Tie rods cylinders to ISO standard
|
|
|
- Homer Kennedy
- 5 years ago
- Views:
Transcription
1 Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643 standard. They re available from Ø 32 to Ø 200. These cylinders are supplied cushioned as standard and, in the version with magnetic piston type can be supplied with magnetic sensors. TECHNICAL DATA Operatin pressure 0 bar Working temperature C (-20 C with dry air) C with seals for high temperatures (-0 C with dry air) Fluid Filtered, unlubricated or continuous lubricated compressed air Versions Double acting; Single acting front spring; Single acting rear spring; Trough rod; Double push tandem; Double stroke tandem; Opposed tandem Bore Ø 32, 40, 50, 63, 80, 00, 25, 60, 200 Port size Ø 32 = G /8 Ø = G /4 Ø = G 3/8 Ø = G /2 Ø = G 3/4 Standard strokes (mm) 25, 50, 75, 80, 00, 25, 50, 60, 75, 200, 250, 300, 320, 350, 400, 450, 500, 550, 600, 650, 700, 800, 900, 000 Decelerators lenght Ø mm Max strokes (mm) Ø = 3000 Max strokes single act. (mm) Ø = 50; Ø = 00 MATERIALS End caps Alluminium alloy, cataphoresis-treated Cylinder barrel Ø 32 25: extruded profile, 20 µm anodized allumium alloy Ø : extruded tube, 20 µm anodized allumium alloy Tie rods, tie and rod nuts Steel Stainless steel (supplied upon request for tie rods and tie nuts) Piston rod C45 chromium-plated steel AISI 303 rolled stainles steel Piston rod bearing Bronze-Iron 20%, sintered, self-lubricating Decelerator ogives Alluminium alloy Piston NBR rubber block (supplied with and without magnet) Viton (supplied only without non-magnetic piston) Seals NBR rubber Viton ORDER KEY CPUI/ Bore Version Stroke Series Piston type Option Option 2 Option 3 Special option (supplied upon request) N.B.: Magnetic sensors FM 00 - FM57 - FM58 (see chapter magnetic sensors from page.93) See technical data on page 0.2 S VERSION / Double acting T Double push tandem S Single acting front spring Y Single acting rear spring R Through rod PISTON TYPE N Non-magnetic OPTION Z Fit for piston rod locking unit * OPTION 2 Stainless steel piston rod and rod nut 2 Seals for high temperatures** OPTION 3 5 Extruded profile barrel (only for Ø 25) *** Supplied from Ø 32 al Ø 25 *** Supplied only with non-magnetic piston type P Double stroke tandem V Opposed tandem M Magnetic 3 Stainless steel piston rod and rod nut and seals for high temperatures** ORDER EXAMPLES Cylinder Ø50, double acting, 00 mm stroke, magnetic piston type, fit for piston rod locking unit 50/00 CPUI/MZ Cylinder Ø63, through rod, 50 mm stroke, magnetic piston type, stainless steel piston rod 63R50 CPUI/M Cylinder Ø80, double push tandem, 50 mm stroke, magnetic piston type 80T50 CPUI/M Cylinder Ø80, double stroke tandem, 50 mm stroke + 00 mm stroke 2, magnetic piston type 80P50+00 CPUI/M Cylinder Ø80, opposed tandem, 50 mm stroke + 50 mm stroke 2, magnetic piston type, stainless steel piston rod 80V50+50 CPUI/M SPARE PARTS SEALS KIT Non-magnetic piston type NBR Ø/SG/CPUI/N Through rod, NBR Ø/SG/R/CPUI/N For high temperature Ø/SG/CPUI/N2 Through rod for high temperature Ø/SG/R/CPUI/N2 Magnetic piston type NBR Ø/SG/CPUI/M Through rod, NBR Ø/SG/R/CPUI/M Cylinders series CPUI.25
2 seriescpui Tie rods cylinders to ISO 5552 standard CPUI BASIC CYLINDER Detail of the front centering Ø 200 P.S.: Rod nuts supplied as standard DIMENSIONS AND WEIGHTS BASIC CYLINDER Ø A* BA* BG* CH RT* E* EE* G D KK* l l 2* l 8* O PL* R SW* TG* VA* B* M6 47 G / M0x, , M6 54 G / M2x, M8 65 G /4 32,5 20 M6x, , , M8 75 G 3/ M6x, , , M0 95 G 3/ M20x, M0 4 G / M20x, , M2 40 G / M27x M6 80 G 3/ M36x M6 220 G 3/ M36x * STANDARDIZED DIMENSIONS WB WH* WEIGHT INCREMENT (g) (g) every 0 mm THROUGH ROD P.S.: Rod nuts supplied as standard.26 Cylinders series CPUI
3 Tie rods cylinders to ISO 5552 standard seriescpui DOUBLE PUSH TANDEM P.S.: Rod nut supplied as standard DOUBLE TANDEM P.S.: Rod nut supplied as standard OPPOSED TANDEM 2 P.S.: Rod nuts supplied as standard FIT FOR PISTON ROD LOCKING UNIT P.S.: Rod nut supplied as standard Cylinders series CPUI.27
4 seriescpui Accessories Fixings for cylinders series X and series CPUI to ISO 5552 standard FLANGE - STEEL - CPUI/F Ø (supplied with screws) Ø D FB E MF R TF UF H H3 JS4 JS4 JS Ø W ZF WEIGHT (g) ZF + AVAILABLE IN AISI 36 STAINLESS STEEL FROM Ø 32 TO Ø 00, SCREWS EXCLUDED FOOT - STEEL - CPUI/PB Ø (supplied with screws) Ø AB AH AT AU E F SA H4 JS Ø TR XA WEIGHT JS4 (g) XA + SA + AVAILABLE IN AISI 36 STAINLESS STEEL FROM Ø 32 TO Ø 00, SCREWS EXCLUDED FRONT FEMALE HINGE - NOT CONFORM TO ISO STANDARD - ALUMINIUM - CPUI/CFA Ø (supplied with screws) Ø CB CD E FL L UB WEIGHT H9 h4 (g) Cylinders series X and CPUI
5 Accessories Fixings for cylinders series X and series CPUI to ISO 5552 standard seriescpui REAR FEMALE HINGE (Supplied with screws) Ø CB CD E FL L L4 UB H4 H9 h , , , , ALUMINIUM - CPUI/CF Ø - ALUMINIUM WITH BUSHINGS - CPUI/CF Ø B - STEEL - CPUI/CF Ø AC Ø XD WEIGHT WEIGHT ALL. (g) STEEL (g) AVAILABLE IN AISI 36 STAINLESS STEEL FROM Ø 32 TO Ø 25, SCREWS EXCLUDED XD + PIVOT FOR REAR FEMALE HINGE (ALUMINIUM) - STEEL - CPU/CPUI/SEC Ø (STEEL) - GALVANIZED NITRIDED STEEL - CPUI/SEC Ø AC Ø BU EK EL WEIGHT f7 (g) , ,5 978 AVAILABLE IN AISI 36 STAINLESS STEEL FROM Ø 32 TO Ø 25 MALE HINGE (Supplied with screws) - ALUMINIUM - CPUI/CM Ø - ALUMINIUM WITH BUSHINGS - CPUI/CM Ø B - STEEL - CPUI/CM Ø AC Ø CD E EW FL L L4 XD H , , , , Ø WEIGHT WEIGHT ALL. (g) STEEL (g) AVAILABLE IN AISI 36 STAINLESS STEEL FROM Ø 32 TO Ø 25, SCREWS EXCLUDED XD + Cylinders series X and CPUI.29
6 series CPUI Accessories Fixings for cylinders series X and series CPUI to ISO 5552 standard SQUARE JOINT - ALUMINIUM - CPUI/AS Ø - STEEL - CPUI/AS Ø AC (FOR Ø 32 25) Ø PH CK EM GL RA UR BT L5 JS5 H9 JS4 JS , , , , , , , Ø BR S5 K K2 XD WEIGHT WEIGHT H3 JS4 ALL. (g) STEEL (g) , , , , , AVAILABLE IN AISI 36 STAINLESS STEEL FROM Ø 32 TO Ø 25 XD + NARROW REAR FEMALE HINGE - ALUMINIUM - CPUI/CFS Ø (Supplied with screws) - STEEL - CPUI/CFS Ø AC (FOR Ø 32 25) Ø CG CP B3 Ø CF E FM L0 L D0 d2 F , , , , , , , , , , Ø L4 XD WEIGHT WEIGHT ALL. (g) STEEL (g) 32 5, , , , AVAILABLE IN AISI 36 STAINLESS STEEL FROM Ø 32 TO Ø 25, SCREWS EXCLUDED XD + NON-ROTATING PIVOT FOR NARROW REAR FEMALE HINGE - GALVANIZED NITRIDED STEEL - CPUI/SEC Ø AT Ø d4 ØJK L8 ES L9 L5 G WEIGHT H2 f7 (g) ,5 4, AVAILABLE IN AISI 36 STAINLESS STEEL FROM Ø 32 TO Ø Cylinders series X and CPUI
7 Accessories Fixings for cylinders series X and series CPUI to ISO 5552 standard series CPUI NARROW MALE HINGE WITH ARTICULATED HEAD (ISO 2240) - ALUMINIUM - CPUI/CMSS Ø (Supplied with screws) - STEEL - CPUI/CMSS Ø AC (FOR Ø 32 25) Ø ØCX E EN MS EU G DL H , , Ø L4 XD WEIGHT WEIGHT ALL. (g) ACC. (g) 32 5, , , , AVAILABLE IN AISI 36 STAINLESS STEEL FROM Ø 32 TO Ø 25, SCREWS EXCLUDED XD + SQUARE JOINT WITH ARTICULATED HEAD (ISO 2240) - STEEL- CPUI/ASSS Ø AC Ø CA BQ CK EM G G2 G3 H6 JS5 H7 JS4 JS , XD + Ø K K2 L5 R S5 XD WEIGHT JS4 H3 (g) ,6 5 6, ,6 8 6, , , , , ,2 40 3, AVAILABLE IN AISI 36 STAINLESS STEEL FROM Ø 32 TO Ø 25 FLOATING HINGE - STEEL - CPUI/CTA Ø (Supplied with screws) Ø L LA LB TD TL TM UW WEIGHT e9 h4 h4 (g) ,5 44, ,5 52, ,6 203, LB + Cylinders series X and CPUI.3
8 seriescpui Accessories Fixings for cylinders series X and series CPUI to ISO 5552 standard INTERMEDIATE HINGE - STEEL - EXTRUDED PROFILE - CPUI/CT Ø (Supplied with dowels) Ø M N TD TK TL TM UW XV XV WEIGHT ± 0,3 ± 0,3 e9 max h4 h4 max min max (g) 32 3, , , ,5 00, , , , , AVAILABLE IN AISI 36 STAINLESS STEEL FROM Ø 32 TO Ø 00, SCREWS EXCLUDED P.S.: ADJUSTABLE POSITION (fixing through dowels) ASSEMBLY: CPUI/CT Ø + cylinder series CPUI type M/CPUI/CT Ø XV max + INTERMEDIATE HINGE - STEEL - CLEAN PROFILE - X/CT Ø (Supplied with dowels) Ø TK TD TL TM UW UW2 XV XV WEIGHT e9 h4 0 /- 0,3 min max (g) , ,5 5, AVAILABLE IN AISI 36 STAINLESS STEEL FROM Ø 32 TO Ø 00 P.S.: ADJUSTABLE POSITION (fixing through dowels) ASSEMBLY: X/CT Ø + cylinder series X type M/X/CT Ø XV max + INTERMEDIATE HINGE - STEEL - EXTRUDED TUBE WITH TIE RODS - CX/CPUI/CT Ø (Supplied with dowels) Ø TK M TD TL TM UW XV e9 h4 h4 min , , , Ø XV WEIGHT max (g) P.S.: - FIXED POSITION (specify dimension XV, fixed on cylinder with completed threaded and galvanized tie rods type S6, see on page 0.2) - ADJUSTABLE POSITION (fixing through dowels) ASSEMBLY (FIXED): CX/CPUI/CT Ø + cylinders series CPUI S6 type MF/CX/CPUI/CT Ø XV max + SUPPORT FOR INTERMEDIATE HINGE - STEEL - CPUI/SCT Ø Ø A B B2 C d d2 FN F7 H ,5 2 6, , , Ø XA WEIGHT (g) Cylinders series X and CPUI
9 Accessories Piston rod locking unit for cylinders to ISO 5552 standard series WBZ DESCRIPTION Piston rod locking unit series WBZ is a mechanical device to fit on ISO 5552 cylinders (series X and CPUI); its function is to lock the piston rod in any position. This solution allows to lock the cylinder stroke each time that there s a pressure fall. Locking force is, in any case, higher than the force given off by the cylinder fed at 0 bar. It has static operation (cylinder piston rod not moving); it s necessary to preliminary stop the cylinder piston rod before proceeding with mechanical locking. Piston rod locking unit series WBZ must not be considered as a safety device. TECHNICAL DATA Release pressure 3 6 bar with cylinder feed pressure 0 0 bar Working temperature C (-5 C with dry air) Fluid Filtered, unlubricated or continuous lubricated compressed air Size 32, 40, 50, 63, 80, 00, 25 Port size Ø = G /8 Ø = G /4 Locking type Mechanical Only axial (bi-directional) Release Through pneumatic control Condition in absence Locked of pressure Locking force with Size static load N ORDER KEY Series Size ASSEMBLY WBZ WBZ + cylinder series X or CPUI, Z version M/WBZ MATERIALS Body Blades Pistons Seals Springs ORDER EXAMPLES Piston rod locking unit, size 50 WBZ50 Piston rod locking unit, size 80 + cylinder series CPUI Ø80, 50 mm stroke, fit for piston rod locking unit, non-magnetic piston type, ASSEMBLED: WBZ /50 CPUI/NZ + M/WBZ SPARE PARTS BLADES KIT PISTON KIT Anodized aluminium alloy Brass Acetal resin NBR rubber Steel Size/PM/WBZ Size/SG/WBZ WBZ PISTON ROD LOCKING UNIT DIMENSIONS AND WEIGHTS SIZE B BE E DA DD HD L3 LA LB LC LD TG WB WH WEIGHT (g) G /8 M6 9 67, ,25 32, , G /8 M , G /8 M8 2, , G /8 M8 7, , G /4 M0 7, G /4 M G /4 M , P.S.: TECHNICAL INFORMATION (see the same ones for cylinders series U on page.7) Cylinders series X and CPUI.33
10 series WUG Accessories Guide unit for cylinders series X and series CPUI to ISO 5552 standard DESCRIPTION Guide unit series WUG for cylinders to ISO 5552 standard (series X and CPUI ) act as devices against rotation of the piston rod in the presence of torques and they are used to carry out multi-axis systems where high movement precision is required. Guide units are available in single and double version, and are supplied with self-lubricating bushings (for low speeds or heavy loads), or with recirculating ball bearing sleeves (for high speeds). P.S.: Cylinders series X and CPUI (Ø 32 63) in the magnetic version, assembled with these guide units, can accept rispectively magnetic sensors types FM00 and FM57 only (see from page.93). TECHNICAL DATA Size 32, 40, 50, 63 Standard strokes (mm) 25, 50, 00, 50, 200, 250, 300, 350, 400, 500 Versions Single unit Double unit MATERIALS Body Self-aligning radial joint Adjustable mechanical stop as standard End flanges Guide bars Bushings Sleeves Clamp Anodized aluminium alloy Steel Brass Single unit: galvanized steel Double unit: anodized aluminium alloy C45 chromium-plated steel (sliding type on bushings); Hardened steel (sliding type with sleeves) Self-lubricating sintered bronze with wiper ring Recirculating ball bearings with wiper ring Brass ORDER KEY WUG / VERSION Single unit D Double unit SLIDING TYPE B On bushings M With sleeves Series Version Sliding type Size Stroke ORDER EXAMPLES Single guide unit, size 63, 50 mm stroke, with sleeves plus cylinder series X Ø 63, double acting, 50 mm stroke, magnetic piston type, ASSEMBLED WUGM 63/ /50 X/M + M/WUG Single guide unit, size 40, 250 mm stroke, with sleeves WUGM 40/250 Double guide unit, size 50, 00 mm stroke, with bushings WUGDB 50/00 ASSEMBLY WUG + cylinders series X or CPUI M/WUG.34 Cylinders series X and CPUI
11 Accessories Guide unit for cylinders series X and series CPUI to ISO 5552 standard serieswug TECHNICAL INFORMATION WUG SINGLE GUIDE UNIT WUGD DOUBLE GUIDE UNIT L = (LT - 2LH) + MAXIMUM PERMISSIBLE LOAD-WUG VERSION B MAXIMUM PERMISSIBLE LOAD-WUGD VERSION B Maximum payload F (N) Projection XL (mm) Total lenght (L) with load laid in L/2 (mm) MAXIMUM PERMISSIBLE LOAD-WUG VERSION M MAXIMUM PERMISSIBLE LOAD-WUGD VERSION M Maximum payload F (N) Maximum payload F (N) Maximum payload F (N) Projection XL (mm) Total lenght (L) with load laid in L/2 (mm) Cylinders series X and CPUI.35
12 series WUG Accessories Guide unit for cylinders series X and series CPUI to ISO 5552 standard WUG SINGLE GUIDE UNIT LT + N.4+4 HOLES DD N.4 THROUGH HOLES DD N.4+4 HOLES DD N.4 SLOTS DIMENSIONS AND WEIGHTS SIZE DA DD FA FB HA HB HC HD HE LA LB LC LD LE LF LG LH 32 6 M6 M0x,25 M8x, M6 M2x,25 M20x, M8 M6x,5 M24x M8 M6x,5 M27x SIZE LJ LK LL LM LN LT PA PB SA SB TD TG WEIGHT INCREM. (g) WEIGHT INCREM. (g) WUGB (g) every 0 mm WUGM (g) every 0 mm , Ch.23 Ch , , Ch.26 Ch Ch.30 Ch.20 7,5 46, , ,5 25 Ch.36 Ch , CLAMP FOR DECELERATOR - WUGCD SIZE SIZE FA FB L WEIGHT (g) 32 M8x,5 M2x M20x,5 M4x, M24x2 M6x, M27x2 M20x, CLAMP FOR MAGNETIC PROXIMITY SWITCH - WUGCP SIZE SIZE FA FB L WEIGHT (g) 32 M8x,5 M2x M20x,5 M2x M24x2 M2x M27x2 M2x Cylinders series X and CPUI
13 Accessories Guide unit for cylinders series X and series CPUI to ISO 5552 standard series WUG WUGD DOUBLE GUIDE UNIT LT + No.6 HOLES FA N.4+4 HOLES DD N.4 HOLES DD N.6 HOLES FA N.4+4 HOLES DD N.4 SLOTS DIMENSIONS AND WEIGHTS SIZE DA DD FA FB HA HB HC HD HE HF HG HH LA LB LC LD LE 32 6 M6 M5 M8x, , M6 M6 M20x, ,5 63,5 3, M8 M8 M24x , M8 M8 M27x , SIZE LF LG LH LJ LK LL LM LN LO LP LQ LT PA PB SA SB TA , Ch.23 Ch , , Ch.26 Ch , ,5 35 2, Ch.30 Ch.20 33, , , ,5 2 Ch.36 Ch SIZE TB TC TD TE TG WEIGHT INCREM. (g) WEIGHT INCREM. (g) WUGDB (g) every 0 mm WUGDM (g) every 0 mm 32 24,5 9,5 9,5 4 32, ,5 5, , , Cylinders series X and CPUI.37
MATERIALS f 125: extruded profile, 20 um anodized allumium alloy Port size 0 32 =G1/8
O D AMIE NT O S VIGO. S.A. Tie rods cylinders to ISO 15552 standard www.rodavigo.net +34 986 288118 series CPUI DESCRIPTION Cylinders series "CPUI" comply with ISO 15552 standard, being in this way completely
Tie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
MATERIALS PISTON TYPE. Non-magnetic
Cylinders to AFNOR NF E49-00 seriescx DESCRIPTION Cylinders series CX comply with AFNOR NF E49-00 (ex CNOMO) standard and so they result interchangeable. Cylinders series CX with magnetic piston type can
Aluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
Double acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
Tie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
VERSION 1 / Basic cylinder R Through rod. VERSION 2 D Double acting Y Single acting rear spring* S Single acting front spring
Stainless steel round cylinders with techno-polymer end caps (to ISO 6432 standard for Ø 6 25) DESCRIPTION Cylinders series UP are born as technological efficient reply to the always new needs of different
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
XG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
Tie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
Screwed-head cylinders
Screwed-head cylinders Series HB DESCRIPTION Cylinders series HB are manufactured to be fixed on machine edges without the use of mountings. The end cap acts as a mounting device in the versions: hinge-mounted,
Sizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
Large Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
STANDARDISED MOUNTINGS
STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction
Profile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
TELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
Our policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
M/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
CYLINDERS. Moving more than air
CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders
AIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: Voting terminates on:
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 15552 ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: 218 1 17 Voting terminates on: 218 3 14 Pneumatic fluid power Cylinders with detachable mountings, 1
STANDARDISED MOUNTINGS
for PS / PLS / PC cylinders conforming ISO 15552-FNOR-DIN (PS-PLS) ISO 21287 (PC) standards Series 434 MOUNTINGS CONFORMING WITH ISO 21287 - ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications
TECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
Hydraulic speed regulators
Hydraulic speed regulators DESCRIPTION Hydraulic regulators series HC assure a constant speed of pneumatic cylinders during their working cycle. In fact in the control of tools, that during their movements
P1D-B Pneumatic Cylinders
P1D-B Pneumatic Cylinders According to ISO 15552 P1D-B series. This series features a profile design and is the basic ISO cylinder for simple applications where no special options are required. This series
12/95 N Our policy is one of continued research and development. We therefore reserve the right
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure
ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
ELECTRIC CYLINDERS SERIES ELEKTRO ACTUATORS
ELECTRIC CYLINDERS SERIES ELEKTRO 1 ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552 An electric cylinder with a connection interface in accordance with in-line version ISO 15552. The piston rod extension is
Guide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
Series 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
LPRA/182000/M, ISO cylinder Magnetic piston, double acting
> > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE
RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement
WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F
PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane
Page Product family Series Microcylinders 8 mm according to ISO 64 standard M mm according to ISO 6431 / VDMA 24562 standard K KD - 19 High-Tech Rotating pneumatic cylinders 1 mm R - Compact cylinders
bar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature
LPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting
P/822000/M, P/822000 Smoothline cylinder > 32... 00 mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard
RM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
ISO Technical details
Cylinders > piston rod cylinders > assembly groups > BP IO 15552 Technical details Operating pressure Cylinder with brake system XBP brake system 3... 6 bar Temperature range -10 C... +50 C Max. stroke
Stainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
PVA/182000, PVA/182000/M
Smooth Line cylinders with or without integrated switches Double acting Ø 3... 100 mm Smooth and spherical profile design with concealed tie rods Special polyurethane wiper seal Body sealing conforms to
Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm
Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and
Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
PRA/882000/M/EX, IVAC Clean Line cylinder Magnetic piston, double acting
> ø 3... 100 mm > Complete functional unit with LED display > TEX-zones depending on pilot control: zones &, II 3GD, Valve control module (VCM) zones 1 & 1, II GD, Pilot control on separate specification
Double and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
Series CP95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series CP ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 6431, VDMA 2462, CETOP RP43P. CJ1 CJP CJ2 CM2 C8 C76 CG1 MB MB1 CP C C2 CA1 CS1 1.-1 Series CP Model Selection Execution Standard Type
ISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
Cylinders Z K KD R RP RO RS RQ new. new. new. new. new. Product family Series Page
Product family Series Page Microcylinders 8 25 mm according to ISO 6432 Microcylinders with non-rotating rod 16 25 mm according to ISO 6432 standard 32 200 mm according to ISO 6431 / VDMA 24562 with non-rotating
-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.
Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...
AIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
ASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
Standard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
Strokes (mm) N/en
IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated
Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
PRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
PRA/182000, PRA/182000/M
Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
Cylinders ISO Bores from 32 to 125 mm
Cylinders ISO 5552 ores from 32 to 25 mm Double acting Standard executions Version Profile Tube Symbol Type STANDARD MAGNETIC AMA AMT For the magnetic reed switches type ASV and ASC see from page.0.. For
Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
ISO Cylinders - P1D-B
Flange MF1/MF2 Intended for fixed mounting of cylinder. Flange can be fitted to front or rear end cover of cylinder. Materials Flange: Surface-treated steel Mounting screws acc. to DIN 6912: Zinc-plated
Short-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE METRIC AIR CYLINDER
METRIC AIR CYLINDER WITH STAINLESS STEEL PISTON ROD, ALUMINIUM CYLINDER TUBE AND WITHOUT MAGNETIC PISTON THIS STANDARD REFERS TO THE DIMENSIONS REQUIRED FOR INTERCHANGEABILITY FOR SINGLE ROD, DOUBLE ACTING
HEAVY DUTY PNEUMATIC CYLINDERS
HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless
LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting
> > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)
Strokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting
S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,
Stainless Steel Cylinders DIN ISO 6431 and VDMA Bores from 32 to 200 mm
Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYP MAGNTIC STANDARD AMX STAINLSS STL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed
Twin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
FULL COLOR TAB #1 TA 7
FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder
1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
Available: Cylinders till july 2000 Spares till july /98 N
Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line
The Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
Series C95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless
Our policy is one of continued research and development. We therefore reserve the right 1/98 N
ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:
Standards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials:
Bosch Rexroth AG Pneumatics Ø - 100 mm Ports: M5 - double-acting with magnetic piston cushioning: elastic piston rod: Standards ISO 21287 Compressed air connection internal thread 00119673 Working pressure