A SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications
|
|
|
- Elfreda Gardner
- 5 years ago
- Views:
Transcription
1 A SRIS Double-Acting Pneumatic Valve Actuator Designed & engineered for severe-service applications
2 Service and support A SRIS Design & Materials Barrel Seals Nitrile O -ring standard. High or low temp optional Piston Packing Nitrile U Cup standard. High and Low Temp optional. Piston Aluminum Steel with wearband on 7 and above Barrel High strength carbon fiber composite standard. Aluminum, Steel or Stainless Steel optional land Bushing Cartridge type SA 660 bronze standard. Delrin and cast iron optional Flange Mounting Hole ISO/ MSS Flange mounting holes See Actuator Dimensions Page for details Piston Rod Steel SA 1045, ground, hard chrome plated & polished 316 and 17-4 PH Stainless steel available as an option Temperature Ratings Low Temp. Seals -54 C to 90 C Standard Seals -20 C to 104 C High Temp. Seals -10 C to 200 C Tie-Rod Rod Wiper To prevent contamination inside the cylinder Material Breakdown STANDARD Corrosion Resistant AWWA Head & Cap Steel SS 316 Cad Plated Barrel Composite Composite Composite Piston Aluminum (4-8 ) & Steel (10 and above) Steel Cad Plated Piston Rod AISI 1045 SS 316 SS 316 land SA 660 Delrin Delrin Tie Rod 4-10 AISI 1045 SS 316 SS 316 Tie Rod 12 & Above AISI 1045 SS 17-4 PH SS 17-4 PH Head & Cap ASTM A-36 hot rolled steel. Stainless Steel available as an option land Packing Nitrile U -cup standard. High or low temp optional land Seal Nitrile O -ring with a backup ring standard High or low temp optional
3 Double-Acting Hydraulic Manual Override Overview and Operation Pump handle is inserted here Directional hand valve DV Double acting pump PBX SRIS 250 & reservoir Output Pneumatic Hydraulic Tube Booster Hydraulic Cylinder Hydraulic ball valve BV to freewheel the hydraulic cylinder Hydraulic Override Layout Hydraulic Schematic OPRATION Actuator Normal Operation: Open ball valve BV and ensure directional valve DV is not centered. The hydraulic override cylinder free-wheels (cylinder pulls and pushes oil from and to the hydraulic reservoir freely through directional valve DV) Actuator Override Operation: 1. Close ball valve BV 2. Insert pump actuation handle and operate, pump operates during both handle strokes. Directional valve DV determines direction of travel of hydraulic override cylinder. 3. Return to normal operation by opening ball valve BV IMPORTANT: Never close ball valve BV or position directional valve DV in mid position during normal operation.
4 A Series Single nded (d) AA NPT PORT DB KK xa deep (b) B PBX SRIS MM B 250 Output Pneumatic Booster T NOTS: a- 4" TO 7" BOR ONLY b- 8" TO 26" BOR ONLY c- FOR MOUNTIN MX1, MX2, MX3 d- WAR BAND FOR 10" BOR AND OVR K V J H + STROK LB + STROK (a) BD W (c) BB T Actuator Dimensions BOR A AA B BB BD DB UNF B NPT H J K KK LB MM T V W /8 9/16 3/ x ¼ / x /16 3/4 1/ x ¼ / x /16 7/8 1/ x ¼ / x /16 ½ 5/ x 3/ / x /16 x 5/ / / /16 x 3/ ½ /16 x 3/ ½ /16 x 7/ ½ /8 x / / /4 x 1-1/ / / x 1-1/ / / /4 x 1-1/ / / /2 x 1-1/ / / /2 x 1-1/ / /32 2-1/
5 A Series Single nded Optional Flange Mounting Dims ISOAND MSS MOUNTIN FLAN ye Bolts F C HIHT DIAMTR PBX SRIS Output Pneumatic A Booster B1 C1 OF BOLTS, D1 THRADS 1 DP ON F1 P.C.D. XX Y BOLT DIMNSIONS FOR 12" TO 42" BOR MSS Flange Mounting Dimensions (in) MSS FLAN MAX.THRUST (lbs.) A1 B1 C1 D1 1 F1 FA07 4, / / FA10 9, / / FA14 25, / / FA16 35, / / FA25 50, / / FA30 75, / / FA35 140, ¼ FA40 230, ¼-7 1½ ISO Flange Mounting Dimensions (in) ISO FLAN MAX. THRUST (lbs.) A1 B1 C1 D1 1 F1 F07 4, M8 7/ F10 8, M10 5/ F14 22, M16 3/ F16 33, M20 7/ F25 44, M16 7/ F30 73, M20 7/ F35 157, M30 7/ F40 247, M36 7/ ye bolt mounting holes BOR XX C F / / /9 3 ½ /9 3 ½ /9 3 ½ /9 3 7/ /9 3 7/ /9 3 7/ /3 4 1/ /3 4 1/ /9 6 ¼
6 A Series Double nded (d) (b) B DB AA NPT PORT PBX SRIS 250 Output Pneumatic Booster MM B T K NOT: A- 4 TO 7 BOR ONLY B- 8 TO 26 BOR ONLY C- FOR MOUNTIN MX1, MX2, MX3 D- WAR BAND FOR 10 BOR AND OVR (a) BD H + STROK LD + STROK V W (c) BB T Actuator Dimensions BOR A AA B BB BD DB UNF B NPT H K KK LD MM T V W /8 9/16 3/ x ¼ / x /16 3/4 1/ x ¼ / x /16 7/8 1/ x ¼ / x /16 ½ 5/ x 3/ / x /16 x 5/ / / /16 x 3/ ½ /16 x 3/ ½ /16 x 7/ ½ /8 x / / /4 x 1-1/ / / x 1-1/ / / /4 x 1-1/ / / /2 x 1-1/ / / /2 x 1-1/ / /32 2-1/
7 Actuator Dimensions Large Bore T B R PBX SRIS 250 Output Pneumatic Booster W T R T B A1 A B1 DB T BB BB BOR Code letter Actuator Dimensions (in) A AA B BB DB B H J K KK LB+Stroke (single stage) MM V W R T TF T 28 F x1 1/ / /32 2 1/4-12UN x 30 I x1 1/ ½NP /32 2 1/4-12UN x 32 J x1 1/ ½NP /32 2 3/4-12UN x 36 Q x1 1/ ½NP / UN U x1 1/ ½NP / UN
8 A Series Tandem (d) KK xa deep PBX SRIS 250 Output Pneumatic Booster MM B K J H + STROK LT + (STROK x 2) H + STROK LD + STROK (a) BD V W (c) BB Actuator Dimensions BOR LT MM
9 How to Order SRIS A - Standard AC* - Corrosion Resistant *See page 2 for details BOR SIZ H - 4 K - 5 L - 6 M - 7 N - 8 P - 10 R - 12 APPLICATION MOD - Omit if none required T3 - Triple Seal land with R2 P2 - Magnetic piston S5 - Hydraulic use (150 PSI) W1 - AWWA Cylinder (See Page 2 ) List application mods alpha numerically S - 14 T - 16 W - 18 X - 20 A - 22 Y - 24 B - 26 F - 28 I - 30 J - 32 Q - 36 V - 42 SALS N - Standard Seals F - High Temp L - Low Temp ROD DIAMTR /8 H - 1 3/4 J - 2 K - 2 1/2 L - 3 M - 3 1/2 N - 4 S - 5 1/2 PBX SRIS 250 Output PORTS Pneumatic Booster NXX - NPT TXX - BSPT **XX denotes position ex: 12 = Pos 1 head, Pos 2 Cap ROD ND A4 - Series A Female CUSHIONS 8 - none MOUNTINS X1 - tie rods extended b.e. (MX1) X3 - tie rods extended h.e. (MX3) X2 - tie rods extended c.e. (MX2) X0 - standard (MX0) IS - ISO mounting flange MS - MSS mounting flange DOUBL ROD DIA Omit if not required D2-1 DL2-3 D2-1 3/8 DM2-3 1/2 DH2-1 3/4 DW2-4 DJ2-2 DS2-5 1/2 DK2-2 ½ 2nd ROD ND Omit if not required RA4 - Series A Female MODS - Omit if none required A# - Thread extensions ex: A2.50 = A = 2.50 C1 - poxy Paint (Do not specify with C2) M2 - Stainless Steel tie rods (Do not specify with W1 or AC) M3 - Stainless Steel piston rod (Do not specify with W1 or AC) M7 - Steel Barrel TC - Tandem Cylinders (Rods attached) W# - Rod xtension ex: W2.50 = W = 2.50 Modifications to be listed alpha numerically after the stroke # ex:and2a4ra48t3nn11x012.0a2.50c1w5.50 XAMPL A Series 8 Bore 1 Rod Series A Female rod end Non Cushioned 1 Double Rod A N A4 8 D2 RA4 T3 N N11 X A2.50 Thread xtensions Stroke Standard Mounting (MX0) NPTF Pos 1 Both ends Standard Seals T3 Triple Seal land Series A Female 2nd rod end XAMPL WITH AUTOMATION OPTIONS Automated Cylinder A Series 8 Bore Z A N A4 8 X0 /00##### Unique Number assigned by Cowan Online PN Configurator Standard mounting (MX0) Non Cushioned Series A Female rod end 1 Rod
10 Service and support Published November 1, 2017 Related materials Visit our website to download or request a printed catalogue. Solutions Include: Valve Actuators Fail-Safe Systems Digital Process Control Panels Pneumatic Process Control Panels For sales and technical information, Contact us at: Head Office/Factory: 6194 Notre Dame West Montreal, Quebec H4C 1V4 TOLL-FR: Sales Office: 211 Watline Ave, Unit 205 Mississauga, Ontario L4Z 1P3 T: TOLL-FR: /cowandynamics /company/cowan-dynamics /cowandynamics /+cowandynamics
ML SERIES. Double-Acting Hydraulic Valve Actuator. Thrusts up to 1,500,000 lbs SIL-3 Capable GT3 Triple Seal Gland for Severe Service Applications
Actuation Solutions and Systems for the World s Most Challenging nvironments ML SRIS Double-Acting Hydraulic Valve Actuator Designed & ngineered for Severe-Service Applications Thrusts up to 1,500,000
RP SERIES 200 psi Mill-type Cylinder
Actuation Solutions and Systems for the SERIES 200 psi Mill-type Cylinder Delivering superior long-term performance and value Designed and engineered for severe-service applications Bore Size: 2 to 20
CSY SERIES. Pneumatic Rotary. Actuator. Double-Acting or Spring-Return Torques up to 2,500,000 in-lb Modular Design
CSY SERIES Pneumatic Rotary Actuator Designed & engineered for severe-service applications Double-Acting or -Return Torques up to 2,500,000 in-lb Modular Design Design & Materials NAMUR Mounting Allows
SERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)
BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
Provenair Series AN Cylinders Parts List / Service Instructions
Provenair Series AN Cylinders Parts List / Service Instructions 1-1/2, 2, 2-1/2, 3-1/4 and 4 BORES EXTRUDED BARREL CONSTRUCTION 5, 6, 8 and 10 BORES TIE ROD CONSTRUCTION TYPE: Aluminum, repairable, square
ASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
Series 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
Series HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
Series HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
Heavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
Series HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
Discharge oil capacity cm Discharge oil capacity. Max. stroke volume on retraction Remarks.
2 High Power Systems High Power Systems 3 Working pneumatic pressure range MPa 0.2 to 0.2 to 0.7 0.2 to 0.7 0.2 to 0.7 0.2 to 0.7 Boosting ratio Theoretical output oil pressure at max. working pneumatic
S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
Tie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
UT SERIES PNEUMATIC ROTARY ACTUATORS
UT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
Series AM/MM/WM Mill Type Cylinders
ET AH To order this part, call Lifco Hydraulics USA Toll Free at -00-- S S ZE* SS* SW (TYP) FB THRU, () PLACES TE UF WA / EE P* ØE EE P* CD 00 M CW S Series AM/MM/WM Mill Type Cylinders Table of Contents
FULL COLOR TAB #6 TC 105
FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
The Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
Optimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
Series OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
MT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
Series VH Hydraulic Cylinders
Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
Scotch Yoke Actuators 2016 EDITION. Heavy Duty Pneumatic Actuators SHD and CHD series. The Best Way To Automate Your Process.
The Best Way To Automate Your Process Heavy Duty Pneumatic Actuators SHD and CHD series Scotch Yoke Actuators 2016 EDITION Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Tel: +1.636.272.4934
Heavy Duty Bench Top Presses
Heavy Duty Bench Top Presses Model: BTP-501 (FOR SINGLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Model: BTP-502 (FOR TRA TRIPLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Heavy Duty Bench Top Press shown
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
Double acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS
SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the
THD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs
CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and
Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
AIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION
compact cylinders, standardised to ISO 21287 compatibility for assembly ISO 15552 mountings double acting - Series 449 short stroke cylinders single acting / double acting Series 441 AIR CYLINDERS cylinders
Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable
N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder
Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
The friction free alternative
Rolling The Rolling Diaphragm Air Cylinder The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of the ControlAir Diaphragm Air Cylinder.
LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51
Non-Lube Air Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...52 Ordering Information...53 Specifications...54 Basic Dimensions...55 Mounting Options...56 Spring Data...57 Rod Options...58
HYDRAULIC HEAVY DUTY
Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
Active and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Page Overview 51-52 Standard cylinder with Active brake 53-56 Plain bearing SLIDELINE with Active brake 33-34 Aluminium roller guide PROLINE
Active and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Data Sheet No. Page Overview P-1.42.001E 69-70 Standard cylinder with Active brake P-1.42.002E 71-74 Plain bearing SLIDELINE with Active brake
FA SERIES KNIFE GATE PNEUMATIC CYLINDERS... 8
FA SERIES KNIFE GATE PNEUMATIC CYLINDERS......... 8 section 8 154 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Dimensional Information FA SERIES DIMENSIONS BASIC DIMENSIONS PLUS
NFPA Double acting imperial cylinders
> > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" How to Order. Nil. Air cushion. Both ends. Nil. None N H R. Head end Rod end 400 (4") NCA1-L400 NCA1-F400
NFPA Interchangeable Cylinder: Standard Type Double Acting, Single Rod (Medium Duty) Series NCA1 Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" Built-in magnet Nil None D W/ auto switch (Magnetic piston) Style
Stainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
Tie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)
Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with
Linear Thrusters/PneuMoment
/PneuMoment Extruded TE Series (Composite Bearings) 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic
MH SERIES METRIC HYDRAULIC CYLINDERS. Specials are Our Standard. ISO standard 6020/2-160 bar series For working pressures up to 210 bar
ISO 00 RISTRD Specials are Our Standard MH NPA MX MH NPA MX MH NPA MX2 ISO MX ISO MX ISO MX2 MH SRIS MH MH MH NPA ISO M M NPA ISO M M NPA ISO M2 MS2 MTRIC HDRAULIC CLINDRS MH NPA ISO MS2 MP MH2 NPA ISO
Series MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72
Series MH MH MH2 MH ISO MX ISO MX ISO MX2 MH MH MH ISO M ISO M ISO M2 MH MH2 MH ISO MP ISO MP ISO MP MH MH2 MH ISO MT ISO MT2 ISO MT Double Rod nd NPA MDX Milwaukee Cylinder Series MH ISO Metric Hydraulic
Cylinders ISO Bores from 32 to 125 mm
Cylinders ISO 5552 ores from 32 to 25 mm Double acting Standard executions Version Profile Tube Symbol Type STANDARD MAGNETIC AMA AMT For the magnetic reed switches type ASV and ASC see from page.0.. For
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Bimba 304 stainless steel body
ISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
Linear Thrusters/PneuMoment
/PneuMoment Extruded TE Series 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic Actuators PneuMoment
Heavy Duty 3500/5000. psi rating. series. hydraulic cylinders. bulletin 0207XH
3500/5000 psi rating Heavy Duty series XH hydraulic cylinders bulletin 0207XH www.royalcylinders.com 1 Contents Page Description 1 Contents 2 Features Description Mounting Dimensions 3 C Clevis Mount 3
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Pneu-Moment Bimba Pneu-Moment
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders
Rodless cylinders. Standard magnetic version. High reliability and long lifetime. Low friction and good resistance to loads
Rodless cylinders Standard magnetic version High reliability and long lifetime Low friction and good resistance to loads Installation in any position Mounting elements and switches can be ordered separately
The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS!
SERIES JHD HEAVY DUTY AIR CYLINDER The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS! The true test of a cylinder is how well it performs in your application.
Standard strokes (for all diameters) Stroke tolerance (ISO 15552)
Series 19-192 Cylinders according to standard ISO 12 COIHT Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C chromed steel
Cylinders with integrated guide Series QCTF and QCBF
> Series QCTF - QCBF slide units CATALOGUE > Release 8.6 Cylinders with integrated guide Series QCTF and QCBF Double-acting, magnetic, with double bearings and flanges ø 20, 25, 32, 40 mm Magnetic sensors
BI-DIRECTIONAL KNIFE GATE VALVE
Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm
KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
NEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
AWWA C504 - BUTTERFLY VALVES
License Number 6D-1724 AWWA C504 - BUTTRFLY VALVS License Number 6D-1724. Gate Valves Knife Gate Valves Ball Valves Check Valves Plug Valves Air Release Valves Oil and Gas Water and Sewage, Chemicals Paper
Biffi Morin HP Series actuator
HP series - Direct gas / hydraulic actuator with ductile iron housing and carbon steel cylinders Spring return and double acting actuators Quarter-trun output torques to 240,000 lb. in. Features and benefits
ISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
PURAKAL SERIES 100 TABLE OF CONTENTS
TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
SERIES MH (NFPA) CYLINDER
MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation
SERIES HH (NFPA) CYLINDER
HH SERIES TAB 5 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES HH (NFPA) CYLINDER HH Rod Lock Reduces cylinder drag and erratic
BALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
Series OCG Pneumatic Cylinders
The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN
ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,
F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200
Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:
Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System
SMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
Spring return pneumatic quarter-turn actuator for spring end torques to 685,500 lb.in.
Algas Spring Return Pneumatic Actuator Scotch Yoke Design Spring return pneumatic quarter-turn actuator for spring end torques to 685,500 lb.in. Features and benefits Scotch yoke design generates high
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series (Composite Bearings) 3.11-3.16 T Series (Ball Bearings) 3.17-3.22 Multiple Position 3.23-3.24 NEW T4 Series 3.25-3.28 Checklist 3.29 PneuMomentPneumatic Actuators
FULL COLOR TAB #1 TA 7
FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder
Tie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
Stainless Steel Cylinders DIN ISO 6431 and VDMA Bores from 32 to 200 mm
Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYP MAGNTIC STANDARD AMX STAINLSS STL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed
Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
Construction characteristics. Technical characteristics. End plates Rod Barrel Rod-guide bushing Piston
Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C3 chromed steel or stainless steel aluminium alloy anodised spheroid bronze
Masoneilan* 51/52/53 Series
Technical Specifications Rev.E - 01/2018 Masoneilan* 51/52/53 Series Cylinder Actuator BHGE Data Classification: Public Conversion Table All the USCS values are converted to metric values using the following
Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
aluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm)
Technical Data Versions for pneumatic linear drive: Series OSP-P aluminum guide carriage Roller Guide Powerslide Loads, Forces and Moments aluminum clamping rail hardened steel rail roller cover with wiper
ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.