Alcor Petrolab Company Test List March 14, 2018 Item Description Sample Volume-ML Sample Volume-G

Size: px

Start display at page:

Download "Alcor Petrolab Company Test List March 14, 2018 Item Description Sample Volume-ML Sample Volume-G"

Grant McGee
5 years ago
Views:

1 A-A-59173A-00 A-A-59173A C / -67 F) 100 A-A-59173A-01 A-A-59173A 3.1 (Visual Inspection) 100 AAR-M AAR M (Freezing Point) 100 AAR-M AAR M (Spreadability) 100 AAR-M AAR M (Oil Separation) 50 AAR-M AAR M (Oil Swell in Grease & Reference Oil) 200 AAR-M AAR M (Water Stability) 100 AAR M942 Appendix B-1 (Seal Compatiblity - Seal Bond AAR-M Strength) AAR-M AAR-M APL APL AAR M942 Appendix B (Seal Compatibility/ Rubber Swell) AAR M942 Appendix C (Roll stability of lubricating grease C / 180 F) 100 APL 001 (Gasoline Analysis by Infrared Spectroscopy - Octane, Ethanol, Benzene, Composition) 50 APL 005 (Brake/Power Steering Fluid Cross Contamination Test) APL APL 006 (Antifreeze by Refractometer) 50 APL APL 007 (Microbial Growth - 3 Day Test - Liquicult) 10 APL APL 009 (Oil Analysis) 100 APL APL 010 (F.O.G. Analysis) 1000 APL APL 011 (GC Scan) 80 APL APL 012 (GC/MS Analysis) 80 APL APL 016 (Glycol Content in Used Oil) APL APL 017 (FTIR) 10 APL APL 019 (Trace Metals by XRF) 100 APL 020 (Evaporation Rate in Comparison With n-butyl APL Acetate) APL APL 021 (Crackle Test for Water in Oil) APL Fehling Solution Test (Sugar) 100 APL Particle size & count - nano-particles (to 6 nm) (Alcor in-house test method) 100 APL APL 024 (Estimated Lower Flammability Limit and Upper Flammability Limit, Jones Method- includes D5291) 80 APL APL-025 (Estimated Vapor Density based on Molecular Weight includes UOP 375) 300 ASA-1-4M-00 ASA 1-4 M (Volatile Solids) B ASTM B117 (Salt Spray Corrosion 100 hrs.) 100 B ASTM B117 (Salt Spray Corrosion 300 hrs.) 100 B ASTM B117 (Salt Spray Corrosion 500 hrs.) 100 B ASTM B117 (Salt Spray Corrosion 720 hrs.) 100 B ASTM B117 (Salt Spray Corrosion 1000 hrs.) 100 B ASTM B117; MIL-PRF (Salt Spray Corrosion Test - Steel 48 hrs.) 300 B ASTM B117; MIL-PRF (Salt Spray Corrosion Test - Aluminum 192 hrs.) 300 B ASTM B117 Modified (Salt Spray - Panel Coating by Spraying hrs.) 250 B ASTM B117 Modified (Salt Spray - Panel Coating by Brushing hrs.) 250 B ASTM B117 Modified (Salt Spray - Panel Coating by Immersion hrs.) 250 Page 1 of 39

2 B B ASTM B117 Modified (Salt Spray - up to 672 hrs., 24, 48, 72, 96, 336, 504, 672 hrs.) 250 ASTM B117 Modified (Salt Spray hrs. to 1440 hrs., 840, 1008, 1344, 1440 hrs.) 250 B ASTM B117 (Salt Spray Corrosion hrs.) 100 B ASTM B117; MIL-PRF-372E (Salt Spray Corrosion 1 hr.) 300 B ASTM B368 (Copper-Accelerated Acetic Acid-Salt Spray Test [CASS 96 hrs.) BMS Boeing Materials Spec (Sonic Shear Stability) 250 Boeing Materials Spec (Bulk Modulus - Including BMS Thermal Expansion) 500 BMS Boeing Materials Spec (High Temperature Ignition) 2500 BMS Boeing Materials Spec (Corrosion, Hydrolytic & Oxidation Stability - Includes Associated Tests) 250 BMS Boeing Materials Spec (Thermal Stability - Includes Associated Tests) 250 BMS Boeing Materials Spec (Wick Flammability) 100 BMS Boeing Materials Spec (Manifold Ignition) 50 Boeing Materials Spec 3-33 (Grease Consistency by Visual BMS Examination) BMS BMS-D BMS-D Boeing Materials Spec 3-33 (Grease Odor) BMS D D (Sealant Test) BMS-D F (Tedlar Surface Test) C ASTM C471 (Free and Combined Water of Gypsum) Ca3a46-00 AOCS Ca 3a-46 (Insolubles in Fats and Greases) CALC-00 Fixed Solids - Calculation CALC-01 Sodium Absorption Ratio - SAR Calculation 100 Cc9a-48 A.O.C.S Cc 9a-48 (Smoke, Flash, and Fire Points) 150 CFR CFR Part 173, Appendix H to Part 173(Method of Testing for Sustained Combustibility) 10 COM-774 Commerce Control List Supplement No. 1 to Part 774 1C006(a) (Thermal Stability /- 6 C) D ASTM D1078 (Distillation Range of Lacquer Solvents & Diluents) 100 D ASTM D1092 (Apparent viscosity) (-100 F to -20 F) 500 D ASTM D1092 (Apparent viscosity) (-20 F to 75 F) 500 D ASTM D1092 (Apparent viscosity) (75 F to 115 F) 500 D ASTM D1094 (Water Reaction Analysis) 200 D ASTM D1119 (Ash Content) 200 D ASTM D1120 (Boiling Point of Engine Coolants) 100 D ASTM D1121 (Reserve Alkalinity) 50 D ASTM D1133 (Solubility of organic solvents, KB number) 150 (50 ABS MIN) D ASTM D1159 (Bromine Number) 50 D ASTM D1160 (Distillation in Vacuum) 500 D ASTM D1177 (Freezing Point of Aqueous Engine Coolants) 100 D ASTM D1209 (Platinum-Cobalt color) 200 ASTM D1210 (Hegman Gauge - Pigment-Vehicle Dispersion D Fineness) Page 2 of 39

3 D ASTM D1218 (Refractive Index) 25 ASTM D1263 (Performance Characteristics of Automobile D Wheel Bearing Grease) 200 D ASTM D1264 (Water Resistance of 38 C / 100 F - Includes Duplicate Runs) 50 D ASTM D1264 (Water Resistance of 79 C / 175 F - Includes Duplicate Runs) 50 D ASTM D1264 (Water Resistance of 79 C / 175 F - Single run for screening) 50 D ASTM D127 (Melting Point of Grease & Petrolatum) 10 D ASTM D1275 (Copper corrosion in electrical insulating oils) 300 D ASTM D128 (Oil Content of Grease) 100 D ASTM D128 (Soap Content of Grease) 100 D ASTM D128 (Water Content of Grease) 100 D ASTM D1287 (ph of Lubricants) 50 D ASTM D129 (Total Sulfur in Volatile Liquid) D ASTM D129 (Total Sulfur) D ASTM D1293M (ph 2% Sample in 6.6 ph Water) 50 D ASTM D1296 (Odor of Volatile Solvents/Diluents) 100 D ASTM D1298 (Density (API Gravity) by Hydrometer) 1000 D ASTM D130 (Corrosion Copper Strip) 100 D ASTM D1310 (Flash Point - Tag Open Cup Tester - 60 F- 200 F) 100 D ASTM D1310 (Flash Point - Tag Open Cup Tester F- 325 F) 100 D ASTM D1310 (Flash Point - Tag Open Cup Tester - below 60 F) 100 D ASTM D1310 (Fire Point - Tag Open Cup Tester) 100 D ASTM D1319 (FIA Analysis - Aromatics, Olefins & Saturates) 5 ASTM D1319 (Hydrocarbons in Liquid Petroleum Products (FIA) D Including Depentanization) D ASTM D1321 (Wax 25 C / 77 F) 100 D ASTM D1321 (Wax 38 C / 100 F) 100 D ASTM D1321 (Wax 43 C / 110 F) 100 D ASTM D1322 (Smoke Point Analysis) 50 D ASTM D1329 (Temperature Retraction) D ASTM D1331 (Surface 25 C / 77 F) 200 D ASTM D1331 (Surface 50 C / 122 F) 200 D ASTM D1331 (Surface 100 C / 212 F) 200 D ASTM D1331 (Surface 150 C / 302 F) 200 D ASTM D1331 (Surface 200 C / 392 F) 200 D ASTM D1353 (Non-Volatile 110 C / 230 F) 200 D ASTM D1384 (Corrosion for Engine Coolants - Triplicate) 4000 D ASTM D1401 (Water 54 C / 129 F) 100 D ASTM D1401 (Water 82 C / 180 F) 100 D ASTM D1403 (Cone penetration of grease, 1/4 scale, unworked) 100 ASTM D1403 (Cone penetration of grease, 1/4 scale, worked 60 D strokes) 100 Page 3 of 39

4 D ASTM D1403 (Cone penetration of grease, 1/2 scale, worked or unworked) 100 D ASTM D1404 (Deleterious Particles in Grease) 20 D ASTM D1405 (BTU, Computed Gross Heating Value of Aviation Fuels - Calculation Only) (Requires D611, D4052, & D2622 or D7039) ASTM D1405 (BTU, Computed Gross Heating Value of Aviation Fuels) (Including Physical Tests - D611, D4052, & D2622 or D D7039) 250 D D D D D ASTM D1405 (BTU, Computed Gross Heating Value of Aviation Fuels) (Including D Requires D611 & D2622 or D7039) 50 ASTM D1405 (BTU, Computed Gross Heating Value of Aviation Fuels) (Including D2622 or D Requires D611 & D4052) 50 ASTM D1405 (BTU, Computed Gross Heating Value of Aviation Fuels) (Including D611 & D Requires D2622 or D7039) 200 ASTM D1405 (BTU, Computed Gross Heating Value of Aviation Fuels) (Including D611 & D2622 or D Requires D4052) 200 ASTM D1405 (BTU, Computed Gross Heating Value of Aviation Fuels) (Including D4052 & D2622 or D Requires D611) 50 D ASTM D1405 (BTU, Computed Gross Heating Value of Aviation Fuels) (Including D611 - Requires D4052 & D2622 or D7039) 100 D ASTM D1414 (Thickness Measurement) 500 D ASTM D1415 (O-ring Hardness Test) D ASTM D1475 (Density by 20 C / 68 F) 50 D ASTM D1475 (Density by 40 C / 104 F) 50 ASTM D1475 (Density by Other Temperatures D C / F) 50 D ASTM D1478 (Low Temperature Torque - 60 F and above) 50 D ASTM D1478 (Low Temperature Torque - 60 F to -30 F) 50 ASTM D1478 (Low Temperature Torque - Temperatures below - D F) 50 D ASTM D1478 (Low Temperature -54 C / -65 F) 50 D ASTM D1500 (Color ASTM Analysis) 100 D ASTM D1533 (Water Content in Mineral Insulating Oils) 50 D ASTM D156 (Color Saybolt Analysis) 100 D ASTM D1613 (Acidity in Volatile Solvents) 200 D ASTM D1662 (Active Sulfur) 200 D ASTM D1688M (Copper Content in Ethanol by ICP) 100 D ASTM D1688M (Metals in Ethanol by ICP: 8 or more metals) 100 D ASTM D1735 (Water Resistance of Coatings - 48 hours) D ASTM D1742 (Oil separation, grease) (at 77 F) 300 D ASTM D1742 (Oil separation, grease) (at above 77 F) 300 ASTM D1743 (Corrosion prevention properties of grease - D bearing rust test - in triplicate) 75 Page 4 of 39

5 D D ASTM D1743 Appendix X.2 (Corrosion Prevention Properties of Grease - Bearing Rust Test - Run in Triplicate - Alternate Method) 75 ASTM D1743 (Corrosion prevention properties of grease - bearing rust test) 25 D ASTM D1744 (Water Content - Karl Fischer) 5 D ASTM D1748 (Rust protection C / 120 F) 250 D ASTM D1748 (Rust protection hrs.) 250 D ASTM D1748; MIL-PRF (Rust Protection hrs., 6 Specimens Total) 500 D ASTM D1748; MIL-L-46000C (Rust Protection hrs.) 250 D ASTM D1748M; MIL-PRF-63460F (Rust Protection hrs.) 250 D ASTM D1748/MIL-PRF-6085E (Rust Protection C / 120 F) 500 D ASTM D1748 Modified (Rust Protection - Panel Coating by Spraying; 1320 hrs.) 250 D ASTM D1748 Modified (Rust Protection - Panel Coating by Brushing; 1320 hrs.) 250 D ASTM D1748 Modified (Rust Protection - Panel Coating by Immersion; 1320 hrs.) 250 D ASTM D1748/MIL-PRF (Rust Protection hrs., 6 Specimens Total) 500 D ASTM D1748 (Rust protection C / 120 F - 3 Specimens) 250 D ASTM D1748 Modified (Remove Single 100 hrs. & Photograph) 500 D ASTM D1748M; MIL-PRF-16173E (Rust Protection - 30 Days.) D ASTM D1748; MIL-PRF (Rust Protection hrs., 6 Specimens Total) 500 D ASTM D1796 (Water & Sediment in Fuel Oil) 200 D ASTM D1816 (Dielectric Strength) 2000 ASTM D1831 (Roll stability of lubricating grease - 2 hrs. at D ambient temperature) 100 D ASTM D1831 (Roll stability of lubricating grease C / 150 F) 100 D ASTM D1831 (Roll stability of lubricating grease C / 150 F) 100 D ASTM D1840 (Naphthalenes Analysis) 10 D ASTM D1840M (UV-VIS) 10 D ASTM D187 (Burn Quality of Kerosene) 2500 ASTM D1881 (Foaming Tendencies of Engine Coolants in D Glassware 250 D ASTM D189 (Conradson carbon residue) 50 D ASTM D189 (Conradson carbon residue on 10% distillation residue) D ASTM D1903 (Coefficient of Thermal Expansion by Density Measurement at Two Temperatures) 25 D ASTM D1921 (Sieve Analysis) D ASTM D2070 (Thermal Stability of Hydraulic Oils) 600 D ASTM D2074 (Amines) 25 ASTM D2112 (Oxidation Stability of Inhibited Mineral Oils by D Rotating Pressure Vessel- Includes duplicate runs) 200 Page 5 of 39

6 D ASTM D2140 (Hydrocarbon Types, VGC Method) 100 D ASTM D2155 (Autoignition temperature for fire resistant hydraulic fluids) 20 D ASTM D2161 (Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity - Calculation - Requires ASTM D445) 50 D ASTM D217 (Cone penetration of grease, unworked) 1000 D ASTM D217 (Cone penetration of grease, worked 60 strokes) ASTM D217 (Cone penetration of grease, worked 100,000 D strokes) 1000 D ASTM D217 (Cone penetration of grease, custom temperature) 1000 D ASTM D2216 (Water/Moisture Content of Soil & Rock D ASTM D2240 (Hardness Test) D ASTM D2265 (Dropping Point of Lubricating Grease) 10 D ASTM D2266 (Wear Preventive Characteristics of Lubricating Grease - Four-Ball Method) 100 ASTM D2270 (Viscosity Index - Includes ASTM 40 C & D C) 200 D ASTM D2272 (Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel - RPVOT) 200 D ASTM D2273 (Trace Sediment) 200 ASTM D2274 (Oxidation Stability of Distillate Fuel Oil D Accelerated Method) 1000 D ASTM D2276 (Particulate Matter Jet) 4000 D ASTM D (Particulate Matter Jet) 4000 D ASTM D2320 (Gravity, Specific by Pyconometer) 25 D ASTM D235 (Doctor test for solvents) 100 D ASTM D2369 (Non-Volatile Residue) 10 ASTM D2369M (Non-volatile residue per MIL-PRF-16173E D ) D ASTM D2386 (Freeze Point) 100 D ASTM D2392 (Color of Dyed Aviation Fuels) 50 ASTM D240 (BTU, Heat of Combustion - Net - Includes D Determination of Hydrogen by ASTM D5291) 10 D ASTM D240 (BTU, Heat of Combustion - Gross) 10 D D ASTM D240 (BTU, Heat of Combustion - Net - Calculation Onlyrequires D240- Gross Heat of Combustion and Hydrogen) 10 ASTM D2425 (Hydrocarbon composition; Cycloparaffins, Aromatics, Paraffins) 80 D ASTM D2440 (Oxidation Stability of Mineral Oil - 24 hrs.) 200 D ASTM D2440 (Oxidation Stability of Mineral Oil - 72 hrs.) 200 D ASTM D2440 (Oxidation Stability of Mineral Oil hrs.) 200 D ASTM D2500 (Cloud Point of Petroleum Products) 100 D ASTM D2502 (Mean Molecular Weight - Includes ASTM D445) 100 D ASTM D2509 Timken OK (Load-Carrying Capacity of Lubricating Grease -Timken Method) ASTM D2509 Single Load (Load-Carrying Capacity of D Lubricating Grease - Timken Method) ASTM D2532 (Viscosity -54 C / -65 F - 35 min/3 D hrs./72 hrs.) 100 6LBS 2 LBS Page 6 of 39

7 D ASTM D2532 (Viscosity -51 C / -60 F - 35 min) 100 D ASTM D2532 (Viscosity -51 C / -60 F - 35 min/3 hrs.) 100 D ASTM D2532 (Viscosity -51 C / -60 F - 35 min/3 hrs./72 hrs.) 100 D ASTM D2532 (Viscosity -40 C / -40 F - 35 min/3 hrs./72 hrs.) 100 D ASTM D2532 (Viscosity Stability C / -40 F) 100 D ASTM D2532 (Viscosity Stability C / -65 F) 100 D ASTM D2532 (Viscosity -40 C / -40 F - 35 min/3 hrs.) 100 D ASTM D2532 (Viscosity C / 10 F - 35 min/24 hrs.) 100 D ASTM D2532 (Viscosity -40 C / -40 F - 72 hrs.) 100 ASTM D2532 (Viscosity -54 C / -65 F - 35 min/3 D hrs.) 100 D ASTM D2532 (Viscosity Stability C / -30 F) 100 D ASTM D2532 (Viscosity Stability C / -50 F) 100 D ASTM D2532 (Viscosity Stability C / -70 F) 100 D ASTM D2595 (Evaporation Loss of Grease) 25 ASTM D2596 (Measurement of Extreme-Pressure Properties of D Lubricating Grease - Four-Ball Method) 250 D ASTM D2603 (Shear Stability, Viscosity Loss) 100 D ASTM D2619 (Hydrolytic Stability - Includes ASTM D974 & ASTM D130) 250 D ASTM D2622 (Sulfur in Fuel by Wavelength Dispersive X-Ray Florescence) 50 D ASTM D2624 (Electrical Conductivity of Petroleum 25 C / 77 F) 500 D ASTM D2624 (Electrical Conductivity of Petroleum Products - non-standard temperature) 500 ASTM D2625A (Falex Wear Life of Solid Film Lubricants by Pin D on Vee Block) (4 Runs Included) 500 D ASTM D2625B (Falex Load Carrying Capacity of Solid Film Lubricants by Pin on Vee Block) (4 Runs Included) 500 D ASTM D2625A / MIL-PRF (Falex Wear Life of Solid Film Lubricants by Pin on Vee Block) (Single Run) 200 D ASTM D2670 (Pin & Vee Block Wear Test) 200 D ASTM D2699 (Octane Number - Research) 1000 D ASTM D2699 (Octane Number - Research - Racing, 100+) 4000 D ASTM D2700 (Octane Number - Motor) 1000 D ASTM D2709 (Water & Sediment in Diesel & Biodiesel) 200 D ASTM D2710 (Bromine Index) 25 D ASTM D2711 (Demulsability) 1000 D ASTM D2714 (Falex Block-on-Ring Friction & Wear Testing) 200 ASTM D2717 (Thermal Conductivity - per temperature, 0 C to D C) 50 Page 7 of 39

8 D D D ASTM D2782 Timken OK (Extreme-Pressure Properties of Lubricating Fluids - Timken Method) ASTM D2782 Timken Single Load (Extreme-Pressure Properties of Lubricating Fluids - Timken Method) ASTM D2783 (Measurement of Extreme-Pressure Properties of Lubricating..Fluids - Four-Ball Method) 200 D ASTM D287 (Density (API Gravity) by Hydrometer) 1000 D ASTM D2878 (Estimated Molecular Weight of Lubricating Oils) 200 D ASTM D2879 (Vapor Pressure by Isoteniscope) 30 D ASTM D2879 (Vapor Pressure by Isoteniscope of heavy/dark liquids) 30 D ASTM D2879 (Vapor Pressure by Isoteniscope-with Latent Heat of Vaporization Calculation) 30 D ASTM D2879 (Vapor Pressure by Isoteniscope with Dewatering) 50 D ASTM D2879 (Vapor Pressure by Isoteniscope with Dewatering of Heavy/Dark Liquids) 100 D ASTM D2887 (Boiling Range Distribution by GC) 80 D ASTM D2892 (Standard Test Method for Distillation of Crude Petroleum) D ASTM D2893 (Oxidation Stability of Extreme Pressure Oils) including associated tests 500 D ASTM D2896 (Total base number) 50 ASTM D2983 (Viscosity, Other Temperatures C / D F) 200 D ASTM D2983 (Viscosity, -40 C / -40 F) 200 D ASTM D2983 (Viscosity, 15 C / 60 F) 200 D ASTM D2983 (Viscosity, 38 C / 100 F) 200 D ASTM D3117 (Wax Appearance Point of Distillate Fuel) 100 D ASTM D3227 (Sulfur Analysis, Mercaptan) 200 D ASTM D3228 (Nitrogen) 25 D ASTM D323 (Reid Vapor Pressure) 1000 ASTM D323A (Reid Vapor Pressure) LOOK AT D5191 D AUTOMATED 1000 D ASTM D3230 (Salt Content in Crude Oil) 200 D ASTM D3231 (Phosphorous Analysis in Gasoline) 100 D ASTM D3233 Proc A (Falex Extreme Pressure Pin & Vee Block) GALLON 0.5 GALLON D ASTM D3233 Proc B (Falex Extreme Pressure Pin & Vee Block) 300 D ASTM D3237 (Lead Content in Gasoline by AA) 50 D ASTM D3238 (Hydrocarbon Types, N-d-M Method) 200 D ASTM D3240 (Undissolved Water in Aviation Fuels - Aqua Glow Analysis) 1000 D ASTM D3241 (Jet Fuel Thermal Oxidation Test (JFTOT) Extended 5 Hour Test) 2000 D ASTM D3241 modified (JFTOT up to 5 hrs. on Middle Distillates) 2000 D ASTM D3241 (Jet Fuel Thermal Oxidation Test - JFTOT) 600 D ASTM D3241 (Jet Fuel Thermal Oxidation Test (JFTOT) Modified) 1000 D ASTM D3241 (Jet Fuel Thermal Oxidation Test - JFTOT - Breakpoint) 1000 Page 8 of 39

9 D ASTM D3242 (Acidity in Aviation Turbine Fuel) 250 D ASTM D3257 (Aromatics in Mineral Spirits by GC) 500 ASTM D3278 (Flash Point by Small Scale Closed-Cup D Apparatus) 100 D ASTM D3279 (Asphaltene content in crude oil) 2 2 D ASTM D3337 (Life and Torque of Lubricating Grease in Small Ball Bearings) D ASTM D3338 (BTU, Estimated Net Heat of Combustion in Aviation Fuels - Calculation Only) 250 D ASTM D3338 (BTU, Estimated Net Heat of Combustion in Aviation Fuels) (Including Physical Tests - D1319, D86 & D2622 or D7039) 250 D ASTM D3338 (BTU, Estimated Net Heat of Combustion in Aviation Fuels) (Including D Requires D86 & D2622 or D7039) 5 D ASTM D3338 (BTU, Estimated Net Heat of Combustion in Aviation Fuels) (Including D86 - Requires D1319 & D2622 or D7039) 200 D ASTM D3338 (BTU, Estimated Net Heat of Combustion in Aviation Fuels) (Including D2622 or D Requires D1319 & D86) 50 D ASTM D3338 (BTU, Estimated Net Heat of Combustion in Aviation Fuels) (Including D1319 & D86 - Requires D2622 or D7039) 200 D ASTM D3338 (BTU, Estimated Net Heat of Combustion in Aviation Fuels) (Including D1319 & D2622 or D Requires D86) 50 D ASTM D3338 (BTU, Estimated Net Heat of Combustion in Aviation Fuels) (Including D86 & D2622 or D Requires D1319) 250 D ASTM D3339 (Acid number, semi-micro method) D D D D D D D D ASTM D3343 (Hydrogen Content of Aviation Fuel - Calculation Only) (Requires D86, D1319 & D4052 or D1298) 250 ASTM D3343 (Hydrogen Content of Aviation Fuel - Calculated) (Including Physical Tests - D86, D1319 & D4052 or D1298) 250 ASTM D3343 (Hydrogen Content of Aviation Fuel - Calculated) (Including D86 - Requires D1319 & D4052 or D1298) 200 ASTM D3343 (Hydrogen Content of Aviation Fuel - Calculated) (Including D Requires D86 & D4052 or D1298) 5 ASTM D3343 (Hydrogen Content of Aviation Fuel - Calculated) (Including D4052 or D Requires D86 & D1319) 50 ASTM D3343 (Hydrogen Content of Aviation Fuel - Calculated) (Including D86 & D Requires D4052 or D1298) 200 ASTM D3343 (Hydrogen Content of Aviation Fuel - Calculated) (Including D86 & D4052 or D Requires D1319) 250 ASTM D3343 (Hydrogen Content of Aviation Fuel - Calculated) (Including D1319 & D4052 or D Requires D86) 50 D ASTM D341 (Calculated Viscosity - Excluding Viscosity Tests) D ASTM D3427 (Air release properties) 200 Page 9 of 39

10 D ASTM D3520 (GM Quenchometer) 500 ASTM D3527 (Life Performance of Automobile Wheel Bearing D Grease - 40 hrs.) 75 D ASTM D3527 (Life Performance of Automobile Wheel Bearing Grease - 80 hrs.) 75 D ASTM D3527 (Life Performance of Automobile Wheel Bearing Grease hrs.) 100 D ASTM D3539M (Evaporation Rate) D ASTM D3603 (Rust Prevention Characteristics of Steam Turbine Oil in the Presence of Water - Horizontal Disk Method) 600 D ASTM D3606 (Benzene Analysis by GC W/EPA Modifications) 50 D ASTM D3703 (Hydroperoxide Number of Gasoline, Jet & Diesel) 200 D ASTM D3704 (Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion) 25 D ASTM D381 (Gum Content, Existent) 100 D ASTM D381 (Gum Content, Washed) 100 D ASTM D381 (Non-volatile Gum Residue - Per MIL-DTL-27422D 4.4.1) D ASTM D381 (Existent Gum Residue - Per MIL-PRF-370J ) D ASTM D3828 (Flash Point - Seta Tester - 60 F-85 F) 100 D ASTM D3828 (Flash Point - Seta Tester - 85 F-100 F) 100 ASTM D3828 (Flash Point - Seta - above 100 F, less than D F) 100 D ASTM D3828 (Flash Point - Seta Tester - above 200 F) 100 D ASTM D3828 (Flash Point - Seta Tester - below 60 F) 100 D ASTM D3895M (Oxidation Induction Time by DSC) D ASTM D3948 (Micro Separometer Analysis - MSEP) 200 D ASTM D395B (Compression Set Deflection - O-ring Thickness) 500 D ASTM D3954 (Dropping Point of Wax) 25 D ASTM D4006 (Water by Distillation in Crude Oil) D ASTM D4007 (Water & Sediment (BS&W) in Crude Oil) 200 ASTM D4046 (Alkyl nitrate additives in diesel fuel by D spectrophotometry) D ASTM D4048 (Copper strip corrosion, grease) 50 D ASTM D4049 (Water Spray Resistance of Grease) 20 D ASTM D4052 (Density by Digital Density Meter) 100 D ASTM D4052 Modified (Quantification of Entrained/Dissolved Gas by Digital Density Measurement) 200 D ASTM D412 (Tensile Test) D ASTM D4170 (Fretting Wear Protection) 25 ASTM D4172A (Wear Preventive Characteristics of Lubricating D Fluid - Four-Ball Method) 100 D ASTM D4172B (Wear Preventive Characteristics of Lubricating Fluid - Four-Ball Method) 100 D ASTM D4172B, MIL-PRF (Wear Preventive Characteristics of Lubricating Fluid (FourBall Method) Run in Triplicate as per Method) 75 Page 10 of 39

11 D ASTM D4176 (Appearance - Free Water & Particulate Contamination) 1000 D ASTM D4176 Procedure 2 (Colonial Spec - Haze) 1000 D ASTM D4176 (Appearance - Free Water & Particulate -18 C / 0 F) 1000 D ASTM D4206 (Sustained burning using small-scale open cup apparatus) 50 D ASTM D4289 (Rubber "L" SAE AMS 3217/2C Swell and Hardness Test C / 302 F) 300 D ASTM D4289 (Rubber "CR" SAE AMS3217/3B Swell and Hardness Test C / 212 F) 300 D D D ASTM D4289 (Rubber "CR" SAE AMS3217/3B Swell and Hardness Test C and "L" SAE AMS3217/2C Swell and Hardness test C) 300 ASTM D4289 (Rubber "L" SAE AMS 3217/2C Swell and Hardness Test C / 158 F) 300 ASTM D4290 (Leakage Tendency of Automobile Wheel Bearing Grease) 200 D ASTM D4294 (Sulfur in Crude Analysis by XRF) 50 D ASTM D4310 (Sludging & Corrosion Tendency of Mineral Oils - Up to 1,000 hrs.) 1000 D ASTM D4310 (Sludging & Corrosion Tendency of Mineral Oils - 1, hrs.) 1000 D ASTM D4327 (Anions by IC) D ASTM D4377 (Water Content - Karl Fischer) 5 D ASTM D445 (Viscosity, -54 C / -65 F) 100 D ASTM D445 (Viscosity, -50 C / -58 F) 100 D ASTM D445 (Viscosity, -48 C / -54 F) 100 D ASTM D445 (Viscosity, -45 C / -49 F) 100 D ASTM D445 (Viscosity, -40 C / -40 F) 100 D ASTM D445 (Viscosity, -35 C / -31 F) 100 D ASTM D445 (Viscosity, -30 C / -22 F) 100 D ASTM D445 (Viscosity, -25 C / -13 F) 100 D ASTM D445 (Viscosity, -22 C / -7.6 F) 100 D ASTM D445 (Viscosity, -20 C / -4 F) 100 D ASTM D445 (Viscosity, -15 C / 5 F) 100 D ASTM D445 (Viscosity, -17 C / 0 F) 100 D ASTM D445 (Viscosity, -10 C / 14 F) 100 D ASTM D445 (Viscosity, -5 C / 23 F) 100 D ASTM D445 (Viscosity, -1 C / 30 F) 100 ASTM D445 (Viscosity, Other Temps Below 0 C / D F) 100 D ASTM D445 (Viscosity, 0 C / 32 F) 100 ASTM D445 (Viscosity, Other Temps Above 0 C / D F) 100 D ASTM D445 (Viscosity, 4.4 C / F) 100 D ASTM D445 (Viscosity, 5 C / 41 F) 100 D ASTM D445 (Viscosity, 10 C / 50 F) 100 D ASTM D445 (Viscosity, 15 C / 59 F) 100 D ASTM D445 (Viscosity, 20 C / 68 F) 100 Page 11 of 39

12 D ASTM D445 (Viscosity, 25 C / 77 F) 100 D ASTM D445 (Viscosity, 38 C / 100 F) 100 D ASTM D445 (Viscosity, 40 C / 104 F) 100 D ASTM D445 (Viscosity, 50 C / 122 F) 100 D ASTM D445 (Viscosity, 54 C / 129 F) 100 D ASTM D445 (Viscosity, 70 C / 158 F) 100 D ASTM D445 (Viscosity, 90 C / 194 F) 100 D ASTM D445 (Viscosity, 93 C / 200 F) 100 D ASTM D445 (Viscosity, 100 C / 212 F) 100 D ASTM D445 (Viscosity, 121 C / F) 100 D ASTM D445 (Viscosity, 122 C / F) 100 D ASTM D445 (Viscosity, 150 C / 302 F) 100 D ASTM D445 (Viscosity, 205 C / 401 F) 100 D ASTM D445 (Viscosity, 260 C / 500 F) 100 D ASTM D445 (Viscosity, 38 C / 100 F) BITUMEN 100 ASTM D445M (After Caustic, Viscosity, 40 C / D F) 100 D ASTM D445 (Viscosity, 50 C / 122 F) CRUDE 100 D D D D D D D D D ASTM D4529 (BTU, Computed Net Heat of Combustion - Calculation Only) (Requires D611, D4052, & D2622 or D7039) 250 ASTM D4529 (BTU, Computed Net Heat of Combustion of Aviation Fuels) (Including Physical Tests - D611, D4052, & D2622 or D7039) 250 ASTM D4529 (BTU, Computed Net Heat of Combustion of Aviation Fuels) (Including D611 - Requires D4052 & D2622 or D7039) 200 ASTM D4529 (BTU, Computed Net Heat of Combustion of Aviation Fuels) (Including D Requires D611, & D2622 or D7039) 50 ASTM D4529 (BTU, Computed Net Heat of Combustion of Aviation Fuels) (Including D2622 or D Requires D611 & D4052) 50 ASTM D4529 (BTU, Computed Net Heat of Combustion of Aviation Fuels) (Including D611 & D Requires D2622 or D7039) 200 ASTM D4529 (BTU, Computed Net Heat of Combustion of Aviation Fuels) (Including D611 & D2622 or D Requires D4052) 200 ASTM D4529 (BTU, Computed Net Heat of Combustion of Aviation Fuels) (Including D4052 & D2622 or D Requires D611) 50 ASTM D4530 (Micro Carbon Residue (MCRT) on 10% Distillation Residue) 200 D ASTM D4530 (Micro Carbon Residue - MCRT) 10 D ASTM D4625 (Storage Stability of Distillate Fuels - 24 weeks, Including Intermediate Measurements) ASTM D4627 (Iron Chip Corrosion for MWF - 10 D concentrations) 200 D ASTM D4629 (Total Nitrogen) 25 Page 12 of 39

13 D D D D D D D D D D D D D D D D D D D D ASTM D4636 (Corrosion & Oxidation C / 428 F - W/Intermediate Sampling - Includes Duplicate Run) 750 ASTM D4636 (Corrosion & Oxidation C / 428 F - Alternate 1 W/O Intermediate Sampling - Single Run) 400 ASTM D4636 (Corrosion & Oxidation C / 392 F - W/Intermediate Sampling - Single Run) 750 ASTM D4636 (Corrosion & Oxidation C / 392 F - Alternate 1 W/O Intermediate Sampling - Single Run) 400 ASTM D4636 (Corrosion & Oxidation C / 347 F - Alternate 2 - Single Run) 400 ASTM D4636 (Corrosion & Oxidation C / 347 F - W/Intermediate Sampling - Includes Duplicate Run) 750 ASTM D4636 (Corrosion & Oxidation C / 347 F - Alternate 1 W/O Intermediate Sampling - Single Run) 400 ASTM D4636 (Corrosion & Oxidation C / 392 F - W/Intermediate Sampling - Includes Duplicate Run) 750 ASTM D4636 (Corrosion & Oxidation C / 392 F - Alternate 1 W/O Intermediate Sampling - Single Run) 400 ASTM D4636 (Corrosion & Oxidation C / 275 F - Single Run) 750 ASTM D4636 (Corrosion & Oxidation C / 250 F - Single Run) 750 ASTM D4636 (Corrosion & Oxidation - 50 hrs.@ 200 C / 392 F - Single Run) 750 ASTM D4636 (Corrosion & Oxidation C / F - Alternate 2 - Single Run) 400 ASTM D4636 (Corrosion & Oxidation C / F - Alternate 2 - Includes Duplicate Run) 400 ASTM D4636 (Corrosion & Oxidation C / 425 F - Single Run) 400 ASTM D4636 (Corrosion & Oxidation C / 347 F - Alternate 2 - Run in Triplicate) 400 ASTM D4636 (Corrosion & Oxidation C / F - Alternate 2 - Run in Triplicate) 400 ASTM D4636 (Corrosion & Oxidation C / 347 F - Alternate 2 - Includes Duplicate Run) 400 ASTM D4636 (Corrosion & Oxidation C / 425 F - Alternate 2 - Includes Duplicate Run) 400 ASTM D4636 (Corrosion & Oxidation C / 302 F - Single Run) 400 D D ASTM D4636 (Corrosion & Oxidation C / 392 F - Alternate 1 W/O Intermediate Sampling - Single Run) 400 ASTM D4693 (Low Temperature Torque of Grease Lubricated Wheel Bearings) 25 D ASTM D471 (Swell Test) ASTM D471M; MIL-PRF-23699G (Elastomer compatibility - D AMS 3217/ C / 302 F) ASTM D471 (Elastomer compatibility - NBR D C / 212 F) ASTM D471M; MIL-PRF-23699G (Elastomer compatibility - D Silicone C) Page 13 of 39

14 D ASTM D473 (Sediment by Extraction) D ASTM D4737 (Cetane Index Analysis - Calculation Only) (Requires D86 & D4052 or D1298) 250 D ASTM D4737 (Cetane Index Analysis - Calculation) (Including Physical Tests - D86 & D4052 or D1298) 250 D ASTM D4737 (Cetane Index Analysis - Calculation) (Including D86 - Requires D4052 or D1298) 200 D ASTM D4737 (Cetane Index Analysis - Calculation) (Including D4052 or D Requires D86) 50 D ASTM D4739 (Total base number) 50 D ASTM D4807 (Particulate Contamination of Crude by Filtration) 300 D ASTM D (Drivability Index - Calculated) (Including D86 - Requires D5845 or D4815) 200 D ASTM D (Drivability Index - Calculated) (Including D Requires D86) 50 D ASTM D (Drivability Index - Calculated) (Including D Requires D86) 50 D ASTM D (Drivability Index - Calculated) (Including D86 & D5845) 250 D ASTM D (Drivability Index - Calculated) (Including D86 & D4815) 250 D ASTM D (Drivability Index - Calculation Only) (Requires D86 & D5845 or D4815) D ASTM D4814 A.1 (Corrosion Silver Strip Gasoline) 100 D ASTM D4814 X.2 (Vapor Liquid Ratio - Calculated) (Including Physical Tests - D86 & D5191) 1000 D ASTM D4814 X.2 (Vapor Liquid Ratio - Calculated) (Including D86 - Requires D5191) 200 D ASTM D4814 X.2 (Vapor Liquid Ratio - Calculated) (Including D Requires D86) 1000 D ASTM D4814 X.2 (Vapor Liquid Ratio - Calculation Only) (Requires D86 & D5191) D ASTM D4814 (Phase Separation) D ASTM D4815 (Ethanol & Oxygenates in Gasoline by GC - Includes D4052) 50 D ASTM D482 (Ash Content) 200 D ASTM D483 (Unsulfonated Residue of Petroleum Plant Spray Oils) 25 D ASTM D4868 (BTU, Computed Gross Heat of Combustion of Burner Fuels - Calculation Only) (Requires D482, D4052, D2622 & D6304) D ASTM D4868 (BTU, Computed Gross Heat of Combustion of Burner Fuels - Includes D482 & D6304) (Requires D4052 & D2622) D ASTM D4898 (Particulate Contamination by Filtration) 250 D ASTM D4928 (Water Content - Karl Fischer - Crude Oil) 5 ASTM D4929 (Chlorides Analysis in Crude Oil) (Includes D Naphtha Cut) 300 D ASTM D4951 (Metals in Lubricating Oils by ICP: First Element) 50 D ASTM D4951 (Phosphorus by ICP) 50 D ASTM D4951 (Metals in Lubricating Oils by ICP: Additional Individual Elements) 50 D ASTM D4951 (Metals in Lubricating Oils by ICP: 8 or More Metals) 50 Page 14 of 39

15 D ASTM D4951 & EN (Metals in Biodiesel by ICP: Na, K, Mg, Ca, P) 50 D ASTM D4952 (Doctor Analysis) 100 D ASTM D4982 Procedure A (Flammability Potential) D ASTM D4982 Procedure B (Flammability Potential) D5-00 ASTM D5 (Needle Penetration of Bituminous Materials) D ASTM D5001 (Lubricity test - BOCLE) 100 D ASTM D5002 (Specific Gravity) D ASTM D5006 (Measurement of Antiicing Inhibitors in Aviation Fuel - FSII) 200 D ASTM D5059 (Lead by XRF) 100 ASTM D5183 (Determination of the Coefficient of Friction of D Lubricants..Using the Four-Ball Wear Test Machine) 100 D ASTM D5185 (Metals in Fuel or Oil by ICP: First Element) 50 D ASTM D5185 (Metals in Fuel or Oil by ICP: 8 or More Metals) 50 D ASTM D5185 (Metals in Fuel or Oil by ICP: Additional Individual Elements) 50 D ASTM D5185 (Metals in Fuel or Oil by ICP: 8 or More Metals, Including Non-Standard Metals) 50 D ASTM D5186 (Aromatics & Polycyclic Aromatics by Supercritical Fluid Chromatography) D ASTM D5188 (Vapor Liquid Ratio) 1000 D ASTM D5191 (Vapor Pressure) 1000 D ASTM D5194 (Total Chlorides) 200 D ASTM D524 (Carbon Residue Ramsbottom) 50 ASTM D524 (Carbon Residue Ramsbottom on 10% Distillation D Residue) 200 D ASTM D525 (Oxidation Stability - Induction Period) 200 D ASTM D525 (Oxidation Stability - Induction Period hrs. or less) 200 D ASTM D525 (Oxidation Stability - Induction Period hrs.) 200 D ASTM D525 (Oxidation Stability - Induction Period hrs.) 200 ASTM D5291 (Carbon, Hydrogen, Nitrogen in Petroleum D Products & Lubricants) 20 D ASTM D5293 (Cold Cranking Simulator, Single Temperature 120 ASTM D5304 (Middle Distillate Fuel Storage Stability by Oxygen D Overpressure) 250 D ASTM D5306 (Flame Propagation) 100 D ASTM D5334M (Thermal Conductivity by Probe) D ASTM D5443 (PONA Analysis on light hydrocarbons by GC) 80 D ASTM D5452 (Particulate Matter - Gasoline or Jet) 4000 D ASTM D5452 (Particulate Matter - Pad Rating) 4000 D ASTM D5453 (Sulfur Content) 25 D ASTM D5501 (Ethanol, Methanol & Denaturant Content by GC) 25 D ASTM D5504 (Sulfur Speciation - Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by GC and Chemiluminescence) Page 15 of 39

16 D ASTM D5580 (Benzene,Toluene, Ethylbenzene, Xylene, C9 and heavier and Total Aromatics by Gas Chromatography) 80 D ASTM D5599 (Oxygenates in Gasoline by GC) 100 D56-00 ASTM D56 (Flash Point - Tag Closed Cup) 150 D56-01 ASTM D56 (Flash Point - Tag Closed Cup - Starting Temperature Below Ambient) 150 D ASTM D5620A (Pin & Vee Block Evaluation of Thin Film Lubricants) (4 Runs Included) 150 D ASTM D5620B (Pin & Vee Block Evaluation of Thin Film Lubricants) (4 Runs Included) 150 D ASTM D5620M, MIL-PRF (Pin & Vee Block Lubricity) (Specification Requires Three per Sample) 150 D ASTM D5621 (Shear Stability of Hydraulic Fluids) 100 ASTM D5623 (Hydrogen Sulfide & Mercaptan Sulfur Analysis in D Liquid) D ASTM D5649 (Torque Strength of Thread Fastener Adhesives) 25 D ASTM D565 (Carbonizable substances in mineral oil) D ASTM D566 (Dropping Point of Lubricating Grease & Petrolatum) 5 D ASTM D5705 (Hydrogen Sulfide H2S) D ASTM D5707 (Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine) 30 D ASTM D573 (Rubber Deterioration in Air Oven) D ASTM D5762 (Nitrogen in Petroleum by Boat-Inlet Chemiluminescence) 100 D ASTM D5763 (Oxidation and Thermal Stability Characteristcs of Gear Oil Using Universal Glassware) 400 D ASTM D5769 (Benzene, Toluene, Aromatics in Gasoline by GC/MS) 50 D ASTM D5773 (Cloud Point - Constant Cooling Rate Method) 25 D ASTM D5800 (Noack Volatility) 150 D ASTM D5845 (Ethanol & Oxygenates in Gasoline by IR Spectroscopy) 50 D ASTM D5846 (Universal Oxidation Test for Hydraulic & Turbine Oils) D ASTM D5864 (Aerobic aquatic biodegradation) D ASTM D5949 (Pour Point - Automatic Pressure Pulsing Method) 5 ASTM D5967 Annex 4 (Soot in Used Diesel Engine Lubricating D Oil) D ASTM D5969 (Corrosion Prevention with 5% Synthetic Sea Water) 400 D ASTM D5972 (Freeze Point) 10 D ASTM D6045 (Color Saybolt Analysis) 50 D ASTM D6078 (Lubricity Test - SLBOCLE) D ASTM D6079 (Lubricity HFRR) 10 ASTM D6079 (Lubricity HFRR with Coefficient of Friction D Measurement) 10 D ASTM D6082 (Foaming Sequence 150 C / 302 F) 1000 D ASTM D611 (Aniline Point) 200 D ASTM D612 (Carbonizable substances in paraffin wax) Page 16 of 39

17 D ASTM D613 (Cetane Number Using Cetane Engine) 1000 ASTM D6184 (Oil Separation from Lubricating Grease - Conical D Sieve Method) D ASTM D6184 (Oil Separation C / 212 F) 100 D ASTM D6184 modified for A-A-59173A (Oil Separation C / 302 F) 100 D ASTM D6185 (Compatibility of Binary Mixtures of Lubricating Grease) 5 lbs D ASTM D6217 (Particulate Contamination by Filtration) 1000 D ASTM D6258 (Red Dye Content in Diesel by UV-VIS) 25 D ASTM D6277 (Benzene Analysis by Mid-IR Spectroscopy) 50 ASTM D6304 (Water Content - Karl Fischer - Petroleum D products & Lube Oils) 5 D ASTM D6371 (Cold Filter Plugging Point Analysis) 100 D ASTM D6375 (Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method) 25 D ASTM D6377 (Vapor Pressure of Crude Oil - Expansion Method) 1000 D ASTM D6422 (Phase Separation in Gasoline) D ASTM D6423 (ph of Ethanol & E85) 50 D ASTM D6450 (Flash Point - Navi Flash Instrument) 50 D ASTM D6468 (Thermal Stability of Distillate Fuels) D ASTM D6470 (Salt Content in Crude Oil) ASTM D6514 (High Temperature Universal Oxidation Test for D Turbine Oils) ASTM D6546 (Elastomer Seal Compatibility - Compression Set - Includes Duplicate o-rings with single time/temperature/fluid D iteration) D ASTM D6547 (Corrosiveness, Bimetallic Couple, 10 Day) 50 D ASTM D6560 (Asphaltenes in Crude Oil) 25 D ASTM D6584 (Glycerin in Biodiesel by GC) 25 D ASTM D6595 (Trace Metals Content by RDE-AES) 100 D ASTM D664 (Acid / Neutralization Number by Potentiometric Titration) 50 D ASTM D (Acid / Neutralization Number by Potentiometric Titration - Non-Aqueous Buffer) 50 D ASTM D665A (Corrosion Protection) (1-4 hrs.) 750 D ASTM D665B (Corrosion Protection) (1-4 hrs.) 750 D ASTM D665 A/B (Corrosion Protection) (5 hrs.) 750 D ASTM D665A (Corrosion Protection) (24 hrs.) 750 D ASTM D665B (Corrosion Protection) (24 hrs.) 750 D ASTM D665B (Corrosion Protection) (48 hrs.) 750 D ASTM D6660 (Freeze Point) 100 D ASTM D6668 (Hot Surface Ignition) ASTM D6730 (PIANO Analysis with Detailed Hydrocarbon D Analysis by GC) D ASTM D6743 (Thermal Stability of Organic Heat Transfer Fluids - Performed In Triplicate per Method) 300 D ASTM D6743 (Thermal Stability of Organic Heat Transfer Fluids) - First Replicate 100 Page 17 of 39

18 D D ASTM D6743 (Thermal Stability of Organic Heat Transfer Fluids) - Each Additional Replicate 100 ASTM D6743 (Thermal Stability of Organic Heat Transfer Fluids - Additional Sample Cell, No testing) 300 D ASTM D6756 (Red Dye Content of Diesel Fuel) 25 D ASTM D6793 (Bulk Modulus) 750 D ASTM D6839 (Hydrocarbon Types, Oxygenate Compounds and Benzene in Spark Ignition Engine Fuels by Gas Chromatography) 80 D ASTM D6866 (Biobased Content Using Radiation) 25 D ASTM D6922 (Homogeneity & Miscibility( 300 D ASTM D6971 (Ruler Test) D70-00 ASTM D70 (Density of Semi-Solids by Pycnometer) 50 D ASTM D7039 (Sulfur in Fuel by Wavelength Dispersive X-Ray Florescence) 50 D ASTM D7111 (Trace Metals in Middle Distillates by ICP: First Element) 50 D ASTM D7111 (Trace Metals in Middle Distillates by ICP: Additional Individual Elements) 50 D ASTM D7111 (Trace Metals in Middle Distillates by ICP: 8 or more metals) 50 D ASTM D7111 (Trace Metals in Middle Distillates by ICP: nonroutine element) 50 D ASTM D7111 (Trace Metals in Middle Distillates by ICP: First Non-Routine Element) 50 D ASTM D7169 (Light ends by GC Distillation, Simulated or High Temp-GC) 80 D ASTM D7171 (Hydrogen Content by NMR) D ASTM D7303 (Metals in Grease by ICP: First Element) 10 D ASTM D7303 (Metals in Grease by ICP: 8 or More Metals) 10 ASTM D7303 (Metals in Grease by ICP: Additional Individual D Elements) 10 D ASTM D7317 (Pentane Insolubles in Used Lubricating Oils) D ASTM D7321 (Particulate Contamination of Biodiesel) 1000 ASTM D7328 (Sulfate & Chlorides in Ethanol by Ion D Chromatography) 50 D ASTM D7371 (FTIR Scan) 10 D ASTM D7371 (Biodiesel Content in Diesel Fuel by FTIR) 25 D ASTM D7462 (Oxidation Stability of Biodiesel Blends) 1000 D ASTM D7501 (Cold Soak Filtration for Biodiesel) 600 D ASTM D7536 (Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry) D ASTM D7637 Glycerin Content 5 D ASTM D7667 (Corrosion Silver Strip) 100 D ASTM D7687 (Microbial Growth - 1 Day Test) LuminUltra 50 D ASTM D7691 (Trace Metals in Crude Oil by ICP: First Element) 50 D ASTM D7691 (Trace Metals in Crude Oil by ICP: Additional Individual Elements) 50 D ASTM D7691 (Trace Metals in Crude Oil by ICP: 8 or more metals) 50 Page 18 of 39

19 D ASTM D7752 (Compatibility of Hydraulic Fluids IAW ISO ) D ASTM D7795 (Acidity in Ethanol by Titration) 250 D ASTM D7797 (Trace FAME in Jet Fuel by FTIR) 100 D ASTM D7872 (Pipeline Drag Reducing Additive - DRA) 1000 D ASTM D7946 (Initial ph of Petroleum Products) 250 ASTM D7959 (Chloride Content of Aviation Turbine Fuels by D Chloride Strip) 3500 D ASTM D7963 (FAME Content in Diesel Fuel by FIJI) D ASTM D808 (Total Halogens) 2 ASTM D847 (Acidity of Benzene, Toluene, Xylenes, Naphthas, D Hydrocarbons) 500 D ASTM D848 (Acid wash color) D ASTM D849 (Corrosion Copper Strip) D ASTM D850 (Distillation of Aromatic Hydrocarbons) D86-00 ASTM D86 (Distillation Analysis) 200 D86-01 ASTM D86 (Distillation Analysis, Crude Cuts) 200 D87-00 ASTM D87 (Melting Point of Paraffin Wax) 10 D ASTM D873 (Oxidation Stability of Aviation Fuels) 200 D ASTM D874 (Ash Content Sulfated) 200 D ASTM D877 (Dielectric Breakdown Voltage of Insulating Liquids Using..Disk Electrodes) 500 D ASTM D891 (Specific Gravity of Industrial Aromatic Hydrocarbons) 500 D ASTM D892 (Foam Sequence I) 1000 D ASTM D892 (Foam Sequence I, II, III) 1000 D ASTM D892 Option A (Foaming Sequence I, II, III) 1000 D ASTM D892 (Foam Sequence I, II) 1000 D ASTM D893 (Insoluble content in used lubricating oils; Toluene & Pentane insolubles) 50 D ASTM D893 (Normal Pentane & Toluene Insolubles in Used Lubricating Oils - With Coagulant) 50 D ASTM D893 (Normal Pentane & Toluene Insolubles in Used Lubricating Oils - Without Coagulant) 50 D91-00 ASTM D91 (Precipitation Point) 200 D Specification ASTM D910 (Solids Test) D92-00 ASTM D92 (Flash Point - Cleveland Open Cup) 150 D92-01 ASTM D92 (Fire Point - Cleveland Open Cup - Includes Flash Point) 150 D92-02 ASTM D92 (Fire Point - Cleveland Open Cup - Includes Pre- Test Oil Separation) 150 D ASTM D924 (Dielectric 25 C & 100 C) 100 D93-00 ASTM D93 (Flash Point - Pensky-Martens) 150 D ASTM D937 (Cone penetration of petrolatum) 1000 D ASTM D938 (Congealing point of pharmaceutical petrolatum) 10 D94-00 ASTM D94B (Saponification Number of Petroleum Products) 50 ASTM D942 (Oxidation stability of grease hrs. w/catalyst - D single run) 100 D ASTM D942 (Oxidation stability of grease hrs - single run) 100 Page 19 of 39

20 D ASTM D942 (Oxidation stability of grease hrs - single run) 100 ASTM D942 (Oxidation Stability of Grease C / D F - Includes Duplicate Run) 100 D ASTM D942 (Oxidation stability of grease hrs - single run) 100 D ASTM D942 (Oxidation stability of grease hrs - duplicate run per method) 100 D ASTM D942 (Oxidation stability of grease hrs - duplicate run per method) 100 D ASTM D942 (Oxidation stability of grease hrs - duplicate run per method) 100 ASTM D943 (Oxidation Characteristics of Inhibited Mineral Oils - D ,000 hrs., Including All Associated Tests) 1000 D95-00 ASTM D95 (Water by Distillation in Petroleum Products & Bituminous Materials) 500 D97-00 ASTM D97 (Pour Point) 100 D ASTM D971 (Interfacial Tension - Oil Against Water by DuNuoy 25 C / 77 F) 100 D ASTM D971 (Interfacial Tension - Oil Against Water by DuNuoy Other Temeratures C / F) 100 D ASTM D972 (Evaporative 66 C / 151 F) 50 D ASTM D972 (Evaporative 100 C / 212 F) 50 D ASTM D972 (Evaporative 135 C / 275 F) 50 D ASTM D972 (Evaporative 175 C / 347 F) 50 D ASTM D972 (Evaporative 205 C / 401 F) 50 D ASTM D972 (Evaporative 149 C / 300 F) 50 D ASTM D972 (Evaporative 204 C / F - 22 hrs.) 50 D ASTM D972 (Evaporative 204 C / F - 72 hrs.) 50 D ASTM D972 (Evaporative 100 C / 212 F - 22 hrs.) 50 D ASTM D972 (Evaporative 121 C / 250 F - 22 hrs.) 50 D ASTM D972 (Evaporative 99 C - 22 hrs.) 50 D ASTM D972 (Evaporative 204 C / F hours) 50 D ASTM D974 (Acid / Base Number by Color Indicator Titration) 100 D ASTM D976 (Cetane Index Analysis - Calculation Only) (Requires D86 & D4052 or D1298) 250 D ASTM D976 (Cetane Index Analysis - Calculation) (Including Physical Tests - D86 & D4052 or D1298) 250 D ASTM D976 (Cetane Index Analysis - Calculation) (Including D86 - Requires D4052 or D1298) 200 D ASTM D976 (Cetane Index Analysis - Calculation) (Including D4052 or D Requires D86) 50 DEF Def Stan (Part 61) Method 6 (Hydrolytic Stability) 500 Def Stan (Part 61) Method 22 (Elastomer Compatibility - DEF Silicone - 24/ C / 347 F) 500 DEF Def Stan (Part 61) Method 22 (Elastomer Compatibility - LCS Fluorocarbon - 24/ C / 392 F) 500 Page 20 of 39

SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock

SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate