PVV3 VITE A VALVOLA SCREW COUPLINGS SCHRAUBKUPPLUNGEN VISSES. Caratteristiche tecniche. Technical data. Technische Merkmale
|
|
|
- Della Lynch
- 6 years ago
- Views:
Transcription
1 VITE A VALVOLA SCREW COUPLINGS SCHRAUBKUPPLUNGEN VISSES 122 PVV3 Caratteristiche tecniche I Nominal size Max working pressure Rated fl o w Max fl ow rate Min burst pressure DNP BG ISO mm Mpa l/min l/min MPa MPa MPa cc Male Female Coupled Fluid spillage , ,5 32, , , , , , , , Intercambiabilità: con i principali produttori Occlusione: valvola Aggancio: a vite Materiale: acciaio Finitura: Zn-Fe (Cr III) Filettature: BSP NPT SAE METRICHE Guarnizioni standard: NBR Temperatura d esercizio: -25 C +100 C Guarnizioni opzionali: FKM, EPDM o altro Pressioni di esercizio: bar Connessione in pressione: consentita (lato maschio o lato femmina) Massima pressione residua: pressione d esercizio Technical data Interchange: with the main producers Occlusion: poppet Locking: screw Material: steel Finishing: Zn-Fe (Cr III) Threads: BSP NPT SAE METRIC Standard seals: NBR Working temperature: -25 C +100 C Optional seals: FKM, EPDM or more Working pressure: bar Connection under pressure: allowed (both male or female side) Max residual pressure: working pressure E Technische Merkmale Austauschbarkeit: mit den wichtigsten Lieferanten Verschluss: ventil Kupplung: Schraubweise Werkstoff: Stahl Ausführung: Zn-Fe (Cr III) Gewinde: BSP NPT SAE METRISCHE Standard-Dichtungen: NBR Betriebstemperatur: -25 C +100 C Dichtungen nach Wahl: FKM, EPDM, usw. Betriebsdruck: bar Kuppeln unter Druck: erlaubt (Steckerseite oder Muffeseite) Max. Restdruck: Betriebsdruck Caracteristiques techniques Interchangeabilité: avec les principaux producteurs Obturation: clapet Accrochage: a vissé Matériel: acier Traitement: Zn-Fe (Cr III) Taraudage: BSP NPT SAE METRIQUES Joints standard: NBR Température de service: -25 C +100 C Joints facultatifs: FKM, EPDM, ect. Pression de service: bar Connexion sous pression: possible (côté male ou femelle) Pression restante max: pression de service D F
2 123 PVV3 PVV3 DN06 - BG 1 - ISO 6.3 THREADS L2 L3 L4 ØT F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE IG BSP 1/4" DIN X PVV PVV NPT 1/4" ANSI B PVV PVV AG L M14x1,5 ISO L PVV PVV AGS L M14x1,5 ISO L PVV PVV PVV3 DN10 - BG 2 - ISO 10 THREADS L2 L3 L4 ØT F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE IG ,2 BSP 1/4" DIN X PVV PVV ,2 NPT 1/4" ANSI B PVV PVV ,2 BSP 3/8" DIN X PVV PVV ,2 NPT 3/8" ANSI B PVV PVV ,2 M16x1,5 ISO PVV PVV ,2 M18x1,5 ISO PVV PVV IG ,2 9/16"-18 UNF 2B SAE J PVV PVV AG 2 65,9 63,1 14,1 9/16"-18 UNF 2A SAE J 514 PVV PVV AGS 2 85,1 82,3 33,3 9/16"-18 UNF 2A SAE J 514 PVV PVV AG 5 66,3 63,5 12 BSP 3/8" DIN B PVV PVV , BSP 1/4" DIN A PVV PVV ,3 63,5 12 BSP 3/8" DIN A PVV PVV AG 7 65, NPT 1/4" ANSI B PVV PVV , R 1/4"-19 UNI ISO 7/1 PVV PVV AG 3 61, L M12x1,5 ISO L PVV PVV , L M14x1,5 ISO L PVV PVV , L M16x1,5 ISO L PVV PVV , L M18x1,5 ISO L PVV PVV , S M16x1,5 ISO S PVV PVV , S M18x1,5 ISO S PVV PVV , S M20x1,5 ISO S PVV PVV AGS 3 77, L M12x1,5 ISO L PVV PVV , L M14x1,5 ISO L PVV PVV , L M16x1,5 ISO L PVV PVV , L M18x1,5 ISO L PVV PVV , S M16x1,5 ISO S PVV PVV , S M18x1,5 ISO S PVV PVV , S M20x1,5 ISO S PVV PVV THREADS IG 1 IG 2 AG 2 AG 3 AG 5 AG 7 AGS 2 AGS 3
3 PVV3 124 PVV3 DN13 - BG 3 - ISO 12.5 THREADS CH2 L2 CH3 L3 L4 ØT F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE IG ,5 BSP 3/8" DIN X PVV PVV , NPT 3/8" ANSI B PVV PVV ,5 BSP 1/2" DIN X PVV PVV ,5 NPT 1/2" ANSI B PVV PVV , BSP 3/4" DIN X PVV PVV , NPT 3/4" ANSI B PVV PVV ,5 M14x1,5 ISO PVV PVV ,5 M16x1,5 ISO PVV PVV ,5 M18x1,5 ISO PVV PVV ,5 M20x1,5 ISO PVV PVV IG ,5 9/16"-18 UNF 2B SAE J PVV PVV ,5 3/4"-16 UNF 2B SAE J PVV PVV ,5 7/8"-14 UNF 2A SAE J PVV PVV ,5 M16x1,5 SAE J 2244/1 PVV PVV ,5 M22x1,5 SAE J 2244/1 PVV PVV AG , ,6 11,1 3/4"-16 UNF 2A SAE J PVV PVV ,5 16 M20x1,5 ISO PVV PVV AG , ,2 16,7 3/4"-16 UNF 2A SAE J 514 PVV PVV AGS , ,1 37,6 3/4"-16 UNF 2A SAE J 514 PVV PVV , ,6 41,1 7/8"-14 UNF 2A SAE J 514 PVV PVV AG , BSP 3/8" DIN B PVV PVV ,5 13 BSP 1/2" DIN B PVV PVV ,5 11 M16x1,5 DIN 3863-U PVV PVV ,5 16 M20x1,5 DIN 3863-U PVV PVV ,5 14 M22x1,5 DIN 3863-U PVV PVV AG , L M14x1,5 ISO L PVV PVV , L M16x1,5 ISO L PVV PVV , L M18x1,5 ISO L PVV PVV , L M22x1,5 ISO L PVV PVV , L M26x1,5 ISO L PVV PVV , S M18x1,5 ISO S PVV PVV , S M20x1,5 ISO S PVV PVV , S M22x1,5 ISO S PVV PVV , S M24x1,5 ISO S PVV PVV , S M30x2 ISO S PVV PVV , L M18x1,5 ISO L PVV PVV AGS , L M14x1,5 ISO L PVV PVV , L M16x1,5 ISO L PVV PVV , L M18x1,5 ISO L PVV PVV , L M18x1,5 ISO L PVV PVV , L M22x1,5 ISO L PVV PVV , L M26x1,5 ISO L PVV PVV , S M18x1,5 ISO S PVV PVV , S M20x1,5 ISO S PVV PVV , S M22x1,5 ISO S PVV PVV , S M24x1,5 ISO S PVV PVV , S M30x2 ISO S PVV PVV , L M18x1,5 ISO L PVV PVV , L M22x1,5 ISO L PVV PVV
4 125 PVV3 PVV3 DN20 - BG 4 - ISO 19 THREADS L2 L3 L4 ØT F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE IG 1 83,5 76,5 BSP 1/2" DIN X PVV PVV NPT 1/2" ANSI B PVV PVV ,5 78,5 BSP 3/4" DIN X PVV PVV NPT 3/4" ANSI B PVV PVV ,5 74,5 M18x1,5 ISO PVV PVV M22x1,5 ISO PVV PVV M26x1,5 ISO PVV PVV M30x1,5 ISO PVV PVV IG /4"-16 UNF 2B SAE J PVV PVV /8"-14 UNF 2B SAE J PVV PVV "1/16-16 UN 2B SAE J PVV PVV AG "1/16-16 UN 2A SAE J 514 PVV PVV AGS 2 111,1 104,1 41,1 7/8"-14 UNF 2A SAE J 514 PVV PVV ,4 108,4 45,4 1"1/16-16 UN 2A SAE J 514 PVV PVV AG BSP 3/4" DIN A PVV PVV AG L M18x1,5 ISO L PVV PVV L M22x1,5 ISO L PVV PVV L M26x1,5 ISO L PVV PVV L M30x2 ISO L PVV PVV S M18x1,5 ISO S PVV PVV S M20x1,5 ISO S PVV PVV S M22x1,5 ISO S PVV PVV S M24x1,5 ISO S PVV PVV S M30x2 ISO S PVV PVV AGS L M18x1,5 ISO L PVV PVV L M22x1,5 ISO L PVV PVV L M26x1,5 ISO L PVV PVV L M30x2 ISO L PVV PVV S M18x1,5 ISO S PVV PVV S M20x1,5 ISO S PVV PVV S M22x1,5 ISO S PVV PVV S M24x1,5 ISO S PVV PVV S M30x2 ISO S PVV PVV AGS 4 108,5 101,5 38,5 1"-14 UNS 2A SAE J 1453 PVV PVV THREADS IG 1 IG 2 AG 1 AG 2 AG 3 AG 5 AGS 2 AGS 3 AGS 4
5 PVV3 126 PVV3 DN25 - BG 5 - ISO 25 THREADS CH2 L2 CH3 L3 L4 ØT F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE IG ,5 BSP 3/4" DIN X PVV PVV T ,5 BSP 3/4" DIN X PVV E ,5 NPT 3/4" ANSI B PVV PVV T ,5 NPT 3/4" ANSI B PVV E ,5 BSP 1" DIN X PVV PVV T ,5 BSP 1" DIN X PVV E ,5 NPT 1" ANSI B PVV PVV T ,5 NPT 1" ANSI B PVV E ,5 M30x1,5 ISO PVV PVV T ,5 M30x1,5 ISO PVV E IG ,5 1"1/16-16 UN 2B SAE J PVV PVV T ,5 1"1/16-16 UN 2B SAE J PVV E ,5 1"5/16-12 UN 2B SAE J PVV PVV T ,5 1"5/16-12 UN 2B SAE J PVV E AG ,5 18 BSP 1" DIN B PVV PVV T ,5 18 BSP 1" DIN B PVV E ,5 16 BSP 3/4" DIN A PVV PVV T ,5 16 BSP 3/4" DIN A PVV E ,5 18 BSP 1" DIN A PVV PVV T ,5 18 BSP 1" DIN A PVV E THREADS IG 1 IG 2 AG 3 AG 5 AGS 3
6 127 PVV3 THREADS CH2 L2 CH3 L3 L4 ØT F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE AG , L M26x1,5 ISO L PVV PVV T , L M26x1,5 ISO L PVV E , L M30x2 ISO L PVV PVV T , L M30x2 ISO L PVV E , L M36x2 ISO L PVV PVV T , L M36x2 ISO L PVV E , L M45x2 ISO L PVV PVV T , L M45x2 ISO L PVV E , S M30x2 ISO S PVV PVV T , S M30x2 ISO S PVV E , S M36x2 ISO S PVV PVV T , S M36x2 ISO S PVV E , S M42x2 ISO S PVV PVV T , S M42x2 ISO S PVV E , S M52x2 ISO S PVV PVV T , S M52x2 ISO S PVV E AGS L M26x1,5 ISO L PVV PVV T L M26x1,5 ISO L PVV E L M30x2 ISO L PVV PVV T L M30x2 ISO L PVV E L M36x2 ISO L PVV PVV T L M36x2 ISO L PVV E L M45x2 ISO L PVV PVV T L M45x2 ISO L PVV E S M30x2 ISO S PVV PVV T S M30x2 ISO S PVV E S M36x2 ISO S PVV PVV T S M36x2 ISO S PVV E S M42x2 ISO S PVV PVV T S M42x2 ISO S PVV E S M52x2 ISO S PVV PVV T S M52x2 ISO S PVV E
7 PVV3 128 PVV3 DN30 - BG 6 - ISO 31.5 THREADS L2 L3 L4 ØT F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE IG 1 119,2 114,5 BSP 1"¼ DIN X PVV PVV ,5 BSP 1"¼ DIN X PVV T ,2 114,5 NPT 1"¼ ANSI B PVV PVV ,5 NPT 1"¼ ANSI B PVV T ,7 116 BSP 1"½ DIN X PVV PVV BSP 1"½ DIN X PVV T ,7 116 NPT 1"½ ANSI B PVV PVV NPT 1"½ ANSI B PVV T AG 3 117, L M52x2 ISO L PVV PVV L M52x2 ISO L PVV T , S M42x2 ISO S PVV PVV S M42x2 ISO S PVV T ,2 116, S M52x2 ISO S PVV PVV , S M52x2 ISO S PVV T AGS 3 141, S M42x2 ISO S PVV PVV S M42x2 ISO S PVV T ,2 147, S M52x2 ISO S PVV PVV , S M52x2 ISO S PVV T THREADS IG 1 AG 3 AGS 3
8 129 ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVV3 PLASTIC NOMINAL SIZE FEMALE DUST CAP MALE DUST PLUG COLOUR MATERIAL DNP BG ISO SPVV SPVV RED Polypropylene SPVV SPVV RED Polypropylene SPVV SPVV RED Polypropylene SPVV SPVV BLACK Polypropylene SPVV SPVV RED Polypropylene SPVV SPVV RED Polypropylene SPVV SPVV RED Polypropylene METAL NOMINAL SIZE FEMALE DUST CAP MALE DUST PLUG COLOUR MATERIAL DNP BG ISO SPVV SPVV Aluminium SPVV SPVV Aluminium SPVV SPVV Aluminium SPVV SPVV Aluminium SPVV SPVV Aluminium GUARNIZIONI DI RICAMBIO / SPARE PARTS / ERSATZDICHTUNGEN / JOINTS AL CODICE DELLA GUARNIZIONE IN NBR AGGIUNGERE E PER EPDM o V PER VITON TO THE NBR GASKET CODE ADD E FOR EPDM OR V FOR VITON ZU DER ARTIKELNR. DER NBR DICHTUNG GEBEN SIE E FUER EPDM ODER V FUER VITON AN AU CODE DU JOINT EN NBR JOINDRE E POUR EPDM OU V POUR VITON NOMINAL SIZE FEMALE GASKET OUTSIDE O-RING DNP BG ISO NBR PTFE NBR PVV PVV PVV PVV PVV PVV PVV PVV PVV PDV PVV PVV PAV PVV PVV PVV PVV PAV
PST4. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques
81 PST4 FLAT FACE/SCREW VITE VALVOLA PIANA/ACCIAIO FLAT FACE SCREW COUPLINGS/STEEL FLACHDICHTENDE SCHRAUBKUPPLUNGEN/STAHL COUPLEURS FACE PLANE A VISSER/ACIER Nominal size Max working pressure Rated flow
PAV1 ISO A ACCIAIO STEEL STAHL ACIER. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques. Norme: ISO A
ISO A ACCIAIO STEEL STAHL ACIER 74 Caratteristiche tecniche I Nominal size Max working pressure Rated flow Max flow rate Min burst pressure DNP BG ISO mm Mpa l/min l/min MPa MPa MPa cc 06 1 6.3 5 35 12
PAO1-PAOC. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques
127 PAO1-PAOC Caratteristiche tecniche ISO A PASSAGGIO LIBERO/ACCIAIO FREE FLOW/STEEL FREIER DURCHLAUF/STAHL PASSAGE LIBRE/ACIER I PAO1 Nominal size Max working pressure Rated flow Max flow rate Min burst
DIN 2353 LEGGERA O PESANTE - DIN 2353 LIGHT ORHEAVY - DIN 2353 LEICHTER ODER SCHWERER BAUREIHE - DIN 2353 LEGERE OU LOURDE
PPV3 AG DIN 2353 LEGGERA O PESANTE - DIN 2353 LIGHT ORHEAVY - DIN 2353 LEICHTER ODER SCHWERER BAUREIHE - DIN 2353 LEGERE OU LOURDE BG USA ISO ØT CH2 CH3 øe L1 L2 L3 F COD. (F) COD. (M) 10 2 06 10 06L 22
VALVOLE A SFERA A PASSAGGIO TOTALE, SERIE EXTRA PESANTE PN50 ( 9 filetti) Ball valves full bore, Extra Heavy Type (9 threads)
A PASSAGGIO TOTALE, SERIE EXTRA PESANTE PN50 ( 9 filetti) Ball valves full bore, Extra Heavy Type (9 threads) Caratteristiche tecniche Technical features Corpo e sfera : Ottone CW617N UNI EN 12165 Asta
CAT GB. Quick-release couplings for Diagnosis. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949
CAT. 0117-GB Quick-release couplings for Diagnosis UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949 Quick-release couplings for Diagnosis Features Applications Benefits Recoendations Interchangeable according
valvole unidirezionali one-way valves
La FOR rafforza la propria gamma prodotti con l introduzione delle valvole unidirezionali. Tali valvole permettono il libero passaggio in un solo senso (quello indicato dalla freccia) e lo impediscono
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
GE2 G 1/2 DN A B
GE2 +GE2 CARBON STEEL Type: ball valve GE 2 way Body: block Material: 1,0737 Ball seats: from DN4 up to DN25 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 500 Bar depending on valve size and seal s
Tubes and stiffener sleeves Use of stiffener sleeves
Tubes and stiffener sleeves Use of stiffener sleeves very thick wall thickness not recommended thicker wall thickness decreasing pressure resistance increasing wall thickness ideal wall thickness no stiffener
SERIES: VLS. INTERCHANGE: With similar couplings MAIN APPLICATIONS. Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant
INTERCHANGE: With similar couplings MAIN APPLICATIONS Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant VLS series is the screw to connect coupling with poppet style valving,
Ball Valves Gemels GE2 2-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE2 2-way high pressure ball valves
Stainless Steel Ball Valves Gemels 34.1.1 GE2 2-WAY HIGH PRESSURE BALL VALVES GE2 stainless steel GE2 G 1/2 DN13 4 4 4 4 A B Type and way of valve GE2 2-way high pressure ball valves Valves dimension of
Hydraulic & Offshore Supplies GE3 3-Way High Pressure Ball Valves Brochure YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE www.gemels.it
ACCESSORI ACCESSORIES
ACCESSORI ACCESSORIES A art. 556 ACCESSORI - Rubinetti portamanometri a tre vie costruzione in bronzo limite di impiego 16 bar / 80 C attacchi M F - - 1/2 - tipo C/FLANGIA - tipo C/FLANGIA E PREMISTOPPA
Valvola a sfera sanitaria manuale. Manual sanitary ball valve
Valvola a sfera sanitaria manuale Manual sanitary ball valve Valvola a sfera sanitaria manuale Manual sanitary ball valve elemento element qtà quantity Elenco parti / Parts list descrzione description
A PREMIER SERIES FLAT FACE COUPLERS ISO Interchange
A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure
TECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
FILTRAZIONE IDRAULICA HYDRAULIC FILTRATION
FILTRAZIONE IDRAULICA HYDRAULIC FILTRATION Serie FD-1 Filtri in linea per le alte pressioni In linea high pressure filters CORPO FILTRO Caratteristiche tecniche Descrizione: Filtri di linea per alte pressioni
QUICK COUPLINGS DHI. ver. 0001
QUICK COUPLINGS DHI www.manuli-hydraulics.com Q.SAFE DHI INTRODUCTION MQS-DHI DIRECT HOSE INTEGRATION An innovative system to enable direct assembly of the quick-release coupling to the flexible hose,
MULTI-COUPLING PLATES
MULTI-COUPLING PLATES MP Series Hydraulic Multi-Coupling Plate Overview - Front end loaders - Harvesting equipment - Construction machinery - Refrigeration - Snow removal equipment - Energy sector - Any
CAT GB. Agricultural Series to ISO 7241-A Standards. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949
CAT. 0112-GB Agricultural to ISO 7241-A Standards UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949 QUICK-RELEASE COUPLINGS FOR AGRICULTURE Features Applications Benefits Recoendations Interchangeable according
TECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
INNESTI RAPIDI QUICK FITTINGS EMBOUTS RAPIDES KUPPLUNGSSTECKER
INNESTI RAPIDI QUICK FITTINGS EMBOUTS RAPIDES KUPPLUNGSSTECKER 2Raccorderia Fittings INNESTI RAPIDI CON PROFILO INTERNAZIONALE QUICK FITTINGS WITH INTERNATIONAL PROFILE RACCORDS RAPIDES AVEC PROFIL INTERNATIONAL
Serie 300 PISTOLE DI SOFFIAGGIO BLOW GUNS. Quick Couplings AGGIORNAMENTO: 11 APRILE 2012 UPDATED APRIL 11, 2012
Serie 300 PISTOE DI SOFFIAGGIO BOW GUNS AGGIORNAMENTO: 11 APRIE 2012 UPDATED APRI 11, 2012 13.59 Caratteristiche Tecniche / Technical Characteristics Scheda Materiali / Specifications 1 Attacco terminale
Quick Coupling Products Distribution. Catalogue 3800-DS/UK
Quick Coupling Products Distribution Catalogue 38-DS/UK For your safety! Under certain circumstances, quick couplings can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks.
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
ACCESSORI POMPE E MOTORI PUMPS AND MOTORS ACCESSORIES
SUPPORTS GROUP SUPPORTS GROUP SUPPORTS GROUP RACCORDI CONNECTORS 1 2 3 MANICOTTI DI TRASCINAMENTO MALES COUPLING Pag. Page D-2 D-3 D-5 D-6 D-8 D-1 -0.060 17.5 M12X1.5-0.060 M6 0-0.011 SUPPORTS GROUP 1
Quick Coupling Products. Catalogue 3800-IND/UK
Quick Coupling Products Catalogue 3800-IND/UK For your safety! Under certain circumstances, quick couplings can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. Only
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
BC. Materials. Working temperature (Seals) Sectors: Industrial, Agricultural
1 SERI ISO-A Manufactured according ISO 7241-A norm, size meets also ISO 5675 requirements. Poppet Valve or Ball closing system. BSP, NPTF, SAE/ORB threads. Others available upon request. Materials Body:
MULTI-K TOP COAT MULTI-COUPLING MULTI COUPLING. Tailor-made according to customer s needs Compact, reliable and safe PATENT PENDING
MULTI-K MULTI-COUPLING TOP COAT 107 PATENT PENDING DN 10 to 19 Tailor-made according to customer s needs Compact, reliable and safe 250 bar General features: ARGUS multi-couplings, which consist of a fixed
SMT8B pump series. Applications / applicazioni. Flow media/fluidi
SMT8B pump series Settima designs and manufactures hydraulic 3 screw pumps and helical rotors pumps. Settima screw pumps, coupled together with external or immersed motors, run quietly and with no pulsations,
Flat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings
ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION
NON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
Fluido idraulico Fluid. Viscosità cinematica consigliata Kinematic viscosity suggested
POMPE AD INGRANAGGI FISSAGGIO 3 FORI-UNI 3 HOLES-UNI HYDRAULIC CODICE FAMIGLIA FAMILY CODE 05-0 NPH UNI Data: Lunedì 3 giugno 20 Codice fascicolo:997-400-050 Fluido idraulico Fluid Viscosità cinematica
valvole VDMA 18 mm azionamento pneumatico
valvole VDMA 18 mm azionamento pneumatico pneumatically piloted valves - VDMA 18 mm Valvole a spola 5/-5/3 5/-5/3 spool valves A norma VDMA 4563 - taglia 0 (18 mm) Compliant to norm VDMA 4563 - size 0
Materiali impiegati. 1 CORPO VALVOLA: Alluminio. 2 SPOLA: Alluminio 3 GUARNIZIONE SPOLA: NBR. 4 MOLLA: Acciaio. 6 PISTONE: Tecnopolimero
Caratteristiche Genarali Funzionamento: a spola Tipo valvola: interfaccia ISO 5599/1 Connessione: su sottobase ISO Materiale corpo: alluminio Uso Singolo: Si Uso in batteria: Si Funzioni disponibili: 5/2;
FILTRAZIONE DI PROCESSO PROCESS FILTRATION
FILTRAZIONE DI PROCESSO PROCESS FILTRATION Serie IFD-R4 Filtri duplex in linea Inline duplex filter CORPO FILTRO Descrizione: Portata massima: Pressione max di esercizio: Connessioni: Valvola by-pass:
* The sizing shown is based on air supply of 5.5 bar to pilot the actuator
Economy Pneumatic Actuated PVC-U Ball Valve Economy PVC-U ball valve Pneumatic Actuated EPDM / PTFE seals, seats Imperial, Metric or BSP end connections Sizes 1/2" to 4" Pressure range 10 Bar VOLT PVC-U
Quick Release Couplings & Live Swivel Joints
hardy spicer HOSE FITTINGS DRIVESHAFTS Quick Release Couplings & Live Swivel Joints, 17-1 Discovery Road, Dandenong South, Victoria, 175 Toll free Ph: 100 04 67 DISCLAIMER Disclaimer The information and
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
IGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1200AD/E 01 2004 SINGLE SEAT TWO WAYS PED 97/23/CE Art.3 Section 3 TYPE 1200 AD Normally open Air closes DESCRIPTION The 1200 HYGIENIC pneumatic control valves are with
Raccordi gasolio forati 1 via. Connections eye no beat. Bicones brass joints. Fittings for braking and diesel systems
Raccordi gasolio forati 1 via Tipo di materiale: acciaio Filettatura metrica Code Desc. d x L x pace 1450000100 6x15x1 1450000195 8x16x1 1450000200 8x16x1,25 1450000210 10x23x1 1450000212 10x18x1,25 1450000214
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
2 START PERKINS POMPE GRUPPO PUMPS GROUP ESEMPIO DI ORDINAZIONE IN CODICE /EXAMPLE OF ORDERING CODE 2SP PRKS - G. Pompe ad ingranaggi Gear pumps
POMPE GRUPPO PUMPS GROUP Pompe ad ingranaggi 2 START A= ESEMPIO DI ORDINAZIONE IN CODICE /EXAMPLE OF ORDERING CODE 2SP A 14 D (H) - 1 G (VT) CILINDRATA cm³/giro DISPLACEMENT c m ³ /rev. Flangia e coperchio
FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE
4 FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE Typ/Type CS-VE/CS-EP PN 10/10 AUS GLASFASERVERSTÄRKTEM VINYLESTERHARZ (VE) ODER
Linea - Line. raccordi a compressione compression fittings
5300 Linea - Line raccordi a compressione compression fittings Raccordi a compressione/ Compression fittings SYSTEM FIELDS OF APPLICATION Mainly used in distribution systems for drinking water, sanitary
4500 Linea / Line FIELDS OF APPLICATION SYSTEM
4500 Linea - Line Raccordi a compressione con anello tagliato per tubo in polietilene ad alta e bassa densità. Compression fittings for low and high density polyethylene pipe with brass ring 4500 Linea
Dust Caps Plastic with wire harness
Screw-to-connect Couplings TLX Range COUPLINGS AND NIPPLE Body Size Connection Part No. Dimension locking Weight sleeve ex Coupling Nipple Zoll Dash Description Type Standards Coupling Nipple (mm) (inch)
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
METRIC LIGHT MALE 24 FLARE MASCHIO METRICO LEGGERO SVASATURA 24 CEL DIN 3853
METRIC LIGHT MALE 24 FLARE MASCHIO METRICO LEGGERO SVASATURA 24 CEL DIN 3853 part nr. hose ID thread T d pipe hex E cut-off C codice [in] [mm] size [in] [mm] [in] [mm] [in] [mm] key [in] [mm] SP05030412
POMPE A PISTONI AD ASSE INCLINATO
POMPE A PISTONI AD ASSE INCLINATO BENT AXIS PISTON PUMPS Fluido idraulico Fluid Viscosità cinematica consigliata Kinematic viscosity suggested Minerale o sintetico compatibile con guarnizioni: Mineral
QUICK CONNECT TECHNOLOGY.
QUICK CONNECT TECHNOOGY One hand Connection Push-pull isconnection Eine Hand Kuppeln Push-Pull ösen Water Pneumatic Hydraulic Electrical Accessories 66 QUICK CONNECT TECHNOOGY ..... QUICK COUPINGS FOR
Master Catalog 2015 Edition. Quick Couplings Ball Valves Hydraulic Clamps
Master Catalog 2015 Edition Quick Couplings Ball Valves Hydraulic Clamps Oil and Gas Construction Fluid Power Transportation 1 DNP Americas 281-388-0253 fax 281-388-1902 www.dnpamericas.com 1 DNP Americas
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
DIN Aseptik Klemmverbindung DIN Aseptic Clamp Union
Datenblatt Datasheet DIN11864-3 Aseptik Klemmverbindung DIN11864 3 Aseptic Clamp Union liquitec AG Industrie Neuhof 54 CH-3422 Kirchberg T +41 55 450 83 00 F +41 55 450 83 01 info@liquitec.ch www.liquitec.ch
SKU: DR4306. Fixed Orifice Double Regulating Valve
SKU: DR4306 VOLT Fixed Orifice Double Regulating Valve 1/2" - 2" Brass Double Regulating Valve with Test Points 1/2" - 2" Messing Doppelregelventilmit Testpunkte 1/2" - 2" Latón Doble Válvula reguladora
Microbore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
TECHNICAL CATALOGUE BALL VALVES: PARIS
TECHNICAL CATALOGUE BALL VALVES: PARIS TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
Hydraulic Products. For Clean and Leak-free Hydraulic Systems. Hydraulics
Hydraulic Products For Clean and eak-free Hydraulic Systems Hydraulics Hydraulic Range The Key to eadership is our Mindset We have maintained our roots in the heart of Sweden throughout our expansion to
Vanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series
New! Vanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series Raccord à bride / Flange Filetage intérieur / Internal Thread Raccord clamp / Tri-Clamp Raccord à souder / Weld-on ends
Funzione, regolazione sicurezza. Function, regulation and safe
Funzione, regolazione e e sicurezza n an sa Function, regulation and safe Indice / Index / Function, regulation and safe / Flow regulators METAL series / Flow regulators EASY series / Flow regulators POLYMER
IN ACCIAIO INOX AD INNESTO AUTOMATICO E ACCESSORI
N O X INOX Serie/Series RORDI IN IIO INOX D INNESTO UTOMTIO E ESSORI STINESS STEE PUSH-IN FITTINGS ND ESSORIES aratteristiche Tecniche / Technical haracteristics Materiali e omponenti / omponent Parts
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 FITTINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 25/08 204 PERFORMANCE CURVE 25/15 205 PERFORMANCE CURVE 25/25 206
Seal: NBR. Silicone-free. Regulations. DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 97/23/EC (PED)
Non-Return Valves Non-return valves allow compressed air to flow in one direction and prevent it from flowing in the other. Fitted upstream of the circuit to be protected, they provide total protection.
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements
Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 459 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
Index. 01 PVC ball valves. 02 PP ball valves. 03 upvc Superior ball valves. 04 Butterfly valves. 05 Replacement parts.
00 00 Index 01 PVC ball valves Specifications and characteristics Two-way ball valves Three-way ball valves 3 piece unions 02 PP ball valves Specifications and characteristics Water-meter valve Ball valves
TECHNICAL CATALOGUE GAS BALL VALVES: BERLIN
TECHNICAL CATALOGUE GAS BALL VALVES: BERLIN TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
hydraulics CEJN Multi-X Flexible multi connections for quick and easy handling
hydraulics CEJN MultiX Flexible multi connections for quick and easy handling CEJN MultiX allows you to Minimize downtime during tool changes Connect the hydraulic lines with residual pressure Install
Complete Hydraulic Set System 100
Diagnostics System 100 Measuring-System System 100 Technical The design of the Tema System 100 allows the check of static and dynamic pressures as well as vacuum. With the integrated self-venting device
ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...
ASEPTIC-0-RING UNIONS Female Union... 68 Union Nut... 69 Male Union... 70 O-Ring... 71 Reduced Female Union... 72 Reduced Male Union... 73 Female Cap... 74 Male Cap... 75 Female Union Female Union Surface
DMP 331. Industrial Pressure Transmitter for Low Pressure DRUCK & TEMPERATUR LEITENBERGER GMBH. Stainless Steel Sensor
DRUCK & TEMPERATUR LEITENBERGER GMBH DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from
AISI316L 1/4 NPT Pressure Regulator R serie Regolatore di pressione da 1/4 NPT in AISI316L serie R
AISI316L 1/4 NPT Pressure Regulator R serie Regolatore di pressione da 1/4 NPT in AISI316L serie R Suitable for automation equipment to onshore, offshore, pharmaceutical, medical and food applications
PNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
All rights reserved. Copyright Jouka Oy. Ver. 2 (2007).
TABLE OF CONTENTS Decisive benefi ts............................ 3-5 Aluminium valves............................. 6 Steel valves................................ 7 Stainless steel valves...........................
Camlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications
Snaplock Camlock Couplings The original Snaplock quick release coupling The tried & trusted cam coupling with the high reputation of the Snaplock brand name offering additional features to our standard
BALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler Material Maximum working pressure Test pressure Minimum Burs Pressure uminium 16 bar / 232 psi 24 bar / 348 psi 80 bar / 1160
ECT Applications. Features
Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The economical pressure
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2 way angle seat globe valve has a low maintenance aluminium piston actuator. The valve spindle is sealed by a selfadjusting
DN crimping diameter (guide values) [mm] 2 7,0 4 9,9
![DN crimping diameter (guide values) [mm] 2 7,0 4 9,9](/thumbs/78/78659247.jpg "DN crimping diameter (guide values) [mm] 2 7,0 4 9,9")
ØD hose hose PN pricked* ød part no. 2 400 bar yes 5 9-946-02-00-012 2 630 bar - 5 9-946-02-00-020 2 630 bar yes 5 9-946-02-01-020 4 550 bar yes 8 9-946-04-00-010 *for inert gases technical data of the
SCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817.
SCREW HOSE COUPLINGS B.1. STANDARD LMC s screw hose couplings with a smooth hose shank comply with EN 14420-5 / DIN 2817. OPERATION Screw hose couplings are used to connect hoses with male or female BSP,
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
FLAT FACE COUPLINGS FIRG SERIES FLAT FACE, QUICK RELEASE HYDRAULIC COUPLINGS PREMIER RANGE INTRODUCTION ADVANTAGES APPLICATIONS OPERATION
FLAT FACE COUPLINGS FIRG SERIES PREMIER RANGE INTRODUCTION Holmbury FIRG Series couplings were first introduced in 1982. Their early success was due to good performance, long life and competitive prices.
VÁLVULA BOLA BALL VALVE VANNE À BOULE
VANNE À BOULE www.inoxpa.com ÍNDICE / INDEX VÁLVULA BOLA VANNE À BOULE Conexiones / Connections / Connexions: DIN 11850 (Serie2) 4 DIN 11851 5 OD 9 SMS 12 ACCIONAMIENTO MANUAL MANUAL DRIVE COMMANDE MANUELLE
Safety break-away couplings Breaking bolt series
Safety break-away couplings Breaking bolt series 1 How it works before and after emergency disconnect The SBCouplings, safety break-away couplings has three external break bolts. In the case of axial tension
R 159. Duty cycle. ED 100%; ED 60%(90 C) Direzione del fluido Unidirezionale Flow direction Unidirectional Diametro di passaggio DN 8 mm.
Elettrovalvola Serie R R 159 Rpe s.r.l. Via S. Ambrogio, 3 22070 Carbonate (CO) Italy Tel. +39 0331832515 Fax +39 0331832501 www.rpesrl.it CLASSIFICAZIONE CLASSIFICATION Tipologia Semplice Type Single
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
Connection Ports: 3/4 1 1/4 BSP (other thread options on request)
HYDRAULIC FILTRATION Medium pressure, in line spin-on filters Technical Information Pressure: Max working (acc. to NFPA T 3.10.17): FA-4-1x: 34,5 bar (500 psi) FA-4-21: 24 bar (348 psi) Burst (acc. to
HIT PRODUCTS CORPORATION
17 15 12 10 8 6 4 PROLINE ADJUSTABLE ARC NOZZLES SPANISH Available in 4, 6, 8, 10, 12, 15 and 17 radius Adjustable from 20 to 360 degrees Matched precipitation rates Color coded for easy radius identification
valvole ISO 5599/1 taglia 1
valvole ISO 5599/1 taglia 1 ISO 5599/1 valves - size 1 Valvole a spola 5/-5/3 5/-5/3 spool valves Montaggio su basi modulari o a posti fissi Installation on manifolds or multiple sub-bases Azionatore manuale
QUICK CONNECT TECHNOLOGY. Water Pneumatic Hydraulic Electrical Accessories TYPE QUICK CONNECT TECHNOLOGY
QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 464.0 4 QUICK CONNECT TECHNOOGY 464.0 / SCD&D QUICK COUPINGS FOR PNEUMATIC www.rtctec.com Compatible Kompatibilität
Sez./Section W Complementi valvole e corpi standard Valve complements, standard body
Sez./Section W Complementi valvole e corpi standard Valve complements, standard body Raccordi orientabili e kit di fissaggio per FPD...RO Sono raccordi ad occhio con tubi diam.12 mm per valvole FPD...RO,