Impact Sockets & Accessories
|
|
- Rhoda Webster
- 5 years ago
- Views:
Transcription
1 HEAVY BOLTING APPLICATIONS Impact Sockets & Accessories A complete solution for every tool application Ph: 1300 WALTAN ( )
2 6 POINT SOCKETS 12 POINT SOCKETS IN-HEX DRIVERS ADAPTORS UNIVERSAL JOINTS EXTENSIONS TUBE SOCKETS LOCKING PINS & RINGS SLOGGING SPANNERS 1" DRIVE, ULTRA TORQUE 1-2 3/4" DRIVE, IMPERIAL STANDARD 3 DEEP 4 METRIC STANDARD 5 DEEP 6 1" DRIVE, IMPERIAL STANDARD 7 DEEP 8 METRIC STANDARD 9 DEEP /2" DRIVE, IMPERIAL STANDARD 11 DEEP 12 METRIC STANDARD 13 DEEP /2" DRIVE, IMPERIAL STANDARD 15 METRIC STANDARD 16 3/4" DRIVE, IMPERIAL STANDARD 17 DEEP 18 METRIC STANDARD 19 DEEP 20 1" DRIVE, IMPERIAL STANDARD 21 DEEP 22 METRIC STANDARD 23 DEEP /2" DRIVE, IMPERIAL STANDARD 25 DEEP 26 METRIC STANDARD 27 DEEP 28 3/4" DRIVE, IMPERIAL & METRIC 29 1" DRIVE, IMPERIAL & METRIC /2" DRIVE, IMPERIAL & METRIC 31 1/2", 3/4", 1", 1-1/2", 2-1/2" DRIVE 32 1/2", 3/4", 1", 1-1/2", 2-1/2" DRIVE 33 1/2", 3/4", 1", 1-1/2", 2-1/2" DRIVE 34 1/2", 3/4", 1", 1-1/2" DRIVE 35 TO SUIT 3/4", 1", 1-1/2", 2-1/2" DRIVE 36 FLAT RING, IMPERIAL 37 METRIC 38
3 AND ACCESSORIES 6 Point 12 Point In-Hex Adaptors Available in drives Available in drives Available in drives Available in all 1/4, 3/8, 1/2, 3/4, 1, 1/4,3/8, 1/2 3/4, 1/4, 3/8, 1/2,3/4, combinations 1-1/2, 2-1/2 1, 1-1/2,2-1/2 1, 1-1/2 Standard and Deep Series Imperial and Metric Standard and Deep Series Imperial and Metric Imperial and Metric Also available in Sleeve Type Universal Joints & Extensions Extra long for Tube Sockets Slogging Spanners Socket Sets Available in drives Available in drives Available in sizes Available in many 1/4, 3/8, 1/2, 3/4, 1, 1/2, 3/4, 1,1-1/2 5/8 AF to 6-1/8 AF drives and size ranges 1-1/2, 2-1/2 Hollow design 22 AF to 155 AF Standard and Deep Series Extensions with many length options Perfect for WHEEL NUTS and long studs Also available in Open End and Offset Ring Imperial and Metric
4 1
5 ULTRA TORQUE SOCKETS 1 DRIVE-UNIFORM LENGTH Part No Size D2 D1 L2 L Metric Imperial / * / * / * / * / * * * / * / * * / * * / * / * * * * / / * * / * / * * / * / / / * / * 2
6 3/4" DRIVE IMPERIAL STD LENGTH /2" /16" /16" /8" /8" /16" /16" " /4" /16" /16" /8" /8" /16" /16" /4" " /16" /16" /8" /8" /16" /16" /2" /4" /16" /16" /8" /8" /16" /16" /4" /2" /16" /16" /8" /8" /16" /16" " /4"
7 3/4" DRIVE IMPERIAL DEEP /2" /16" /16" /8" /8" /16" /16" " /4" /16" /16" /8" /8" /16" /16" /4" " /16" /16" /8" /8" /16" /16" /2" /4" /16" /16" /8" /8" /16" /16" /4" /2" /16" /16" /8" /8" /16" /16" " /4"
8 3/4" DRIVE METRIC STD LENGTH mrn O
9 3/4" DRIVE METRIC DEEP
10 1" DRIVE IMPERIAL STD LENGTH /8" /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" /2" " /16" /16" /8" /8" /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" " /2" /8" /16" /4" /8" /8" /16" /2" /4" /8" /16" /4" /8" /8" /16" " " /8" /16" /4" /8" /2"
11 1" DRIVE IMPERIAL DEEP /8" /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" /2" " /16" /16" /8" /8" /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" " /2" /8" /16" /4" /8" /8" /16" /2" /4" /8" /16" /4" /8" /8" /16" " " /8" /16" /4" /8" /2"
12 1" METRIC STD LENGTH
13 1" DRIVE METRIC DEEP
14 1-1/2" DRIVE IMPERIAL STD LENGTH /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" /2" /2" /16" /16" /8" /8" /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" " " /16" /16" /8" /8" /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" /2" /2" /16" /8" /8" /4" /16" /8" /4" " /16" /8" /8" /4" /16" /8" " /2" /16" " /8" /2"
15 1-1/2" DRIVE IMPERIAL DEEP /8" /16" /16" /8" /2" /16" /16" /4" /8" /16" /16" /8" /4" /16" /16" /2" /8" /16" /16" /8" " /16" /16" /4" /8" /16" /16" /8" /4" /16" /16" " /8" /16" /16" /8" /2" /16" /16" /4" /8" /16" /16" /8" /4" /16" /16" /2" /8" /8" /16" /4" "
16 1-1/2" DRIVE METRIC STD LENGTH
17 1-1/2" DRIVE METRIC DEEP
18 2-1/2" DRIVE IMPERIAL STD LENGTH " /8" /16" " /8" /8" /16" /4" /4" /8" /16" /2" /8" /8" /16" /4" /2" /8" /16" " /8" /8" /16" /4" /4" /8" /16" /2" /8" /8" /16" /4" " /8" /8" " /4" /8" /8" /2" /16" /8" /2" /8" /8" " /4" /4" /8" /16" " /8" /8" /2" /4" /8" /8" /4" /2" /8" /8" " /4"
19 2-1/2" DRIVE METRIC STD LENGTH
20 3/4 DRIVE IMPERIAL 12 POINT STD LENGTH /2" /16" /16" /8" /8" /16" /16" " /4" /16" /16" /8" /8" /16" /16" /4" " /16" /16" /8" /8" /16" /16" /2" /4" /16" /16" /8" /8" /16" /16" /4" /2" /16" /16" /8" /8" /16" /16" " /4"
21 3/4 DRIVE IMPERIAL 12 POINT DEEP /2" /16" /16" /8" /8" /16" /16" " /4" /16" /16" /8" /8" /16" /16" /4" " /16" /16" /8" /8" /16" /16" /2" /4" /16" /16" /8" /8" /16" /16" /4" /2" /16" /16" /8" /8" /16" /16" " /4"
22 3/4 DRIVE IMETRIC 12 POINT STD LENGTH
23 3/4 DRIVE METRIC 12 POINT DEEP
24 1 DRIVE IMPERIAL 12 POINT STD LENGTH /8" /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" /2" " /16" /16" /8" /8" /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" " /2" /8" /16" /4" /8" /8" /16" /2" /4" /8" /16" /4" /8" /8" /16" " " /8" /16" /4" /8" /2"
25 1 DRIVE IMPERIAL 12 POINT DEEP /8" /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" /2" " /16" /16" /8" /8" /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" " /2" /8" /16" /4" /8" /8" /16" /2" /4" /8" /16" /4" /8" /8" /16" " " /8" /16" /4" /8" /2"
26 1 DRIVE METRIC 12 POINT STD LENGTH
27 1 DRIVE METRIC 12 POINT DEEP
28 1-1/2 DRIVE IMPERIAL 12 POINT STD LENGTH /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" /2" /2" /16" /16" /8" /8" /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" " " /16" /16" /8" /8" /16" /16" /4" /4" /16" /16" /8" /8" /16" /16" /2" /2" /16" /8" /8" /4" /16" /8" /4" " /16" /8" /8" /4" /16" /8" " /2" /16" " /8" /2"
29 1-1/2 DRIVE IMPERIAL 12 POINT DEEP /16" /16" /4" " /16" /16" /8" /8" /16" /16" /2" /4" /16" /16" /8" /8" /16" /16" /4" /2" /16" /16" /8" /8" /16" /16" " /4" /16" /16" /8" /8" /16" /16" /4" " /16" /16" /8" /8" /16" /16" /2" /4" /16" /16" /8" /8" /16" /16" /4" /2" /16" /8" /8" /4"
30 1-1/2 DRIVE METRIC 12 POINT STD LENGTH
31 1-1/2 DRIVE METRIC 12 POINT DEEP
32 IMPACT IN-HEX DRIVERS 3/4 DRIVE IN-HEX DRIVER Part No Size AF D2 L1 L Part No Size AF D2 L1 L /8" /16" /2" /16" /8" /16" /4" /16" /8" /16" " /16" /8" /16" /4" /16" /8" /16" /2"
33 IMPACT IN-HEX DRIVERS 1 DRIVE IN-HEX DRIVER Part No Size AF D2 L1 L Part No Size AF D2 L1 L /16" /2" /16" /8" /4" /16" /8" " /16" /8" /16" /4" /16" /8" /2" /8" /4" /16"
34 IMPACT IN-HEX DRIVERS 1-1/2 DRIVE IN-HEX DRIVER Part No Size AF D2 L1 L Part No Size AF D2 L1 L /4" /16" /8" /16" " /16" /8" /16" /4" /16" /8" /2" /8" /4" /16" " /8" /16"
35 IMPACT ADAPTORS Part No Female Male D2 L /4" 1" " 3/4" " 1-1/2" /2" 1" /2" 2-1/2" /2" 1-1/2" IMPACT ADAPTORS SLEEVE TYPE-WITH MAGNETS Part No Female Male D2 L /4" 1" " 1-1/2" /2" 2-1/2" /2" 3-1/2"
36 UNIVERSAL JOINTS Part No Female Male D2 L /4" 3/4" " 1" /2" 1-1/2" /2" 2-1/2" HEAVY DUTY HEAVY DUTY Part No Female Male D2 L " 1"
37 IMPACT EXTENSIONS Part No Female Male D2 L Part No Female Male D2 L /4" 3/4" /2" 1-1/2" /4" 3/4" /2" 1-1/2" /4" 3/4" /2" 1-1/2" /4" 3/4" /2" 2-1/2" /4" 3/4" /2" 2-1/2" /4" 3/4" /2" 2-1/2" /4" 3/4" /4" 3/4" /4" 3/4" /4" 3/4" " 1" " 1" " 1" " 1" " 1" " 1" " 1" " 1" " 1" " 1"
38 TUBE SOCKETS IMPACT RATED HOLLOW DESIGN D2 d D1 L L2 1/2 drive, 12 Point Part No Size AF D2 D1 L2 L d /2 drive, 12 Point Part No Size AF D2 D1 L2 L d /4" /16" /16" /16" /8" /16" /4" /16" /8" /16" /2" /4 drive, 6 Point Part No Size AF D2 D1 L2 L d drive, 6 Point Part No Size AF D2 D1 L2 L d /2 drive, 6 Point Part No Size AF D2 D1 L2 L d
39 LOCKING PINS & RINGS FITS SOCKET DRIVE END PINS Part No Size For Drive d L End x x x x RINGS Part No Size For Drive D W End x x x x x
40 SLOGGING SPANNERS IMPERIAL FLAT RING OPEN END AND OFF SET RING ALSO AVAILABLE Part No Size AF L Weight Part No Size AF L() Weight Kg Kg /8" /2" /16" /16" /4" /8" /16" /16" /8" /4" /16" /16" " /8" /16" /16" /8" " /16" /16" /4" /8" /16" /4" /8" /8" /16" /2" /2" /8" /16" /4" /8" /8" /16" " /4" /8" /16" _1/4" /8" /2" /16" /8" ' /4" /16" " /8" /8" /16" /8" /4" /4" /16" " /8" /8" /16"
41 SLOGGING SPANNERS METRIC FLAT RING OPEN END AND OFF SET RING ALSO AVAILABLE Part No Size AF L Weight Part No Size AF L() Weight Kg Kg
42 TOOL SERVICING & REPAIRS MINING, CONSTRUCTION & GENERAL INDUSTRY FREE WRITTEN QUOTES-NORMALLY WITHIN 24 HOURS PNEUMATIC TOOLS HAND HELD HYDRAULIC TOOLS ELECTRIC TOOLS TORQUE TROOLS CALIBRATION AND CERTIFICATION TEST AND TAG THE SERVICE/REPAIR SCHEDULE THAT WE PROVIDE Raise a Job Card for each tool and enter the tool information into our data base thereby recording tool history Test tool performance to establish service/repair requirement Dismantle, clean and inspect the tool Provide a free written quote outlining the tool requirements Replace or repair damaged/worn parts as required. If the tool is beyond economical repair a quote for a new replacement tool will be provided Test output and performance of the repaired tool Provide a Service/Repair report with each tool Issue a Calibration Certificate for Torque tools (NATA Traceable)
04 Spanners and Wrenches
04 Spanners and Wrenches ouble open end spanner 73 Open slogging wrench 75 Combination Insulated wrench 75 76 spanner Offset ring spanner 78 Ring slogging wrench 80 Flat ring spanner 81 Offset ratchet
More informationWrenches. Slogging wrenches Open ended impact slogging wrenches. Double flex wrenches. Ring type impact slogging wrenches.
Slogging wrenches Open ended impact slogging wrenches. Stock Size Length Width Height Price No mm mm mm mm 902024 24 178 14.5 2.4 22.50 902027 27 180 15.5 25.2 22.50 90200 0 190 16.2 0.0 27.50 90202 2
More information< Back to LawlessGroup.com
Combination Wrench Sets Four sets available two SAE sets and two Metric sets Full-polished, mirror chromeplated finish Meet or exceed ASME B107.100 standards for combination wrenches 12-point box end with
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More informationUNIVERSAL BRACKET SET FLEXIBLE MOUNTING KIT FOR VARIOUS PRODUCTS PART NUMBER: 79160
DO NOT ATTEMPT TO INSTALL OR USE A PRODUCT UNTIL YOU HAVE READ AND UNDERSTAND THE USER MANUAL AND SAFETY LABELS. UNIVERSAL BRACKET SET FLEXIBLE MOUNTING KIT FOR VARIOUS PRODUCTS PART NUMBER: 7960 PRODUCT
More information2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More information1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More information1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationGeneral Maintenance Tool Kit (GMTK) Drawer layout
26 2 8 6 5 32 31 35 25 11 9 33 7 24 23 22 28 21 20 27 19 18 17 34 16 15 10 14 13 12 4 3 30 1 General Maintenance Tool Kit (GMTK) Drawer layout COMP # DESCRIPTION BRAND PART NO. WARRANTY 1-3/16 Drawer,
More informationAustralian Transport Manufacturers Pty Ltd. Tooling Catalogue
AMT Australian Transport Manufacturers Pty Ltd Tooling Catalogue Australian Transport Manufacturers Pty Ltd. ABN: 87 140 887 501 TELEPHONE: (07) 3277 5111 FAX: (07) 3875 1945 WEB: www.austranman.com.au
More informationLubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
More information07 Sockets. 3/8 sq. dr. socket. 1/4 sq. dr. socket. 1/2 sq. dr. socket. Automotive socket. 1 sq. dr. socket. Insulated socket. 3/4 sq. dr.
07 /4 sq. dr. socket 9 3/8 sq. dr. socket 34 / sq. dr. socket 36 Automotive socket 4 Insulated socket 44 3/4 sq. dr. socket 46 sq. dr. socket 48 Impact socket 49 /4 sq. dr. socket set Extending ratchet
More informationHAND TOOLS WALL DRIVE PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 2011 PIECES
SPANNERS COMBINATION Short Arm Ratchet Combination Spanners Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms
More informationREQUIRES SPECIAL TOOLS TO INSTALL. SEE REPAIR INSTRUCTION MANUAL. 411 718 38 3 1027 1 127 127 127A 1080 1081 1028 127 718A 127 718 44B 718A 2 44A 493 44 1069 112 718B 1019 LABEL KIT 1058 OWNER S MANUAL
More informationWrenches. Combination Wrench
Combination Wrench Open End Wrench Offset Rin Wrench Star Box End Wrench Flare Nut Wrench Flexible Crow Foot & Rin Socket Wrench Swivel Head Socket Wrench Sluin Wrench Heavy Duty Wrench Speed Wrench Anled
More informationFittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
More informationHigh visibility laser etched markings provide quick size identification. A secondary hard stamp marking provides permanent identification.
IMPACT SOCKET GUIDE INCLUDES: 1/4",, and 3/4" Drive Open Stock Sockets, Sockets, Bit Sockets, Sets, Extensions & Adapters STRENGTH SPEED TECHNOLOGY Sockets and extensions are made from impact grade Chrome
More informationSCREWDRIVER SETS 8 PIECE FLARED & POZIDRIV SCREWDRIVER SET PIECE TORX SCREWDRIVER SET 8 PIECE 1000 VOLT INSULATED SCREWDRIVER SET
Quality Since 1908 SCREWDRIVER SETS 8 PIECE FLARED & POZIDRIV SCREWDRIVER SET Slotted Tips: 3.5x75, 4x100, 5.5x100, 6.5x150, 8x150 Pozidriv Tips: Pz1x100, Pz2x125, Pz0x75 26.35 11.26 List Price 37.61 Ref:
More informationATLANTIC PLASTICS is a company of. Gunmetal Service Fittings Data Sheet
ATLANTIC PLASTICS is a company of Gunmetal Service Fittings Data Sheet EBCO - Service Connections The EBCO range of gunmetal service fittings covers a variety of pipe material and sizes. Fittings for steel
More informationNEW FOR POLE POSITION DEALS PREMIUM QUALITY. PROFESSIONAL PRODUCTS. OCT JAN 2019 IN THIS ISSUE:
BUILTÊ ÊTOÊLASTÊA L PREMIUM QUALITY. PROFESSIONAL PRODUCTS. I F E T I M E OCT 2018 - JAN 2019 IN THIS ISSUE: Project Car Tool Storage Sockets & Accessories Spanners & Wrenches Fastening Tools Torque Control
More informationCombination Spanners 125. Deep Ring Spanners 141. Swivel Head Wrenches 145
116 117 Spanners Ratchet Spanners 12 Combination Spanners 125 Double Ended Ring Spanners 129 Open Ended Spanners 14 Deep Ring Spanners 141 Slogging Spanners 142 Crowfoot Spanners 144 Swivel Head Wrenches
More informationA Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
More information304C. Valve Group. Series Farris Engineering Pressure Relief Valves
304C Valve Group Series 600 Farris Engineering Pressure Relief Valves Type Numbering System Our type numbering system simplifies the selection and specifying of Farris pressure relief valves because the
More informationGN 23. Stainless Steel-Levelling feet
GN 23 Stainless Steel-Levelling feet technical informations Specification Type (Base plate) - Type D0: fine turned, without rubber underlay - Type D1: fine turned, with rubber underlay, inlaid, black Version
More informationPratley Ezee-Fit Box Replacement Gaskets Replacement Gasket for the Pratley Ezee-Fit Box
Pratley Ezee-Fit Box Covers Ex e/n Either standard or polycarbonate (transparent) Supplied complete with stainless steel cheese head screws and rubber gasket ready to fit Pratley Ezee-Fit Box Replacement
More informationRYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L REPAIR SHEET
RYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L REPAIR SHEET 119 96 83 1 84 85 116 86 114 92 82 117 113 112 115 97 175 176 120 177 121 1 2 3 122 81 87 128 164 1 80 88 174 114 6 53 163 19 3 141
More informationACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / /
Series 90000 ompact Actuators D/91000/, D/93000/ Single acting Ø 12... 63 mm ne third the basic length of a corresponding IS/VDA model ow friction, long life seal design Fully non-corrodible specification
More informationENG-05, Camshaft (Timing) Belt and Balance Shaft Belt Removal
ENG-05, Camshaft (Timing) Belt and Balance Shaft Belt Removal Tools Jack stands Floor Jack Metric Socket set Metric Wrench set Porsche Timing Belt Tension tool (P9201) Flywheel Lock (P9206) Balance Shaft
More informationSIOUX TOOLS INDUSTRIAL CATALOG ASSEMBLY TM SERIES TORQUE MULTIPLIERS
SIOUX TOOLS INDUSTRIAL CATALOG ASSEMBLY TM SERIES TORQUE MULTIPLIERS RATM50-25 Right Angle Tools Drive Size Torque Speed Gear 1 Gear 2 Gear 1 Gear 2 Weight in mm ft lb Nm ft lb Nm rpm rpm lb kg db(a) RATM50-07
More informationOctober & November 2017 Retail Specials Available From
October & November 2017 Retail Specials Available From ARX-TD40P-TM 40Pcs Metric Tap & Die Set Tap & Die Sizes 3M0.5 3M0.6 4M0.7 4M0.75 5M0.8 5M0.9 6M0.75 6M1.0 7M0.75 7M1.0 8M1.0 8M1.25 10M1.25 10M1.5
More informationEdition 7 February QA4 Air Angle Wrench and Nut Runner. Parts Information. Save These Instructions
80603 Edition 7 February 0 QA Air Angle Wrench and Nut Runner Parts Information Save These Instructions Module - Exploded View 8 7 5 6 8 3 0 9 9 5 0 5 53 5 7 55 3 0 56 57 6 7 5 3 33 3 8 9 6 63 6 65 66
More informationC35. Assembly Instructions. Mobius Floor Lamp & C Page 1 of 7. Prepare Base (Figures 1& 2)
Mobius Floor Lamp 23-4505 & 23-4505C Page 1 of 7 Prepare Base (Figures 1& 2) A 8-32 Screw (2) B Wireway Cover Plate C Base D Lower Pipe Assembly E Threaded Stud (4) F Hex Nut (4) 1. Carefully unpack the
More informationAuto Air Valve Parts List
Auto Air Valve Parts List 1 Cap 1 2 O Ring 1 3 Cover 1 4 Lock Nut 5/16 UNF 1 5 Flat Washer 8mm 2 6 Flat Washer 2 7 Diaphragm 1 8 Guide bush 1 9 O Ring 1 10 O Ring 1 11 Shaft 1 12 Flat Washer 1 13 Seat
More informationPIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
More informationMINIMAT Screwdrivers. Handheld Screwdriver pneumatic
Screwdriving Technology Automation Air Motors Air Tools MINIMAT Screwdrivers The basic solution for almost all screwdriving tasks angle head design torque from 0.3-65 Nm / 3 to 575 in.lbs robust highest
More informationC35 Mobius Floor Lamp & C Page 1 of 7
Mobius Floor Lamp 23-4505 & 23-4505C Page 1 of 7 Prepare Base (Figures 1& 2) A 8-32 Screw (2) B Wireway Cover Plate C Base D Lower Pipe Assembly E Threaded Stud (4) F Hex Nut (4) 1. Carefully unpack the
More informationASTRO AMC-2000 SERIES ENVELOPE FEEDER
ASTRO AMC-2000 SERIES ENVELOPE FEEDER PARTS CATALOG GROUP 1 Page 1 KEY # PART # DESCRIPTION QTY. KEY # PART # DESCRIPTION QTY. 1. 84-100-56B FRONT FRAME CLOSURE 1 24. 84-125-108 RETAINER STRAP ASSEMBLY
More informationSTAR. series. 2-Stage Servovalve Flight Simulation Motion Control. Features
STAR series 99 2-Stage Servovalve Flight Simulation Motion Control Features Maximum operating pressure 14 bar ISO 1372-6-5--92 mounting pattern Internal pilot supply (4 port) Low hysteresis & zero point
More informationASTRO AMC-2000 SERIES ENVELOPE FEEDER
ASTRO AMC-2000 SERIES ENVELOPE FEEDER PARTS CATALOG GROUP 1 Page 1 GROUP 1 1. 84-100-56B FRONT FRAME CLOSURE 1 25. 84-130-20 SKID WHEEL ASSEMBLY 1 2. 71-140-08 FRONT ENV. GUIDE ASSEMBLY, R/H 1 26. 123-0407
More informationSpanners. Spanners. Open-ended spanners DIN 3110 Chromium plated - < 15
Spanners Open-ended spanners IN 3110 Chromium plated - < 15 35201 Metric sizes 35301 Inch sizes 3,2 x 5,5 4 x 5 1/4 x 9/32 (6,3 x 7,1) 6 x 7 1/4 x 5/16 (6,3 x 7,9) 6 x 8 7 x 8 7 x 9 8 x 9 8 x 10 11/32
More information37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationBetabite Fittings. Hardy Spicer, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph:
Betabite Fittings, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph: 1300 30 673 Disclaimer The information and dimensions listed in these catalogues is correct to the best of our knowledge
More informationWELZH. VALID TO 31ST AUGUST WERKZEUG
WELZH. VALID TO 31ST AUGUST WERKZEUG 1 Hub Mate Supporting Adaptor 3200-ww 80.00 RRP Must have item for any garage! Designed for supporting Control Arms. The HUB MATE SUPPORTING ADAPTOR is used in conjunction
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationRED GOAT A Series Disposers A Series Disposers Call for Pricing on New Unit! 500 (800) 877-2662 WWW.WHALEYFOODSERVICE.COM ITEM PART NOTE: * For female-threaded motor shafts only 1 06-HA-ST4 Silver Saver:
More informationMINIMAT Control Screwdrivers
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver pneumatic MINIMAT Control Screwdrivers The basic solution for almost all screwdriving tasks angle head design torque from 0.3-65
More informationFP 106 x PTM - PS
Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:
More informationSuspension & Tyres Protection
Ball Joint Separator (Japnees Cars) Product Code : ITCP1015 Heat treated drop forged steel body Spreads ball joint easily where there are space constraints Jaws open 19mm Ball Joint Separator European
More information82 SERIES PTO PARTS LIST AND SERVICE MANUAL
82 SERIES PTO PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. 18 ft.lbs. (use 242 Loctite) 82 SERIES PTO EXPLODED VIEW 16 ft.lbs. 10 ft.lbs. (use 242 Loctite) 18 ft.lbs. 45 ft.lbs. (use 242 Loctite)
More informationFollowing symbols can be found next to text outlining important information.
Revision J, October 2016 641 mm Profile Panel Antennas General This instruction manual contains all necessary information required to assist in the correct installation of Panel Antennas of 641 mm (25.2
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationSAB 202 Screw compressor units. S pa re parts m an ual
SAB 202 Screw compressor units S pa re parts m an ual en 1 Spare parts list for SAB 202 Pos Designation No Part no Complete compressor LF, aut Vi 4161059 Complete compressor LF, man Vi 4161060 Complete
More informationVFS 90 (ORFS) Flare tube fitting
according to SAE J1453 and ISO 8434-3 For various tube wall thicknesses in metric or inch dimensions Quick, easy and safe installation Radial installation of the tube Captive/soft seal High nominal pressures
More informationEngineering Data. Single Reduction Parts List. Item # Description
Single Reduction Basic Single Reduction Unit. Gear Housing. Pipe Plug. Vent Plug 4. Splash Guard. Input Cover. O-Ring. Hex Head Cap Screw 8. Input Oil Seal 9. Input Bearing. Input Bearing *. Retaining
More informationSHANGHAI PRIMO TOOLS CO.,LTD
HYDRAULIC BOLTING TOOLS SHANGHAI PRIMO TOOLS CO.,LTD www.primotorc.com BRIEF INTRODUCTION OF THE COMPANY Shanghai Primo Tools Co., Ltd is a professional manufacturer of bolting tools including hydraulic
More informationconnection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationAustralian Transport Manufacturers Pty Ltd. Tooling Catalogue
AMT Australian Transport Manufacturers Pty Ltd Tooling Catalogue Australian Transport Manufacturers Pty Ltd. ABN: 87 140 887 501 TELEPHONE: (07) 3277 5111 FAX: (07) 3875 1945 WEB: www.austranman.com.au
More informationMinimally protruding jaw shank for greater capacity in tight spaces.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationseries 2-Stage Servovalve Rated flows up to 55 l/m Features
series 456 2-Stage Servovalve Rated flows up to 55 l/m Features Standard & high response versions Maximum operating pressure 15 bar Special mounting pattern Internal pilot supply (4 port) Suitable for
More informationILD LOCK CYLINDER CHANGE-OUT INSTRUCTIONS REVISION 2_012505
1. TOOLS REQUIRED for ILD LOCK CYLINDER CHANGE-OUT a. 3/16 Hex Allen Wrench b. Phillips Screwdriver c. 1-3/8 Deep Socket or Adjustable Wrench d. Blocks to support ILD 2. LOCK CYLINDER ASSEMBLY REMOVAL,
More informationProfessional Quality Tools. 80th Anniversary Edition. Established 1935
2016 Catalogue FRANKLIN Professional Quality Tools 80th Anniversary Edition Established 1935 1 2 2 Contents FRANKLIN Professional Quality Tools 01 Socketry 4 02 Spanners 40 03 Screwdrivers 48 04 Pliers
More informationBerkeley Cast Iron Impeller B1-1/2ZPH ELECTRIC MOTOR DRIVE. Threaded Case (NPT), Packing Construction. Table I. Table II
Cast Iron Impeller B-/ZPH Threaded Case (NPT), Packing Construction Page 50. Date March 4, 03 Supersedes 07/0/ 3 B/M HP PH RPM "U" Dim. Imp. Dia. Imp. B53759 5 3 3600 -/4" 7.94" M07666 B596 0 3 3600 -/4"
More informationMX-1408 SELF-CONTAINED EXTRACTOR REPLACEMENT PARTS LIST
MX-1408 SELF-CONTAINED EXTRACTOR REPLACEMENT PARTS LIST SECTION 100 - TANK ASSEMBLY Ref Part Description Part 2 Dome w/filter (#2 & 8) 402478 3 Complete Solution Tank Cover 423130 5 Dome w/filter & Gasket
More informationStandard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
More informationNutrunners Transducerized Type
Nutrunners Transducerized Type Tensor STB offers genuine ergonomic Low tool weight and high spindle speed reduce cycle time. Freedom of movement in all working positions. Lightweight components help reduce
More informationseries 2-Stage Servovalve Rated flows up to 80 l/m Features
series 65 2-Stage Servovalve Rated flows up to 8 l/m Features Maximum operating pressure 15 bar ISO 172-4-4--92 mounting pattern Internal pilot supply (4 port) Suitable for -way or 4-way applications High
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationILT - Series. Troubleshooting: ILT Twinfold Dual Cylinder Folding Unit
- Troubleshooting: Twinfold Dual Cylinder Folding Unit Table of content: Page 1) Gate overview...2 2) Gate does not lower down.3 3) Gate is not lifting up....4 4) Electrical schematic 5 5) Hydraulic schematic...6
More informationWhat can take you beyond the limit?
Wera tools for better working results. Together with its more than 600 employees and in just over 70 years, the company with its main office at Wuppertal, Germany has developed into one of the world s
More informationPlease follow the procedure marked with this symbol precisely. Non-compliance may lead to damage of the product.
Revision L, October 2016 Mounting Kits for Single Band 160mm (6.3 ) Profile Panel Antennas F-074-S4, T-075-S4 & T-095-S4 General This instruction sheet contains all necessary information required to assist
More informationModels: D-12, G-12. Parts Manual D D WANNER ENGINEERING, INC.
Parts Manual D12-991-2402D Models: D-12, G-12 IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries
More informationDisc Brake & Components
Disc Brake & Components DISC BRAKES Disc Brake Kits ( * All Silver Cadmium Kits are available with either Silver Cadmium or Stainless Steel Calipers.) Capacity Description CSA Certified 1,750 lbs. 3,000
More informationInserting Tools for Screwdrivers
Screwdriving Technology Automation Air Motors Air Tools Inserting Tools for Screwdrivers nbits nsockets nfinders nbit holders With the longest lifetime and highest wear resistance combined with the best
More information1/4" SOCKET WRENCH SETS
1/4" SOCKET WRENCH SETS All components are forged from high quality Chrome Vanadium steel Torque-Drive sockets contact the fastener on the sides rather than the corners, reducing corner rounding and allowing
More informationTorque Screwdriver Models 1.5 N.m to 6 N.m (13 lbf.in to 53 lbf.in) Adjustables - N.m Adjustables - lbf.in Production P Type
Torque Screwdriver s 1.5 N.m to 6 N.m (13 lbf.in to 53 lbf.in) Norbar s new range of Torque Screwdrivers embodies the values of the TT series: accuracy, ease of use and comfort in use.with an accuracy
More informationFLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome 2 is
More informationBOLT TIGHTENING SOLUTIONS
BOLT TIGHTENING SOLUTIONS We offer a complete and dynamic range of bolting We offer complete and dynamic range of bolting tools including tools including hydraulic bolt tensioners and hydraulic hydraulic
More informationHollow Cone Nozzles. The H series nozzle option diverts flow at a right angle without an internal vane, thereby reducing the risk of blockage.
lower energy ring of spray useful for low flow, low impact applications. The internal geometry swirls fluid into a circular ring spray pattern. tomisation occurs at low pressures. The H series nozzle option
More informationBRASS HOSE BARBS G21B
BRASS HOSE BARBS For clamshell packaged parts add: PAK to the part number. Eg... G20B-025:PAK, etc. Part Pipe Hose PRICE EACH Pkg Number Size I.D. PAK Loose Std Pkg Qty G2B45 45 MALE NPT HOSE BARB Part
More informationSTAR. series. 2-Stage Servovalve Rated flows up to 20 l/m. Features
STAR series 454 2-Stage Servovalve Rated flows up to 2 l/m Features Standard & high response versions Maximum operating pressure 15 bar ISO 172-2-2-2 mounting pattern Internal pilot supply (4 port) Suitable
More informationIMPERIAL TOOLS GD_PG_$KT-K10-$KP-ZOLLWERKZEUG-$ :00:49
IMPERIAL TOOLS 5 IMPERIAL TOOLS 1 2 3 4 page 270-272 5 6 7 8 page 273-282 9 10 11 12 page 282-285 13 14 15 16 17 page 285 i CONVERSION TABLE FROM INCHES TO MILLIMETRES conversion from mm to inch: 69,850
More informationConnecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
More informationSTAR. series. 2-Stage Servovalve Rated flows up to 75 l/m. Features
STAR series 55 2-Stage Servovalve Rated flows up to 75 l/m Features Standard & high response versions Maximum operating pressure 15 bar ISO 172-4-4-2 mounting pattern Internal pilot supply (4 port) Suitable
More informationHaram Captor CR ENGINE SYSTEMS PARTS LIST Nilfisk MODEL /04 revised 10/06 FORM NO BOOK E SECTION
Haram Captor CR 1400 ENGINE SYSTEMS PARTS LIST Nilfisk MODEL 56307000 8/04 revised 10/06 SECTION 15.9.1 04-8 TABLE OF CONTENTS Haram Captor CR 1400 Engine Systems E 15.9.1 1 DESCRIPTION Page Gasoline
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationFULL COLOR TAB #6 TC 105
FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty
More informationSTAR. series. Servo proportional valve Rated flows up to 80 l/m. Features
STAR series 65 Servo proportional valve Rated flows up to 8 l/m Features Maximum operating pressure 15 bar ISO 172-4-4--92 mounting pattern Internal pilot supply (4 port) Suitable for -way or 4-way applications
More informationWide band isolators (Peripheral Mode) 1-3 // // 2-6 // // 2-18 // //4-12// 4-20// 6-21// 8-18
SMA/N/ K Connector options (X) Isolator Port 1 Port 2 Female Male -1 Male Female -2 Female Female -3 Male Male -4 Tolerance Table Metric (inch) (unless otherwise stated): Hole diameter +/- 0.1mm, (+/-
More information3/8-Inch Torque Wrench Square Drive, Torque Range Of 30 to 250 Inch Pound (3.39 to NM)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 57005 3/8" Torque Wrench Square Drive Klein Tools Catalog Number 57005 Manufacturer Klein Tools 3/8-Inch Torque Wrench
More informationACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /
Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible
More informationquality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
More informationTOOL WITH MAGNET Part No. AT135M. Long pickup tool with magnet and gripper. The magnet can be moved up if only the claw is required.
72 TOOTH Flexible RATCHETS 5 0 between each click Extra teeth are engaged simultaneously allowing greater force Improved reverse mechanism Fully sealed ratchet head 1/4 DRIVE Part No. 1400-72SN $45 3/8
More informationTOLL FREE
A Division of TFP Corporation Est. 1928 CD STUD WELDING EQUIPMENT AND ACCESSORIES CATALOG 1 800 727 7883 TOLL FREE www.weldstud.com Sales@weldstud.com 2821 Cole Court Norcross Georgia 30071 (678) 728 0095
More informationHOSE, TUBE & CONNECTION FITTINGS CATALOGUE. JSG Industrial Systems quality industry solutions. Fire Suppression Systems. Flow Measurement Systems
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE JSG Industrial quality industry solutions Lubrication Management Material Dispensing Management Hose & Cable Management Diesel & Fluid Management Fire Suppression
More information.09 3.1.0 1.1 1.44 1.71 1.73 1 5 1-70-3.70 1 HOSE ADAPTORS 0.58 0.1 0.70 0.73 0.83 0.85 0.95 0.93 1.03 1.41 1.1 1.71 1.98.0..3.0 3.08 1.3 1.54 0.89 0.91 1.07 1.4 1.7 1.9 1.17.31.30 0.9 0.37 0.7 0.89 1.18
More informationMetric Impact Sockets
INGERSO-RND IMPC SOCKES Metric Impact Sockets Sockets Features Genuine Ingersoll Rand Impact sockets are built of top quality materials for performance and durability. Specifically designed for use with
More informationBA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends
BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends 3-Piece, Full-Port, Bronze Ball Valve Extended-Tube Ends Ideal for use in medical gas systems, pharmaceutical
More informationDirectional Valves. Pilot Operated Directional Valves. Vickers. Service Data
Service Data Vickers Directional Valves Pilot Operated Directional Valves Eaton Hydraulics, Incorporated 14615 Lone Oak Road Eden Prairie, Minnesota 55344-2287 U.S.A. 5007.04/EN/0799/S DG5V - 8 - S/H -
More information