Index. Vorschweißflansche ab Seite 119 Welding neck flanges from Page 119. Blindflansche ab Seite 123 Blind flanges from Page 123
|
|
|
- Shawn Todd
- 5 years ago
- Views:
Transcription
1 Flansche Flanges
2 Index Vorschweißflansche ab Seite 119 Welding neck flanges from Page 119 Blindflansche ab Seite 123 Blind flanges from Page 123 Lose Flansche ab Seite 125 Loose flanges from Page 125 Glatte Flansche ab Seite 130 Plain flanges from Page 130 Gewindeflansche ab Seite 134 Threaded flanges from Page
3 Flansche / Flanges Vorschweißflansch, DIN 2633 PN, DIN 2635 PN 40, Form C/2559, V-Naht, DIN EN Typ 11, Form B1, AD2000-W2, W9, W10 Welding neck flange, DIN 2633 PN, DIN 2635PN 40, form C/2559, V-weld, DIN EN type 11, form B1, AD2000-W2, W9, W10 DN Rohran- PN D b K h 1 d 3 s h 2 d 4 f Gew. d 2 kg/ EN schlußmaß Stk Artikel-Nr. Artikel-Nr. Artikel-Nr. Dim. thread holes kg/pc Article-No. Article-No. Article-No , , M , ** , , M , * 36342* 20 26, , M , ** , , M , * 36343* 25 33, , M , ** , , M , * 36344* 32 42, , M , ** , , M , * 36345* 40 48, , M , ** , , M , * 36346* 50 60, , M , * 36325* 36326* 50 60, , M , * 65 76, , M , * 36327* 36328* 65 76, , M , * 80 88, , M , * 29510* 36329* 80 88, , M , * , , M , ** , , M , * 36319* 36320* , , M , * * DIN/EN ** DIN Löcher Alle angegebenen Nicht aufgeführte Maße/Zeichnungen Abmessungen sind und ca-angaben Werkstoffe und auf können Anfrage eventuell abweichen All dimensions/drawings Not listed dimensions are approximate and qualities and on may request deviate from specifications
4 Vorschweißflansch, DIN 2633 PN, DIN 2635 PN 40, Form C/2559, V-Naht, DIN EN Typ 11, Form B1, AD2000-W2, W9, W10 Welding neck flange, DIN 2633 PN, DIN 2635PN 40, form C/2559, V-weld, DIN EN type 11, form B1, AD2000-W2, W9, W10 DN Rohran- PN D b K h 1 d 3 s h 2 d 4 f Gew. d 2 kg/ EN schlußmaß Stk Artikel-Nr. Artikel-Nr. Artikel-Nr. Dim. thread holes kg/pc Article-No. Article-No. Article-No , , M , * 29513* 36321* , , M , * , , M , ** 150 8, , M , * * 150 8, , M , * , , M , * 29530** 29535** , , M , * 36324* , , M , * , , M , * 29484* , , M , * , , M , * 29499* , , M , * 29537* , , M , * 29536* , , M , * 29538* , , M , ** Löcher * DIN/EN ** DIN Alle angegebenen Maße/Zeichnungen sind ca-angaben und können eventuell abweichen All dimensions/drawings are approximate and may deviate from specifications 120
5 Flansche / Flanges Vorschweißflansch, DIN EN Typ 11, Form B1, S-Maß reduziert, V-Naht, AD2000-W2, W9, W10 Welding neck flange, DIN EN Typ 11, Form B1, reduced s-dimension, V-weld, AD2000-W2, W9, W10 DN Rohran- PN D b K h1 d3 s r h2 d4 f Gew. d 2 Löcher kg/ Stk EN 4571 schlußmaß Artikel-Nr. Dim. thread holes kg/pc Article-No , , M , , , M , , , M , Nicht aufgeführte Abmessungen und Werkstoffe auf Anfrage Not listed dimensions and qualities on request 121
6 Vorschweißflansch Maschinenschweißer / I-Naht PN -M, WN IGR , Form C, AD2000-W2, W9, W10 PN 40-M, WN IGR , Form C, AD2000-W2, W9, W10 Welding neck flange for machine welding / I-weld PN -M, WN IGR , Form C, AD2000-W2, W9, W10 PN 40-M, WN IGR , Form C, AD2000-W2, W9, W10 DN Rohran- PN D b K h1 d3 s r h2 d4 f Gew. d 2 Löcher kg/ Stk EN 4571 schlußmaß Artikel-Nr. Dim. thread holes kg/pc Article-No ,30 -M , M , ,30 40-M , M , ,90 -M , M , ,70 -M , M , ,70 40-M , M , ,40 -M , M , ,40 40-M , M , ,30 -M , M , ,30 40-M , M , ,30 -M , M , ,30 40-M , M , ,10 -M , M , ,10 40-M , M , ,90 -M , M , ,90 40-M , M , ,30 -M , M , ,30 40-M , M , ,70 -M , M , ,30 -M , M , ,30 40-M , M , Alle angegebenen Maße/Zeichnungen sind ca-angaben und können eventuell abweichen All dimensions/drawings are approximate and may deviate from specifications 122
7 Flansche / Flanges Blindflansch DIN 2527/2528/2519/2526 Form B, PN 10//40, DIN EN , Typ 5, Form A, AD2000-W2, W9, W10 Blind flange DIN 2527/2528/2519/2526 Form B, PN 10//40, DIN EN , Typ 5, Form A, AD2000-W2, W9, W10 DN PN D b K Gewinde d 2 Löcher kg/stk EN 4541 EN 4571 Artikel-Nr. Artikel-Nr. thread holes kg/pc ,00,00 65,00 M12 14,00 4,00 0, ,00 18,00 75,00 M12 14,00 4,00 1, ,00 18,00 85,00 M12 14,00 4,00 1, ,00 18,00 100,00 M 18,00 4,00 2, ,00 18,00 110,00 M 18,00 4,00 2, , , , ,00 235,00 250,00 270,00 285,00 300,00 18,00 20,00 18,00 22,00 20,00 24,00 20,00 24,00 22,00 26,00 22,00 28,00 125,00 M 18,00 4,00 145,00 M 18,00 8,00 0,00 M 18,00 8,00 180,00 190,00 210,00 220,00 240,00 250,00 M M20 M M24 M20 M24 18,00 22,00 18,00 26,00 22,00 26, ,00 24,00 295,00 M20 22,00 8,00 8,00 8,00 8,00 12,00 2,880 3,200 3,510 4,290 4,610 5,540 5,650 7,600 8,130 10,800 10,500 14,600,500, ** *** 29372** 35622*** 29368** 34520*** 29365** 34521*** 29362** 34522*** 29360** 35621*** 29359** 35623*** 29358** 35624*** 29350** 35625*** 29351** 35626*** 29363* 35615*** 35627*** 29369* 356*** 35628*** 29364* 35617*** 35629*** 29370* 35610*** 35618*** 29371* 35611*** 35619** 29367* 35612*** 35620*** 29366* 35609*** 35614*** ,00 26,00 350,00 M20 22,00 12,00 24, * 29378* ,00 26,00 400,00 M20 22,00 12,00 30, * 29376* ,00 26,00 515,00 M24 26,00,00 49, * 33874* * DIN/EN ** DIN *** EN Nicht aufgeführte Abmessungen und Werkstoffe auf Anfrage Not listed dimensions and qualities on request 123
8 Blindflansch ähnlich DIN 2527/B, PN 10/, EN Typ 05/A, mit reduzierter Blattstärke Blind flange similar to DIN 2527/B, PN 10/, EN Typ 05/A, reduced thickness DN PN D b K Gewinde d 2 Löcher kg/stk AISI 304L EN 4571 Artikel-Nr. Artikel-Nr. thread holes kg/pc 50 5,00 10,00 125,00 M 18,00 4,00 1, * 29385* ,00 10,00 145,00 M 18,00 4,00 2, * 29383* ,00 10,00 0,00 M 18,00 8,00 2, * ,00 10,00 180,00 M 18,00 8,00 2, * ,00 12,00 210,00 M 18,00 8,00 4, * 29375* ,00 12,00 240,00 M20 22,00 8,00 5, * 29381* ,00 15,00 295,00 M20 22,00 8,00 9, * ,00 15,00 350,00 M20 22,00 12,00 13, * 29475* ,00 15,00 400,00 M20 22,00 12,00 17, * 29388* ,00 15,00 460,00 M20 22,00,00 21, * ,00 15,00 515,00 M24 26,00,00 28, * 29387* ,00 15,00 620,00 M24 26,00 20,00 40, * * DIN/EN Alle angegebenen Maße/Zeichnungen sind ca-angaben und können eventuell abweichen All dimensions/drawings are approximate and may deviate from specifications 124
9 Flansche / Flanges Loser Flansch DIN 2642, PN 10 Loose flange DIN 2642, PN 10 DN Rohran- D d 6 b k e Gewinde d 2 Löcher kg/stk EN 4541 EN 4571 schlußmaß Artikel-Nr. Artikel-Nr. d 1 thread holes kg/pc Article-No. Article-No ,30 95,00 24,00 14,00 65,00 3,00 M12 14,00 4,00 0, ,90 105,00 30,00 14,00 75,00 3,00 M12 14,00 4,00 0, ,70 115,00 36,00,00 85,00 4,00 M12 14,00 4,00 1, ,40 140,00 46,00,00 100,00 4,00 M 18,00 4,00 1, ,30 150,00 54,00,00 110,00 4,00 M 18,00 4,00 1, ,30 5,00 65,00,00 125,00 5,00 M 18,00 4,00 2, ,10 185,00 81,00,00 145,00 5,00 M 18,00 4,00 2, ,90 200,00 94,00 18,00 0,00 5,00 M 18,00 8,00 3, ,30 220,00 119,00 18,00 180,00 5,00 M 18,00 8,00 3, ,70 250,00 145,00 18,00 210,00 5,00 M 18,00 8,00 4, ,30 285,00 173,00 18,00 240,00 5,00 M20 22,00 8,00 5, ,10 340,00 225,00 20,00 295,00 5,00 M20 22,00 8,00 7, ,00 395,00 279,00 22,00 350,00 5,00 M20 22,00 12,00 10, ,90 445,00 329,00 26,00 400,00 5,00 M20 22,00 12,00 14, ,60 505,00 362,00 28,00 460,00 6,00 M20 22,00,00 18, ,40 565,00 413,00 32,00 515,00 6,00 M24 26,00,00 23, Nicht aufgeführte Abmessungen und Werkstoffe auf Anfrage Not listed dimensions and qualities on request 125
10 Loser Flansch aus Blech gepresst, DIN 2642 (EN Typ2), PN 10 Loose flange pressed from sheet, DIN 2642 (EN Typ 2), PN 10 DN Rohran- D d d 5 k b 1 Gewinde d 2 Löcher kg/stk EN 4301 EN 4404 schlußmaß Artikel-Nr. Artikel-Nr. Dim. thread holes kg/pc Article-No. Article-No ,30 95,00 38,00 24,00 65,00 11,50 M12 13,50 4,00 0, ,90 105,00 48,00 30,00 75,00 14,00 M12 13,50 4,00 0, ,70 115,00 53,00 38,00 85,00,00 M12 13,50 4,00 0, ,40 140,00 68,00 46,00 100,00,50 M 17,50 4,00 0, ,30 150,00 77,00 54,00 110,00 18,00 M 17,50 4,00 0, ,30 5,00 91,00 65,00 125,00 20,00 M 17,50 4,00 0, ,10 185,00 108,00 81,00 145,00 22,00 M 17,50 4,00 1, ,90 200,00 123,00 94,00 0,00 23,00 M 17,50 8,00 1, ,30 220,00 141,00 119,00 180,00 24,00 M 17,50 8,00 1, ,70 250,00 8,00 145,00 210,00 25,50 M 17,50 8,00 2, ,30 285,00 192,00 173,00 240,00 27,00 M20 21,50 8,00 2, ,10 340,00 245,00 225,00 295,00 31,00 M20 21,50 8,00 4, ,00 395,00 295,00 276,00 350,00 34,00 M20 21,50 12,00 6, Alle angegebenen Maße/Zeichnungen sind ca-angaben und können eventuell abweichen All dimensions/drawings are approximate and may deviate from specifications 126
11 Flansche / Flanges Loser Flansch aus Aluminium PN 10, DIN 2642, blank (Typ A+C) oder beschichtet (Typ A+C) Loose flange of aluminum PN 10, DIN 2642, bright (type A+C) or coated (type A+C) DN Dim. blank beschichtet in mm Artikel-Nr. Artikel-Nr. D d 6 b k e Gewinde d 2 Löcher kg/stk d 1 Article-No. Article-No. thread holes kg/pc 15 21, ,00 24,00 14,00 65,00 3,00 M12 14,0 4 0, , ,00 30,00 14,00 75,00 3,00 M12 14,0 4 0, , ,00 33,00,00 85,00 4,00 M12 14,0 4 0, , ,00 36,00,00 85,00 4,00 M12 14,0 4 0, , ,00 46,00,00 100,00 4,00 M 18,0 4 0, , ,00 50,00,00 110,00 4,00 M 18,0 4 0, , ,00 54,00,00 110,00 4,00 M 18,0 4 0, , ,00 62,00,00 125,00 5,00 M 18,0 4 0, , ,00 65,00,00 125,00 5,00 M 18,0 4 0, , ,00 75,00,00 145,00 5,00 M 18,0 4 0, , ,00 73,00,00 145,00 5,00 M 18,0 4 0, , ,00 81,00,00 145,00 5,00 M 18,0 4 0, , ,00 90,00 18,00 0,00 5,00 M 18,0 8 1, , ,00 94,00 18,00 0,00 5,00 M 18,0 8 1, , ,00 111,00 18,00 180,00 5,00 M 18,0 8 1, , ,00 113,00 18,00 180,00 5,00 M 18,0 8 1, , ,00 119,00 18,00 180,00 5,00 M 18,0 8 1, , ,00 136,00 18,00 210,00 5,00 M 18,0 8 1, , ,00 145,00 18,00 210,00 5,00 M 18,0 8 1,800 Nicht aufgeführte Abmessungen und Werkstoffe auf Anfrage Not listed dimensions and qualities on request 127
12 Loser Flansch aus Aluminium PN 10, DIN 2642, blank (Typ A+C) oder beschichtet (Typ A+C) Loose flange of aluminum PN 10, DIN 2642, bright (type A+C) or coated (type A+C) DN Dim. blank beschichtet in mm Artikel-Nr. Artikel-Nr. D d 6 b k e Gewinde d 2 Löcher kg/stk d 1 Article-No. Article-No. thread holes kg/pc , ,00 1,00 18,00 240,00 5,00 M20 22,0 8 2, , ,00 4,00 18,00 240,00 5,00 M20 22,0 8 2, , ,00 173,00 18,00 240,00 5,00 M20 22,0 8 2, , ,00 212,00 20,00 295,00 5,00 M20 22,0 8 3, , ,00 225,00 20,00 295,00 5,00 M20 22,0 8 3, , ,00 264,00 22,00 350,00 5,00 M20 22,0 12 4, , ,00 279,00 22,00 350,00 5,00 M20 22,0 12 4, , ,00 312,00 26,00 400,00 5,00 M20 22,0 12 5, , ,00 329,00 26,00 400,00 5,00 M20 22,0 12 5, , ,00 362,00 28,00 460,00 6,00 M20 22,0 5, , ,00 413,00 32,00 515,00 6,00 M24 26,0 7, , ,00 465,00 36,00 565,00 6,00 M24 26,0 9,044 Alle angegebenen Maße/Zeichnungen sind ca-angaben und können eventuell abweichen All dimensions/drawings are approximate and may deviate from specifications 128
13 Flansche / Flanges Loser Flansch ähnlich DIN 2642, PN 10, mit reduzierter Blattstärke Loose flange similar to DIN 2642, PN 10, reduced thickness DN Rohran- D d 6 b k e Gewinde d 2 Löcher kg/stk AISI 304L EN 4571 schlußmaß Artikel-Nr. Artikel-Nr. d 1 thread holes kg/pc Article-No. Article-No ,00 5,00 55,00 10,00 125,00 5,00 M 18,00 4,00 1, ,30 5,00 65,00 10,00 125,00 5,00 M 18,00 4,00 1, ,10 185,00 81,00 10,00 145,00 5,00 M 18,00 4,00 1, ,00 200,00 85,20 10,00 0,00 5,00 M 18,00 8,00 1, ,90 200,00 94,00 10,00 0,00 5,00 M 18,00 8,00 1, ,00 220,00 105,60 10,00 180,00 5,00 M 18,00 8,00 3, ,30 220,00 119,00 10,00 180,00 5,00 M 18,00 8,00 2, ,00 250,00 130,80 12,00 210,00 5,00 M 18,00 8,00 3, ,70 250,00 145,00 12,00 210,00 5,00 M 18,00 8,00 2, ,00 285,00 156,20 12,00 240,00 5,00 M20 22,00 8,00 3, ,30 285,00 173,00 12,00 240,00 5,00 M20 22,00 8,00 3, ,00 340,00 206,80 15,00 295,00 5,00 M20 22,00 8,00 5, ,10 340,00 225,00 15,00 295,00 5,00 M20 22,00 8,00 5, ,00 395,00 260,00 15,00 350,00 5,00 M20 22,00 12,00 7, ,00 395,00 279,00 15,00 350,00 5,00 M20 22,00 12,00 7, ,90 445,00 329,00 15,00 400,00 5,00 M20 22,00 12,00 8, ,60 505,00 362,00 15,00 460,00 6,00 M20 22,00,00 9, ,40 565,00 413,00 15,00 515,00 6,00 M24 26,00,00 12, ,00 670,00 517,00 15,00 620,00 6,00 M24 26,00 20,00 14, ,00 780,00 618,00 20,00 725,00 7,00 M27 30,00 20,00 25, Nicht aufgeführte Abmessungen und Werkstoffe auf Anfrage Not listed dimensions and qualities on request 129
14 Glatter Flansch DIN 2576, PN 10 Plain flange DIN 2576, PN 10 DN Rohran- D d 5 b k Gewinde d 2 Löcher kg/stk EN 4541 EN 4571 schlußmaß Artikel-Nr. Artikel-Nr. d 1 thread holes kg/pc Article-No. Article-No ,30 95,00 22,00 14,00 65,00 M12 14,00 4,00 0, ,90 105,00 27,60,00 75,00 M12 14,00 4,00 0, ,70 115,00 34,40,00 85,00 M12 14,00 4,00 1, ,40 140,00 43,10,00 100,00 M 18,00 4,00 1, ,30 150,00 49,00,00 110,00 M 18,00 4,00 1, ,30 5,00 61,10 18,00 125,00 M 18,00 4,00 2, ,10 185,00 77,10 18,00 145,00 M 18,00 4,00 3, ,90 200,00 90,30 20,00 0,00 M 18,00 8,00 3, ,30 220,00 115,90 20,00 180,00 M 18,00 8,00 4, ,70 250,00 141,60 22,00 210,00 M 18,00 8,00 5, ,30 285,00 170,50 22,00 240,00 M20 22,00 8,00 6, ,10 340,00 221,80 24,00 295,00 M20 22,00 8,00 9, ,00 395,00 276,20 26,00 350,00 M20 22,00 12,00 11, ,90 445,00 327,60 26,00 400,00 M20 22,00 12,00 13, ,60 505,00 359,70 28,00 460,00 M20 22,00,00 20, ,40 565,00 411,00 32,00 151,00 M24 26,00,00 27, Alle angegebenen Maße/Zeichnungen sind ca-angaben und können eventuell abweichen All dimensions/drawings are approximate and may deviate from specifications 130
15 Flansche / Flanges Glatter Flansch DIN 2576, Form B, PN 10, AD 2000-W2, W9, W10 Plain flange DIN 2576, Form B, PN 10, AD 2000-W2, W9, W10 DN Rohran- D d 5 b k Gewinde d 2 Löcher kg/stk EN 4541 schlußmaß Artikel-Nr. d 1 thread holes kg/pc Article-No ,00 220,00 109,60 20,00 180,00 M 18,00 8,00 4, (106) 4, ,00 250,00 134,80 22,00 210,00 M 18,00 8,00 5, (156) 7, Nicht aufgeführte Abmessungen und Werkstoffe auf Anfrage Not listed dimensions and qualities on request 131
16 Glatter Flansch EN , Typ 1, PN /PN 40 Plain flange EN , type 1, PN /PN40 DN Rohran- PN D b k Gewinde d 2 Löcher kg/stk EN 4541 schlußmaß Artikel-Nr. d 1 thread holes kg/pc Article-No , ,00 14,00 65,00 M12 14,00 4,00 0, , ,00,00 75,00 M12 14,00 4,00 0, , ,00,00 85,00 M12 14,00 4,00 1, , ,00 18,00 100,00 M 18,00 4,00 1, , ,00 18,00 110,00 M 18,00 4,00 2, ,50 5,00 20,00 125,00 M 18,00 4,00 2, ,50 185,00 20,00 145,00 M 18,00 8,00 3, ,50 200,00 20,00 0,00 M 18,00 8,00 3, ,00 220,00 22,00 180,00 M 18,00 8,00 4, ,50 250,00 22,00 210,00 M 18,00 8,00 5, ,50 285,00 24,00 240,00 M20 22,00 8,00 7, ,50 340,00 26,00 295,00 M20 22,00 12,00 9, ,50 405,00 29,00 355,00 M24 26,00 12,00 14, ,50 460,00 32,00 410,00 M24 26,00 12,00 19, Alle angegebenen Maße/Zeichnungen sind ca-angaben und können eventuell abweichen All dimensions/drawings are approximate and may deviate from specifications 132
17 Flansche / Flanges Glatter Flansch ähnlich DIN 2576, PN 10, mit reduzierter Blattstärke Plain flange similar to DIN 2576, PN 10, reduced thickness DN Rohran- D Innen b k Gewinde d 2 Löcher kg/stk AISI 304L EN 4571 schlußmaß Artikel-Nr. Artikel-Nr. Dim. inside thread holes kg/pc Article-No. Article-No ,00 5,00 55,00 10,00 125,00 M 18,00 4,00 2, ,30 5,00 61,10 10,00 125,00 M 18,00 4,00 1, ,10 185,00 77,10 10,00 145,00 M 18,00 4,00 1, ,00 200,00 85,20 10,00 0,00 M 18,00 8,00 3, ,90 200,00 90,30 10,00 0,00 M 18,00 8,00 1, ,00 220,00 105,60 10,00 180,00 M 18,00 8,00 2, ,30 220,00 115,90 10,00 180,00 M 18,00 8,00 2, ,00 250,00 130,80 12,00 210,00 M 18,00 8,00 2, ,70 250,00 141,60 12,00 210,00 M 18,00 8,00 2, ,00 285,00 156,20 12,00 240,00 M20 22,00 8,00 3, ,30 285,00 170,50 12,00 240,00 M20 22,00 8,00 3, ,00 340,00 206,80 15,00 295,00 M20 22,00 8,00 5, ,10 340,00 221,80 15,00 295,00 M20 22,00 8,00 5, ,00 395,00 260,00 15,00 350,00 M20 22,00 12,00 6, ,00 395,00 276,20 15,00 350,00 M20 22,00 12,00 6, ,90 445,00 327,60 15,00 400,00 M20 22,00 12,00 7, ,60 505,00 359,70 15,00 460,00 M20 22,00,00 11, ,40 565,00 411,00 15,00 515,00 M24 26,00,00 13, ,00 670,00 513,60 15,00 620,00 M24 26,00 20,00, ,00 780,00 618,00 20,00 725,00 M27 30,00 20,00 25, Nicht aufgeführte Abmessungen und Werkstoffe auf Anfrage Not listed dimensions and qualities on request 133
18 Gewindeflansch, DIN 2566C, PN Threaded flange, DIN 2566C, PN DN Rohran- Whitworth D b K h 1 d 3 d 4 f Gewinde d 2 Löcher kg/stk EN 4571 schlußmaß Rohrgewinde Artikel-Nr. Dim. threat thread holes kg/pc Article-No ,30 R 1/2 90,00 14,00 65,00 20,00 35,00 45,00 2,00 M12 14,0 4,00 0, ,90 R 3/4 105,00,00 75,00 24,00 45,00 58,00 2,00 M12 14,0 4,00 0, ,70 R 1 115,00,00 85,00 24,00 52,00 68,00 2,00 M12 14,0 4,00 1, ,40 R 1 1/4 140,00,00 100,00 26,00 60,00 78,00 2,00 M 18,0 4,00 1, ,30 R 1 1/2 150,00,00 110,00 26,00 70,00 88,00 3,00 M 18,0 4,00 1, ,30 R 2 5,00 18,00 125,00 28,00 85,00 102,00 3,00 M 18,0 4,00 2, ,10 R 2 1/2 185,00 18,00 145,00 32,00 105,00 122,00 3,00 M 18,0 4,00 3, ,90 R 3 200,00 20,00 0,00 34,00 118,00 138,00 3,00 M 18,0 8,00 4, ,30 R 4 220,00 20,00 180,00 38,00 140,00 158,00 3,00 M 18,0 8,00 4, Alle angegebenen Maße/Zeichnungen sind ca-angaben und können eventuell abweichen All dimensions/drawings are approximate and may deviate from specifications 134
FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE
4 FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE Typ/Type CS-VE/CS-EP PN 10/10 AUS GLASFASERVERSTÄRKTEM VINYLESTERHARZ (VE) ODER
)D]RQVNLNRPDGL]DãWLüHQLVXVDHSRNVLERMRPLOLHSRNVLSUDãNRPSODVWLILFLUDQMH Bušenje
![)D]RQVNLNRPDGL]DãWLüHQLVXVDHSRNVLERMRPLOLHSRNVLSUDãNRPSODVWLILFLUDQMH Bušenje](/thumbs/88/115662113.jpg ")D]RQVNLNRPDGL]DãWLüHQLVXVDHSRNVLERMRPLOLHSRNVLSUDãNRPSODVWLILFLUDQMH Bušenje")
Primjena )D]RQVNLNRPDGLXSRWUHEOMDYDMXVH]DVSDMDQMHSODVWLþQLK39&',1XFLMHYRYRGQLPVLVWHPLPD]DYRGXLQHXWUDOQH medije Radni tlak 10bara Dozvoljeni radni tlak 16 bara maks. Radna temperatrua 70ºC maks. MATERIJAL
DIN Aseptik Klemmverbindung DIN Aseptic Clamp Union
Datenblatt Datasheet DIN11864-3 Aseptik Klemmverbindung DIN11864 3 Aseptic Clamp Union liquitec AG Industrie Neuhof 54 CH-3422 Kirchberg T +41 55 450 83 00 F +41 55 450 83 01 info@liquitec.ch www.liquitec.ch
iberdur INHALTSVERZEICHNIS TABLE OF CONTENTS SOMMAIRE 2.1 EINLEITUNG INTRODUCTION INTRODUCTION 2 / 1
INHLTSRZEIHNIS TLE OF ONTENTS SOMMIRE 2.1 EINLEITUNG INTRODUTION INTRODUTION 2.2 MESSUNGEN DIMENSIONS DIMENSIONS OGEN ELOW OUDE T-STÜK TEE-FITTING TE REDUZIERTES-T-STÜK REDUED-TEE-FITTING TE REDUIT ROHRSTTEL
Flange holes are bored according to DIN 28605: up to DN 150 for PN 16 (PN 16 on special request).
Primjena Fazonski komadi upotrebljavaju se za spajanje plastičnih PVC DIN 8061/8062 u cijevovodnim sistemima za vodu i neutralne medije Radni tlak 10bara Dozvoljeni radni tlak 16 bara maks. Radna temperatrua
Outdoor Bushings DIN kv / A Freiluft Durchführungen DIN kv / A
Outdoor Bushings DIN 0 kv / 0-0 A Freiluft Durchführungen DIN 0 kv / 0-0 A Qty. 0 Top porcelain A Bottom porcelain B Brass stem Brass washer E Brass washer G Ring gasket J Plain gasket (M) Flange gasket
Din En E. Din En E
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with din en 250 2014 07 e.
TECHNISCHE DATEN TYP HNZ Hydraulik Differentialzylinder mit Endlagendämpfung TECHNICAL DATA. Hydraulic differential cylinder with end position damping
TECHNISCHE DATEN TYP HNZ Hydraulik Differentialzylinder mit Endlagendämpfung TECHNICAL DATA TYP HNZ Hydraulic differential cylinder with end position damping Hydraulik Differentialzylinder mit einstellbarer
Tri-Clamp ferrules & blanks
Tri-Clamp ferrules & blanks Generally, Tri-Clamp ferrules, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404 material. The material conforms typically to ASTM
Thermometer wih Remote Transmission Ø 100 mm Thermometer mit Fernübertragung Ø 100 mm
Thermometer wih Remote Transmission Ø 100 mm Thermometer mit Fernübertragung Ø 100 mm No. 100601 Weight: 1180 gr Front Flange Bottom Outlet No. 100602 Weight: 1 gr CONSTRCTIVE SPECIFICATIONS TECHNICA SPECIFICATIONS
SYSTEM DELTA BRZI SPOJ (za spajanje cijevi) SYSTEM DELTA FAST CONNECTION SYSTEM DELTA DIE SCHNELLE VERBINDUNG
SYSTEM DELTA BRZI SPOJ (za spajanje cijevi) SYSTEM DELTA FAST CONNECTION SYSTEM DELTA DIE SCHNELLE VERBINDUNG System DELTA fazone s pokretljivim priključkom izrađene su od duktilnog lijevanog željeza (GGG
SE-0156-BO-L TFSE-0156-G 79 x 51 mm. SE-0101-BO-L TFSE-0101-G/-K 66 x 46 mm. 415 x 320 mm x 310 mm. 320 x 304 mm. 16 5x6
SE Eier gerillt / SE-type Eggs with lines Ei, gerillt Egg with lines Ei, gerillt Egg with lines Formen für Hohlkörper-Schleudern Moulds for spinning machines Ei, bork Egg, bark style SE-059-A-L TFSE-059-G
FALCO AF3009. en Spare parts list Tire changer Equipment. Parti di ricambio Smontagomme
FALCO AF009 it Parti di ricambio Smontagomme en Spare parts list Tire changer Equipment 9 0 870 00-07- Hinweise / Notes / Remarques / Advertencias FALCO AF009 Diese Ersatzteilliste enthält zusätzlich zu
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Serie Series L-BV5 L_300 Flüssigkeitsringpumpen Liquid ring pumps 3 AC; 50/60 Hz 3 AC; 50/60 Hz Vakuumbetrieb Vacuum operation Typen Types 2BV5
PAV1 ISO A ACCIAIO STEEL STAHL ACIER. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques. Norme: ISO A
ISO A ACCIAIO STEEL STAHL ACIER 74 Caratteristiche tecniche I Nominal size Max working pressure Rated flow Max flow rate Min burst pressure DNP BG ISO mm Mpa l/min l/min MPa MPa MPa cc 06 1 6.3 5 35 12
Page 6. Page 6. Page 6. Page 7. Page 8. Page 9. Page 10 / 11
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
Hygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
Applications. NG 6 according to DIN 24340/ISO 4401 CETOP RP 121 H
Seated valves Type WV700 Features Direct operated Leakage free High duty cycle Long lifetime through hardened poppets and valve seats Positive overlap (exceptions see product information) Available as
Grooved gaskets. Types of gaskets
Types of gaskets have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our grooved gaskets can be found in conventional power plants as well as in the primary
Pneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
TOE-MN / MA / MI Series. Heat transfer pumps for heat transfer oils up to 350 C
TOE-MN / MA / MI Series Heat transfer pumps for heat transfer oils up to 350 C with magnetic coupling volute casing PN 16 bearing brackets 360 and 470 2 Pumps for heat transfer technology Main applications
VERTICAL MULTISTAGE PUMPS SSV-F Hz
VERTICAL MULTISTAGE PUMPS SSV-F 1-3 - 6-1 - 15 5Hz TABLE OF HYDRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATED POWER H1 Q = DELIVERY l/min 8,3 16,7, 33,3 2 5, 58,3 67 75, m³/h,5 1 1,5 2 2,5 3 3,5,5 kw HP Bar
Übersicht Führungsprofile aus ISO-LEN Overview Guide Profiles made of ISO-LEN
F Ü H R U N G S P R O F I L E F Ü R K E T T E N G U I D E - P R O F I L E S F O R C H A I N S Übersicht Führungsprofile aus ISO-LEN Overview Guide Profiles made of ISO-LEN Typ TI Typ TI-Duplex Typ CIF
Company name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 14/03/2017
Position Qty. Description 1 CR 32-3-2 A-F-A-E-HQQE Phone: 8 61 Date: 1/3/217 Product No.: 961221 Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range:
English Français Deutsch Italiano Español Dome head Tête plate Flachrundkopf Testa tonda Cabeza alomada Low carbon steel* Stahl*
Chobert 1121 English Français Deutsch Italiano Español Dome head Tête plate Flachrundkopf Testa tonda Cabeza alomada Low carbon steel* Zinc plated, thickness 10µm Clear trivalent passivated Acier bas carbone*
Company name: GRUNDFOS (Singapore) Pte. Ltd. Created by: Angie Ang Phone: Date: 23/03/2017
Position Qty. Description 1 CR 15-7 A-F-A-E-HQQE Date: 3/3/17 Product No.: On request Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range: -.. 1 C
Product catalogue. Mechanical accessories for pumps and mixers
Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15
Company Standard Mounting Instructions for Type Valves with Type AT Actuator
Mounting Instructions for Type 72 82-62 Valves with Type AT Actuator Introduction These installation instructions contain important information on the installation, functioning, maintenance and storage
Assembly instruction APD 6-/7-way
Seite 1 von 14 Fixed connector Jam nut receptacle Assembly instruction Free connector Fixed connector Flange receptacle APD-1AP6, 6-way for stamped contacts APD-1AP6-EP 6-way for press in contacts APD-1AP7-EP
Steckverbinder DIN - EN Connectors DIN - EN
Steckverbinder DIN - EN Connectors DIN - EN Steckverbinder A Bauform A 3 oder 4 - polig Connector A Form A 3 or 4 - poles DIN 43 650 / EN 175301-803 Max. Strom Max. current Max. Leiterquerschnitt Max.
Axial piston pump A10V(S)O with electro-hydraulic pressure control ED../ER..
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial piston pump A10V()O with electro-hydraulic pressure control ED../ER.. RE 92707/11.10 1/12 Replaces:
14 Rückschlagklappen. Swing check valves Clapet de non retour
02 01 14 Rückschlagklappen Swing check valves Clapet de non retour 99 17 16 15 14 13 12 03 04 11 10 09 08 07 06 05 Rückschlagklappen - Swing check valbe - Clapet de non-retour 14.01Rückschlagklappe F6
Flush-mounted pressure and level transmitters - KERAMESS KS series 100/101 -
FEATURES PRECISE MEASUREMENTS WITH AN ACCURACY OF ± 0.15% FS WITH DRY CERAMIC MEASURING CELL TURN-DOWN 10 EASY TO CLEAN AND HIGH PROTECTION CLASSES IP67 AND IP69K INTEGRATED ON-SITE DISPLAY OR EXTERNAL
UPS32-60 F B 1x V PN6/10
GRUNDFOS DATA BOOLET UPS32-60 F B 1x230-240V PN6/10 Grundfos Pump 96401797 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/upsb2/96401797/ups-32-60-f-b.html
DEUTSCHE NORM June 2002
DEUTSCHE NORM June 2002 Flanges and their joints Circular flanges for pipes, valves, fittings and accessories Part 1: Steel flanges, PN designated English version of DIN EN 1092-1 { EN 1092-1 ICS 23.040.60
DM BOARD METALLIC USED
DE/GB DE Design meets Function - SIBU I BOARD COLLECTION bietet erstmalig trendige SIBU DESIGN Dekore fertig verpresst auf MDF-Platten an. Die aufgrund großer Nachfrage entwickelte SIBU I BOARD COLLECTION
TOE-GN / GA / GI Series. Heat transfer pumps for heat transfer oils up to 350 C and hot water up to 160 C
TOE-GN / GA / GI Series Heat transfer pumps for heat transfer oils up to 350 C and hot water up to 160 C with uncooled mechanical seals volute casing PN 16 bearing brackets 360 and 470 2 Pumps for heat
NEW. the right key to your engines. Brochure for Gasket Sets
NEW the right key to your engines Brochure for Gasket Sets 2018/19 DEUTZ 04 3004 910000 Motortyp / Engine type: BF4L913/913T BF6L... F2L912 F3L912/913 F4L912/913 F5L912 F6L912/913 Bemerkung / Details:
800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No
Type 457, 458. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metirc Units LWN E
Type 457, 458 Flanged Safety Relief Valves spring loaded Metirc Units Facts The-Safety-Valve.com LWN 468.10-E 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring
Flush-mounted pressure and level transmitters - TPF series 100/101 -
FEATURES PRECISE MEASUREMENTS WITH ± 0.15% FS WIDE RANGE OF PROCESS CONNECTIONS FOR HYGIENIC APPLICATIONS TURN-DOWN 10 VACUUM-PROOF PIEZORESISTIVE MEASURING CELL WITH STAINLESS STEEL MEMBRANE MEASURING
GRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.
GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part
ZEAL The Gauge of Quality PRECISION BIMETAL DIAL THERMOMETERS
ZEAL The Gauge of Quality PRECISION BIMETAL DIAL THERMOMETERS TRADE CATALOGUE 2005 ZEAL The genuine article since 1888 Distributer : ANSARI AGENCIES SDN.BHD. 18-A, 1st Floor, Jalan MJ/ 7, Medan Maju Jaya,
Temperature Measurement Resistance thermometers
Temperature transmitters for mounting in the connection head The following temperature transmitters are available for mounting in the connection head: SITRANS TH100 Programmable two-wire temperature transmitter
Datasheet MATRE Foam Inductors. Datasheet for MATRE Foam Inductors. 1 Contents
Datasheet for MATRE Foam Inductors 1 Contents 2 General product description... 3 3 General installation guide... 3 4 Product dimensions and performance... 3 4.1 Standard bronze housing design - threaded...4
Maße / Dimensions 3-teiliger Kugelhahn Serie DG1 3-pce ball valve series DG1 DN 8 - DN 50 voller Durchgang / full bore
DN 8 - DN 50 voller Durchgang / full bore Antriebsanschluss nach DIN 3337 / ISO 5211 - siehe Datenblatt Antriebsanschluss Mounting plate acc. to DIN 3337 / ISO 5211 - see data sheet mounting plate DN NPS
A type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
Maße Einteilige Absperrklappe Serie KG4 Dimensions One-piece butterfly valve series KG4 DN 50 - DN 300
Maße Einteilige Absperrklappe Serie KG4 Dimensions One-piece butterfly valve series KG4 DN 50 - DN 300 Baulänge: EN 558-1 Reihe 20 (DIN 3202-K1) Face to face dimension: EN 558-1 line 20 (DIN 3202-K1) Montageplatte
are the registered trade marks of Peters - Ennepetal.
AUTOMOTIVE TECHNOLOGY Replacement parts to fit Discos - Achsen 01 engineering and technology created in Germany. are the registered trade marks of Peters - Ennepetal. Published by Peters - Ennepetal. Copyright
DABOTEK. Capacitor Discharge STUDS (CD) Kondensator BOLZEN (CD) Kondensatorbolte BOLTE (CD) + Short Cycle (SC) and other weld nuts
file://c:\docume~1\boharl~1\lokale~1\temp\triakgae.htm DABOTEK Capacitor Discharge STUDS (CD) Kondensator BOLZEN (CD) Kondensatorbolte BOLTE (CD) + Short Cycle (SC) and other weld nuts E-mail: DABOTEK
TECHNISCHE DATEN TYP HDT TECHNICAL DATA. Double-acting hydraulic telescopic cylinder,
TECHNISCHE DATEN TYP HDT Hydraulisch doppeltwirkender Teleskopzylinder TECHNICAL DATA TYP HDT Double-acting hydraulic telescopic cylinder Hydraulisch doppeltwirkender Teleskopzylinder, bis zu 4 Stufen,
Index. Single needle actuator. Page. Technical information - yellow page 5.1.
Index Single needle actuator Page Technical information - yellow page.. - ctuator: Electric ME 0/UV Electromagnet.. 0 SM 0 Stepper motor.. ctuator: Hydraulic/ Pneumatic //L with or.. 0 //O with or.. /L
short name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum
with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/
600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
Angle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
Grooved Butterfly Valves
Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600
10.1 Introduction Connections Overview
Content 10.1 Introduction...10.1-1 10.2 Connections Overview...10.2-1 10.2.1 Pressure/Temperature Rating of Connection versus Safety Valve...10.2-1 10.2.2 Flanged Connections...10.2-1 10.2.3 Threaded Connections...10.2-2
Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
Company name: Created by: Phone:
Qty. Description 1 CRE 1-5 A-FJ-A-E-HQQE Date: /3/17 Product No.: On request Note! Product picture may differ from actual product The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor
2-channel analog input module; Pt100 / RTD; for resistance sensors
Printview: 2-channel analog input module; Pt00 / RTD; for resistance sensors - Item No: 70-46 2-channel analog input module; Pt00 / RTD; for resistance sensors Item No: 70-46 2-channel analog input module;
DRIVE SYSTEM. Operation and support elements made of stainless steel for chambers and water treatment works
DRIVE SYSTEM Operation and support elements made of stainless steel for chambers and water treatment works Page 1 DALMINEX www.dalminex.de info@dalminex.de DRIVE SYSTEM Foreword DALMINEX, has been producing
Am Rotböll Weiterstadt Telefax /
AC-Motors IGK/IGKU - 370W housed ac-motors, convectional-cooled technical feature large adjustment range with inverter Drives because of the fanless design (typ. approx. 3-70Hz possible) UL-certification
Butterfly valves ARI-ZIVA -Z / ARI-ZIVA -G. with notch lever. with worm gear. with electric rotary actuator rotork
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2 way angle seat globe valve has a low maintenance aluminium piston actuator. The valve spindle is sealed by a selfadjusting
piece of straight pipe with a minimum length of 25 cm. (see figure 13) For this purpose the 45 long bend is included in the Wavin AS program.
Recommendations 3.9 Sound insulation recommendations National / Local building regulations should be observed where applicable. In order to achieve optimal sound insulation it is highly recommended to
STRAUB-PLAST-PRO Technical Manual
STRAU-PLAST-PRO Technical Manual Contents STRAU-PLAST-PRO 3 Properties 3 Example 3 The full set 4 components 5 Conntectors 5 Pipe dimensions and tolerances 5 straub-plast-pro l Coupler 6 straub-plast-pro
Centres-Live Chucks Type
Centres-Live Chucks Type 300-422 Face Drivers Type 300-303 with mechanical compensation 2 4 5 6 7 3 8 9 1 Very large bearing surface. Housing moves with centre to compensate for diefferent sizes of component
DIN Metal ball valves. DEUTSCHE NORM October 1989 UDC Ball valve DIN X XXXX PN XXX - - XXX XXX -
~ ~ UDC 62.646.66-034 DEUTSCHE NORM October 989 Metal ball valves General requirements and methods of test DIN 3357 Part Kugelhähne; allgemeine Angaben für Kugelhähne aus metallischen Werkstoffen Supersedes
STAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
LEERSEITE / BLANK PAGE
LEERSEITE / BLANK PAGE d01330 Seite / Page 7-1 Revision 2, 03/01 05805 1 14 13 9 8 19 17 10 18 17 M 7 6 O 18 17 19 17 22 35 36 21 34 15 20 16 23 24 25 * 21 D 13 22 2 26 27 A 3 4 B 1 5 2 B 29 A 3 ** **
UNIVERSAL TIED EXPANSION JOINTS
UNIVERSA TIED EXPANSION JOINTS Scan this QR 64 ANSI DIN EN +600 C The movements occured in two directions can only be absorbed by using Epansion Joints. Universal tied expansion joints are made up of two
10.3 Flanged Connections acc. to EN 1092
10.3 Flanged Connections acc. to EN 1092 EN 1092 is split into two sections: - EN 1092-1 edition 09-2008 for steel flanges - EN 1092-2 edition 06-1997 for cast iron flanges EN 1092 contains dimensions
ARI-ZESA / ARI-GESA / THEA Butterfly valves
ARI-ZESA - Fig. 012 - Free of maintenance butterfly valve with elongated eyelets - soft sealed ARI-GESA - Fig. 013 - Free of maintenance butterfly valve with threaded eyelets - soft sealed / THEA Butterfly
LMK 387. Stainless Steel Probe DRUCK & TEMPERATUR LEITENBERGER GMBH. Ceramic Sensor
DRUCK & TEMPERATUR LEITENBERGER GMBH LMK 87 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... mh O up to 0... 00 mh
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
LONG STEM BALL VALVE of carbon steel with welded ends series
with welded ends 38000 series C ont R o L Description Edition 05-07-2016 Ball valve series 38000 tested according to the EN488 standard and fulfill the requirements of this standard. Tight on-off valve
Spare parts suitable for Traub
Spare parts suitable for Traub ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Ersatzteile passend für Traub Spare parts suitable for Traub ademagazin Zubehör siehe Tab. 10 oading magazine
Magnetic-inductive flow meter EPS / UMF2. Technical data sheet
Magnetic-inductive flow meter EPS / UMF2 Technical data sheet high accuracy: 0.3 % of actual maintenance-free no pressure drop numerous lining materials numerous electrode materials low-cost grounding
UPS F B 3x V PN6/10
GRUNDFOS DATA BOOKLET UPS40-180 F B 3x400-415V PN6/10 Grundfos pump 96401985 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/upsb2/96401985/ups-40-180-f-b.html
Worm gear S 345. Properties: General: Single-stage worm gear For use in combination with our motors.
S 345 Aluminium Power deviation 90 Options: Special shaft, 2nd shaft end Loading capacity Max. radial force N 100 Max. axial force N 50 Mounting Shaft diameter mm 6 Weight kg 1.2 Flange 5 1.8 0.65 10 1.9
CONSTRUCTION AND DESIGN OF INSTRUMENTS FOR FLOW, LEVEL AND TEMPERATURE
CONSTRUCTION AND DESIGN OF INSTRUMENTS FOR FLOW, LEVEL AND TEMPERATURE EMCO Liquid Level Switch LEVEL SWITCH APPLICATION The EMCO level switch is designed to control the liquid level in vessels containing
DOMIZI CHAMBER FOR LEVEL INSTRUMENTS Model : DBH-SO and DBH-WN
DOMIZI HAMBR FOR LVL INSTRUMNTS Model : DBH-SO and DBH-WN The DOMIZI hambers allow to link different level instruments (guided wave radar, torsion bars etc..) to the process, providing various benefits
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
C6TRM + C6 C6TRM C6TRM. click to Manual- laden aus www.
-edles Aluminumgehäuse für direkte Eckmontage 90 -Befestigungen sind nicht sichtbar -diverse Audio-Anschlüsse unten/oben jeweils im Eckbereich -geeignet für Beschallung und Installation: -Messen, Bistro,
Tipdressers general information
Tipdressers general information In the automotive industry resistance robot welding guns are used to weld the parts of the car body. In this automated welding process the welding current melts the car
Tubes and stiffener sleeves Use of stiffener sleeves
Tubes and stiffener sleeves Use of stiffener sleeves very thick wall thickness not recommended thicker wall thickness decreasing pressure resistance increasing wall thickness ideal wall thickness no stiffener
OVERPRESSURE SYSTEM DEB-3 OVERPRESSURE SYSTEM DEB-4. Air conditioning present
OVERPRESSURE SYSTEM DEB-3 The DEB-3 is supplied according to ZH1/184 with the following components: - Housing overpressure system DEB-3 (incl. fine dust filter according to DIN 24184 and an activ coal
DIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube
/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
DN crimping diameter (guide values) [mm] 2 7,0 4 9,9
![DN crimping diameter (guide values) [mm] 2 7,0 4 9,9](/thumbs/78/78659247.jpg "DN crimping diameter (guide values) [mm] 2 7,0 4 9,9")
ØD hose hose PN pricked* ød part no. 2 400 bar yes 5 9-946-02-00-012 2 630 bar - 5 9-946-02-00-020 2 630 bar yes 5 9-946-02-01-020 4 550 bar yes 8 9-946-04-00-010 *for inert gases technical data of the
Oil Solutions. SAE Flanges
Oil Solutions Flanges www.oilsolutions.com.au sales@oilsolutions.com.au Distributor Walter Stauffenberg GmbH & Co. KG P.O.Box 1745 D-58777 Werdohl Im Ehrenfeld 4 D-58791 Werdohl Tel. : + 49 (0) 2392 916-0
CRN3-3 A-FGJ-G-V-HQQV 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN3-3 A-FGJ-G-V-HQQV 3x23/4 5HZ Grundfos Pump 9651685 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn3/9651685/crn-3-3-a-fgj-g-v-hqqv.html
QUICK COUPLING M
2018 QUICK COUPLING M42 CONTENTS Quick coupling M42 description...2 Safety cover...3 Male coupling for welding KKV...4 Female coupling for welding KKM...4 Male coupling with hose connection KVS...5 Female
BUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
SEUT Maritime a.s. MARITIME. Sørkilen 8,1621 Fredrikstad,Norway
SEUT Maritime a.s. Sørkilen 8,1621 Fredrikstad,Norway MARITIME EE E D E T N E T N PA Manufacturer and supplier of vital parts for ship, shore and industry. BLIND FLANGE VALVES CARGO PROCESS VALVES CARGO
Strainers in stainless steel Type FIA SS
Data sheet Strainers in stainless steel Type FIA SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for high surface protection
CR3-2 A-FGJ-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR3-2 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516649 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516649/cr-3-2-a-fgj-a-e-hqqe.html
nak feeding and transporting technique
Helix feeder KWF The nak-vibration feeders operate with compensation of vibration forces, that means the vibration forces are balanced inside the appliance. The compensation of vibration forces results
CRI3-6 A-FGJ-I-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRI3-6 A-FGJ-I-E-HQQE 3x23/4 5HZ Grundfos Pump 96527892 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/cri3/96527892/cri-3-6-a-fgj-i-e-hqqe.html
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
SEMPELL. All applications of stop valves up to a Nominal Diameter of 50 mm. VA 500 Serie high-pressure Stop Valves DIN
DIN SEMPELL All applications of stop valves up to a Nominal Diameter of 50 mm. Features Bonnetless die-forged body. One piece body design with packing only. Stellited seat. Stem nut drive sealed against