Short-stroke cylinders ADVC/AEVC
|
|
- Gavin Garrett
- 5 years ago
- Views:
Transcription
1 Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch from the Festo factory in 24 hours Held in stock in 13 service centres worldwide More than 2200 products wready for dispatch in 5 days maximum from stock Assembled for you in 4 service centres worldwide Up to 6 x variants per product series Look for the star! 2018/02 Subject to change Internet: 1
2 Short-stroke cylinders ADVC/AEVC Key features Brief description -N- Diameter mm -T- Stroke length mm Short-stroke cylinders are ideal for clamping tasks with short strokes, e.g. in retaining devices. The cylinders offer: Rapid response with applied pressure Large clamping forces in comparison to their size Minimal installation space Integrated sensor slots for contacting or contactless proximity sensors Mounting hole pattern to VDMA for mm Fitting space comparison with 10 mm stroke Sensor slots T-slot for proximity sensor SME/SMT-8 100% Standard cylinder DNC 45% Compact cylinder ADVU 33% Short-stroke cylinder ADVC C-slot for proximity sensor SME/ SMT-10 2 Internet: Subject to change 2018/02
3 Short-stroke cylinders ADVC/AEVC Type codes ADVC 6 5 A P A Type ADVC AEVC Double acting short stroke cylinder Single-acting short stroke cylinder Piston [mm] Stroke [mm] Piston rod thread A I Male thread Female thread Without thread Cushioning P Flexible cushioning rings/plates at both ends Position sensing A No position sensing For proximity sensing 2018/02 Subject to change Internet: 3
4 Short-stroke cylinders ADVC/AEVC Product range overview Function Version Type Piston Stroke Position sensing [mm] [mm] Doubleacting Without position sensing ADVC ; 5 6, 10, 12 5, 10 16, 20, 25 5, 10, 15, 20, 25 ADVC , 40 5, 10, 15, 20, 25 50, 63, 80, , 15, 20, 25 With position sensing ADVC-...-A , 10, 12 5, 10 16, 20, 25 5, 10, 15, 20, 25 ADVC-...-A , 40 5, 10, 15, 20, 25 50, 63, 80, , 15, 20, 25 Singleacting Without position sensing AEVC ; 5 6, 10, 12 5, 10 16, 20, 25 5, 10, 25 AEVC , 10, 25 40, 50, 63, 80, , 25 With position sensing AEVC-...-A , 10, 12 5, 10 16, 20, 25 5, 10, 25 AEVC-...-A , 10, 25 40, 50, 63, 80, , 25 4 Internet: Subject to change 2018/02
5 Short-stroke cylinders ADVC/AEVC Product range overview Type Piston rod Cushioning Page/Internet With male thread With female thread Without thread Without position sensing ADVC From ADVC With position sensing ADVC-...-A From ADVC-...-A Without position sensing AEVC From AEVC With position sensing AEVC-...-A From AEVC-...-A /02 Subject to change Internet: 5
6 Short-stroke cylinders ADVC/AEVC Peripherals overview mm aj 6 ab ac ad bf 9 af be aa ab ae af ag ai ah bj aj ba bd bc 5 bb mm Without position sensing mm With position sensing 6 Internet: Subject to change 2018/02
7 Short-stroke cylinders ADVC/AEVC Peripherals overview Mounting attachments and accessories Description Piston Page/Internet 4, 6, 12 10, Mounting screws Not included in scope of delivery DIN 84 1 Mounting screws Not included in scope of delivery for 80, Foot mounting For bearing and end caps HNC 3 Flange mounting For bearing or end caps FNC 4 Trunnion flange For bearing or end caps ZNCF 5 Trunnion support LNZG 6 Swivel flange For end caps SNC 7 Clevis foot With spherical bearing LSNG 8 Clevis foot Weld-on, with spherical bearing LSNSG 9 Swivel flange With spherical bearing for end caps SNCS aj Clevis foot LBG aa Swivel flange For end caps SNCL ab Swivel flange For end caps SNCB ac Clevis foot LNG ad Clevis foot With spherical bearing LSN ae af ag ah ai bj ba bb bc bd be bf Adapter kit DPNC Rod eye SGS Right-angle clevis foot LQG Rod clevis SGA Coupling piece KSG Rod clevis SG Self-aligning rod coupler FK Slot cover ABP-5-S Proximity sensors SME/SMT-8 Proximity sensors SME/SMT-10 One-way flow control valve GRLA Push-in fitting QS For connecting two cylinders with identical piston diameter to form a multi-position cylinder With spherical bearing With male thread For compensating radial deviations Permits a swivelling movement of the cylinder in one plane For compensating radial and angular deviations To protect the sensor cable and keep dirt out of the sensor slots Can be integrated in the cylinder profile barrel Can be integrated in the cylinder profile barrel To regulate speed For connecting compressed air tubing with standard external diameters DIN 912 DIN , 39, 40, 42, 43, 44, qs 2018/02 Subject to change Internet: 7
8 Short-stroke cylinders ADVC Technical data, double-acting without position sensing -N- Diameter mm -T- Stroke length mm General technical data Piston Pneumatic connection M3 M3 M5 M5 M5 M5 M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/4 Piston rod with female thread Piston rod with male thread Piston rod without thread Operating medium Compressed air in accordance with ISO :2010 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Constructional design Piston Piston rod Cushioning Flexible cushioning rings/plates at both ends Type of mounting Via through-holes Via through-holes Via accessories Mounting position Any Operating conditions Piston Operating pressure [bar] Ambient temperature [ C] Corrosion resistance class CRC 1) 1 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). 8 Internet: Subject to change 2018/02
9 Short-stroke cylinders ADVC Technical data, double-acting without position sensing Forces [N] and impact energy [J] Piston Theoretical force at 6 bar, advancing Theoretical force at 6 bar, returning Max. impact energy at end positions Product weight [g] Stroke [mm] Piston Moving load [g] Stroke [mm] Piston Materials Sectional view Short-stroke cylinder Cylinder barrel Anodised aluminium Anodised aluminium 2 Cover cap Anodised aluminium Anodised aluminium 3 Piston rod Anodised aluminium High-alloy steel 4 Rod seal Nitrile rubber Polyurethane Note on material Free of copper and PTFE Free of copper and PTFE 2018/02 Subject to change Internet: 9
10 Short-stroke cylinders ADVC Technical data, double-acting without position sensing Dimensions mm ADVC-...-I-P Piston rod with female thread Download CAD data -H- Note 4 mm Do not exceed maximum screw-in depth of 3 mm and maximum tightening torque of 0.7 Nm. 10 mm Depending on tolerance, the bearing cap may project by up to 0.65 mm. ADVC-...-A-P Piston rod with male thread 12 mm Depending on tolerance, the bearing cap may project by up to 0.35 mm. 1 No undercut with diameter 4/6/10. ADVC-...-P Piston rod without thread 10 Internet: Subject to change 2018/02
11 Short-stroke cylinders ADVC Technical data, double-acting without position sensing [mm] Stroke [mm] AF min. AM 0.5 D1 max. D2 E max. EE FB KF KK L M3 1.8 M M3 2.9 M M5 3.4 M H M5 3.4 M3 M H13 25 M5 4.5 M4 M H13 32 M5 5.5 M5 M H13 38 M5 5.5 M5 M L [mm] Stroke [mm] L4 L5 L6 max. MM P1 PL T4 TG ±0.1 UO max. WH ZJ ±0.8 ß /02 Subject to change Internet: 11
12 Short-stroke cylinders ADVC Technical data, double-acting without position sensing Dimensions mm Download CAD data ADVC-...-I-P Piston rod with female thread ADVC-...-A-P** Piston rod with male thread [mm] AF min. AM 0.5 BG* min. D2 F9 E max. EE FB H KF KK G1/ M6 M10x G1/ M6 M10x G1/ M8 M12x G1/ M8 M12x G1/ M10 M16x G1/ M12 M20x1.5 * Continuous thread with short overall length ** Nut for piston rod thread included in scope of delivery 12 Internet: Subject to change 2018/02
13 Short-stroke cylinders ADVC Technical data, double-acting without position sensing [mm] Stroke [mm] L L3 MM P1 PL RT T4 TG M M M M M M ±0.1 WH ZJ ±0.8 ß /02 Subject to change Internet: 13
14 Short-stroke cylinders ADVC Technical data, double-acting without position sensing qcore product range Ordering data Type Piston Stroke Piston rod with male thread Piston rod with female thread [mm] [mm] Part No. Type Part No. Type 12 5 q ADVC-12-5-A-P q ADVC-12-5-I-P 10 q ADVC A-P q ADVC I-P 16 5 q ADVC-16-5-A-P q ADVC-16-5-I-P 10 q ADVC A-P q ADVC I-P 15 q ADVC A-P q ADVC I-P 20 q ADVC A-P q ADVC I-P 25 q ADVC A-P q ADVC I-P 20 5 q ADVC-20-5-A-P q ADVC-20-5-I-P 10 q ADVC A-P q ADVC I-P 15 q ADVC A-P q ADVC I-P 20 q ADVC A-P q ADVC I-P 25 q ADVC A-P q ADVC I-P 25 5 q ADVC-25-5-A-P q ADVC-25-5-I-P 10 q ADVC A-P q ADVC I-P 15 q ADVC A-P q ADVC I-P 20 q ADVC A-P q ADVC I-P 25 q ADVC A-P q ADVC I-P Ordering data Type Piston Stroke Piston rod with male thread Piston rod with female thread [mm] [mm] Part No. Type Part No. Type 32 5 q ADVC-32-5-A-P q ADVC-32-5-I-P 10 q ADVC A-P q ADVC I-P 15 q ADVC A-P q ADVC I-P 20 q ADVC A-P q ADVC I-P 25 q ADVC A-P q ADVC I-P 40 5 q ADVC-40-5-A-P q ADVC-40-5-I-P 10 q ADVC A-P q ADVC I-P 15 q ADVC A-P q ADVC I-P 20 q ADVC A-P q ADVC I-P 25 q ADVC A-P q ADVC I-P q ADVC A-P q ADVC I-P 15 q ADVC A-P q ADVC I-P 20 q ADVC A-P q ADVC I-P 25 q ADVC A-P q ADVC I-P q ADVC A-P q ADVC I-P 15 q ADVC A-P q ADVC I-P 20 q ADVC A-P q ADVC I-P 25 q ADVC A-P q ADVC I-P Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 14 Internet: Subject to change 2018/02
15 Short-stroke cylinders ADVC Technical data, double-acting without position sensing Ordering data Type Piston Stroke Piston rod with male thread Piston rod without thread [mm] [mm] Part No. Type Part No. Type ADVC-4-2,5-A-P ADVC-4-2,5-P ADVC-4-5-A-P ADVC-4-5-P ADVC-6-5-A-P ADVC-6-5-P ADVC-6-10-A-P ADVC-6-10-P ADVC-10-5-A-P ADVC-10-5-P ADVC A-P ADVC P ADVC-12-5-P ADVC P Ordering data Type Piston Stroke Piston rod with male thread Piston rod with female thread [mm] [mm] Part No. Type Part No. Type ADVC A-P ADVC I-P ADVC A-P ADVC I-P ADVC A-P ADVC I-P ADVC A-P ADVC I-P ADVC A-P ADVC I-P ADVC A-P ADVC I-P ADVC A-P ADVC I-P ADVC A-P ADVC I-P 2018/02 Subject to change Internet: 15
16 Short-stroke cylinders ADVC Technical data, double-acting with position sensing -N- Diameter mm -T- Stroke length mm General technical data Piston Pneumatic connection M3 M5 M5 M5 M5 M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/4 Piston rod with female thread Piston rod with male thread Piston rod without thread Operating medium Compressed air in accordance with ISO :2010 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Constructional design Piston Piston rod Cushioning Flexible cushioning rings/plates at both ends Position sensing For proximity sensing Type of mounting Via through-holes Via through-holes Via accessories Mounting position Any Operating conditions Piston Operating pressure [bar] Ambient temperature [ C] (note operating range of proximity sensors) Corrosion resistance class CRC 1) 1 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). 16 Internet: Subject to change 2018/02
17 Short-stroke cylinders ADVC Technical data, double-acting with position sensing Forces [N] and impact energy [J] Piston Theoretical force at 6 bar, advancing Theoretical force at 6 bar, returning Max. impact energy at end positions Product weight [g] Stroke [mm] Piston Moving load [g] Stroke [mm] Piston Materials Sectional view Short-stroke cylinder 1 Cylinder barrel Anodised aluminium 2 Cover cap Anodised aluminium 3 Piston rod High-alloy steel 4 Rod seal Polyurethane Note on material Free of copper and PTFE 2018/02 Subject to change Internet: 17
18 Short-stroke cylinders ADVC Technical data, double-acting with position sensing Dimensions mm ADVC-...-I-P-A Piston rod with female thread Download CAD data -H- Note 10 mm Depending on tolerance, the bearing cap may project by up to 0.65 mm. 12 mm Depending on tolerance, the bearing cap may project by up to 0.35 mm. ADVC-...-A-P-A Piston rod with male thread 1 No undercut with diameter 6/10. ADVC-...-P-A Piston rod without thread 1 Slot for proximity sensor SME/SMT-10 [mm] Stroke [mm] AF min. AM 0.5 D1 max. D2 E max. EE FB KF KK L M3 2.9 M M5 3.4 M H13 24 M5 3.4 M3 M H13 28 M5 4.5 M4 M H13 32 M5 5.5 M5 M H13 38 M5 5.5 M5 M L Internet: Subject to change 2018/02
19 Short-stroke cylinders ADVC Technical data, double-acting with position sensing [mm] Stroke [mm] L4 L5 L6 max. MM P1 PL T4 TG ±0.1 UO max. WH ZJ ±0.8 ß /02 Subject to change Internet: 19
20 Short-stroke cylinders ADVC Technical data, double-acting with position sensing Dimensions mm Download CAD data ADVC-...-I-P-A Piston rod with female thread ADVC-...-A-P-A** Piston rod with male thread 1 Slot for proximity sensor SME/SMT-8 2 Slot for proximity sensor SME/SMT-10 [mm] AF min. AM 0.5 BG* min. D2 F9 E max. EE FB H KF KK G1/ M6 M10x G1/ M6 M10x G1/ M8 M12x G1/ M8 M12x G1/ M10 M16x G1/ M12 M20x1.5 * Continuous thread with short overall length ** Nut for piston rod thread included in scope of delivery 20 Internet: Subject to change 2018/02
21 Short-stroke cylinders ADVC Technical data, double-acting with position sensing [mm] Stroke [mm] L L3 MM P1 PL RT T4 TG M M M M M M ±0.1 WH ZJ ±0.8 ß1 2018/02 Subject to change Internet: 21
22 Short-stroke cylinders ADVC Technical data, double-acting with position sensing qcore product range Ordering data Type Piston Stroke Piston rod with male thread Piston rod with female thread [mm] [mm] Part No. Type Part No. Type 12 5 q ADVC-12-5-A-P-A q ADVC-12-5-I-P-A 10 q ADVC A-P-A q ADVC I-P-A 16 5 q ADVC-16-5-A-P-A q ADVC-16-5-I-P-A 10 q ADVC A-P-A q ADVC I-P-A 15 q ADVC A-P-A q ADVC I-P-A 20 q ADVC A-P-A q ADVC I-P-A 25 q ADVC A-P-A q ADVC I-P-A 20 5 q ADVC-20-5-A-P-A q ADVC-20-5-I-P-A 10 q ADVC A-P-A q ADVC I-P-A 15 q ADVC A-P-A q ADVC I-P-A 20 q ADVC A-P-A q ADVC I-P-A 25 q ADVC A-P-A q ADVC I-P-A 25 5 q ADVC-25-5-A-P-A q ADVC-25-5-I-P-A 10 q ADVC A-P-A q ADVC I-P-A 15 q ADVC A-P-A q ADVC I-P-A 20 q ADVC A-P-A q ADVC I-P-A 25 q ADVC A-P-A q ADVC I-P-A Ordering data Type Piston Stroke Piston rod with male thread Piston rod with female thread [mm] [mm] Part No. Type Part No. Type 32 5 q ADVC-32-5-A-P-A q ADVC-32-5-I-P-A 10 q ADVC A-P-A q ADVC I-P-A 15 q ADVC A-P-A q ADVC I-P-A 20 q ADVC A-P-A q ADVC I-P-A 25 q ADVC A-P-A q ADVC I-P-A 40 5 q ADVC-40-5-A-P-A q ADVC-40-5-I-P-A 10 q ADVC A-P-A q ADVC I-P-A 15 q ADVC A-P-A q ADVC I-P-A 20 q ADVC A-P-A q ADVC I-P-A 25 q ADVC A-P-A q ADVC I-P-A q ADVC A-P-A q ADVC I-P-A 15 q ADVC A-P-A q ADVC I-P-A 20 q ADVC A-P-A q ADVC I-P-A 25 q ADVC A-P-A q ADVC I-P-A q ADVC A-P-A q ADVC I-P-A 15 q ADVC A-P-A q ADVC I-P-A 20 q ADVC A-P-A q ADVC I-P-A 25 q ADVC A-P-A q ADVC I-P-A Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 22 Internet: Subject to change 2018/02
23 Short-stroke cylinders ADVC Technical data, double-acting with position sensing Ordering data Type Piston Stroke Piston rod with male thread Piston rod without thread [mm] [mm] Part No. Type Part No. Type ADVC-6-5-A-P-A ADVC-6-5-P-A ADVC-6-10-A-P-A ADVC-6-10-P-A ADVC-10-5-A-P-A ADVC-10-5-P-A ADVC A-P-A ADVC P-A ADVC-12-5-P-A ADVC P-A Ordering data Type Piston Stroke Piston rod with male thread Piston rod with female thread [mm] [mm] Part No. Type Part No. Type ADVC A-P-A ADVC I-P-A ADVC A-P-A ADVC I-P-A ADVC A-P-A ADVC I-P-A ADVC A-P-A ADVC I-P-A ADVC A-P-A ADVC I-P-A ADVC A-P-A ADVC I-P-A ADVC A-P-A ADVC I-P-A ADVC A-P-A ADVC I-P-A 2018/02 Subject to change Internet: 23
24 Short-stroke cylinders AEVC Technical data, single-acting without position sensing -N- Diameter mm -T- Stroke length mm General technical data Piston Pneumatic connection M3 M3 M5 M5 M5 M5 M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/4 Piston rod with female thread Piston rod with male thread Piston rod without thread Operating medium Compressed air in accordance with ISO :2010 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Constructional design Piston Piston rod Cushioning Flexible cushioning rings/plates at both ends Type of mounting Via through-holes Via through-holes Via accessories Mounting position Any Operating conditions Piston Operating pressure [bar] Ambient temperature [ C] Corrosion resistance class CRC 1) 1 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). 24 Internet: Subject to change 2018/02
25 Short-stroke cylinders AEVC Technical data, single-acting without position sensing Forces [N] and impact energy [J] Piston Theoretical force at 6 bar, advancing Theoretical force at 6 bar, returning ) Max. impact energy at end positions ) AEVC = 5 N -H- Note The degree of friction depends upon the mounting position, and the type of load involved. Single-acting cylinders should as far as possible be operated without lateral forces. Product weight [g] Stroke [mm] Piston Moving load [g] Stroke [mm] Piston Materials Sectional view Short-stroke cylinder Cylinder barrel Anodised aluminium Anodised aluminium 2 Cover cap Anodised aluminium Anodised aluminium 3 Piston rod Anodised aluminium High-alloy steel 4 Rod seal Nitrile rubber Polyurethane Note on material Free of copper and PTFE Free of copper and PTFE 2018/02 Subject to change Internet: 25
26 Short-stroke cylinders AEVC Technical data, single-acting without position sensing Dimensions mm AEVC-...-I-P Piston rod with female thread Download CAD data -H- Note 10 mm Depending on tolerance, the bearing cap may project by up to 0.65 mm. 12 mm Depending on tolerance, the bearing cap may project by up to 0.35 mm. AEVC-...-A-P Piston rod with male thread 1 No undercut with diameter 4/6/10. AEVC-...-P Piston rod without thread 26 Internet: Subject to change 2018/02
27 Short-stroke cylinders AEVC Technical data, single-acting without position sensing Stroke AF AM D1 D2 E EE FB KF KK L2 L3 [mm] [mm] min. 0.5 max. max M3 1.8 M M3 2.9 M M5 3.4 M H M5 3.4 M3 M H13 25 M5 4.5 M4 M H13 32 M5 5.5 M5 M H13 38 M5 5.5 M5 M Stroke L4 L5 L6 MM PL T4 TG UO WH ZJ ß1 [mm] [mm] max. ±0.1 max. ± /02 Subject to change Internet: 27
28 Short-stroke cylinders AEVC Technical data, single-acting without position sensing Dimensions mm AEVC-...-I-P Piston rod with female thread Download CAD data AEVC-...-A-P** Piston rod with male thread Stroke AF AM BG* D2 E EE FB H KF KK L2 L3 MM PL RT T4 TG WH ZJ ß1 [mm] [mm] min. 0.5 min. F9 max ±0.1 ± G1/ M6 M10x M G1/ M6 M10x M G1/ M8 M12x M G1/ M8 M12x M G1/ M10 M16x M G1/ M12 M20x M * Continuous thread with short overall length ** Nut for piston rod thread included in scope of delivery 28 Internet: Subject to change 2018/02
29 Short-stroke cylinders AEVC Technical data, single-acting without position sensing Ordering data Type Piston Stroke Piston rod with male thread Piston rod with female thread [mm] [mm] Part No. Type Part No. Type 12 5 q AEVC-12-5-A-P q AEVC-12-5-I-P 10 q AEVC A-P q AEVC I-P 16 5 q AEVC-16-5-A-P q AEVC-16-5-I-P 10 q AEVC A-P q AEVC I-P 25 q AEVC A-P q AEVC I-P 20 5 q AEVC-20-5-A-P q AEVC-20-5-I-P 10 q AEVC A-P q AEVC I-P 25 q AEVC A-P q AEVC I-P 25 5 q AEVC-25-5-A-P q AEVC-25-5-I-P 10 q AEVC A-P q AEVC I-P 25 q AEVC A-P q AEVC I-P Ordering data Type Piston Stroke Piston rod with male thread Piston rod with female thread [mm] [mm] Part No. Type Part No. Type 32 5 q AEVC-32-5-A-P q AEVC-32-5-I-P 10 q AEVC A-P q AEVC I-P 25 q AEVC A-P q AEVC I-P q AEVC A-P q AEVC I-P 25 q AEVC A-P q AEVC I-P q AEVC A-P q AEVC I-P 25 q AEVC A-P q AEVC I-P q AEVC A-P q AEVC I-P 25 q AEVC A-P q AEVC I-P Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2018/02 Subject to change Internet: 29
30 Short-stroke cylinders AEVC Technical data, single-acting without position sensing Ordering data Type Piston Stroke Piston rod with male thread Piston rod without thread [mm] [mm] Part No. Type Part No. Type AEVC-4-2,5-A-P AEVC-4-2,5-P AEVC-4-5-A-P AEVC-4-5-P AEVC-6-5-A-P AEVC-6-5-P AEVC-6-10-A-P AEVC-6-10-P AEVC-10-5-A-P AEVC-10-5-P AEVC A-P AEVC P AEVC-12-5-P AEVC P Ordering data Type Piston Stroke Piston rod with male thread Piston rod with female thread [mm] [mm] Part No. Type Part No. Type AEVC A-P AEVC I-P AEVC A-P AEVC I-P AEVC A-P AEVC I-P AEVC A-P AEVC I-P 30 Internet: Subject to change 2018/02
31 Short-stroke cylinders AEVC Technical data, single-acting with position sensing -N- Diameter mm -T- Stroke length mm General technical data Piston Pneumatic connection M3 M5 M5 M5 M5 M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/4 Piston rod with female thread Piston rod with male thread Piston rod without thread Operating medium Compressed air in accordance with ISO :2010 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Constructional design Piston Piston rod Cushioning Flexible cushioning rings/plates at both ends Position sensing For proximity sensing Type of mounting Via through-holes Via through-holes Via accessories Mounting position Any Operating conditions Piston Operating pressure [bar] Ambient temperature [ C] (note operating range of proximity sensors) Corrosion resistance class CRC 1) 1 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). 2018/02 Subject to change Internet: 31
32 Short-stroke cylinders AEVC Technical data, single-acting with position sensing Forces [N] and impact energy [J] Piston Theoretical force at 6 bar, advancing Theoretical force at 6 bar, returning ) Max. impact energy at end positions ) AEVC = 5 N -H- Note The degree of friction depends upon the mounting position, and the type of load involved. Single-acting cylinders should as far as possible be operated without lateral forces. Product weight [g] Stroke [mm] Piston Moving load [g] Stroke [mm] Piston Materials Sectional view Short-stroke cylinder 1 Cylinder barrel Anodised aluminium 2 Cover cap Anodised aluminium 3 Piston rod High-alloy steel 4 Rod seal Polyurethane Note on material Free of copper and PTFE 32 Internet: Subject to change 2018/02
33 Short-stroke cylinders AEVC Technical data, single-acting with position sensing Dimensions mm AEVC-...-I-P-A Piston rod with female thread Download CAD data -H- Note 10 mm Depending on tolerance, the bearing cap may project by up to 0.65 mm. 12 mm Depending on tolerance, the bearing cap may project by up to 0.35 mm. AEVC-...-A-P-A Piston rod with male thread 1 No undercut with diameter 6/10. AEVC-...-P-A Piston rod without thread 1 Slot for proximity sensor SME/SMT /02 Subject to change Internet: 33
34 Short-stroke cylinders AEVC Technical data, single-acting with position sensing Stroke AF AM D1 D2 E EE FB KF KK L2 L3 [mm] [mm] min. 0.5 max. max M3 2.9 M M5 3.4 M H13 24 M5 3.4 M3 M H13 28 M5 4.5 M4 M H13 32 M5 5.5 M5 M H13 38 M5 5.5 M5 M Stroke L4 L5 L6 MM PL T4 TG UO WH ZJ ß1 [mm] [mm] max. ±0.1 max. ± Internet: Subject to change 2018/02
35 Short-stroke cylinders AEVC Technical data, single-acting with position sensing Dimensions mm Download CAD data AEVC-...-I-P-A Piston rod with female thread AEVC-...-A-P-A** Piston rod with male thread 1 Slot for proximity sensor SME/SMT-8 2 Slot for proximity sensor SME/SMT-10 Stroke AF AM BG* D2 E EE FB H KF KK L2 L3 MM PL RT T4 TG WH ZJ ß1 [mm] min. 0.5 min. F9 max ±0.1 ± G1/ M6 M10x M G1/ M6 M10x M G1/ M8 M12x M G1/ M8 M12x M G1/ M10 M16x M G1/ M12 M20x M * Continuous thread with short overall length ** Nut for piston rod thread included in scope of delivery 2018/02 Subject to change Internet: 35
36 Short-stroke cylinders AEVC Technical data, single-acting with position sensing Ordering data Type Piston Stroke Piston rod with male thread Piston rod with female thread Piston rod without thread [mm] [mm] Part No. Type Part No. Type Part No. Type AEVC-6-5-A-P-A AEVC-6-5-P-A AEVC-6-10-A-P-A AEVC-6-10-P-A AEVC-10-5-A-P-A AEVC-10-5-P-A AEVC A-P-A AEVC P-A AEVC-12-5-A-P-A AEVC-12-5-I-P-A AEVC-12-5-P-A AEVC A-P-A AEVC I-P-A AEVC P-A AEVC-16-5-A-P-A AEVC-16-5-I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A AEVC-20-5-A-P-A AEVC-20-5-I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A AEVC-25-5-A-P-A AEVC-25-5-I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A Ordering data Type Piston Stroke Piston rod with male thread Piston rod with female thread [mm] [mm] Part No. Type Part No. Type AEVC-32-5-A-P-A AEVC-32-5-I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A AEVC A-P-A AEVC I-P-A 36 Internet: Subject to change 2018/02
37 Short-stroke cylinders ADVC/AEVC Accessories Adapter kit DPNC Material: Flange: Wrought aluminium alloy Threaded studs, hex nuts: Galvanised steel Free of copper and PTFE RoHS-compliant + = plus stroke length Dimensions and ordering data For Stroke F1 ZJ Weight Part No. Type without position sensing with position sensing [mm] [mm] ADVC AEVC ADVC AEVC [g] DPNC-32 10, 15, 20, , DPNC-40 15, 20, DPNC-50 15, 20, DPNC-63 15, 20, , 15, 20, DPNC , 15, 20, DPNC-100 Connecting two cylinders with identical piston as a 3 or 4-position cylinder A 3 or 4-position cylinder consists of two separate cylinders whose piston rods advance in opposing directions. This means that depending upon actuation and stroke pattern, this type of cylinder can assume up to four positions. In each case the cylinder is driven precisely against a stop. Note that when one end of the piston rod is fixed, the cylinder barrel executes the movement. The cylinder must be connected with flexible line connections. To achieve 3 positions Two cylinders with identical stroke length must be connected together. To achieve 4 positions Two cylinders with different stroke lengths must be connected together. 2018/02 Subject to change Internet: 37
38 Short-stroke cylinders ADVC/AEVC Accessories Foot mounting HNC Material: Galvanised steel Free of copper and PTFE + = plus stroke length Dimensions and ordering data For Stroke AB AH AO AT AU SA TR US without position sensing with position sensing [mm] [mm] ADVC AEVC ADVC AEVC , 15, 20, , , 20, , 20, , 20, , 15, 20, , 15, 20, For Stroke XA XS CRC 1) Weight Part No. Type without position sensing with position sensing without position sensing with position sensing [mm] [mm] ADVC AEVC ADVC AEVC ADVC AEVC ADVC AEVC [g] q HNC-32 10, 15, 20, , q HNC-40 15, 20, q HNC-50 15, 20, q HNC-63 15, 20, , 15, 20, q HNC , 15, 20, HNC-100 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. -H- Note Screws with special lengths are required to fit the sizes 80 mm and 100 mm. 80, 100: M10x30 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 38 Internet: Subject to change 2018/02
39 Short-stroke cylinders ADVC/AEVC Accessories Flange mounting FNC Material: Galvanised steel Free of copper and PTFE RoHS-compliant + = plus stroke length Dimensions and ordering data For Stroke D1 E FB MF R TF UF [mm] [mm] H11 H , 15, 20, , , 20, , 20, , 20, , 15, 20, , 15, 20, For Stroke ZF CRC 1) Weight Part No. Type without position sensing with position sensing [mm] [mm] ADVC AEVC ADVC AEVC [g] q FNC-32 10, 15, 20, , q FNC-40 15, 20, q FNC-50 15, 20, q FNC-63 15, 20, , 15, 20, q FNC , 15, 20, FNC-100 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). -H- Note Screws with special lengths are required to fit the sizes 80 mm and 100 mm. 80, 100: M10x30 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2018/02 Subject to change Internet: 39
40 Short-stroke cylinders ADVC/AEVC Accessories Trunnion flange ZNCF Material: Special steel casting Free of copper and PTFE RoHS-compliant + = plus stroke length Dimensions and ordering data For Stroke C2 C3 D1 TD TK TL TM US XH [mm] [mm] H11 e , 15, 20, , , 20, , 20, , 20, , 15, 20, , 15, 20, For Stroke XL CRC 1) Weight Part No. Type without position sensing with position sensing [mm] [mm] ADVC AEVC ADVC AEVC [g] ZNCF-32 10, 15, 20, , ZNCF-40 15, 20, ZNCF-50 15, 20, ZNCF-63 15, 20, , 15, 20, ZNCF , 15, 20, ZNCF-100 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. -H- Note Screws with special lengths are required to fit the sizes 80 mm and 100 mm. 80: M10x40 100: M10x50 40 Internet: Subject to change 2018/02
41 Short-stroke cylinders ADVC/AEVC Accessories Trunnion support LNZG Material: Trunnion support: Anodised aluminium Plain bearing: Plastic Free of copper and PTFE RoHS-compliant Dimensions and ordering data For CR DA FK FN FS H1 HB KE NH TH UL CRC 1) Weight Part No. Type [mm] D11 H13 ±0.1 H13 ±0.2 [g] LNZG-32 40, LNZG-40/50 63, LNZG-63/ LNZG-100/125 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. 2018/02 Subject to change Internet: 41
42 Short-stroke cylinders ADVC/AEVC Accessories Swivel flange SNC Material: Die-cast aluminium Free of copper and PTFE RoHS-compliant + = plus stroke length 1 The pivot pin is secured against rotation with a dowel pin Dimensions and ordering data For Stroke CG CP EK FL L SR [mm] [mm] H14 h14 h9 ± , 15, 20, , , 20, , 20, , 20, , 15, 20, , 15, 20, For Stroke XC CRC 1) Weight Part No. Type without position sensing with position sensing [mm] [mm] ADVC AEVC ADVC AEVC [g] q SNC-32 10, 15, 20, , q SNC-40 15, 20, q SNC-50 15, 20, q SNC-63 15, 20, , 15, 20, q SNC , 15, 20, SNC-100 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). -H- Note Screws with special lengths are required to fit the sizes 80 mm and 100 mm. 80, 100: M10x30 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 42 Internet: Subject to change 2018/02
43 Short-stroke cylinders ADVC/AEVC Accessories Swivel flange SNCB Material: Die-cast aluminium Free of copper and PTFE RoHS-compliant + = plus stroke length Dimensions and ordering data For Stroke CB EK FL L ML MR UB [mm] [mm] H14 e8 ±0.2 h , 15, 20, , , 20, , 20, , 20, , 15, 20, , 15, 20, For Stroke XC CRC 1) Weight Part No. Type without position sensing with position sensing [mm] [mm] ADVC AEVC ADVC AEVC [g] q SNCB-32 10, 15, 20, , q SNCB-40 15, 20, q SNCB-50 15, 20, q SNCB-63 15, 20, , 15, 20, q SNCB , 15, 20, SNCB-100 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. -H- Note Screws with special lengths are required to fit the sizes 80 mm and 100 mm. 80, 100: M10x30 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2018/02 Subject to change Internet: 43
44 Short-stroke cylinders ADVC/AEVC Accessories Swivel flange SNCS Material: SNCS 32 50: Die-cast aluminium SNCS : Wrought aluminium alloy Free of copper and PTFE RoHS-compliant + = plus stroke length Dimensions and ordering data For Stroke CN E EP EX FL LT MS RA TG [mm] [mm] ±0.2 ± , 15, 20, / , 10 15, 20, , 20, , 20, ,5± , 15, 20, ,2± , 15, 20, / ± For Stroke XC CRC 1) Weight Part No. Type without position sensing with position sensing [mm] [mm] ADVC AEVC ADVC AEVC [g] q SNCS , 15, 20, , q SNCS , 20, q SNCS , 20, q SNCS , 20, , 15, 20, q SNCS , 15, 20, SNCS-100 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. -H- Note Screws with special lengths are required to fit the sizes 80 mm and 100 mm. 80, 100: M10x30 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 44 Internet: Subject to change 2018/02
Standard cylinders DNCB, ISO 15552
Standard cylinders DNCB, ISO 15552 Features At a glance Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290)
More informationMulti-position cylinders/adapter kits
Multi-position cylinders/adapter kits Multi-position cylinders ADNM Product range overview Function Version Type Piston Max. stroke Piston rod With female thread With male thread Doubleacting ADNM Single-ended
More informationClamping-unit cylinders, standard port pattern
Key features At a glance Clamping units are generally used for the friction locking of longitudinally variable rods at any position. The attachment of a clamping unit to a pneumatic cylinder allows the
More informationTandem/high-force cylinders
Tandem/high-force cylinders Tandem/high-force cylinders Product range overview Function Version Type Piston Stroke Position sensing Piston rod With male thread A Doubleacting Tandem cylinders DNCT 32,
More informationStandard cylinders DNC-C180, to ISO 15552
Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and
More informationFlat cylinders EZH/DZF/DZH
Flat cylinders EZH/DZF/DZH Extremely flat design Protected against torsion thanks to special piston shape Compact assembly with block mounting Wide variety of mounting options 2017/10 Subject to change
More informationCompact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation
More informationCompact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
More informationStandard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
More informationLinear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
More informationCompact cylinders ADVUL
Piston rod secured against rotation by means of guide rods and yoke plate Profile slots for proximity sensors Extensive range of accessories 2016/03 Subject to change Internet: www.festo.com/catalog/...
More informationCylinders DSBG to ISO 15552
Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless
More informationCompact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Key features At a glance Sensor slots on three sides for flush mounting of proximity sensors Centring hole in the end cap
More informationCartridge cylinders EGZ
Peripherals overview and type codes 7 Installation without mounting attachments Minimal installation space required 4 3 2 1 Mounting attachments and accessories Description 1 Swivel mounting WBN 2 Flange
More informationStandard cylinders DSBG, to ISO 15552
Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless
More informationStandard Cylinders DNC Inch Series, to ISO 15552
Standard Cylinders DNC Inch Series, to ISO 5552 DNC Standard Cylinders meet ISO 5552 mounting, rod, bore and thread dimension specifications for easy interchangeability. Piston ¼ to 2½ Strokes of up to
More informationRound cylinders DSNU/ESNU
Round cylinders DSNU/ESNU q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationStandard cylinders DNC-C180, to ISO 15552
-U- Type discontinued Available up until 2016 Standard cylinders DNC-C180, to ISO 15552 Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552
More informationStandard cylinders DNC, ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction
More informationStandard cylinders DNC, ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction
More informationStandard cylinders DNCI, with measured-value transducer DADE
Features Components for positioning and measuring using the standard cylinder DNCI Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX
More informationPiston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationGuided drives DFM/DFM-B
Guided drives DFM/DFM-B q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationRound cylinders DSNU/ESNU
Round cylinders DSNU/ESNU Reacts quickly thanks to minimal break-away force Meets the highest requirements for running characteristics, service life and load carrying ability Extensive range of accessories
More information-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.
Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...
More informationStandards-based cylinders DSBG to ISO 15552
Standards-based cylinders DSBG to ISO 15552 Standards-based cylinders DSBG to ISO 15552 Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431,
More informationStandard cylinders DSBC, to ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290) Double-acting For contactless
More informationFAST Program 2013 Festo Assured Shipping Time
FAST Program 203 Festo Assured Shipping Time TM A complete line of automation components available when you need them! FAST TM Program 203 Festo Assured Shipping Time A complete line of automation components
More informationCompact cylinders CDC, ISO 21287, Clean Design
Key features Design Easy to clean Easy to assemble Versatile With the CDC (Clean Design Compact) cylinder series, the ADN modular system has been expanded to include an easy to clean compact cylinder variant
More informationSlide units SPZ, twin piston
Key features Multi-axis and drive combinations The slide unit SPZ can be combined with different drives. An adapter kit is required for mounting between the two drives. DPZ-/SPZ axis Adapter kits www.festo.com
More informationGuided drives DFM/DFM-B
Guided drives DFM/DFM-B q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationStandards-based cylinders DSBC, to ISO 15552
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationRound cylinders DSNU/DSNUP/DSN/ESNU/ESN
Round cylinders DSNU/DSNUP/DSN/ESNU/ESN Round cylinders DSNU/DSNUP/DSN/ESNU/ESN Key features At a glance DSNU-8 63 DSNU-8 25 Stainless steel piston rod Good running performance and long service Piston
More informationCheck valves H/HA/HB/HGL
Check valves H/HA/HB/HGL q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationPiston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationSemi-rotary drives DRQ
Features 40 100 mm 16 32 mm Rotating and swivelling The linear movement of the cylinder is converted into rotational movement by a backlash-compensating gear unit. Precision is increased by backlashfree
More informationCompact Cylinders ADN Inch Series, Based on ISO Overview
Compact Cylinders ADN Inch Series, Based on ISO 2287 Overview Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation space
More informationStandard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance Design Easy to clean Easy to mount Flexible DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1
More informationStandard cylinders DDPC, with measured-value transducer DADE
Features Components for positioning and measuring using the standard cylinder DDPC Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX
More informationFAST TM Program Festo Assured Shipping Time
FAST TM Program Festo Assured Shipping Time A complete line of automation components available when you need them! Maximum productivity for you and your customers - this is our mission. We all face the
More informationLinear drives DGC-K. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationStandard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NF E 49 003.1 and UNI 10290) The standard cylinder is used
More informationThreaded fittings. Festo core product range Covers 80% of your automation tasks
Threaded fittings q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationLinear drives DGC. Festo core product range Covers 80% of your automation tasks
Linear drives DGC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationStandard cylinders DNCB, ISO 15552
-U- Type discontinued Available up until 2012 Standard cylinders DNCB, ISO 15552 Features At a glance Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431,
More informationPiston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationSilencers. Festo core product range Covers 80% of your automation tasks
Silencers q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
More informationElectric cylinders EPCO, with spindle drive
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationClamping cartridges/units
Clamping cartridges/units Holding, clamping and braking of round material Wide choice of variants Any assembly position 2017/11 Subject to change Internet: www.festo.com/catalogue/... 1 Clamping cartridges/units
More informationLinear actuators DLP, Copac
Key features and type codes General -N- Diameter 80... 320 mm -T- Stroke length 40... 600 mm, additional stroke lengths upon request -O- Force 2800... 48000 N Festo Copac linear valve actuators are ideally
More informationCompact cylinders ADN-S, AEN-S
Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece
More informationFeed separators HPVS
Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top
More informationSwivel modules DSM/DSM-B
Swivel modules DSM/DSM-B Swivel modules DSM/DSM-B Key features At a glance Double-acting swivel module with rotary vanes The swivel angle is infinitely adjustable over the entire swivel range High precision
More informationSemi-rotary drives DRVS
Key features Key features at a glance Double-acting semi-rotary drive with rotary vanes Lighter than other semi-rotary drives Modern and compact design Fixed swivel angle Swivel angle can be adjusted with
More informationSquare profile cylinders DNC - Inch Series
Piston 1-1/4 to 5 Standard strokes up to 20 Variable strokes up to 80 Double-acting Numerous variants Repairable Product range overview Function Design Piston Standard Stroke Available Stroke [lbf] P PPV
More informationSwivel/linear drive units DSL-B
Key features At a glance High repetition accuracy thanks to cushioning components with fixed stop Swivel angle can be infinitely and accurately set The mechanical gearing between the stop element and swivel
More informationLinear actuators DFPI
Linear actuators DFPI Linear actuators DFPI Key features General information Linear actuator for actuating process valves such as gate valves and shut-off valves in process automation systems Linear actuator
More information-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
More informationQuarter turn actuators DFPD
Quarter turn actuators DFPD q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More information-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationShort-stroke cylinders ADNE-LAS, with linear motor
Key features At a glance Properties Electric short-stroke cylinder with integrated linear motor, specifically designed for dynamic movements between two end positions A cycle of advancing and retracing
More informationHinge cylinders DW Key features
Key features At a glance Hinge cylinder for clamping components during the welding process Easy assembly thanks to swivel bearing on the bearing cap Integrated flow control Integrated end-position cushioning
More informationStainless steel cylinders
Stainless steel cylinders Corrosion-resistant in harsh ambient conditions Easy-to-clean design Wide choice of variants Comprehensive range of accessories 2017/12 Subject to change Internet: www.festo.com/catalogue/...
More informationStainless steel cylinders
Stainless steel cylinders Corrosion-resistant in harsh ambient conditions Easy-to-clean design Wide choice of variants Comprehensive range of accessories 2017/10 Subject to change Internet: www.festo.com/catalog/...
More informationThreaded fittings. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
More informationMini slides DGSL. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationPiston rod attachments
Piston rod attachments Co-ordinated with Festo s cylinder range Versatile combinations Sturdy and functional Stainless steel variants 2012/09 Subject to change Internet: www.festo.com/catalogue/... 1 Piston
More informationLinear drive units DGO
Features General information Double-acting Magnetically coupled without mechanical connections Piston chamber and slide are pressure tight Pressure tight and leak-free system Dirt and dust cannot enter
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationTwin cylinders DPZ/DPZJ
Key features High force with excellent protection against torsion 100 to 1,000 N thrust at 6 bar operating pressure Load capacity (F q ) from 8 to 105 N F q max. Permissible torque load (T L ) centrally
More informationMini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
More informationRound Cylinders DSNU, Double-acting Inch Series
Round Cylinders DSNU, Double-acting Inch Series Piston 5/16 to 2-1/2 Stroke lengths up to 20 Double-acting Meets the highest requirements for running characteristics, service life and load carrying ability
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More information-V- New. Linear drives DGC Features. 2 Internet:
Linear drives DGC Features At a glance Without external guide, for simple drive functions Compact fitting length relative to stroke Fully interchangeable with the linear drive DGP Easy assembly and installation
More informationGuide units EAGF, for electric cylinders
Guide units EAGF, for electric cylinders q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
More informationStandard cylinders DDPC, integrated displacement encoder
Cylinders with displacement encoder Product range overview Function Type Description Drives Rodless DDLI Without guide With contactless measuring displacement encoder Based on linear drive DGC-K Supply
More informationSuction cups VAS/VASB
s VAS/VASB q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
More informationPositioners CMSX. Festo core product range Covers 80% of your automation tasks
Positioners CMSX q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationHinge cylinders DFAW
Key features At a glance Hinge cylinder for clamping components during the welding process Sintered bronze bushes as lowfriction bearing material on rod clevis and swivel bearing Clamping unit: With piston
More informationParallel grippers HGPL-B, heavy-duty with long stroke
Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and
More informationTwin-piston semi-rotary drives DRRD
Twin-piston semi-rotary drives DRRD q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More information-H- Note. Angle grippers HGWC Key features. 2 Internet:
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationElectric cylinders ESBF, with spindle drive
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationStopper cylinders DFSP
Key features At a glance Versions: Trunnion Trunnion with female thread Roller Single-acting, pulling Double-acting with spring, pulling Double-acting without spring With or without protection against
More informationPassive guide axes DGC-FA, without drive
Key features At a glance Driveless linear guide units with guide and freely movable slide The passive guide axis is designed to support force and torque capacity in multi-axis applications Higher torsional
More informationSolenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationFlat Cylinders DZF - Inch Series Overview
Flat Cylinders DZF - Inch Series Overview Non-rotating oval piston Piston 1/2 to 2-1/2 Standard strokes up to 12, variable strokes up to 13 Double-acting Moment capacity up to 13.3 lbf-in Male or female
More informationCompact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationLinear drives DGC Key features
Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:
More informationLinear drives DGPL Selection aid
Linear drives DGPL Linear drives DGPL Selection aid General Compact, fitting length relative to stroke Highly adaptable thanks to wide choice of mounting and attachment options Adjustable end-position
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More information