Contents. Section 12: Sandwich Bodies

Transcription

1 Contents Warranty Information, erformance ssurance, and pplication Limitation Inside Cover Guide for using SUN Catalogs iii he SUN Code System for Ordering viii step-by-step explanation for using SUN s Code System to price and order cartridges, bodies and valve assembly packages. detailed list of SUN s Model Codes for cartridges is on page xi. SUN roduct Overview xii SUN Cartridge xii Standard or Custom Circuit Design xiii Line Mount odies xiii Sandwich and Subplate Mount odies xiii Valve ssemblies xiii Direct Motor Mount odies xiii Custom Valvepaks xiii echnical Information about SUN roducts xiv SUN Cartridges xiv Filtration xiv ressure and Flow Ratings erformance Data. xiv Line and Sandwich Mount odies, Material and ort Specification xv Sandwich and Subplate Interfaces xv esting xv Cartridge Service Instructions xv Service Kits xv rouble Shooting xv Cartridge Control Options xvi General urpose Controls xvi Special urpose Controls xvi Counterbalance Valves xvi Section 12: Sandwich odies Sandwich ody echnical ips ISO/CEO Interface atterns Mounting of ISO 3 Sandwiches Rotation Example of ISO 3 Sandwiches ssembly of ISO 3 Sandwiches Mounting of ISO 5 Sandwich odies Mounting of ISO 5, Sandwich odies European and U.S. Seal Kits Studkits for ISO 3 and ISO 5 Sandwich odies ISO 3 Studkits (Inch and Metric Standards) 12.4 ISO 5 Studkits (Inch and MetricStandards) Studrod Length Determination Chart Sandwich ody Locator his handy Locator lists all cataloged and some non-cataloged Sandwich odies and Subplates. Included are ISO/CEO Interface atterns, Function Descriptions and Function Symbols, with Cavities, ypical Cartridges used with each specific body and a stacking height for quick ordering. lso listed beneath each cartridge/body is a page number for location of more detailed information on each body. Sandwich ody Data ages ISO 3 Sandwich odies Relief Valves Sequence Valves Reducing Valves Reducing/Relieving Valves Counterbalance Valves ilot Operated Check Valves Flow Control Valves Check Valves Circuit Savers Subplates ar Manifolds ar Manifold Mounting rackets Cover lates ISO 5 Sandwich odies Relief Valves Sequence Valves Reducing Valves Reducing/Relieving Valves Counterbalance Valves ilot Operated Check Valves Flow Control Valves Check Valves Circuit Savers Subplates ar Manifolds ISO 5 x, y Sandwich odies Relief Valves Sequence Valves Reducing Valves Reducing/Relieving Valves Counterbalance Valves ilot Operated Check Valves Flow Control Valves Check Valves Circuit Savers Subplates ar Manifolds Cover lates ISO 7 Sandwich odies Relief Valves Sequence Valves Reducing Valves Reducing/Relieving Valves Counterbalance Valves ilot Operated Check Valves Flow Control Valves Check Valves Circuit Savers Subplates Continued US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan-96 i

2 Section 12: Sandwich odies (Continued) Sandwich ody Data ages (Continued) ISO 7 Sandwich odies ar Manifolds ISO 8 Sandwich odies Relief Valves Sequence Valves Reducing Valves Reducing/Relieving Valves Counterbalance Valves ilot Operated Check Valves Flow Control Valves Check Valves Circuit Savers Subplates ar Manifolds Section 14: General Information Direct Motor Mount odies List Danfoss, Eaton and Staffa odies Cartridge Cavities and Cavity ools Visit for current ooling infomation. Solenoid Valve Interfaces List of Manufacturers and Model Codes with ISO/CEO Interface drawings and measurements. Cartridge Control Kits List of Service Kit Numbers, Use, Description, and Instructional Notes Orifice ressure Drop Data Coil Information Current List of optional electrical connections for SUN s solenoid operated valve assemblies. Specifications, descriptions and illustrative material contained herein were as accurate as known at the time this publication was approved for printing. SUN Hydraulics Corporation reserves the right to discontinue models at any time, or change prices, specifications or designs without notice or incurring obligation. his catalog is published by SUN Hydraulics Corporation, 15 West University arkway, Sarasota, FL US. ll rights reserved. his book, or any part thereof, may not be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose without the express written permission of SUN Hydraulics Corporation SUN Hydraulics Corporation Sarasota, FL US rinted in the United States of merica Catalog # US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan-96 ii

3 GUIDE O HE SUN SNDWICH CLOG he Sandwich Catalog SUN offers the broadest and most comprehensive range of sandwich products in the ISO 3 to ISO 8 interface sizes of any manufacturer. ll sandwiches are available in a choice of materials; aluminum for 3 psi operation and ductile iron for 5 psi operation. Many sandwich products are also available in both standard and high capacity versions. he SUN Hydraulics Sandwich Catalog contains more than 3 pages of ISO 3, 5, 7, and 8 sandwich bodies, side-ported and rear-ported subplates, and one- to five-station bar manifolds. Sandwiches are available with single cavities, dual cavities, and multiple cavity variants to make unique circuit elements for mounting under standard directional control valves. roducts are cataloged by ISO/CEO interface pattern and function, with ISO 3 bodies appearing first, followed by ISO 5, ISO 5 with x and y ports (U.S. and European), ISO 7, and ISO 8 bodies. Within each ISO interface pattern, products are cataloged by function. ecause SUN s ISO 3 sandwich bodies are designed for multi-functional use, you will see the same three letter model code appear in different functional areas. o achieve multi-functional usage, SUN ISO 3 sandwiches do not conform to the ISO standard stacking height. See page 12.3 in the echnical ip Section for a more detailed explanation of ISO 3 sandwiches. echnical ips he echnical ip section, starting on page 12.3, provides detailed information on SUN sandwich products. he material presented in this section explains how to order and orient SUN sandwiches in a stack, and when and how to order seal plates. here is also information for ordering studkits for ISO 3 and 5 sandwiches. Sandwich Locator (See Figure 1) he Sandwich ody Locator on pages 12.7 through is the easiest way to locate a specific sandwich product in this catalog. he Locator groups products by function and presents the sandwich model code and stacking height, cavity configuration, and page number for every sandwich, subplate, and bar manifold in this catalog. Most sandwich model codes are preceded by a typical cartridge model code to present a full valve assembly. On the left side of each locator page is a pictorial description of a sandwich stack. he,,, and ports (with appropriate symbols) at the bottom of the page are connected with simulated lines to a directional valve (no center configuration shown) at the top of the page. he functional schematic renderings shown between the directional valve and,,, and ports realistically describe how a specific sandwich will function in a stack. Once a function is selected, available sandwich bodies are listed across the page under the five different ISO/CEO interface patterns. Simply note the model code for the sandwich you have selected and turn to the referenced page to see detailed information on that product. Figure 1 Sandwich Locator Five different ISO Interface atterns Locator ab Function Description Function Symbol Cavity Configuration Stacking Height Cartridge Model Code Sandwich ody Model Code age Location of ody in Sandwich Catalogue US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan-96 iii

4 GUIDE O HE SUN SNDWICH CLOG Figure 2 Sandwich Data age Ordering Information age Location ISO Interface attern identified in each page heading Function Symbol Function Description hysical Description of ody showing Cavity, LS Depth, O-rings, and other Information Sandwich ody Model Code merican 3rd ngle rojection Symbol Quick Reference abs with ISO Interface Size and Function Cartridge able showing ypical Cartridges used with odies on this page Cartridge Function Symbol Cartridge Model Code Cartridge Description age Location of Cartridge in Cartridge Catalog US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan-96 iv

5 GUIDE O HE SUN SNDWICH CLOG Sandwich Data ages (See Figure 2) Each sandwich data page presents information in a similar fashion. he function symbol(s) shown on the left part of the page replicate the same description found in the Locator, including the text description. o the right of the symbols, a complete physical description of the sandwich body is presented, including the cavity location and locating shoulder depth. (When the locating shoulder depth is subtracted from the maximum control extension dimension on a cartridge, you are able to calculate the stick-out length for the cartridge.) Convenient tabs on the outer margin of each page denote the ISO interface size and sandwich function for quick reference. Under the physical sandwich description is a chart providing the sandwich model codes for both aluminum and ductile iron versions, and port types and sizes if there are ports in the body. ISO standard interface dimensions can be found on page of the catalog. t the bottom of most sandwich data pages is a box titled ypical Cartridges used with odies shown above. his box contains cartridge model codes, cartridge function symbols and descriptive text for cartridges used with the sandwiches on a specific page. he key to matching cartridges to sandwich bodies is the SUN cavity. nytime the cavity configuration of a cartridge matches the cavity configuration of a body, you are guaranteed a physical fit. Most sandwich data pages show two sandwich bodies with identical cavities. However, sometimes the two bodies will have different cavities, especially in the case where a standard and high capacity sandwich body are shown on the same page. (o achieve a high capacity sandwich version, SUN often uses the next size larger cartridge.) On these pages, cartridge model codes are shown with an asterisk in the third position. o complete the model code, select the cartridge model that has the identical cavity as the sandwich being used. SUN Sandwich Valve ssemblies (See Figure 3) Some sandwich bodies are offered as complete, pre-configured valve assemblies. Sandwich Valve ssemblies typically include at least two different cartridges in the assembly and are designated by a nine-position model code. hese product data pages do not include a listing of typical cartridges used as they are complete circuit elements. he cartridges used in the assembly are described with complete model codes in the physical description of the assembly. If you need to change a control or adjustment range on cartridges, please contact your SUN distributor before making the change. Some sandwich valve assemblies include a solenoid valve. he model codes listed on these pages are incomplete, with an * in the eighth position of the model code. o complete the model code, the solenoid connector/voltage option must be selected from page at the back of the catalogue or page 5 of SUN s rice List. Once the appropriate option is selected, insert the option code in place of the * and add the option price to the assembly List rice. lease note that all solenoid operated valve assemblies are limited to 3 psi operation. Figure 3 Sandwich ssembly Data age Ordering Information age Location hysical Description of ssembly with ypical Cartridges Labeled Function Symbol Function Description Complete re-figured Sandwich Valve ssembly Model Code US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan-96 v

6 GUIDE O HE SUN SNDWICH CLOG General Information Section ll SUN catalogs contain a general information section for customer reference. his section includes: charted listing, by function, of direct motor mount bodies for Danfoss, Eaton, and Staffa motors. Cavity drawings for all SUN cavities in the catalog with model codes for cavity tooling. ISO standard interface dimensions with selected listing of field service kits for SUN cartridges. Orifice size pressure drop curves to be used when applying flow controls. listing of solenoid connector and voltage options. complete model code alphabetical index for all products in all SUN catalogs. he model code index is organized by Cartridge, Cartridge ccessories, ody (Line Mount and Sandwich), arts, and Valve ssembly ackages. directional valve manufacturers model codes. Figure 4 (op to bottom) SUN Cavity Drawing page, ISO/CEO standard interface page and solenoid connector and voltage options page. US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan-96 vi

7 NOES US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan-96 vii

8 Sandwich odies 12 US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan

9 ECHNICL IS Click Here for MOUNING and SSEML of SNDWICH ODIES echnical ips See roduct > echnical Information > echnical ips for Sun roducts

10 ECHNICL IS Click Here for MOUNING and SSEML of SNDWICH ODIES echnical ips See roduct > echnical Information > echnical ips for Sun roducts

11 ECHNICL IS Click Here for MOUNING and SSEML of SNDWICH ODIES echnical ips See roduct > echnical Information > echnical ips for Sun roducts

12 ECHNICL IS Click Here for MOUNING and SSEML of SNDWICH ODIES echnical ips See roduct > echnical Information > echnical ips for Sun roducts

13 NOES 12 US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan

14 ISO/NF SNDWICH OD LOCOR ND DUCILE IRON ll pages listed below refer to SUN s Sandwich ody Catalog. Full model codes are shown with typical cartridges. Other types of cartridges with identical cavity configuration can be used in place of typical cartridges shown. If a * is present in the sixth position of the full model code, the customer must specify the pressure range. ** Function ISO 3 / NF DO3 ISO 5 / NF DO5 ISO 5 / NF DO5 ISO 7 / NF DO7 ISO 8 / NF DO8 with and to to (High Capacity) to Externally Vented to N.O. Solenoid Vented to N.C. Solenoid Vented Out of Out of (High Capacity) to to (High Capacity) to FF Check to to to (High Capacity) to Externally Vented to N.O. Solenoid Vented to N.C. Solenoid Vented Continued on next page. Relief Valves Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt REC L*N CE 1.94 RGC L*N CK 1.96 RGC L*N CD 1.94 REC L*N CE/S1.94 RGC L*N CK/S1.96 RGC L*N CD/S1.94 g g g REC L*N F 1.75 RGC L*N C 1.94 RIC L*N CJ 1.99 RIC L*N CDO 3.44 REC L*N F/S1.75 RGC L*N C/S1.94 RIC L*N CJ/S 1.99 RIC L*N CDO/S 3.44 g g g g RVC L*N EC 1.75 RVE L*N C 2.44 RVE L*N JC 2.49 RVG L*N CKQ 2.74 RVG L*N HV 3.44 RVC L*N EC/S1.75 RVE L*N C/S2.44 RVE L*N JC/S 2.49 RVG L*N CKQ/S2.74 RVG L*N HV/S3.44 g g g g g RCO LN * 1.75 REO LN * 2.44 RFI LN * 2.74 RHI LN * 3.44 RCO LN */S*1.75 REO LN */S 2.44 RFI LN */S 2.74 RHI LN */S 3.44 g g g g RC LN * 1.75 RE LN * 2.44 RFJ LN * 2.74 RHJ LN * 2.74 RC LN */S 1.75 RE/S LN */S2.44 RFJ LN */S 2.74 RHJ LN */S 2.74 g g g g RIC L*N DK 2.74 RIC L*N I 3.44 RIC L*N DK/S 2.74 RIC L*N I/S 3.44 g g REC L*N F 1.75 RGC L*N C 1.94 RKC L*N DKV 3.49 RKC L*N IV 3.44 REC L*N F/S1.75 RGC L*N C/S1.94 RKC L*N DKV/S3.49 RKC L*N IV/S 3.44 g g g g REC L*N CF 1.94 RGC L*N CK 1.96 RGC L*N CD 1.94 REC L*N CF/S1.94 RGC L*N CK/S1.96 RGC L*N CD/S1.94 g g g REC L*N F 1.75 RGC L*N C 1.94 RGC L*N CJ 1.99 RIC L*N CDC 3.44 REC L*N F/S1.75 RGC L*N C/S1.94 RGC L*N CJ/S1.99 RIC L*N CDC/S 3.44 g g g g REC L*N F RGC L*N C RGC L*N CJ RGC L*N CKJ 1.96 REC L*N F2/S1.75 RGC L*N C2/S1.94 RGC L*N CJ2/S 2.49 RGC L*N CKJ/S1.96 g g g g REC L*N CH 1.49 REC L*N CH/S1.49 g REC L*N FC 1.75 RGC L*N CC 1.46 RGC L*N CJC 1.99 REC L*N FC/S1.75 RGC L*N CC/S1.46 RGC L*N CJC/S1.99 g g g RVC L*N EI 1.75 RVE L*N D 2.44 RVG L*N HE 3.44 RVC L*N EI/S 1.75 RVE L*N D/S2.44 RVG L*N HE/S3.44 g g g REU LN * 2.49 REU LN */S 2.49 g RE LN * 2.49 RE LN */S 2.49 g **Seal plate must be ordered separately. U.S. and European and available. * Incomplete model number. Cartridges included. Consult your SUN distributor for order information. hese bodies do not have a gage port. 12 US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan

15 ISO/NF SNDWICH OD LOCOR ND DUCILE IRON ll pages listed below refer to SUN s Sandwich ody Catalog. Full model codes are shown with typical cartridges. Other types of cartridges with identical cavity configuration can be used in place of typical cartridges shown. If a * is present in the sixth position of the full model code, the customer must specify the pressure range. ** Function ISO 3 / NF DO3 ISO 5 / NF DO5 ISO 5 / NF DO5 ISO 7 / NF DO7 ISO 8 / NF DO8 with and and to and to (High Capacity) to and to (Cross-ort) Relief Valves (Continued) Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt. 1 REC L*N CD 1.44 REC L*N CD/S 1.44 g REC L*N F 1.75 RGC L*N C 1.44 RGC L*N CJ 1.49 RGC L*N CK 2.74 RIC L*N CDZ 3.44 REC L*N F/S 1.75 RGC L*N C/S 1.44 RGC L*N CJ/S 1.49 RGC L*N CK/S 2.74 RIC L*N CDZ/S 3.44 g g g g g REC L*N CI 2.44 REC L*N CJ 2.49 REC L*N CK 1.96 RGC L*N CD 1.94 REC L*N CI/S 2.44 REC L*N CJ/S 2.49 REC L*N CK/S 1.96 RGC L*N CD/S 1.94 g g g g to and to (High Capacity) (Cross-ort) REC L*N F 1.75 RGC L*N C 2.44 RIC L*N CDW 3.44 REC L*N F/S 1.75 RGC L*N C/S 2.44 RIC L*N CDW/S 3.44 g g g to to (High Capacity) to (FF Check to to ) to to (High Capacity) to Externally Vented to N.O. Solenoid Vented to N.C. Solenoid Vented REC L*N CG 1.94 RGC L*N CK 1.96 RGC L*N CD 1.94 REC L*N CG/S 1.94 RGC L*N CK/S 1.96 RGC L*N CD/S1.94 g g g REC L*N F 1.75 RGC L*N C 1.94 RGC L*N CJ 1.99 RIC L*N CDD 3.44 REC L*N F/S 1.75 RGC L*N C/S 1.94 RGC L*N CJ/S 1.99 RIC L*N CDD/S 3.44 g g g g REC L*N F REC L*N F2/S 1.75 g REC L*N CH 1.49 REC L*N CH/S 1.49 g REC L*N FC 1.75 RGC L*N CC 1.46 RGC L*N CJC 1.99 REC L*N FC/S 1.75 RGC L*N CC/S 1.46 RGC L*N CJC/S 1.99 g g g RVC L*N EI 1.75 RVE L*N E 2.44 RVG L*N HF 3.44 RVC L*N EI/S 1.75 RVE L*N E/S 2.44 RVG L*N HF/S 3.44 g g g REU LN * 2.49 REU LN */S 2.49 g RE LN * 2.49 RE LN */S 2.49 g **Seal plate must be ordered separately. U.S. and European and available. * Incomplete model number. Cartridges included. Consult your SUN distributor for order information. hese bodies do not have a gage port. US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan

16 ISO/NF SNDWICH OD LOCOR ND DUCILE IRON ll pages listed below refer to SUN s Sandwich ody Catalog. Full model codes are shown with typical cartridges. Other types of cartridges with identical cavity configuration can be used in place of typical cartridges shown. If a * is present in the sixth position of the full model code, the customer must specify the pressure range. ** Function ISO 3 / NF DO3 ISO 5 / NF DO5 ISO 5 / NF DO5 ISO 7 / NF DO7 ISO 8 / NF DO8 with and In to In to Reverse FF Check Out of Reverse FF Check In to Reverse FF Check Out of Reverse FF Check On Drained to On Drained to (High Capacity) On Drained Externally On Drained to On Drained to (High Capacity) On Drained Externally On Drain to Reverse FF Check On Drained to On Drained to (High Capacity) Continued on next page. Sequence Valves Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt RSDC L*N EW 1.75 RSFC L*N W 2.44 RSFC L*N JW 2.49 RSHC L*N KW 2.74 RSHC L*N HW 3.44 RSDC L*N EW/S1.75 RSFC L*N W/S2.44 RSFC L*N JW/S2.49 RSHC L*N KW/S 2.74 RSHC L*N HW/S 3.44 g g g g g RSDC L*N E RSFC L*N RSFC L*N J RSHC L*N K RSHC L*N H RSDC L*N E4/S1.75 RSFC L*N 4/S 2.49 RSFC L*N J4/S 2.49 RSHC L*N K4/S 2.74 RSHC L*N H4/S 3.44 g g g g g RSDC L*N E RSFC L*N RSFC L*N J RSHC L*N K RSHC L*N H RSDC L*N E5/S1.75 RSFC L*N 5/S 2.49 RSFC L*N J5/S 2.49 RSHC L*N K6/S 2.74 RSHC L*N H6/S 3.44 g g g g g RSDC L*N E RSFC L*N RSFC L*N J RSHC L*N K RSDC L*N E5/S1.75 RSFC L*N 5/S 2.49 RSFC L*N J5/S 2.49 RSHC L*N K5/S 2.74 g g g g RSDC L*N E F L*N RSFC L*N J RSHC L*N K RSHC L*N H RSDC L*N E4/S1.75 F L*N 4/S 2.49 RSFC L*N J4/S 2.49 RSHC L*N K7/S 2.74 RSHC L*N H7/S 3.44 g g g g g Reducing Valves Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt D L*N E 1.75 F L*N 2.44 F L*N J 2.49 H L*N K 2.74 H L*N H 3.44 D L*N E/S1.75 F L*N /S 2.44 F L*N J/S 2.49 H L*N K/S 2.74 H L*N H/S 3.44 g g g g g H L*N WCC 3.94 J L*N HO 3.44 H L*N WCC/S3.94 J L*N HO/S 3.44 NO CLOGED g D L*N EQ 1.75 F L*N Q 2.49 H L*N KQ 2.74 J L*N HQ 3.44 D L*N EQ/S 1.75 F L*N Q/S2.49 H L*N KQ/S2.74 J L*N HQ/S 3.44 g g g g D L*N E 1.75 F L*N 1.94 F L*N J 2.49 H L*N K 2.74 H L*N HL 3.44 D L*N E/S1.75 F L*N /S1.94 F L*N J/S2.49 H L*N K/S2.74 H L*N HL/S 3.44 g g g g g J L*N H 3.44 J L*N H/S 3.44 g D L*N ED 1.75 F L*N F 2.49 H L*N KC 2.74 H L*N HG 3.44 D L*N ED/S1.75 F L*N F/S2.49 H L*N KC/S2.74 H L*N HG/S 3.44 g g g NO CLOGED D L*N E F L*N F L*N J H L*N K H L*N HK 3.44 D L*N E2/S1.75 F L*N 2/S 2.49 F L*N J2/S 2.49 H L*N K2/S 2.74 H L*N HK/S 3.44 g g g g g D L*N E 1.75 F L*N 1.94 F L*N J 2.49 H L*N K 2.74 H L*N HM 3.44 D L*N E/S1.75 F L*N /S1.94 F L*N J/S 2.49 H L*N K/S2.74 H L*N HM/S 3.44 g g g g g J L*N H 3.44 J L*N H/S 3.44 g **Seal plate must be ordered separately. U.S. and European and available. * Incomplete model number. Cartridges included. Consult your SUN distributor for order information. hese bodies do not have a gage port. 12 US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan

17 ISO/NF SNDWICH OD LOCOR ND DUCILE IRON ll pages listed below refer to SUN s Sandwich ody Catalog. Full model codes are shown with typical cartridges. Other types of cartridges with identical cavity configuration can be used in place of typical cartridges shown. If a * is present in the sixth position of the full model code, the customer must specify the pressure range. ** 12 Function ISO 3 / NF DO3 ISO 5 / NF DO5 ISO 5 / NF DO5 ISO 7 / NF DO7 ISO 8 / NF DO8 with and On Drained Externally On Drain to Reverse FF Check On and Drains to Opposite ort On and Drains to Opposite ort (High Capacity) On and Drains to Reverse FF Check On ank to Drained to On ank to Drained to (High Capacity) On ank to Vented Externally On ank to Drained Externally On ank to N.O. Solenoid on Drain On ank to N.C. Solenoid on Drain On ank to Drained to On ank to Drained to (High Capacity) On ank to Drained to Reverse FF Check Continued on next page. Reducing Valves (Continued) Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt D L*N ED 1.75 F L*N G 2.49 D L*N ED/S 1.75 F L*N G/S 2.49 g g D L*N E F L*N F L*N J H L*N KJ 2.74 H L*N HJ 3.44 D L*N E3/S1.75 F L*N 3/S 2.49 F L*N J3/S 2.49 H L*N KJ/S 2.74 H L*N HJ/S 3.44 g g g g g D L*N E 1.75 F L*N 1.94 F L*N J 2.49 H L*N K 2.74 H L*N HN 3.44 D L*N E/S 1.75 F L*N /S1.94 F L*N J/S 2.49 H L*N K/S2.74 H L*N HN/S3.44 g g g g g J L*N H 3.44 J L*N H/S 3.44 g D L*N E F L*N F L*N J D L*N E9/S 2.49 F L*N 9/S2.99 F L*N J9/S 2.99 NO CLOGED NO CLOGED NO CLOGED Reducing/Relieving Valves Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt D L*N E 1.75 F L*N 2.44 F L*N J 2.49 H L*N K 2.74 H L*N H 3.44 D L*N E/S 1.75 F L*N /S2.44 F L*N J/S 2.49 H L*N K/S2.74 H L*N H/S 3.44 g g g g g H L*N WCC 3.94 J L*N HO 3.44 H L*N WCC/S 3.94 J L*N HO/S 3.44 g g VD L*N M 1.75 VF L*N N 2.49 VF L*N NJ 2.49 VH L*N 3.44 VD L*N M/S 1.75 VF L*N N/S2.49 VF L*N NJ/S 2.49 VH L*N /S3.44 g g g g VD L*N M 1.75 VF L*N N 2.49 VF L*N NJ 2.49 VH L*N 3.44 VD L*N M/S 1.75 VF L*N N/S 2.49 VF L*N NJ/S 2.49 VH L*N /S 3.44 g g g g CG LN * 1.75 DG LN * 2.49 CG LN */S 1.75 DG LN */S 2.49 NO CLOGED g CH LN * 1.75 DH LN * 2.49 CH LN */S 1.75 DH LN */S 2.49 NO CLOGED g D L*N E 1.75 F L*N 1.94 F L*N J 2.49 H L*N K 2.74 H L*N HL 3.44 D L*N E/S 1.75 F L*N /S1.94 F L*N J/S 2.49 H L*N K/S2.74 H L*N HL/S 3.44 g g g g g J L*N H 3.44 J L*N H/S 3.44 g D L*N E F L*N F L*N J H L*N K H L*N HK 3.44 D L*N E2/S1.75 F L*N 2/S 2.49 F L*N J2/S 2.49 H L*N K2/S 2.74 H L*N HK/S3.44 g g g g g **Seal plate must be ordered separately. U.S. and European and available. * Incomplete model number. Cartridges included. Consult your SUN distributor for order information. hese bodies do not have a gage port. US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan

18 ISO/NF SNDWICH OD LOCOR ND DUCILE IRON ll pages listed below refer to SUN s Sandwich ody Catalog. Full model codes are shown with typical cartridges. Other types of cartridges with identical cavity configuration can be used in place of typical cartridges shown. If a * is present in the sixth position of the full model code, the customer must specify the pressure range. ** Function ISO 3 / NF DO3 ISO 5 / NF DO5 ISO 5 / NF DO5 ISO 7 / NF DO7 ISO 8 / NF DO8 With and On tank to Vented Externally Reverse FF Check On tank to Drained Externally Reverse FF Check On ank to Drained to On ank to Drained to (High Capacity) On ank to Drained to Reverse FF Check On ank to Vented Externally Reverse FF Check On ank to Drained Externally Reverse FF Check On and anks and Drains to Opposite ort On and anks and Drains to Opposite ort (High Capacity) On and anks and Drains to Reverse FF Check On ilot from On ilot from (High Capacity) On ilot from Vent to On No ilot ssist Continued on next page. Reducing/Relieving Valves (Continued) Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt VD L*N M VF L*N N VF L*N NJ VD L*N M2/S 2.44 VF L*N N2/S 2.99 VF L*N NJ2/S 2.99 NO CLOGED g g VD L*N M VF L*N N VF L*N NJ VD L*N M2/S 2.44 VF L*N N2/S 2.99 VF L*N NJ2/S 2.99 NO CLOGED g g D L*N E 1.75 F L*N 1.94 F L*N J 2.49 H L*N K 2.74 H L*N HM 3.44 D L*N E/S 1.75 F L*N /S 1.94 F L*N J/S 2.49 H L*N K/S 2.74 H L*N HM/S 3.44 g g g g g J L*N H 3.44 J L*N H/S 3.44 g D L*N E F L*N F L*N J H L*N KJ 2.74 H L*N HJ 3.44 D L*N E3/S 1.75 F L*N 3/S 2.49 H L*N J3/S 2.49 H L*N KJ/S 2.74 H L*N HJ/S 3.44 g g g g g VD L*N M VF L*N N VF L*N NJ VD L*N M3/S 2.44 VF L*N N3/S 2.99 VF L*N NJ3/S 2.99 NO CLOGED g g VD L*N M VF L*N N VF L*N NJ VD L*N M3/S 2.44 VF L*N N3/S 2.99 VF L*N NJ3/S 2.99 NO CLOGED g g D L*N E 1.75 F L*N 1.94 F L*N J 2.49 H L*N K 2.74 H L*N HN 3.44 D L*N E/S 1.75 F L*N /S 1.94 F L*N J/S 2.49 H L*N K/S 2.74 H L*N HN/S 3.44 g g g g g J L*N H 3.44 J L*N H/S 3.44 g D L*N E F L*N F L*N J D L*N E9/S 2.49 F L*N 9/S 2.99 F L*N J9/S 2.99 NO CLOGED NO CLOGED NO CLOGED Counterbalance Valves Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt CC LHN E 1.75 CE LHN 1.94 CE LHN J 2.49 CG LHN K 2.74 CG LHN HL 3.44 CC LHN E/S1.75 CE LHN /S1.94 CE LHN J/S2.49 CG LHN K/S2.74 CG LHN HL/S 3.44 g g g g g CI LHN H 3.44 CI LHN H/S 3.44 g CWC LHN M 1.75 CWE LHN N 2.49 CWE LHN NJ 2.49 CWG LHN NK 3.52 CWG LHN 3.44 CWC LHN M/S1.75 CWE LHN N/S 2.49 CWE LHN NJ/S2.49 CWG LHN NK/S3.52 CWG LHN /S 3.44 g g g g g RDD L*N F RDF L*N C RDF L*N CJ RDH L*N CK RDH L*N CD RDD L*N F4/S 1.75 RDF L*N C4/S 2.49 RDF L*N CJ4/S 2.49 RDH L*N CK4/S 2.74 RDH L*N CD4/S 3.44 g g g g g **Seal plate must be ordered separately. U.S. and European and available. * Incomplete model number. Cartridges included. Consult your SUN distributor for order information. hese bodies do not have a gage port. 12 US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan

19 ISO/NF SNDWICH OD LOCOR ND DUCILE IRON ll pages listed below refer to SUN s Sandwich ody Catalog. Full model codes are shown with typical cartridges. Other types of cartridges with identical cavity configuration can be used in place of typical cartridges shown. If a * is present in the sixth position of the full model code, the customer must specify the pressure range. ** 12 Function ISO 3 / NF DO3 ISO 5 / NF DO5 ISO 5 / NF DO5 ISO 7 / NF DO7 ISO 8 / NF DO8 with and On ilot from On ilot from (High Capacity) On ilot from Vent to On No pilot assist On and Cross iloted On and Cross iloted (High Capacity) On and Cross iloted Vents to Cushion Lock Circuit On and Counterbalance Valves (Continued) Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt CC LHN E 1.75 CE LHN 1.94 CE LHN J 2.49 CG LHN K 2.74 CG LHN HM 3.44 CC LHN E/S 1.75 CE LHN /S 1.94 CE LHN J/S 2.49 CG LHN K/S 2.74 CG LHN HM/S 3.44 g g g g g CI LHN H 3.44 CI LHN H/S 3.44 g CWC LHN M 1.75 CWE LHN N 2.49 CWE LHN NJ 2.49 CWG LHN NK 3.52 CWG LHN 3.44 CWC LHN M/S 1.75 CWE LHN N/S2.49 CWE LHN NJ/S 2.49 CWG LHN NK/S3.52 CWG LHN /S 3.44 g g g g g RDD L*N F RDF L*N C RDF L*N CJ RDH L*N CK RDD L*N F4/S 1.75 RDF L*N C5/S 2.49 RDF L*N CJ5/S 2.49 RDH L*N CK5/S 3.52 g g g g CC LHN E 1.75 CE LHN 1.94 CE LHN J 2.49 CG LHN K 2.74 CG LHN HN 3.44 CC LHN E/S 1.75 CE LHN /S 1.94 CE LHN J/S 2.49 CG LHN K/S 2.74 CG LHN HN/S 3.44 g g g g g CI LHN H 3.44 CI LHN H/S 3.44 g CWC LHN M 1.75 CWE LHN N 2.49 CWE LHN NJ 2.49 CWG LHN NK 3.52 CWG LHN 3.44 CWC LHN M/S 1.75 CWE LHN N/S 2.49 CWE LHN NJ/S 2.49 CWG LHN NK/S3.52 CWG LHN /S 3.44 g g g g g CC LHN E CE LHN CE LHN J CC LHN E8/S 2.49 CE LHN 8/S 2.99 CE LHN J8/S 2.99 g g g On ilot from On ilot from (High Capacity) On ilot from Vent to On ilot from On ilot from (High Capacity) Continued on next page. ilot Operated Check Valves Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt CKC CN E 1.75 CKE CN 1.94 CKE CN J 2.49 CKG CN K 2.74 CKG CN HL 3.44 CKC CN E/S 1.75 CKE CN /S 1.94 CKE CN J/S 2.49 CKG CN K/S2.74 CKG CN HL/S 3.44 g g g g g CKI CN H 3.44 CKI CN H/S 3.44 g CVCV CN M 1.75 CVEV CN N 2.49 CVEV CN NJ 2.49 CVGV CN NK 3.52 CVGV CN 3.44 CVCV CN M/S1.75 CVEV CN N/S 2.49 CVEV CN NJ/S 2.49 CVGV CN NK/S 3.52 CVGV CN /S 3.44 g g g g g CKC CN E 1.75 CKE CN 1.94 CKE CN J 2.49 CKG CN K 2.74 CKG CN HM 3.44 CKC CN E/S 1.75 CKE CN /S1.94 CKE CN J/S 2.49 CKG CN K/S2.74 CKG CN HM/S 3.44 g g g g g CKI CN H 3.44 CKI CN H/S 3.44 g **Seal plate must be ordered separately. U.S. and European and available. * Incomplete model number. Cartridges included. Consult your SUN distributor for order information. hese bodies do not have a gage port. US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan

20 ISO/NF SNDWICH OD LOCOR ND DUCILE IRON ll pages listed below refer to SUN s Sandwich ody Catalog. Full model codes are shown with typical cartridges. Other types of cartridges with identical cavity configuration can be used in place of typical cartridges shown. If a * is present in the sixth position of the full model code, the customer must specify the pressure range. ** Function ISO 3 / NF DO3 ISO 5 / NF DO5 ISO 5 / NF DO5 ISO 7 / NF DO7 ISO 8 / NF DO8 with and On ilot from Vent to On and Cross iloted On and Cross iloted (High Capacity) On and Cross iloted Vents to Meter In Meter In (High Capacity) leed Off to riority Flow on Meter In Meter In (High Capacity) Meter Out Meter Out (High Capacity) leed Off to leed Off to (High Capacity) Continued on next page. ilot Operated Check Valves (Continued) Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt CVCV CN M 1.75 CVEV CN N 2.49 CVEV CN NJ 2.49 CVGV CN NK 3.52 CVGV CN 3.44 CVCV CN M/S 1.75 CVEV CN N/S 2.49 CVEV CN NJ/S 2.49 CVGV CN NK/S 3.52 CVGV CN /S 3.44 g g g g g CKC CN E 1.75 CKE CN 1.94 CKE CN J 2.49 CKG CN K 2.74 CKG CN HN 3.44 CKC CN E/S1.75 CKE CN /S1.94 CKE CN J/S 2.49 CKG CN K/S2.74 CKG CN HN/S 3.44 g g g g g CKI CN H 3.44 CKI CN H/S 3.44 g CVCV CN M 1.75 CVEV CN N 2.49 CVEV CN NJ 2.49 CVGV CN NK 3.52 CVGV CN 3.44 CVCV CN M/S1.75 CVEV CN N/S2.49 CVEV CN NJ/S 2.49 CVGV CN NK/S 3.52 CVGV CN /S 3.44 g g g g g Flow Control Valves Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt NFCC LCN G 1.75 NFDC LN D 2.44 NFDC LN DJ 2.44 NFEC LEN DK 2.74 NFEC LEN I 3.44 NFCC LCN G/S1.75 NFDC LN D/S2.44 NFDC LN DJ/S 2.44 NFEC LEN DK/S 2.74 NFEC LEN I/S 3.44 g g g g g NFDC LN GO 1.75 NFEC LEN DJO 2.49 NFFC LGN DKO 3.49 NFFC LGN IO 3.44 NFDC LN GO/S1.75 NFEC LEN DJO/S 2.49 NFFC LGN DKO/S 3.49 NFFC LGN IO/S 3.44 g g g g NCC LN GQ 1.75 NCE LCN DQ 1.94 NCF LCN CDO 3.44 NCC LN GQ/S1.75 NCE LCN DQ/S1.94 NCF LCN CDO/S 3.44 g g g FRC LN WN 1.75 FRD LN DJN 2.49 FRC LN WN/S1.75 FRD LN DJN/S 2.49 g g NCC LCN G 1.75 NCE LCN D 1.99 NCE LCN DJ 2.49 NCF LCN DKC 2.74 NCF LCN IC 3.44 NCC LCN G/S1.75 NCE LCN D/S1.99 NCE LCN DJ/S2.49 NCF LCN DKC/S 2.74 NCF LCN IC/S 3.44 g g g g g NCE LCN GD 1.75 NCF LEN DJC 2.49 NCG LCN DKG 3.52 NCG LCN IG 3.44 NCE LCN GD/S1.75 NCF LEN DJC/S 2.49 NCG LCN DKG/S3.52 NCG LCN IG/S 3.44 g g g g NCC LCN G 1.75 NCE LCN D 1.99 NCE LCN DJ 2.49 NCF LCN DK 2.74 NCF LCN I 3.44 NCC LCN G/S1.75 NCE LCN D/S1.99 NCE LCN DJ/S2.49 NCF LCN DK/S 2.74 NCF LCN I/S 3.44 g g g g g NCE LCN GD 1.75 NCF LCN DJD 2.49 NCG LCN DKE 3.52 NCG LCN IE 3.44 NCE LCN GD/S1.75 NCF LCN DJD/S 2.49 NCG LCN DKE/S3.52 NCG LCN IE/S 3.44 g g g g NCC LCN GW 1.75 NCE LCN DC 1.49 NCF LCN CDC 3.44 NCC LCN GW/S1.75 NCE LCN DC/S1.49 NCF LCN CDC/S 3.44 g g g NCE LCN GE 1.75 NCE LCN GE/S1.75 g **Seal plate must be ordered separately. U.S. and European and available. hese bodies do not have a gage port. 12 US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan

21 ISO/NF SNDWICH OD LOCOR ND DUCILE IRON ll pages listed below refer to SUN s Sandwich ody Catalog. Full model codes are shown with typical cartridges. Other types of cartridges with identical cavity configuration can be used in place of typical cartridges shown. If a * is present in the sixth position of the full model code, the customer must specify the pressure range. ** 12 Function ISO 3 / NF DO3 ISO 5 / NF DO5 ISO 5 / NF DO5 ISO 7 / NF DO7 ISO 8 / NF DO8 with and riority Flow On, ypass to Reverse FF Check Meter In Meter In (High Capacity) Meter Out Meter Out (High Capacity) leed Off to leed Off to (High Capacity) riority Flow On, ypass to Reverse FF Check Meter In and Meter In and (High Capacity) Meter Out and Meter Out and (High Capacity) leed Off and to leed Off and to (High Capacity) leed Off to and to Continued on next page. Flow Control Valves (Continued) Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt. 2 FRD N WH 2.49 FRD N WH/S 2.49 g NCC LCN G 1.75 NCE LCN D 1.99 NCE LCN DJ 2.49 NCF LCN DKD 2.74 NCF LCN ID 3.44 NCC LCN G/S1.75 NCE LCN D/S1.99 NCE LCN DJ/S 2.49 NCF LCN DKD/S 2.74 NCF LCN ID/S 3.44 g g g g g NCE LCN GD 1.75 NCF LCN DJE 2.49 NCG LCN DKI 3.49 NCG LCN IH 3.44 NCE LCN GD/S 1.75 NCF LCN DJE/S 2.49 NCG LCN DKI/S 3.49 NCG LCN IH/S 3.44 g g g g NCC LCN G 1.75 NCE LCN D 1.99 NCE LCN DJ 2.49 NCF LCN DK 2.74 NCF LCN I 3.44 NCC LCN G/S1.75 NCE LCN D/S1.99 NCE LCN DJ/S 2.49 NCF LCN DK/S 2.74 NCF LCN I/S 3.44 g g g g g NCE LCN GD 1.75 NCF LCN DJF 2.49 NCG LCN DKF 3.49 NCG LCN IF 3.44 NCE LCN GD/S1.75 NCF LCN DJF/S 2.49 NCG LCN DKF/S 3.49 NCG LCN IF/S 3.44 g g g g NCC LCN GW 1.75 NCE LCN DC 1.49 NCF LCN CDD 3.44 NCC LCN GW/S1.75 NCE LCN DC/S1.49 NCF LCN CDD/S 3.44 g g g NCE LCN GE 1.75 NCE LCN GE/S 1.75 g FRD N WHZ 2.49 FRD N WHZ/S 2.49 g NCC LCN G 1.75 NCE LCN D 1.99 NCE LCN DJ 2.49 NCF LCN DKZ 2.74 NCF LCN I 3.44 NCC LCN G/S 1.75 NCE LCN D/S1.99 NCE LCN DJ/S 2.49 NCF LCN DKZ/S 2.74 NCF LCN I/S 3.44 g g g g g NCE LCN GZ 1.75 NCF LCN DJZ 2.99 NCG LCN DKU 3.52 NCG LCN IZ 3.44 NCE LCN GZ/S 1.75 NCF LCN DJZ/S 2.99 NCG LCN DKU/S 3.52 NCG LCN IZ/S 3.44 g g g g NCC LCN G 1.75 NCE LCN D 1.99 NCE LCN DJ 2.49 NCF LCN DK 2.74 NCF LCN IW 3.44 NCC LCN G/S 1.75 NCE LCN D/S1.99 NCE LCN DJ/S 2.49 NCF LCN DK/S 2.74 NCF LCN IW/S 3.44 g g g g g NCE LCN GZ 1.75 NCF LCN DJZ 2.99 NCG LCN DKW 3.52 NCG LCN I 3.44 NCE LCN GZ/S 1.75 NCF LCN DJZ/S 2.99 NCG LCN DKW/S3.52 NCG LCN I/S 3.44 g g g g NCC LCN G 1.75 NCE LCN D 1.44 NCE LCN DJ 1.49 NCC LCN G/S 1.75 NCE LCN D/S1.44 NCE LCN DJ/S 1.49 g g g NCE LCN GF 1.75 NCE LCN GF/S 1.75 g NFCC LCN GS 1.24 NFCC LCN DS 1.24 NFCC LCN DJS 1.24 NFCC LCN GS/S 1.24 NFCC LCN DS/S 1.24 NFCC LCN DJS/S 1.24 g g g **Seal plate must be ordered separately. U.S. and European and available. hese bodies do not have a gage port. US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan

22 ISO/NF SNDWICH OD LOCOR ND DUCILE IRON ll pages listed below refer to SUN s Sandwich ody Catalog. Full model codes are shown with typical cartridges. Other types of cartridges with identical cavity configuration can be used in place of typical cartridges shown. If a * is present in the sixth position of the full model code, the customer must specify the pressure range. ** Function ISO 3 / NF DO3 ISO 5 / NF DO5 ISO 5 / NF DO5 ISO 7 / NF DO7 ISO 8 / NF DO8 With and Meter Out Meter Out (High Capacity) On On (High Capacity) to On Free Flow Out of Valve On Free Flow Out of Valve (High Capacity) On Free Flow Into Valve On Free Flow Into Valve (High Capacity) to to (High Capacity) to On Free Flow Out of Valve On Free Flow Out of Valve (High Capacity) Continued on next page. Flow Control Relief Valves (Continued) Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt NCC LCN G 1.75 NCE LCN D 1.94 NCE LCN DJ 2.49 NCF LCN DK 2.74 NCF LCN I 3.44 NCC LCN G/S1.75 NCE LCN D/S 1.94 NCE LCN DJ/S 2.49 NCF LCN DK/S2.74 NCF LCN I/S 3.44 g g g g g NCE LCN GO 1.75 NCG LCN DKV 3.49 NCG LCN IV 3.44 NCE LCN GO/S1.75 NCG LCN DKV/S3.49 NCG LCN IV/S3.44 g g g Check Valves (use only C* check valves) Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt CD CN GD 1.75 CF CN D 2.44 CF CN DJ 2.49 CH CN DK 2.74 CH CN I 3.44 CD CN GD/S1.75 CF CN D/S 2.44 CF CN DJ/S 2.49 CH CN DK/S2.74 CH CN I/S3.44 g g g g g CF CN GDO 1.75 CH CN DJO 2.49 CJ CN IO 3.44 CF CN GDO/S1.75 CH CN DJO/S2.49 CJ CN IO/S3.44 g g g CD N GDQ 1.75 CD N GDQ/S 1.75 g CD CN GD 1.75 CF CN DK 1.99 CF CN DJK 2.49 CH CN DKC 2.74 CH CN IC 3.44 CD CN GD/S1.75 CF CN DK/S 1.99 CF CN DJK/S 2.49 CH CN DKC/S2.74 CH CN IC/S3.44 g g g g g CF CN GDD 1.75 CH CN DJC 2.49 CJ CN DKG 3.52 CJ CN IG 3.44 CF CN GDD/S1.75 CH CN DJC/S2.49 CJ CN DKG/S3.52 CJ CN IG/S3.44 g g g g CD CN GD 1.75 CF CN DJ 1.99 CHF CN DJJ 2.49 CH CN DK 2.74 CH CN I 3.44 CD CN GD/S1.75 CF CN DJ/S 1.99 CHF CN DJJ/S 2.49 CH CN DK/S2.74 CH CN I/S3.44 g g g g g CF CN GDD 1.75 CH CN DJD 2.49 CJ CN DKE 3.52 CJ CN IE 3.44 CF CN GDD/S1.75 CH CN DJD/S2.49 CJ CN DKE/S3.52 CJ CN IE/S 3.44 g g g g CD N GDW 1.75 CD N GDW/S 1.75 g CF N GDE 1.75 CH N DM 2.99 CH N DJM 2.99 CJ N DKM 3.52 CJ N IM 3.44 CF N GDE/S 1.75 CH N DM/S2.99 CH N DJM/S2.99 CJ N DKM/S3.52 CJ N IM/S3.44 g NO CLOGED NO CLOGED NO CLOGED NO CLOGED CD N GS 1.24 CD N DS 1.24 CD N DJS 1.24 CD N GS/S 1.24 CD N DS/S 1.24 CD N DJS/S1.24 g g g CD CN GD 1.75 CF CN DJ 1.99 CF CN DJJ 2.49 CH CN DKD 2.74 CH CN ID 3.44 CD CN GD/S1.75 CF CN DJ/S 1.99 CF CN DJJ/S 2.49 CH CN DKD/S2.74 CH CN ID/S3.44 g g g g g CF CN GDD 1.75 CH CN DJE 2.49 CJ CN DKI 3.49 CJ CN IH 3.44 CF CN GDD/S1.75 CH CN DJE/S2.49 CJ CN DKI/S 3.49 CJ CN IH/S3.44 g g g g **Seal plate must be ordered separately. U.S. and European and available. hese bodies do not have a gage port. 12 US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan

23 ISO/NF SNDWICH OD LOCOR ND DUCILE IRON ll pages listed below refer to SUN s Sandwich ody Catalog. Full model codes are shown with typical cartridges. Other types of cartridges with identical cavity configuration can be used in place of typical cartridges shown. If a * is present in the sixth position of the full model code, the customer must specify the pressure range. ** Function ISO 3 / NF DO3 ISO 5 / NF DO5 ISO 5 / NF DO5 ISO 7 / NF DO7 ISO 8 / NF DO8 with and 12 On Free Flow Into Valve On Free Flow Into Valve (High Capacity) to to (High Capacity) to to (For Regenerative Circuits) On and Free Flow Out of Valve On and Free Flow Out of Valve (High Capacity) On and Free Flow Into Valve On and Free Flow Into Valve (High Capacity) to and to and (High Capacity) On On (High Capacity) Check Valves use C* check valves (Continued) Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack Cartridge Stack ody Hgt. ody Hgt. ody Hgt. ody Hgt. ody Hgt CD CN GD 1.75 CF CN DK 1.99 CF CN DJK 2.49 CH CN DK 2.74 CH CN I 3.44 CD CN GD/S 1.75 CF CN DK/S 1.99 CF CN DJK/S 2.49 CH CN DK/S 2.74 CH CN I/S 3.44 g g g g g CF CN GDD 1.75 CH CN DJF 2.49 CJ CN DKF 3.49 CJ CN IF 3.44 CF CN GDD/S 1.75 CH CN DJF/S 2.49 CJ CN DKF/S 3.49 CJ CN IF/S 3.44 g g g g CD N GDW 1.75 CD N GDW/S 1.75 g CF N GDE 1.75 CH N DM 2.99 CH N DJM 2.99 CJ N DKN 3.52 CJ N IN 3.44 CF N GDE/S 1.75 CH N DM/S 2.99 CH N DJM/S 2.99 CJ N DKN/S 3.52 CJ N IN/S 3.44 g NO CLOGED NO CLOGED NO CLOGED NO CLOGED CD N GS 1.75 CD N DS 1.24 CD N DJS 1.24 CD N GS/S 1.75 CD N DS/S 1.24 CD N DJS/S 1.24 g g g DCK CN 2.7 DCK CN /S 2.7 g CD CN GD 1.75 CF CN DL 1.99 CF CN DJL 2.49 CH CN DKZ 2.74 CH CN I 3.44 CD CN GD/S 1.75 CF CN DL/S 1.99 CF CN DJL/S 2.49 CH CN DKZ/S 2.74 CH CN I/S 3.44 g g g g g CF CN GDZ 1.75 CH CN DJZ 2.99 CJ CN DKU 3.52 CJ CN IZ 3.44 CF CN GDZ/S 1.75 CH CN DJZ/S 2.99 CJ CN DKU/S 3.52 CJ CN IZ/S 3.44 g g g g CD CN GD 1.75 CF CN DL 1.99 CF CN DJL 2.49 CH CN DK 2.74 CH CN IW 3.44 CD CN GD/S 1.75 CF CN DL/S 1.99 CF CN DJL/S 2.49 CH CN DK/S 2.74 CH CN IW/S3.44 g g g g g CF CN GDZ 1.75 CH CN DJZ 2.99 CJ CN DKW 3.52 CJ CN I 3.44 CF CN GDZ/S 1.75 CH CN DJZ/S 2.99 CJ CN DKW/S 3.52 CJ CN I/S 3.44 g g g g CD N GD 1.75 CF N DW 2.49 CF N DJW 2.49 CF N DK 1.96 CF N CD 1.94 CD N GD/S 1.75 CF N DW/S 2.49 CF N DJW/S 2.49 CF N DK/S 1.96 CF N CD/S1.94 g g g NO CLOGED g CF N GDF 1.75 CH N DR 2.99 CH N DJR 2.99 CJ N DKR 3.52 CH N CDV 3.44 CF N GDF/S 1.75 CH N DR/S 2.99 CH N DJR/S 2.99 CJ N DKR/S 3.52 CH N CDV\S 3.44 g NO CLOGED NO CLOGED NO CLOGED g CD CN GD 1.75 CF CN D 1.94 CF CN DJ 2.49 CH CN DK 2.74 CH CN I 3.44 CD CN GD/S 1.75 CF CN D/S 1.94 CF CN DJ/S 2.49 CH CN DK/S 2.74 CH CN I/S 3.44 g g g g g CF CN GDO 1.75 CJ CN IV 3.44 CF CN GDO/S 1.75 CJ CN IV/S 3.44 g g **Seal plate must be ordered separately. U.S. and European and available. ll bodies on this page do not have gage port. US Sandwich ody Catalog 5/94 # CD # Rev. 1-Jan