Daikin McQuay. Roofpak Condensing Unit Medium Cabinet, Standalone Standard & Digital Compressor Models

Transcription

1 Replacement Parts List No Revision S 0/08 Daikin McQuay Roofpak Condensing Unit Medium Cabinet, Standalone Standard & Digital Compressor Models RCS Tons Vintage D Code = A, A, YA Unit Model Code 44= R, D To find your Daikin Applied parts distributor, call or visit

2 Contents Parts List Revision History... Nomenclature Serial Number... 4 Model Number... 4 Electrical Legend... 5 Condenser Section Notes... 6 Fan Deck- Unit Sizes D... 7, 8 Fan Deck- Unit Sizes D... 9, 0 Quiet Fan Assemblies: Code 47=, 4... Compressors & Compressor Components Unit Size 045D, 050D: Code 44= R OR D... Unit Size 060D, 06D: Code 44= R OR D... Unit Sizes D: Code 44= R... 4 Digital Compressors & Components: Code 44= R AND Code 60= XX OR Code 44= D... 5, 6 Control Box Notes... 7 Control Box Component Label Diagram... 8 Control Panel: (0/ & Earlier) Control Box Diagram... 9 Common Components... 0, Compressor Contactors and Motor Protectors Unit Size 045D Compressor MMP- 4 and Contactor M Unit Size 050D Compressor MMP- 4 and Contactor M Unit Size 060D, 06D Compressor MMP- 4 and Contactor M Unit Size 070D, 07D Compressor MMP- 6 and Contactor M Unit Size 075D Compressor MMP- 6 and Contactor M Condenser Fan MMP,,,,, and Contactors M- 4- Fantrol Units... 7 Condenser Fan MMP-, Contactors M- 4, Fuses F & F- Speedtrol Units... 8 Control Panel: (04/0 & Later) Control Box Diagrams... 9 Common Components... 0, Compressor Contactors and Motor Protectors 045D Compressor MMP- 4 and Contactor M D Compressor MMP- 4 and Contactor M D, 06D Compressor MMP- 4 and Contactor M D, 07D Compressor MMP- 6 and Contactor M D Compressor MMP- 6 and Contactor M Condenser Fan MMP,,,,, and Contactors M- 4- Fantrol Units... 8 Condenser Fan MMP-, Contactors M- 4, Fuses F & F- Speedtrol Units... 9 Pressure Manifolds D Pressure Manifolds D... 4 Factory Supplied Line Voltage Box: Code = YYYFY... 4 Tubing Valves, Filter Driers, Sight Glasses, & Hot Gas Bypass/Liquid Line Kits... 4 Critical Parts List... CPL Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page

3 Parts List Revision History Rev. Date Description A- P 08/6 Archived Revs. A- P. Q 06/7 Cover: Added Standard and Digital Compressor Models to form title. Master pg. Changed Condenser to Condensing Unit. Page 4: Added footnote #. Page 5: Updated Electrical Legend. Page 6 (NEW): Added pg. with Notes. Repaginated form & updated the TOC. Page 6, 8 (OLD) 7, 9 (NEW): Updated dwgs. Misc. updates. Rewrote footnotes. Page 7, 9 (OLD) 8, 0 (NEW): Updated p/ns & qtys. Rewrote footnotes. Page - 4 (OLD) -5 (NEW): Misc. updates. Rewrote footnotes. Page : Added footnote #. Page 5 (OLD) 8 (NEW): Rewrote footnotes & pg. Header. Moved 4/ & later dwg. to pg. (NEW). Page 6 (OLD): Deleted pg. Repaginated form and updated the TOC. Page 6, 7 (NEW): Added pg. for Digital Cmpr. p/ns. Repaginated the form & updated the TOC. Page 8 (NEW): Added pg. with Notes. Repaginated the form & updated the TOC. Page 8 (OLD) (NEW): Updated TD, description & p/n. Rewrote footnote # 4. Page 0-7 (OLD) - 0 (NEW): Updated dwgs. & p/ns. Page 8, 9 (OLD), (NEW): Updated/added misc. p/ns & descriptions. Rewrote footnotes. Page (NEW): Added pg. for MCBOX diagrams. Repaginated the form & updated the TOC. Page 0 (OLD) 4 (NEW): Updated/added misc. transformers & components. Page 4 (OLD 46 (NEW): Added/updated p/ns. Rewrote pg. header and footnotes. Updated the TOC. Page CPL (NEW): Added pg. for CPL. Repaginated the form & updated the TOC. R 09/7 Page 5: Deleted N/A PB4 info. Page 8: Rewrote Notes. Page, : Updated PB4 info. Deleted PB4 info. Updated PVM, p/ns as needed. S 0/8 Various: Deleted info re. RCS068. Only one unit was produced. Page 4, 6, 8 (OLD) 4, 5, 6 (NEW): Deleted pg. Repaginated the form & updated the TOC. Page 7, 8 (OLD) 6, 7 (NEW): Rewrote pg. header. Daikin Applied, 600 Industrial Park Blvd., P.O. Box 55, Minneapolis, MN (76) Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page

4 Plant Identification FBO = Faribault, MN U= Unit Nomenclature Serial Number FBO U Serial Number (build sequence) Month of Manufacture 0= January 05= May 0= February 06= June 0= March 07= July 04= April 08= August Year of Manufacture 08= = 009 0= 00 etc. Model Number RCS 050D Y Y Y Y EY D AL P A Y Y Y Y YP YYYY YY YY YYYY YYY YYYFY All Y s Code MY R Y All Y s YY YY All Y s AAY 047C Y B YY Code = September 0= October = November = December Codes 0-06= Always Y (Qty. 4) Code 07= Unit Approval Listings CY= ETL- Canada EY= ETL/MEA USA YY= None Code 08= Control Box Location D= Standard Code 09= Unit Voltage = 08/60/ 9= 0/60/ 7= 460/60/ 7= 575/60/ Code 0= Starting Option AL= Across- the- Line Code = Field Power Connection A= Single Disconnect w/through-the-door Mechanism. P= Single Power Block YY= None- Field wire to Fusing Code = Temperature Controls Package YA= No Temperature Controller, Standalone, Less Transformer A= No Temperature Controller, Standalone, 5V Transformer A= No Temperature Controller, Standalone, 4V Transformer Codes -6= Always Y (Qty. 4) Code 7= Miscellaneous Auxiliary Controls YP= Phase Failure YG= Ground Fault Protection YC= YP + YG YY= None Code 8= Misc. Control Functions AYYY, SYYY, YYYY= Misc. Control Functions Codes 9-= Always Y (Qty. ) Code = Miscellaneous Electrical Options YYYYY= Field Supplied 5V Power, Outlet by Factory YYYFY= Factory Supplied Line Voltage and Outlet **A**= ABB SpeedTrol Inverter **B**= Daikin Applied SpeedTrol Inverter **Q**= Schneider SpeedTrol Inverter Codes 4-4= Always Y (Qty. 65) Code 4= Compressor Capacity Control 4= 4 steps 6= 6 steps Note that there are some Digital Scroll Compressor units built as specials (Code 44= R AND Code 60= XX WITH Digital Scroll compressors listed as a special feature). For these units contact Daikin Applied with model and serial number information so that the correct part(s) can be identified. Code 4= Condenser Options Digit Air Coil M= 5mm Micro Channel Coil P= 5mm Electrofin Coated Micro Channel Coil T= mm Micro Channel Coil U= mm Electrofin Coated Micro Channel Coil Y= None Digit Condenser Options G= Coil Guards, Steel S= Seal Tite Conduits B= G + S Y= None Code 44= Compressor Type R= Scroll R40a Code 45= Compressor Isolation = Resilient Rubber-in-Shear (RIS) Code 46= Hot Gas Bypass = HGBP Circuit # = HGBP Circuits # & Y= None Code 47= Low Ambient Operation = Fantrol = Speedtrol = Quiet Fan Fantrol 4= Quiet Fan w/ Speedtrol Code 48= IBC Seismic/Power Correction Capacitors Y= None Codes 49-54= Always Y (Qty. ) Code 55 Ultra High Efficiency Units HE= Ultra High Efficiency Unit YY= None Code 56= Chicago Refrigeration Service Valves CC= Chicago Code CV= Chicago Code w/ Valves YY= Service Valves Codes 57-60= Always Y (Qty. 4) Codes 6-64= Misc. Options, Packaging and Warranties Code 65= Unit Family Designation 047C= D Code 66= Always Y Code 67= ASHRAE Certification Y= None B= AHRI Certified C= AHRI Certified Code 68= Short Circuit Current Rating (SCCR) YY= None 0= 0 SCCR = SCCR 65= 65 SCCR Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 4

5 Electrical Legend Schematic Sym. Description Location AFD/VFD, Inverters, Speedtrol Control Box CDT Digital Compressor Discharge Thermistor Condenser Section COMPR.- 6 Compressors Condenser Section CS, Control Switches Control Box DCC Digital Compressor Controller Control Box DS4 Disconnect Control Box DS6 Disconnect, Factory Powered Outlet 0V Service Panel FUA, B Fuses, Control Circuit, T Primary Control Box FUC Fuse, Control Circuit, T Secondary Control Box F6A, B Fuses, Transformer, (T6) Primary Condenser Section F6C Fuse, Transformer, (T6) Secondary Condenser Section F, Fuses, Speedtrol Inverter Control Box GFS4 Ground Fault Sensor Control Box GFR4 Ground Fault Relay Control Box GRD Ground Control Box HP, High Pressure Controls, Refrigerant Control Box Manifold HTR- 6 Crankcase Heaters On Compressors LP, Low Pressure Controls, Refrigerant Control Box Manifold LR, Line Reactors Control Box M- 6 Contactors, Compressors Control Box M- 5 Contactors, Condenser Fans, Circuit # Control Box M- 5 Contactors, Condenser Fans, Circuit # Control Box MJ Mechanical Jumpers Control Box MMP- 6 Manual Motor Protectors, Compressors Control Box MMP- 4 Manual Motor Protectors, Condenser Fans Ckt. Control Box MMP- 4 Manual Motor Protectors, Condenser Fans Ckt. Control Box MP- 6 Motor Protectors, Compressors On Compressors PB4 Power Block, Condenser Control Box PC, Switches- Fan Pressure Control Box Manifold PC9 Pressure Control, Split Coil Condenser Section PT, Pressure Transducers, SpeedTrol Control Box PT9 Pressure Transducer, Split Coil Condenser Section PVM4 Phase Voltage Monitor Control Box R, Relays, High Pressure Reset Control Box R5-8,, 4 Relays, Compressor, Safety/Cool Fail Control Box R, 7 Relays, Speedtrol Control Box R- 8 Relays, Compressor Contactor Staging Control Box R70-90 Relays, Digital Compressor Controller Control Box REC Receptacle, Condenser Box Control Box REC Receptacle, Field Power, 5VAC Bulkhead S Switch, System On/Off Control Box SPTRL Switch, Speedtrol Control Box Manifold SV7 Solenoid Valve, Digital Compressor Condenser Section SV9 Solenoid Valve, Split Coil Condenser Section T Transformer, Main Control Box T6 Transformer- 0V Factory Supplied Receptacle 0V Service Panel T9 Transformer- 0/4V Control Box T Transformer, Speedtrol, Line/40VAC Condenser Section T Transformer, Digital Cmpr. Controller, Line/5VAC Control Box T Transformer, Digital Compressor Controller, 5/4VAC Control Box TB- 6 Terminal Blocks Control Box TC- 4 Temperature Controls, FanTrol Condenser Section TD, Time Delays, Compressor Lockout Control Box TD9 Time Delay, Split Coil Control Box Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 5

6 Condenser Section Notes Primary Codes that pertain: 09, 4, 4, 44, 47 The Condenser section houses the Compressors, Condenser Coils, Condenser Control Box, Pressure Controls, and Fan Deck. RCS units have the pressure controls mounted on the Control Box Manifold. SpeedTrol Inverters and Line Reactors are located in the Control Box. Note that a number of model changes were made in mid 0. The RCS060D was dropped in favor of the RCS06D; the 070D was replaced by the 07D; and the RCS075D was discontinued. Code 09, unit voltage, affects Compressor selection. Code 4 indicates Compressor capacity control. Code 4 determines if the Micro Channel Condenser Coils are coated or not, and if the unit is equipped with Coil/ Vandal Guards AND/OR Sealtite conduits. Code 44 shows the type of compressor selected. Code 44= R NORMALLY stands for units with ALL standard scroll compressors. However, starting in late 04, some units were built as specials with digital scroll compressors with Code 44= R AND Code 60= XX with digital scroll compressors listed as a special feature (refer to the drawing below for an example of Special Code String Text). Confirm the presence of a digital compressor BEFORE ordering to ensure that the correct part(s) are identified. Code 44= D also indicates the presence of digital compressors. Code 47 determines Condenser Fan operation: FanTrol [Standard operation] (Code 47=, ), or SpeedTrol [Low Ambient operation] (Code 47=, 4). If Code 47=, the unit is equipped with optional Quiet Fan assemblies and FanTrol. If Code 47= 4, the unit is equipped with optional Quiet Fan assemblies and SpeedTrol. NOTE: This form is to be used for RCS Standalone units only (Code = *A). For RCS D units when Code DOES NOT EQUAL *A refer to form # Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 6

7 Condenser Section Fan Deck D Diagrams Fan Detail Motor Mount to Fan Panel Mounting Detail Fan Layout Detail 0 Fan # Fan # End of Unit Fan # Fan # 045, 050, 060D Fan Deck Detail CDF60 CDF50 Fan # Fan # Fan # Fan # Fan # CDF5 Fan # CDF5 MOTOR GND WIRE End of Unit 06 Fan Deck Detail 5 (045, 050, 060D shown) Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 7

8 Condenser Section Fan Deck D Components Unit Size Ref. Part Part No. Description Number Condenser Coils Code 4= M* 5.5 x 7 6/ & Earlier x 7 7/ thru 5/ x 7 6/4 & Later Condenser Coils Code 4= T* 5.5 x Condenser Coils, Coated Code 4= P* 5.5 x 7 6/ & Earlier x 7 7/ thru 5/ x 7 /4 & Later Condenser Coils, Coated Code 4= U* 5.5 x Condenser Fan Motor Code 47=, FanTrol/SpeedTrol 08/0/ FanTrol/SpeedTrol Condenser Fan Deck Code 47=, 55 Panel- Blank NA NA NA 0 Top Panel Fan Propeller Motor Mount Grommet Spacer- Steel Screw- Cap Nut- Lock Washer, Narrow- Plain Washer, Wide- Plain Fan Guard N/S Vandal Guard Kit N/S= Not shown on Diagram. Due to production overlap, contact Daikin Applied with model and serial number information to ensure that the correct coil is identified. The original FanTrol motor (Code 47= ) is obsolete and no longer available. Use inverter duty motor for ALL applications when Code 47= OR. This is only one of two pieces that make up the Motor mount. For a complete Motor Mount, order a quantity of TWO per Motor. Quantity listed is the TOTAL for the unit. 08/0V 08/0V 460/V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 8

9 Condenser Section Fan Deck D Diagrams Fan Detail Motor Mount to Fan Panel Mounting Detail Fan Layout Detail 50 Fan # 55 End of Unit Fan # Fan # 070D Fan Deck Detail Fan # Fan # Fan # Fan # Fan # 4 Fan # 4 (075D shown) Fan # End of Unit Fan # 5 Fan # Fan # Fan # End of Unit 07, 075D Fan Deck Detail Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 9

10 Condenser Section Fan Deck D Components Unit Size , 075 Ref. Part Part No. Description Number Condenser Coils Code 4= M* 5 x 84 6/ & Earlier x 84 7/ thru 5/ x 84 6/4 & Later Condenser Coils, Coated Code 4= P* x 84 7/ & Earlier x 84 8/ thru / x 84 /4 & Later Condenser Fan Motor Code 47=, FanTrol/SpeedTrol 08/0/ FanTrol/SpeedTrol Condenser Fan Deck Code 47=, 55 Panel, Blank Top Panel Fan Propeller Motor Mount Grommet Spacer- Steel Screw- Cap Nut- Lock Washer, Narrow- Plain Washer, Wide- Plain Fan Guard N/S Vandal Guard Kit N/S= Not shown on Diagram. Due to production overlap, contact Daikin Applied with model and serial number information to ensure that the correct coil is identified. The original FanTrol motor (Code 47= ) is obsolete and no longer available. Use inverter duty motor for ALL applications when Code 47= OR. This is only one of two pieces that make up the Motor mount. For a complete Motor Mount, order a quantity of TWO per Motor. Quantity listed is the TOTAL for the unit. 08/0V 08/0V 460/V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 0

11 Condenser Section Quiet Fan Assemblies Code 47=, 4 Ref. Part Part Unit Size No. Description Number Quiet Fan Assy. 08V V Panel, Blank NA Quiet Fan Assemblies are sold as assemblies ONLY. Individual components including the Motor, Fan Prop, Fan Guard, Motor Mount, and Fan Top Panel are NOT available separately. Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page

12 Condenser Section Standard Compressors & Compressor Components Unit Size 045D, 050D: Code 44= R OR D Side View Compressor Rail to Base Channel Mounting Detail (6 places) Compressor Rail Compressor Mounting Channel Standard Cmpr. Units Circuit # & AND Digital Scroll Cmpr. Units: Circuit # Unit Size Ref. Part Part No. Description Number Compressors 0HP Compressors 0HP Compressors 0HP Compressors HP Compressors HP Compressors HP Grommet Sleeve Screw Washer- Plain Washer- Lock Junction Box- Compressor Heater- Crankcase Screw- Junction Box Gasket- Junction Box NOTE: Quantities listed are for the unit. Compressors are factory mounted in TANDEM assemblies, but REPLACEMENT COMPRESSORS ARE AVAILABLE AS SINGLE COMPRESSORS ONLY as shown above. A Tandem compressor is two compressors piped together in one assembly. There are two tandems per unit (one on each circuit). When replacing a single compressor out of a Tandem assembly, the original piping is reused. 4 feet per junction box. Note that there are some Digital Scroll Compressor units built as specials (Code 44= R AND Code 60= XX WITH Digital Scroll compressors listed as a special feature). Digital Compressors are ALWAYS located in Circuit #. For these units refer to the Digital Compressors & Components page at the end of this section. 08/0V 08/0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page

13 Condenser Section Standard Compressors & Compressor Components Unit Size 060D, 06D: Code 44= R OR D Side View Compressor Rail to Base Channel Mounting Detail (6 places) 07 Compressor Rail or Compressor Mounting Channel Standard Cmpr. Units Circuit # & AND Digital Scroll Cmpr. Units: Circuit # Size 060,06 Ref. Part Part No. Description Number, Compressors 4/4 & Earlier Compressors 5/4 & Later Compressors 4/4 & Earlier Compressors 5/4 & Later Compressors 4/4 & Earlier Compressors 5/4 & Later Grommet Sleeve Screw Washer- Plain Washer- Lock Heater- Crankcase NOTE: Quantities listed are for the unit. Compressors are factory mounted in TANDEM assemblies, but REPLACEMENT COMPRESSORS ARE AVAILABLE AS SINGLE COMPRESSORS ONLY as shown above. A Tandem compressor is two compressors piped together in one assembly. There are two tandems per unit (one on each circuit). When replacing a single compressor out of a Tandem assembly, the original piping is reused. Note that there are some Digital Scroll Compressor units built as specials (Code 44= R AND Code 60= XX WITH Digital Scroll compressors listed as a special feature). Digital Compressors are ALWAYS located in Circuit #. For these units refer to the Digital Compressors & Components page at the end of this section. 08/0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page

14 or 45 Condenser Section Standard Compressors & Compressor Components Unit Sizes D: Code 44= R Side View Discharge Tubing Top View Gas Tubing Suction Tubing Circuit # Comp. # Comp. # Comp. #5 Circuit # Comp. # Comp. # Comp. #5 or or or or or or or or Circuit # Comp. # Comp. #4 Comp. #6 Circuit # Comp. # Comp. #4 Comp. #6 Compressor to Compressor Rail Mounting Detail Compressor Rail to Base Channel Mounting Detail (8 places) Compressor Rail Compressor Mounting Channel Unit Size 070, Ref. Part Part No. Description Number, Compressors- Circuits # or 0HP Compressors- Circuits # or 0HP Compressors- Circuits # or 0HP Compressors- Circuits # or HP Compressors- Circuits # or HP Compressors- Circuits # or HP Grommet Sleeve Screw Washer- Plain Washer- Lock Sight Glass- Gas Line Junction Box- Compressor Fitting- Rotolock Heater- Crankcase Screw- Junction Box Gasket- Junction Box Rail- Trio Compressor Mounting Spacer Screw Washer feet per junction box. 08/0V 08/0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 4

15 Condenser Section Digital Compressors & Components, Circuit #, Unit Size 045D- 06D: Code 44= R AND Code 60= XX OR Code 44= D, Digital Compressor Detail Compressor Rail to Base Channel Mounting Detail /0V Unit Size Ref. Part Part No. Description Number 0 Compressor- Digital, Circuit # Compressor- Digital, Circuit # Compressor- Digital, Circuit # Compressor- Digital, Circuit # Compressor- Digital, Circuit # Compressor- Digital, Circuit # Compressor- Digital, Circuit # 0 Thermistor- Discharge (CDT) Compressor Mounting Kit N/S Heater- Crankcase N/S Heater- Crankcase Kit- Unloader Coil, 0V (SV7) NOTE: Quantities listed are for the unit. N/S= Not shown on diagram. There are some Digital Scroll Compressor units built as specials (Code 44= R AND Code 60= XX) WITH Digital Scroll compressors listed as a special feature (refer to the Notes page at the beginning of this section for more information). Digital Compressors are ALWAYS located in Circuit #. Compressors are factory mounted in TANDEM assemblies, but REPLACEMENT COMPRESSORS ARE AVAILABLE AS SINGLE COMPRESSORS ONLY as shown above. A Tandem compressor is two compressors piped together in one assembly. There are two tandems per unit. When replacing a single compressor out of a Tandem assembly, the original piping is reused. For unit sizes/voltages not shown contact Daikin Applied with model and serial number information to ensure that the correct part(s) are identified. 08/0V 08/0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 5

16 Condenser Section Digital Compressors & Components, Circuit #, Unit Size 045D- 06D: Code 44= R AND Code 60= XX OR Code 44= D Control Box Detail Unit Size Ref. Part Part No. Description Number FA, B Fuse- T Primary 08V FC Fuse- T Secondary 4EHG766 T Transformer- 5/4V 08V N/S Cover- Terminals N/S Cover/Fuseholder T Transformer- 5/4VAC N/S= Not shown on diagram. There are some Digital Scroll Compressor units built as specials (Code 44= R AND Code 60= XX) WITH Digital Scroll compressors listed as a special feature (refer to the Notes page at the beginning of this section for more information). Digital Compressors are ALWAYS located in Circuit #. For voltages not shown contact Daikin Applied with model and serial number information to ensure that the correct part(s) are identified. Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 6

17 Notes Primary Codes that pertain: 09,,, 7, 8,, 47, 68 In March and April of 0, the Condenser Control Box underwent a major redesign. This design change not only changed components, but some Contactor, Motor Protector, and VFD circuiting changed. Note that components and component accessories such as Auxiliaries, Links, etc. are NOT interchangeable. For units built and shipped during the transition, confirm which design was used, or contact Daikin Applied to ensure that the correct part(s) are identified. Code 9 determines unit voltage and affects the Transformers, Motor Protectors/MMPs, Contactors, Fuses, etc. Code determines whether the main power connection is a Terminal Block or a through-the-door Disconnect Switch. For Stand Alone Condensing Units Code is ALWAYS A, A, or YA. This indicates that the unit is NOT equipped with factory mounted controls, but instead has a Transformer (Code = A, A) and Control Relays OR just Control Relays (Code = YA). For information specific to RCS units equipped with a factory mounted MicroTech controller OR Floating Point Control (RCS D units when Code DOES NOT= *A), refer to RPL form Code 7, 8, and determine miscellaneous electrical options including whether the unit has a Freezestat, PVM (Phase Voltage Monitor), Ground Fault Protector, SpeedTrol Inverters, and/or a factory mounted Service Outlet. Code 47 determines Condenser Fan operation: FanTrol [Standard operation] (Code 47=, ), or SpeedTrol [Low Ambient operation] (Code 47=, 4). If Code 47=, the unit is equipped with optional Quiet Fan assemblies and FanTrol. If Code 47= 4, the unit is equipped with optional Quiet Fan assemblies and SpeedTrol. Code 68 specifies the SCCR or Short Circuit Current Rating for the unit. Standard units are always rated at 0 SCCR (Code 68= 0, OR no entry). An entry with any other rating (Eg: Code 68=, 65 OR indicated in the specials description in the Code String lookup) may change disconnect switches, circuit breakers, fuses, and other miscellaneous components. When control box parts are required for units with nonstandard SCCR ratings, contact Daikin Applied with model and serial number information so that the correct part(s) can be identified. NOTE: This form is to be used for RCS Standalone units only (Code = *A). For RCS D units when Code DOES NOT EQUAL *A refer to form # Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 7

18 Control Box Component Label Diagram Note that starting in late 00 all units will have a label similar to the one shown above pasted to the inside of the Control Box door. This label contains schematic designators, part descriptions, and Daikin Applied part numbers. The label shown above is for representative purposes only. Actual part numbers will vary depending upon unit size and options selected. Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 8

19 Diagram: (/ & Earlier), PL5-0 For information on RCS units WITH controls (Code = *E, *F), OR with no Temperature controls and floating point control (Code = YM), refer to form # The above diagram shows a typical RCS Standalone Unit Control Box layout and is to be used for reference only. Specific unit configuration may differ depending upon unit size and options selected. Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 9

20 Common Components: (/ & Earlier) Sch. Part Part Qty. Sym. Description Number Switches- Control CS, Switch- Control- Pole Code = A Switch- Control- Pole Code = A S Switch- System Receptacle REC Receptacle Relays R, Relay- Hi Pressure Reset R5. Relay- Safety R6. Relay- Safety R7. Relay- Safety R8. Relay- Safety R Relay- Inverter AFD Code 47= R. Relay- Safety R4. Relay- Safety R7 Relay- Inverter AFD Code 47= R- R6 Relay- Compressor Contactor Staging Code = A /comp Time Delays TD, Time Delays, Compr. Lockout 4 Temp. Controls TC Temperature Control- Fantrol TC4 Temperature Control- Fantrol Ground Fault Protection Code 7= YG, YC GFR4 Ground Fault Relay- SPDT GFS4 Ground Fault Sensor Phase Voltage Monitor Code 7= YP, YC PVM4 Phase Voltage Monitor 08/0/ Units 000 Units 000 Plugs PL5-0 Plug- Pin /comp Terminal Blocks TB,,5,6,8 Terminal Block var. Transformers T Transformer- Main T9 Transformer- 5/4VAC Speedtrol Inverters Code 47= AFD, Inverter 08/0V Inverter Inverter Speedtrol Line Reactors Code 47= LR, Line Reactor Code 09= Part number is for one section. Quantity of sections varies with unit options. Ground Terminal is p/n Jumpers for TB are p/n (TBA:5), (TBB:4), (TBC:0,TBD:5 & TBE:0). Each relay uses a socket p/n See following page. 4 Two Time Delay relays have been furnished. The most common is the NON-Adjustable type p/n The ADJUSTABLE version of this relay could also have been supplied: p/n Confirm which relay is required BEFORE ordering. Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 0

21 Common Components: (/ & Earlier), Continued Sch. Part Part Qty. Sym. Description Number Disconnect Code = A, A DS4 Switch- Disconnect 00A Handle- Disconnect Shaft Mod Lug- Ground Switch- Disconnect 50A Handle- Disconnect Shaft Mod Lug- Ground Switch- Disconnect 50A Handle- Disconnect Shaft Mod Lug- Ground Switch- Disconnect 400A Handle- Disconnect Shaft Mod Lug- Ground Switch- Disconnect 600A Handle- Disconnect Shaft Mod Lug- Ground Power Block- Main PB4 Main 75A A, 40A A Any of the listed parts may be used, depending on unit options. Check installed part to verify, or contact Daikin Applied with unit serial and/or GO number to ensure correct replacement is selected. The original Disconnect Switch and related parts are obsolete. Due to dimensional differences minor field modifications may be required for proper installation. T Transformer and Fusing Sch. Part Part Sym. Description Number T Transformer- Main Transformer- Main Transformer- Main FUA, B Fuse- T Transformer, Primary Fuse- T Transformer, Primary Fuse- T Transformer, Primary Fuse- T Transformer, Primary FUC Fuse- T Transformer, Secondary 0475 N/S Cover- Fuse N/S Puller- Fuse N/S= Not shown on diagram. 08V 0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page

22 Compressor MMP- 4 and Contactor M- 4: (/ & Earlier) Unit Size 045D Front Mounted A Front Mounted A MMP MMP B Link A Spacer Contactor Contactor MMP- 4 & M- 4 Contactor Link Detail 08, 0V MMP- 4 & M- 4 Contactor Link Detail 460, Ref. Sch. Part Part No. Sym. Description Number Compressor Contactors & Parts M- 4 Contactor- Compressor 50A Contactor- Compressor 40A Contactor- Compressor 5A A Spacer B Link Compressor MMP s & Parts MMP- 4 Manual Motor Protector- Compressor Manual Motor Protector- Compressor Manual Motor Protector- Compressor A Front Mtd. - NO AND NC Front Mtd. - NO OR NC In mid 00 the original cabled Contactor became obsolete and no longer available. The replacement Contactor listed mounts directly to the MMP as shown in the above diagram. When replacing ANY part of an old assembly, a new Contactor and MMP MUST be ordered as new and old parts are not interchangeable V 0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page

23 Compressor MMP- 4 and Contactor M- 4: (/ & Earlier) Unit Size 050D Front Mounted A Front Mounted A MMP MMP B Link A Spacer Contactor Contactor MMP- 4 & M- 4 Contactor Link Detail 08/0V MMP- 4 & M- 4 Contactor Link Detail 460, Ref. Sch. Part Part No. Sym. Description Number Compressor Contactors & Parts M- 4 Contactor- Compressor 65A Contactor- Compressor 5A A Spacer B Link Compressor MMP s & Parts MMP- 4 Manual Motor Protector- Compressor Manual Motor Protector- Compressor Manual Motor Protector- Compressor A Front Mtd. - NO AND NC Front Mtd. - NO OR NC In mid 00 the original cabled Contactor became obsolete and no longer available. The replacement Contactor listed mounts directly to the MMP as shown in the above diagram. When replacing ANY part of an old assembly, a new Contactor and MMP MUST be ordered as new and old parts are not interchangeable V 0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page

24 Compressor MMP- 4 and Contactor M- 4: (/ & Earlier) Unit Size 060D, 06D Front Mounted A Front Mounted A 4 MMP or B MMP A Spacer Link Contactor or Front Mounted C Contactor or MMP- 4 & M- 4 Contactor Link Detail 08, 0V Unit Size 060, 06 MMP- 4 & M- 4 Contactor Link Detail 460, Unit Size 060, Ref. Sch. Part Part No. Sym. Description Number Compressor Contactors & Parts M, Contactor- Compressor 65A 9468 M, Contactor- Compressor 40A 9468 M, Contactor- Compressor A 499 A Spacer B Link C Front Mtd. - NO AND NC M, 4 Contactor- Compressor 65A 9468 M, 4 Contactor- Compressor A 499 Compressor MMP s & Parts MMP, Manual Motor Protector- Compr Manual Motor Protector- Compr Manual Motor Protector- Compr Manual Motor Protector- Compr MMP, 4 Manual Motor Protector- Compr Manual Motor Protector- Compr Manual Motor Protector- Compr A Front Mtd. - NO AND NC Front Mtd. - NO OR NC In mid 00 the original cabled Contactor became obsolete and no longer available. The replacement Contactor listed mounts directly to the MMP as shown in the above diagram. When replacing ANY part of an old assembly, a new Contactor and MMP MUST be ordered as new and old parts are not interchangeable. Contact Daikin Applied with model and serial number information so that the correct part can be identified. Note that Size 06D replaced 060D units in mid 0. 08/0V 08/0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 4

25 Compressor MMP- 6 and Contactor M- 6: (/ & Earlier) Unit Size 070D, 07D Front Mounted A MMP 4 or Front Mounted A B Link MMP or 4 A Spacer Contactor or Contactor or MMP- 6 & M- 6 Contactor Link Detail 08, 0V Unit Size 070, 07 MMP- 6 & M- 6 Contactor Link Detail 460, Unit Size 070, Ref. Sch. Part Part No. Sym. Description Number Compressor Contactors & Parts M,, 5 Contactor- Compressor 50A 9468 Contactor- Compressor 40A 9468 Contactor- Compressor 5A 499 A Spacer B Link M, 4, 6 Contactor- Compressor 50A 9468 Contactor- Compressor 40A 9468 Contactor- Compressor 5A 499 Compressor MMP s & Parts MMP,, 5 Manual Motor Protector- Compr Manual Motor Protector- Compr Manual Motor Protector- Compr MMP, 4, 6 Manual Motor Protector- Compr Manual Motor Protector- Compr Manual Motor Protector- Compr A Front Mtd. - NO AND NC Front Mtd. - NO OR NC In mid 00 the original cabled Contactor became obsolete and no longer available. The replacement Contactor listed mounts directly to the MMP as shown in the above diagram. When replacing ANY part of an old assembly, a new Contactor and MMP MUST be ordered as new and old parts are not interchangeable. Note that Size 07D replaced 070D sized units in mid 0. Size 07D is a Standalone unit only (Code = *A). 08 0V 08V 0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 5

26 Compressor MMP- 6 and Contactor M- 6: (/ & Earlier) Unit Size 075D Front Mounted A Front Mounted A MMP MMP B A Spacer Link Contactor Contactor MMP- 6 & M- 6 Contactor Link Detail 08V MMP- 6 & M- 6 Contactor Link Detail 460, Ref. Sch. Part Part No. Sym. Description Number Compressor Contactors & Parts Contactor- Compressor 65A M- 6 Contactor- Compressor 5A A Spacer B Link Compressor MMP s & Parts MMP- 6 Manual Motor Protector- Compr Manual Motor Protector- Compr Manual Motor Protector- Compr A Front Mtd. - NO OR NC In mid 00 the original cabled Contactor became obsolete and no longer available. The replacement Contactor listed mounts directly to the MMP as shown in the above diagram. When replacing ANY part of an old assembly, a new Contactor and MMP MUST be ordered as new and old parts are not interchangeable V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 6

27 Condenser Fan MMP,,,,, & Contactors M- 4: (/ & Earlier) Fantrol Units (Code 47=, ) MMP 8 8 MMP Link 8B 8B Link 7 One Contactor Arrangement 7A Spacer Contactor 8C Bus Bar Contactor 7 7A Spacer Two Contactor Arrangement , 075 Ref. Sch. Part Part No. Symbol Description Number Fan Contactors/Parts 7 M- 4 Contactor- Cond. Fan A Spacer Fan MMP s & Parts 8 MMP- MMP- Fantrol Code 47= Code 47= Code 47= Code 47= Code 47= 4 Code 47= Code 47= Code 47= B Link- MMP C Bus Bar /0V 08/0V 08/0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 7

28 Condenser Fan MMP-, Contactors M- 4, Fuses F & F: (/ & Earlier) Speedtrol Units (Code 47= ) MMP & Contactors Detail Speedtrol Fuses MMP 8 MMP 8 Adapter 9C Link 8B Puller 8C 9B Link Contactor 8A 7 7A Spacer Bus Bar Contactor 7 7A Spacer Fuse 9A 9 Fuse Block One Contactor Arrangement Two Contactor Arrangement F, F Ref. Schematic Part Part No. Symbol Description Number Fan Contactors 7 M- 4 Contactor A Spacer Fan MMP s & Parts 8 MMP MMP- Cond. Fan MMP- Cond. Fan MMP- Cond. Fan MMP- Cond. Fan MMP MMP- Cond. Fan MMP- Cond. Fan MMP- Cond. Fan MMP- Cond. Fan MMP- Cond. Fan MMP MMP- Cond. Fan MMP- Cond. Fan MMP- Cond. Fan MMP- Cond. Fan MMP MMP- Cond. Fan MMP- Cond. Fan MMP- Cond. Fan MMP- Cond. Fan MMP- Cond. Fan 8B Link- MMP C Bus Bar 4994 Speedtrol Fusing 9 F, Fuse Block A F, Fuse- Speedtrol Fuse- Speedtrol Fuse- Speedtrol Fuse- Speedtrol B Fuse Cover/Puller C DIN Rail Adapter Contact Daikin Applied with model and serial number information so that the correct part(s) can be identified. 08V 0V 08V 0V 08V 0V 08V 0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 8

29 Diagrams: (4/ & Later), RCS Stand Alone unit w/ Standard Compressors PL5-0 RCS Stand Alone unit w/ a Digital Compressor T DCC PVM4 T6 F6C FA FB FC PL5-0 CS REC DS4 MMP4 MMP T TB8 VFD VFD TD TD T F F TD9 For information on RCS units WITH controls (Code = *E, *F), OR with no Temperature controls and floating point control (Code = YM), refer to form # The above diagrams show typical RCS Standalone Unit Control Box layouts and are to be used for reference only. Specific unit configuration may differ depending upon unit size and options selected. Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 9

30 Common Components: (4/ & Later) Sch. Part Part Qty. Sym. Description Number Digital Compressor Controller DCC Digital Compressor Controller Switches- Control CS, Switch- Control- Pole Code = A Switch- Control- Pole Code = A S Switch- System Receptacle REC Receptacle Relays R, Relay- Hi Pressure Reset R5 Relay- Safety R6 Relay- Safety R7 Relay- Safety R8 Relay- Safety R Relay- Inverter AFD Code 47=, R Relay- Safety R4 Relay- Safety R7 Relay- Inverter AFD Code 47=, R- R6 Relays- Compressor Contactor Staging Code = A 9947 /comp R70-90 Relays- Digital Compressor var. Time Delays TD, Time Delays, Compr. Lockout 6 TD9 Time Delay, Coil Splitter Temp. Controls TC Temperature Control- Fantrol TC4 Temperature Control- Fantrol Ground Fault Protection Code 7= YG, YC GFR4 Ground Fault Relay- SPDT GFS4 Ground Fault Sensor Phase Voltage Monitor Code 7= YP, YC PVM4 08/0/ (/6 & Earlier) 000 (/6 & Earlier) /0/ (/7 & Later) (/7 & Later) Socket, PVM (/7 & Later) Terminal Blocks TB,,5,6,8 Terminal Block var. TB5 Terminal Block Assy TB6 Terminal Block Assy Transformers T9 Transformer- 5/4VAC Part number is for one section. Quantity of sections varies with unit options. Ground Terminal is p/n Jumpers for TB are p/n (TBA:5), (TBB:4), (TBC:0,TBD:5 & TBE:0). Each relay uses a socket p/n For T,, Transformers see one page after next. 4 The replacement VFD Keypad is p/n For replacement VFD components, contact Daikin Applied with model and serial number information so that the correct part(s) can be identified. 6 Two Time Delay relays have been furnished. The most common is the NON-Adjustable type p/n The ADJUSTABLE version of this relay could also have been supplied: p/n Confirm which relay is required BEFORE ordering. Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 0

31 Common Components: (4/ & Later), Continued Sch. Part Part Qty. Sym. Description Number Speedtrol Inverters Code 47= AFD, 08/0V Inverter Code = **A, **B** Inverter Code = **Q** Inverter Code = **A, **B** Inverter Code = **Q** Speedtrol Line Reactors Code 47= LR, Line Reactor Code 09= Disconnect Switch Code = A, A DS4 Switch- Disconnect Switch- 00A Handle 940 Shaft Switch- 50A Handle 940 Mechanism Shaft Lugs Switch- 50A Handle Mechanism Shaft Lugs Switch- 400A Handle Mechanism Shaft Lugs Switch- 600A Handle Mechanism Shaft Lugs Plugs PL5-0 Plug- Pin /comp Power Block PB4 Main 75A A, 40A A Disconnects AND Power Blocks are sized according to various unit specifications. Check installed part to verify the correct size, or contact Daikin Applied with model and serial number information so that the required part(s) can be identified. This shaft is 4.5 OAL and is designed to be cut to length in the field. This shaft is 7. (8mm) OAL and is designed to be cut to length in the field. For a 9.69 (500mm) OAL use p/n Three Lugs are included with each p/n. Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page

32 Common Components: (4/ & Later), Continued T Transformer and Fusing Sch. Part Part Sym. Description Number Transformer- Main Control T Transformer ALL Sizes 000VA ALL Sizes 000VA ALL Sizes 000VA N/S Cover Kit, Terminal N/S Cover Kit, Fuseholder Fuses, T Transformer FUA, B Fuse- T Transformer, Primary FUC Fuse- T Transformer, Secondary N/S= Not shown on diagram. Contact Daikin Applied with model and serial number information to ensure that the correct part(s) are identified. 08V 0V T, Digital Compressor Transformers and Fusing Sch. Part Part Sym. Description Number FA, B Fuse- T Primary Fuse- T Primary Fuse- T Primary FC Fuse- T Secondary 4EHG766 T Transformer- 5/4V Transformer- 5/4V Transformer- 5/4V N/S Cover- Terminals N/S Cover/Fuseholder T Transformer- 5/4VAC N/S= Not shown on diagram. Contact Daikin Applied with model and serial number information to ensure that the correct part(s) are identified. 08V 0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page

33 Compressor MMP- 4 and Contactor M- 4: (4/ & Later) Unit Size 045D MMP Front Mtd. MMP Front Mtd. B Link Link B A Spacer Contactor Front Mtd. A Contactor MMP- 4 & M- 4 Contactor Link Detail 08/0/ MMP- 4 & M- 4 Contactor Link Detail Ref. Sch. Part Part No. Sym. Description Number Compressor Contactors & Parts M- 4 Contactor- Compressor 40A Contactor- Compressor A Contactor- Compressor 5A A Front Mtd. - NO- NC Compressor MMP s & Parts Front Mtd. - NO AND NC Front Mtd. - NO AND NC MMP- 4 Motor Protector- Compressor 6-45A Motor Protector- Compressor 8-40A Motor Protector- Compressor 4-0A Motor Protector- Compressor - 6A B Link Link N/S Busbar Busbar N/S Busbar Feeder Terminal Busbar Feeder Terminal N/S= Not Shown on Diagram. 08v 045 0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page

34 Compressor MMP- 4 and Contactor M- 4: (4/ & Later) Unit Size 050D MMP Front Mtd. Front Mtd. MMP Link B Front Mtd. A Contactor MMP Link B A Contactor Spacer MMP- 4 & M- 4 Contactor Link Detail 08/0V MMP- 4 & M- 4 Contactor Link Detail Front Mtd. B Link Contactor A Front Mtd. MMP- 4 & M- 4 Contactor Link Detail Ref. Sch. Part Part No. Sym. Description Number Compressor Contactors & Parts M- 4 Contactor- Compressor 65A Contactor- Compressor A Contactor- Compressor 5A A Front Mtd. - NO AND NC Compressor MMP s & Parts Front Mtd. - NO AND NC Front Mtd. - NO AND NC MMP- 4 Motor Protector- Compressor 45-6A Motor Protector- Compressor 7- A Motor Protector- Compressor 4-0A B Link Link Link N/S Busbar, position Busbar, position N/S Busbar Feeder Terminal Busbar Feeder Terminal N/S= Not Shown on Diagram. 08V 050 0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 4

35 Compressor MMP- 4 and Contactor M- 4: (4/ & Later) Unit Size 060D, 06D Front Mtd. MMP Front Mtd. MMP Link B Front Mtd. A Contactor Front Mtd. A B Link Contactor MMP- 4 & M- 4 Contactor Link Detail 08/0V MMP- 4 & M- 4 Contactor Link Detail 460/ 060, 06 Ref. Sch. Part Part No. Sym. Description Number Compressor Contactors & Parts M- 4 Contactor- Compressor 65A Contactor- Compressor 40A Contactor- Compressor 5A A Front Mtd. - NO AND NC Compressor MMP s & Parts Front Mtd. - NO AND NC MMP- 4 Motor Protector- Compressor 45-6A Motor Protector- Compressor - A Motor Protector- Compressor 8-5A B Link Link N/S Busbar, position N/S Busbar Feeder Terminal N/S= Not Shown on Diagram. 08V 0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 5

36 Compressor MMP- 6 and Contactor M- 6: (4/ & Later) Unit Size 070D, 07D MMP Front Mtd. Front Mtd. MMP Link B Front Mtd. A B Link A Spacer Contactor Contactor MMP- 6 & M- 6 Contactor Link Detail 08/0/ MMP- 6 & M- 6 Contactor Link Detail 070, 07 Ref. Sch. Part Part No. Sym. Description Number Compressor Contactors & Parts M- 6 Contactor- Compressor 40A Contactor- Compressor A Contactor- Compressor 5A A Front Mtd. - NO AND NC Compressor MMP s & Parts Front Mtd. - NO AND NC Front Mtd. - NO AND NC MMP- 6 Motor Protector- Compressor 6-45A Motor Protector- Compressor 8-40A Motor Protector- Compressor 4-0A Motor Protector- Compressor - 6A B Link Link N/S Busbar, position Busbar, position N/S Busbar Feeder Terminal Busbar Feeder Terminal N/S= Not Shown on Diagram. 08V 0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 6

37 Compressor MMP- 6 and Contactor M- 6: (4/ & Later) Unit Size 075D MMP Front Mtd. Front Mtd. MMP Link B Front Mtd. Contactor MMP Link B A Contactor Spacer MMP- 6 & M- 6 Contactor Link Detail 08/0V MMP- 6 & M- 6 Contactor Link Detail Front Mtd. B Link Contactor A Front Mtd. MMP- 6 & M- 6 Contactor Link Detail Ref. Sch. Part Part No. Sym. Description Number Compressor Contactors & Parts M- 6 Contactor- Compressor 65A Contactor- Compressor A Contactor- Compressor 5A A Front Mtd. - NO AND NC Compressor MMP s & Parts Front Mtd. - NO AND NC Front Mtd. - NO AND NC MMP- 6 Motor Protector- Compressor 45-6A Motor Protector- Compressor 7- A Motor Protector- Compressor 4-0A B Link Link Link N/S Busbar, position Busbar, position N/S Busbar Feeder Terminal Busbar Feeder Terminal N/S= Not Shown on Diagram. 08V 075 0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 7

38 Condenser Fan MMP,,,,, & Contactors M- 4: (4/ & Later) Fantrol Units (Code 47= ) MMP 8 Link 7B 7 Contactor Ref. Schematic Part Part No. Symbol Description Number Cond. Fan Contactors 7 M - 4 M - 4 Contactor- Cond. Fan Fan MMP s & Parts 7B Link- MMP MMP Motor Protector 9549 Motor Protector Motor Protector Motor Protector MMP Motor Protector 9549 Motor Protector Motor Protector Motor Protector MMP Motor Protector 9549 Motor Protector Motor Protector Motor Protector MMP4 Motor Protector 9549 Motor Protector Motor Protector Motor Protector MMP Motor Protector 9549 Motor Protector Motor Protector Motor Protector MMP Motor Protector 9549 Motor Protector Motor Protector Motor Protector MMP Motor Protector 9549 Motor Protector Motor Protector Motor Protector MMP4 Motor Protector 9549 Motor Protector Motor Protector Motor Protector N/S Bus Bar, Position Bus Bar, Position Bus Bar, 4 Position N/S Bus Bar Top Feed N/S= Not Shown on Diagram. 08V 0V 08V 0V 08V 0V Roofpak Standalone Condensing Unit; RCS Vintage D Rev. S 0/8 RPL / Page 8