PARTS MANUAL CRARY WIND SYSTEM NEW HOLLAND

Size: px

Start display at page:

Download "PARTS MANUAL CRARY WIND SYSTEM NEW HOLLAND"

Dayna Melton
5 years ago
Views:

1 PARTS MANUAL CRARY WIND SYSTEM NEW HOLLAND 90-9 C/C 0 CASE IH Manual P/N Rev. 00 Companion to P/N SN Range: C08-D0000

HOW TO REACH US ADDRESS HOURS TELEPHONE FAX NUMBER E-MAIL INTERNET Crary Industries, Inc. th St. NW West Fargo, ND 808 Monday-Friday 8 am-pm (CST) Parts and Service Ph: 0.8.0 800.. Fax: 0.8.9 Email: service@crary.

2 HOW TO REACH US ADDRESS HOURS TELEPHONE FAX NUMBER INTERNET Crary Industries, Inc. th St. NW West Fargo, ND 808 Monday-Friday 8 am-pm (CST) Parts and Service Ph: Fax: service@crary.com sales@crary.com Online: PLEASE SEND US YOUR WARRANTY CARD Please take time to fi ll in the information requested on the card. When you send in the completed card to us, we register your Crary Wind System and start coverage under our limited warranty. Two serial number stickers are included with each CWS. The decals are located on the CWS manifold. One sticker is to be placed on the warranty registration card and mailed back to Crary Industries. The second sticker is to be placed in the owners manual for future reference.

3 PARTS ORDERING INFORMATION For service assistance or parts, contact your nearest authorized Crary dealer. Your nearest authorized Crary dealer will need to know the serial number of your Crary Wind System to provide the most efficient service. See below for information on how to identify and record the serial number for your Crary Wind System. ILLUSTRATION AND TEXT The arrangement of this parts catalog is for easy identifi cation of the CWS parts. All parts are illustrated in either assembled or exploded views. All illustrations are located on the left hand page with the associated parts information on the right. Except for some common hardware, all parts are identifi ed with an item number which corresponds to the Item column on the parts information page. The text pages list the reference number, part number, part description and the quantity required. REPLACEMENT PARTS Only genuine Crary replacement parts should be used to repair the CWS. Crary replacement parts are available from your Crary Dealer. To obtain prompt, effi cient service, remember to give the dealer the correct part description and serial number of the CWS. When ordering parts for your unit provide the following:. The SERIAL NUMBER of your CWS.. The PART NUMBER of the part.. The PART DESCRIPTION.. The QUANTITY needed. WARNING We urge using only genuine replacement parts, which meet all the latest requirements. Replacement parts manufactured by others could present safety hazards, even though they may fi t on this unit. SERIAL NUMBER LOCATION Always give your authorized Crary dealer the serial number of your CWS when ordering parts, requesting service, or any other information. Please record the serial number in the space provided below and on the warranty and registration card. Serial Number MANUFACTURED BY CRARY INDUSTRIES WEST FARGO, NORTH DAKOTA 808 U.S.A. SERIAL NUMBER XXXXXX MANUFACTURED IN U.S.A. Figure, Serial # decal PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page iii

4 SECTION CONTENTS PAGE AIR MANIFOLD... DRIVELINE/C FLANGE ASSEMBLY... 8 DROP TUBE KIT... 8 FAN HOSE ASSEMBLY... GEARBOX/FAN... GEARBOX MOUNT/DRIVE KIT... GEARBOX REPLACEMENT PARTS... REEL ARM MOUNT KIT... 8 RIGHT HAND DRIVE KIT... 8 SWITCH/MOUNT PLATE ASSEMBLY... 9 OPTIONS... KIT, GEARBOX/FAN EXTENSION... KIT, NEUTRAL DRIVE SHAFT... STATIC PRESSURE GAGE... PARTS INDEX...

5 Parts Catalog Crary Wind System New Holland Headers 90-9, C, C, 0 Case IH Headers 00, 00 PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

6 GEARBOX MOUNT/DRIVE KIT NH HEADERS (S/N 0-CURRENT) 0 HEADERS (S/N 0-090) 0/ GEARBOX MOUNT DRIVE KIT ( ) ITEM PART NUMBER DESCRIPTION QTY BUSHING, SD -/8 (INCLUDES ITEM BELOW) 8 BOLT, / X -/ GR HEX CPS ZP (NOT SHOWN) BOLT, / X -/ SERR FLG 09 NUT, / CENTERLOCK ZP 0 WASHER, / FLAT ZP 8 8 BOLT, / X -/ GR HEX CPS ZP 98 KEY, / X -/ SQUARE 9 SHIELD WELDMENT 8 0- SPACER SUPPORT, MOUNT PLATE 0 ADAPTER, -0MORING/-8MJIC DEG (NOT SHOWN) Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

7 0/ NH HEADERS (S/N 090-CURRENT) GEARBOX MOUNT/DRIVE KIT GEARBOX MOUNT KIT ( 980) ITEM PART NUMBER DESCRIPTION QTY 980- BRACKET, GEARBOX MT. (NH 90 S) BOLT, / X -/ SERR FLG HINGE, SHIELD 98- WELDMENT, GBOX DRIVE RH SHIELD 98- WELDMENT, GBOX DRIVE LH SHIELD 90 BOLT, / NC X -/ GR HCS ZP NUT, / NE NYLOCK ZP 8 0 BOLT, / X GR HEX CPSCREW ZP LATCH, FLEXIBLE DRAW 0 SCW, MCH 0- X / PAN HD, PH ZP BOLT, 0- X / HHCS GR8 PLAIN 9 NUT, 0/ NYLOCK TYPE NM, ZP 8 0 WASHER, / FLAT ZP 8 09 NUT, / CENTERLOCK GRB ZP 0 ADAPTER, -0MORING/-8MJIC DEG (NOT SHOWN) PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

8 GEARBOX MOUNT/DRIVE KIT NH C/C & CIH 00 0 HEADERS (S/N 0-CURRENT) - HEADERS (S/N 0-090) 0/ GEARBOX MOUNT DRIVE KIT ( 8) ITEM PART NUMBER DESCRIPTION QTY BUSHING, SD -/8 (INCLUDES ITEM BELOW) 8 BOLT, / X -/ GR HEX CPS ZP (NOT SHOWN) BOLT, / X -/ SERR FLG 0 09 NUT, / CENTER LOCKNUT ZP 0 WASHER, / FLAT ZP 0 BOLT, / X G HCS - ZP 8 BOLT, / X -/ GR HEX CPS ZP 98 KEY, / X -/ SQUARE 8 9 SHIELD WELDMENT 9 0- SPACER SUPPORT, MOUNT PLATE 0 ADAPTER, -0MORING/-8MJIC DEG (NOT SHOWN) Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

9 0/ NH C/C & CIH 00 - HEADERS (S/N 090-CURRENT) GEARBOX MOUNT/DRIVE KIT GEARBOX MOUNT KIT ( 989) ITEM PART NUMBER DESCRIPTION QTY BOLT, / X -/ SERR FLG 988- BRACKET, GBOX MT. (NH -C/CIH00) 98- HINGE, SHIELD 98- WELDMENT, GBOX DRIVE RH SHIELD 98- WELDMENT, GBOX DRIVE LH SHIELD 90 BOLT, /NC X -/ GR HCS ZP NUT, / NE NYLOCK ZP 8 0 BOLT, / X GR HEX CPSCREW ZP LATCH, FLEXIBLE DRAW 0 SCW, MCH 0- X / HHCS GR8 PLAIN BOLT, 0- X / HHCS GR8 PLAIN 9 NUT, 0/ NYLOCK TYPE NM, ZP NUT, /- UNC NYLOCK 998- PLATE, GEARBOX MOUNT 0 WASHER, / FLAT ZP 998- TEMPLATE, 00/C GBOX DRILL (NOT SHOWN) 0 ADAPTER, -0MORING/-8MJIC DEG (NOT SHOWN) PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

10 GEARBOX MOUNT/DRIVE KIT NH 0 & CIH 00 0/ * * * 8 * " HEX BOLTS MAY BE USED IN PLACE OF X -/" FLANGE BOLTS. KIT, GEARBOX MOUNT - CIH 00/NH 0 ( 0) ITEM PART NUMBER DESCRIPTION QTY NUT, /- UNC NYLOCK BUSHING, SD -/8" 0 WASHER, / FLAT ZP BOLT, / X HEX HD GR ZP 98 KEY, / SQUARE X -/ LONG BOLT, / X -/ SERR FLANGE 08- BRACKET, GEARBOX MOUNT 8 (SEE DRIVELINE OPTIONS, PAGES 8-) Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

11 0/ NH 0 & CIH 00 DOUBLE DRIVE HEADERS GEARBOX MOUNT/DRIVE KIT * * * * " HEX BOLTS MAY BE USED IN PLACE OF X -/" FLANGE BOLTS. KIT, GEARBOX MOUNT - CIH00/NH0 DBL DRIVE ( ) ITEM PART NUMBER DESCRIPTION QTY NUT, /- UNC NYLOCK 8 0 WASHER, / FLAT ZP BOLT, / X HEX GR ZP BOLT, / X -/ SERR FLANGE 8- BRACKET, GEARBOX MOUNT 9- PLATE, GEARBOX MOUNT 00- BRACKET, CHAIN TENSIONER PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

12 RIGHT HAND DRIVE KIT NH 90-9, C/C & CIH 00 8 & 0 SINGLE DRIVE HEADERS 0/ Page 8 New Holland/Case IH Crary Wind System Parts Catalog PN R00

13 0/ NH 90-9, C/C & CIH 00 8 & 0 SINGLE DRIVE HEADERS RIGHT HAND DRIVE KIT RH DRIVE KIT 8 /0 NH/CIH00 SINGLE ( 88) ITEM PART NUMBER DESCRIPTION QTY 00 BOLT, / X / GR HEX HD ZP 0 SCREW, /8- X LG THD CUTT ZP 0 WASHER, / FLAT ZP 9- WELDMENT, PTO HOLDER BOLT, / X -/ SERR FLG SPACER,.8 X. X.0 STL 0- SLIP CLUTCH SHIELD 09 SHIELD MOUNT PLATE ASSEMBLY (INCLUDES ITEMS 8-9) 8 0 NUT, /-8 TINNERMAN U-TYPE PLATE, SHIELD MOUNT SHAFT, DRIVE (SEE DRIVELINE OPTIONS, PAGES 8-) PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page 9

14 RIGHT HAND DRIVE KIT NH 90-9, C/C & CIH 00 SINGLE DRIVE HEADERS 0/ ASSEMBLY, RH DRIVE KIT FT. SINGLE ( 88) ITEM PART NUMBER DESCRIPTION QTY BUSHING, SD -/8" 0 BOLT, / X HEX HD GR ZP 0 SCREW, /8- X LG THD CUTT ZP 98 KEY, / SQUARE X -/ LONG 9- BRACKET, DRIVELINE SUPPORT SHAFT, DRIVE WELDMENT, GEARBOX SHIELD Page 0 New Holland/Case IH Crary Wind System Parts Catalog PN R00

15 0/ NH 90-9, C/C & CIH DOUBLE DRIVE HEADERS RIGHT HAND DRIVE KIT Use OEM Mounting Hardware OEM Drive Shaft RH DRIVE KIT ( 08) ITEM PART NUMBER DESCRIPTION QTY 00 BOLT, / X / GR HEX CAPSCREW ZP 0 WASHER, / FLAT ZP 0- SLIP CLUTCH SHIELD 09 SHIELD MOUNT PLATE ASSEMBLY (INCLUDES ITEMS -) 0 NUT, / -8 TINNERMAN U-TYPE 08- PLATE, SHIELD MOUNT - PLATE, BEARING MOUNT (SEE DRIVELINE OPTIONS, PAGES 8-) PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

16 RIGHT HAND DRIVE KIT NH 90-9, C/C & CIH 00 - HEADERS 0/ OEM DRIVELINE 8 9 Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

17 0/ NH 90-9, C/C & CIH 00 - HEADERS RIGHT HAND DRIVE KIT ITEM PART NUMBER RH DRIVE KIT DESCRIPTION SPLINE PTO SHAFT ( 98) HEX PTO SHAFT ( 0) -00 ASSEMBLY, SHIELD MOUNT (INCLUDES ITEMS -) - PLATE, SHIELD MOUNT 0 NUT, / -8 TINNERMAN U-TYPE (SEE DRIVELINE OPTIONS, PAGES 8-) SHIELD, DRIVE SHAFT (8 ) 00 FLANGETTE, MS RND BIT, ZP 09 BEARING, -/8 INSERT SA0FP 0 WASHER, /8 SAE FLAT ZP 8 0 WASHER, / FLAT ZP 9 88 NUT, /8 NE NYLOCK ZP 0 09 WASHER, / SAE FLAT ZP BOLT, CARR /8 X GR HEX HD ZP 0 BOLT, / X -/ HEX HD GR ZP 00 BOLT, / X / GR HEX HD ZP NUT, /- UNC NYLOCK SHAFT, SICKLE DRIVE (NH) 9- SHIELD, SLIP CLUTCH 989- BRACKET, BEARING MOUNT (USED ON PRE 0 HEADER MODELS) 99- BRACKET, BEARING MOUNT (USED ON 0 & LATER HEADER MODELS) 8 BUSHING, SD -/8 (INCLUDES ITEM BELOW) 8 BOLT, / X -/ GR HEX CPS ZP 9 98 KEY, / X -/ SQUARE SHAFT, -/8 SPLINE STUB 0-00 SHAFT, -/8 SPLINE TO HEX PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

18 RIGHT HAND DRIVE KIT NH 0 & CIH HEADERS 0/ KIT, RH DRIVE 0 / - CIH 00/NH 0 ( ) ITEM PART NUMBER DESCRIPTION QTY LATCH, FLEXIBLE DRAW 0 BOLT, / X HEX HD GR ZP 0 SCREW, /8- X THD CUTT ZP NUT, / NE NYLOCK ZP 90 BOLT, / X -/ GR HCS NC ZP 9 NUT, 0/ NYLOCK TYPE NM, ZP SCREW, MCH. 0- X / PAN HD PH ZP 8 BOLT, 0- X /" HHCS GR8 PLAIN 9 9- BRACKET, DRIVELINE SUPPORT HINGE, SHIELD 98- WELDMENT, GBOX DRIVE LH SHIELD SHAFT, DRIVE WELDMENT, GEARBOX SHIELD (SEE DRIVELINE OPTIONS, PAGES 8 - ) Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

19 0/ NH 0 & CIH HEADERS RIGHT HAND DRIVE KIT ITEM PART NUMBER KIT, RH DRIVE CIH 00/NH 0 DESCRIPTION 0 FT. QTY 0 BOLT, /8 X CRG GR NC ZP 0 SCREW, /8- X THD CUTT ZP BOLT, / X / SERR FLANGE GR ZP 88 NUT, /8 NE NYLOCK ZP BOLT, / X SERR FLANGE BOLT, / X -/ SERR FLANGE 09 BEARING, -/8" INSERT SA0FP 8 00 FLANGETTE, MS RND BIT, ZP 9 0- SLIP CLUTCH SHIELD 0 09 SHIELD MOUNT PLATE ASSY. 9- BRACKET, DRIVELINE SUPPORT SHIELD, DRIVE SHAFT (.") SHIELD, DRIVE SHAFT (0") WELDMENT, GEARBOX SHIELD 08- BRACKET, BEARING MOUNT SHAFT, GEARBOX DRIVE (0FT) SHAFT, GEARBOX DRIVE (FT) - WELDMENT, SHIELD (SEE DRIVELINE OPTIONS, PAGES 8 - ) FT. 8 QTY PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

20 RIGHT HAND DRIVE KIT NH 0 & CIH 00 DOUBLE DRIVE HEADERS 0/ Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

21 0/ NH 0 & CIH 00 DOUBLE DRIVE HEADERS RIGHT HAND DRIVE KIT ITEM PART NUMBER KIT, RH DRIVE - CIH00/NH0 DOUBLE DRIVE DESCRIPTION FT. QTY NUT, /- UNC NYLOCK NUT, /8- UNC NYLOCK BOLT, /8 X -/ HEX GR ZP SPACER,.00 X. X.00 STL SPROCKET, RC 0 IDLER T. BORE ELBOW, RUBBER-8" X DEG. BUSHING, SD -/8" 8 00 BOLT, /8 X HEX GR ZP 9 9 WASHER, /8 SAE FLAT ZP 0 NUT, / NE NYLOCK ZP WASHER, / SAE FLAT ZP 98 KEY, / SQUARE X -/ LONG BOLT, / X -/ SERR FLANGE U-BOLT, /-8 X 8.9 X.9 09 CLAMP, 8-/" T-BOLT HOSE, 8" SINGLE HUMP BAND, ELBOW SUPPORT SHAFT, DRIVE WELDMENT, GEARBOX SHIELD 0 9- MANIFOLD, " ALUMINUM 8- MANIFOLD, 0"ALUMINUM 9- WELDMENT, TUBE CLAMP 0- WELDMENT, DRIVELINE/CHAIN SHIELD 08- WELDMENT, DRIVELINE STORAGE BRACKET 0-00 ASSEMBLY, SPROCKET/C-FLANGE - -/8" SPL CHAIN, #0 P ROLLER (NOT SHOWN) 0 FT. QTY PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

22 DRIVELINE/C FLANGE ASSEMBLY ALL MODELS 0/ F 9 0 M 8 E I K L B D A G H J 8 C B COMBINE PTO TYPE SPLINE HEADER TYPE HEADER LENGTH HEADER DRIVE DRIVELINE KIT NUMBER ' - 0' SINGLE X NH ' - ' DOUBLE X ' DOUBLE X NH C/C & CIH 00 0' - ' ALL X NH 0 & CIH 00 ( COM- BINES) 0 ALL X NH 0 & CIH 00 ( COM- BINES) 0 - DOUBLE X Page 8 New Holland/Case IH Crary Wind System Parts Catalog PN R00

23 0/ ALL MODELS DRIVELINE/C FLANGE ASSEMBLY ITEM PART NUMBER DRIVELINES DESCRIPTION -00 QTY -00 QTY 9-00 COUNTER FLANGE, -/8" SPLINE W/QD DRIVELINE/CLUTCH, -/8" SPLINE(S) (SEE TABLE BELOW) DRIVELINE/CLUTCH, -/8" SPLINE(L) (SEE TABLE BELOW) 9 BOLT, / X HEX HD GR ZP 8 BOLT /* / GR HEX CPS ZP NUT, / NE NYLOCK ZP 89- SPROCKET, GEARBOX DRIVE (NOT SHOWN) -00 QTY ITEM PART NUMBER ASSEMBLY, DRIVELINE/CLUTCH DESCRIPTION QTY QTY KIT, CROSS & BEARING W SAFETY CHAIN YOKE, INBOARD B 8 8 YOKE, INBOARD A 9 0 CONE, RIB SAFETY 0 RING, SC BEARING -00 YOKE, FLANGE -00 CLUTCH, FRICTION (INCLUDES ITEMS A-M) A 0-00 SPRING, BELVILLE (W/SHIELD) B 0-00 SET, FRICTION DISC C 0-00 YOKE, FLANGE D -00 PLATE, THRUST E -00 HUB, CLUTCH F NUT, M0 X. HEX NYLOCK TYPE NE G -00 BOLT, M0 X. X 0 CLASS 8.8 HC H 8-00 BACKUP RING I 9-00 BALL, CLUTCH L 0-00 SPRING, COMPRESSION K -00 COLLAR, LOCK L -00 RING, BACKUP M -00 RING, SNAP 8-00 PROFILE, INNER B (SHORT) -00 PROFILE, INNER B (LONG) 9-00 PROFILE, OUTER A (SHORT) -00 PROFILE, OUTER A (LONG) 0-00 TUBE, INNER SHIELD (SHORT) -00 TUBE, INNER SHIELD (LONG) -00 TUBE, OUTER SHIELD (SHORT) -00 TUBE, OUTER SHIELD (LONG) PIN, M0 X 80 SPRING 8 0 DECAL, OUT 9 DECAL, IN PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page 9

24 DRIVELINE/C FLANGE ASSEMBLY ALL MODELS 0/ F 9 0 G 8 E I K M H J L B D A 8 C B COMBINE PTO TYPE HEX CIH 00 SPLINE HEADER TYPE HEADER LENGTH HEADER DRIVE DRIVELINE KIT NUMBER ' - ' ALL X 0' - ' ALL X NH C/C & CIH 00 0' - ' ALL X NH 0 & CIH 00 ( COMBINES) 0' - ' ALL X CIH 00 (PRE 000 COMBINES) 0 - ALL X 0' - ' ALL X Page 0 New Holland/Case IH Crary Wind System Parts Catalog PN R00

25 0/ ALL MODELS DRIVELINE/C FLANGE ASSEMBLY ITEM PART NUMBER DRIVELINES DESCRIPTION QTY 9-00 COUNTER FLANGE, -/8" HEX DRIVELINE/CLUTCH, -/8" SPLINE(L) (SEE TABLE BELOW) QTY DRIVELINE/CLUTCH, -/8" SPLINE(XL) (SEE TABLE BELOW) -00 DRIVELINE/CLUTCH, -/8 SPL (SEE TABLE BELOW) 9 BOLT, / X HEX HD GR ZP NUT, / NE NYLOCK ZP ITEM PART NUMBER ASSEMBLY, DRIVELINE/CLUTCH DESCRIPTION QTY QTY KIT, CROSS & BEARING W SAFETY CHAIN YOKE, INBOARD B YOKE, INBOARD S 8 8 YOKE, INBOARD A YOKE INBOARD S 9 0 CONE, RIB SAFETY 0 RING, SC BEARING 8 QTY -00 QTY -00 YOKE, FLANGE -00 CLUTCH, CW OVERRUNNING -00 CLUTCH, FRICTION (INCLUDES ITEMS A-M) A 0-00 SPRING, BELVILLE (W/SHIELD) B 0-00 SET, FRICTION DISC C 0-00 YOKE, FLANGE D -00 PLATE, THRUST E -00 HUB, CLUTCH F NUT, M0 X. HEX NYLOCK TYPE NE G -00 BOLT, M0 X. X 0 CLASS 8.8 HC H 8-00 BACKUP RING I 9-00 BALL, CLUTCH L 0-00 SPRING, COMPRESSION K -00 COLLAR, LOCK L -00 RING, BACKUP M -00 RING, SNAP -00 PROFILE, INNER B (LONG) PROFILE, INNER SLGA -00 PROFILE, OUTER A (LONG) PROFILE, OUTER SL -00 TUBE, INNER SHIELD (LONG) TUBE, INNER SHIELD ROUND -00 TUBE, OUTER SHIELD (LONG) TUBE, OUTER SHIELD OVAL PIN, M0 X 80 SPRING 8 0 DECAL, OUT 9 DECAL, IN PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

26 GEARBOX/FAN KIT #: S/N KIT #8: S/N / Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

27 0/ KIT #: S/N KIT #8: S/N GEARBOX/FAN GEARBOX GEAR RATIO APPLICABLE MODELS 8.: ALL NEW HOLLAND COMBINES; CASE IH SERIES 9.: PRE 000 CASE IH COMBINES ITEM PART NUMBER GEARBOX/FAN DESCRIPTION 8.: ( 8) GEAR RATIO 9.: ( 0) GEARBOX, FAR 8.: (SEE PAGES -) GEARBOX, FAR 9.: (SEE PAGES -) HUB/MOTOR MOUNT PLATE (8 IN. -B PILOT) 0 BOLT, / X -/ HEX HD 09 NUT, / CENTERLOCK GRB ZP 9 8 FAN RH SIDE W/ BUTTERFLY 0 BOLT, /8 X THREAD CUT WASHER, /8 SAE FLAT FAN ROTOR,.8 X CW /8 STL WASHER, / SAE FLAT 0 0 NUT, SPINDLE CASTLE 08 PIN, / X -/ COTTER 9 8 FAN LH SIDE W/ BUTTERFLY BOLT, /8 NC X -/ HEX HD 0 NUT, /8 SERR FLANGE BASE WELDMENT, BASE STRAP 9 BEARING, /8 -BOLT FLNG. 8 8 BOLT, / X / CRG 9 WELDMENT, SCREEN/BLADE 0 9 WASHER, /8 SAE FLAT WELDMENT, PIVOT 8 WELDMENT, SCREEN CLEANER WELDMENT, SCREEN CAP 0 NUT, / SERR FLANGE BOLT, / X / HEX HD 09 SCREW, NO. X / TAPPING HWH ZP 0 KEYSTOCK, / 8 - WELDMENT, ACTUATOR MOUNT 9 - WELDMENT, VALVE ACTUATOR 0 8- WELDMENT, INDICATOR PLATE, LARGE BUTTERFLY BOLT, #0- X IN. GR8 HCPS PLAIN 9 NUT, #0 X NYLOCK 0-00 ACTUATOR, STROKE WARNER BOLT, / X -/ HCS G ZP 08 NUT, / CENTERLOCK 9- WRAP, ROTARY SCREEN PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

28 GEARBOX/FAN KIT #: S/N 090-CURRENT KIT #8: S/N 0988-CURRENT 0/ Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

29 0/ KIT #: S/N 090-CURRENT KIT #8: S/N 0988-CURRENT GEARBOX/FAN ITEM GEARBOX GEAR RATIO APPLICABLE MODELS 8.: ALL NEW HOLLAND COMBINES; CASE IH SERIES 9.: PRE 000 CASE IH COMBINES PART NUMBER GEARBOX/FAN DESCRIPTION 8.: ( 8) GEAR RATIO 9.: ( 0) GEARBOX, FAR 8.: (SEE PAGES -) GEARBOX, 9.: (SEE PAGES -) PLATE,HUB/MOTOR MT.(8"B-PILOT) 0 BOLT, / X -/ HEX HD GR ZP 09 NUT, /" CENTERLOCK GRB ZP 9 8"FAN RH SIDE W/BUTTERFLY 0 SCREW,/8-*"LG THD CUTT ZP WASHER,/8"SAE FLAT,ZP,PC/LB FAN ROTOR,.8" X " CW,/8,STL WASHER,/"SAE FLAT ZP,PC/LB 0 9 8"FAN LH SIDE W/BUTTERFLY BOLT, /8 X -/" HEX HD GR ZP 0 NUT, /8" SERRATED FLANGE NC ZP BASE,8"ROTARY SCREEN 0 KEY, / SQ X -/" PLAIN - WELDMENT, ACTUATOR MOUNT 0-00 ACTUATOR, " STROKE ELECTRIC BOLT / X -/ HHCS GR ZP 8 08 NUT, / CENTERLOCK NC ZP WELDMENT,8"ROTARY SCRN.BASE STRAP 0 0 NUT, /" NF CASTLE ZP 08 PIN /* / COTTER PIN ZP BEARING, /" ROUND INSERT FLANGETTE, MM HOLE 999- WELDMENT, PIVOT SCREEN/BLADE WELDMENT (RH) BOLT, /X/ GR NC ZP CRG NUT, / SERR FLNG NC ZP 8 0 NUT, /"-0 SERRATED FLNG NC ZP 9 00 BOLT, /*/ GR HEX HD ZP WELDMENT, 8" FAN SCREEN CLEANER SCREEN CAP WELDMENT 9- WRAP, ROTARY SCREEN BOLT,0- * " GR8 HCPS PLAIN 9 NUT, 0/ NYLOCK TYPE NM, ZP 09 SCREW # * / TAPPING HWH ZP - WELDMENT, VALVE ACTUATOR (8"RH) -00 WELDMENT, BUTTERFLY SHAFT (8") 8 0- WELDMENT, INDICATOR (8") PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

30 GEARBOX REPLACEMENT PARTS ALL MODELS 0/ ITEM PART NUMBER GEARBOX (REPLACEMENT PARTS) DESCRIPTION GEAR RATIO 8.: ( ) 80 GEAR, SP BEV LH 9T NPN GEAR, SP BEV RH 9T -00 NUT, LOCK /" NF NPN SHIM,.00 RED NPN SHIM,.00 BLUE NPN SPEC. HOUSING, SUB-ASSEMBLY NPN SPEC. HOUSING, PINION 9.: ( ) Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

31 0/ ALL MODELS GEARBOX REPLACEMENT PARTS ITEM PART NUMBER GEARBOX (REPLACEMENT PARTS) DESCRIPTION GEAR RATIO 8.: ( ) 9.: ( ) 8 NPN SPEC. CAP, OPEN 9 NPN SPEC. CAP, CLOSED 0 8 SPEC. SLEEVE, INPUT 80 SPEC. SHAFT, OUTPUT PINION NPN SPEC. GEAR INTG HEL LH T NPN SPEC. GEAR INTG HEL LH T NPN SPEC. GEAR, HEL RH 8T NPN SPEC. GEAR, HEL RH 8T NPN SPEC. SPACER NPN SPEC. SHIM,.00 RED NPN SPEC. SHIM,.00 BLUE NPN SPEC. SHIM,.00 RED 8 NPN SPEC. SHIM,.00 BLUE 9 8 BEARING, BALL 0NPP OR EQUIVALENT BEARING,.8 X. CUP 8 BEARING, CUP 0 OR EQUIVALENT BEARING,.0 X.0 CONE 89 BEARING, CONE 8 OR EQUIVALENT NPN SCREW, /8" X " NC HHCS GR NPN SCREW, /" X " NC HHCS GR 0 0 NPN SCREW, /8" X -/" NC HHCS GR 8 8 NPN WASHER, /" X -/" X /8" 8 NPN WASHER, -/" X -/" X /8" 9 NPN NUT, /8" NC HEX NPN KEY, /" SQUARE X /" P&W NPN KEY, /" SQUARE X -/" SQUARE END NPN KEY, /" X " WOODRUFF 8 RING, RETAINING RING, BEVELED RETAINING N00- NPN OIL, MOBILUBE SHC W NPN PLATE, NAME, CRARY NPN PAINT, FLAT BLACK PLUG, PIPE SOCKET / NPT 9-00 PLUG, PIPE /" O-RING BOSS 0-00 BREATHER, /8 NPT SEAL, 8 OR EQUIVALENT SEAL, 9 OR EQUIVALENT -00 O-RING, -0 NPN O-RING, -8 NPN O-RING, -8 NPN SCREW, /" X /" NC HHCS GR NPN TAG, LUBRICATION GEARBOX SEAL AND SHIM KIT (INCLUDES ITEMS,,,,, 8,,,, & ) 99 GEARBOX, REBUILT (/8.:) (NOT SHOWN) 0 GEARBOX, REBUILT (/9.:) (NOT SHOWN) GEARBOX GEAR KIT (8.:) (INCLUDES ITEMS,, & ) GEARBOX GEAR KIT (9.:) (INCLUDES ITEMS,, & ) PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

32 REEL ARM MOUNT KIT NH / A OEM NUTS OEM BOLTS REEL ARM MOUNT KIT, LH PARTS ( 999) ITEM PART NUMBER DESCRIPTION QTY 0 BOLT, / X HEX HD GR ZP 09 NUT, /" CENTERLOCK GRB ZP 0 BOLT, /8 X CRG GR ZP 08 BOLT, / X HEX HD GR ZP 09 WASHER, / SAE FLAT ZP 88 NUT, /8 NE NYLOCK ZP 89 ASSY', BRACE CLAMP 8 8- STRAP, ADJUSTMENT - S 9 8- TUBE, ARM MOUNT (CIH, GLEANER) ASSY', LH-JD, RH-CIH/GL REEL MOUNT (CWS) A 809 GUIDE, SADDLE ASSY', HALF CLAMP A 809 GUIDE, SADDLE 0- CLAMP, HALF 0- BRACKET, LH REEL ARM (NH9) Page 8 New Holland/Case IH Crary Wind System Parts Catalog PN R00

33 0/ NH 90-9 REEL ARM MOUNT KIT A OEM NUTS OEM BOLTS REEL ARM MOUNT KIT, RH PARTS ( 999) ITEM PART NUMBER DESCRIPTION QTY 0 BOLT, / X HEX HD GR ZP 09 NUT, /" CENTERLOCK GRB ZP 0 BOLT, /8 X CRG GR ZP 08 BOLT, / X HEX HD GR ZP 09 BOLT, / X -/ HEX HD GR ZP 09 WASHER, / SAE FLAT ZP 88 NUT, /8 NE NYLOCK ZP 8 8 ELECTRIC ACTUATOR 9 9 ASSY', PIVOT CLAMP 0 89 ASSY', BRACE CLAMP 8- STRAP, ADJUSTMENT - S 8- TUBE, ARM MOUNT (CIH, GLEANER) ASSY', RH REEL MOUNT - JD (CWS) A 809 GUIDE, SADDLE ASSY', HALF CLAMP A 809 GUIDE, SADDLE 0- CLAMP, HALF 0- BRACKET, RH REEL ARM (NH9) 0 HARNESS, ACTUATOR SWITCH ADAPTER (NOT SHOWN) PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page 9

34 REEL ARM MOUNT KIT NH C/C & CIH 00 0/ 0 A 9 OEM BOLT 8 OEM NUT REEL ARM MOUNT KIT, LH PARTS ( 09) ITEM PART NUMBER DESCRIPTION QTY NUT, /- UNC NYLOCK BOLT, / X CRG GR ZP 0 BOLT, /8 X CRG GR ZP 08 BOLT, / X HEX HD GR ZP 09 WASHER, / SAE FLAT ZP 88 NUT, /8 NE NYLOCK ZP 89 ASSY', BRACE CLAMP 8 8- TUBE, ARM MOUNT (CIH, GLEANER) ASSY', LH-JD, RH-CIH/GL REEL MOUNT (CWS) A 809 GUIDE, SADDLE ASSY', HALF CLAMP A 809 GUIDE, SADDLE 0- CLAMP, HALF 0- WELDMENT, REEL ARM MOUNT 0- STRAP, ADJUSTMENT - L 99- WELDMENT, REEL ARM MOUNT Page 0 New Holland/Case IH Crary Wind System Parts Catalog PN R00

35 0/ NH C/C & CIH 00 REEL ARM MOUNT KIT 0 A 9 OEM NUT 8 OEM BOLT REEL ARM MOUNT KIT, RH PARTS ( 09) ITEM PART NUMBER DESCRIPTION QTY NUT, /- UNC NYLOCK BOLT, / X CRG GR ZP 0 BOLT, /8 X CRG GR ZP 08 BOLT, / X HEX HD GR ZP 09 BOLT, / X -/ HEX HD GR ZP 09 WASHER, / SAE FLAT ZP 88 NUT, /8 NE NYLOCK ZP 8 8 ELECTRIC ACTUATOR 9 9 ASSY', PIVOT CLAMP 0 89 ASSY', BRACE CLAMP 8- TUBE, ARM MOUNT (CIH, GLEANER) ASSY', RH REEL MOUNT - JD (CWS) A 809 GUIDE, SADDLE ASSY', HALF CLAMP A 809 GUIDE, SADDLE 0- CLAMP, HALF 0- WELDMENT, REEL ARM MOUNT 0- STRAP, ADJUSTMENT - L 99- WELDMENT, REEL ARM MOUNT 0 HARNESS, ACTUATOR SWITCH ADAPTER (NOT SHOWN) PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

36 REEL ARM MOUNT KIT NH 0 & CIH 00 0/ Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

37 0/ NH 0 & CIH 00 REEL ARM MOUNT KIT KIT, CWS REEL ARM MOUNT - LH ( 9) ITEM PART NUMBER DESCRIPTION QTY NUT, /- UNC NYLOCK 00 BOLT, /8 X HEX HD GR ZP 0 BOLT, / X -/ HEX HD GR ZP 0 WASHER, / FLAT ZP 0 BOLT, /8 X CRG GR NC ZP 0 WASHER, /8 SAE FLAT ZP 88 NUT, /8 NE NYLOCK ZP 0 8 BOLT, /8 X -/ HEX HD GR NC ZP 9 8 BOLT, / X -/ CRG GR NC ZP 0 09 T-BOLT CLAMP 8-/8" 89 ASSEMBLY, BRACE CLAMP 0- CLAMP, HALF ASSY.,LH-JD,RH-CIH/GL REEL MT.(CWS) 0- STRAP, ADJUSTMENT (L) - TUBE, ARM MOUNT - PLATE, SIDE 8-00 ASSEMBLY, REEL MOUNT PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

38 REEL ARM MOUNT KIT NH 0 & CIH 00 0/ Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

39 0/ NH 0 & CIH 00 REEL ARM MOUNT KIT KIT, CWS REEL ARM MOUNT - RH ( 9) ITEM PART NUMBER DESCRIPTION QTY NUT, /- UNC NYLOCK BOLT, / X -/ HEX HD GR ZP BOLT, / X -/ HEX HD GR ZP 00 BOLT, /8 X HEX HD GR ZP 009 BOLT, /8 X HEX HD GR ZP 0 BOLT, / X -/ HEX HD GR ZP 0 WASHER, FLAT / ZP 8 0 WASHER, / FLAT ZP 9 0 BOLT, /8 X CRG GR NC ZP 0 0 WASHER, /8 SAE FLAT ZP NUT, / SERR FLANGE NC ZP 88 NUT, /8 NE NYLOCK ZP BOLT, /8 X -/ HEX HD GR NC ZP 8 BOLT, / X -/ CRG GR NC ZP U-BOLT, /-8 X 8.9 X.9 09 T-BOLT CLAMP 8-/8" 8 ELECTRIC ACTUATOR 8 9 ASSEMBLY, PIVOT CLAMP 9 89 ASSEMBLY, BRACE CLAMP 0 0- CLAMP, HALF 8- MANIFOLD, 0" ALUMINUM ASSY., RH REEL MT.(JD-CWS) 0- STRAP, ADJUSTMENT (L) BOLT, / X -/ HEX HD GR ZP NUT, / CENTERLOCK ZP - TUBE, ARM MOUNT 09- PLATE, SENSOR MOUNT 8 - PLATE, SIDE ASSEMBLY, REEL MOUNT 0 - WELDMENT, TUBE MOUNT 9- WELDMENT, TUBE MOUNT PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

40 FAN HOSE ASSEMBLY NH / FAN HOSE ASSEMBLY (90-9) ITEM PART NUMBER DESCRIPTION QTY ELBOW, RUBBER-8 X DEG. 0 WASHER, /8 FLAT ZP BOLT, /8 X -/ GR HHCS ZP NUT, / SERR FLANG NC ZP 88 NUT, /8 NE NYLOCK ZP WASHER, / SAE FLAT ZP 09 T-BOLT, CLAMP T-BOLT, CLAMP 8-/ 9 MANIFOLD ELBOW, -8 (MR) 0 FLEX HOSE 8 ID X 8FT BAND, ELBOW SUPPORT U-BOLT, / -8 X 8.9 X.9 8- MANIFOLD, 0 ALUMINUM - TUBE MOUNT WELDMENT Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

41 0/ NH C/C & CIH 00 FAN HOSE ASSEMBLY FAN HOSE ASSEMBLY (NH C/C & CIH 00) ITEM PART NUMBER DESCRIPTION QTY ELBOW, RUBBER -8 X DEG. 0 WASHER, /8 SAE FLAT ZP BOLT, /8 X -/ HEX HD GR ZP 88 NUT, /8 NE NYLOCK P NUT, / SERR FLNG NC ZP 08 BOLT, CARR /8 X -/ GR NC ZP 09 T-BOLT, CLAMP 8-/ T-BOLT, CLAMP 8-/ 9 MANIFOLD ELBOW, -8 (MR) 0 FLEX HOSE, 8 ID X 8FT. BAND, ELBOW SUPPORT U-BOLT, /-8 X 8.9 X.9 8- MANIFOLD, 0 ALUMINUM 0- TUBE MOUNT WELDMENT 809 GUIDE, SADDLE 9-00 TUBE MOUNT ASSEMBLY 0- HALF CLAMP PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

42 FAN HOSE ASSEMBLY NH 0 & CIH 00 0/ Page 8 New Holland/Case IH Crary Wind System Parts Catalog PN R00

43 0/ NH 0 & CIH 00 FAN HOSE ASSEMBLY NH 0 &CIH 00 CWS HOSE ASSEMBLY ITEM PART NUMBER DESCRIPTION QTY ELBOW, RUBBER 8" X DEG. 009 BOLT, /8 X GR HEX HD ZP 0 WASHER, FLAT / ZP 88 NUT, /8 NE NYLOCK ZP 09 CLAMP, 8-/8" T-BOLT 09 CLAMP, 8-/" T-BOLT MANIFOLD ELBOW 8" (MR) 8 FLEX HOSE, 8"ID X 8FT. 9 BAND, ELBOW SUPPORT 0 8- MANIFOLD, 0 ALUMINUM BOLT, / X -/ HEX HD GR ZP NUT, / CENTERLOCK ZP 09- PLATE, SENSOR MOUNT - WELDMENT, TUBE MOUNT 9- WELDMENT, TUBE MOUNT HOSE, 8" X ' FLEXABLE PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page 9

44 FAN HOSE ASSEMBLY NH 0 & CIH 00 DOUBLE DRIVE HEADERS 0/ Page 0 New Holland/Case IH Crary Wind System Parts Catalog PN R00

45 0/ NH 0 & CIH 00 DOUBLE DRIVE HEADERS FAN HOSE ASSEMBLY ITEM PART NUMBER HOSE ROUTING DOUBLE DRIVE CIH00/NH0 DESCRIPTION ELBOW, 8" X DEG. RUBBER 00 BOLT, /8 X HEX HD GR ZP 009 BOLT, /8 X HEX GR ZP 0 WASHER, / FLAT ZP NUT, / SERR FLANGE NC ZP NUT, / NE NYLOCK ZP 88 NUT, /8 NE NYLOCK ZP 8 WASHER, / SAE FLAT ZP U-BOLT, /-8 X 8.9 X CLAMP, 8-/8" T-BOLT 09 CLAMP, 8-/" T-BOLT 8 8 ELBOW, 8" X 90 DEG. RUBBER HOSE, 8" X 8FT. FLEX HOSE, 8" SINGLE HUMP BAND, ELBOW SUPPORT 8- MANIFOLD, 0"ALUMINUM BOLT, / X -/ HEX GR ZP NUT, / CENTERLOCK ZP 9 8- MANIFOLD, 0"ALUMINUM 9- MANIFOLD, " ALUMINUM PLATE, SENSOR MOUNT - WELDMENT, TUBE MOUNT 9- WELDMENT, TUBE MOUNT 9- WELDMENT, TUBE CLAMP 0FT. QTY FT. QTY PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

46 AIR MANIFOLD SINGLE MANIFOLDS HEADERS W/ -/ TUBE SPACING 0/ CWS MANIFOLD, -/ SPACING ( 9) ITEM PART NUMBER DESCRIPTION QTY 0-00 DECAL, CWS LOGO MANIFOLD, FOOT CWS (. ) Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

47 THIS PAGE INTENTIONALLY LEFT BLANK PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

48 AIR MANIFOLD SECTIONAL MANIFOLDS 8 - HEADERS 0/ ITEM PART NUMBER 8 - CWS MANIFOLD ASSEMBLY DESCRIPTION 8 MFLD. ( ) QTY 8 MFLD. - / ( ) QTY 0 MFLD. ( ) QTY 0-00 ASSEMBLY, 8 FT. CWS-LH MANIFOLD ( ) (INCLUDES ITEMS -) WELDMENT, 8 FT. CWS-LH MANIFOLD ( ) 0-00 DECAL, CWS LOGO (YELLOW) -00 ASSEMBLY, 8 FT. CWS-LH MANIFOLD (. ) (INCLUDES ITEMS -) WELDMENT, 8 FT. CWS-RH/LH MANIFOLD (. ) 0-00 DECAL, CWS LOGO (YELLOW) 8-00 ASSEMBLY, 0 FT. CWS-LH MANIFOLD ( ) (INCLUDES ITEMS -) WELDMENT, 0 FT. CWS-RH/LH MANIFOLD ( ) 0-00 DECAL, CWS LOGO (YELLOW) 0 MFLD. - / ( ) QTY MFLD. ( ) QTY Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

49 0/ SECTIONAL MANIFOLDS 8 - HEADERS AIR MANIFOLD ITEM PART NUMBER 8 - CWS MANIFOLD ASSEMBLY DESCRIPTION 8 MFLD. ( ) QTY 8 MFLD. - / ( ) QTY 0 MFLD. ( ) QTY 0 MFLD. - / ( ) QTY MFLD. ( ) QTY -00 ASSEMBLY, 0 FT. CWS-LH MANIFOLD (. ) (INCLUDES ITEMS -) WELDMENT, 0 FT. CWS-RH/LH MANIFOLD (. ) 0-00 DECAL, CWS LOGO (YELLOW) 8-00 ASSEMBLY, FT. CWS-LH MANIFOLD ( ) (INCLUDES ITEMS -) WELDMENT, FT. CWS-LH MANIFOLD ( ) 0-00 DECAL, CWS LOGO (YELLOW) -00 ASSEMBLY, 8 FT. CWS-RH MANIFOLD ( ) (INCLUDES ITEMS -) WELDMENT, 8 FT. CWS-RH MANIFOLD ( ) 0-00 DECAL, CWS LOGO (YELLOW) -00 PLATE, CONNECTOR/BAFFLE 88 NUT, /8 NE NYLOCK ZP 8 00 BOLT, /8 X -/ GR HCS ZP 8-00 ASSEMBLY, 8 FT. CWS-RH MANIFOLD (. ) (INCLUDES ITEMS -) WELDMENT, 8 FT. CWS-RH/LH MANIFOLD (. ) 0-00 DECAL, CWS LOGO (YELLOW) -00 PLATE, CONNECTOR/BAFFLE 88 NUT, /8 NE NYLOCK ZP 8 00 BOLT, /8 X -/ GR HCS ZP 8-00 ASSEMBLY, 0 FT. CWS-RH MANIFOLD ( ) (INCLUDES ITEMS -) WELDMENT, 0 FT. CWS-RH MANIFOLD ( ) 0-00 DECAL, CWS LOGO (YELLOW) -00 PLATE, CONNECTOR/BAFFLE 88 NUT, /8 NE NYLOCK ZP 8 00 BOLT, /8 X -/ GR HCS ZP 8-00 ASSEMBLY, 0 FT. CWS-RH MANIFOLD (. ) (INCLUDES ITEMS -) WELDMENT, 0 FT. CWS-RH/LH MANIFOLD (. ) 0-00 DECAL, CWS LOGO (YELLOW) -00 PLATE, CONNECTOR/BAFFLE 88 NUT, /8 NE NYLOCK ZP 8 00 BOLT, /8 X -/ GR HCS ZP 8-00 ASSEMBLY, FT. CWS-RH MANIFOLD ( ) (INCLUDES ITEMS -) WELDMENT, FT. CWS-RH MANIFOLD ( ) 0-00 DECAL, CWS LOGO (YELLOW) -00 PLATE, CONNECTOR/BAFFLE 88 NUT, /8 NE NYLOCK ZP 8 00 BOLT, /8 X -/ GR HCS ZP 8 PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

50 AIR MANIFOLD SECTIONAL MANIFOLDS - HEADERS 0/ Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

51 0/ SECTIONAL MANIFOLDS - HEADERS AIR MANIFOLD ITEM PART NUMBER - CWS MANIFOLD ASSEMBLY DESCRIPTION MFLD. ( 0) QTY 9- WELDMENT, FT. CWS RH/LH MANIFOLD ( ) - WELDMENT, FT. CWS RH/LH MANIFOLD (. ) MFLD. -/ ( ) QTY 0 MFLD. ( 00) QTY 90- WELDMENT, 0 FT. CWS RH/LH MANIFOLD ( ) 9- WELDMENT, 0 FT. CWS RH/LH MANIFOLD (. ) 0 MFLD. -/ ( 0) QTY - WELDMENT, FT. CWS RH/LH MANIFOLD ( ) 9-00 ASSEMBLY, 0 FT. CWS CENTER MANIFOLD ( ) (INCLUDES ITEMS -) WELDMENT, 0 FT. CWS CENTER MANIFOLD ( ) 0-00 DECAL, CWS LOGO (YELLOW) -00 PLATE, CONNECTOR/BAFFLE 00 BOLT, /8 X -/ GR HCS ZP 88 NUT, /8 NE NYLOCK ZP -00 ASSEMBLY, FT. CWS CENTER MANIFOLD (. ) (INCLUDES ITEMS -) WELDMENT, FT. CWS CENTER MANIFOLD (. ) 0-00 DECAL, CWS LOGO (YELLOW) -00 PLATE, CONNECTOR/BAFFLE 00 BOLT, /8 X -/ GR HCS ZP 88 NUT, /8 NE NYLOCK ZP ASSEMBLY, 0 FT. CWS CENTER MANIFOLD (. ) (INCLUDES ITEMS -) WELDMENT, 0 FT. CWS CENTER MANIFOLD (. ) 0-00 DECAL, CWS LOGO (YELLOW) -00 PLATE, CONNECTOR/BAFFLE 00 BOLT, /8 X -/ GR HCS ZP 88 NUT, /8 NE NYLOCK ZP 9-00 ASSEMBLY, FT. CWS CENTER MANIFOLD ( ) (INCLUDES ITEMS -) MFLD. ( ) QTY WELDMENT, FT. CWS CENTER MANIFOLD ( ) 0-00 DECAL, CWS LOGO (YELLOW) -00 PLATE, CONNECTOR/BAFFLE 00 BOLT, /8 X -/ GR HCS ZP 88 NUT, /8 NE NYLOCK ZP PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

52 DROP TUBE KIT ALL MODELS 0/ MANIFOLD LENGTH # OF SHORT DROP TUBES (99) # OF LONG DROP TUBES (90) 8 ( TUBE SPACING) (-/ TUBE SPACING) ( TUBE SPACING) (-/ TUBE SPACING) 9 9 ( TUBE SPACING) 0 (-/ TUBE SPACING) 0 0 ( TUBE SPACING) (-/ TUBE SPACING) 0 ( TUBE SPACING) 0 (-/ TUBE SPACING) ( TUBE SPACING) 8 DROP TUBE KIT ITEM PART NUMBER DESCRIPTION QTY. 90 KIT, LONG DROP TUBE (INCLUDES ITEMS BELOW NUT, / SERRATED FLANGE NC ZP U-BOLT, /-8 X 8.9 X ASSEMBLY, LONG AIR TUBE FOAM SEAL-AIR TUBE (NOT SHOWN) 99 KIT, SHORT DROP TUBE (INCLUDES ITEMS BELOW NUT, / SERRATED FLANGE NC ZP U-BOLT, /-8 X 8.9 X ASSEMBLY, SHORT AIR TUBE FOAM SEAL-AIR TUBE (NOT SHOWN) Page 8 New Holland/Case IH Crary Wind System Parts Catalog PN R00

53 0/ ALL MODELS SWITCH/MOUNT PLATE ASSEMBLY SWITCH/MOUNT PLATE ASSEMBLY ( ) ITEM PART NUMBER DESCRIPTION QTY DECAL, ACTUATOR SWITCH 89 ELECTRIC SWTICH ASSEMBLY - SPLIT AMP (INCLUDES ITEM BELOW) 90 SWITCH, P COL HERS 0-0 (NOT SHOWN) 80 ELECTRIC SWITCH ASSEMBLY - SPLIT AMP (INCLUDES ITEM BELOW) 90 SWITCH, P COL HERS 0-0 (NOT SHOWN) - PLATE, SWITCH MOUNT ATTACHMENT, 9 FT. EXTENSION HARNESS ITEM PART NUMBER DESCRIPTION QTY HARNESS, 9 FT PACKARD EXT PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page 9

54 Page 0 New Holland/Case IH Crary Wind System Parts Catalog PN R00

55 Parts Catalog Crary Wind System OPTIONS PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

56 KIT, NEUTRAL DRIVE SHAFT SPLINE/HEX SHAFT 0/ KIT, NEUTRAL DRIVE SHAFT ( 0) ITEM PART NUMBER DESCRIPTION QTY 0 BOLT, /8 X CRG 0 WASHER, /8 SAE FLAT 88 NUT, /8 NYLOCK 09 BEARING, -/8 IN. ROUND BORE 00 FLANGETTE, MSI - /8 IN SHAFT, -/8 SPLINE TO HEX Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

57 0/ SPLINE/ SPLINE SHAFT KIT, NEUTRAL DRIVE SHAFT KIT, NEUTRAL DRIVE SHAFT ( 988) ITEM PART NUMBER DESCRIPTION QTY 0 BOLT, /8 X CRG 0 WASHER, /8 SAE FLAT 88 NUT, /8 NYLOCK 09 BEARING, -/8 IN. ROUND BORE 00 FLANGETTE, MSI - /8 IN SHAFT, -/8 SPLINE STUB PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

58 KIT, GEARBOX/FAN EXTENSION ALL MODELS 0/ Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

59 0/ ALL MODELS KIT, GEARBOX/FAN EXTENSION GEARBOX/FAN EXTENSION KIT ( 9) ITEM PART NUMBER DESCRIPTION QTY 08 0 MM BEARING 0 U-BOLT, FAN MOUNT /8 X X ZP 00 BOLT, /8 X GR HEX CAPSCREW ZP 0 BOLT, / X GR HEX CAPSCREW ZP 0 BOLT, / X -/ GR HEX CAPSCREW ZP 0 WASHER, /8 FLAT ZP 0 NUT, /8 HEX NUT NC ZP 8 09 NUT, / CENTER LOCKNUT ZP 9 09 WASHER, / SAE FLAT ZP 0 KEY, / SQ X PLAIN SHAFT/COUPLER WELDMENT 9- HUB, MACHINED EXTENSION 0- PLATE, BEARING RETAINER 8- BRACKET, EXTENSION SUPPORT - CASE IH (SHORT) 9- BRACKET, EXTENSION SUPPORT - CASE IH (LONG) 0- BRACKET, EXTENSION SUPPORT - JD/NH - BRACKET, EXTENSION SUPPORT - GLEANER PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

60 STATIC PRESSURE GAGE ALL MODELS 0/ INCLUDED WITH PN 0-00 ASSEMBLY, STATIC PRESSURE GAGE ( 09-00) ITEM PART NUMBER DESCRIPTION QTY 9-00 GAGE, LOW PRESSURE AIR 0-00 ADAPTOR, -FMNPT/-MJIC BULKHEAD WASHER,.8 X.00 X GRIP, ROUND VINYL (W/HOLE) 0 WASHER, / FLAT Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

61 Parts Catalog Crary Wind System PARTS INDEX PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

62 Part # Page(s) Part # Page(s) Part # Page(s) ,,,,,0,,, , ,, , , ,,,9, , ,... 9,... 9, , ,... 9,...,,,0,, , , , , , ,,, , , , , , , , , , , , , , , , , 00..., ,, 00...,,,, 00..., ,9, 0...,,0,,8,9, 0...,,, 0..., 0..., 0...,9,, 0...,,,,,,, ,,,,,8,9, 0..., 0..., 0..., 0...,,8,9,0,,,,, , ,0,,,, ,9,0, 08..., , 09..., 09...,8,9,0,, , , , ,......, ,, 0...,,,,, 8...,,,9...,......,,,,,8...,,,,9,,...,, ,,8,9,0,,,,,,9,,,,, 90...,, 9...,,,, ,,...,,...,,..., 8..., 98...,,,0,,...,...,,... 9,......,,,,,,, , ,,,,, , 0...,,, 09...,,,,9, 09...,,,9, ,,, 00...,,, ,,9,...,,9, ,, , , 9...,......,...,,,9,...,,...,, ,, ,9,0,,,..., , 8..., 0..., ,9,0,, ,..., ,9,0,,,, ,, , ,, , ,, , , , ,9,0, 8-...,,,,9, ,, ,0, Page 8 New Holland/Case IH Crary Wind System Parts Catalog PN R00

63 Part # Page(s) Part # Page(s) Part # Page(s) ,9,0, , , ,,, , , , , , ,, , ,, , ,0,, , , ,,, ,9, ,9, , , , , 9-..., ,9, , , -...,9, 9-...,9, 9..., , , PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page 9

64 Page 0 New Holland/Case IH Crary Wind System Parts Catalog PN R00

65 PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

66 Page New Holland/Case IH Crary Wind System Parts Catalog PN R00

67 PN R00 New Holland/Case IH Crary Wind System Parts Catalog Page

68 TH ST. NW P.O. BOX 89 WEST FARGO, ND PH: FAX: (0) Manufactured in the United States of America by Crary Industries

PARTS MANUAL CRARY WIND SYSTEM

PARTS MANUAL CRARY WIND SYSTEM John Deere 930D 936D Manual P/N 53332-00 Rev. 060309 Companion to P/N 53331-00 SN Range: 806733-B01394 HOW TO REACH US ADDRESS HOURS TELEPHONE FAX NUMBER E-MAIL INTERNET