DIN Aseptik Klemmverbindung DIN Aseptic Clamp Union
|
|
|
- Bethanie Norman
- 5 years ago
- Views:
Transcription
1 Datenblatt Datasheet DIN Aseptik Klemmverbindung DIN Aseptic Clamp Union liquitec AG Industrie Neuhof 54 CH-3422 Kirchberg T F info@liquitec.ch
2 Inhaltsverzeichnis Index of Contents 1 Technische Daten / Technical Details Aseptik Klemmverbindung komplett EPDM / Aseptic Clamp Union complete EPDM Aseptik Nutklemmstutzen / Aseptic Female Clamp Aseptik Bundklemmstutzen / Aseptic Male Clamp Aseptik Nutblindclamp / Aseptic Female Blind Clamp Aseptik Bundblindclamp / Aseptic Male Blind Clamp Aseptik O-Ring / Aseptic O-Ring Aseptik Klammer mit Flügelmutter / Aseptic Clamp with wing nut Bestellschlüssel / Ordering Key Rohranschluss-Tabelle 007 / Table of Pipe Connections Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 2/14
3 1 Technische Daten / Technical Details Standard-Baugrößen DIN10 DIN100 ISO08 ISO80 OD½" OD4" Werkstoffe Produktberührt: BN2 (316L) Sonderwerkstoffe wie z.b , Titan, etc. gem. Bestellschlüssel Nicht Produktberührt: oder gleichwertig Dichtungswerkstoffe EPDM FEP / Silikon FKM Sonderdichtwerkstoffe gem. Bestellschlüssel Oberflächen Produktberührte Oberflächen: elektropoliert Ra < 0,6μm andere Oberflächen gem. Bestellschlüssel Nicht Produktberührte Oberflächen: elektropoliert Ra > 1,6μm Rückverfolgbarkeit Medien Alle produktberührten Teile markiert mit Artikelnummer, Werkstoff und Chargennummer Gase und Flüssigkeiten Betriebsdruck DIN10 DIN40 = 40 bar DIN50 DIN65 = 25 bar DIN80 DIN100 = 16 bar ISO08 ISO25 = 40 bar ISO32 ISO50 = 25 bar ISO65 ISO80 = 16 bar OD½" OD1½" = 40 bar OD2" OD2½" = 25 bar OD3 OD4 = 16 bar Betriebstemperatur Dichtungswerkstoffe EPDM: -40 C bis +150 C, kurzzeitig bis +160 C FEP / Silikon: -60 C bis +200 C, kurzzeitig bis +230 C FKM: -20 C bis +200 C, kurzzeitig bis +230 C Normen Rohranschlussmaße: DIN (DIN11866 Reihe A) ISO (DIN11866 Reihe B) OD (DIN11866 Reihe C) Dichtpartie nach DIN (Form A) Zertifikate Produktberührende Teile: EN / 3.1 Produktberührende Dichtungen: FDA-Konformität, USP-Class VI, TSE-frei Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 3/14
4 Standard sizes DIN10 DIN100 ISO08 ISO80 OD½" OD4" Material Medium contacted: BN2 (316L) Special materials e.g , Titan, etc. acc. ordering key Non medium contacted: or equivalent Gasket EPDM FEP (Silicone core) FKM Special materials acc. ordering key Surface quality Medium contacted: electropolished Ra < 0,6μm other qualities acc. ordering key Non medium contacted: electropolished Ra > 1,6μm Tracability Media Product contacted material marked with article no., material and heat no. Gases and liquids Operating pressure DIN10 DIN40 = 40 bar DIN50 DIN65 = 25 bar DIN80 DIN100 = 16 bar ISO08 ISO25 = 40 bar ISO32 ISO50 = 25 bar ISO65 ISO80 = 16 bar OD½" OD1½" = 40 bar OD2" OD2½" = 25 bar OD3 OD4 = 16 bar Operating temperature gaskets EPDM: -40 C to +150 C, short time up +160 C FEP (Silicone core): -60 C to +200 C, short time up +230 C FKM: -20 C to +200 C, short time up +230 C Applicable standards Pipe dimensions: DIN (DIN11866 series A) ISO (DIN11866 series B) OD (DIN11866 series C) Gasket geometry acc. DIN (Form A) Certification Medium contacted: EN / 3.1 Medium contacted gaskets: FDA-conform, USP-Class VI, TSE-free Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 4/14
5 2 Aseptik Klemmverbindung komplett EPDM / Aseptic Clamp Union complete EPDM Größe Size Artikel-Nr. Article-No. AD ID L S D C Gewicht Weight [kg] DIN Abmessung DIN Dimension ISO Abmessung ISO Dimension OD Abmessung OD Dimension DIN10 AA.X10.64A DIN15 AA.X15.64A.35.0.C DIN20 AA.X20.64A.35.0.C DIN25 AA.X25.64A.35.0.C DIN32 AA.X32.64A.35.0.C DIN40 AA.X40.64A.35.0.C DIN50 AA.X50.64A.35.0.C DIN65 AA.X65.64A.35.0.C DIN80 AA.X80.64A.35.0.C DIN100 AA.X100.64A.35.0.C ISO08 AA.U08.64A.35.0.C ISO10 AA.U10.64A.35.0.C ISO15 AA.U15.64A.35.0.C ISO20 AA.U20.64A.35.0.C ISO25 AA.U25.64A.35.0.C ISO32 AA.U32.64A.35.0.C ISO40 AA.U40.64A.35.0.C ISO50 AA.U50.64A.35.0.C ISO65 AA.U65.64A.35.0.C ISO80 AA.U80.64A.35.0.C OD½" AA.Q05.64A.35.0.C OD¾" AA.Q07.64A.35.0.C OD1" AA.Q10.64A.35.0.C OD1½" AA.Q15.64A.35.0.C OD2" AA.Q20.64A.35.0.C OD2½" AA.Q15.64A.35.0.C OD3" AA.Q20.64A.35.0.C OD4" AA.Q20.64A.35.0.C Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 5/14
6 1 Aseptik Nutklemmstutzen / Aseptic Female Clamp Größe Size Artikel-Nr. Article-No. AD ID L S D Gewicht Weight [kg] DIN Abmessung DIN Dimension ISO Abmessung ISO Dimension OD Abmessung OD Dimension DIN10 A3.X10.64A.35.C DIN15 A3.X15.64A.35.C DIN20 A3.X20.64A.35.C DIN25 A3.X25.64A.35.C DIN32 A3.X32.64A.35.C DIN40 A3.X40.64A.35.C DIN50 A3.X50.64A.35.C DIN65 A3.X65.64A.35.C DIN80 A3.X80.64A.35.C DIN100 A3.X100.64A.35.C ISO08 A3.U08.64A.35.C ISO10 A3.U10.64A.35.C ISO15 A3.U15.64A.35.C ISO20 A3.U20.64A.35.C ISO25 A3.U25.64A.35.C ISO32 A3.U32.64A.35.C ISO40 A3.U40.64A.35.C ISO50 A3.U50.64A.35.C ISO65 A3.U65.64A.35.C ISO80 A3.U80.64A.35.C OD½" A3.Q05.64A.35.C OD¾" A3.Q07.64A.35.C OD1" A3.Q10.64A.35.C OD1½" A3.Q15.64A.35.C OD2" A3.Q20.64A.35.C OD2½" A3.Q25.64A.35.C OD3" A3.Q30.64A.35.C OD4" A3.Q40.64A.35.C Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 6/14
7 2 Aseptik Bundklemmstutzen / Aseptic Male Clamp Größe Size Artikel-Nr. Article-No. AD ID L S D Gewicht Weight [kg] DIN Abmessung DIN Dimension ISO Abmessung ISO Dimension OD Abmessung OD Dimension DIN10 B3.X10.64A.35.C DIN15 B3.X15.64A.35.C DIN20 B3.X20.64A.35.C DIN25 B3.X25.64A.35.C DIN32 B3.X32.64A.35.C DIN40 B3.X40.64A.35.C DIN50 B3.X50.64A.35.C DIN65 B3.X65.64A.35.C DIN80 B3.X80.64A.35.C DIN100 B3.X100.64A.35.C ISO08 B3.U08.64A.35.C ISO10 B3.U10.64A.35.C ISO15 B3.U15.64A.35.C ISO20 B3.U20.64A.35.C ISO25 B3.U25.64A.35.C ISO32 B3.U32.64A.35.C ISO40 B3.U40.64A.35.C ISO50 B3.U50.64A.35.C ISO65 B3.U65.64A.35.C ISO80 B3.U80.64A.35.C OD½" B3.Q05.64A.35.C OD¾" B3.Q07.64A.35.C OD1" B3.Q10.64A.35.C OD1½" B3.Q15.64A.35.C OD2" B3.Q20.64A.35.C OD2½" B3.Q25.64A.35.C OD3" B3.Q30.64A.35.C OD4" B3.Q40.64A.35.C Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 7/14
8 3 Aseptik Nutblindclamp / Aseptic Female Blind Clamp Größe Size Artikel-Nr. Article-No. D L Gewicht Weight [kg] DIN Abmessung DIN Dimension ISO Abmessung ISO Dimension OD Abmessung OD Dimension DIN10 F0.X10.64A.35.C DIN15 F0.X15.64A.35.C DIN20 F0.X20.64A.35.C DIN25 F0.X25.64A.35.C DIN32 F0.X32.64A.35.C DIN40 F0.X40.64A.35.C DIN50 F0.X50.64A.35.C DIN65 F0.X65.64A.35.C DIN80 F0.X80.64A.35.C DIN100 F0.X100.64A.35.C ISO08 F0.U08.64A.35.C ISO10 F0.U10.64A.35.C ISO15 F0.U15.64A.35.C ISO20 F0.U20.64A.35.C ISO25 F0.U25.64A.35.C ISO32 F0.U32.64A.35.C ISO40 F0.U40.64A.35.C ISO50 F0.U50.64A.35.C ISO65 F0.U65.64A.35.C ISO80 F0.U80.64A.35.C OD½" F0.Q05.64A.35.C OD¾" F0.Q07.64A.35.C OD1" F0.Q10.64A.35.C OD1½" F0.Q15.64A.35.C OD2" F0.Q20.64A.35.C OD2½" F0.Q25.64A.35.C OD3" F0.Q30.64A.35.C OD4" F0.Q40.64A.35.C Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 8/14
9 4 Aseptik Bundblindclamp / Aseptic Male Blind Clamp Größe Size Artikel-Nr. Article-No. D L Gewicht Weight [kg] DIN Abmessung DIN Dimension ISO Abmessung ISO Dimension OD Abmessung OD Dimension DIN10 G0.X10.64A.35.C DIN15 G0.X15.64A.35.C DIN20 G0.X20.64A.35.C DIN25 G0.X25.64A.35.C DIN32 G0.X32.64A.35.C DIN40 G0.X40.64A.35.C DIN50 G0.X50.64A.35.C DIN65 G0.X65.64A.35.C DIN80 G0.X80.64A.35.C DIN100 G0.X100.64A.35.C ISO08 G0.U08.64A.35.C ISO10 G0.U10.64A.35.C ISO15 G0.U15.64A.35.C ISO20 G0.U20.64A.35.C ISO25 G0.U25.64A.35.C ISO32 G0.U32.64A.35.C ISO40 G0.U40.64A.35.C ISO50 G0.U50.64A.35.C ISO65 G0.U65.64A.35.C ISO80 G0.U80.64A.35.C OD½" G0.Q05.64A.35.C OD¾" G0.Q07.64A.35.C OD1" G0.Q10.64A.35.C OD1½" G0.Q15.64A.35.C OD2" G0.Q20.64A.35.C OD2½" G0.Q25.64A.35.C OD3" G0.Q30.64A.35.C OD4" G0.Q40.64A.35.C Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 9/14
10 5 Aseptik O-Ring / Aseptic O-Ring Größe Size Artikel-Nr. EPDM Article-No. EPDM Artikel-Nr. FEP / Silikon Article-No. FEP (Silicone core) Artikel-Nr. FKM Article-No. FKM DIN Abmessung DIN Dimension ISO Abmessung ISO Dimension OD Abmessung OD Dimension DIN10 01.N08.64A.0 01.N08.64A.3 01.N08.64A.2 DIN15 01.D15.64A.0 01.D15.64A.3 01.D15.64A.2 DIN20 01.D20.64A.0 01.D20.64A.3 01.D20.64A.2 DIN25 01.D25.64A.0 01.D25.64A.3 01.D25.64A.2 DIN32 01.D32.64A.0 01.D32.64A.3 01.D32.64A.2 DIN40 01.D40.64A.0 01.D40.64A.3 01.D40.64A.2 DIN50 01.D50.64A.0 01.D50.64A.3 01.D50.64A.2 DIN65 01.D65.64A.0 01.D65.64A.3 01.D65.64A.2 DIN80 01.D80.64A.0 01.D80.64A.3 01.D80.64A.2 DIN D100.64A.0 01.D100.64A.3 01.D100.64A.2 ISO08 01.N08.64A.0 01.N08.64A.3 01.N08.64A.2 ISO10 01.N10.64A.0 01.N10.64A.3 01.N10.64A.2 ISO15 01.N15.64A.0 01.N15.64A.3 01.N15.64A.2 ISO20 01.N20.64A.0 01.N20.64A.3 01.N20.64A.2 ISO25 01.N25.64A.0 01.N25.64A.3 01.N25.64A.2 ISO32 01.N32.64A.0 01.N32.64A.3 01.N32.64A.2 ISO40 01.N40.64A.0 01.N40.64A.3 01.N40.64A.2 ISO50 01.N50.64A.0 01.N50.64A.3 01.N50.64A.2 ISO65 01.N65.64A.0 01.N65.64A.3 01.N65.64A.2 ISO80 01.N80.64A.0 01.N80.64A.3 01.N80.64A.2 OD½" 01.N08.64A.0 01.N08.64A.3 01.N08.64A.2 OD¾" 01.K07.64A.0 01.K07.64A.3 01.K07.64A.2 OD1" 01.K10.64A.0 01.K10.64A.3 01.K10.64A.2 OD1½" 01.K15.64A.0 01.K15.64A.3 01.K15.64A.2 OD2" 01.K20.64A.0 01.K20.64A.3 01.K20.64A.2 OD2½" 01.K25.64A.0 01.K25.64A.3 01.K25.64A.2 OD3" 01.K30.64A.0 01.K30.64A.3 01.K30.64A.2 OD4" 01.K40.64A.0 01.K40.64A.3 01.K40.64A.2 Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 10/14
11 6 Aseptik Klammer mit Flügelmutter / Aseptic Clamp with wing nut DIN11866-A DIN DIN11866-B ISO DIN11866-C OD D Artikel-Nr. Article-No. Gewicht Weight [kg] C DIN10 / 15 ISO 08 / 10 / 15 OD½" / ¾" C DIN20 / 25 / 32 ISO20 / 25 OD1" C DIN40 ISO32 / 40 OD1½" C DIN50 OD2" C DIN65 ISO50 OD2½" C DIN80 ISO65 OD3" C ISO C DIN100 OD4" C ISO C Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 11/14
12 7 Bestellschlüssel / Ordering Key 1. Artikel / Article AD Aseptik Klemmverbindung kompl. / Aseptic Clamp Union compl. A3 Aseptik Nutklemmstutzen / Aseptic Female Clamp B3 Aseptik Bundklemmstutzen / Aseptic Male Clamp F0 Aseptik Nutblindclamp / Aseptic Female Blind Clamp G0 Aseptik Bundblindclamp / Aseptic Male Blind Clamp 01 Aseptik O-Ring / Aseptic O-Ring 2. Norm / Standard 2.1 Nennweite / Nominal Size (siehe Rohranschluss-Tabelle 007 / see table of pipe connections 007) X DIN Abmessung / DIN dimension 05 DN05 Nennweite / DN05 Nominal Size U ISO Abmessung / ISO dimension 07 DN07 Nennweite / DN07 Nominal Size Q OD Abmessung / OD dimension 08 DN08 Nennweite / DN08 Nominal Size 10 DN10 Nennweite / DN10 Nominal Size 15 DN15 Nennweite / DN15 Nominal Size 20 DN20 Nennweite / DN20 Nominal Size 25 DN25 Nennweite / DN25 Nominal Size 32 DN32 Nennweite / DN32 Nominal Size 40 DN40 Nennweite / DN40 Nominal Size 50 DN50 Nennweite / DN50 Nominal Size 65 DN65 Nennweite / DN65 Nominal Size 80 DN80 Nennweite / DN80 Nominal Size 100 DN100 Nennweite / DN100 Nominal Size 3. Material / Material (316L) BN (Hastelloy C22) Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 12/14
13 4. Dichtungsmaterial / Seal Material 0 EPDM (Standardausrüstung für Baugruppen / Standard for Assemblies) 1 Silikon / Silicone 2 FKM (Viton) 3 FEP / Sil (Silikon-Kern / Silicone core) 4 PEEK 5 FFKM (Kalrez) 6 PTFE rein / PTFE pure 7 FEP / EPDM (EPDM-Kern / EPDM core) 8 FEP / FKM (FKM-Kern / FKM core) 5. Oberfläche / Surface C Innenoberfläche Ra<0.6; elektropoliert / Internal Surface Ra<0.6; electropolished E Innenoberfläche Ra<0.4; elektropoliert / Internal Surface Ra<0.4; electropolished weitere Oberflächen auf Anfrage / other surfaces on request Aseptik Komplettbaugruppe Aseptic Complete Assembly Bestellbeispiel / Ordering example: AD.U10.64A.35.0.C AD U10 64A 35 0 C 64A Aseptik Einzelteil Aseptic Single Component Bestellbeispiel / Ordering example: A3.U10.64A.35.C A3 U10 64A 35 C 64A Aseptik O-Ring Aseptic O-Ring Bestellbeispiel / Ordering example: 01.N10.64A.0 01 N10 64A 0 64A Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 13/14
14 8 Rohranschluss-Tabelle 007 / Table of Pipe Connections 007 Nennweite Nominal Size Reihe A (DIN) Series A (DIN) DIN Reihe B (ISO) Series B (ISO) Reihe C (OD) Series C (OD) 05 Ø12.70x Ø19.05x Ø10.00x1.00 Ø13.50x Ø13.00x1.50 Ø17.20x1.60 Ø25.40x Ø19.00x1.50 Ø21.30x1.60 Ø38.10x Ø23.00x1.50 Ø26.90x1.60 Ø50.80x Ø29.00x1.50 Ø33.70x2.00 Ø63.50x Ø76.20x Ø35.00x1.50 Ø42.40x Ø41.00x1.50 Ø48.30x2.00 Ø101.60x Ø 53.00x1.50 Ø60.30x Ø152.40x Ø 70.00x2.00 Ø76.10x Ø 85.00x2.00 Ø88.90x2.30 Ø x Ø x2.00 Ø114.30x Ø x2.00 Ø139.70x Ø x2.00 Ø168.30x2.6 Maß- und Konstruktionsänderungen vorbehalten. Revisionsdatum: 06/18 Specifications and design are subject to change without notice. Date of revision: 06/18 Datenblatt DIN Aseptik Klemmverbindung / Data Sheet DIN Aseptic Clamp Union 14/14
ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...
ASEPTIC-0-RING UNIONS Female Union... 68 Union Nut... 69 Male Union... 70 O-Ring... 71 Reduced Female Union... 72 Reduced Male Union... 73 Female Cap... 74 Male Cap... 75 Female Union Female Union Surface
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2 way angle seat globe valve has a low maintenance aluminium piston actuator. The valve spindle is sealed by a selfadjusting
)D]RQVNLNRPDGL]DãWLüHQLVXVDHSRNVLERMRPLOLHSRNVLSUDãNRPSODVWLILFLUDQMH Bušenje
![)D]RQVNLNRPDGL]DãWLüHQLVXVDHSRNVLERMRPLOLHSRNVLSUDãNRPSODVWLILFLUDQMH Bušenje](/thumbs/88/115662113.jpg ")D]RQVNLNRPDGL]DãWLüHQLVXVDHSRNVLERMRPLOLHSRNVLSUDãNRPSODVWLILFLUDQMH Bušenje")
Primjena )D]RQVNLNRPDGLXSRWUHEOMDYDMXVH]DVSDMDQMHSODVWLþQLK39&',1XFLMHYRYRGQLPVLVWHPLPD]DYRGXLQHXWUDOQH medije Radni tlak 10bara Dozvoljeni radni tlak 16 bara maks. Radna temperatrua 70ºC maks. MATERIJAL
Pneumatic operated 2/2-way Diaphragm Valve
Pneumatic operated 2/2-way Valve Light tube valve body Flow optimised body in stainless steel Zero dead volume Easy to weld Type can be combined with... Type 8640/8644 Type 6012/6014 P Type 8311 Electrical
PAV1 ISO A ACCIAIO STEEL STAHL ACIER. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques. Norme: ISO A
ISO A ACCIAIO STEEL STAHL ACIER 74 Caratteristiche tecniche I Nominal size Max working pressure Rated flow Max flow rate Min burst pressure DNP BG ISO mm Mpa l/min l/min MPa MPa MPa cc 06 1 6.3 5 35 12
In-line diaphragm seal with sterile connection For sanitary applications Model , aseptic connection per DIN 11864
Diaphragm seals In-line diaphragm seal with sterile connection For sanitary applications Model 981.51, aseptic connection per DIN 11864 WIKA data sheet DS 98.51 Applications For direct, quickly removable
Spare part list DEPA Air Operated Diaphragm Pumps Series M
: DB25-50-CA/SA Drawing-No.: 03-00-16 25.01 Air valve, internal 25/40 DB 1 2508--- 50.01 Air valve, internal 50 DB 1 5008--- 25.02 Center block, assy. 25 DB 1 250303--- 40.02 Center block, assy. 40 DB
GEA Aseptomag valve technology - configuration key
GEA Aseptomag valve technology - configuration key Aseptic double chamber valve DK Aseptic double chamber bottom-seat valve DKBS engineering for a better world GEA Mechanical Equipment Aseptic double chamber
PAO1-PAOC. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques
127 PAO1-PAOC Caratteristiche tecniche ISO A PASSAGGIO LIBERO/ACCIAIO FREE FLOW/STEEL FREIER DURCHLAUF/STAHL PASSAGE LIBRE/ACIER I PAO1 Nominal size Max working pressure Rated flow Max flow rate Min burst
GMP - designed Maintenance-free Diaphragm valve made of forged stainless steel according to ASME BPE and investment casting
type series booklet 8646.1/22-10 GMP - designed Maintenance-free Diaphragm valve made of forged stainless steel according to ASME BPE and investment casting with Buttweld ends or clamps PN 10 size range
Pneumatically operated zero dead volume T-Valve CLASSIC
Pneumatically operated zero dead volume T-Valve CLASSIC Zero dead volume body - no welds Hermetical separation of fluids from the operating mechanism by diaphragm Universal and robust actuators with modular
Index. Vorschweißflansche ab Seite 119 Welding neck flanges from Page 119. Blindflansche ab Seite 123 Blind flanges from Page 123
Flansche Flanges Index Vorschweißflansche ab Seite 119 Welding neck flanges from Page 119 Blindflansche ab Seite 123 Blind flanges from Page 123 Lose Flansche ab Seite 125 Loose flanges from Page 125 Glatte
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The
Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models , and
Pressure Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models 990.22, 990.52 and 990.53 WIKA data sheet DS 99.41 for further approvals see page 7 Applications Sanitary applications
Flush-mounted pressure and level transmitters - KERAMESS KS series 100/101 -
FEATURES PRECISE MEASUREMENTS WITH AN ACCURACY OF ± 0.15% FS WITH DRY CERAMIC MEASURING CELL TURN-DOWN 10 EASY TO CLEAN AND HIGH PROTECTION CLASSES IP67 AND IP69K INTEGRATED ON-SITE DISPLAY OR EXTERNAL
PST4. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques
81 PST4 FLAT FACE/SCREW VITE VALVOLA PIANA/ACCIAIO FLAT FACE SCREW COUPLINGS/STEEL FLACHDICHTENDE SCHRAUBKUPPLUNGEN/STAHL COUPLEURS FACE PLANE A VISSER/ACIER Nominal size Max working pressure Rated flow
NEUMO BioControl Model
Accessories NEUMO Model 910.60 WIKA Data Sheet AC 09.14 Applications Bio and pharmaceutical industry Sanitary applications Food industry Special Features NEUMO No dead space Hygienic design Materials and
2/2 way Angle-Seat Valve for medium up to C, DN15-50
Type 2000 can be combined with 2/2 way Angle-Seat Valve for medium up to + 180 C, DN15-50 High flow rates Very high cycle life Clamp body according to EN ISO 2852, BS 4825 or ASME BPE For process valves
EDELSTAHL. Kämmer Series Aseptic and Sanitary Valves
EDELSTAHL Aseptic and Sanitary Valves 1 51917.p65 1 4/16/0, :29 PM The Kämmer 191000 Series product line provides control valve solutions for sanitary and aseptic process systems. These valves meet the
Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Material Pipe Operating Operating Page
Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Pipe Operating Operating Page O.D. x s Pressure Temperature Plastic thread 10 25670 PVDF 63.0 x 3.6 2.5-10 thread max. 140 C 61 Plastic
2/2-Way and T Valve Bodies in Stainless Steel
2/2-Way and T Valve Bodies in Stainless Steel Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and
Order Code for GEA Tuchenhagen VESTA Sampling Valves. Typ H_A/I 2/2 Way Seat Valve
Order Code for VESTA Sampling Valves Typ H_A/I 2/2 Way Seat Valve engineering for a better world GEA Mechanical Equipment The VESTA sampling valve is used for aseptic product sampling from pipes or tanks.
Welding All assembly welds are full penetration. All welds are crevice and undercut free. Weld finish & detail drawings available upon request.
Single element sanitary liquid housing Designed specifically for the food & beverage and pharmaceutical industries Sanitary triclamp body closure as standard STANDARD product Sanitary surface finish Triclamp
Series 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "TL" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. This piston actuated diaphragm
Tank Equipment. A member of NEUMO Ehrenberg Group. Edition 1.1
Tank Equipment A member of NEUMO Ehrenberg Group Edition 1.1 AWH Tank Equipment Contents Table of Contents Page AWH Tank Equipment Contents 3 VPureMix - Magnetic Coupled Mixer 4 AWH-Connect and Accessories
kyalfa Laval Unique DV-ST UltraPure
kyalfa Laval Unique DV-ST UltraPure Simply Unique Diaphragm Valves Concept The standard Unique DV-ST UltraPure is designed either for manual operation or for Pneumatic operation The valve consist of a
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or
PVV3 VITE A VALVOLA SCREW COUPLINGS SCHRAUBKUPPLUNGEN VISSES. Caratteristiche tecniche. Technical data. Technische Merkmale
VITE A VALVOLA SCREW COUPLINGS SCHRAUBKUPPLUNGEN VISSES 122 PVV3 Caratteristiche tecniche I Nominal size Max working pressure Rated fl o w Max fl ow rate Min burst pressure DNP BG ISO mm Mpa l/min l/min
1 body / (DN15-DN20) J / (DN25-DN50) J / (DN65-DN80) K
Type: Description: standard safety valve angular shape metal sealing spring-loaded enlarged outlet flanges acc. to EN1092-1 or ANSI: inlet: PN16-PN63 outlet: PN16-PN40 cone liftable with gas-tight cap
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
DN crimping diameter (guide values) [mm] 2 7,0 4 9,9
![DN crimping diameter (guide values) [mm] 2 7,0 4 9,9](/thumbs/78/78659247.jpg "DN crimping diameter (guide values) [mm] 2 7,0 4 9,9")
ØD hose hose PN pricked* ød part no. 2 400 bar yes 5 9-946-02-00-012 2 630 bar - 5 9-946-02-00-020 2 630 bar yes 5 9-946-02-01-020 4 550 bar yes 8 9-946-04-00-010 *for inert gases technical data of the
550 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal
Angle Seat lobe Valve, Metal Construction The EMÜ pneumatically operated / way angle seat globe valve has a low maintenance piston actuator. The valve spindle is sealed by a self-adjusting gland packing
Pressure transmitter COMPACT ECOnomic
Pressure transmitter COMPACT ECOnomic for food/pharmaceutical/biotechnology, Type series CA1110 Features Digitale pressure transmitter Hygienic design according to EHEDG Case and wetted parts of stainless
Mark 978 Series STERIFLOW. Sanitary Control Valve. Sanitary Valves Mark 978 Globe-Style Control Valve AVAILABLE FINISHES FEATURES APPLICATIONS
Mark 978 Series Sanitary Control Valve The Mark 978 Sanitary Control Valve Series is designed to meet the required specifications for sterile process control valves. The MK978 Series is suitable for a
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
Pressure transmitter UNIVERSAL CA
Pressure transmitter UNIVERSAL CA for food/pharmaceutical/biotechnology,type series CA2110 Features Universal pressure transmitter, hygienic design per EHEDG, FDA and GMP Stainless steel case, degree of
T EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "L" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. his piston actuated diaphragm valve
Diaphragm seal with sterile connection With union nut (milk thread fitting) Models , , and
Pressure Diaphragm seal with sterile connection With union nut (milk thread fitting) Models 990.18, 990.19, 990.20 and 990.21 WIKA data sheet DS 99.40 for further approvals see page 7 Applications Food
NEUMO ASEPTIC TECHNOLOGY
A member of NEUMO Ehrenberg Group NEUMO ASEPTIC TECHNOLOGY STAINLESS SOLUTIONS FOR LIFE CONTENTS About NEUMO... 00 Company Portrait... 00.01 ConnectS... 01 Introduction...01.01 Flange Connection...01.02
DIN 2353 LEGGERA O PESANTE - DIN 2353 LIGHT ORHEAVY - DIN 2353 LEICHTER ODER SCHWERER BAUREIHE - DIN 2353 LEGERE OU LOURDE
PPV3 AG DIN 2353 LEGGERA O PESANTE - DIN 2353 LIGHT ORHEAVY - DIN 2353 LEICHTER ODER SCHWERER BAUREIHE - DIN 2353 LEGERE OU LOURDE BG USA ISO ØT CH2 CH3 øe L1 L2 L3 F COD. (F) COD. (M) 10 2 06 10 06L 22
Tandem valve, welded valve configuration
Tandem valve, welded valve configuration Fully integrated in Bürkert s Process Control Systems Quality certifications Type 2034 can be combined with... Type 6012 Solenoid banjo valve Stroke limitation
DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up
GEMO UNIONS DIN11851/DIN TUBES AND FITTINGS. DIN11851 Unions All acc. To GERMANY DIN Standard EACH FITTINGS PACKAGING HAS A BARCODE
UNIONS DIN11851/DIN11850 DIN11851 Unions All acc. To GERMANY DIN Standard EA FITTINGS PAKAGING AS A BARODE 43 UNIONS DIN11851/DIN11850 The DIN union is the German standard hygienic fitting, A complete
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical
Application: Sanitary Solutions
SANITARY Sanitary regulators are engineered for pressure control in sanitary, or clean environments. The applications include pharmaceutical, biotechnology, food and beverage, cosmetics, chemical and other
DIN Coupling UNION COMPLETE F ORGED A ND CASTED DIN SKS EN A (DIN R2) Seals
SKS EN 10357-A (DIN 11850-R2) DIN 11851 Coupling The so-called dairy coupling according DIN 11851 is the most applied screw coupling within the food industry. The round thread and the huge tolerances ensure
Flow-Through Fitting ARF 215
Flow-Through Fitting ARF 215 Standard Models Model for Pressurized Sensors Latest Product Information: www.knick.de Warranty Defects occurring within 1 year from delivery date shall be remedied free of
SVL488 Stainless Steel Safety Valve for Clean Service Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
2/2-Way and T Valve Bodies in Stainless Steel
2/2-Way and T Valve Bodies in Stainless Steel Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and
Thermowell For sanitary applications Model TW22
Thermowells Thermowell For sanitary applications Model TW22 WIKA data sheet TW 95.22 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical industry, production of active
2/2- and 3/2-way solenoid valve for aggressive fluids
2/2- and 3/2-way solenoid valve for aggressive fluids Type 0121 can be combined with Direct-acting, media-separated valve with diameter of up to DN 8 Maintenance-free pivoted armature technology Vibration-proof,
DMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial
Maße / Dimensions 3-teiliger Kugelhahn Serie DG1 3-pce ball valve series DG1 DN 8 - DN 50 voller Durchgang / full bore
DN 8 - DN 50 voller Durchgang / full bore Antriebsanschluss nach DIN 3337 / ISO 5211 - siehe Datenblatt Antriebsanschluss Mounting plate acc. to DIN 3337 / ISO 5211 - see data sheet mounting plate DN NPS
operated system. Due to their large opening areas, minimize turbulence, offer low pressure drop and provide gentle treatment of low
Butterfly Valve VF... operated system. Due to their large opening areas, minimize turbulence, offer low pressure drop and provide gentle treatment of low and medium viscosity product. The handle mechanically
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The
SECURITY EFFICIENCY SIMPLICITY TECHNICAL DOCUMENTATION TECHNISCHE DOKUMENTATION DOCUMENTATION TECHNIQUE
SECURITY EFFICIENCY SIMPLICITY TECHNICAL DOCUMENTATION TECHNISCHE DOKUMENTATION DOCUMENTATION TECHNIQUE BIAR SA Rte du Gd-St-Bernard 16 CH-1933 Sembrancher SWITZERLAND Tél. +41 27 779 11 11 Fax +41 27
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Serie Series L-BV5 L_300 Flüssigkeitsringpumpen Liquid ring pumps 3 AC; 50/60 Hz 3 AC; 50/60 Hz Vakuumbetrieb Vacuum operation Typen Types 2BV5
DIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
Clean Service CATALOG. Safety Relief Valves Series 48X. The-Safety-Valve.com
Clean Service Safety Relief Valves Series 48X CATALOG The-Safety-Valve.com Valve finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High Efficiency Mediumcontrolled
Kest Mixer, KMS. For outstanding mixing performance in critical pharma and biotechnology applications.
Kest Mixer, KMS For outstanding mixing performance in critical pharma and biotechnology applications. DS-000002 REV B Kest Mixer, KMS The Kest Mixer is a magnetic coupled mixer. With its aseptic design
Pressure transmitter for elevated media temperatures
Data Sheet 402050 Page 1/7 JUMO dtrans p31 Pressure transmitter for elevated media temperatures General application Pressure transmitters are used for measuring the relative (gauge) and absolute pressures
DIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube
/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
Diaphragm seal with sterile connection For sanitary applications Models , , and , threaded connection
Diaphragm seals Diaphragm seal with sterile connection For sanitary applications Models 990.18, 990.19, 990.20 and 990.21, threaded connection WIKA data sheet DS 99.40 for further approvals see page 3
CATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
Flush-mounted pressure and level transmitters - KERAMESS KS S 200/201 - Superior Precision
FEATURES HIGH PRECISION ± 0.05% FS, TURN DOWN 10, VACUUM SAFE WITH DRY CERAMIC MEASURING CELL OPTIONAL WITH HART PROTOCOL TANK LINEARISATION FOR STANDARD TANK SHAPES AND SPECIAL DESIGNS THANKS TO VOLUMETRIC
Process Filtration From Pure to Sterile
Process Filtration From Pure to Sterile PF-EG 0080 0600 Multiple Housings MAIN FEATURES & BENEFITS: Standard version, etched and passivated, or Superplus version, electropolished Ra < 0,8 µm Code 7 plug
Sanitary Seals. Dimensional Drawing for VCS Sanitary In-Line Diaphragm Seal Process wetted surface finish max. Ra of 32 µ in. 1.
Sanitary Seals TRI-LMP IN-LINE (VS) SEL Dimensional Drawing for VS Sanitary In-Line Diaphragm Seal Process wetted surface finish max. Ra of 32 µ in. 1.5 (38,1) O dod L 3.54 (90,0) Dimensions are in inches
Aseptic Right Angle Valve 6051 with EHEDG-Certification DN 15 up to DN 50
Aseptic Right Angle Valve 6051 with EHEG-Certification 15 up to 50 Pneumatic control valve in right angle design with integrated microporcessor positioner type 8049 or as a shut-off valve for applications
Exhaust rail system 920, pneumatic system for vehicles in motion
Pneumatic Rail System PRS, is a fully automatic, exhaust extraction system for all types of vehicles. The system is based on a nozzle expanded by compressed air, fixing and sealing the nozzle tightly around
IGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.
DMK P Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
555 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal Aseptic
Angle Seat Globe Valve, Metal Aseptic Construction The GEMÜ 555 pneumatically operated 2/2-way valve has a piston actuator and is designed for pure steam applications. The valve has a PTFE seat for tight
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
Sterile version and Asepto sampling systems
BB-11 afety afety terile version and Asepto sampling systems Hygienic Processing components... All medium contact materials traceable Component of the BB modular system afety version uaranteed zero dead
611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
NEUMO ASEPTIC TECHNOLOGY
A member of NEUMO Ehrenberg Group NEUMO ASEPTIC TECHNOLOGY STAINLESS SOLUTIONS FOR LIFE cgmp Check Valves for Pharmaceutical and Aseptic Applications CONTENTS About NEUMO... 00 Company Portrait... 00.01
PORTAELETTRODI HAMILTON
PORTAELETTRODI HAMILTON Housings Different processes have different requirements for sensors to provide an accurate and reliable measurement. Being in contact with the media is the most important one.
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
Sterile version and Asepto sampling systems
terile version and Asepto sampling systems Hygienic Processing components... All medium contact materials traceable Component of the BB modular system version uaranteed zero dead volume Fits in BB sterile
Tank Bottom Valve, Metal
Tank Bottom Valve, Metal Construction The 2/2-way metal tank bottom valve GEMÜ is manually operated with a side mounted gear which has an optical position indicator as standard. The stainless steel valve
GEMÜ sterile sampling systems
GEMÜ sterile sampling systems safe, reliable, durable www.gemu-group.com Sterile sampling systems On the safe side with GEMÜ Hygienic design GEMÜ valve bodies made out of 1.4435 stainless steel, electropolished,
Thermowell For sanitary applications Model TW61, for orbital welding
Thermowells Thermowell For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 74-06 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical industry,
VA 40. Variable-area flowmeter. For explosion protected devices please refer to Supplementary Installation an Operating Instructions:
KROHNE 01/2005 7.02266.22.00 GR Installation and Operating Instructions VA 40 Variable-area flowmeter For explosion protected devices please refer to Supplementary Installation an Operating Instructions:
VACOMASS. Technical information VACOMASS control valve. Version Diaphragm control valve with central or falling flow axis
VACOMASS Technical information Diaphragm control valve with central or falling flow axis Version 2012-02 DESCRIPTION OF CONSTRUCTION AND FUNCTION SPECIAL CHARACTERISTICS: Universal use: The slidegate valve
DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
DIN /DIN Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002
/ Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002 / Aseptic Screwed Unions This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
ACL Gasket Materials Operating Temperature Range
ACL Gasket Materials Operating Temperature Range PHARMACEUTICAL DATA SHEET 275 250 225 250 C 250 C 250 C 260 C 200 200 C 175 150 150 C 125 100 75 50 25 30 C 0 EPDM SILICONE VITON PTFE PEEK TFM -25-50 -75-50
check Butterfly valves soft seated Butterfly valves Ptfe seated Butterfly valves for hot air/smokes double eccentric Butterfly valves BOLOGNA
check valves check valves disc CheCk valves series GA - GB - Gh - GN - GT swing CheCk valves series Gs swing check valves series gs bi-directional type swing check valves series gs dimensions from 2 to
SVF03. Normal-Sicherheitsventil, fe. Type: SAFETY VALVE, FLANGE DESIGN SYSTEM VALVES. Range of application: Description:
Type: Description: standard safety valve angular shape metal sealing spring-loaded flanges acc. to EN1092-1 or ANSI inlet: PN16-PN63 outlet: PN16-PN40 cone liftable with gas-tight cap TÜV certified Range
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 459 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
Oil Solutions. SAE Flanges
Oil Solutions Flanges www.oilsolutions.com.au sales@oilsolutions.com.au Distributor Walter Stauffenberg GmbH & Co. KG P.O.Box 1745 D-58777 Werdohl Im Ehrenfeld 4 D-58791 Werdohl Tel. : + 49 (0) 2392 916-0
MICROMOLD TM. PTFE Gaskets. Product Specifications. Envelope & Solid Donut Style 1, 2, 3 Sanitary
MICROMOLD TM ENGINEERED PLASTIC FLUID-FLOW PRODUCTS Product Specifications 7.20-2 PTFE Gaskets Envelope & Solid Donut Style 1, 2, 3 Sanitary Gaskets CONTENTS Sizes of PTFE Gaskets...... Slit Envelope Gaskets
Flush-mounted pressure and level transmitters - TPF series 100/101 -
FEATURES PRECISE MEASUREMENTS WITH ± 0.15% FS WIDE RANGE OF PROCESS CONNECTIONS FOR HYGIENIC APPLICATIONS TURN-DOWN 10 VACUUM-PROOF PIEZORESISTIVE MEASURING CELL WITH STAINLESS STEEL MEMBRANE MEASURING
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact