TECHNISCHE DATEN TYP HNZ Hydraulik Differentialzylinder mit Endlagendämpfung TECHNICAL DATA. Hydraulic differential cylinder with end position damping

Size: px
Start display at page:

Download "TECHNISCHE DATEN TYP HNZ Hydraulik Differentialzylinder mit Endlagendämpfung TECHNICAL DATA. Hydraulic differential cylinder with end position damping"

Transcription

1 TECHNISCHE DATEN TYP HNZ Hydraulik Differentialzylinder mit Endlagendämpfung TECHNICAL DATA TYP HNZ Hydraulic differential cylinder with end position damping Hydraulik Differentialzylinder mit einstellbarer Endlagendämpfung, Kolbendurchmesser 40 bis 200 mm, Nenndruck max. 300 bar. Sonderausführung nach Kundenzeichnungen sind jederzeit möglich. Hydraulic differential cylinder with adjustable end position damping, piston diameter 40 to 200 mm, nominal pressure max 300 bar. Special versions to customers' drawings are possible at any time. Seite Modell Bauart Page Model Design 2 Typ HNZ Einzelteileliste, Werkstoffe Individual parts, Material 3 Typ HNZ F Flansch am Zylinderkopf Flange on cylinder head 4 Typ HNZ S Flansch am Zylinderboden Flange on cylinder base 5 Typ HNZ E Gewinde am Zylinderkopf Tread on the top 6 Typ HNZ L Fußbefestigung Foot mounting 7 Typ HNZ GM Schwenkzapfen Trunnion 8 Typ HNZ GH Gelenkauge am Boden Pivot eye on base Stand As of date 02.18

2 Typ HNZ Die Baureihe HNZ wurde für den Einsatz unter schwierigsten Arbeitsbedingungen in den verschiedensten Gebieten der Industrie entwickelt, wo hohe Zuverlässigkeiten gefordert werden. Robuste Konstruktionen, hergestellt durch modernste Technologie, garantieren eine lange Lebensdauer. Kolbengeschwindigkeiten von 0,5 m/sec. sind zulässig, darüber auf Anfrage. Die normale Betriebs-temperatur liegt bei -20 C bis +80 C. The HNZ Series was developed for applications under the toughest working conditions in a wide variety of fields of industry where high reliability is demanded. Sturdy designs, manufactured using the latest technology, guarantee a long service life. Piston speeds up to 0.5 m/s are permissible, higher speeds on request. The normal operating temperature lies between - 20 C and +80 C. Pos. Item Einzelteile Individual parts Werkstoff Material 1 Kolbenstange Piston rod Stahl, maßhartverchromt Steel, hard chrome-plated to size 2 Abstreifer Wiper seal NBR / Polyurethan NBR / polyurethane 3 Führungsbuchse Guide bush Rotguß Red bronze 4 Zylinderkopf Cylinder head Stahl Steel 5 Stangendichtung Rod seal NBR Gewebe NBR fabric 6 O-Ring O-ring NBR 7 Sicherungsring Retaining ring Stahl Steel 8 Zylinderrohr Cylinder barrel Stahl, gehont Steel, honed 9 Dämpfungsbuchse Damping bush Stahl Steel 10 Kolben Piston Stahl Steel 11 Kolbendichtung Piston seal NBR Gewebe NBR fabric 12 Führungsbuchse Guide bush Rotguß Red bronze 13 Kolbendichtung NBR Gewebe NBR fabric 14 Rückschlagventil Non-return valve Stahl Steel 15 O-Ring O-ring NBR 16 O-Ring O-ring NBR 17 Drosselventil Throttle valve Stahl Steel Sonderausführung z. B. Edelstahl, Viton-Dichtungen, mehrschichthartverchromte Kolbenstange, Sondergewinde an der Kolbenstange sowie nach Kundenzeichnungen sind jederzeit möglich. Special versions, e.g. stainless steel, Viton seals, multilayer hard chrome-plated piston rod, special thread on the piston rod and to customers' drawings are possible at any time.

3 Typ HNZ F Ab Kolbenstangen-Ø 55, Bohrung für Hakenschlüssel From piston rod diameter 55, bore for hook wrench WAF SW I a/f L5 L3 L4 G L6 Ab Kolben-Ø 100, mit Rückschlagventil From piston dia. 100 non-return valve E D M D4 D1 D2 L1 L2 L8 Einstellbares Drosselventil Adjustable throttle valve L + Hub I Stroke D7 D6 D5 P = Anzahl der Befestigungsbohrungen P = Number of mounting bores D D D D 7 11, L + HUB Stroke 142,5 151,5 179,5 192, L 2 32,5 38,5 50,5 57, L 3 95,5 102,5 121,5 131, L 4 87,5 94,5 109,5 117, L 5 52,5 52,5 57,5 65, L 7 2,5 2,5 2,5 2, L P

4 Typ HNZ S Ab Kolbenstangen-Ø 55, Bohrung für Hakenschlüssel From piston rod diameter 55, bore for hook wrench WAF SW I a/f L5 L3 L4 G L6 Ab Kolben-Ø 100, mit Rückschlagventil From piston dia. 100 non-return valve E D M D1 D2 D4 L1 L2 Einstellbares Drosselventil Adjustable throttle valve L + Hub I Stroke L8 D7 D6 D5 P = Anzahl der Befestigungsbohrungen P = Number of mounting bores D D D D 7 11, L + HUB Stroke L L 7 2,5 2,5 2,5 2, L P

5 Typ HNZ E Ab Kolbenstangen-Ø 55, Bohrung für Hakenschlüssel From piston rod diameter 55, bore for hook wrench WAF SW I a/f L5 L3 L4 G L6 Ab Kolben-Ø 100, mit Rückschlagventil From piston dia. 100 non-return valve E M D M1 D1 D2 L1 L2 Einstellbares Drosselventil Adjustable throttle valve L + Hub I Stroke L + HUB Stroke L M M16 x1,5 M 22 x1,5 M 28 x1,5 M 35 x1,5 M 45 x1,5 M 58 x1,5 M 65 x1,5 M 80 x 2 M 100 x 2 M 110 x 2 M 1 M 58 x1,5 M 65 x1,5 M 80 x 2 M 100 x 2 M 118 x 2 M 150 x 3 M 170 x 3 M 185 x 3 M 210 x 3 M 225 x 3

6 Typ HNZ L D L + HUB Stroke L L L 9 + HUB Stroke L L L L ) Stangen-Ø normal 1) Rod dia. normal 2) Stangen Ø-verstärkt 2) Rod dia. reinforced

7 Typ HNZ GM D D L + HUB Stroke L L 8 min L L

8 Typ HNZ GH Ab Kolbenstangen-Ø 55, Bohrung für Hakenschlüssel From piston rod diameter 55, bore for hook wrench WAF SW I a/f L5 L3 L4 G L6 D4 Ab Kolben-Ø 100, mit Rückschlagventil From piston dia. 100 non-return valve E Einstellbares Drosselventil Adjustable throttle valve a a D M D1 D2 R L1 L2 L + Hub I Stroke L9 L8 D L + HUB Stroke L L L R a

TECHNISCHE DATEN TYP HDT TECHNICAL DATA. Double-acting hydraulic telescopic cylinder,

TECHNISCHE DATEN TYP HDT TECHNICAL DATA. Double-acting hydraulic telescopic cylinder, TECHNISCHE DATEN TYP HDT Hydraulisch doppeltwirkender Teleskopzylinder TECHNICAL DATA TYP HDT Double-acting hydraulic telescopic cylinder Hydraulisch doppeltwirkender Teleskopzylinder, bis zu 4 Stufen,

More information

MOBILE LIGHT NH21 NH25. Lind Jensens Maskinfabrik A/S Kroghusvej 7, Højmark DK-6940 Lem St. Denmark Home page:

MOBILE LIGHT NH21 NH25. Lind Jensens Maskinfabrik A/S Kroghusvej 7, Højmark DK-6940 Lem St. Denmark Home page: MOBILE LIGHT NH21 NH25 Oversigtsblad Übersicht Design features for NH 21 cylinder für NH 21 Zylinder for NH 21 cylinder * Grundtyper/ Stempelstangsophæng/ Zylinderbefestigung/ Kolbenstangenbefestigung/

More information

Hydraulic cylinders. Standard & custombuilt

Hydraulic cylinders. Standard & custombuilt Hydraulic cylinders Standard & custombuilt Introduction Hydrowa specialists in standard and special hydraulics Hydrowa specializes in hydraulics. Although we offer a comprehensive standard package, our

More information

FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE

FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE 4 FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE Typ/Type CS-VE/CS-EP PN 10/10 AUS GLASFASERVERSTÄRKTEM VINYLESTERHARZ (VE) ODER

More information

Hydraulic cylinder Type LHZ

Hydraulic cylinder Type LHZ Hydraulic cylinder Type LHZ Double acting Diam. 0 mm PN [pmax.] = 2 bar Connecting dimensions Diam. to following CETOP R 8 H and ISO/DIS /I Diam. to 0 as per CETOP R 73 H and ISO/DIS 7..0.08 Symbol Description

More information

GHZ / GHZO. (two hydraulic-cylinder-series) GHZ GHZO:

GHZ / GHZO. (two hydraulic-cylinder-series) GHZ GHZO: HZ / HZO (two hydraulic-cylinder-series) HZ HZO: Piston diameter: Operating pressure: Double-acting Damping on both sides Integral limit switch Stroke monitoring Different piston seals 3-100 mm bar Piston

More information

AHP Blockzylinder mit langem Hub

AHP Blockzylinder mit langem Hub AHP Blockzylinder mit langem Hub AHP Block cylinder with long stroke AHP Vérins blocs avec course longue BRB 0 Wir bringen Qualität in Umlauf We set quality in motion ous faisons avancer la qualité Blockzylinder

More information

)D]RQVNLNRPDGL]DãWLüHQLVXVDHSRNVLERMRPLOLHSRNVLSUDãNRPSODVWLILFLUDQMH Bušenje

)D]RQVNLNRPDGL]DãWLüHQLVXVDHSRNVLERMRPLOLHSRNVLSUDãNRPSODVWLILFLUDQMH Bušenje Primjena )D]RQVNLNRPDGLXSRWUHEOMDYDMXVH]DVSDMDQMHSODVWLþQLK39&',1XFLMHYRYRGQLPVLVWHPLPD]DYRGXLQHXWUDOQH medije Radni tlak 10bara Dozvoljeni radni tlak 16 bara maks. Radna temperatrua 70ºC maks. MATERIJAL

More information

Baureihe E. Series E. Insulation and Lightweight Design Sandwich elements with a thickness of 20 mm for low heat transfer values of 1,2 W/m²K.

Baureihe E. Series E. Insulation and Lightweight Design Sandwich elements with a thickness of 20 mm for low heat transfer values of 1,2 W/m²K. Baureihe E. Series E Baukastensystem Schränke der Baureihe E bestehen aus Elementen aus glasfaserverstärktem Polyester-Sandwich verschiedener Größen. Die Elementbauweise gibt höchste Flexibilität zur Konstruktion

More information

AIR CYLINDER Series A23, A24

AIR CYLINDER Series A23, A24 A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings

More information

Index. Vorschweißflansche ab Seite 119 Welding neck flanges from Page 119. Blindflansche ab Seite 123 Blind flanges from Page 123

Index. Vorschweißflansche ab Seite 119 Welding neck flanges from Page 119. Blindflansche ab Seite 123 Blind flanges from Page 123 Flansche Flanges Index Vorschweißflansche ab Seite 119 Welding neck flanges from Page 119 Blindflansche ab Seite 123 Blind flanges from Page 123 Lose Flansche ab Seite 125 Loose flanges from Page 125 Glatte

More information

AIR CYLINDER Series A25, A26

AIR CYLINDER Series A25, A26 A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.

More information

PAV1 ISO A ACCIAIO STEEL STAHL ACIER. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques. Norme: ISO A

PAV1 ISO A ACCIAIO STEEL STAHL ACIER. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques. Norme: ISO A ISO A ACCIAIO STEEL STAHL ACIER 74 Caratteristiche tecniche I Nominal size Max working pressure Rated flow Max flow rate Min burst pressure DNP BG ISO mm Mpa l/min l/min MPa MPa MPa cc 06 1 6.3 5 35 12

More information

ISO PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125

ISO PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125 ISO 15552 PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125 PAC-Y GENERAL INFORMATION PAC-Y SERIES ISO 15552-32 - 125 CUSHIONING CYLINDER ELOXAL PLATE AND SPECIAL ROD SEAL PROVIDING HYGIENE AND LONG WORKING

More information

Let s Fall in Love. The new unilite. Advertising

Let s Fall in Love. The new unilite. Advertising Let s Fall in Love. The new unilite. Advertising Company The Lighter Specialist unilite Feuerzeuge Führend in Qualität und Sicherheit TÜV-geprüfte Sicherheit mit GS-Zeichen bei Volumenprodukten ISO 9001

More information

ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210

ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210 ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210 Description: This series represents the logical and consistent supplementation of already ISO 6022 (250 bar) and ISO 6020/1 (160 bar) standard series.

More information

AIR CYLINDER Series A12, A13

AIR CYLINDER Series A12, A13 A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long

More information

Description. Piston rod end. Technical data. Datasheet Type 47 Single rod cylinder according to DIN / ISO 6020/1

Description. Piston rod end. Technical data. Datasheet Type 47 Single rod cylinder according to DIN / ISO 6020/1 CE CV LE MM KF Datasheet Type 47 Single rod cylinder according to DIN / ISO 6020/1 Description MM Piston rod end KK - Standard cylinder to ISO 6020/1 - Strokes up to 2000 mm - Piston diameter: 25 320 mm

More information

Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump

Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Serie Series L-BV5 L_300 Flüssigkeitsringpumpen Liquid ring pumps 3 AC; 50/60 Hz 3 AC; 50/60 Hz Vakuumbetrieb Vacuum operation Typen Types 2BV5

More information

Outdoor Bushings DIN kv / A Freiluft Durchführungen DIN kv / A

Outdoor Bushings DIN kv / A Freiluft Durchführungen DIN kv / A Outdoor Bushings DIN 0 kv / 0-0 A Freiluft Durchführungen DIN 0 kv / 0-0 A Qty. 0 Top porcelain A Bottom porcelain B Brass stem Brass washer E Brass washer G Ring gasket J Plain gasket (M) Flange gasket

More information

B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections

B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components

More information

L Standard Parts for Mould Making

L Standard Parts for Mould Making A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated

More information

Screwed-head cylinders

Screwed-head cylinders Screwed-head cylinders Series HB DESCRIPTION Cylinders series HB are manufactured to be fixed on machine edges without the use of mountings. The end cap acts as a mounting device in the versions: hinge-mounted,

More information

Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm

Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets

More information

A new Dimension. Advertising

A new Dimension. Advertising A new Dimension Advertising The lighter specialist TOM Feuerzeuge Führend in Qualität und Sicherheit TÜV-geprüfte Sicherheit mit GS-Zeichen bei Volumenprodukten * ISO 9001 Zertifizierung der Produktionsstätten

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly

More information

AE Stahlblech AE Sheet steel

AE Stahlblech AE Sheet steel AE Stahlblech AE Sheet steel AE 1030.500 AE 1031.500 AE 1032.500 AE 1033.500 AE 1034.500 AE 1035.500 AE 1036.500 AE 1037.500 AE 1038.500 AE 1039.500 AE 1045.500 AE 1050.500 AE 1054.500 AE 1055.500 AE 1057.500

More information

The world s thinnest lighter. Ultra thin - Ultra light. Advertising

The world s thinnest lighter. Ultra thin - Ultra light. Advertising The world s thinnest lighter Ultra thin - Ultra light Advertising Features A2019 The Lighter Specialist unilite Feuerzeuge Führend in Qualität und Sicherheit ISO 9001 Zertifizierung der Produktionsstätten

More information

The world s thinnest lighter. Ultra thin - Ultra light. Advertising

The world s thinnest lighter. Ultra thin - Ultra light. Advertising The world s thinnest lighter Ultra thin - Ultra light Advertising Features The Lighter Specialist unilite Feuerzeuge Führend in Qualität und Sicherheit ISO 9001 Zertifizierung der Produktionsstätten Kindergesichert

More information

Provenair Series AN Cylinders Parts List / Service Instructions

Provenair Series AN Cylinders Parts List / Service Instructions Provenair Series AN Cylinders Parts List / Service Instructions 1-1/2, 2, 2-1/2, 3-1/4 and 4 BORES EXTRUDED BARREL CONSTRUCTION 5, 6, 8 and 10 BORES TIE ROD CONSTRUCTION TYPE: Aluminum, repairable, square

More information

STANDARD handles. outside. Rose. HoPPE LiVERPooL Aluminum. Aluminum. Aluminum. Aluminum. inside. HoPPE LiVERPooL. Aluminum. HoPPE LiVERPooL.

STANDARD handles. outside. Rose. HoPPE LiVERPooL Aluminum. Aluminum. Aluminum. Aluminum. inside. HoPPE LiVERPooL. Aluminum. HoPPE LiVERPooL. handle SeleCTiON STANDARD handles HoPPE ATLAnTA 1.100 PATio HoPPE 5004 Handlebar 330 mm AUBi spruce Trendline 04 spruce Classic 01 HoPPE E5011 Handlebar 400-1800 mm RAL 9010 Pure white RAL 7016 Anthracite

More information

RP SERIES 200 psi Mill-type Cylinder

RP SERIES 200 psi Mill-type Cylinder Actuation Solutions and Systems for the SERIES 200 psi Mill-type Cylinder Delivering superior long-term performance and value Designed and engineered for severe-service applications Bore Size: 2 to 20

More information

Hydraulic / 100 bar. GATEWAY to new technologies.

Hydraulic / 100 bar. GATEWAY to new technologies. Hydraulic / 100 bar GATEWAY to new technologies. 2 Advantages through innovative technology Schwenkmotor PSM highly perfected end cushioning for absorption of kinetic energy - negating the need for expensive

More information

Next Topmodel. Advertising

Next Topmodel. Advertising Next Topmodel Advertising Features The lighter specialist TOM Feuerzeuge Führend in Qualität und Sicherheit TÜV-geprüfte Sicherheit mit GS-Zeichen bei Volumenprodukten * ISO 9001 Zertifizierung der Produktionsstätten

More information

Series SIT Hydraulic Cylinders Single acting Internal Thread

Series SIT Hydraulic Cylinders Single acting Internal Thread ax: (604) 5-0070 Toll ree 1-800-98-1170 Series SIT Hydraulic Cylinders Single acting Internal Thread Pressure:,500 psi Working 3,500 psi Non-Shock Bore Sizes: 1.5 to 3.5 Rod Sizes: to 3.00 Ports: Attachments:

More information

SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250

SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2 THRU 2 BORE SIZE MAXIMUM PSI 250 SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250 ALUMINUM HEADS & CAPS LARGE PORTS PISTON PACKING PISTON WIPER BRONZE BEARING PACKING TUBE SEAL CYLINDER TUBE

More information

FALCO AF3009. en Spare parts list Tire changer Equipment. Parti di ricambio Smontagomme

FALCO AF3009. en Spare parts list Tire changer Equipment. Parti di ricambio Smontagomme FALCO AF009 it Parti di ricambio Smontagomme en Spare parts list Tire changer Equipment 9 0 870 00-07- Hinweise / Notes / Remarques / Advertencias FALCO AF009 Diese Ersatzteilliste enthält zusätzlich zu

More information

MRAD Universal Measuring Arm System For Optical/Magnetic and Fiber Optic Encoders

MRAD Universal Measuring Arm System For Optical/Magnetic and Fiber Optic Encoders Measuring Wheel Meauring Arm Encoder (Absolute or Incremetnal) Spring-loaded, adjustable measuring arm for universal applications Measuring wheels are utilized in combination with encoders to measure material

More information

ZBD 2512 Differential Cylinder Data sheet 07.16/DS13660

ZBD 2512 Differential Cylinder Data sheet 07.16/DS13660 ZBD 2512 Differential Cylinder Data sheet 07./DS Description: The STORZ hydraulic cylinder series ZBD 2512 for the nominal pressure of 250 bar is replaceable with the CDH1 series. By fixing the mounting

More information

Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16

Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16 Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16 Pneumatically operated straight bodied seat valve for the use in chemical plants, process technology and industrial automation. Unaffected by

More information

LEERSEITE / BLANK PAGE

LEERSEITE / BLANK PAGE LEERSEITE / BLANK PAGE d01330 Seite / Page 7-1 Revision 2, 03/01 05805 1 14 13 9 8 19 17 10 18 17 M 7 6 O 18 17 19 17 22 35 36 21 34 15 20 16 23 24 25 * 21 D 13 22 2 26 27 A 3 4 B 1 5 2 B 29 A 3 ** **

More information

RUwg K0 D / K0 E. Technische Daten M Technical data. Für Ringzugösen M For toroidal drawbar eyes Ø 76 VG 74059, ECE 55-01, Klasse L M Class L

RUwg K0 D / K0 E. Technische Daten M Technical data. Für Ringzugösen M For toroidal drawbar eyes Ø 76 VG 74059, ECE 55-01, Klasse L M Class L Typ / Type RUwg K0 D / K0 E Für Ringzugösen M For toroidal drawbar eyes Ø 7 VG 70, ECE -01, Klasse L M Class L 0 10 12 0 80 100 23 110± 83±0, n10, +1,00-0,30 K0 E Sicherung M K0 E Safety device ø d 2 K

More information

AIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION

AIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION compact cylinders, standardised to ISO 21287 compatibility for assembly ISO 15552 mountings double acting - Series 449 short stroke cylinders single acting / double acting Series 441 AIR CYLINDERS cylinders

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 N 8 up to N 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. ompact design Unaffected by lightly contaminated

More information

CYLINDER PARTS LIST. R/S Series Cylinders, 1978 through July AB Series Cylinders, 1988 through AF Series Cylinders, 1990 through 1993

CYLINDER PARTS LIST. R/S Series Cylinders, 1978 through July AB Series Cylinders, 1988 through AF Series Cylinders, 1990 through 1993 The purpose of this book is to provide general guidelines to cylinders and their replacement parts for machinery built between 1978 and the present. Approximate dates are intended to assist in pinpointing

More information

Air Cylinders Type : ISO-6431 & VDMA-24562

Air Cylinders Type : ISO-6431 & VDMA-24562 Air Cylinders Type : ISO-6 & VDMA-262 Conform to ISO: 6 & VDMA: 262 standards. Double acting, with adj. cushioning at both ends. sizes : Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0 & Ø0 Profiled aluminum tube with hard

More information

Series SS Solid Stainless Cylinders

Series SS Solid Stainless Cylinders Series SS Solid Stainless Cylinders Pneumatic to 200 PSI Hydraulic to 000 PSI Non shock 3/4, /8,, 2 Bore To Help Brighten Your Corner of the World. All exterior components 300 series stainless A U R O

More information

iberdur INHALTSVERZEICHNIS TABLE OF CONTENTS SOMMAIRE 2.1 EINLEITUNG INTRODUCTION INTRODUCTION 2 / 1

iberdur INHALTSVERZEICHNIS TABLE OF CONTENTS SOMMAIRE 2.1 EINLEITUNG INTRODUCTION INTRODUCTION 2 / 1 INHLTSRZEIHNIS TLE OF ONTENTS SOMMIRE 2.1 EINLEITUNG INTRODUTION INTRODUTION 2.2 MESSUNGEN DIMENSIONS DIMENSIONS OGEN ELOW OUDE T-STÜK TEE-FITTING TE REDUZIERTES-T-STÜK REDUED-TEE-FITTING TE REDUIT ROHRSTTEL

More information

The Winning Force MS SERIES MECHANICAL SHEAR. Hi-Speed Accurate Efficient Performance

The Winning Force MS SERIES MECHANICAL SHEAR. Hi-Speed Accurate Efficient Performance The Winning Force MS SERIES MECHANICAL SHEAR Hi-Speed Accurate Efficient Performance 1 The Winning Force As a total supplier for sheet metal manufacturing with almost 60 years of experience, Durma understands

More information

SMS Solid Stainless Cylinders

SMS Solid Stainless Cylinders SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function

More information

Double-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80

Double-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80 > Cylinders Series 50 CATALOGUE > Release 8.5 Rodless cylinders Series 50 Double-acting, magnetic, cushioned ø6, 25, 32, 40, 50, 63, 80»» Four ports on each chamber»» Possibility to supply both chambers

More information

86P40-2, 86P60-2 Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information

86P40-2, 86P60-2 Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information 86P40-, 86P60- Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information Application: Accurate positioning of sheet metal parts in welding equipment and handling systems. At the

More information

CAT. No. KS-570E. SCS Single Action Push Type. SCD Double Action Type. super. cylinder FUJIKURA RUBBER LTD.

CAT. No. KS-570E. SCS Single Action Push Type. SCD Double Action Type. super. cylinder FUJIKURA RUBBER LTD. CAT. No. KS-570E SC SCS Single Action Push Type SCD Double Action Type super cylinder FUJIKURA RUBBER LTD. General Description of BF Cylinders FC Series : Single/Double Action Standard Cylinders SC Series

More information

SERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)

SERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA) BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED

More information

ALLWEILER. Pressure relief valves, indirectly pilot controlled. Series DVI

ALLWEILER. Pressure relief valves, indirectly pilot controlled. Series DVI Pressure relief valves, indirectly pilot controlled Series DVI Range of application The pressure relief valves of Series DVI can be applied for maximum operating temperatures up to 150 C (higher temperatures

More information

INTEGRATED HYDRAULIC BRAKE

INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The

More information

AIR CYLINDER Series A75, A76

AIR CYLINDER Series A75, A76 A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both

More information

Double acting. Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous.

Double acting. Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous. Double acting Standard executions Version Symbol Type Parallel from bore 25 mm. S4 On request, they can be supplied according Directive 94/9/EC - ATEX II 2 GDc T5 Options Special versions on request Suffix

More information

Table of Contents. ISO/VDMA Series

Table of Contents. ISO/VDMA Series Table of Contents ISO/VDMA Series...3-22 Features and Benefits... 3 How to Order.... Technical Information... 5 Dimensions Profile Version...6-7 Tie-Rod Version...8-9 Mounting Parts...-16 Switches... 17

More information

Standard Cylinder Series SZ 100

Standard Cylinder Series SZ 100 Standard Cylinder Series SZ 100 Maximum operating pressure up to 100 bar Choice of 13 different piston sizes between 12 und 200mm and 23 different attachments Rugged yet compact design with good guiding

More information

ASP Series Steel Body NFPA Cylinder Line

ASP Series Steel Body NFPA Cylinder Line Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8

More information

FUEL PRESSURE REGULATORS. Fig. A. Fig. B. Fig. C. Fig. D MOTORSPORT COMPONENTS

FUEL PRESSURE REGULATORS. Fig. A. Fig. B. Fig. C. Fig. D MOTORSPORT COMPONENTS MOTORSPORT COMPONENTS B FUEL PRESSURE REGULATORS Purpose and Function. The fuel pressure regulator is designed to maintain the differential between fuel rail pressure and intake manifold pressure constant

More information

SLC Guard locking safety switch. The new generation of safe mechanical guard locking switches

SLC Guard locking safety switch. The new generation of safe mechanical guard locking switches SLC Guard locking safety switch The new generation of safe mechanical guard locking switches Surely. Exactly the right solution. With machines, it is imperative to ensure that there is no access or entry

More information

Twin Rod Non Rotate Cylinders RDV and AZ

Twin Rod Non Rotate Cylinders RDV and AZ Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double

More information

Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned

Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned > Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25

More information

SINGLE ACTING METRIC RANGE

SINGLE ACTING METRIC RANGE CONTENTS Page 2 General specifications Ram Style No. Female Rod Male Rod Pin Hole 3 Part Numbering System 4 Dimensions 5 Buckling Calculations 6 Buckling Force/ Graphs 7 Load Calculations 8 PBV Flow Chart

More information

ENG ECCENTRIC PRESSES C-FRAME PRESSES STRAIGHTSIDE PRESSES 1 CONNECTING ROD STRAIGHTSIDE PRESSES 2 CONNECTING ROD

ENG ECCENTRIC PRESSES C-FRAME PRESSES STRAIGHTSIDE PRESSES 1 CONNECTING ROD STRAIGHTSIDE PRESSES 2 CONNECTING ROD ENG ECCENTRIC PRESSES C-FRAME PRESSES STRAIGHTSIDE PRESSES 1 CONNECTING ROD STRAIGHTSIDE PRESSES 2 CONNECTING ROD C-FRAME PRESSES C-FRAME PRESSES C-FRAME PRESSES FRAME Project and verification of main

More information

Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm

Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,

More information

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414

More information

DOUBLE ACTING METRIC RANGE

DOUBLE ACTING METRIC RANGE CONTENTS Page 2 General specifications Ram Style No. Female Rod Male Rod 3 Part Numbering System 4 Basic Dimensions 5 Load Calculations 6 Load Calculations 7 Buckling Calculations 8 Buckling Calculations

More information

XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS

XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for

More information

acting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.

acting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available. AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity

More information

FLY BABY U.S.MAIL. Radio control model R/C Flugmodell INSTRUCTION MANUAL MONTAGEANLEITUNG U.S.MAIL VERSION SPECIFICATIONS TECHNISCHE DATEN

FLY BABY U.S.MAIL. Radio control model R/C Flugmodell INSTRUCTION MANUAL MONTAGEANLEITUNG U.S.MAIL VERSION SPECIFICATIONS TECHNISCHE DATEN Radio control model R/C Flugmodell INSTRUCTION MANUAL MONTAGEANLEITUNG FLY BABY U.S.MAIL VERSION U.S.MAIL Item No. 1600133 SPECIFITIONS Wingspan 1210mm (49in.) Length 880mm (34.6 in.) Electric Motor (See

More information

Heavy Industrial Shock Absorbers CA 2 to CA 4

Heavy Industrial Shock Absorbers CA 2 to CA 4 Heavy Industrial Shock Absorbers CA 2 to CA 4 The CA 2 to CA 4 complete the ACE product range of self-compensating shock absorbers. With these units ACE has a continuous range of selfcompensating units

More information

Subsea and industrial hydraulic manufacturers

Subsea and industrial hydraulic manufacturers Cylinders C10 & Cepac Cylinders Operating Parameters Standard cylinders Working pressure External sea pressure - Cepac subsea cylinders Temperature range Hydraulic fluid Rod speed Rec filtration 250 bar

More information

Safety Shock Absorbers SCS300 and 650

Safety Shock Absorbers SCS300 and 650 s SCS300 and 650 60 The safety shock absorber series SCS300 to 650 are based on the innovative technology of the SC² series by ACE. y combining the piston and inner tube, an energy capacity up to 525 m

More information

HYDRAULIC CYLINDER HYC

HYDRAULIC CYLINDER HYC www.hydropa.de HYDRAULIC CYLINDER HYC www.hydropa.de INTRODUCTION The hydraulic cylinder, as a link between hydraulic control and the machine, is suitable for use in many areas of industry, such as pressing

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity

More information

Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25

Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»

More information

Control Valve 8021 with integrated positioner

Control Valve 8021 with integrated positioner Control Valve 8021 GS 3 series DN 15 up to DN 200 Pneumatic control valve for the control of neutral and aggressive fluids Space saving wafer type construction Lowest possible weight Quiet operation Fast

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity

More information

DN series - Standard cylinder

DN series - Standard cylinder series - cylinder Double piston packing type series ISO-431 specification series Provide CAD external dimension. DMB DU K Rod Locking his product : E End lock Use for longer stroke request DCK2 DCQ Pin

More information

PURAKAL SERIES 100 TABLE OF CONTENTS

PURAKAL SERIES 100 TABLE OF CONTENTS TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................

More information

SMS Solid Stainless Cylinders

SMS Solid Stainless Cylinders SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function

More information

Meier'sNeuheitenAG Werbe-& Geschenkartikel. Markenfeuerzeuge

Meier'sNeuheitenAG Werbe-& Geschenkartikel. Markenfeuerzeuge Meier'sNeuheitenAG Werbe-& Geschenkartikel Markenfeuerzeuge Features The lighter specialist TOM Feuerzeuge Führend in Qualität und Sicherheit TÜV-geprüfte Sicherheit mit GS-Zeichen bei Volumenprodukten

More information

Standard strokes (for all diameters) Stroke tolerance (ISO 15552)

Standard strokes (for all diameters) Stroke tolerance (ISO 15552) Series 19-192 Cylinders according to standard ISO 12 COIHT Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C chromed steel

More information

Series MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72

Series MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72 Series MH MH MH2 MH ISO MX ISO MX ISO MX2 MH MH MH ISO M ISO M ISO M2 MH MH2 MH ISO MP ISO MP ISO MP MH MH2 MH ISO MT ISO MT2 ISO MT Double Rod nd NPA MDX Milwaukee Cylinder Series MH ISO Metric Hydraulic

More information

SERIES MH (NFPA) CYLINDER

SERIES MH (NFPA) CYLINDER MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation

More information

WIDE OPENING PARALLEL GRIPPER

WIDE OPENING PARALLEL GRIPPER News 2001 S E R I E S CGL Wide Opening Parallel Gripper Series CGL Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The wide opening parallel gripper mod. CGL is available in 5 different sizes and has

More information

TURNING AND MILLING IN ONE SET-UP

TURNING AND MILLING IN ONE SET-UP TURNING AND MILLING IN ONE SET-UP Application example - face driver CoE in combination with a revolving live centre. Turning and milling workpieces in one set-up. Video CoE 2036 CONSTANT FACE DRIVERS The

More information

Application Notes Recommended Print Modes for Roland Printers

Application Notes Recommended Print Modes for Roland Printers Application Notes Recommended Print Modes for Roland Printers Recommended Print Modes for Roland Printers ErgoSoft AG Moosgrabenstr. 13 CH-8595 Altnau, Switzerland 2011 ErgoSoft AG, All rights reserved.

More information

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE

More information

Industrial Shock Absorbers MC33 to MC64

Industrial Shock Absorbers MC33 to MC64 Industrial Shock Absorbers MC33 to MC64 Self-Compensating 36 This range of self-compensating shock absorbers is part of the innovative MAGUM series from ACE. You profit from the enhanced product life in

More information

VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring

VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides

More information

Electrically operated poppet valve. The manual override is detent and is operated by screw driver.

Electrically operated poppet valve. The manual override is detent and is operated by screw driver. Valves > electrically operated valves > Series MS- Technical details Connection Nominal size Temperature range Medium Series MS- page Materials M5 1. mm -1 C... +7 C Filtered, oil-free and dried compressed

More information

60AZinkenverstellgeräte. 60A Ajusteurs de Fourches

60AZinkenverstellgeräte. 60A Ajusteurs de Fourches Parts Manual Ersatzteilliste Manuel de pièces détachées c 60A Fork Positioners 60AZinkenverstellgeräte 60A Ajusteurs de Fourches Last revision: 24/03/2011 cascade Parts Manual - 60A82017 35D Fork Positioner

More information

Clean. Oily water separator. Water Treatment. type tested acc. to IMO-Res. MEPC 107 (49) max. 4,5 ppm under test conditions. GmbH

Clean. Oily water separator. Water Treatment. type tested acc. to IMO-Res. MEPC 107 (49) max. 4,5 ppm under test conditions. GmbH Clean Water Treatment Oily water separator type tested acc. to IMO-Res. MEPC 107 (49) max. 4,5 ppm under test conditions GmbH EC-CONFORMITY MARINE EQUIPMENT DIRECTIVE control voltage system off stage 1

More information

ISO CYLINDERS Ø ACTUATORS

ISO CYLINDERS Ø ACTUATORS ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration

More information