SE Encore Multimount Worm Gear Speed Reducers

Transcription

1 S ncore Worm ear Speed Reducers VILL IN 24 HOURS! Winuard lack poxy Coating System Quill Input daptor Solid Output Shaft(s) (Standard Diameter) Hollow Output Shafts (Max Standard ore) ushing Kits ase Kits racket Kits Helical or Worm ear Ratio Multiplier MULTIMOUNT PRODUCT NOMNCLTUR OVRVIW SIZ (Center Distance) MODL RTIO SSMLY DSINTION QUILL INPUT DPTOR STNDRD HOLLOW OUTPUT SHT OR SIZS " MDNS 5 Solid Output Shaft 56C 13 - N " MDSS 10 R - Right 140TC " " 15 L - Left 180TC " " 20 LR - Left & Right 210TC " " " " 30 Hollow Output Shaft " " 40 DLR Left & Right " " " 60 S ncore Worm ear Speed Reducers Table of Contents Ratings Summary Selection by Input Horsepower MDNS Model Information MDSSModel Information ccessory Kits Hollow Output Shaft ushings Quill Input Shaft ushings Hollow Shaft Covers Mounting Kits Worm on Top Worm on ottom Vertical Input lange Output Hanger racket Torque rm Industry Interchange ase Plate Worm ear Ratio Multiplier Selection by Input Horsepower MDDS Model Information Helical ear Ratio Multiplier MHDS Model Information MHDS Ratings S NCOR MULTIMOUNT WORM R SPD RDUCRS S ncore worm gear speed reducers are supplied as a component system consisting of a hollow or solid output shaft universal mount reducer and one or more accessory kits (if needed). The combination creates a quickly and easily configurable set of product offerings and reduction combinations. S ncore worm gear speed reducers are available in most common ratios with quill input adaptors. lso available are Worm and Helical ear Ratio Multipliers. These reducers can function as stand alone products or when used in combination with a universal mount reducer, they dramatically expand the torque and reduction capabilities of the S ncore product line. ll S ncore worm gear speed reducers are filled to a single lubricant level, designed such that the speed reducer can be successfully operated in any mounting position without adjusting the lubricant level. dditionally, the S ncore worm gear speed reducer can be sealed during operation in many intermittent applications, but each is also supplied with an easy optional open-close vent kit for heavy or continuous duty applications.* ll S ncore speed reducers can be shipped from Winsmith within 24 hours. 2D DRWINS & 3D MODLS *See ppendix section of this catalog for more details. 9

2 S ncore Worm ear Speed Reducers MULTIMOUNT CONIURTION PROCDUR SIZ Identify the three digit nomenclature for size appearing in the selection pages of this catalog section. xample: 1HP input, 30:1 gear reduction, 1750 RPM, 1.25 service factor yields a 2.375" center distance speed reducer. The nomenclature for the size of this reducer is 24. MODL Identify one of two universal mount speed reducer models that are available as part of the component system: ach is identified in the table below and at the top of the corresponding dimension page in this section by a complete description and by the four letter (e.g. MDNS) model nomenclature. MODL MDNS MDSS MDDS MHDS MODL DSCRIPTION Quill input adaptor, solid output shaft Quill input adaptor, hollow output shaft Worm ear Ratio Multiplier Quill input adaptor, flanged with solid output shaft Helical ear Ratio Multiplier Quill input flange, flanged with solid output shaft RTIO Identify the required ratio in full format (i.e. 30:1), or in brief format (i.e. 30). SSMLY Identify the relative position of the input shaft and the output shaft for a reducer. The dimension pages of this section contain the possible selections for each speed reducer size. xample: The nomenclature for an MDNS with right-hand and left-hand standard output shaft extensions is LR. QUILL INPUT DPTOR S ncore products are assembled with NM 56C, 140TC, 180TC, or 210TC compatible input MULTIMOUNT PRODUCT NOMNCLTUR XMPLS adaptors.** The dimension pages in this section contain the possible selections for each speed reducer size. HOLLOW OUTPUT SHT OR SIZ Identify the hollow output shaft bore size of an MDSS using the tables on page 15 of this section. xpress the bore size as a decimal (xample = 1.438"). Specify a Hollow Output Shaft ushing Kit (page 16) to accommodate a wide variety of output shaft requirements. These kits are shipped with the speed reducer and require assembly. WORM ND HLICL R RTIO MULTIPIRS Worm and Helical ear Ratio Multipliers offer an expedient method of easily creating multiple stage ratio reductions by using them in combination with any universal mount reducer. oth have a machined register output adaptor that is machined to a NM tolerance of inches providing a precision interface with the driven equipment. This can be very useful especially in motion control applications. The Worm ear Ratio Multiplier is available in standard reductions of 5:1 to 60:1 and is configurable as either a left (L) or a right (R) assembly. The Helical Worm ear Multiplier is available in 5:1 and 6:1 reductions. oth are equipped with a quill input adaptor and a solid output shaft. See page 25 for nomenclature information. CCSSORY KITS The available accessory kits described in the section of the catalog (see Kits starting on page 16) can be combined with a universal mount reducer. These add-on items are identified either as a description or by a kit part number. n accessory kit specification should follow the universal mount reducer specifications. When adding a Worm ear Ratio Multiplier or a Helical ear Ratio Multiplier, specify these as an accessory kit. xample: To include a kit on an 20 MDNS that allows vertical mounting of the input shaft, the specification would be, vertical input, bracket mount kit (also known as mount), or the kit number K SIZ MODL RTIO SSMLY QUILL INPUT HOLLOW CCSSORY DPTOR OUTPUT SHT KIT OR SIZ COMPLT NOMNCLTUR 20 MDNS 50 L 56C Vertical Input 20 MDNS 50 L 56C K racket Mount 24 MDSS 60 DLR 56C 1.500" Output ushing Kit 24 MDSS 60 DLR 56C 1.500" Output ushing for 1.000" ore for 1.000" Output ore 26 MDNS 10 R 140TC Horizontal Output, 26 MDNS 10:1 R 140TC Horizontal racket Mount Output racket 30 MDSS 5 DLR 180TC 1.938" Worm on Top, ase Mount 30 MDSS 5 DLR 180TC 1.938" ase Kit 20 MDNS 30 L 56C 206, 5:1 Helical 20 MDNS 30 L 56C with Helical 206, 5:1 Multiplier *See venting section of this catalog for more details. **or some 56C and 180TC assemblies, an input adaptor bushing may be supplied to accommodate the correct motor shaft requirement. 10 2D DRWINS & 3D MODLS

3 Ratings Summary INPUT MOTOR HORSPOWR ND TORQU RTINS (lbf in.) T 1750 RPM INPUT RDUCR SIZ RTIO OUTPUT RPM RTINS T 1750 RPM INPUT SRVIC CTOR* Page # HP Torque Page # HP Torque Page # HP Torque Page # HP Torque Page # HP Torque Page # HP Torque Page # HP Torque Page # HP Torque INPUT HORSPOWR ND TORQU RTINS (lbf in.) T 1160 RPM INPUT RDUCR SIZ RTIO OUTPUT RPM RTINS T 1160 RPM INPUT SRVIC CTOR* Page # HP Torque Page # HP Torque Page # HP Torque Page # HP Torque Page # HP Torque Page # HP Torque Page # HP Torque Page # HP Torque Note: or ratings of 1.25 service factors and 1.50 service factors, please refer to page 160 of the Ratings section. * or thermal limit ratings of 1.25 service factors and 1.50 service factors, please contact Winsmith. 1. xact ratio 2. If input speed is below 1160 RPM, please specify speed and mounting position to ensure proper lubrication. Mechanical ratings shaded above exceed speed reducer thermal limitations under continuous duty conditions. Refer to ppendix (page 229) for Continuous Duty Thermal Limit Ratings. See Ratings Summary (page 160) for additional ratios. 2D DRWINS & 3D MODLS 11

4 Selection y Input Horsepower RDUCR SIZ ND TORQU (lbf in.) T 1750 RPM INPUT 2 OUTPUT RTIO 1 HP RPM INPUT HORSPOWR 1.00 SRVIC CTOR SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU RDUCR SIZ ND TORQU (lbf in.) T 1750 RPM INPUT 2 OUTPUT RTIO 1 HP RPM INPUT HORSPOWR SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU xact ratio 2. If input speed is below 1160 RPM, please specify speed and mounting position to ensure proper lubrication. Mechanical ratings shaded above exceed speed reducer thermal limitations under continuous duty conditions. Refer to ppendix (page 229) for Continuous Duty Thermal Limit Ratings SRVIC CTOR 12 2D DRWINS & 3D MODLS

5 Selection y Input Horsepower RDUCR SIZ ND TORQU (lbf in.) T 1750 RPM INPUT 2 OUTPUT RTIO 1 HP RPM INPUT HORSPOWR 1.50 SRVIC CTOR SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU xact ratio 2. If input speed is below 1160 RPM, please specify speed and mounting position to ensure proper lubrication. MODL QUILL INPUT DDITIONL DPTOR SIZS STNDRD RTIOS 13 56C, 140TC 4; C, 140TC 4; 7.5; 80; C, 140TC 4; 7.5; 80; C, 140TC, 180TC 4; 7.5; 80; C, 140TC, 180TC 4; 7.5; 80; C, 140TC, 180TC 4; 7.5; 80; C, 140TC, 180TC 4; 7.5; 80; C, 140TC, 180TC, 210TC 4; 7.5; 80; 100 or additional standard ratios see rating page D DRWINS & 3D MODLS 13

6 MDNS Model Information Universal Quill Input daptor Solid Output Shaft Housing Mount L ssembly LR ssembly R ssembly DIMNSIONS L M 1 H Tap 1 Depth 1 1 See table for input shaft bore & keyway size DI (4) HOLS K D T T O D C 1 W W INPUT DPTOR DIMNSIONS (in.) INPUT DPT. DIM. 56C-140TC H Tap Depth 56C 140TC 180TC 210TC DI S P P S K D KYWY 3/16 X 3/32 1/4 X 1/8 5/16 X 5/ OR SPD RDUCR DIMNSIONS (in.) Size C 1 D 1 M1 1 H M1 M1 OUTPUT SHT L 56C DPTH DPTH TP O P 140TC 180TC 210TC W* S T KYWY lb / N N /16 X 3/ / N N /4 X 1/ / N N /4 X 1/ / N /4 X 1/ / N /4 X 1/ / N /16 X 5/ / N /8 X 3/ / /2 X 1/4 155 * Shaft diameter tolerances C adaptor only pproximate shipping weights Dimensions shown are for construction purposes only. Please contact Winsmith for certified dimension sheets. 14 2D DRWINS & 3D MODLS

7 MDSS Model Information Universal Quill Input daptor Hollow Output Shaft Housing Mount DLR ssembly DIMNSIONS H Tap 1 Depth L 1 1 M 1 See table for input shaft bore & keyway size DI (4) HOLS D K O D C 1 DI W Z INPUT DPTOR DIMNSIONS (in.) INPUT DPT. DIM. SPD RDUCR DIMNSIONS (in.) 56C-140TC H Tap Depth 56C 140TC 180TC 210TC K D KYWY 3/16 X 3/32 1/4 X 1/8 5/16 X 5/ OR HOLLOW OUTPUT SHT ORS (S)STNDRD OR () USHIN W** KYWY /8 3/16 X 3/ /4 3/16 X 3/ /8 3/16 X 3/ /4 X 1/8 S /8 1/4 X 1/ /16 1/4 X 1/ /4 1/4 X 1/ /8 5/16 X 5/32 * /16 3/8 X 3/16 S /2 3/8 X 3/16 S /8 3/8 X 3/ /16 3/8 X 3/16 S /4 3/8 X 3/ /8 1/2 X 1/4 * /16 1/2 X 1/4 S /2 X 1/4 * /16 1/2 X 1/4 S /4 1/2 X 1/ /16 5/8 X 5/ /4 5/8 X 5/16 S **ore tolerances TWO puller slots opposed on all hollow output Shafts * ore size on size 20: keyway is 3/8 X 1/8 * ore size on size 30: keyway is 1/2 X 3/16 * ore size on size 35: keyway is 1/2 X 1/8 M1 Size C 1 D 1 H M1 M1 1 DPTH K L 56C DPTH TP O P Z 140TC 180TC 210TC / N N / N N / N / N / N / N / pproximate shipping weights Dimensions shown are for construction purposes only. Please contact Winsmith for certified dimension sheets. K P K P 2 set screws at 65 apart each end lb. 2D DRWINS & 3D MODLS 15

8 Hollow Output Shaft ushing Kits Cast ore ushing Kit TYP (C) (2) Cast ore ushings Keyed ushing Kit TYP (K) (1) Keyed ushing (1) Plain ushing (2) Drive Keys Slotted ushing Kit TYP (S) (1) Slotted ushing (1) Plain ushing (1) Drive Key HOLLOW SHT USHIN CHRT SIZ USHIN DRIVN USHIN DRIVN SHT KIT I.D. SHT O.D. LNTH KYWY TYP KIT# SIZ USHIN DRIVN USHIN DRIVN SHT KIT I.D. SHT O.D. LNTH KYWY TYP KIT# /8 3/16 X 3/32 S WK /4 3/16 X 3/32 S WK STNDRD OR - NO USHIN RQUIRD** 0.630* * C WK /4 3/16 X 3/32 K WK /8 3/16 X 3/32 K WK /4 X 1/8 K WK /8 1/4 X 1/8 S WK /16 1/4 X 1/8 S WK /4 1/4 X 1/8 S WK STNDRD OR - NO USHIN RQUIRD** 0.750* * C WK /4 X 1/8 S WK /8 1/4 X 1/8 S WK / /4 X 1/8 S WK /4 1/4 X 1/8 S WK /8 5/16 X 5/32 S WK /16 3/8 X 3/16 S WK STNDRD OR - NO USHIN RQUIRD** 0.880* * C WK /4 X 1/8 K WK /8 1/4 X 1/8 K WK /16 1/4 X 1/8 S WK /16 3/8 X 3/16 S WK /4 1/4 X 1/8 S WK /8 5/16 X 5/32 S WK /2 3/8 X 3/16 S WK * * C WK /4 1/4 X 1/8 K WK /8 5/16 X 5/32 S WK /16 C2.00 3/8 X 3/16 S WK /2 3/8 X 3/16 S WK /16 3/8 X 3/16 S WK /4 3/8 X 3/16 S WK STNDRD OR - NO USHIN RQUIRD** 1.000* * C WK /4 1/4 X 1/8 K WK /16 3/8 X 3/16 S WK / /8 X 3/16 S WK /4 3/8 X 3/16 S WK /16 1/2 X 1/4 S WK /2 X 1/4 S WK STNDRD OR - NO USHIN RQUIRD** 1.500* * C WK /2 3/8 X 3/16 K WK /4 3/8 X 3/16 S WK /8 1/2 X 1/4 S WK /16 1/2 X 1/4 S WK /8 X 5/16 K WK /16 1/2 X 1/4 S WK /4 1/2 X 1/4 S WK /16 5/8 X 5/16 S WK /2 5/8 X 5/16 S WK STNDRD OR - NO USHIN RQUIRD** STNDRD OR - NO USHIN RQUIRD** S = ushing uses a step key *Rough bore size, bushing to be customer bored and keyed **ore tolerances D DRWINS & 3D MODLS

9 Quill Input Shaft ushing Kits 1 Piece ushing 2 Piece ushing MOTOR LN (SHT DIMTR) RDUCR INPUT DPTOR (OR SIZ) USHIN LNTH KYWY SIZ TYP KIT # 56C (0.625) 140TC (0.875) /16 X 3/32 1 PIC WK TC (0.875) 180TC (1.125) /16 X 3/32 2 PIC WK Hollow Shaft Cover D COVR INSTLLTION TOOL (OPTIONL) PPLY SLNT S ncore shaft covers provide an economical method for protecting the rotating shaft and isolating the seal from outside contaminants. ll shaft covers are made from corrosion resistant stainless steel and fit over either shaft end while allowing at least one half inch of clearance for a driven shaft keeper plate. DIMNSIONS SIZ D Parts Included in Cover Kit: Cover olt and Washer Installation Instructions KIT PRT NUMRS SIZ COVR INSTLLTION TOOL* 17 CKIT917 CTKIT CKIT920 CTKIT CKIT924 CTKIT CKIT926 CTKIT CKIT930 CTKIT CKIT935 CTKIT CKIT943 CTKIT943 *Optional available separately 2D DRWINS & 3D MODLS 17

10 Worm on Top Mounting Kits Worm on Top (T) Quill Input daptor Solid & Hollow Output Shafts ase Mount MDNS Shown With Mounted (T) ase Kit Solid Output Shaft ase Supplied Separately MDSS Shown With Mounted (T) ase Kit Hollow Output Shaft H DI (4) HOLS ase Supplied Separately H DI (4) HOLS SPD RDUCR DIMNSIONS (in.) Size H Kit # 13* K K K K K K K K * Not available in MDSS hollow output pproximate shipping weights Kit lb. 18 2D DRWINS & 3D MODLS

11 Worm on ottom Mounting Kits Worm on ottom () Quill Input daptor Solid & Hollow Output Shafts ase Mount MDNS Shown With Mounted () ase Kit Solid Output Shaft C 1 D ase Supplied Separately MDSS Shown With Mounted () ase Kit Hollow Output Shaft H DI (4) HOLS C 1 D ase Supplied Separately H DI (4) HOLS SPD RDUCR DIMNSIONS (in.) Size C 1 D H Kit# 13* K K K K K K K K * Not available in MDSS hollow output. pproximate shipping weights Kit lb. 2D DRWINS & 3D MODLS 19

12 Vertical Input Mounting Kits Vertical () Quill Input daptor Solid & Hollow Output Shafts racket Mount MDNS Shown With Mounted () racket Kit Solid Output Shaft L 1 /L 2 racket Supplied Separately MDSS Shown With Mounted () racket Kit HollowOutput Shaft / 2 1 H DI (4) HOLS L 1 /L / 2 1 H DI (4) HOLS racket Supplied Separately SPD RDUCR DIMNSIONS (in.) H Size DI. L 1 1 L 2 13* K K K K K K K K * Not available in MDSS hollow output pproximate shipping weights L2 and 2 dimensions apply when using top (2) mounting holes on bracket 2 Kit # Kit lb. 20 2D DRWINS & 3D MODLS

13 lange Output Mounting Kits lange (U) Quill Input daptor Solid & Hollow Output Shafts racket Mount MDNS Shown With Mounted (U) racket Kit Solid Output Shaft DI OLT CIRCL 2 3 D DI 1 racket Supplied Separately MDSS Shown With Mounted (U) racket Kit Hollow Output Shaft DI OLT CIRCL H DI (4) HOLS Y 2 3 D DI 1 racket Supplied Separately H DI (4) HOLS Y SPD RDUCR DIMNSIONS (in.) Size D H Y Kit# K K K K K K K pproximate shipping weights Kit lb. 2D DRWINS & 3D MODLS 21

14 Hanger Mounting Kits Hanger (H) Quill Input daptor Solid& Hollow Output Shafts racket Mount MDNS Shown With Mounted (H) racket Kit Solid Output Shaft 1 D O C 1 racket Supplied Separately MDSS Shown With Mounted (H) racket Kit Hollow Output Shaft H DI (4) HOLS 1 D O C 1 racket Supplied Separately H DI (4) HOLS SPD RDUCR DIMNSIONS (in.) Size C 1 D 1 H O Kit# K K K K K K pproximate shipping weights Kit lb. 22 2D DRWINS & 3D MODLS

15 Torque rm Mounting Kits Torque rm (R) Quill Input daptor Hollow Output Shaft racket Mount MDSS Shown With Mounted (R) racket Kit Hollow Output Shaft X racket Supplied Separately 1 Q 2 Q 1 H DI (2) HOLS I Q 1 The torque arm must be mounted at an angle of 90 ± 20 to an imaginary center line drawn between the center of the output shaft bore and the center of the torque arm eye bolt. The torque arm must be in tension. Y1 S Y SPD RDUCR DIMNSIONS (in.) I I Size 1 H MIN MX Q 1 Q 2 S Y Y 1 X Kit# TQ TQ TQ TQ TQ TQ TQ pproximate shipping weights Kit lb. 2D DRWINS & 3D MODLS 23

16 Industry Interchange ase Plate Interchange (C) Quill Input daptor Solid and Hollow Output Shafts ase Mount The industry interchange base mount adapts the S ncore series to the mounting of many other industrial speed reducers. Industry interchange base mounts are either flat (most 17 and all 24) or formed (13, 17, 26 43). ll Industry Interchange ase Mount Kits include attachment bolts. MDNS SHOWN WITH INTRCHN (C) S MOUNT KIT SOLID OUTPUT SHT C * Interchange Plate Supplied Separately WINSMITH SIZ WINSMITH CNTR DISTNC CNTR DISTNC INTRCHN OUTPUT SHT HIHT OLT MOUNTIN PTTRN S PLT DIMNSIONS C S MOUNT KIT PRT NUMR " 1.33" 2.25" 3.31" 4.38" 4.19" 5.50".25".50" K " 1.50" 2.50" 4.31" 5.25" 5.50" 6.44".375".375" K " 1.75" 2.75" 4.50" 5.75" 5.69" 7.00".25".625" K " 2.00" 3.00" 4.69" 6.38" 5.94" 8.00".313".875" K " 2.06" 3.00" 4.69" 6.38" 5.94" 8.00".313".875" K " 2.38" 3.25" 4.88" 7.06" 6.00" 8.50".375".375" K " 2.62" 3.69" 5.25" 8.00" 6.50" 9.63".25".562" K " 3.25" 4.38" 6.13" 9.50" 7.50" 11.19".375".875" K " 3.50" 4.38" 6.13" 9.50" 7.50" 11.19".375".875" K " 3.75" 4.81" 7.00" 10.38" 9.00" 12.00".375".813" K D DRWINS & 3D MODLS

17 Worm ear Ratio Multiplier The Worm ear Ratio Multiplier features a quill input adaptor along with a machined register output flange and shaft that duplicate NM C face flange/shaft dimensions. The following combinations are available: Sizes 13 and 17 are available with NM 56C output flange/shaft dimensions and NM 56C or 140TC input adaptor dimensions.* Sizes 17, 20, 24, and 26 are available with NM 140TC output flange/shaft dimensions and NM 56C, 140TC, or 180TC input adaptor dimensions.* Register diameter is machined to a NM tolerance of inches, providing a precision interface with the driven equipment, which can be very useful especially in motion control applications. vailable in 5, 10, 15, 20, 25, 30, 40, 50, and 60 ratios and configurable as either a left (L) or a right (R) assembly. Completely self-contained ratio multiplier and includes an open-close vent, Mobil lygoyle 460 lubricant, and the Winuard poxy Coating System. Coupling the Worm ear Ratio Multiplier to the input of another NM C face reducer provides additional reduction. It also offers an easy method of creating a double reduction reducer on location or when mounting to another piece of NM C face equipment such as a brake or a clutch. Various assemblies can be created by mounting it in any one of four positions. MULTIMOUNT WORM R RTIO MULTIPLIR NOMNCLTUR OVRVIW SIZ (Center Distance) MODL RTIO " MDDS 5 Solid Output Shaft 56C 56C " 10 R - Right 140TC 140TC " 15 L - Left 180TC 180TC " " 25 * or 42C and 48C input adaptor, please contact Winsmith SSMLY DSINTION QUILL INPUT DPTOR OUTPUT LN 2D DRWINS & 3D MODLS 25

18 Selection y Input Horsepower RDUCR SIZ ND TORQU (lbf in.) T 1750 RPM INPUT SRVIC CTOR OUTPUT INPUT HORSPOWR RTIO 1 HP RPM SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU RDUCR SIZ ND TORQU (lbf in.) T 1750 RPM INPUT 2 OUTPUT RTIO 1 HP RPM INPUT HORSPOWR 1.25 SRVIC CTOR SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU SIZ TORQU xact ratio 2. If input speed is below 1160 RPM, please specify speed and mounting position to ensure proper lubrication. 26 2D DRWINS & 3D MODLS

19 MDDS Model Worm ear Ratio Multiplier Quill Input daptor Solid Output Shaft lange Mount NM 4.50 inch diameter register * ssembly R shown, ssembly L available DIMNSIONS L M 1 P See table for input shaft bore & keyway size K S T O D H Tap Depth DI.C. RTIO MULTIPLIR DIMNSIONS (in.) C Output Size 1 K ** C 1 D H rame DI. K KK L M 1 O P W* S T DPTH TP K D K 1 DI W 1 KK DI (4) HOLS KYWY lb C / /16 X 3/ C / /16 X 3/ TC / /16 X 3/ TC / /16 X 3/ TC / /16 X 3/ TC / /16 X 3/32 52 * Shaft diameter tolerances Dimensions shown are for construction purposes only. Please contact Winsmith for certified dimension sheets. pproximate shipping weights ** Register diameter tolerances Catalog output torque limited to 575 lbf in. Catalog output torque limited to 1578 lbf in. INPUT DPTOR DIMNSIONS (in.) INPUT DPT. DIM. 56C 140TC 180TC K D D KYWY 3/16 X 3/32 1/4 X 1/ OR * See pages for an inch diameter register of the Worm ear Ratio Multiplier. 2D DRWINS & 3D MODLS 27

20 Helical ear Ratio Multiplier The Helical ear Ratio Multiplier features a quill input flange along with a machined register output flange and shaft that duplicate NM C face flange and shaft dimensions. The following combinations are available: Size 206 is available with a NM 140TC input flange and a inch, registered (140TC) output flange and shaft. Size 320 is available with a NM 180TC input flange and an inch (180TC) output flange and shaft. Register diameter is machined to a NM tolerance of inches, providing a precision interface with the driven equipment, which can be very useful especially in motion control applications. vailable with 5.07 and 6.08 ratios. Completely self-contained ratio multiplier and includes an open-close vent, Mobilgear 600 XP 220 Oil and the Winuard poxy Coating System. Coupling the Helical ear Ratio Multiplier to the input of another NM C face reducer provides additional reduction. It also offers an easy method of creating a double reduction reducer on location or when mounting to another piece of NM C face equipment such as a brake or a clutch. 28 2D DRWINS & 3D MODLS

21 MHDS Model Helical ear Ratio Multiplier Quill Input lange Solid Output Shaft lange Mount NM 4.50 inch diameter register * DIMNSIONS DI M 1 S 1 H TP DPTH (4) HOLS T D K RTIO MULTIPLIR DIMNSIONS (in.) Size C 1 H M1 OUTPUT DPTOR M1 K 56C DPTH O 140TC 180TC W* S T KYWY 1 K 1 1 lb / N /16 X 3/ / /4 X 1/ * Shaft diameter tolerances pproximate shipping weights DI (4) HOLS S TL OR INPUT SHT ND KYWY SIZ K W K 1 C 1 O 1 RTIO MULTIPLIR RTINS RTIO (NOMINL) INPUT RPM 2.06 CNTR DISTNC 3.20 INPUT HP OUTPUT INPUT HP OUTPUT TORQU TORQU INPUT LN DIMNSIONS (in.) INPUT LN DIM. 56C 140TC 180TC K D KYWY 3/16 X 3/32 1/4 X 1/ OR D DRWINS & 3D MODLS 29