Constant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM <1.4HP / 1.04kW

Transcription

1 Constant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM <1.4HP / 1.04kW Powerful governed direct drives with no gears: up to 1.4 HP / 1.04 kw. Faster feed rates increased productivity at constant 25,000 rpm - 65,000 rpm. Patented constant high speed and high torque governed motor cuts materials faster and cleaner. Finer finished surfaces. 5 micron accuracy - upgrade option to 2 micron. Light & precise: Low vibration. Totally oil free. No gears, no vanes. No lubrication, no maintenance, no control unit. Only two moving parts: turbine + bearings for less repairs.

2 702MX 701MX 700MX 11oz [0.31kg] cleaner faster constant high speed and torque. duration and reduces thermal expansion. sealed steel housing. No control unit. tight dimensions. at governed constant high speed. 700 SEALED STEEL SERIES h7 tolerance: h7 tolerance: F 2.41[61.11] 1.61[40.90] Ø1.50 [38.10] h7 tolerance: F 2.41[61.11] 1.61[40.90] Ø1.50 [38.10] 4.34[110.35] 1.18[30.00] Mounting Area: 1.18 x mm x 95mm 0.60[15.24] Mounting Area: 0.98 x mm x 38mm 1.50[38.10] Ø0.98 [25.00] 5.60[142.27] 1.00[25.40] Mounting Area: 1.18 x mm x 38mm Ø1.18 [30.00] 5.32[135.15] 1.50[38.10] 0.91[23.03] 0.47[12.00] 0.72[18.29] 0.47[12.00] ER-8 Collet Shown ER-11 Collet Shown ER-8 Collet Shown Inlet and exhaust connectors are standard equipment on all 700 Series Motors. Exhaust hoses are an available option. For upgrade to 2 micron select UP Collet. General Specifications 700MX 701MX 702MX Governed Speed RPM 40,000 / 50,000 / 65,000 40,000 / 50,000 / 65,000 40,000 / 50,000 / 65,000 Power Rating HP [kw].3 [.22] /.3 [.22] /.4 [.30].3 [.22] /.3 [.22] /.4 [.30].3 [.22] /.3 [.22] /.4 [.30] Inlet Air Pressure 90 PSI [6.2 Bar] 90 PSI [6.2 Bar] 90 PSI [6.2 Bar] Idle Air Consumption CFM [L/S] 4 [1.88] / 4 [1.88] / 4 [1.88] 5 [2.36] / 6 [2.83] / 6 [2.83] 5 [2.36] / 6 [2.83] / 6 [2.83] Working Air Consumption CFM [L/S] 6 [2.83] - 9 [4.24] 7 [3.30] - 10 [4.72] 7 [3.30] - 10 [4.72] TIR Collet Held Shank [0.005mm] [0.005mm] [0.005mm] Sound Level (with exhaust hose fitted) Less Than 65 dba Less Than 65 dba Less Than 65 dba Max Shank Capacity 1/8 [3mm] or 1/4 [6mm] 1/8 [3mm] or 1/4 [6mm] 1/8 [3mm] or 1/4 [6mm] Copyright 2010 Air Turbine Technology Inc.

3 Constant High Speed Precision Motor Mounts 703MX 40,000-50,000 RPM 0.30 hp [0.22 kw] 24oz [0.68kg] drilling, milling, finishing. less vibration, less repairs. h7 tolerance: [ ] F Ø1.50 [38.10] 4.87[123.70] 2.90[73.74] Ø1.42 [36.00] Mounting Area: 1.42 x mm x 74mm 1.075[27.31] 704MX at governed 65,000 rpm. h7 tolerance: [ ] F 1.57[40.00] ER: 11: 4.32[109.73] 3.17[80.61] Mounting Area: 1.57 x mm x 81mm 2.17[55.18] ER-8: 1.00[25.40] ER-11: 1.15[29.21] ER-11 Collet Shown 705MX 30,000-50,000 RPM 0.95 hp [0.76 kw] 32oz [0.91kg] vibration, less repairs. h7 tolerance: [ ] 1/4" NPT (3X) 1/4" NPTF 1.99[50.51] 7.69[195.33] Mounting Area: 1.57 x mm x 82mm 3.21[81.52] 0.70[17.78] 1.090[27.69] Diameter hose and couplings. Ø2.25 [57.12] Ø1.57 [40.00] General Specifications 703MX 704MX 705MX Governed Speed RPM 40,000 / 50,000 40,000 / 50,000 / 65,000 30,000 / 40,000 / 50,000 Power Rating HP [kw].3 [.22] /.3 [.22].3 [.22] /.3 [.22] /.4 [.30].8 [.60] /.9 [.68] /.95 [.76] Inlet Air Pressure 90 PSI [6.2 Bar] 90 PSI [6.2 Bar] 90 PSI [6.2 Bar] Idle Air Consumption CFM [L/S] 5 [2.36] / 6 [2.83] 5 [2.36] / 6 [2.83] / 6 [2.83] 16 [7.55] / 20 [9.44] / 20 [9.44] Working Air Consumption CFM [L/S] 7 [3.30] - 10 [4.72] 7 [3.30] - 10 [4.72] 17 [8.02] - 45 [21.2] TIR Collet Held Shank [0.005mm] [0.005mm] [0.005mm] Sound Level (with exhaust hose fitted) Less Than 65 dba Less Than 65 dba Less Than 65 dba Max Shank Capacity 1/4 [6mm] 1/8 [3mm] or 1/4 [6mm] 1/4 [6mm] Air Turbine Motors are totally oil free and eliminate contamination from lubrification.

4 725JSL 202HD 30,000-50,000 RPM 0.50 hp [0.37 kw] 30,000-65,000 RPM 0.55 hp [0.41 kw] 11oz [0.31kg] SHANK MOUNTED DEBURRING MOTOR Metal Bearings Standard, Ceramic Bearings Optional. accelerated production. 2.00[50.80] 0.75[19.05] Ø2.25 [57.15] 3/8" NPT ALUMINIUM SERIES 5.83 [148.08] 4.97 [126.24] 0.86 [21.84] Ø1.00 [25.4] Ø0.63 [16.00] Steel Barrel Diameter: 1 (25mm) Steel Barrel Diameter: 0.74 (19mm) 210HD 25,000-40,000 RPM 0.88 hp [0.66 kw] 32oz [0.91kg] barrel + low vibration. Bearings Optional. Steel Barrel Diameter: 1 (25mm) General Specifications 725JSL 202HD 210HD Governed Speed RPM 30,000 / 40,000 / 50,000 30,000 / 40,000 / 50,000 / 65,000 25,000 / 30,000 / 40,000 Power Rating HP [kw].40 [.30] /.45 [.34] /.50 [.37].40 [.30] /.45 [.34] /.50 [.37] /.55 [.41].76 [.57] /.83 [.62] /.88 [.66] Inlet Air Pressure 90 PSI [6.2 Bar] 90 PSI [6.2 Bar] 90 PSI [6.2 Bar] Idle Air Consumption CFM [L/S] 10.5 [4.95] / 11 [5.19] / 14.5 [6.84] 10 [4.7] / 13 [6.1] / 14 [6.6] / 14 [6.6] 13 [6.1] / 14 [6.6] / 14 [6.6] Working Air Consumption CFM [L/S] 11 [5.19] - 22 [10.4] 11 [5.19] - 20 [9.4] 14 [6.61] - 35 [16.52] TIR Collet Held Shank [0.03mm] [0.03mm] [0.03mm] Sound Level (with exhaust hose fitted) Less Than 67 dba Less Than 67 dba Less Than 67 dba Max Shank Capacity 1/4 [6mm] 1/8 [3mm] 1/4 [6mm] The 200 / 400 Series are Aluminium Housing Motors for light weight with steel mounting section for rigidity in fixturing. Copyright 2010 Air Turbine Technology Inc.

5 Why Air Turbine Motors are different: torque under load for faster, cleaner production. oil and no maintenance. 24/7 Reliability. marking cleaner at higher speeds. Air Turbine Motors tm are totally oil free and eliminate contamination from lubrication. Dry, Clean 90PSI / 6.2 BAR compressed air required. Accessory 3 micron filter/extractor available: Part # HD 25,000-40,000 RPM 0.88 hp [0.66 kw] 40oz [1.13kg] 1.58[40.11] 3/8" NPT X = Patented Double Turbine for higher power power 8.74[222.12] 5.20[132.08] 1.36[34.54] 1.05[26.54] Diameter hose. Powerful Workhorse.. Ø 3.10 [78.68] Ø 1.62 [41.15] Ø Steel Barrel Diameter: 1.6 (41mm) 430XHD 25,000-40,000 RPM 1.4 hp [1.04 kw] 42oz [1.19kg] 3/8" NPT 2.04[51.80] 9.20[233.80] 5.20[132.08] Ø1.62 [41.15] 1.05[26.54] Ø Diameter hose + Couplings. Totally Oil-Free. Ø 3.10 [78.68] Steel Barrel Diameter: 1.6 (41mm) General Specifications 430HD 430XHD Governed Speed RPM 25,000 / 30,000 / 40,000 25,000 / 30,000 / 40,000 Power Rating HP [kw].76 [.57] /.83 [.62] /.88 [.66] 1.2 [.90] / 1.3 [.98] / 1.4 [1.04] Inlet Air Pressure 90 PSI [6.2 Bar] 90 PSI [6.2 Bar] Idle Air Consumption CFM [L/S] 13 [6.1] / 14 [6.6] / 14 [6.6] 16 [7.55] / 17 [8.02] / 18 [8.50] Working Air Consumption CFM [L/S] 14 [6.61] - 35 [16.52] 19 [8.97] - 30 [14.2] TIR Collet Held Shank [0.03mm] [0.03mm] Sound Level (with exhaust hose fitted) Less Than 67 dba Less Than 67 dba Max Shank Capacity 1/4 [6mm] 1/4 [6mm] 40 Air Turbine Spindles for CNC Milling

6 The Air Turbine Advantages Constant high speed and torque under variable load. 25,000 to 65,000 RPM, HP / kw. Totally oil-free system; grease-packed bearings. Greater accuracy, faster feed rates. accelerated production. High peripheral speed for improved cutting action, cleaner finished surfaces and longer cutting tool life. Fewer moving parts, less maintenance, fewer repairs. So Quiet! Under 67 dba. No vanes or gears, no maintenance, no control system. Turbine drive, less vibration, less heat, less repairs. Robotic finishing, milling, drilling and lathe applications. Up to 30% savings on compressed air consumption. Inlet air pressure 90 PSI / 6.2 Bar. Dry air only. 12 Month Limited Warranty / CE Mark. 5 Micron accuracy on 700 Series Motors. Optional upgrade to 2 Micron accuracy. (certain models only) No control system, no lubrication. Standard double front ceramic bearings on 430 Units. Standard ER-8/ER-11 Collets on 700 and 430 Series units. Collet Wrenches supplied with all tools. 202HD 210HD 725JSL 702MX 430XHD 700MX Distributor: SEF MECCANOTECNICA SEDE Via degli Orefici - Blocco FUNO (BO) ITALIA Tel Fax sef@sefmecc.it Do not use couplings/hoses less than 1/4 /6mm internal diameter. With 210, 525X, 704, 705 and 725 units use a minimum 3/8 / 9. 5mm internal diameter coupling/hose. Always use a 3 micron filter and/or extractor where required and check specified PSI or L/S air flow. Use 6.2 B ar / 90 psi clean, dry, oil-free air only. Use eye protection and follow safety instructions. Supply is subject to Air Turbine Technology Inc, (A TT) distributor policies and upon terms contained in the ATT distributor agreement. Subject to availability, change of specifications, price and terms without notice. All specifications approximate Air Turbine Technology, Inc. All rights reserved.