SINGLE ACTING TELESCOPIC

Transcription

1

2 SINGLE TING TELESOPI RM is pleased to offer a full line of standard telescopic designs for your equipment. These designs are pre-engineered using in stock material and internal components for quick order turnaround. With 36 base designs to select from, all you need to do is pick the configuration, stroke and mounting option that works best for your application. RM offers both Single and ouble cting designs with up to 5 stages, and a wide selection of standard mount configurations. Not sure what is the fit best for you? ontact the RM engineering team and let them help you select the best design for your equipment needs. The Single cting Telescopic cylinder is the simplest of telescopic designs. Single cting Telescopic cylinder is extended using hydraulic pressure, but is retracted using external forces (i.e. gravity or mechanical load) once the pressure is removed. Single cting cylinders offer a more compact design than a ouble cting design. RM s standard design includes specially prepared chrome tubing, high quality seals and high strength internal components that can be easily serviced and replaced. STNR FETURES Intended Use: Single acting extension Rated Pressure: 3000 PSI Rod Material: High tensile SE 1026/St2.3 OM, hard chrome plated arrel Material: High tensile SE 1026/St52.3 cold drawn tube precision honed for extended seal life Gland Material: High strength steel glands & stops (1045 Q&T) Piston Material: uctile iron (STM 536) s: SE standard; NPTF also available Plugs: High quality steel Internal Seals: North merican Paint Finish: 2 part urethane black (or custom colors) Testing: 100% full cycle tested STNR SINGLE TING TELESOPI YLINERS

3 2 Stage Model ore Rod iameter losed Length T-3.50-XX / / ,700 (STROKE/2) #8 OR T-4.50-XX / / ,800 (STROKE/2) #10 OR T-5.50-XX / / ,700 (STROKE/2) #12 OR T-6.75-XX / / ,200 (STROKE/2) #16 OR T-8.25-XX / / ,300 (STROKE/2) #20 OR T-9.75-XX / / ,300 (STROKE/2) #20 OR 3 Stage Model ore Rod iameter losed Length T-4.50-XX /3.50/ /3.00/ ,700 (STROKE/3) #8 OR T-5.50-XX /4.50/ /4.00/ ,800 (STROKE/3) #10 OR T-6.75-XX /5.50/ /5.00/ ,700 (STROKE/3) #12 OR T-8.25-XX /6.75/ /6.25/ ,200 (STROKE/3) #16 OR T-9.75-XX /8.25/ /7.50/ ,300 (STROKE/3) #20 OR 4 Stage Model ore Rod iameter losed Length T-5.50-XX /4.50/3.50/ /4.00/3.00/ ,700 (STROKE/4) #8 OR T-6.75-XX /5.50/4.50/ /5.00/4.00/ ,800 (STROKE/4) #10 OR T-8.25-XX /6.75/5.50/ /6.25/5.00/ ,700 (STROKE/4) #12 OR T-9.75-XX /8.25/6.75/ /7.50/6.25/ ,200 (STROKE/4) #16 OR 5 Stage Model ore Rod iameter losed Length T-6.75-XX /5.50/4.50/3.50/ /5.00/4.00/3.00/ ,700 (STROKE/5) #8 OR T-8.25-XX /6.75/5.50/4.50/ /6.25/5.00/4.00/ ,800 (STROKE/5) #10 OR T-9.75-XX /8.25/6.75/5.50/ /7.50/6.25/5.00/ ,700 (STROKE/5) #12 OR * ctual load may be limited based on final configuration. ll Specifications are subject to change without notice. STNR SINGLE TING TELESOPI YLINERS

4 OULE TING TELESOPI ouble cting Telescopic cylinders are characterized as cylinders that are both extended and retracted with hydraulic pressure. ouble cting Telescopic cylinder is a more complex design and involves additional sealing within the internal body of the cylinder to seal off the different stages. Passageways are machined into the internal components of the cylinder to allow for proper staging. These cylinder are usually specified when there is no external force to retract the cylinder. RM s standard ouble cting Telescopic design includes specially prepared chrome tubing, high quality seals and high strength internal components that can be easily serviced and replaced when required. STNR FETURES Intended Use: ouble acting extension & retraction Rated Pressure: 3000 PSI Rod Material: High tensile SE 1026/St2.3 OM, hard chrome plated arrel Material: High tensile SE 1026/St52.3 cold drawn tube precision honed for extended seal life Gland Material: High strength steel glands & stops (1045 Q&T) Piston Material: uctile iron (STM 536) s: SE ports; NPTF also available Shipping Plugs: High quality steel Internal Seals: North merican made Paint Finish: 2 part urethane black (or custom colors) Testing: 100% full cycle tested STNR OULE TING TELESOPI YLINERS

5 2 Stage Model ore Rod iameter losed Length Retracted T-3.50-XX / / ,700 (STROKE/2) #8 OR #6 OR T-4.50-XX / / ,800 (STROKE/2) #10 OR #8 OR T-5.50-XX / / ,700 (STROKE/2) #12 OR #10 OR T-6.75-XX / / ,200 (STROKE/2) #16 OR #12 OR T-8.25-XX / / ,300 (STROKE/2) #20 OR #16 OR T-9.75-XX / / ,300 (STROKE/2) #20 OR #16 OR 3 Stage Model ore Rod iameter losed Length Retracted T-4.50-XX /3.50/ /3.00/ ,700 (STROKE/3) #8 OR #6 OR T-5.50-XX /4.50/ /4.00/ ,800 (STROKE/3) #10 OR #8 OR T-6.75-XX /5.50/ /5.00/ ,700 (STROKE/3) #12 OR #10 OR T-8.25-XX /6.75/ /6.25/ ,200 (STROKE/3) #16 OR #12 OR T-9.75-XX /8.25/ /7.50/ ,300 (STROKE/3) #20 OR #16 OR 4 Stage Model ore Rod iameter losed Length Retracted T-5.50-XX /4.50/3.50/ /4.00/3.00/ ,700 (STROKE/4) #8 OR #6 OR T-6.75-XX /5.50/4.50/ /5.00/4.00/ ,800 (STROKE/4) #10 OR #8 OR T-8.25-XX /6.75/5.50/ /6.25/5.00/ ,700 (STROKE/4) #12 OR #10 OR T-9.75-XX /8.25/6.75/ /7.50/6.25/ ,200 (STROKE/4) #16 OR #12 OR 5 Stage Model ore Rod iameter losed Length Retracted T-6.75-XX /5.50/4.50/3.50/ /5.00/4.00/3.00/ ,700 (STROKE/5) #8 OR #6 OR T-8.25-XX /6.75/5.50/4.50/ /6.25/5.00/4.00/ ,800 (STROKE/5) #10 OR #8 OR T-9.75-XX /8.25/6.75/5.50/ /7.50/6.25/5.00/ ,700 (STROKE/5) #12 OR #10 OR * ctual load may be limited based on final configuration. ll Specifications are subject to change without notice. STNR OULE TING TELESOPI YLINERS

6 STNR TELESOPI MOUNTS SEE ROSS TUE HRT FOR WITHS E ross Tube levis ore Width ase End Minimum Recommended Length Equal to the smallest cylinder shaft diameter ore E * ll measurements are in inches Measurements for and are in inches. E Tang ore * ll measurements are in inches. Tang with earing ore E * ll measurements are in inches STNR TELESOPI MOUNTS

7 E F Flange ore Trunnion ore E F * ll measurements are in inches * ll measurements are in inches USTOM TELESOPI MOUNTS In addition to standard mounting options, RM will design and/or manufacture custom mounts in a wide array of styles and materials. We can also offer unique mounting locations, mid barrel or on each stage, for additional support. ontact the RM engineering team today and let them help you select the best option for your application. USTOM TELESOPI MOUNTS

8