DURA-SLIDE MM-SERIES JJ-SERIES. Air Shuttles. MM-Series - 2 Position Shuttle. JJ-Series - 3 Position Shuttle 2 POSITION SHUTTLING DEVICE
|
|
- Millicent Carpenter
- 5 years ago
- Views:
Transcription
1 DUR-SLIDE ir Shuttles MM-SERIES 2 POSITION SHUTTLING DEVIE JJ-SERIES 3 POSITION SHUTTLING DEVIE DUR-SLIDE MM and JJ Series of ir Shuttles are another R&I development made to answer the automation industry s requirement for a standard stroked slide to meet special applications. oth series offer a compact size and the quality construction and durability you ve come to expect. FETURES DUR-SLIDE MM and JJ Series were developed as isolation shuttles, typically found at the end of a parts feeder track for mounting tooling nests. However the shuttling devices can be used for any situation were accurate shuttling between 2 or 3 positions is required. oth the MM and JJ series have fixed internal stops to provide accurate strokes and to assure complete interchangeability for field replacement. Furthermore both the MM and JJ shuttles are fully field serviceable with our repair kits. Standard strokes are listed on the following pages and other strokes, in this range, are available at no extra cost and no extra delivery time. The sliding tables are supported by Oilite bushings running on hardened shafting and utilize una- N cup seals. MOUNTING STYLES DUR-SLIDE MM and JJ Series units can be mounted and located in any plane with provided mounting holes and dowel pin holes. The sliding table also has tapped and dowel holes for easy adaptations to additional work moving/holding devices or customer tooling. 2 position shuttle ir powered Standard strokes 3 position shuttle ir powered MM See Page JJ ir shuttles offer a compact alternative to standard linear slides or linear thrusters and are perfect for accurately shuttling or positioning of tooling. See Page OPERTING PRINIPLE MM-Series - 2 Position Shuttle Position 1 - Table Right Position 2- Table Left TEHNIL SPEIFITIONS Pneumatic Specifications ENGLISH METRI Pressure Range psi 3-7 bar ylinder Type Double cting Dynamic Seals U-cups una-n Required Valves 4-way, 2 position Temperature Range una-n Seals -30 to 180 F -35 to 80 Viton Seals (-V option) -20 to 300 F -30 to 150 JJ-Series - 3 Position Shuttle Position 1 - Table Right Position 2 - Table enter Position 3 - Table Left IN EXH IN EXH IN EXH EXH IN 4-3.1
2 MNUFTURING O. PRODUT FETURES DUR-SLIDE MM & JJ-SERIES ircraft Grade luminum lack nodize Finish Simple and Highly Durable Time tested, field approved design ompact Design Internal cylinder reduces overall length Multiple Mounting Features Tapped and Dowel Holes in Sliding Table and Main body ronze ushings Oil impregnated bronze bushing for high load and low wear. Magnetic Sensors available Dovetail with Quick Disconnect up Seals Greater service life Precision Ground Shafting ase hardened to Rc MOUNTING INFORMTION Mounts and operates in any orientation DESIGNED - MNUFTURED - SSEMLED IN THE US MIN ODY TOOLING ody can be mounted with Tapped holes on bottom and both sides. Positive location with slip fit Dowel holes. Payload can be mounted directly to sliding table with Tapped holes. Positive location with slip fit Dowel holes
3 MNUFTURING O. DIMENSIONL DRWING DUR-SLIDE MM 2 POSITION SHUTTLE DEVIE SPEIFITIONS MM MMM Maximum ir Pressure 100 psi 6.9 bar Thrust / 5.5bar 24.5 lbf N Weight 1.15 lb 0.52 kg ylinder ore Diameter 0.625" 15.9 mm Shaft Diameter 0.250" 6.35 mm MX Stroke mm W M S LODING MM MMM Max Payload W 10 lbs 4.5 kg Max Moment M S 15 lbf-in 1.69 N-m Flow controls recommended for nearly all applications HOW TO ORDER : SI UNIT METRI SI MODEL STROKE SENSOR M MM - - V - RM SELS METRI M STROKE Inch: 1.25, 1.00, 0.75, 0.50, 0.25 mm: 31.75, 25.4, 19.05, 12.7, 6.35 SELS V - Viton (standard una - N) MGNETS RM - Magnetic Sensor Ready ESSORIES (order separately) MGNETI SENSOR KITS * (Dovetail mounted) DSK-N - Magnetic Sensor NPN w/ quick disconnect Kit DSK-P - Magnetic Sensor PNP w/ quick disconnect Kit * Requires Sensor Ready (-RM). Sensors kits include (2) sensors and (2) 5 meter cables. MGNETI SENSORS * (Dovetail mounted) DS-N - Magnetic Sensor NPN w/ quick disconnect DS-P - Magnetic Sensor PNP w/ quick disconnect * Requires Sensor Ready (-RM). Includes (1) sensor. SMPLE ORDER: MM-1.25-RM Ex) MM Shuttle with stroke with sensor magnets SENSOR LE SEN-5 - Quick Disconnect PUR able 5M Length USTOM DESIGNS LWYS VILLE PLESE ONTT US FOR INFORMTION 4-3.3
4 EXPLODED VIEW MNUFTURING O. DUR-SLIDE MM-SERIES PRTS LIST HOW TO ORDER PRTS ITEM REQ D NME PRT # OPTIONS 1 1 Main ody MM-101 -RM Sliding Table MM-102 -RM Piston * MM ylinder ap * MM ushing * MM Rod * MM Stroke lock MM-107 -S U-cup * UP-215 -V O-ring * ORG-016 -V 2 1 Repair Kit * # MM- -V 2 METRI PRT NUMER M - OPTIONS SMPLE ORDER: MM Ex) MM Stroke lock for stroke OPTIONS (see product pages for information) 1 - S = Stroke (Stroke lock only required for [25.4mm] stroke and below) 2 - V = Viton Seals if required 3 - RM = Sensor Ready unit NOTES * - Metric code not required # - Repair Kits include req d qty of parts marked with 4-3.4
5 MNUFTURING O. DIMENSIONL DRWING DUR-SLIDE JJ 3 POSITION SHUTTLE DEVIE SPEIFITIONS JJ MJJ Maximum ir Pressure 100 psi 6.9 bar Thrust / 5.5bar 24.5 lbf N Weight 1.8 lb 0.82 kg ylinder ore Diameter 0.625" 15.9 mm Shaft Diameter 0.250" 6.35 mm Stroke to Left or Right mm W M S LODING JJ MJJ Max Payload W 10 lb 4.5 kg Max Moment M S 15 lbf-in 1.69 N-m Flow controls recommended for nearly all applications HOW TO ORDER : SI UNIT ESSORIES (order separately) METRI SI MODEL SENSOR M JJ - V - RM SELS METRI M SELS V - Viton (standard una - N) MGNETS RM - Magnetic Sensor Ready STROKE ustom Strokes available - ontact Factory SMPLE ORDER: JJ-V-RM Ex) JJ Shuttle with Viton seals and sensor magnets MGNETI SENSOR KITS * (Dovetail mounted) DSK-3-N - Magnetic Sensor NPN w/ quick disconnect Kit DSK-3-P - Magnetic Sensor PNP w/ quick disconnect Kit * Requires Sensor Ready (-RM). Sensors kits include (3) sensors and (3) 5 meter cables. MGNETI SENSORS * (Dovetail mounted) DS-N - Magnetic Sensor NPN w/ quick disconnect DS-P - Magnetic Sensor PNP w/ quick disconnect * Requires Sensor Ready (-RM). Includes (1) sensor. SENSOR LE SEN-5 - Quick Disconnect PUR able 5M Length USTOM DESIGNS LWYS VILLE PLESE ONTT US FOR INFORMTION 4-3.5
6 EXPLODED VIEW MNUFTURING O. DUR-SLIDE JJ-SERIES PRTS LIST HOW TO ORDER PRTS ITEM REQ D NME PRT # OPTIONS 1 1 Main ody JJ-101 -RM Sliding Table JJ-102 -RM Piston * MM ylinder ap * MM ushing * MM Rod * JJ Piston Stop * JJ Stop Guide * JJ U-cup (Piston) * UP-215 -V U-cup (Piston Stop) * UP-220 -V O-ring * ORG-016 -V Shaft Seal * SS-210 -V 1 1 Repair Kit * # JJ- -V 1 METRI M PRT NUMER SMPLE ORDER: JJ-102 Ex) JJ Sliding Table OPTIONS OPTIONS (see product pages for information) 1 - V = Viton Seals option 2 - RM = Sensor Ready unit NOTES * - Metric code not required # - Repair Kits include req d qty of parts marked with
DURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1
NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need
More informationESCAPEMENT DEVICES DURA-SCAPE BC SERIES STANDARD LINE 2-1.1
DURASCAPE BC SERIES STANDARD LINE Full range of sizes and strokes Hard Stops Robust design Few moving parts Extremely Durable Fully field serviceable Sensors Available See Page 21.2 FOR ORE INFORATION
More informationDURA-SCAPE CC-SERIES. Non-Rotating Air Cylinder CC-1 CC-2 TECHINICAL SPECIFICATION OPERATING PRINCIPLES
CC Series of Non-Rotating Air Cylinders are designed as multi purpose units. The CC series is designed for applications where all the features of our SC series are not required, while still offering the
More informationEscapements. AGE Series
GE Series Escapements merican Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 Fax: 203-452-5943 info@gi-utomation.com www.gi-utomation.com 1 GE-1 Feed Escapement uilt-in ir Cylinder
More informationDURA-SLIDE AIR-SERIES. Air-Powered Slides AIR-10 AIR-20 AIR-30 AIR-40
AIRSERIES AIR Series of Pneumatic Linear Positioning Devices provide a practical, lowcost approach to automatic work positioning. The builtin air cylinder simplifies slide operation and eliminates the
More informationRotary Actuators DRG. See Page3.2 DRF. See. Page3.8 DRM
Rotary Actuators RR-18/28 Light Duty Rack and Pinion Rotary Actuator Series Designed for small or lightweight Low profile and bearing supported turn table provides an extremely compact package for tight
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationRod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")
T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod
More informationParallel Grippers- Triple Wedge Centering Series
RP SERIES 1.1 Parallel Grippers- riple Wedge entering Series achine loading hree jaws make this gripper ideal for machine loading and unloading. Sealed design repels chips and other particulate from the
More informationLinear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationSeamless Integration of PHD Grippers to Universal Robots
Seamless Integration of PH Grippers to Universal Robots PNEUON02 ENEFITS n Provides seamless, cost-effective, pneumatic end-effector integration for collaborative robots n Incorporated M valves n ouples
More informationAngular Grippers 2.1 ANGULAR GRIPPERS
ngular Grippers NGULR GRIPPERS 2.1 ngular Motion Gripper Product Overview NGULR GRIPPERS 2.2 RU Series ngular Gripper 2-Jaw ngular Gripper Spring ssist Pneumatic or Hydraulic Operation Preferred Market:
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationLINEAR THRUSTER SLIDES
LINEAR THRUSTER SLIS PNEUMATIC INTERNALLY POWERED DIRECTCONNECT TM MODULAR SERIES L-Series long body thruster, shown smaller than actual size. E-Series short body thruster, shown smaller than actual size.
More informationCompact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm
ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto
More informationThe New Generation ISO Cylinders for a Dynamic Future
Electric Drives Linear Motion and and Controls Hydraulics Assembly Technologies Pneumatics Service The New Generation ISO Cylinders for a Dynamic Future Rexroth s new generation of ISO pneumatic cylinders
More informationDouble-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
More informationPNEUMATIC SLIDES (SERIES ZA)
ZA PNEUMATIC SLIDES (SERIES ZA) Bore 2x6, 2x8, 2x12, 2x16 or 2x20 mm. Stroke from 10 mm to 150mm. Optional end of stroke adjustments using shock absorbers, rubber bumpers, (FGD) or grub screw, (FPD). Optional
More informationHydraulic Systems Hydraulic Clamping
ydraulic Systems 19. 1 ydraulic lamping Page ydraulic lamping Page 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 19.2-19.3 3-1-S-475 3-1--475 19.6 52-Series 19.3 3-1-S-11 19.7 3-1--11
More informationAGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
More informationCipriani Harrison Valves Corp.
pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
rtisan Technology Group is your source for quality new and certified-used/pre-owned equipment FST SHIPPING ND DELIVERY TENS OF THOUSNDS OF IN-STOK ITEMS EQUIPMENT DEMOS HUNDREDS OF MNUFTURERS SUPPORTED
More informationFeatures and Benefits
...........................................................3-14 Features and Benefits..............................................................................3 How To Order....................................................................................4
More informationhydraulic power clamps
ourtesy of M/Flodyne/ydradyne Motion ontrol ydraulic Pneumatic lectrical Mechanical (8) 426-548 www.cmafh.com hydraulic power clamps Table of ontents ydraulic lamping 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Rod Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationCYLINDERS. cylinders AIR MITE PNEUMATIC CYLINDERS TIE ROD CYLINDERS
YNRS 8 R MT PNUMT YNRS ine, and Micro ylinders. Our versatile cylinder product line can be used to meet their requirements. ll ir-mite s proudly carry the Made in US label. ylinders have a durable, maintenance-free
More informationaluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm)
Technical Data Versions for pneumatic linear drive: Series OSP-P aluminum guide carriage Roller Guide Powerslide Loads, Forces and Moments aluminum clamping rail hardened steel rail roller cover with wiper
More informationhydraulic power clamps
hydraulic power clamps Table of ontents lick Page # View ydraulic lamping Page M-Y-# ydraulic lamping Page M-Y-# 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 3-4 3-1-S-475 3-1--475
More information1501 KUEBEL ST. HARAHAN, LA 70123
style ps1400 glass filled ptfe piston seals The PS1400 seals offer low friction and high strength in a compact double-acting piston seal design. The PTFE seal ring, combined with a rubber energizer, assures
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationSINGLE ACTING TELESCOPIC
SINGLE TING TELESOPI RM is pleased to offer a full line of standard telescopic designs for your equipment. These designs are pre-engineered using in stock material and internal components for quick order
More informationAngular Motion Gripper Product Overview
2. 1 Angular Motion Gripper Product Overview RUA Series Angular Gripper 2-Jaw Angular Gripper Spring Assist Pneumatic or Hydraulic Operation Preferred Market: l Global Page2.2 DCT/CT Series TM 18 Angular
More informationThrough Hole Parallel Gripper PPC Series
ourtesy of MA/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 8 hrough Hole Parallel Gripper PP Series hrough Hole Gripper: Designed for unique applications
More informationHigh-Torque, Easy Speed & Stroke Control, Field Adaptable
D R I V I N G T H E I N D U S T R Y F O R W A R D High-Torque, Easy Speed & Stroke Control, Field Adaptable Fully Adjustable Stroke Length and Jaw Stop Positions Flow Controls Fitted as Standard Quick
More informationMorin Figure HP Actuator
1,500 psig Operating Pressure Rating Direct Gas/Hydraulic ctuators Ductile Iron/Stainless Steel Quarter-turn Double cting and Spring Return Models Features and enefits High pressure construction eliminates
More information1501 KUEBEL ST. HARAHAN, LA 70123
style tr rod t-seals T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling
More informationAngular Grippers- 180 Series
D/ SERIES Angular Grippers- Series. angular gripper: he full jaw opening ( ) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator. Multiple mounting locations:
More informationgrippers pneumatic precision parallel movement DPP DirectConnect Series
grippers pneumatic precision parallel movement DPP Directonnect Series DPP Series No Adaptor Plates Required! Shown smaller than actual size. D-1M-E--5 linear thruster slide. Precision Gripping Preloaded
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationHFKN. The SMW-AUTOBLOK. Technology at the highest level:
Tehnology t the highest level: The SMWAUTOBOK FK Esy lurition even on vertil mhines with 3 rdil uiltin grese nipples. rge through hole for full use of spindle ore. igh effiieny of the wedge r drive ensures
More informationCompact cylinders. Fixing dimensions are compliant to norm ISO 6431 or UNITOP. Suitable for standard fixing elements
ompact cylinders Fixing dimensions are compliant to norm 431 or Suitable for standard fixing elements igh reliability and long lifetime Standard magnetic version Special strokes on request aterials arrel:
More informationTable of Contents. Numatics 2009 Rev. 1/09
Table of ontents RW Series...-8 eatures and Benefits... How To Order... Replacement omponents... imensions... 5 Technical Specifications... 6 Switch Information....7-8 Numatics 2009 Rev. /09 2 RW-Series
More informationSRX IVL LANDFILL PUMP BOTTOM LOADING
REV DESCRIPTION DTE PPROVED RELESE FOR PRODUCTION 5/9/008 SWells 6 7 6 6 9 0 0 8 8 7 5 5 5 8 9 8 5 ) THE MGNET ITEM 5 IS INSTLLED INTO THE PUMP HED NORTH POLE FIRST. 9 8 7 6 DRWN SWells 5/9/008 Q 75 West
More informationPARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
More informationFIXED GRIPPERS Page Number Part # Prefix ROUND STYLE QUICK INDEX
QUIK INDEX TG GRIPSERTS GRIPPER SYSTEM Page Number Part # Prefix TG GripSerts...8...TG Jaw Set / Retrofit / Kurt 6"...9...TGJ Screws and Protective overs...9...tg Screwdriver / Wrench / Accessories...9...TG
More informationSeries MXS ø6, ø8, ø12, ø16, ø20, ø25
ork table and air cylinder are integrated compactly. ir slide table is ideal for precise assembly. CL Repeatability of work mounting lush mountable auto switches n installed auto switch in the housing
More informationCONSTRUCTION, PARTS AND MATERIALS P-SERIES ACTUATORS
Sheet No.: 1.101.30 Rev. Date: January 2012 ONSTRUTION, PRTS ND MTERILS P-SERIES TUTORS P Parts Materials Executions Nr. Description Qty. Description Specification Std S.S. Shaft SR 1 ody 1 luminum lloy
More informationTABLE OF CONTENTS. power pumps. cylinders. accessories. hand pumps. INTRODUCTION pages 1-5
TLE OF ONTENTS INTRODUTION pages 1-5 power pumps Index...1 ompany Overview... 2-3 Safety Tips... 4-5 Introduction... 42-43 Proper Size & Selection... 44-45 G1 Series Electric... 46-47 G3 Series Electric...
More informationCylinders with integrated guide Series QCTF and QCBF
> Series QCTF - QCBF slide units CATALOGUE > Release 8.6 Cylinders with integrated guide Series QCTF and QCBF Double-acting, magnetic, with double bearings and flanges ø 20, 25, 32, 40 mm Magnetic sensors
More informationCABLE-DRIVEN PNEUMATIC ROTARY ACTUATOR
R LE-RIVEN PNEUTI ROTRY TUTOR ajor enefits Exceptionally low profile for confined spaces Three bore sizes and two standard rotations, 90 and 180 Standard internal shock pad eliminates metal to metal contact,
More informationMXP BAND CYLINDER MAXIMUM DURABILITY N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL ENGR PB CC MG LS BC4 BC3 BC2 MXP ABT.
www.tolomatic.com MXP BAND CYLINDER N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL CONTENTS N Internal Bearing Features... MXP_2 S Solid Bearing Features... MXP_4 P Profiled Rail Features... MXP_6
More informationHow to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV
ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)
More informationBall Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
More informationParallel Grippers- Miniature Series
RPM SERIES 1.16 Parallel Grippers- Miniature Series Precision applications: Preloaded dual- V roller bearings eliminate side play for excellent part position repeatability. Miniature size: Compact design
More informationSeries MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
More informationMTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2
Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber
More information1600 Series Liquid Level Controllers
SEE MORE T SORInc.com Request Quote 600 Series Liquid Level ontrollers 600 series liquid level controllers are manufactured to be ideal for oilfield scrubber and separator applications. Their rugged and
More informationProduct Data Sheet. Electronic Valve Actuator. SEVA (Smart Electronic Valve Actuator) DESCRIPTION FEATURES APPROVALS / RATINGS OPERATION
Electronic Valve ctuator SEV (Smart Electronic Valve ctuator) DESCRIPTION The SEV is our next generation Smart Electric Valve ctuator that provides our customers with an electric actuator with best-in-class
More informationMxp band cylinder MAXIMUM DURABILITY. N Internal Bearing S solid bearing P profiled rail.
www.tolomatic.com Mxp band cylinder N Internal Bearing S solid bearing P profiled rail Contents N Internal Bearing eatures..... MXP_2 S Solid Bearing eatures........ MXP_4 P Profiled Rail eatures.........
More informationBall Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
More informationYour Global Source for Today s Most Popular Solenoid Valves
lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International
More informationSINGLE ROD Pneumatic. Major Benefits
SINGL ROD Pneumatic SPMNT Major enefits Ideal for shot pin applications Shock pad options reduce noise and minimize end of stroke shock Imperial or metric versions available Simple construction for easy
More informationpneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
More informationRW Series eatures and Benefits
RW Series...............................................................................3-6 eatures and Benefits..............................................................................3 ow To Order....................................................................................4
More informationCrossed Roller Bearing Positioners
rossed Roller earing Positioners Parker Daedal precision crossed roller stages provide controlled, precise point-to-point positioning along a linear axis. Stages are comprised of two basic components:
More informationDouble-acting pneumatic cylinder type EC
Double-acting pneumatic cylinder type Information is only for informational purpose. ll specifications are subject to change without notice. 1 15-03-16 issue: 4 Double-acting pneumatic cylinder type Stafsjö
More informationModel B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F
Model Thermostatic Valves FETURES FLOW RTES OF 68-1200 USGPM TMPER-PROOF TEMPERTURE SETTINGS OF 55 F - 240 F OMPLETELY SELF-ONTINED POSITIVE 3-WY VLVE TION VILLE IN ST IRON, DUTILE IRON, RONZE, STEEL,
More informationMULTI-STAGES NFPA STYLE MOUNT
ULTI-STGES NFP STYLE OUNT WWW.STRYL.O ore size from 1½" to 10" Stroke up to 12" High Flow Design 250 PSI IR, Two-Year Warranty N.F.P. Style ount HEY DUTY - HIGH FLOW 3 SERIES ULTI-STGES IR YLINDERS 3 ULTISTGE
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationHousings and Miscellaneous Parts
Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1
More informationBimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)
Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with
More informationTable of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
More informationStandard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order
Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard
More informationVERTICAL THRUSTER PNEUMATIC SLIDE
ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series
More informationjamesbury Bulletin A107-1 Issue 7/2006
1-SERIES PNEUMTIC CYLINDER CTUTORS 1-Series piston actuators are available in either doubleacting or spring-return versions. The Series 1C and 1J provide for mounting in accordance with ISO 5211/1. These
More informationActuator Products. Actuator Products Air Cylinders Section B. Actuator Products. Catalog PDN1000-3US Parker Pneumatic
atalog PDN1-3US Air ylinders Section 1 Pictorial Index atalog PDN1-3US Tie Rod ylinders 3MA Series - Economy NFPA ylinder 6 ore sizes 1-1/2 through 5 inch 18 standard mounting styles Pressures up to PSIG
More informationSST SERIES PART POSITIONER
ISO 9001 REGISTERED SST SERIES PART POSITIONER ONE ACTUATOR TO ETEND AND TIP TOOLING AWAY REPEATABLE RETRACTED POSITION TREATED STEEL TIP PLATE WITH TAPPED HOLES/DOWELS & KEY FOR TOOLING 30 TIP ANGLE BASE
More informationarning FILURE OR IMPROPER ELECTION OR IMPROPER UE OF THE PRODUCT ND/OR YTEM DECRIED HEREIN OR RELTED ITEM CN CUE DETH, PERONL INJURY ND PROPEY DMGE. T
Tooling Plate Extra Low Profile Pneumatic Cylinder Catalog U08-0977/N October, 00 3, 40 and 50 mm ore izes hort Overall Length Flexible Porting Industry Interchangeable Non-Rotating Capability arning FILURE
More informationAppendix E Head and Valve Assembly Details All D-Style Models 351
Appendix E Hed nd Vlve Assemly Detils All D-Style Models FD Hed Vlve Holddown Assemlies Suction (spec P) 0 0 Suction (spec P) 0 0 Dischrge (ll specs) 0 WFD Hed Appendix E Hed nd Vlve Assemly Detils All
More informationSERIES SFP SLIDES INFORMATION SHEET. Ordering Data. U.S. Patent No. 6,857,780 International Patent No. CA PART NO.
Ordering Data SERIES SFP SLIDES INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationExtruded Thrusters. Brochure
Extruded Thrusters Brochure Chrome plated stainless steel guide shafts optimize bearing performance Mounting flexibility: Through & C-bore Tapped bottom Tapped rear Bottom T-slots Bronze bushing for heavy
More informationIFP MRV03 RELIEF VALVE MODULE
IF MRV03 RELIEF VLVE MODULE ISO4401-03 SIZE/NF D03 DJUSLE SNDRD MICROMEER KNO EXREMELY CISE CONROL WO SGE LNCE ISON FOUR RNGES VILLE LOW OVERRIDE MRV-03- MRV-03-W MRV-03- MRV-03- RELIEF MODULR VLVE SIZE
More informationINTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
More informationFDXS Series. required at temperatures below 0 C (32 F) None required, or ISO VG32. 0 ~ 5mm Standard with rubber bumper (both sides)
Bulletin FDXS-09 Features 1. Magnetic piston is standard in all sizes. 2. Non-rotating design enables precision positioning. ng. 3. Compact design saves space. 4. Suitable for multi-axis assemblies and
More informationBiffi Morin HP Series actuator
HP series - Direct gas / hydraulic actuator with ductile iron housing and carbon steel cylinders Spring return and double acting actuators Quarter-trun output torques to 240,000 lb. in. Features and benefits
More informationNEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
More information9 ORDERING INFORMATION MTJ MTJ SERIES
MODULR JKS Introduction: dam Tech MTJ series Modular Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules and regulations. dam Tech offers a multitude
More informationCAM LOCKS Expertise at your service
LOY M LOKS Expertise at your service The unique LOY cylinder construction offers reliable operation and ease of use in the most demanding applications. LOY EXPERTISE T YOUR SERVIE LOY cam locks have been
More informationMxp band cylinder. N Internal Bearing S solid bearing P profiled rail MAXIMUM DURABILITY
Mxp band cylinder N Internal Bearing S solid bearing P profiled rail MAXIMUM DURABILITY Pneumatic Actuators Electric Actuators Drives & Motors Largest selection of rodless cylinders in band, cable, and
More informationTOX -Powerpackage X-KT-System
TO -Powerpackage -KT-System The pneumohydraulic split system ata sheet 0.05 08 / 06 TO GmbH & Pressotechnik o. KG Riedstrasse 8850 Weingarten / Germany Find your local contact at: TO -Powerpackage -KT-System
More informationPBS Series Power Block Slide
PBS Series Power Block Slide www.numatics.com Table of Contents PBS Series Features and Benefits 3 How To Order 4 Technical Specifications 4 Dimensions 5 Quick Disconnect Cables 6 Switch Information 6-7
More informationMINIMATIC COMPACT - COMPETITIVE - FLOW CONTROL NORTHVALE KORTING LTD
MINIMTI OMPT - OMPETITIVE - FLOW ONTROL NORTHVLE KORTING LT MINIMTI ontrol Valves range of compact, lightweight, low cost control valves for use on liquid steam or gas applications. vailable in 2 way and
More informationCompressed air to
G G A S F J 2 N/ S/F Specifications escriptions Cylinder bore size Working fluid mm Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Rod
More informationHOLDERS. Straight Heavy-Duty Ejector Holders - Swivel head. FIGURE 6-1 (Material RWMA Class 2)
SEEDORFF ME orp. 866-RES-WELD (737-9353) Straight Heavy-Duty Ejector Holders - Swivel head 3 6 7 9 10 11 12 13 1 2 4 5 8 FIGURE 6-1 (Material RWM lass 2) THE ENTERLINE HEVY DUTY EJETOR HOLDER HS EEN DESIGNED
More informationEa series sr & da pneumatic actuators
Ea series sr & da pneumatic actuators CONTENTS DESIGN ND FETURES Page 3 PRTS ND MTERIL Page 4 DIMENSIONL DRWINGS Page OPERTING PRINCIPLES Page LIMIT STOP DJUSTMENT Page DOULE CTING TORQUE TLE Page SPRING
More informationAZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P.
Specifications Features Type ISO 6431 VDM 24562 CTOP P43P Series Z Configurations Z Double cting, Single od, Magnetic Piston, Cushions ZD Double cting, Double od, Magnetic Piston Construction Materials
More information3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional
More information