Tie rods cylinders to ISO standard Ø

Transcription

1 Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA standards. These cylinders are supplied cushioned as standard and, in the version with magnetic piston type can be supplied with magnetic sensors. Available also to directive 94/9/EC ("ATEX" - 2GD category). TECHNICAL DATA Operating pressure Working temprerature Fluid Versions 0 bar C (-30 C with dry air) C with seals for high temperatures (- 0 C with dry air) Filtered, unlubricated or continuous lubricated compressed air Double acting; Single acting front spring; Single acting rear spring; Through rod; Double push tandem; Double stroke tandem; Opposed tandem Bore 25, 60, 200,, Port size 25 = G / = G 3/4 - = G Standard strokes (mm) 25, 50, 75, 80, 00, 25, 50, 60, 75, 200,, 300,, 350, 400, 450, 500, 550, 600, 650, 700, 800, 900, 000 Decelerators lenght (mm) mm Maximum stroke (mm) 3000 Max. stroke single acting (mm) 00 MATERIALS End caps Painted die-cast aluminium with chromate conversion coating Cylinder barrel Extruded profile, 20 µm anodized aluminium alloy Tie rods, tie and rods nuts Steel Stainless steel (supplied upon request for tie rods and tie nuts) Piston rod Piston rod bearing Decelerator ogives Piston Seals C45 chromium-plated steel AISI 303 rolled stainless steel Bronze-Iron 20%, sintered, self-lubricating Aluminium alloy Die-cast aluminium alloy with chromate conversion coating Polyurethane and NBR rubber Viton (only available ) ORDER KEY Bore Version Stroke Series Pistone type Option Option 2 Option 3 Option 4 Special option N.B.:Magnetic switch FM 00-FM 57 (see chapter magnetic sensors from page.93 del CAT.08/EN) See technical data on page 0. 2 ORDER EXAMPLES XL/ Cylinder 25, double acting, 00 mm stroke, non-magnetic piston type, ATEX: 25/ 00 XL/N/EX Cylinder, through rod, stroke 50, magnetic piston type, stainless steel piston rod: R 50 XL/M S VERSION / Double acting T Double push tandem * S Single acting front spring * P Double stroke tandem * Y Single acting rear spring * V Opposed tandem * R Through rod PISTON TYPE N Non magnetic M Magnetic ** OPTION Z Fit for piston rod locking unit (only 25) OPTION 2 Stainless steel piston rod and rod nut 2 Viton seals* OPTION 3 5 Extruded profile barrel (only 25) OPTION 4 /EX complies with the ATEX directive II 2GDc T6 0 C<Ta<60 C from 25 to 200 * Available only for SPARE PARTS SEALS KIT Polyuretane and NBR rubber Through rod and polyuretane and NBR rubber Viton Through rod Viton 3 Stainless steel piston rod and rod nut and Viton seals* II 2GDc T5 T 00 C -20 C<Ta<80 C from to ** Available even with Viton seals just for applications where is needed a chemical compatibility; not available for high temperature /SG/XL /SG/R/XL /SG/XL2 /SG/R/XL2.5

2 Tie rods cylinders to ISO 5552 standard 25 XL BASIC CYLINDER DIMENSIONS AND WEIGHTS BASIC CYLINDER A* BA* B* BG* CH RT* E* EE* G D KK* l l 2* l 8* O PL* SW* TG* VA* VD WB WH* M 2 40 G / M27X * STANDARDIZED DIMENSIONS 6475 Increase every 0mm M 6 80 G3/ M36X M G3/ M36X M G M42X M G M48X THROUGH ROD P.S.: Rod nuts supplied as standard.6

3 Tie rods cylinders to ISO 5552 standard 25 series XL DOUBLE PUSH TANDEM DOUBLE STROKE TANDEM 2 OPPOSED TANDEM 2 FIT FOR PISTON ROD LOCKING UNIT.7

4 Fixings for cylinders 25 to ISO 5552 standard FLANGE - STEEL - CPUI/F (supplied with screws) D H FB H3 E MF ±0.2 R H3 TF JS UF * W 45 ZF * NOT TO ISO 5552 STANDARD FOOT - STEEL - CPUI/PB (supplied with screws) AB H4 AH JS5 AT AU E F SA TR JS4 XA FRONT FEMALE HINGE - NOT TO ISO 5552 STANDARD - ALUMINIUM - CPUI/CFA (supplied with screws) CB CD H9 E FL L UB h

5 Fixings for cylinders 25 to ISO 5552 standard series XL REAR FEMALE HINGE (supplied with screws) - ALUMINIUM - CPUI/CF - STEEL - CPUI/CF AC CB CD H9 E FL L L4 UB h Alu Steel PIVOT FOR REAR FEMALE HINGE (ALUMINIUM) - GALVANIZED STEEL - CPU/CPUI/SEC BU EK f7 EL (STEEL) - GALVANIZED NITRIDED STEEL - CPU/CPUI/SEC AC MALE HINGE (Supplied with screw) - ALUMINIUM - CPUI/CM - STEEL - CPUI/CM AC CD H9 E EW FL L L Alu Steel

6 Fixings for cylinders 25 to ISO 5552 standard SQUARE JOINT - ALUMINIUM - CPUI/AS PH JS5 CK H9 EM GL RA UR BT JS4 JS L ,2 BR S5 K H 3 JS4 K , , , NARROW REAR FEMALE HINGE - ALUMINIUM - CPUI/CFS (supplied with screws) - STEEL - CPUI/CFS AC (only for 25) CG D0 CP d2 B3 CF F7 E FM L L L Alu Steel 3550 NON-ROTATING PIVOT FOR NARROW REAR FEMALE HINGE - GALVANIZED NITRIDED STEEL - CPUI/SEC AT d4 JK H2 f7 L8 ES L9 L G

7 Fixings for cylinders 25 to ISO 5552 standard NARROW MALE HINGE WITH ARTICULATED HEAD (ISO 2240) - ALUMINIUM - CPUI/CMSS (supplied with screws) - STEEL - CPUI/CMSS AC (only for 25) CX H7 E EN MS EU G DL L Alu Steel 3500 SQUARE JOINT WITH ARTICULATED HEAD (ISO 2240) - STEEL - CPUI/ASSS AC CA JS5 BQ CK H7 EM G JS4 G2 JS4 G3 H K JS4 K2 L5 R S5 H ,2 40 3, INTERMEDIATE HINGE - STEEL - EXTRUDED TUBE WITH TIE RODS - CX/CPUI/CT (supplied with dowels) TK TD e9 TL h4 TM h4 UW XV min XV max P. S.: - ADJUSTABLE POSITION (fixing through dowels) - FIXED POSITION (specifiy dimension "XV", fixed on cylinder with completed threaded and galvanized rods type "S6", see on page 0. 2) ASSEMBLY (FIXED): CX/CPUI/CT/+cylinders series XL S6 type MF/CX/CPUI/CT SUPPORT FOR INTERMEDIATE HINGE - STEEL - CPUI/SCT A B B2 C d F7 d2 H3 FN XA , ,

8 Cylinder piston rod attachments 25 FEMALE PISTON ROD CLEVIS WITH PIN AND SNAP RING TO ISO STEEL - M27x2 M36x2 DA DB DE F b2 G HA HB L Type 25 M27X FFP27X M36X M42X M48X FFP36X2 FFP42X2 FFP48X2 SELF-LUBRICATING PISTON ROD EYE TO DIN ISO 2240 STANDARD - STEEL DA DB DC DE H7 F G HA HB L W Type 25 M27X FF27x2/SS M36X FF36x2/SS ROD NUT - STEEL DI CH M42X2 65 M48X2 75 S 6 8 Weigh Type M27X DST27X2 M36X DST36X2 DST42X2 DST48X2 MAGNETIC SENSORS SERIES FM 00 - FM 57 See chapter magnetic sensors from page. 93 of the general catalog (CAT. 08/EN) MAGNETIC SENSOR SERIES FM 00 - FM 57 FIXING BRACKETS For see chapter magnetic sensors from page.93 of the general catalog (CAT.08/EN) SENSOR FIXING BRACKETS - ALUMINIUM - SQ (Supplied with adapter for magnetic sensors series FM 00) A B C Type SQ/A SQ/A. 2

9 Low friction cylinders series XT - X - XL SEALS FOR LOW FRICTION CYLINDERS d b a c e a) Piston seal for rear chamber; b) Piston seal for front chamber; c) Cushioning seal for rear chamber; d) Cushioning seal for front chamber; e) Rod seal. APPLICATIONS DESCRIPTION OPTION SEALS Rear chamber Rear chamber + cushioning Rear chamber + rod seals Rear chamber + cushioning + rod seals Front chamber Front chamber + cushioning SA SB SC SD SE SF a a + c a + e a + c + e b + e b + e + d DESCRIPTION The low friction cylinders series "XT", "X" and "XL" (available from 25 to 200), are used as "dancers" or "enlager strechers" cylinders, but they are just single acting cylinders without the return spring. As indicated in the previous table, we can have different applications, combining properly the various seals inserted in the cylinder. The application called as option "SA" is the main one, because, using just the seal "a", it's the one that offers the lowest internal friction. The "SB" option uses the pneumatic cushioning for an emergency situation, to avoid crushes in the case of the breakdown of the plant. In the options "SC" and "SD", the rod seal avoids to the impurities to go into the cylinder. In the option "SE" the pressurized chamber is the front one and in the option "SF" the pressurized chamber is stil the front one but with the pneumatic cushioning for an emergency situation. ATTENTION: For the applications please consider the cylinder as single acting without spring. ORDER EXAMPLE Cylinder 50, double acting, 00 mm stroke, magnetic piston type, rear chamber and cushioning seals: 50/ 00 XT/M SB Cylinder 25, double acting, 200 mm stroke, magnetic piston type, front chamber and cushioning seals: 25/200 XL/M SF Low friction cylinders. 3