PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting

Size: px
Start display at page:

Download "PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting"

Transcription

1 P/822000/M, P/ Smoothline cylinder > mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard > Wide range of cylinder variants > Polyurethane seals provide high performance and long life Technical features Medium: Compressed air, filtered, lubricated or non-lubricated : Based on ISO 5552 (length, mounting pitch and thread dimensions according to ISO Some outside dimensions different from ISO 5552) Operation: Double acting, magnetic or non magnetic piston, adjustable cushioning Operating pressure:... 0 bar (... 5 psi) Port size: G/8, G/, G3/8 Cylinder diameters: 32, 0, 50, 63, 80, 00 mm strokes: See below Non-standard strokes: vailable ( mm) Operating temperature: C max. ( F) ir supply must be dry enough to avoid ice formation at temperatures below +2 C. (+35 F) Materials: Profile barrel: anodised aluminium End covers: pressure diecast anodised aluminium Piston rod: stainless steel see page 2 Piston rod seals: PU Piston seals: PU O-rings: NB Technical data Cylinder (mm) Port size G/8 G/8 G/8 G/ G/ G3/8 Piston rod (mm) Piston rod thread M0 x,25 M2 x,25 M6 x,5 M6 x,5 M20 x,5 M20 x,5 Cushion length (mm) Theoretical thrusts at 6 bar outstroke (N) Theoretical thrusts at 6 bar instroke (N) ir consumption at 6 bar outstroke (l/cm) 0,056 0,088 0,37 0,28 0,35 0,55 ir consumption at 6 bar instroke (l/cm) 0,05 0,076 0,7 0,98 0,32 0,5 strokes Cylinder (mm) Stroke length (mm) without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7 en

2 P/822000/M, P/ Smoothline cylinder Cylinder variants - non-magnetic piston Symbol T S C D V E Non-magnetic piston Description P../ cylinder 6 TP../ High temperature version, 50 C max P../822000/W Cylinder with special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand,hoar-frost or ice) P../822000/IU Cylinder with extended piston rod 6 P../822000/W5 Cylinder with extended piston rod and special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand, hoar-frost or ice) P../822000/G Cylinder with piston rod bellows 7 Dimensions Page P../822000/J Cylinder with double ended piston rod 7 TP../822000/J High temperature version, 50 C max P../822000/W3 Cylinder with double ended piston rod and special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand, hoar-frost or ice) P../822000/IT Four position cylinders 8 P../822000/L2 Cylinder with locking unit (passive) Spring force on removal of the signal to the unit. Operating pressure for locking unit:... 0 bar 8 Cylinder variants - magnetic piston Symbol T S C D V E magnetic piston Description P../822000/M cylinder 6 TP../822000/M High temperature version, 50 C max P../822000/W2 Cylinder with special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand,hoar-frost or ice) P../822000/MU Cylinder with extended piston rod 6 P../822000/W6 Cylinder with extended piston rod and special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand, hoar-frost or ice) Dimensions Page P../822000/MG Cylinder with piston rod bellows 7 P../822000/JM Cylinder with double ended piston rod 7 TP../822000/JM High temperature version, 50 C max P../822000/W Cylinder with double ended piston rod and special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand, hoar-frost or ice) P../822000/MT Four position cylinders 8 P../822000/L Cylinder with locking unit (passive) Spring force on removal of the signal to the unit. Operating pressure for locking unit:... 0 bar 8 For the cylinder models style, S, C, D, V and E see options selector en without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7

3 P/822000/M, P/ Smoothline cylinder Option selector Special version High temperature; 50 C max Piston rod material Stainless steel (martensitic); wiper seal Stainless steel (austenitic); wiper seal Hard chromium plated; wiper seal Stainless steel (austenitic); hard chromium plated; wiper seal Stainless steel (austenitic); Smooth wiper seal Stainless steel (austenitic); hard chromium plated; Smooth wiper seal Cylinder (mm) 032, 00, 050, 063, 080, 00 Substitute T Substitute S C D V E Substitute Note: If option is not required, disregard option position within part number, eg. P/822032/00. For combinations of cylinder variants consult our Technical Service. Please note that heat resistant seals are not available for all variants. This options selector explains only the cylinder variants. dditional variants/options can not be derived from. P /822 / / Strokes (mm) 2000 max. Variants (magnetic piston) Double ended piston rod Four position Special wiper seal Double ended piston rod; special wiper seal Piston rod bellow Extended piston rod Special wiper seal, extended piston rod P**/822***/MU/****/*** /W6/ Piston rod locking unit Variants (non-magnetic piston) Double ended piston rod Four position Special wiper seal Double ended piston rod, special wiper seal Piston rod bellow Extended piston rod Special wiper seal, extended piston rod P**/822***/IU/****/*** /W5/ Substitute M JM MT W2 W MG MU W6 Extension (mm) L Substitute None J IT W W3 G IU W5 Extension (mm) Piston rod locking unit L2 03/7 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH en

4 P/822000/M, P/ Smoothline cylinder Mountings Position Style Corrosion protected B, G Clear anodised aluminium Clear anodised aluminium. Screws: 2 2 C Galvanized steel (ø mm) Painted steel (ø 80 & 00 mm) 3 Diecast aluminium Black corrosion protected diecast aluminium. Certified for the food industry. Screws: 2 U Galvanized aluminium Inner ring: steel Outer ring: brass Black corrosion protected diecast aluminium Certified for the food industry Inner ring: stainless Steel (austenitic) Outer ring: nickel plated hardened steel 5 D Diecast aluminium Bolt: galvanized steel (martensitic) Circlip: galvanized steel Black corrosion protected diecast aluminium Certified for the food industry Bolt: X 0 Cr Ni S 8 9 (.305, ISI 303) Circlip: Stainless steel (martensitic). Screws: 2 6 SW Diecast aluminium Black corrosion protected diecast aluminium Certified for the food industry 7 US Galvanized aluminium. Inner ring: steel Outer ring: brass 8 D2 Painted cast iron. Bolt: stainless steel (martensitic) Circlip: galvanized steel 9 FH Cast iron 0 Galvanized steel 2 S Clear anodised aluminium Bearing: brass 5 F Galvanized steel Bolt: galvanized steel Circlip: Galvanized steel Nickel plated steel Circlip: X 0 Cr Ni S 8 9 (.305, ISI 303) Bolt: X 0 Cr Ni S 8 9 (.305, ISI 303) 6 SS Painted cast iron 7 UF Galvanized steel. Inner ring: steel Outer ring: brass Nickel plated steel. Inner ring: stainless steel (austenitic) Outer ring: nickel plated hardened steel. 8 K Galvanized steel en without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7

5 P/822000/M, P/ Smoothline cylinder Mountings K B, G C D D2 F FH Cyl. 0 Page 9 8 Page 9 Page 9 2 Page 9 5 Page 0 8 Page 0 5 Page 0 9 Page 0 32 QM/8032/35 QM/8025/38 Q/8032/22 Q/8032/2 Q/8032/23 Q/8032/2 QM/8025/25 Q/8032/3 0 QM/8032/35 QM/800/38 Q/800/22 Q/800/2 Q/800/23 Q/800/2 QM/800/25 Q/800/3 50 QM/8050/35 QM/8050/38 Q/8050/22 Q/8050/2 Q/8050/23 Q/8050/2 QM/8050/25 Q/8050/3 63 QM/8050/35 QM/8050/38 Q/8063/22 Q/8063/2 Q/8063/23 Q/8063/2 QM/8050/25 Q/8063/3 80 QM/8080/35 QM/8080/38 Q/8080/22 Q/8080/2 Q/8080/23 Q/8080/2 QM/8080/25 Q/8080/3 00 QM/8080/35 QM/8080/38 Q/800/22 Q/800/2 Q/800/23 Q/800/2 QM/8080/25 Q/800/3 Corrosion protected 32 PVQ/8032/22 PVQ/8032/23 PVQM/8025/25 0 PVQ/800/22 PVQ/800/23 PVQM/800/25 50 PVQ/8050/22 PVQ/8050/23 PVQM/8050/25 63 PVQ/8063/22 PVQ/8063/23 PVQM/8050/25 80 PVQ/8080/22 PVQ/8080/23 PVQM/8080/25 00 PVQ/800/22 PVQ/800/23 PVQM/8080/25 S SS SW UF U US ssembly kit for four-position cylinder Cyl. 3 Page 2 Page 6 Page 2 6 Page 7 Page Page 2 7 Page 2 Page 2 32 Q/8032/27 Q/8032/ M/P993 M/P993 QM/8025/32 Q/8032/33 M/P030 QM/92032/55 0 Q/800/27 Q/800/ M/P9932 M/P99 QM/800/32 Q/800/33 M/P03 QM/9200/55 50 Q/8050/27 Q/800/ M/P9933 M/P995 QM/8050/32 Q/8050/33 M/P032 QM/92050/55 63 Q/8063/27 Q/8063/ M/P993 M/P996 QM/8050/32 Q/8063/33 M/P033 QM/92063/55 80 Q/8080/27 Q/8063/ M/P9935 M/P997 QM/8080/32 Q/8080/33 M/P03 QM/92080/55 00 Q/800/27 Q/800/ M/P9936 M/P998 QM/8080/32 Q/800/33 M/P035 QM/9200/55 Corrosion protected 32 PVQ/8032/27 M/P059 PVQM/8025/32 PVQ/8032/33 0 PVQ/800/27 M/P060 PVQM/800/32 PVQ/800/33 50 PVQ/8050/27 M/P06 PVQM/8050/32 PVQ/8050/33 63 PVQ/8063/27 M/P062 PVQM/8050/32 PVQ/8063/33 80 PVQ/8080/27 M/P063 PVQM/8080/32 PVQ/8080/33 00 PVQ/800/27 M/P06 PVQM/8080/32 PVQ/800/33 ccessories Magnetically operated switches M/50 *) Switch mounting bracket *2) Service kit Service kit 25 Pages 3 & *) Switches can be mounted flush with the profile! Page 2 QM/33/822/22 *2) For switches (ø 8 mm) QM/33, QM/3 or QM/3 only! Useable for all cylinder ø. Cyl. 32 PQ/822032/00 0 PQ/82200/00 50 PQ/822050/00 63 PQ/822063/00 80 PQ/822080/00 00 PQ/82200/00 03/7 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH en

6 P/822000/M, P/ Smoothline cylinder Dimensions Dimensions in mm Projection/First angle L2 KW G5 ø E ø B e MM h 9 KK T ø B e E2 T E KV SW BG G BH 5 EE 8 PL ø 80 & 00 PL2 E E2 M VD L2 WH G PL 9 L8 + # T L9 PL V G - - ø ø 80 & 00 T BG BG 7 # Stroke BH T Cushion adjustment front end cover 7 ir supply, cylinder instroke 8 ir supply, cylinder outstroke 9 lternative air supply, cylinder instroke Cushion adjustment rear end cover 5 M/50 switches can be mounted flush with the profile ttention: eed switches can only be used for mm Cyl M Be Be BG BH E E2 E EE G G G5 KK KW L2 L8 L9 L2 MMh G/8 7 20,5 M0x, , ,5 3 G/ ,5 M2x, , , G/8 55,5 2,5 M6x, , ,5 G/ ,5 M6x, , G/ M20x, , G3/8 2, ,5 M20x, Cyl PL PL PL2 T V VD WH KV SW at 0 mm per 25 mm ; non-magnetic piston ; magnetic piston ,5 32,5 M ,56 kg 0,07 kg P/822032/* P/822032/M/* 0 7 0,5 38 M 6 3, ,93 kg 0, kg P/82200/* P/82200/M/* ,5 6,5 M 8 3, ,8 kg 0,8 kg P/822050/* P/822050/M/* 63 9,5,5 6 56,5 M ,32 kg 0,9 kg P/822063/* P/822063/M/* 80 9, M ,02 kg 0,29 kg P/822080/* P/822080/M/* ,5 8,5 89 M ,2 kg 0,35 kg P/82200/* P/8220/M/* * Please insert standard stroke length en without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7

7 P/822000/M, P/ Smoothline cylinder Cylinder variants P/822000/J, P/822000/JM Cylinder double ended piston rod Dimensions in mm Projection/First angle ø ø 80 & 00 L8 + # ZM + 2 x # Cyl. L8 ZM Non-magnetic piston Magnetic piston P/822032/J/* P/822032/JM/* P/82200/J/* P/82200/JM/* P/822050/J/* P/822050/JM/* P/822063/J/* P/822063/JM/* P/822080/J/* P/822080/JM/* P/82200/J/* P/82200/JM/* # Stroke Two threads can t be used for mountings * stroke length P/822000/G, P/822000/MG Cylinder with piston rod bellow B ø Cyl. Max. stroke per bellow Piston rod extention B for first bellow for further bellows Non-magnetic piston Magnetic piston P/822032/G/* P/822032/MG/* P/82200/G/* P/82200/MG/* P/822050/G/* P/822050/MG/* P/822063/G/* P/822063/MG/* P/822080/G/* P/822080/MG/* P/82200/G/* P/82200/MG/* * stroke length 03/7 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH en

8 P/822000/M, P/ Smoothline cylinder P/822000/IT, P/822000/MT Four position cylinder L8 + # L L8 + #2 L0 + # + #2 Cyl. L8 L0 L Non-magnetic piston Magnetic piston ,5 2,5 P/822032/IT/*/** P/822032/MT/*/** ,5 2,5 P/82200/IT/*/** P/82200/MT/*/** P/822050/IT/*/** P/822050/MT/*/** P/822063/IT/*/** P/822063/MT/*/** P/822080/IT/*/** P/822080/MT/*/** P/82200/IT/*/** P/82200/MT/*/** * Please insert standard stroke length ** Please insert standard stroke 2 length # Stroke #2 Stroke 2 ssembly kit P/822000/L2, P/822000/L Cylinder with locking unit (passive) B L 8 + # J EE N ø B e E T M VD D E K WH F H G L E # Stroke Cyl B D E F G H J K L M N B e E E , M , , M 5 2 6, , M , M M M Cyl EE L 8 T VD WH Locking force ; non-magnetic piston ; non-magnetic piston 32 M ,5 M N P/822032/L2/* P/822032/L/* 0 G / M N P/82200/L2/* P/82200/L/* 50 G /8 06 6,5 M N P/822050/L2/* P/822050/L/* 63 G /8 2 56,5 M N P/822063/L2/* P/822063/L/* 80 G / M N P/822080/L2/* P/822080/L/* 00 G / M N P/82200/L2/* P/82200/L/* * Please insert standard stroke length en without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7

9 P/822000/M, P/ Smoothline cylinder Mountings Front or rear stud mounting Conforms to ISO 5552, type MX Piston rod swivel K Dimensions in mm Projection/First angle BB DD TG 3 2 TG KK KK BB DD TG kg () 32/0 7 M6 32,5/38 0,02 QM/8032/35 50/63 23 M8 6,5/56,5 0,05 QM/8050/35 80/00 28 M0 72/89 0,08 QM/8080/35 B F L2 L KK B F L L2 kg (K) M0x, ,20 QM/8025/38 0 M2x, ,20 QM/800/38 50/63 M6x, ,65 QM/8050/38 80/00 M20x, ,72 QM/8080/38 Front flange B, G Conforms to ISO 5552, type MF and MF2 Foot mounting C Conforms to ISO 5552, type MS MF UF TF FB E T H U O ø B T E E FB MF TF UF kg (B, G) ,25 Q/8032/ ,35 Q/800/ ,70 Q/8050/ ,80 Q/8063/ ,35 Q/8080/ ,20 Q/800/22 Corrosion protected version ,25 PVQ/8032/ ,35 PVQ/800/ ,7 PVQ/8050/ ,8 PVQ/8063/ ,35 PVQ/8080/ ,2 PVQ/800/22 B H O T U E T kg (C) ,5 Q/8032/ ,8 Q/800/ ,30 Q/8050/ ,39 Q/8063/ ,80 Q/8080/ ,95 Q/800/2 03/7 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH en

10 P/822000/M, P/ Smoothline cylinder ear clevis D Conforms to ISO 5552, type MP2 LH ear clevis D2 Conforms to ISO 5552, type B6 Dimensions in mm Projection/First angle UB FL CP CB H L CG H FM S EK e 8 B3 JK h 9 M CB H EK e8 FL L LH M UB kg (D) , Q/8032/ ,6 Q/800/ ,22 Q/8050/ ,3 Q/8063/ ,5 Q/8080/ ,90 Q/800/23 Corrosion protected version , PVQ/8032/ ,6 PVQ/800/ ,22 PVQ/8050/ ,3 PVQ/8063/ ,5 PVQ/8080/ ,9 PVQ/800/23 B H B2 B3 EK h9 FL 2 kg (D2) , ,20 Q/8032/ , ,23 Q/800/ ,3 6 27,5 22 0,36 Q/8050/ , ,55 Q/8063/ , ,90 Q/8080/ , ,5 Q/800/2 Piston rod clevis F Conforms to DIN ISO 80 Front or rear detachable trunnion FH Conforms to VDM 2562 part 2, type MT 5/6 LE CE K CL CM CL KK ø CK h L UW TD e 9 E KK CE CKh CL CM E LE K kg (F) 32 M0x, ,09 QM/8025/25 0 M2x, ,3 QM/800/25 50/63 M6x, ,5 0,33 QM/8050/25 80/00 M20x, ,67 QM/8080/25 Corrosion protected version 32 M0x, ,09 PVQM/8032/25 0 M2x, ,3 PVQM/800/25 50/63 M6x, ,5 0,33 PVQM/8050/25 80/00 M20x, ,67 PVQM/8080/25 TL D H TM h D h L TD e9 TL TM h UW kg (FH) ,20 Q/8032/ , ,38 Q/800/ , ,60 Q/8050/ , ,0 Q/8063/ , ,90 Q/8080/ ,50 Q/800/3 en without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7

11 P/822000/M, P/ Smoothline cylinder ear eye Conforms to ISO 5552, type MP Trunnion support S Conforms to ISO 5552, type T FL ø D 3 EW L CD H 9 T H 2 H H7 ø D F x 5 M ø D 2 B C B 2 CD H9 EW FL L M kg () , ,09 Q/8032/ , , Q/800/ , ,7 Q/8050/ , ,2 Q/8063/ , ,37 Q/8080/ , ,59 Q/800/27 Corrosion protected version , ,09 PVQ/8032/ , , PVQ/800/ , ,7 PVQ/8050/ , ,2 PVQ/8063/ , ,37 PVQ/8080/ , ,59 PVQ/800/27 B 2 C DH7 D2 D3 F x 5 H 2 T kg (S) ,5 2 6, ,8 0,0 Q/8032/ 0/ , , Q/800/ 63/ , ,8 Q/8063/ , ,3 Q/800/ Universal piston rod eye UF Conforms to DIN ISO 839 Wide hinge SW Conforms to ISO 5552, type B7 CN H 7 CE EN h2 EM ø EB L 2 ø CK H 9 B GL KK Z Z PH BT E LE EP ø HB TE U UL Thread KK X CE CN H7 EN -0, E LE Z kg (UF) 32 M0x, ,09 QM/8025/32 0 M2x, ,3 QM/800/32 50/63 M6x, ,33 QM/8050/32 80/00 M20x, ,67 QM/8080/32 Corrosion protected version 32 M0x, ,09 PVQM/8025/32 0 M2x, ,3 PVQM/800/32 50/63 M6x, ,33 PVQM/8050/32 80/00 M20x, , PVQM/8080/32 C CKH9 D H2 EM G G2 G3 K K2 L S kg (SW) , ,6 0 6,6 0,05 M/P , ,6 6,6 0,07 M/P , , , M/P , , ,8 M/P , ,5 5 0,28 M/P , ,5 9 0,2 M/P998 Corrosion protected version , ,6 0 6,6 0,05 M/P , ,6 6,6 0,07 M/P , , , M/P , , ,8 M/P , ,5 5 0,28 M/P , ,5 9 0,2 M/P06 03/7 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH en

12 P/822000/M, P/ Smoothline cylinder Universal rear eye U Conforms to ISO 5552, type MP6 Narrow hinge SS Dimensions in mm Projection/First angle EX Z Z DL CX H 7 MS L 2 ø CK G 7 EM ø EB ø HB PH BT B GL TE U UL CN H7 EN E FL Z kg (U) ,5 3 0,5 Q/8032/ ,25 Q/800/ ,0 Q/8050/ ,55 Q/8063/ ,90 Q/8080/ ,50 Q/800/33 Corrosion protected version ,5 3 0,5 PVQ/8032/ ,25 PVQ/800/ , PVQ/8050/ ,55 PVQ/8063/ ,9 PVQ/8080/ ,5 PVQ/800/33 C CNG7 D H2 EM G G2 G3 K K2 L S kg (SS) ,6 0 6,6 0,5 M/P ,6 6,6 0,20 M/P , ,8 M/P , ,50 M/P ,5 5 0,75 M/P ,5 9,20 M/P9936 ssembly kit for four-position cylinder L Switch mounting bracket QM/33/822/22 For switches (ø 8 mm) QM/33, QM/3 or QM/3 only! Useable for all cylinder ø. 2 E 8 20,5 Swivel hinge US Conforms to VDM 2562 part 2 EN -0, EU Z E L 2 kg , ,0 QM/92032/ , ,05 QM/9200/ , ,0 QM/92050/ ,3 QM/92063/ ,3 QM/92080/ ,50 QM/9200/55 E G ø D3 Z L5 H6 CH ø CN H 7 ø S5 K K 2 CH CNH7 D EN -0, E EU G G2 G3 H2 K K2 L S Z kg (US) , ,6 6,6 3 0,9 M/P ,6 6,6 3 0,2 M/P , ,6 M/P , ,59 M/P ,5 5,03 M/P ,5 5,0 M/P035 G 2 G 3 en without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7

13 P/822000/M, P/ Smoothline cylinder Technical data - eed switches - additional informations see data sheet N/en Symbol Voltage Current maximum Function Temperature LED Protection class Plug Cable length Cable type Weight (V a.c.) (V d.c.) (m) ( C) (m) (g) ~ + BN Closer IP66 2, 5 or 0 PVC 2 x 0,25 37 M/50/LSU/*V Closer IP66 5 PU 2 x 0,25 37 M/50/LSU/5U ~ BU BN BU Closer IP66 2 Silicon 2 x 0,25 37 TM/50/U/2S BK BU BN + BN ~ Changeover IP66 5 PVC 3 x 0,25 37 M/50/C/5V Closer IP66 M8 x 0,3 PVC 3 x 0,25 6 M/50/LSU/CP *) ~ BK * Insert cable length; *) Plug-in connector see page ; Color code: BK = black, BN = brown, BU = blue Drawings M/50/LSU/*V, M/50/LSU/5U, TM/50/U/2S Cable length L = 2, 5 or 0 m -B 5, 30 L Dimensions in mm Projection/First angle ø 6,,5 B 2 M/50/C/5V Cable length L = 5 m -B 5, 30 L ø 6,,5 B 3 M/50/LSU/CP -B 5, ±5 3, X BK ø 6,,5 B X BN 3 BU Fixing screw 2 + BN = brown; - BU = blue (output) 3 - BK = black; + BN = brown; - BU = blue Plug M8 x, color code: BK = black; BN = brown; BU = blue ccessories Plug-in connector cable with nut Outer cover Cable length (m) Weight (kg) Connector Connector PVC 3 x 0,25 5 m 0,8 M8 x M/P7300/5 PU 3 x 0,25 5 m 0,8 M8 x M/P73002/5 PU 3 x 0,3 5 m 0,2 M2 x M/P359/5 03/7 without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH en

14 P/822000/M, P/ Smoothline cylinder Technical data - Solid state - additional informations see data sheet N/en Symbol pnp + BN BU BK Voltage (V d.c.) Current maximum (m) Function Temperature ( C) LED Protection class Plug Cable length (m) Cable type Weight (g) PNP IP67 2, 5 or 0 PVC 3 x 0,2 37 M/50/EP/*V PNP IP68 5 PU 3 x 0, 37 M/50/EP/5U pnp npn npn BN BU BK BU + BN BK + BU BN BK PNP IP67 M8 x 0,3 PVC 3 x 0, 6 M/50/EP/CP *) PNP IP67 M2 x 0,3 PVC 3 x 0, 6 M/50/EP/CC *) NPN IP67 2, 5 or 0 PVC 3 x 0,2 37 M/50/EN/*V Closer IP67 M8 x 0,3 PVC 3 x 0, 6 M/50/EN/CP *) * Insert cable length; *) Plug-in connector below; Color code: BK = black, BN = brown, BU = blue Drawings M/50/EP/*V, M/50/EN/*V Cable length L = 2, 5 or 0 m -B +30 L 5, 30 2 ± Dimensions in mm Projection/First angle ø 6,,5 B 2 M/50/EP/CP, M/50/EN/CP -B 5, ±5 3, X BK ø 6,,5 B 3 X BN 3 BU M/50/EP/CC -B 5, 30 7,5 300 ±5 X BK 3 BU ø 6,,5 X BN Fixing screw 2 Color code: BK = black; BN = brown; BU = blue 3 Plug M8 x Plug M2 x en without notice, the specifications given in this document. (20-232g) 205 Norgren GmbH 03/7

PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting

PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting > > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance

More information

Strokes (mm) N/en

Strokes (mm) N/en IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated

More information

LPRA/182000/M, ISO cylinder Magnetic piston, double acting

LPRA/182000/M, ISO cylinder Magnetic piston, double acting > > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE

More information

PRA/882000/M/EX, IVAC Clean Line cylinder Magnetic piston, double acting

PRA/882000/M/EX, IVAC Clean Line cylinder Magnetic piston, double acting > ø 3... 100 mm > Complete functional unit with LED display > TEX-zones depending on pilot control: zones &, II 3GD, Valve control module (VCM) zones 1 & 1, II GD, Pilot control on separate specification

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders

More information

LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting

LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting > > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)

More information

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane

More information

RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm

RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and

More information

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm

More information

LPRA/182000/M Double acting profile cylinders Ø mm

LPRA/182000/M Double acting profile cylinders Ø mm Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO

More information

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation

More information

Our policy is one of continued research and development. We therefore reserve the right

Our policy is one of continued research and development. We therefore reserve the right Corrosion resistant design Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Magnetic Piston Double Acting Ø 32 to 100 mm Accepted in the Food Industry Conforms to ISO 6431, VDMA 24562 and NFE

More information

Our policy is one of continued research and development. We therefore reserve the right to amend,

Our policy is one of continued research and development. We therefore reserve the right to amend, Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed

More information

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and

More information

PRA/801000, PRA/803000, RA/801000, RA/ ISOLine cylinder, single acting

PRA/801000, PRA/803000, RA/801000, RA/ ISOLine cylinder, single acting PR/80000, PR/80000, R/80000, R/80000 > ø 2... 00 mm > High performance adaptive cushioning system CS > High performance, stability and reliability Technical features Medium: Compressed air, filtered, lubricated

More information

12/95 N Our policy is one of continued research and development. We therefore reserve the right

12/95 N Our policy is one of continued research and development. We therefore reserve the right Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure

More information

RM/900/M Heavy duty cylinders Ø 1 1/4... 4

RM/900/M Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush

More information

KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK

KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for

More information

PVA/182000, PVA/182000/M

PVA/182000, PVA/182000/M Smooth Line cylinders with or without integrated switches Double acting Ø 3... 100 mm Smooth and spherical profile design with concealed tie rods Special polyurethane wiper seal Body sealing conforms to

More information

LRM/55401/M, Roundline cylinder Magnetic piston, double acting

LRM/55401/M, Roundline cylinder Magnetic piston, double acting LRM/5540/M, Roundline cylinder > > 3... 00 mm > > Clean line design > > Low friction, long life seals > > Standard magnetic piston for full control system versatility > > Non-lube operation > > Shock and

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush

More information

Available: Cylinders till july 2000 Spares till july /98 N

Available: Cylinders till july 2000 Spares till july /98 N Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line

More information

10/97 N Our policy is one of continued research and development. We therefore reserve the right

10/97 N Our policy is one of continued research and development. We therefore reserve the right ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting

More information

Our policy is one of continued research and development. We therefore reserve the right 1/98 N

Our policy is one of continued research and development. We therefore reserve the right 1/98 N ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:

More information

M/1000, Heavy Duty Cylinders Double Acting

M/1000, Heavy Duty Cylinders Double Acting > > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.

More information

PRA/182000, PRA/182000/M ISO/VDMA Profile cylinders

PRA/182000, PRA/182000/M ISO/VDMA Profile cylinders P/182000, P/182000/M IO/VDM Profile cylinders onforms to IO 15552, IO 6431, VDM 24562 and NFE 49-003-1 Profile barrel with concealed tie rods High performance, stability and reliability Polyurethane seals

More information

RM/57200/M, RT/57200/M

RM/57200/M, RT/57200/M Roundline Cylinders Magnetic Piston Double Acting Ø 8 to 63 mm Three different basic versions provide flexibility and wide range of application Magnetic piston as standard provides a wide range of control

More information

Our policy is one of continued research and development. We therefore reserve the right 10/99 N

Our policy is one of continued research and development. We therefore reserve the right 10/99 N Stainless Steel ISO Cylinders Magnetic Piston Double Acting Ø 12 to 25 mm High corrosion and acid resistance Magnetic piston as standard Conforming to ISO 6432 Suitable for applications in the Food Industry

More information

ACT-72. DA/8000 Double acting Ø mm

ACT-72. DA/8000 Double acting Ø mm ISO/VDMA Cylinders DA/8000 Double acting Ø 32... 320 mm Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 High performance, ruggedness and reliability Extensive range of mountings Technical data Medium:

More information

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40% CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,

More information

Cylinders Series 61 - Aluminium profile

Cylinders Series 61 - Aluminium profile CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to

More information

AIR CYLINDER Series A23, A24

AIR CYLINDER Series A23, A24 A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings

More information

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552 Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder

More information

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»

More information

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,

More information

Aluminium tube and profile

Aluminium tube and profile > Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,

More information

Guide blocks for ISO/VDMA cylinders

Guide blocks for ISO/VDMA cylinders Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection

More information

RM/28000/M Roundline cylinders (ISO)

RM/28000/M Roundline cylinders (ISO) RM/28000/M Roundline cylinders (ISO) Single acting, ISO 6432 - Ø 10... 25 mm Magnetic piston as standard enerally conforms to ISO 6432 High strength, double crimped end cap design Corrosion resistant Nose

More information

1/96 N Our policy is one of continued research and development. We therefore reserve the right

1/96 N Our policy is one of continued research and development. We therefore reserve the right Roundline Cylinders Magnetic Piston Double cting 8 to 63 mm Very compact and shorter than the basic length of a corresponding ISO/VDM and roundline cylinder. Magnetic piston as standard provides a wide

More information

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2 6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6

More information

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm > Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the

More information

STANDARDISED MOUNTINGS

STANDARDISED MOUNTINGS STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction

More information

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the

More information

AIR CYLINDER Series A12, A13

AIR CYLINDER Series A12, A13 A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long

More information

Series 63 ISO cylinders

Series 63 ISO cylinders Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More

More information

Tie rod cylinders, Series 523

Tie rod cylinders, Series 523 Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")

More information

Aluminium profile. Double-acting, cushioned, magnetic ø mm

Aluminium profile. Double-acting, cushioned, magnetic ø mm > Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic

More information

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from

More information

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple

More information

Double acting, cushioned, magnetic Ø mm

Double acting, cushioned, magnetic Ø mm CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562

More information

Tie rods cylinders to ISO standard Ø

Tie rods cylinders to ISO standard Ø Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562

More information

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent

More information

NFPA Double acting imperial cylinders

NFPA Double acting imperial cylinders > > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,

More information

ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /

ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / / Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible

More information

M/146000/EX, M/146100/EX, M/146200/EX, LINTRA PLUS cylinder Magnetic & Non-magnetic piston, double acting

M/146000/EX, M/146100/EX, M/146200/EX, LINTRA PLUS cylinder Magnetic & Non-magnetic piston, double acting M/46000/X, M/4600/X, M/4600/X, LINTR PLUS cylinder > Ø 6... 80 mm > New lightweight design extrusion with universal mounting grooves > Proved and patented sealing system > Interchangeability with series

More information

M/146000, M/146100, M/146200

M/146000, M/146100, M/146200 LINTR PLUS rodless cylinders Magnetic piston and non-magnetic piston Double acting Ø 3 to 50 mm New lightweight design extrusion with universal mounting grooves Proved and patented sealing system Dust

More information

Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm

Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm > Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO

More information

AIR CYLINDER Series A25, A26

AIR CYLINDER Series A25, A26 A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.

More information

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and

More information

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different

More information

XG*-***-****-***-****

XG*-***-****-***-**** Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...

More information

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm > Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous

More information

M/ Rotary cylinders Rack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 125 mm

M/ Rotary cylinders Rack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 125 mm otary cylinders ack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 25 mm Suitable torques from,2 to 5,0 Nm/bar otation angles 90, 80, 270, 360 Adjustable cushioning Male and female

More information

M/46900/IA, M/46900/M

M/46900/IA, M/46900/M TWIN-LINTR Rodless Cylinders Non-magnetic and Magnetic Piston Double acting Ø 25 and 4 mm Double stroke compared with conventional cylinders Design covered by patent Maximum stroke length from minimal

More information

2. COMPACT CYLINDERS series STRONG (RS, RQ)

2. COMPACT CYLINDERS series STRONG (RS, RQ) 2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic

More information

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60 Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552

More information

Tie rods cylinders to ISO standard

Tie rods cylinders to ISO standard Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643

More information

STANDARDISED MOUNTINGS

STANDARDISED MOUNTINGS for PS / PLS / PC cylinders conforming ISO 15552-FNOR-DIN (PS-PLS) ISO 21287 (PC) standards Series 434 MOUNTINGS CONFORMING WITH ISO 21287 - ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications

More information

Sizes 32, 40, 50 and 63

Sizes 32, 40, 50 and 63 > Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary

More information

AIR CYLINDER Series A75, A76

AIR CYLINDER Series A75, A76 A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both

More information

-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.

-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...

More information

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm > Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI

More information

ACTUATORS equipment engineering advantage

ACTUATORS equipment engineering advantage www.norgren.com/rail RAILINE PNEUMATIC MOTION & FLUID CONTROL SOLUTIONS YOU CAN SEE OUR THINKING engineering advantage ACTUATORS valves pressure switches AND transducers air line equipment fittings tubing

More information

P1D-B Pneumatic Cylinders

P1D-B Pneumatic Cylinders P1D-B Pneumatic Cylinders According to ISO 15552 P1D-B series. This series features a profile design and is the basic ISO cylinder for simple applications where no special options are required. This series

More information

Associated ranges. Body material. Stainless steel Aluminium

Associated ranges. Body material. Stainless steel Aluminium Associated ranges Series Body material Stainless steel Aluminium KA/8000,.../M Stainless steel tie-rod cylinders (ISO/VDMA) Double acting Ø 32 to 200 mm 216 KM/8000/M Stainless steel roundline cylinders

More information

Twin Rod Non Rotate Cylinders RDV and AZ

Twin Rod Non Rotate Cylinders RDV and AZ Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double

More information

Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm

Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect

More information

VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring

VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides

More information

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of

More information

ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: Voting terminates on:

ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: Voting terminates on: FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 15552 ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: 218 1 17 Voting terminates on: 218 3 14 Pneumatic fluid power Cylinders with detachable mountings, 1

More information

Profile Design Air Cylinder

Profile Design Air Cylinder Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods

More information

ISO 6020/2 industricylindre Industrial cylinders

ISO 6020/2 industricylindre Industrial cylinders According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,

More information

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552 PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder

More information

Large Bore Extruded Cylinders, ISO 6431 Series 41

Large Bore Extruded Cylinders, ISO 6431 Series 41 Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series

More information

Standard cylinders DNG/DNGZS, ISO 15552

Standard cylinders DNG/DNGZS, ISO 15552 Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to

More information

Tube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table

Tube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston

More information

bar -20 C C ( C for high temperature version) 1000 mm

bar -20 C C ( C for high temperature version) 1000 mm Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature

More information

M/46800/M, M/46800/HM, M/46800/PM

M/46800/M, M/46800/HM, M/46800/PM External guides for heavy loads over long distances Rigid, reinforced aluminium profile provides greater load support T-slots in the outer profile enable individual mounting options Precision guidance

More information

HEAVY DUTY PNEUMATIC CYLINDERS

HEAVY DUTY PNEUMATIC CYLINDERS HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless

More information

Series 31 compact cylinders 1/

Series 31 compact cylinders 1/ Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting

More information

ISO Cylinders - P1D-B

ISO Cylinders - P1D-B Flange MF1/MF2 Intended for fixed mounting of cylinder. Flange can be fitted to front or rear end cover of cylinder. Materials Flange: Surface-treated steel Mounting screws acc. to DIN 6912: Zinc-plated

More information

ISO Technical details

ISO Technical details Cylinders > piston rod cylinders > assembly groups > BP IO 15552 Technical details Operating pressure Cylinder with brake system XBP brake system 3... 6 bar Temperature range -10 C... +50 C Max. stroke

More information

ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS

ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.

More information

M/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm

M/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm LINTRA Rodless cylinders Magnetic piston Double acting Ø 5 to 40 mm New compact, space-saving design Proven sealing system Integral switch mounting Adjustable cushioning Magentic piston as standard Technical

More information

Cylinders DSBG to ISO 15552

Cylinders DSBG to ISO 15552 Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless

More information

Standard cylinders DSBF-C, to ISO 15552, Clean Design

Standard cylinders DSBF-C, to ISO 15552, Clean Design Key features At a glance Design Easy to clean Easy to mount Flexible DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1

More information

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95 1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T

More information

Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned

Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned > Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25

More information

Series CP95 ø32, ø40, ø50, ø63, ø80, ø100

Series CP95 ø32, ø40, ø50, ø63, ø80, ø100 ISO Cylinder Series CP ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 6431, VDMA 2462, CETOP RP43P. CJ1 CJP CJ2 CM2 C8 C76 CG1 MB MB1 CP C C2 CA1 CS1 1.-1 Series CP Model Selection Execution Standard Type

More information