Section 6 Pump Manifolds
|
|
|
- Isabella Charleen Johns
- 6 years ago
- Views:
Transcription
1 Industrial Hydraulics Electric Drives and Controls inear Motion and Assembly Technologies neumatics Service Automation Mobile Hydraulics Section 6 ump Manifolds RA /07.04 The Drive & Control Company 73
2 74/148 Bosch Rexroth Corp. Industrial Hydraulics Section 6: ump Manifolds RA /07.04 Section 6 Index Description age ump Relief Block ump Unloading Block ump Manifold with Unloading Control ump Manifold ressure Relief Block with Unloading... 82
3 RA /07.04 Section 6: ump Manifolds Industrial Hydraulics Bosch Rexroth Corp. 75/148 ump Manifolds ressure Relief Block RVB / Flange Size = 3/4 = 1 = 1-1/4 = 1-1/2 1 ressure Range Standard ressure ine (Code 61) High ressure ine (Code 62) (Available in ductile iron only) Revision Material Aluminum 6061 T6, 3000 psi Ductile Iron , 5000 psi = N = H See page 76 for dimensional information. 1) 1-1/2 Flange is only available in H (Code 62) version 2) Blackening = = A = D Sealing Material M = Buna V = Viton Threaded ort Style 01 = BS Threaded orts 07 = SAE Flanged 12 = SAE O-Ring ort Size 12 = 16 = for ort Size see chart on age 2 20 = 3/4 = 1 = For SAE Flanged port 1-1/4 = indentical to pressure port size Omit = SAE & BS Model G3 T2 G4 ressure relief valve must be ordered separately. Assemblies include mounting bolts, O-rings, and plugs for G ports and T2 Flanged Model G3 T2 Assemblies include O-rings and plugs for G ports and T2 G4 ressure relief valve must be ordered separately.
4 76/148 Bosch Rexroth Corp. Industrial Hydraulics Section 6: ump Manifolds RA /07.04 ump Manifolds ressure Relief Block N H F G4 T2 M I A C J D F B K E G F G3 G3 G4 T O H T2 Schematic Symbol Relief,T2,, Dimension A B C D E F G H I J K M 3 N 1 O 1 Valve 2 G3 1,G4 1 RVB3/4N DBDS10 SAE-8 SAE-4 SAE-12 RVB3/4N DBDS10 1/2 BS 1/4 BS 3/4 BS RVB3/4N DBDS10 SAE-8 SAE-4 RVB1N DBDS10 SAE-12 SAE-4 SAE-16 RVB1N DBDS10 3/4 BS 1/4 BS 1 BS RVB1N DBDS10 SAE-12 SAE-4 RVB1-1/4N DBDS10 SAE-12 SAE-4 SAE-20 RVB1-1/4N DBDS10 3/4 BS 1/4 BS 1-1/4 BS RVB1-1/4N DBDS10 SAE-12 SAE-4 RVB3/4H DBDS10 SAE-8 SAE-4 RVB3/4H DBDS10 1/2 BS 1/4 BS 3/4 BS RVB3/4H DBDS10 SAE-8 SAE-4 RVB1H DBDS10 SAE-12 SAE-4 SAE-16 RVB1H DBDS10 3/4 BS 1/4 BS 1 BS RVB1H DBDS10 SAE-12 SAE-4 RVB1-1/4H DBDS20 SAE-12 SAE-4 SAE-20 RVB1-1/4H DBDS20 3/4 BS 1/4 BS 1-1/4 BS RVB1-1/4H DBDS20 SAE-12 SAE-4 RVB1-1/2H DBDS30 SAE-24 SAE-4 1) orts G3 and G4 available only on RVB1 for use with AA10VSO71 Series 31 2) ressure Relief Valve must be ordered separately 3) Dimension M shown for S Type adjustment 4) 1-1/2 Flange is only available in H (Code 62) version
5 RA /07.04 Section 6: ump Manifolds Industrial Hydraulics Bosch Rexroth Corp. 77/148 ump Manifolds ressure Relief Block Orientation for AA10VSO71 Series 31 ump RVB1 Orientation for Relief Blocks: RVB3/4... RVB1... RVB1-1/4... RVB1-1/2...
6 78/148 Bosch Rexroth Corp. Industrial Hydraulics Section 6: ump Manifolds RA /07.04 ump Manifolds Unloading RVB / Flange Size = 1-1/2 = 2 ressure Range Standard ressure ine (Code 61) = N High ressure ine (Code 62) = H ogic Size = 25 = 32 Revision = D = ort Style 07 = SAE Flanged Material Ductile Iron , 5000 psi (4) 5/16-18 x.75 D Q M GA K O N J 8 A B C I Y Y T 9 H T * Components must be ordered separately GA ogic, T GA B F G E D T A Size /2 SAE 3000 SI 1-1/2 SAE 3000 SI SAE-6 (9/16-18UNF) (Code 61 Flange) (Code 61 Flange) Size /2 SAE 6000 SI 1-1/2 SAE 3000 SI SAE-6 (9/16-18UNF) (Code 62 Flange) (Code 61 Flange) Size 32 2 SAE 3000 SI 2 SAE 3000 SI SAE-6 (9/16-18UNF) (Code 61 Flange) (Code 61 Flange) Size 32 2 SAE 6000 SI 2 SAE 3000 SI SAE-6 (9/16-18UNF) (Code 62 Flange) (Code 61 Flange) ogic A B C D E F G H I J K M N O Q R S Size Size ) Blackening
7 RA /07.04 Section 6: ump Manifolds Industrial Hydraulics Bosch Rexroth Corp. 79/148 ump Manifold Size 18 through 100, AA10VSO with Unloading Control SB A10 / D ump Revision Material Ductile Iron , 5000 psi 1) Blackening = A10 = = D DR-R = DR- = DFR-R = DFR- = Threaded orts 12 = SAE Item art No. Quantity Description 1 US Manifold Block 2 RR M6x100 SHCS D A3C 3 US H50N-S lug HOHE/SH 4 US STR THRD E90 4-4S SAE 37 UA20 5 US O-RG Sz NBR 70SH WAS US O-RG Sz NBR 70SH WAS 0090 Item art No. Quantity Description 7 RR Setscrew M D427 8 US SHCS ASTM A574 9 RR Jet 1.0 M47 MS RN US SHCS /4 ASTM A US Socket Setscrew 1/4-20 UNC
8 80/148 Bosch Rexroth Corp. Industrial Hydraulics Section 6: ump Manifolds RA /07.04 ump Manifold Size 18 through 100, AA10VSO with Unloading Control For information on variable displacement pumps please refer to Rexroth ump and Motor Catalog A2 T B A1 TECH. OS. #3 TECH. OS. #2 Y 6 4 TECH. OS. #1 Optional ZBD A T B 4WE6 S 1
9 RA /07.04 Section 6: ump Manifolds Industrial Hydraulics Bosch Rexroth Corp. 81/148 ump Manifold ressure Relief Block with Unloading RVBU / Flange Size () = 3/4 = 1 = 1-1/4 ressure Range Standard ressure ine (Code 61) High ressure ine (Code 62) (Available in Ducile Iron Only) Revision Material Aluminum 6061-T6, 3000 psi Ductile Iron , 5000 psi See pages 83 for dimensional information. 1) Blackening = N = H = = A = D Sealing Material M = Buna V = Viton Threaded ort Style 12 = SAE 01 = BS 07 = SAE Flanged ort Size () 12 = 16 = SAE orts 20 = 3/4 = 1 = BS orts 1-1/4 = Omit = SAE Flanged ort identical to press. port size () (Sandwich late Design) SAE & BS Model Assemblies include mounting bolts, o-rings, and plugs for G ports and T2. ressure relief valve and directional valve ( B solenoid only). Must be ordered separately. Flanged Model Assemblies include o-rings, and plugs for G ports and T2. ressure relief valve and directional valve ( B solenoid only). Mounting flange, and bolts must be order separately.
10 82/148 Bosch Rexroth Corp. Industrial Hydraulics Section 6: ump Manifolds RA /07.04 ump Manifold ressure Relief Block with Unloading H T T2 M I J D A F C B K E G SAE & BS Model T2 Optional lug/orifice T H Schematic Symbol DO3 attern A B T Flanged Model See page 83 for dimensional information.
11 RA /07.04 Section 6: ump Manifolds Industrial Hydraulics Bosch Rexroth Corp. 83/148 ump Manifold ressure Relief Block with Unloading Relief,, Dimension A B C D E F G H I J K M 3 N 1 O 1,T2 Valve 2 G3 1,G4 1 RVBU3/4N 12 SAE-8 SAE-4 SAE-12 RVBU3/4N DBDS10 1/2 BS 1/4 BS 3/4 BS RVBU3/4N 07 SAE-8 SAE-4 RVBU1N SAE-12 SAE-4 SAE-16 RVBU1N DBDS10 3/4 BS 1/4 BS 1 BS RVBU1N SAE-12 SAE-4 RVBU1-1/4N SAE-12 SAE-4 SAE-20 RVBU1-1/4N DBDS10 3/4 BS 1/4 BS 1-1/4 BS RVBU1-1/4N SAE-12 SAE-4 RVBU3/4H SAE-8 SAE-4 RVBU3/4H DBDS10 1/2 BS 1/4 BS 3/4 BS RVBU3/4H SAE-8 SAE-4 RVBU1H SAE-12 SAE-4 SAE-16 RVBU1H DBDS10 3/4 BS 1/4 BS 1 BS RVBU1H SAE-12 SAE-4 RVBU1-1/4H 12 SAE-12 SAE-4 SAE-20 RVBU1-1/4H DBDS20 3/4 BS 1/4 BS 1-1/4 BS RVBU1-1/4H 07 SAE-12 SAE-4 1) orts G3 and G4 available only on RVB1... for use with AA10VSO71 Series 31 2) ressure relief valve must be ordered separately 3) Dimension M shown for S type adjustment See page 82 (MS , page 4 of 4) for mounting orientations.
12 84/148 Bosch Rexroth Corp. Industrial Hydraulics Section 6: ump Manifolds RA /07.04 ump Manifold ressure Relief Block with Unloading Orientation for AA10VSO71 Series 31 ump RVBU1... Directional Valve ( B solenoid only) 1 S Orienation for relief blocks: RVBU3/4... RVBU1... RVBU1-1/4... & 1 S
Standard Power Packs Variable Displacement
Standard Power Packs Variable Displacement Designed for Industrial Applications... Delivered in Minimal Time... Standard Features: Pressures up to 000 PSI max. Flow: 4.2 to 1 GPM Variable displacement
Compact power pack program RE 00163/ The Drive & Control Company
Compact power pack program RE 00163/08.06 he Drive & Control Company Bosch Rexroth Oil Control Compact power pack program Compact power pack modular system Compact power packs are available with standard
Product Tips and Features
2.00.01 02/2002. Manifolds & Valve acks roduct ips and Features apping lates apping lates are sandwich adapters designed to provide a means to easily take pressure readings from the work ports. 1. Standard
Pump Safety Block Model DBA... / DBAW, Series 1X
ump Safety lock odel D... / DW, Series X Sizes to 6 SI ( bar) 7 G (65 L/min) R 5 88/.95 Replaces:.9 ermits low pressure start-up and by-pass of pump Direct mounting to SE pressure port of pump Light biasing
Motors & Pumps- Hydraulic Pumps, Motors & Power Units
- Hydraulic umps, Motors & ower Units - Rapid Response...12-1 12-6 Hydraulic umps - Check Valves...12-7 Hydraulic umps - ower Units...12-8 12-9 12MOTORS & UMS Hydraulic umps - Vane ump...12-10 Motors...12-11
Pilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A)
4/3-4/2 Directional valve elements B8_A with or without (EDB-A) secondary relief valves, with or without LS connections B8_A (EDB-A) RE 183-56 Edition: 11.218 Replaces: 7.12 Size 4 Series Maximum operating
VED*M PROPORTIONAL PILOT OPERATED DIRECTIONAL CONTROL VALVES
CONTINENTAL HYDRAULICS VED*M PROPORTIONAL PILOT OPERATED DIRECTIONAL CONTROL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM TOUGH VED*M PROPORTIONAL
ISO 05 SANDWICH BODIES
ISO 5 SNDWICH ODIES luminum rated to 3 psi and Ductile Iron rated to 5 psi. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. FUNCION 3..81 to 1
SDH Series. Monoblock and Sectional directional valves
SDH Series Monoblock and Sectional directional valves Additional information his catalogue shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM--B -
Electric Proportional Pressure Reducing Valves Series ERP 03.ERP
Electric roportional ressure Reducing Valves Series ER 03.ER - 0912 Electric proportional pressure reducing valves SERIES ER Index of content: Description and main features: age 3 echnical data: age 4
COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.
T-Brake Motor Parts Information
T-Brake Motor Parts Information 2 4 5 6 7 8 9 1 3 10 14 15 14 13 32 31 33 16 34 14 20 35 36 33 34 30 29 29 28 27 20 26 25 24 REFERENCE NUMBER 13 REFERENCE NUMBER 16 REFERENCE NUMBER 28 Displ. Length Width
COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main
Monobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances
Close-Coupled Motor Pump Groups Axial Piston Variable Displacement Motor Sizes: 2 to 20 HP
Close-Coupled Pump Groups Axial Piston Variable Displacement Sizes: 2 to 20 HP RA 12 740/08.04 Replaces: 06.98 1/8 MPG-A10VSO, MPG-AA10VSO Flows up to 20 gpm See RA 12 742 for sizes 25 to 100 HP Pre-assembled
4-Way Directional Control Valve With Hydraulic Kick Out
Engineering & Manufacturing Solutions 4-Way Directional Control Valve With Hydraulic Kick Out Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 5-1/2 lbs. (2.5 kg) 30
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- -
RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.
R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to
Priority valve Type LPS
RE 27 548/10.98 riority valve Type LS Nominal sizes 40 to 160 Series 1X Nominal pressure 250 bar Maximum flow 160 L/min. H/AD/5977/98 riority valve type LS... Contents Description age Features 1 Ordering
LUDV control block of sandwich plate design
LUDV control block of sandwich plate design RE 64125/02.11 Replaces: 01.10 1/22 ype SX 14, SX 14 S Nominal size 14 Series 2X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar
COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief
SC HYDRAULIC ENGINEERING CORPORATION
Designer and Manufacturer of Hydraulic and neumatic Equipment C HYDRAULIC ENGINEERING CORORATION 113 Columbia treet - Brea, California 92821 - UA hone (714) 257-48 - Fax (714) 257-481 L6 ERIE AIR OERATED
LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS
Fluid Power Specialist Since 1948 LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS Copyright 2019, Almo Manifold & Tool Co. All rights reserved. All attempts have been made to make the information in
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Features MF Filters are manufactured with an aluminum head. MF, MFD, MFDS Series Spin-On Filters Choice of NPT, SAE straight thread O-ring boss, BSPP, and SAE 4-bolt flange porting to allow easy installation
Axial Piston Variable Pump A15VSO
Axial iston Variable ump A15VSO RE 928/5.12 1/4 Replaces: 3.1 Data sheet Series 1 Sizes 175 to 28 Nominal pressure 35 bar Maximum pressure 42 bar Open circuit Contents Ordering code for standard program
Accumulator shut-off block. Type 0532VAW. Contents. Features. RE Edition: Replaces: 07.10
ccumulator shut-off block ype 0532VW RE 5012 Edition: 2016-06 Replaces: 07.10 Nominal diameter DN20, DN32 Component series 1 Maximum operating pressure 330 bar [400 psi] H7559 Features Ready for connection
Header Manifolds - 0 Design
Header Manifolds - 0 Design Header block mounting hardware is supplied. See page 179 for itemized list. Ordering Information Specifications, descriptions, and dimensional data are subject to correction
Mobile Division. Service Parts List A10VO. Series 30 Size 71 RA E 08.93
Mobile Division E Service Parts List A10VO Series 30 Size 71 RA 06281-03-E 08.93 RA 06281-03-E/08.93 Variable Displacement Pump A10VO71, Series 30 Ordering of Parts For Rexroth to supply the correct parts
Safety & Shut-off Blocks
Safety & Shut-off Blocks Description HYDAC safety and shut-off blocks are designed to protect, shut-off, and discharge hydraulic accumulators or user units. The compact design simplifies the hydraulic
Functional Description HU /2012. Compact Hydraulic Power Packs USMA 05. Replaces HA /2008. p max 3600 PSI (250 bar) 4.
Compact Hydraulic ower acks USA 05 p max 3600 SI (250 bar) 4.5 G (17 L/min) 12/2012 Replaces HA 7211 6/2008 Compact hydraulic power packs for the use in lifting platforms, elevating tables, ramps, presses,
Series PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
EMechanically Operated Directional Valves
E DIRECIONL CONROLS Cam Operated Directional Valves hese valves may be used to shift the direction of oil flow by depressing the spool by way of a cam. Specifications Max. Operating Max. -Line Max. Flow
Double Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
VER*SP CONTINENTAL HYDRAULICS PROPORTIONAL PILOT RELIEF VALVES VER*SP - PROPORTIONAL PILOT RELIEF VALVES
CONTINENTAL HYDRAULICS VER*SP PROPORTIONAL PILOT RELIEF VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM DURABLE VER*SP PROPORTIONAL PILOT RELIEF VALVES
EFC. Electronically Adjustable Proportional Pressure Compensated Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. 3000 psi (207 bar) rating. Weighs 8-1/2 lbs. (3.9 kg). Standard Port size #12SAE (1-1/16 12). 10-Micron Filtration Recommended.
X-Series. Load-Sensing Sectional Control Block. Table of contents
X-Series Load-Sensing Sectional ontrol lock -6 Nominal pressure: 5076 psi (350 bar) Nominal flow rate l ump port: 66 gpm (250 l/min) l Working ports: 42 gpm (160 l/min) with compensator and load holding
Pos. Part No. Designation Quantity 1 R G A10V O 71 OV /31R-PSC92N00 A10V O 71 OV /31R-PSC92N0 2 R CONTROL VALVE
Part No.: R902400307 Designation: A A10V O 71 DFR /31R-PSC92N00 R910939141 Pos. Part No. Designation Quantity 1 R910999624 G A10V O 71 OV /31R-PSC92N00 L A10V O 71 OV /31R-PSC92N0 2 R902453430 CONTROL
LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS
Fluid Power Specialist Since 1948 LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS Copyright 2018, Almo Manifold & Tool Co. All rights reserved. All attempts have been made to make the information in
Catalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
3/2 and 4/2 directional poppet valve with solenoid actuation
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com 3/2 and 4/2 directional poppet valve with solenoid actuation ype M-.SED Size 10 Component
ENERPAC hydraulic valves are available in a wide variety of models and configurations.
irectional ontrol s EE hydraulic valves are available in a wide variety of models and configurations. Whatever your requirements directional control, flow control, or pressure control you can be sure that
Proportional pressure reducing valve, 3-way variant, pilot operated
roportional pressure reducing valve, 3-way variant, pilot operated RE 29286/1.1 Replaces: 2.8 1/14 ypes 3DRE(M) and 3DRE(M)E Sizes 1 and 16 Component series 7X Maximum pressure setting 315 bar (size 1)
36EFC. Series & EFC Valve Package
Engineering & Manufacturing Solutions Specifications: Rated for 0-24 gpm (0-91 lpm) depending on Series 36-38 work sections used. Pressure rating 3000 psi (207 bar). 10 Micron filtration recommended. See
3/2 and 4/2 directional seat valves with solenoid actuation
1/16 3/ and 4/ directional seat valves with solenoid actuation RE 047-XH-B/01.10 Replaces: 09.07 ype E-.SE 6...XH ype W-.SE 6...XH Size 6 Component series 6X Maximum operating pressure 40 bar Maximum flow
Low Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
4/3 4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
RA 183-52/1.11 1/1 4/3 4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections B8_8 (EDBZ) Summary Description Page General specifications 1 Ordering
Proportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
Directional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
Directional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
250 bar P max. Technical Features. Functional Description
Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations
BF Series Wafer/Lug Butterfly Valves
BF Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com
Power Units and Valves
Power Units and Valves Page Power Units Valves, Mounting Kits & Manifolds Worksheet Features Gear Pump Vane Pump With Manifolds With D03 Manifolds Power Unit Matrix D03 Valves D03 Accessory Valves D03
Hydro M t HYDRAULIC VALVES SN-4.
Hydro HYDRAULI VALVES A SRONG OMMIMEN O QUALIY Our concept is to sell and deliver the best quality of hydraulic valves, that fully meet our customer s rigorous requirements! o this end, our quality control
VER03MP CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED
CONTINENTAL HYDRAULICS VER03MP PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400
Sandwich plates Porting patterns to DIN Form A and ISO 4401
s orting patterns to DIN 440 Form and ISO 440 RE 48054/0.09 Replaces: 06.06 /6 ype HSZ 6 Valve side E L H Size 6 series Maximum operating pressure 5 bar C L F D late side able of contents Contents Information
SDS400. Sectional directional control valve
SDS4 Sectional directional control valve SDS4 Features Sectional directional control valve for high flow, available for fixed displacements hydraulic pumps. From to work sections Open centre Optional carry-over
Pressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
Proportional Valves. Auxiliary Function Modules for Proportional Valves. Hydrostat, Parallel-Flow-Path, Pilot Shuttle and Tapping Modules
June 1996 G-459 VICKERS roportional Valves uxiliary Function Modules for roportional Valves Hydrostat, arallel-flow-ath, ilot Shuttle and Tapping Modules Functional Symbols For typical applications of
3500 PSI Fixed Displacement Mobile Vane Pumps VQH Series (Supplement to Catalog 353)
3500 PSI Fixed Displacement Mobile Vane Pumps VQH Series (Supplement to Catalog 353) Single 35VQH Double 3525VQH Thru-Drive 35VQHT*S Single and Thru- Drive Pumps VQH Series fixed displacement single and
Proportional Directional Control Cartridge Valves: PSV10-34 & PSV12-34
Control Cartridge Valves: PSV10-34 & PSV12-34 SCHEMATIC PRESSURE* FLOW CAVITY COIL Page 2 PSV10-34-02 250 BAR 3600 PSI 22 LPM 6 GPM SDC10-4 M16-26W R16-20W Page 4 PSV12-34-02 260 BAR 3770 PSI 50 LPM 13
Directional Control Valves
Frequently sked Questions Frequently sked Questions What is the function of a directional control valve? directional control valve is the extend and retract control for your hydraulic cylinders. It provides
COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure
Isys Micro Series. Valve Products. Operating information. Material specifications. Pilot configuration
atalog 000-3US The Valve System incorporates a space saving back to back valve mounting design, and achieves flow rates of 0.35 v per valve with valves having a combined width of mm. This plug-in valve
Series 90 Axial Piston Motors. Technical Information
Series 90 Axial Piston Motors Technical Information HISTORY OF REVISIONS Table of Revisions Date Page Changed Rev. Fourth edition 2 520L0604 Contents GENERAL DESCRIPTION Cross section Cross section Cross
Max. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting
Remote ontrol Relief Valves his valve is used as a remote control valve for pilot operated type pressure control valves. EI--1-0 Graphic Symbol Specifications hreaded onnection Designation F- YB -01 -F
Pressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 6 DP Nominal size 6 Series 5X Maximum operating pressure 315 bar (4600 PSI) Maximum flow 60 L/min
Safety & Shut-off Blocks
SAF Series Safety & Shut-off Blocks Construction The Safety and Shut-off Block consists of a valve block, a built-in pressure relief valve, a main shut-off valve, and a manually operated bleed valve. In
Rexroth Power Packs. Features and Benefits RA / Fixed displacement. Designed for Industrial Applications.
Rexroth Power Packs Fixed displacement. Designed for Industrial Applications. Pressure: Up to 3000 PSI Flow: 0.4 to 10 GPM Tank Capacities: 2.5 to 20 gallon Features and Benefits Factory Built Units The
Rexroth Power Packs. Features and Benefits RA / Fixed displacement. Designed for Industrial Applications.
Rexroth Power Packs RA 51 300/03.04 1/8 Fixed displacement. Designed for Industrial Applications. Pressure: Up to 3000 PSI Flow: 0.4 to 10 GPM Tank Capacities: 2.5 to 20 gallon Features and Benefits Factory
PRODUCT CATALOG BUILT FOR HEAVY-DUTY PERFORMANCE
PRODUCT CATALOG BUILT FOR HEAVY-DUTY PERFORMANCE MADE IN THE USA 532 CFM Reliable Efficient Cost Effective Exclusive Manufacturer 800-253-5500 887 Vacuum Pump - Page 3 887 Hydraulic Drive Pump - Page 4
Universal Through Drive
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Universal Through Drive RE 95 581/12.05 1/8 Replaces: IP029 MH059 Technical Data Sheet For the variable
Variable Axial Piston Pump (A)A10VSO
Industrial Hydraulics open circuit Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Variable Axial Piston Pump (A)A1VSO Size 18... 14 Series 31 Nominal pressure 4 psi (28
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
Accessories Series PSB. Specifications
Catalog HY14-252/US Technical Information General Description electrohydraulic pressure switches are high performance devices that provide an electrical signal when sensed pressure rises above or falls
DIT VALVE ASSEMBLY PARTS CATALOG
PARTS CATALOG Revision B October 4, 2004 THIS PAGE LEFT BLANK INTENTIONALLY 2 WARNING AFTER REPLACEMENT OF ANY PART IN THIS DEVICE, THE OPERATION OF THE DEVICE MUST PASS TESTS PRESCRIBED IN THE LATEST
Mobile Division. Service Parts List AA4VG. Series 32 Size 125 RA E 02.97
Mobile Division E Service Parts List AA4VG Series Size 1 RA 900-0-E 0.97 RA 900-0-E/0.97 Ordering of AA4VG Parts For Rexroth to supply the correct parts for your unit, please include all of the following
ISO 05 SANDWICH BODIES
ISO 5 SNDWICH ODIES luminum rated to 3 psi and Ductile Iron rated to 5 psi. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. FUNCION 3. 1. ir leed
3/2 and 4/2 directional seat valves with solenoid actuation
1/16 /2 and 4/2 directional seat valves with solenoid actuation RE 22047-XH-B2/09.12 Replaces: 05.12 ype E-.SE 6...X... ype W-.SE 6...X... Size 6 Component series 6X Maximum operating pressure 420 bar
Accumulator shut-off block. Type ABZSS. Contents. RE Edition: Replaces: 05.13
Accumulator shut-off block Type ABZSS RE 011 Edition: 2016-07 Replaces: 0.1 Nominal diameter DN08; DN10; DN20; DN0 Component series X Maximum operating pressure 0 bar [07 psi] HAD8066 Contents Features
Radial piston pump PR4 series 1X
Radial piston pump R4 series 1X RA 1160 Edition: 07.015 Replaces: 08.005 Fixed displacement izes 0,40 to,00 Maximum working pressure 700 bar (10150 psi) Maximum displacement cm 3 (0.1 in 3 ) R4-1X/1,00-450WA01M01
Deep Well Pump Control Valve
MODEL 61-02 661-02 Deep Well Pump Control Valve Prevent Surges in Pipelines Simple Hydraulic Operation Adjustable Opening & Closing Speeds Solenoid Control Can Be Operated Manually Proven Reliable Design
Axial piston variable pump A11V(L)O series 40
xial piston variable pump 11V(L)O series 40 RE 92510 Issue: 10.2014 Replaces: 10.2013 izes 110 to 280 Nominal pressure 350 bar (5100 psi) Maximum pressure 420 bar (6100 psi) Open circuit Characteristics
SR1A-A2. Functional Description HA /2012. Directly Operated Pressure Relief Valves. Replaces HA /2010. Screw-in cartridge design
Directly Operated Pressure Relief Valves SRA-A2 HA 5063 7/202 3/4-6 UNF p max 350 bar (5080 PSI) Q max 30 L/min (7.9 GPM) Replaces HA 5063 8/200 Screw-in cartridge design 4 pressure ranges Pressure setting
Ford Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
New Fixed Displacement Industrial Hydraulic Power Packs
New Fixed Displacement Industrial Hydraulic Power Packs Designed for Industrial Applications... Delivered in Minimal Time... Standard Features: Pressures up to 3000 PSI Flow: 0.4 to 10 GPM Fixed displacement
Accessories. Subplates and Connection Plates for Four-Port Directional Valves. Vickers. ISO 4401, 02/03/05/07/08 General Description.
Vickers ccessories Subplates and Connection lates for Four-ort Directional Valves ISO 4401, 02/03/05/07/08 General Description his range of subplates and auxiliary connection plates offers an economical
Behringer Ball Valve Ordering Code
Ball Valve Catalog Behringer Ball Valve Ordering Code 1 Behringer 2-Way Ball Valves Block Body Valves with Threaded Connections Size Range: 1/4-1 Steel Material Delrin Ball Seats (Others available on request)
Whisper Pumps VPV Vane Pumps
Whisper Pumps VPV Vane Pumps Contents Whisper Vane Pump Catalog 3 Contents Introduction 4 Benefits 4 Specifications 5 Ordering details 8 Performance characteristics 12 VPV 16 to PSI (21 Bar) 12 VPV 25
4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated Model 4 WRA(E)B Size 6 Series 1X
ALUMINUM HIGH PERFORMANCE GEAR PUMPS
ALUMINUM HIGH PERFORMANCE GEAR PUMPS FEATURES EXTRUDED ALUMINUM DIE CAST BODY ALUMINUM MOUNTING FLANGE / COVER FLOATING AXLE SLEEVE AND DU BEARINGS DOUBLE LIP SHAFT SEAL TO PREVENT CAVITATION AND LEAKAGE
GROUP 11 HYD. PUMPS & VALVES
GROUP 11 HYD. PUMPS & VALVES T944 EXTENDO PUMP INSTALLATION, FL-14490... 11-2 PUMP ASSEMBLY, LL-7500-11... 11-4 PUMP ASSEMBLY, LL-7500-11, (PUMP SECTION, LL-7501-15)... 11-6 PUMP ASSEMBLY, LL-7500-11,
PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging
PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging General Description: The PDC "Elastomer Lined" series butterfly valves are available in both full lug and wafer styles.
CS-SCB Sander Control Block Manual
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service CS-SCB Sander Control Block Manual The Drive & Control Company Copyright 1996 Bosch Rexroth Canada All
Axial piston variable pump (A)A4VSO
Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit
Model-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
4/2 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 4/2 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback RA 29024/01.05
Illustrated Parts List for VMAC System H E
Illustrated Parts List for VMAC System H00001-E 1 Main Assembly... 2 2 Inlet Valve and Compressor System, (90006 & P1002)... 3 Cooler Assembly 900069... 6 Manifold Assembly, 9000... 5 Tank Assembly, 900050...
Directional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold