 3Piece Design Integral ISO Mounting Pad Lockable Handle
More informationThe Cleanest Design. SRC Sanitary Remote-Controlled Valve PD US
The Cleanest Design SRC Sanitary Remote-Controlled Valve PD 60019 US8 2001-10 Application SRC is an air-operated seat valve with a sanitary and flexible design giving a wide field of application, e.g.
More informationSATRON VTe pressure transmitter
SATRON VTe pressure transmitter belongs to the series V-transmitters which will have both analog and smart properties. SATRON VTe is used for 0-4 kpa...0-00 MPa ranges. The transmitter communicates in
More information2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 462 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
More informationHYGIENIC TUBE & PROCESS COMPONENTS DIN/ISO/METRIC
HYGIENIC TUBE & PROCESS COMPONENTS DIN/ISO/METRIC EN DIN (ISO/Metric) The most important norm range within Europe for industrial (non Food) applications consists of 2 dimension ranges. The ISO 1127 dimension
More information