PIPE NIPPLES. Welded Pipe Nipples - Black & Galvanized. q Approved q Approved as noted q Not approved. Standard Schedule 40, XH Schedule 80
|
|
- Stewart Barnett
- 6 years ago
- Views:
Transcription
1 Welded Nipples - Black & Galvanized Standard Schedule 40, XH Schedule 80 q FIG. 9: Standard Black Schedule 40 q FIG. 8: Extra Heavy Black Schedule 80 q FIG. 4: Standard Galv. Schedule 40 q FIG. 42: Extra Heavy Galv. Schedule 80 Specifications Dimensions: ASTM A7 (See table below for standard sizes) Threads: NPT per ASME B.20. Material: ASTM A5 Welded Steel Finish: Black, Hot Dip Galvanized, or Zinc Electroplated Standard and Extra Heavy Right and Left Nipples available in /8" - 4" diameter and 4" or 6" lengths. See Special Design Nipples on page 5 for more information. OUTSIDE DIAMETER TOLERANCES PIPE SIZE /8" - /2" 2" - 8" LENGTH ± /6" TOL. ±/64 ± % OF NOMINAL O.D. Nipples over 2" long have a length tolerance of +/- 8". O.D. Length Close Nipple Lengths in in in Note: Other lengths available upon request. 8" available as POA - contact your Anvil Representative for details. Project: Address: Contractor: Engineer: Submittal Date: Notes : Notes 2: PF-.6 PROJECT INFORMATION APPROVAL STAMP q Approved q Approved as noted q Not approved Remarks:
2 Specifications Unless otherwise specified welded nipples ASTM A 5 are furnished on orders for steel nipples in standard and extra strong sizes 8" 8" NPS (6 200 DN). Welded steel nipples (A 5 Type F or Type E) are available in standard and extra strong sizes 8" 8" NPS (6 200 DN), right hand threads, black or galvanized. Seamless nipples manufactured for the U.S. and International markets are not phosphate coated. Seamless nipples manufactured for Canada are phosphate coated. Seamless steel pressure tube nipples (ASTM A 06 Grade B) are available in standard and extra strong sizes 8" 8" NPS (6 200 DN) with right hand threads, black only. Right and left steel nipples are available in standard and extra heavy weight sizes 8" 4" NPS (8 50 DN), in 4" (02mm) and 6" (52mm) lengths. Nipples are available from stock in 8" 8" NPS (6 200 DN) diameter, close to 2 NPS (00 DN) in length. s " 24" NPS ( DN). (Prices on application.) Steel pipe nipples meet ASTM A7. 8" Schedule 40 and 80 galvanized nipples are all electroplated. Identification Where possible, each seamless pipe nipple is identified with the following: A trade mark Seamless designation SMLS schedule 40, 80, 60, XXS Material designation Heat number for traceability Standards and Specifications Dimensions Material Thread Federal/Other PIPE NIPPLES Steel - Welded ASTM A7 ASTM A5 Type F or Type E ASME B.20. WWN 5 Steel - Seamless (High Temp.) ASTM A7 ASTM A06 Gr. B ASME B.20. WWN 5 Brass ASTM B687 ASTM B4 ASME B.20. WWN 5 PF-.6
3 Steel Nipples Welded Ready Cut Standard Schedule 40 A ASSORTMENTS Mixed Cartons (Black Figure 9 & Galvanized Figure 4) 66 PACKS OR ASSORTED 6 CARTONS Black Figure 9 & Galvanized Figure 4 Close ½" 2" 2½" " ½" 4" 4½" 5" 5½" 6" HANDY PACK ASSORTMENTS Mixed Cartons (Black Figure 9 & Galvanized Figure 4) Close ½" 2" 2½" " ½" 4" 4½" 5" 5½" 6" Close ½" 2" 2½" " ½" 4" 4½" 5" 5½" 6" PF-.6
4 Steel Nipples Welded Ready Cut Standard Schedule 40, XH Sch. 80 SINGLE RUN PACKS Black Figure 9 & Galvanized Figure 4 SINGLE RUN PACKS Black Only Extra Heavy Figure 8 Close ½" 2" 2½" " ½" 4" 4½" 5" 5½" 6" Close ½" 2" 2½" " ½" 4" 4½" 5" 5½" 6" READY CUT PIPE Black Extra Long Figure 9 & Galvanized Figure 4 8" 24" 0" 6" 42" 48" 54" 60" 66" 72" TRAVEL TRAYS Black Figure 9 & Galvanized Figure 4 Close ½" 2" 2½" " ½" 4" 4½" 5" 5½" 6" PF-.6
5 Special Design Nipples Beck Nipples are available with a variety of options for customization. To order, begin by selecting the figure number, material, finish, and end treatments from the table below. Then, select the nominal pipe size and specify the length rounded to the nearest /6". Contact your Anvil Representative for additional options. Fig No. Description Material Finish End # End #2 NPS Length Sch. 40 Seamless Nipple A ASTM A06 GR B A Plain with Zinc Phosphate Coating A NPT A NPT 8 20SD 4 Special Design B ASTM A B Plain with Sandblasted Surface B PLN B PLN 8 Sch. 40 Seamless Nipple - A ASTM A06 GR B A Hot Dip Galvanized per ASTM A5 C PSQ C PSQ 2 0SD Galvanized B ASTM A B Zinc Electroplated per ASTM B6 D PDB D PDB 4 Special Design - - C Zinc Electroplated with Yellow Chromate E ROE E ROE Up to 24" 4 Maximum XH/Sch. 80 Seamless Nipple A ASTM A06 GR B A Plain with Zinc Phosphate Coating F BEV F BEV 2 25SD Specify to the Special Design B ASTM A B Plain with Sandblasted Surface G NPL G NPL 2 nearest 6" 2 2 XH/Sch. 80 Seamless Nipple - A ASTM A06 GR B A Hot Dip Galvanized per ASTM A5 H NPM H NPM 5SD Galvanized B ASTM A B Zinc Electroplated per ASTM B6 I ISO I ISO 4 Special Design - - C Zinc Electroplated with Yellow Chromate J GRV J GRV 5 Sch. 60 Seamless Nipple A ASTM A06 GR B A Plain with Zinc Phosphate Coating K LHT K LHT 6 26SD Special Design B ASTM A B Plain with Sandblasted Surface End Codes Sch. 60 Seamless Nipple - A ASTM A06 GR B A Hot Dip Galvanized per ASTM A5 Standard NPT Thread per NPT SD Galvanized B ASTM A B Zinc Electroplated per ASTM B6 ASME B.20. (RH) (TOE) Special Design - - C Zinc Electroplated with Yellow Chromate PLN Plain End/Roller Cut XXH Seamless Nipple A ASTM A06 GR B A Plain with Zinc Phosphate Coating PSQ Plain End with Square or Saw Cut 27SD Special Design B ASTM A B Plain with Sandblasted Surface Plain End with Square Cut PDB XXH Seamless Nipple - A ASTM A06 GR B A Hot Dip Galvanized per ASTM A5 and Deburred 29SD Galvanized B ASTM A B Zinc Electroplated per ASTM B6 Ream One End - Square Cut ROE Special Design - - C Zinc Electroplated with Yellow Chromate End with Ream Sch. 40 Welded Nipple A ASTM A5, Type F, CW A Plain with Zinc Phosphate Coating BEV Square Cut End with 7 9SD 2 Bevel Special Design B ASTM A5, Type E, EW B Plain with Sandblasted Surface NPSL Straight Thread per ASME NPL Sch. 40 Welded Nipple - A ASTM A5, Type F, CW A Hot Dip Galvanized per ASTM A5 B.20. (Locknut) (Toe) 4SD Galvanized B ASTM A5, Type E, EW B Zinc Electroplated per ASTM B6 NPSM Straight Thread per ASME NPM Special Design - - C Zinc Electroplated with Yellow Chromate B..20. (Mechanical) (Toe) XH/Sch. 80 Welded Nipple A ASTM A5, Type F, CW A Plain with Zinc Phosphate Coating ISO ISO/BSPT Taper Threads per ISO 7/ 8SD Special Design B ASTM A5, Type E, EW B Plain with Sandblasted Surface GRV Cut Grooved End per Anvil Specification XH/Sch. 80 Welded Nipple - A ASTM A5, Type F, CW A Hot Dip Galvanized per ASTM A5 NPT-LH / Left Handed NPT Thread LHT 42SD Galvanized B ASTM A5, Type E, EW B Zinc Electroplated per ASTM B6 per ASME B..20. (TOE) Special Design - - C Zinc Electroplated with Yellow Chromate 4SD A Plain with Zinc Phosphate Coating Tank Nipple - Sch. 40 B Plain with Sandblasted Surface Welded A ASTM A5, Type E, EW C Zinc Electroplated per ASTM B6 Special Design D Zinc Electroplated with Yellow Chromate 44SD A Plain with Zinc Phosphate Coating **Butt Nipple - Sch. 40 A ASTM A5, Type F, CW B Plain with Sandblasted Surface Welded C Zinc Electroplated per ASTM B6 Special Design B ASTM A5, Type E, EW D Zinc Electroplated with Yellow Chromate A Plain with Zinc Phosphate Coating 45SD Mining Nipple - Sch. 40 B Plain with Sandblasted Surface Welded A ASTM A5, Type E, EW C Zinc Electroplated per ASTM B6 Special Design D Zinc Electroplated with Yellow Chromate Special Design Seamless Nipple A Plain 62SD A ASTM B4 Brass Brass & Chromium Plated Brass B Chrome Plated Special Design Grooved Adapter A Plain 6SD A ASTM B4 Brass Nipple - Aluminum & Brass B Chrome Plated ** NPS and lengths available POA, upon request. Contact your Anvil Representative for details. PF-.6
6 Special Design Nipples TANK NIPPLES FIG. 4SD - Black & Galvanized All Tank Nipples ship in quantities of 25. Not intended for pressure service. Description Length Weight Tank Nipples are recommended for use as tank legs, not intended for pressure service. Tank Nipples have standard NPT threads on one end and straight NPSM threads running for 4" on the other end. Tank Nipples are fabricated from ASTM A5 Schedule 40 welded pipe BUTT NIPPLES FIG. 44SD - Black & Galvanized Description Butt Nipples are intended for joining couplings or female threaded components end to end without exposing male threads. Butt Nipples have standard NPT male threads on both ends. Threads may have fewer imperfect threads due to reduced nipple length. Butt Nipples are fabricated from ASTM A5 Schedule 40 welded pipe. Length Weight Quantity RIGHT & LEFT NIPPLES Black Figure 9SD & Galvanized Figure 4SD Length Weight Quantity 8 4" or 6" " or 6" " or 6" " or 6" " or 6" " or 6" " or 6" " or 6" " or 6" " or 6".50-4" or 6" " or 6" " or 6".24 - General Assembly of Threaded Fittings ) Inspect both male and female components prior to assembly. Threads should be free from mechanical damage, dirt, chips and excess cutting oil. Clean or replace components as necessary. 2) Application of thread sealant Use a thread sealant that is fast drying, sets-up to a semi hard condition and is vibration resistant. Alternately, an anaerobic sealant may be utilized. Thoroughly mix the thread sealant prior to application. Apply a thick even coat to the male threads only. Best application is achieved with a brush stiff enough to force sealant down to the root of the threads. ) Joint Makeup For sizes up to and including 2" pipe, wrench tight makeup is considered three full turns past handtight. Handtight engagement for 2" through 2" thread varies from 4 2 turns to 5 turns. For 2 2" through 4" sizes, wrench tight makeup is considered two full turns past handtight. Handtight engagement for 2 2" through 4" thread varies from 5 2 turns to 6 4 turns. PF-.6
Full Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationCAST IRON THREADED FITTINGS
q IGUR 59 Size lack NPS N NPS N NPS N in mm in mm in mm in mm in mm in mm lbs kg /4 8 /6 7 /6 7 /6 22 /8 29 /8 29 /8 29 0.57 0.26 /2 5 /2 5 /8 0 /6 7 /6 7 /4 9 /8 29 /8 29 /8 29 0.57 0.26 /4 20 /6 22 /6
More informationMANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
More informationProduct Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationDomestic Steel Pipe List Price Sheet Feb 10, 2019
21' Black Threaded & Coupled (T&C) ASTM A-53 Type F Sch. 40 CW Pipe Nominal WT / FT WT / PC FT / BD PCS / BDL WT / BDL List / PC List / FT *1/4 0.42 8.82 504 24 212 $179.22 $8.534 *3/8 0.56 11.76 378 18
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More information03/02/16 TECH DATA SHEET Pipe Nipples
03/02/16 TECH DATA SHEET 20569 Pipe Nipples 2 Pipe Nipples 01 Company Profile Jinan Meide Casting Co. Ltd. was established in 1962. In the past decades, Jinan Meide has seized each opportunity to consolidate
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationDK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationPipe Fittings & Steel Nipples
Pipe Fittings & Steel Nipples www.anvilintl.com NOVEMER 20 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com UILDING CONNECTIONS THT LST For
More informationGROOVED COUPLINGS - STANDARD FLEXIBLE Model 101
GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 Available Sizes 1" through 12" (25 through ) Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationPipe Fittings & Steel Nipples
November 200 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com. Pipe Fittings & Steel Nipples U I L D I N G C O N N E C T I O N S T H T L
More informationB U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
More informationFIG Gruvlok Flanges
Gruvlok Flanges The Gruvlok Fig. 7012 Flange allows direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The two interlocking halves of the 2" thru 12" sizes of the
More informationGRUVLOK FITTINGS FOR GROOVED-END PIPE
GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These
More informationStandard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints 1
Designation: A 865 97 AMERICAN SOCIETY FOR TESTING AND MATERIALS 00 Barr Harbor Dr., est Conshohocken, PA 9428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Specification for
More informationCARBON STEEL PIPE - BUTTWELD
010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 8.00 6.09 16.40 14.28 1/4" 0.42 9.61 8.25 15.27 12.91 3/8" 0.57 10.98 9.52 16.91 14.39
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationMARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationA. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less.
SECTION 221513 - COMPRESSED-AIR PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less. 1.2
More informationJIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
More informationA GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationCAST IRON FITTINGS STANDARD
060-1 CAST IRON FITTINGS STANDARD ITEM 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 90 ELL 11.03 15.95 6.99 7.29 8.62 12.24 16.93 26.45 90 REDUCING ELL * 22.20 14.69 12.27 15.44 31.19 41.74 45 ELL 13.59 14.60
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationMechanical Piping.
Mechanical Piping www.anvilintl.com JULY 2016 For the most current product/pricing information on Anvil products, please visit our website at www.anvilintl.com BUILDING CNNECINS HA LAS For over 160 years,
More informationLubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
More informationANVIL MANAGEMENT TEAM NORTH EAST REGION SOUTH EAST REGION IONAL, INC.
PF-0.02 NVIL PRODUCT LINES The Largest and Most Complete Fitting and Hanger Manufacturer in the World CORE MRKETS From plumbing, mechanical, and fire protection, to mining, oil and gas, and OEMs, our
More informationProduct Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More informationStainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)
The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless
More informationFIG Gruvlok Flange Adapter
FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method
More informationSnap-tite E / EA-Series
Snap-tite E / EA-Series eneral Purpose and Vacuum Couplings eaturing... Snap-tite quality with superior pressure and flow characteristics over the competition. Snap-tite's EA Series quick disconnect coupling
More informationApproved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
More informationGS-90 FLARE FLANGE SYSTEM
FLARING AND INSTALLATION INSTRUCTIONS GS-90 FLARE FLANGE SYSTEM REVISION JANUARY 2015 GS-90 GS-90 FLARE FLANGE SYSTEM Flaring and Installation Instructions Table of contents Introduction 3 Selection of
More informationUNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL
UNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL TEL: 0121 778 6001 FAX: 0121 778 6002 EMAIL: sales@astonfittings.com WEBSITE: www.astonfittings.com QUALITY POLICY The directors of Aston
More informationCarbon Steel Nipples
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
More informationForged Steel Fittings CLASS 3000 THREADED
Forged Steel Fittings CLASS 3000 THREADED NPS 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 DN 6 8 10 15 20 25 32 40 50 65 80 100 90 0 ELBOWS A in 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75
More informationPrice Sheet PCE129 Effective: December 7, 2009 Cancels Price Sheet PCE068 of June 2, 2008
Quality Product for Quality People BECK Pipe Couplings Price Sheet PCE129 Effective: December 7, 2009 Cancels Price Sheet PCE068 of June 2, 2008 NOTE: Subject to change without notice. Visit our Web site
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More informationListings and Approvals. G5 QR Gasket culus QR G5 SR Gasket culus, FM SR G5
Model Series Sprinklers Available with Solid, Perforated, or Gasket Standard Coverage, Concealed Pendent K2.8, 4.2, 5.6, & 8.0 (40, 60, 80, & 115 metric) Features Flat concealed cover plate available solid
More informationFlush Head Self Clinching Studs
SB Flush Head Self Clinching Studs Features Provide permanent male threads in sheets as thin as.040 (1.00mm). Ribbed self-clinching design mounts flush on the back of the sheet while transferring excellent
More informationCONFIGURATION OF CABLE SUPPORT SYSTEMs
CONFIGURATION OF CABLE s CABLE TRUNKING Page 4 - page 7 CABLE TRAY Page 8 - page 11 CABLE LADDER Page 12 - page 14 3 SS249/ IEC 61084 COMPLIED STEEL SURFACE CABLE TRUNKING CEE PRODUCT CODE SS-CEE 6 3 (#)
More informationFIRE SPRINKLER EQUIPMENT SUBMITTAL
Fire Systems West, Inc. 206 FRONTAGE ROAD NORTH, SUITE C PACIFIC, WA 98047 (253) 833-1248 FIRE SPRINKLER EQUIPMENT SUBMITTAL FOR Being 4-20-21 VPAL MAINTENANCE SHED AND SUBSTATION FSW JOB NO. 02-11-11013
More informationTotaiyo Steel Industry トタイヨ 鉄鋼業界. Manufacturers of Pipe Fittings
Y IS R QUALIT AS O D 'S RE G TE L LY S U RA NC E ISO Totaiyo Steel Industry トタイヨ 鉄鋼業界 Manufacturers of Pipe Fittings 900 PROFILE The Company TOTAIYO is the brand name of the flange, fittings manufacturing
More informationHAMMER UNIONS AND SWIVEL JOINTS. Sara Sae
HAMMER UNIONS AND SWIVEL JOINTS Sara Sae Quality and Innovation Sara manufactures a diverse range of oilfield equipment in its manufacturing facility in India, using the latest design techniques and CNC
More informationGS-37 FLARE FLANGE SYSTEM
FLARING AND INSTALLATION INSTRUCTIONS GS-37 FLARE FLANGE SYSTEM REVISION FEBRUARY 2016 GS-37 GS-37 FLARE FLANGE SYSTEM Flaring and Installation Instructions Table of contents Introduction 3 GS-37 Connection
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable ductile
More informationPLAIN RING THREAD RING TRUNCATED SET PLUG TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG TAPER PIPE PLUG REVERSIBLE PLAIN PLUG REVERSIBLE THREAD PLUG
THREAD RING TRUNCATED SET PLUG TAPER PIPE PLUG REVERSIBLE THREAD PLUG REVERSIBLE TRILOCK THREAD PLUG PLAIN RING TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG REVERSIBLE PLAIN PLUG REVERSIBLE TRILOCK PLAIN
More informationFlexible Sprinkler Connections
SuperFlex is the ultimate solution in flexible fire sprinkler drops. No need to measure or count the number of bends, no leaks, no worries! SuperFlex provides all the flexibility needed for an error free
More informationINSTRUCTIONS, (FORD) SUPER DUTY INSTALLATION KIT (C2 PICKUP LIFTGATES)
LIFT CORPORATION Sht. 1 of 22 DSG# M-16-32 Rev. - Date: 12/13/16 INSTRUCTIONS, (FORD) SUPER DUTY INSTALLATION KIT (C2 PICKUP LIFTGATES) FORD SUPER DUTY F-250, F-350 & F-450 PICKUP TRUCKS, 2017 MODEL KIT
More informationPiping Material Specification - Piping class : CS101
Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE
More informationBENTELER Distribution. Pipe solutions to the petrochemical and power generation sectors
BENTELER Distribution Pipe solutions to the petrochemical and power generation sectors About us BENTELER Distribution is an internationally operating stockholding and processing company of steel tubes
More informationFASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
More informationKing Lai Hygienic Materials Co., Ltd. CDA/ Bulk Gas / UHP Gas Delivery System
King Lai Hygienic Materials Co., Ltd. CDA/ Bulk Gas / UHP Gas Delivery System Introduction 1 King Lai Standard and Specifications 2 Cleaning & Packaging Process Tube & Pipe 34 56 TUBE PIPE ASTM PIPE JIS
More informationStyle 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
More informationFasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationClass 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
More informationSTEEL PIPE NIPPLES - WELDED Price Sheet PNW-7.18 Effective: July 16, 2018 Cancels Price Sheet PNW-3.18 of March 5, 2018
STEEL PIPE NIPPLES - WELDED Price Sheet PNW-7.18 Effective: July 16, 2018 Cancels Price Sheet PNW-3.18 of March 5, 2018 FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationCouplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationBOSS STEEL Metal Reference Book Version 9
Intro BOSS STEEL Metal Reference Book Version 9 This ninth edition of the Boss Steel Metal Reference Book has been designed to inform and assist you in making the right decision when it comes to acquiring
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationPROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationGS 90 Flare Flange System Flaring and Installation Instructions
Flaring and Installation Instructions 2 GS FLANGE SYSTEM Table of contents page Introduction...3 Selection of the pipe...4 Cutting of the pipe...5 Cleaning operations before flaring...6 Clamping the pipe...6
More informationHook & Eye Turnbuckles
Hook & Eye Turnbuckles HG-225 Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4 through 1, a shackle one size
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationDelivery program. Carbon steel and stainless steel tubes in a wide range of qualities and dimensions. Distribution
Delivery program Carbon steel and stainless steel tubes in a wide range of qualities and dimensions Distribution Our value proposition The reliable supply of high-quality steel tubes and customized service
More informationPIPES, PIPE FITTINGS VALVES & FLANGES
PIPES, PIPE FITTINGS VALVES & FLANGES 2 About the Company Atlas Commercial Company (Kwt.) W.L.L was established in 1962, and is part of the Boodai group of companies. Atlas is one of the oldest companies
More informationInstallation and Maintenance Instructions for Morin MRP Pneumatic Rack and Pinion Actuators
for Morin MRP Pneumatic Rack and Pinion Actuators Introduction The Morin MRP Pneumatic Actuator is a compact, rack & pinion design, conforming to Keystone standard or direct mount standards or EN ISO 5211
More informationSPEAKMAN. SE-675 Installation, Operation, and Maintenance Instructions SAFE-T-ZONE EMERGENCY SHOWER AND EYE/FACE WASH
SE-675 Installation, Operation, and Maintenance Instructions SAFE-T-ZONE EMERGENCY SHOWER AND EYE/FACE WASH DESCRIPTION Floor mounted emergency deluge shower and non-aerated eye/face wash combination unit.
More informationINTRODUCTION. General Notes
INTRODUCTION Thank you for selecting a Shurjoint product. This manual covers the proper installation and assembly procedures for your product. To ensure the proper installation, assembly and performance
More informationUNIVERSAL FORGED STEEL ANVILETS
Standard uttweld RNH UTTWELD Standard Weight Weight NPS DN in mm in mm in mm lbs kg NPS DN in mm in mm in mm lbs kg 6 5 6 25 0.625 6 0.0 0.05 4 00 2 5 5 7 4.45 05 4.2.87 8 5 6 25 0.625 6 0.0 0.05 6 50
More informationCooper & Turner Ltd STRUCTURAL
Cooper & Turner Ltd STRUCTURAL Page 1 of 6 Dimensions of Fully Threaded Bolts/Setscrews CHARACTERISTIC STANDARD Thread d M12 M16 M20 M24 M30 M36 p (pitch) 1.75 2 2.5 3 3.5 4 a max. 5.3 6 7.5 9 10.5 12
More informationChlorine Valves and Accessories
Chlorine Valves and Accessories Chlorine Cylinder & Ton Container Valves Standard Chlorine Institute Design & Alternate Design 1 ALTERNATE VALVE DESIGN vs. STANDARD CHLORINE INSTITUTE VALVE DESIGN FOR
More informationPressfit System for Carbon Steel Pipe
R PRESSFIT SYSTEM FOR ARBON STEEL PIPE Pressfit System for arbon Steel Pipe 12.02 VITALI IS AN ISO 9001 ERTIFIED OMPANY PRODT DESRIPTION L FM L See Victaulic publication 10.01 for details. The Pressfit
More informationSmooth Flow TUBING & FITTINGS SPECIFICATIONS
Smooth Flow TUBING & FITTINGS SPECIFICATIONS 2 Index INDEX TUBING...3 Standard Elbows & Bends Bending Capabilities...4 Standard Radius Elbows...5 Short Radius Elbows...5 Standard Long Radius Bends...6
More informationWELD PLATE GAUGE TOOL INSTRUCTIONS
WELD PLATE GAUGE TOOL INSTRUCTIONS Introduction The weld plate gauge tool has been developed in order to verify that upon reception and installation of the weld plate they are within acceptable tolerance.
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
ARBON STL PIP - GROOVD FITTINGS Grooved nd Fittings S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles.
More informationSection 5 AIR - COOLED CONDENSING UNITS MODEL PC 05Z TO PC NOMINAL COOLING CAPACITY RANGE 56.6 TO 772 MBH
AIR - COOLED CONDENSING UNITS MODEL PC 05Z TO PC 80-01 NOMINAL COOLING CAPACITY RANGE 56.6 TO 772 MBH 14 FEATURES MODEL PC 05Z TO PC 30-02 CABINET: Cabinets are constructed of heavily zinc coated galvanized
More informationREQUEST PUBLICATION 18.11
* SEE VICTALIC PBLICATION 10.01 FOR DETAILS The Victaulic Pressfit 316 System for joining approved Type 316/316L stainless steel pipe provides a fast, easy, clean, reliable means for joining ½"/15, ¾"/
More informationVision. Contacts. A cleaner world, one project at a time
API 5L CW PIPE In 1984, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American brands and companies.
More informationDRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
More information030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50
030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 Pipe Fitter Handbook Another Anvil Advantage Mini-catalog Installation Procedures Technical Data Copyright 2001 by Anvil International, Inc.
More informationCOMPRESSION COUPLINGS Exclusive Design Features Outer Shell and Bar Washer The unique design provides an equalized pressure seal.
1-800--1 The only economical couplings available to connect (or repair) threaded or unthreaded pipe or tubing of any size f rom 1/ thru including metric sizes and a rare oneof-a-kind size tubing. COMPRESSION
More informationManual No: Revision: F. Mag Probe Assembly Manual
Manual No: 576013-730 Revision: F Mag Probe Assembly Manual Notice Veeder-Root makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranties of merchantability
More informationGENERAL-SERVICE COMPRESSED-AIR PIPING SECTION GENERAL-SERVICE COMPRESSED-AIR PIPING PART 1 - GENERAL
13686.00 GENERAL-SERVICE COMPRESSED-AIR PIPING 221513-1 SECTION 22 1513 - GENERAL-SERVICE COMPRESSED-AIR PIPING 1.1 RELATED DOCUMENTS PART 1 - GENERAL A. Drawings and general provisions of the Contract,
More informationChampion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Flame Shield and bridge hangers for electrical and mechanical markets.
Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Flame Shield and bridge hangers for electrical and mechanical markets. Champion Fiberglass began production of epoxy fiberglass
More information