Male and Female Threads Inch and Metric Steel and Stainless Steel
|
|
- Frederick Carter
- 5 years ago
- Views:
Transcription
1 362 TANAR CAM EVER Male and Female Threads Inch and Metric teel and tainless teel A±1 A±1 These cam action lever fasteners allow for quick fastening and unfastening without the use of tools. They allow the user to tighten by threading like a traditional fastener however, for final tightening the cam lever is pushed downward. To unfasten, the cam lever is pulled up releasing and allowing the fastener to be unthreaded. They are ideal for quick change operations where parts only have to be loosened and not completely unassembled. The aluminum handles have a black powder coat finish. The steel studs have a blue chromate finish. The stainless handles have an electrolytic polish finish. The thrust washers are made from fiberglass reinforced plastic. INC - AUMINUM ANE - TEE COMPONENT - FEMAE TREA Clamping and Force Force Throw Part # Thread A bs. bs A2 1/ A3 5/ , INC - AUMINUM ANE - TAINE COMPONENT - FEMAE TREA Clamping and Force Force Throw Part # Thread A bs. bs A2 1/ A3 5/ , INC - TAINE ANE - TAINE COMPONENT - FEMAE TREA Clamping and Force Force Throw Part # Thread A bs. bs A2 1/ A3 5/ , INC - AUMINUM ANE - TEE COMPONENT - MAE TREA Clamping and Force Force Throw Part # Thread A bs. bs X X X X A2X20 1/ A2X30 1/ A2X40 1/ A2X50 1/ A3X25 5/ , A3X30 5/ , A3X40 5/ , A3X50 5/ , A4X25 3/ , A4X30 3/ , A4X40 3/ , A4X50 3/ , oreka r., Fraser MI Phone: Fax:
2 363 TANAR CAM EVER Male and Female Threads Inch and Metric teel and tainless teel (continued) A±1 A±1 INC - AUMINUM ANE - TAINE COMPONENT - MAE TREA Clamping and Force Force Throw Part # Thread A bs. bs X X X X A2X20 1/ A2X30 1/ A2X40 1/ A2X50 1/ A3X25 5/ , A3X30 5/ , A3X40 5/ , A3X50 5/ , A4X25 3/ , A4X30 3/ , A4X40 3/ , A4X50 3/ , METRIC - AUMINUM ANE - TEE COMPONENT - FEMAE TREA Clamping and Throw A Force Force Part # Thread mm mm mm mm mm mm mm mm bs. bs. mm M M M , METRIC - AUMINUM ANE - TAINE COMPONENT - FEMAE TREA Clamping and Throw A Force Force Part # Thread mm mm mm mm mm mm mm mm bs bs. mm M M M , METRIC - TAINE ANE - TAINE COMPONENT - FEMAE TREA Clamping and Throw A Force Force Part # Thread mm mm mm mm mm mm mm mm bs bs mm M M M , oreka r., Fraser MI Phone: Fax:
3 364 TANAR CAM EVER Male and Female Threads Inch and Metric teel and tainless teel (continued) A±1 A±1 METRIC - AUMINUM ANE - TEE COMPONENT - MAE TREA Clamping and Throw A Force Force Part # Thread mm mm mm mm mm mm mm mm mm bs. bs. mm X20 M X30 M X40 M X50 M X20 M X30 M X40 M X50 M X25 M , X30 M , X40 M , X50 M , X25 M , X30 M , X40 M , X50 M , METRIC - AUMINUM ANE - TAINE COMPONENT - MAE TREA Clamping and Throw A Force Force Part # Thread mm mm mm mm mm mm mm mm mm bs. bs. mm X20 M X30 M X40 M X50 M X20 M X30 M X40 M X50 M X25 M , X30 M , X40 M , X50 M , X25 M , X30 M , X40 M , X50 M , oreka r., Fraser MI Phone: Fax:
4 365 AJUTAE CAM EVER Male Threads Inch and Metric teel and tainless teel A ±1 pin for the fine adjustment of the tensioning lever These cam action lever fasteners allow for quick fastening and unfastening without the use of tools. They allow the user to tighten by threading like a traditional fastener however, for final tightening the cam lever is pushed downward. To unfasten, the cam lever is pulled up releasing and allowing the fastener to be unthreaded. These adjustable cam levers feature a slot on the top of the stud to allow for fine adjustments of the tensioning lever, without having to rotate the handle. They are ideal for quick change operations where space may be limited or precise tension has to be applied. The aluminum handles have a black powder coat finish. The steel studs have a blue chromate finish. The stainless handles have an electrolytic polish finish. The thrust washers are made from fiberglass reinforced plastic. INC - AUMINUM ANE - TEE COMPONENT - MAE TREA Clamping and Force Force Throw Part # Thread A bs. bs X X X X A2X20 1/ A2X30 1/ A2X40 1/ A2X50 1/ A3X25 5/ , A3X30 5/ , A3X40 5/ , A3X50 5/ , A4X25 3/ , A4X30 3/ , A4X40 3/ , A4X50 3/ , INC - AUMINUM ANE - TAINE COMPONENT - MAE TREA Clamping and Force Force Throw Part # Thread A bs. bs X X X X A2X20 1/ A2X30 1/ A2X40 1/ A2X50 1/ A3X25 5/ , A3X30 5/ , A3X40 5/ , A3X50 5/ , A4X25 3/ , A4X30 3/ , A4X40 3/ , A4X50 3/ , oreka r., Fraser MI Phone: Fax:
5 366 AJUTAE CAM EVER Male Threads Inch and Metric teel and tainless teel (continued) A ±1 pin for the fine adjustment of the tensioning lever INC - TAINE ANE - TAINE COMPONENT - MAE TREA Clamping and Force Force Throw Part # Thread A bs. bs X X X X A2X20 1/ A2X30 1/ A2X40 1/ A2X50 1/ A3X25 5/ , A3X30 5/ , A3X40 5/ , A3X50 5/ , A4X25 3/ , A4X30 3/ , A4X40 3/ , A4X50 3/ , METRIC - AUMINUM ANE - TEE COMPONENT - MAE TREA Clamping and Throw A Force Force Part # Thread mm mm mm mm mm mm mm mm mm bs. bs. mm X20 M X30 M X40 M X50 M X20 M X30 M X40 M X50 M X25 M , X30 M , X40 M , X50 M , X25 M , X30 M , X40 M , X50 M , oreka r., Fraser MI Phone: Fax:
6 367 AJUTAE CAM EVER Male Threads Inch and Metric teel and tainless teel (continued) A ±1 pin for the fine adjustment of the tensioning lever METRIC - AUMINUM ANE - TAINE COMPONENT - MAE TREA Clamping and Throw A Force Force Part # Thread mm mm mm mm mm mm mm mm mm bs. bs. mm X20 M X30 M X40 M X50 M X20 M X30 M X40 M X50 M X25 M , X30 M , X40 M , X50 M , X25 M , X30 M , X40 M , X50 M , METRIC - TAINE ANE - TAINE COMPONENT - MAE TREA Clamping and Throw A Force Force Part # Thread mm mm mm mm mm mm mm mm mm bs. bs. mm X20 M X30 M X40 M X50 M X20 M X30 M X40 M X50 M X25 M , X30 M , X40 M , X50 M , X25 M , X30 M , X40 M , X50 M , oreka r., Fraser MI Phone: Fax:
PULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
More information19 Swell Action Latch
150 19 Swell Action Latch Plastic ylon and glass-filled nylon black with rubber bushing Ø 2.4 (.09) Acorn nut M6 Thread 39 (1.53) Handle / tee shaft sub-assembly 1.5 (.059) 400 (90lbf) 2.5 (.098) 690 (155lbf)
More informationSGM Series. Size 22 Contacts. Qualified to MIL-DTL IEC Publication HIGH DENSITY RECTANGULAR CONNECTORS with FIXED CONTACTS
Size 22 Contacts Qualified to MI-DT-28748 IEC Publication 807-1 Telecommunication U.. File #E140980 MIITARY SPECIFICATIONS: Qualified to MI-DT-28748/7 and MI- DT-28748/8. INTERNATIONA STANDARDS: IEC 807-1
More informationHow to select your fastening screwdrivers?
Fastening Pistol shape for horizontal applications or for better controllability Straight shape for vertical applications How to select your fastening screwdrivers? Clutch Type IMPACT (rocking dog) Good
More informationApplication Coding Cable diameter Color Part No. Std. Pack Part No. Std. Pack. Female connector. gray black gray black gray black green
Connectors Connector for cables of Ø 6 10 and 10 14 mm With spring clamp connections for rigid cables of 0.5 2.5 mm 2, f fine-stranded cables of 0.5 1.5 mm 2 with ferrules, stranded cables of 0.75 1.5
More informationFour Wheel Drive Kit Groundsmaster 580D
Four Wheel Drive Kit Groundsmaster 580D FORM NO. 957 Rev B Model No. 0599 00 thru 99999 INSTALLATION INSTRUCTIONS POTENTIAL HAZARD Traction Unit rolls over. WHAT CAN HAPPEN Bodily injury could occur. 4
More informationINSTALLATION MANUAL. Level of Difficulty. Parts List. Product Image. Tools Required. Notes and Maintenance. Torque Specifications.
INSTALLATION MANUAL Parts List 1 Bull bar 2 Upper frame mounting bracket 1 Driver / left lower frame mounting bracket 1 Passenger / right lower frame mounting bracket 2 Button head bolt, 6mm 4 Flat washer,
More informationINSTALLATION INSTRUCTIONS FOR MODEL H00984
INSTALLATION INSTRUCTIONS FOR MODEL H00984 IMPORTANT: REVIEW ALL INSTRUCTIONS, PARTS LISTS, & INSTALLATION DIAGRAMS BEFORE STARTING INSTALLATION HORN ASSEMBLY 1. Follow steps 1-5 for both horns. For best
More informationBall & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
More informationRetrofit Steering Column
Retrofit Steering Column INSTALLATION INSTRUCTIONS for 1974-77 Bronco FOR PART NUMBER S: 1130845010, 1130845020, 1130845051, 1130855010, 1130855020, 1130855051, 1170845010, 1170845020, 1170845051, 1170855010,
More informationSpecifications D3C, D4C AND D5C SERIES III TRACTORS POWER TRAIN. Steering Brake Group Pedal Steer (Standard)
Page 1 of 9 Specifications D3C, D4C AND D5C SERIES III TRACTORS POWER TRAIN Steering Brake Group Pedal Steer (Standard) Page 2 of 9 Torque for all 1/2 in. locknuts that hold rod ends in place on the rods...
More informationInstallation and Maintenance Instructions for Morin MRP Pneumatic Rack and Pinion Actuators
for Morin MRP Pneumatic Rack and Pinion Actuators Introduction The Morin MRP Pneumatic Actuator is a compact, rack & pinion design, conforming to Keystone standard or direct mount standards or EN ISO 5211
More informationINSTALLATION INSTRUCTIONS BULL BAR DODGE RAM 1500 PART # B-D1091;B-D2091
INSTALLATION INSTRUCTIONS PART # B-D1091;B-D2091 PARTS LIST: Qty Description Qty Description 1 Bull Bar 10 12mm Lock Washers 2 Upper Frame Brackets (for trucks without tow hooks only) 8 12-1.75mm Hex Nuts
More informationGeneral Installation Instructions for Pipe-Style Snow Guard Accessories
General Installation Instructions for Pipe-Style Snow Guard Accessories All of our pipe-style snow guard accessories fit all of our pipe snow guards for through fastened or clamp to seam applications.
More informationINSTALLATION INSTRUCTION BULL BAR DODGE RAM 1500 PART NUMBER
INSTALLATION INSTRUCTION 09-12 DODGE RAM 1500 PART NUMBER - 200691 PARTS LIST: Qty Description Qty Description 1 Bull Bar 10 12mm Lock Washers 2 Upper Frame Mounting Brackets (for trucks without tow hooks
More informationCAM Lock Panels. Overview and Features. Features and Benefits. CAM Type. Clear Snap Back Cov- Cap & Lanyard. Double Set Screw.
CAM Lock Panels Overview and Features CAM Type Termination Type NEMA 3R 45 90 Threaded Post Double Set Screw Clear Snap Back Cov- Cap & Lanyard Blank Features and Benefits CAM Panels are shipped pre-assembled
More informationV05 General Purpose Bench Fume Hood
V05 General Purpose Bench Fume Hood with Vertical Rising ash Accessories Included: 4 120 VAC 20 amp GFCI protected duplex receptacles 1 LED light fixture with illumination and color controller 1 Electronic
More informationINSTALLATION INSTRUCTIONS RATTLER STEEL RUNNING BOARDS DODGE RAM 1500 REGULAR CAB REGULAR CAB
INSTALLATION INSTRUCTIONS PARTS LIST: 2 Steel Running Boards 3 12mm Hex Nuts 1 Driver/Left Mounting Bracket 4 10-1.5mm x 35mm Hex Bolts 1 Driver/Left Support Bracket 4 10mm x 27mm OD x 3mm Flat Washers
More informationHAND THROTTLE KIT For Workman 3000 Series
FORM NO. 7 6 MODEL NO. 0746 INSTALLATION INSTRUCTIONS HAND THROTTLE KIT For Workman 000 Series. Position vehicle on a clean, level surface, stop engine, engage parking brake and remove key from ignition
More informationInstallation and Maintenance Instructions for Grinnell GRP Pneumatic Rack and Pinion Actuators
FLOW CONTROL for Introduction The Grinnell GRP Pneumatic Actuator is a compact, rack & pinion design, conforming to Grinnell standard or direct mount standards or EN ISO 5211 mounting configuration, depending
More informationI-Sheet Number Rev.B 3-1/2 OVAL BULL BAR DODGE RAM 1500
PARTS LIST: 1 Bull Bar 2 10-1.5mm x 35mm Hex Bolts 2 Tube Brackets (Bull Bar) passenger or driver side 2 10mm Lock Washers 2 Upper Frame Brackets (models w/o tow hooks only) 4 10mm x 27mm OD x 3mm Flat
More informationASSEMBLY INSTRUCTIONS GT MIXED 150/280 SEALED CONNECTION SYSTEM
ASSEMBLY INSTRUCTIONS GT MIXED 150/280 SEALED CONNECTION SYSTEM NOTE: PLEASE CONTACT YOUR DELPHI SALES REPRESENTATIVE WITH ANY QUESTIONS OR COMMENTS CONCERNING THESE ASSEMBLY INSTRUCTIONS. COMPONENT P/N
More informationK K
K0186 cast iron 2 R Gray cast iron, GJS 400 umbled, black powder-coated, support faces machined K0186.12510 1 ±0,5 KIPP, metric 202 Item o. Item o. 1 2 R Load tumbled tumbled capacity powder-coated, black
More informationDue to changed market conditions and cost changes on a range of products we have to adjust gross prices for the parts affected.
Price changes valid as of April 1 st 2012 Due to changed market conditions and cost changes on a range of products we have to adjust gross prices for the parts affected. Products listed in table Range
More informationEquipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER C (GUN METAL GRAY FINISH) NISSAN SENTRA 1.
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER 21-799C (GUN METAL GRAY FINISH) 2014-16 NISSAN SENTRA 1.8L 1 ITEM NO. PART NUMBER DESCRIPTION QTY. 1 21-2157D AIR
More informationCONSTANT TENSION KIT UNINSTALLING
CONSTANT TENSION KIT UNINSTALLING Restoration of the Capstan Servo PWA Remove the piggyback board, and de-solder the six wires which connect it to the Capstan Servo PWA. Restoration of the Transport Control
More informationHARDWARE SET SCREWS M8 X 6 (USED COMMONLY IN SCORES) SET SCREWS M6 X 5 (USED COMMONLY IN SCORES) OTC #OTC M8 OTC #OTC M6
HARDWARE SET SCREWS M8 X 6 (USED COMMONLY IN SCORES) SET SCREWS M6 X 5 (USED COMMONLY IN SCORES) Brass tip alloyed steel black finish. 6000 BEARING 10MM SHIELD OTC #OTC-9001-0-M8 OTC #OTC-9002-0-M6 OTC
More informationYour Steering Column Specialist
Cable Shift Installation Instructions for: Ford Column to C-4 Transmission www.ididitinc.com ididit is... Your Steering Column Specialist For # s 2802350010 ididit inc. 610 S. Maumee St. Tecumseh, MI 49286
More informationDriver Side Support Bracket pictured in "no-tow hook" direction. Reverse direction for tow hook equipped vehicles
PARTS LIST: 1 Bull Bar 2 10-1.5mm x 35mm Hex Bolts 2 Tube Brackets (Bull Bar) passenger or driver side 2 10mm Lock Washers 2 Upper Frame Brackets (models w/o tow hooks only) 4 10mm x 27mm OD x 3mm Flat
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationSteering Pump. NOTE: Always use these tags when requesting service assemblies as there may be slight differences in internal components.
file://c:\tso\tsocache\vdtom_5368\svk~us~en~file=svkb2a01.htm~gen~ref.htm Page 1 of 3 Section 11-02A: Steering Pump, Power, C-II DESCRIPTION AND OPERATION 1997 Aerostar, Ranger Workshop Manual Steering
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA TOYOTA SEQUOIA PART # 2067/2067-2
INSTALLATION INSTRUCTIONS 07-15 TOYOTA TUNDRA 08-15 TOYOTA SEQUOIA PART # 2067/2067-2 PARTS LIST: 1 Grille Guard 2 10mm Cam Lever Quick Release Bolts with Special Pivot Washer 1 Driver/left Frame Mounting
More informationImpact Sockets & Accessories
HEAVY BOLTING APPLICATIONS Impact Sockets & Accessories A complete solution for every tool application Ph: 1300 WALTAN (1300 925 826) 6 POINT SOCKETS 12 POINT SOCKETS IN-HEX DRIVERS ADAPTORS UNIVERSAL
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationINSTALLATION INSTRUCTIONS RATTLER STEEL RUNNING BOARDS DODGE RAM 1500 QUAD CAB
INSTALLATION INSTRUCTIONS PARTS LIST: 2 Steel Running Boards 5 12mm Lock Washers 1 Driver/Left Mounting Bracket 5 12mm Hex Nuts 1 Driver/Left Center Mounting Bracket 6 10-1.5mm x 35mm Hex Bolts 2 Driver/Left
More informationSIZE TABLES In-Swing Doors and Sidelights
In-Swing Doors and Sidelights (311) (292) (362) (343) (413) (394) (851) (953) (1 124) (1 105) (1 718) (1 699) (1 924) (1 902) (2 226) (2 207) 1' 0 11 2 1' 2 1' 1 1 / 1' 4 1' 3 2' 10 2' 9 3' 1 3' 8 3' 7
More informationFire Fighting Equipment Hydrants, Nozzles and Hoses Page 9-1
Fire Fighting Equipment Hydrants, Nozzles and Hoses Page 9-1 FIRE FIGHTING EQUIPMENT Lloyds approved, equipment standard on Feadships and other top European Yacht builders. Used also by commercial vessels
More information#92 DISC BRAKE ADJUSTMENTS # BRAKE MONITOR
#92 DISC BRAKE ADJUSTMENTS #102-091 BRAKE MONITOR Page 1 of 11 HOLLISTER-WHITNEY DISC BRAKE WITH BRAKE MONITOR ADJUSTMENT PROCEDURE Page 2 of 11 HOLLISTER-WHITNEY DISC BRAKE WITH MONITOR SWITCH ADJUSTMENTS
More informationPneumatic Rotary Actuator Type 3278
Pneumatic Rotary Actuator Type 3278 Fig. 1 Type 3278 Pneumatic Rotary Actuator 1. Design and principle of operation The single-acting rotary actuator incorporating spring return mechanism can be attached
More informationBIN ASSORTMENTS GRADE 5 USS ZINC PLATED-#LA100 GRADE 8 USS ZINC PLATED-#LA102 5/8 USS NUTS 9/16 USS NUTS 9/16 FLAT WASHER 5/8 FLAT WASHER
BIN ASSORTMENTS GRADE 5 ZINC PLATED-#LA100 GRADE 8 ZINC PLATED-#LA102 1/4 5/16 3/8 7/16 1/2 9/16 5/8 1/4 thru 5/8 Hex Nuts, Flat Washers, Lock Washers, & Cap Screw Assortment 1/4 FLAT 5/16 FLAT 3/8 FLAT
More information2006 Series Geared Rotary Limit Switches
SUPERIOR DESIGN AND OPERATING FEATURES Quality parts make each Geared Rotary Limit Switch highly dependable. The limit switch s ½" input shaft is connected to a worm gear. Adjustable self-lubricating nylon
More informationDIGIFLO ELECTRONIC FLOWMETER
DIGIFLO ELECTRONIC FLOWMETER PIPE FITTING INSTALLATION MANUAL SADDLE MACHINED IN-LINE BODY MOLDED IN-LINE BODY MOLDED TEE Blue-White R Industries, Ltd. F-2000 Page 2 1.0 Temperature vs. Pressure Temperature
More informationInstallation Instructions
TROPIC Spread Lavatory Faucet with EverClean Finish & SpeedConnect Drain Installation Instructions 708.80 Congratulations on purchasing your American Standard faucet with EverClean finish and Speed Connect
More informationInstallation Guide LiDCO Hemodynamic Monitor - Roll Stand Kit (US Version)
Installation Guide LiDCO Hemodynamic Monitor - Roll Stand Kit (US Version) The purpose of this guide is to describe assembly of the roll stand kit and mounting of applicable devices. Table of Contents.0
More informationInstallation Guide LiDCO Hemodynamic Monitor - Roll Stand Kit (EURO Version)
Installation Guide LiDCO Hemodynamic Monitor - Roll Stand Kit (EURO Version) The purpose of this guide is to describe assembly of the roll stand kit and mounting of applicable devices. Table of Contents.0
More informationCUP POINT M3 - M16 15
INDEX TRIVALENT METRIC ZINC PLATED SOCKET SCREWS PAGE TECHNICAL INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M3 - M8 6 M10 - M24 7 TECHNICAL INFORMATION 8-9 M3 - M10 10 M12 - M24 11 TECHNICAL INFORMATION
More informationINSTALLATION INSTRUCTIONS PART#: SR-GMR13796 SPARTAN RUNNING BOARD CHEVY EXPRESS 1500/2500/3500 GMC SAVANNA 1500/2500/ UP
INSTALLATION INSTRUCTIONS PART#: SR-GMR13796 SPARTAN RUNNING BOARD CHEVY EXPRESS 1500/2500/3500 GMC SAVANNA 1500/2500/3500 03-UP PARTS LIST: 1 Driver Side- 37 Spartan Running Board 8 12mm Hex Nuts 1 Passenger
More informationM4 x 14mm (x1) Silver Phillips Head Security Screw. Bolt Through Washers (x3)
SSKS SSKPB SSKW Component Checklist Installation Instructions SYSTEMA Systema Monitor Spring Arm Desk Mount HARDWARE 3/4/s Display Mounting s Desk Clamp VESA monitor head Arm Assembly M4 x 12/16/25mm (x4)
More informationDoor, Hatch & Interior Fittings
Sea Blue Security Locks NEW 10 Year Guarantee Sea Blue Security locks have been developed in the lock capital of England to withstand both corrosion and physical attack. Heavy steel full casings are used
More information20. Install and tighten the cap screws that hold the end frame and field frame together
4006-30 19. Fill the oil reservoir in the bearing bore of the end frame with SAE 10 engine oil. Then put the the end frame on the armature shaft. Align the marks on the end frame and field frame and push
More informationAir Commander Late Model Ford F-150
EASYSTREET Air Commander Late Model Ford F-150 www.airliftcompany.com MN-544 (02506) ECR 5206 Please read these instructions completely before proceeding with installation The oil level in the compressor
More informationCamlock Couplings Also referred to as Kamlock Couplings Quick Release Couplings
Camlock Couplings Also referred to as Kamlock Couplings Quick Release Couplings HCD Camlocks manufactured to NATO specifications Available in: Aluminum Sizes: 13-19-25-32-38-51-64-76-102-125-152-203 Polypropylene
More informationSPEAKMAN. SE-675 Installation, Operation, and Maintenance Instructions SAFE-T-ZONE EMERGENCY SHOWER AND EYE/FACE WASH
SE-675 Installation, Operation, and Maintenance Instructions SAFE-T-ZONE EMERGENCY SHOWER AND EYE/FACE WASH DESCRIPTION Floor mounted emergency deluge shower and non-aerated eye/face wash combination unit.
More informationInstallation Instructions Series Series
PORTSMOUTH Spread Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found onlyon American Standard faucets. Recommended
More informationCheck what you have received against the component checklist and hardware above.
SSS SSPW SSW SSPB SSB Component Checklist Installation Instructions SYSTEMA Systema Monitor Spring Arm HARDWARE Display Mounting Spacers (x4) 3/4mm Allen Keys Display Mounting Screws Arm Assembly VESA
More informationTiming Belt: Service and Repair Timing Belt Replacement
2003 Saturn Truck VUE V6-3.0L VIN B Copyright 2007, ALLDATA 9.50 Page 1 Timing Belt: Service and Repair Timing Belt Replacement Removal Procedure 1. Remove the front timing belt cover. 2. Rotate the crankshaft
More informationPneumatic or Electropneumatic Positioner for Rotary Actuators Type Fig. 1 Type 3761 Positioner. Mounting and Operating Instructions EB 8386 EN
Pneumatic or Electropneumatic Positioner for Rotary Actuators Type 3761 Fig. 1 Type 3761 Positioner Mounting and Operating Instructions EB 8386 EN Edition June 2004 Contents Contents Page 1 Design and
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
More informationHow to Replace TOKICO Shocks
How to Replace TOKICO Shocks Aftermarket Division Hitachi Automotive Systems, Ltd. Contents Prohibited Actions! 1. How to Replace Shocks 2. Replace Suspension Strut 3. Replace Suspension Units
More informationNew cylinder body allows small auto switches to be mounted on 4 surfaces.
Toggle Type Air Gripper ø32, ø4, ø5, ø63 New cylinder body allows small auto switches to be mounted on 4 surfaces. RoH Auto switch mounting rail removed. A round slot for mounting small auto switches is
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA TOYOTA SEQUOIA PART # P2067
INSTALLATION INSTRUCTIONS GRILLE GUARD 07-14 TOYOTA TUNDRA 08-14 TOYOTA SEQUOIA PART # P2067 PARTS LIST: GRILLE GUARD 1 Grille Guard 2 10mm Cam Lever Quick Release Bolts with Special Pivot Washer 1 Driver/left
More informationAC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
More informationINSTRUCTION, GPT HAND PUMP KIT (BUCHER PUMP) INSTALLATION
LIFT CORPORATION Sht. 1 of 27 DSG# M-15-13 Rev. A Date: 11/04/15 INSTRUCTION, GPT HAND PUMP KIT (BUCHER PUMP) INSTALLATION KIT P/N 296075-01 NEEDLE VALVE, ADJUSTABLE, SAE #6 P/N 906739-01 QTY. 1 CONNECTOR,
More informationPlastics & Packaging ONE STOP SHOPPING. Canada USA
T H E C O N V E Y I N G P R O D U C T S P E O P L E Plastics & Packaging C O N V E Y I N G P R O D U C T S G U I D E Canada 1-800-263-1942 USA 1-800-263-7782 sales@lorenz.ca www.lorenzproducts.com ISO
More informationYour Steering Column Specialist
Basic Installation Instructions for: ididit Universal Series Tilt Steering Columns What s inside: U-Joint & Shafting Installation Knob & Lever Installation Wiring your Column Synchronizing your Column
More informationHAND TOOLS WALL DRIVE PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 2011 PIECES
SPANNERS COMBINATION Short Arm Ratchet Combination Spanners Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms
More informationEasy assembly with standard tools. Fully insulated for direct mounting to steel panels
Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series and Receptacles are the proven industry standard
More informationRetro it Steering Column
Retro it Steering Column INSTALLATION INSTRUCTIONS for 1970-74 Cuda/Challenger FOR PART NUMBER S: 1620810010, 1620810020, 1620810051, 1620820010, 1620820020, 1620820051 S I NCE 1986 Instruction # 8000000005
More informationAutomatic Electronic Sport Mode Shifter Installation Instructions
Automatic Electronic Sport Mode Installation Instructions Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 tech@lokar.com www.lokar.com Release Automatic Electronic Sport Mode
More informationE3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 853PRO Series Hydraulic Concrete Saw (853PRO & 853PRO-FL Flush Cut Saw Models) Effective January 1, 2010 SERVICE PARTS 888-634-4289 & KITS 853PRO Series Hydraulic
More informationVALVE AND PLUMBING KIT 2409 LOADER CUB CADET & KIOTI TRACTORS
ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT 2409 LOADER CUB CADET & KIOTI TRACTORS TRACTOR MODELS CUB CADET 8404, 8454 KIOTI DK45, DK50 ROPS X X TRACTOR AND VALVE KIT GENERAL INFORMATION
More informationINSTALLATION INSTRUCTIONS FOR BRUTE IV EXTREME TM BELT DRIVE
INSTALLATION INSTRUCTIONS FOR BRUTE IV EXTREME TM BELT DRIVE FOR 1990 TO PRESENT EVO & TWIN CAM SOFTAILS Shown w/optional mid-shift control It s common knowledge that a belt drive primary can provide advantages
More informationTiming Belt Replacement
Timing Belt Replacement Tools Required Timing Belt Alignment Kit Crank Hub TORX Socket Removal Procedure 1. Disconnect the negative battery cable. 2. Remove the timing belt front cover. 3. Rotate the crankshaft
More informationInjectors-Chips-Clutches-Transmissions-Turbos-Engines-Fuel Systems
Swampʼs Diesel Performance Competition Parts For Your Diesel 304-A Sand Hill Rd. La Vergne, TN 37086 Tel 615-793-5573 or (866) 595-8724/ Fax 615-793-5572 Email: dave@swampsdiesel.com Regulated Fuel Return
More informationCorkSport ort Mazda 3 Adjustable Shifter Mazdaspeed 3, Mazda 3 6-speed and Mazda3 SkyActiv 6-speed
Part # Axl-6-963 CorkSport ort Mazda 3 Adjustable Shifter 2010-2013 Mazdaspeed 3, 2010-2013 Mazda 3 6-speed and 2012-2013 Mazda3 SkyActiv 6-speed Pre-Installation Notes: The CorkSport Adjustable Short
More informationSteel Conduits Conduit Fittings Flexible Conduits
Conduits Conduit Fittings Flexible Conduits CONTENT 1. INTRODUCTION VOLTECX products introduction and selecting VOLTECX 2. STEEL CONDUITS VOLTECX BS4568: Part 1: 1970 (Class 4) Conduit IEC 61386-21:2004;
More information62 Deck Idler Kit High Speed
Part No. 00 FORM NO. -899 6 Deck Idler Kit High Speed For Model 70 Serial No. 99000 to 99000 For Model 7 Serial No. 9900 to 99000 INSTALLATION INSTRUCTIONS Loose Parts Note: Use the chart below to identify
More informationVALVE AND PLUMBING KIT NEW HOLLAND 7310 LOADER NEW HOLLAND TRACTORS
ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT NEW HOLLAND 73 LOADER NEW HOLLAND TRACTORS MODEL 2WD FWA LESS CAB WITH CAB TT55 X X X TT75 X X X Valve and plumbing kit can be installed
More informationCARD RECORDER MECHANISMS
ITR Engineering Data Sheet 201 September 1927 CARD RECORDER MECHANISMS Card time recorders are used for registering on a card the time that employees enter and leave the factory. The card and the recorder
More informationASSEMBLY MANUAL OMS-90
ASSEMBLY MANUAL OMS-90 INTRODUCTION This manual should be used by an authorized TOPCON dealer only to assemble the Operation Microscope OMS-90. Two or more persons must assemble this instrument because
More informationVP RP BP GP HALOGEN FREE INSULATED TERMINALS. P range funnel entry OPERATING TEMPERATURE UP TO 115 C
VP RP P GP HAOGEN FREE INSUATED TERMINAS P range funnel entry OPERATING TEMPERATURE UP TO 115 C The P range of terminals has been designed, to meet the increasing demands for improved safety and reliability
More informationCompression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
More informationREQUIRES SPECIAL TOOLS TO INSTALL. SEE REPAIR INSTRUCTION MANUAL. 411 718 38 3 1027 1 127 127 127A 1080 1081 1028 127 718A 127 718 44B 718A 2 44A 493 44 1069 112 718B 1019 LABEL KIT 1058 OWNER S MANUAL
More informationTaps, Valves & Components. Section 1
Taps, Valves & Components Section 1 taps, valves & components index Index 1 SECTION PAGE sink taps 1.1-1.4 sink taps & spares 1.5 basin taps 1.6 general purpose taps & valves 1.7 flexible connectors, angle
More information04 Spanners and Wrenches
04 Spanners and Wrenches ouble open end spanner 73 Open slogging wrench 75 Combination Insulated wrench 75 76 spanner Offset ring spanner 78 Ring slogging wrench 80 Flat ring spanner 81 Offset ratchet
More informationStirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
More information2014 Cadillac ATS RESTRAINTS Seat Belts - ATS
Seat Belt Stop Button Procedure. Work the male half of the stop button through the hole in the webbing or at the marked location. 2. Align the female half of the stop button with the male half of the stop
More informationT-3161-T Texas T Distributor
T-3161-T Texas T Distributor NOTE: Please read completely through the instructions before installing your distributor. It will insure your installation goes smoothly. If you have installed a distributor
More informationVIBRATION CONTROL VIBRATION CONTROL
13 VIBRATION CONTROL Vibration Control Isomounts Isomounts are general-purpose vibration isolators suitable for mobile and static equipment installations. Available in three different sizes Isomounts come
More informationElectronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
More information!" # )("*"+,$' 0*.!0&!&1* &23# 0 &*&.444#3# 0
!" $%$&'( )("*"+,$' -.%%,$' /.%%,+% 0*.!0&!&1* &23 0 &*&.4443 0 INTRODUCTION Dear Customer Congratulations and thank you for purchasing a Powermover by Ultra-Fab. It is our intent to provide you with the
More informationINSTRUCTION, GPT HAND PUMP KIT INSTALLATION GPT KIT P/N
LIFT CORPORATION Sht. 1 of 28 DSG# M-09-16 Rev. B Date: 4/22/2014 INSTRUCTION, GPT HAND PUMP KIT INSTALLATION GPT KIT P/N 283330-01 NEEDLE VALVE, ADJUSTABLE, SAE #6 P/N 906739-01 QTY. 1 CONNECTOR, SAE
More informationNEW PRODUCTS MOULD MAKING II / E 3330 and E 3360 Compact slide units. Order now from our online shop!
NEW PRODUCTS MOULD MAKING II / 2016 Order now from our online shop! www.meusburger.com E 3330 and E 3360 Compact slide units High-precision and ready-to-use compact slide units with extremely slim design
More informationCABLE CUTTER INSTRUCTION MANUAL
INSTRUCTION MANUAL For additional copies at no charge order 999 6443.0 750 CABLE CUTTER Read and understand all of the instructions and safety information in this manual before operating or servicing this
More informationINSTALLATION INSTRUCTION Rev A
INSTALLATION INSTRUCTION 88587 Rev A FOR RANCHO SUSPENSION SYSTEM RS6587B: 2009 DODGE RAM 1500 READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION IMPORTANT NOTES! WARNING:
More informationFord AOD-4R70W-AODE Cable Operated Shifter Installation Instructions
Ford AOD-4R70W-AODE Cable Operated Shifter Installation Instructions Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 tech@lokar.com www.lokar.com Ford AOD-4R70W-AODE Cable
More informationSection One. Steel Underground. PVC Accessories Bolt-on Dresser Fittings Solvent PVC Pipe Fittings Gasketed PVC Pipe Fittings
Page Steel Underground Section One Powder Coated Steel Fittings Galvanized Steel Fittings PVC Fittings Riser Valves Clampon Saddles, Couplers, Male Ends Repair Couplers PVC Accessories Bolton Dresser Fittings
More informationContents TRANSOM CLOSER 690 SERIES 23 LOCK OF GLASS DOOR 800 SERIES 24 AUTO HINGE 820 SERIES 25 PANIC EXIT DEVICE 910 SERIES 26
www.usaf.com.tw Contents ELECTRIC STRIKE 100 SERIES 1 E-SAVE SLIDER 171 SERIES 2 SHOWER HINGE 230 SERIES 3 SHOWER HINGE 240 SERIES 4 FREE HINGE 20 SERIES GLASS CONNECTOR 280 SERIES 6 PVC GASKET 290 SERIES
More informationJBR Adjustable Short Shift Plate Kit Pre-Installation Instructions. Attaching the stand-off to the Shift Plate
JBR Adjustable Short Shift Plate Kit Pre-Installation Instructions Attaching the stand-off to the Shift Plate 1. With the Shift Plate facing up, insert the male end of the stand-off through the slotted
More information