MH SERIES METRIC HYDRAULIC CYLINDERS. Specials are Our Standard. ISO standard 6020/2-160 bar series For working pressures up to 210 bar
|
|
- Dorothy McGee
- 5 years ago
- Views:
Transcription
1 ISO 00 RISTRD Specials are Our Standard MH NPA MX MH NPA MX MH NPA MX2 ISO MX ISO MX ISO MX2 MH SRIS MH MH MH NPA ISO M M NPA ISO M M NPA ISO M2 MS2 MTRIC HDRAULIC CLINDRS MH NPA ISO MS2 MP MH2 NPA ISO MS MP MH NPA ISO MS MP MH NPA ISO MS2 MT MH2 NPA ISO MS MT2 MH NPA ISO MS MT ISO standard /2- bar series or working pressures up to 2 bar
2 Metric Piston Rod nd Styles Dimensional Data MTRIC Piston Rod nd Styles Rod B C *D NA Rod nd Styles A 2 A A 8 2 M X. M X. 8 M X. M8 X M X M X. M X. M X. M X. M X. 8 2 M X. M X. 8 M X. 8 M X. M X M X. M X. M2 X 2 M X. M X. M X. M X. M2 X M X. M X. 2 M2 X 2 M X. M2 X 2 M X 2 M X. M X 2 2 M2 X 2 M2 X M X 2 M X 2 M2 X 2 M2 X 2 M X 2 M X M X 2 M X 2 M8 X 2 M X 2 M X 2 M X 2 M X 2 M8 X M X 2 M X M8 X 2 M X 8 M X 2 M X 2 M8 X 2 M X M8 X 2 M8 X M X 8 M8 X 2 M X M X M8 X 2 M X 0 8 M X 8 M X ** M X M0 X M X M X 8 8 M X M X ** Distance across wrench flats. ** () Spanner holes / x /2 deep. Note: Other rod sizes available. Consult factory. NA NA A B B 2 A C C ROD ND STL COD NO. ( ) COD NO. 2 ( 2 ) ROD ND STL COD NO. ( ) 2
3 Index Page MTRIC Cylinder Piston Rod nd Inside Cover eneral Standard Specifications and eatures Performance Tested Design eatures Tie Rod Mount Solid nd Cap and Side Lug Mount 8 Mounting Specifications Pin Mount Trunnion Mount Double Rod nd Cylinders Additional Information ISO Cylinder Order Code
4 Standard Specifications and eatures STANDARD SPCIICATIONS Standard construction square head tie-rod design Nominal pressure 2 bar; see info box below Standard fluid-hydraulic oil Standard temperature - C to + C Standard bore sizes mm thru 0 mm Standard piston rod diameters mm thru mm Standard mounting styles standard styles and custom designs to suit your needs Strokes available in any practical stroke length Cushions available at either end or both ends of stroke Standard rod end styles and specials designed to order If your hydraulic operating pressure exceeds 2 bar, send your application data for engineering evaluation and design recommendations. MilCad Cylinder Configuator isit milwaukeecylinder.com to configure and download CAD files of your cylinders. STANDARD ATURS 2. Removable Retainer Plate The retainer plate and rod bushing are externally removable without disassembling the cylinder on most standard models. our capscrews securely hold and lock the retainer plate in place. 2. Rod Bushing and Seals A U-cup Rod Seal with a supporting bronze bushing is standard in Milwaukee Cylinder Series MH Cylinders.. Ports BSP/ cylinder ports are standard and can be located to customer requirements. ISO.0 ports optional.. Piston Rod The piston rod is of high strength steel, hardened and plated to resist scoring and corrosion, assuring maximum life.. Piston The piston is of fine grained alloy iron, incorporating u-cup seals, ensuring non-leak Hi-Lo pressure performance. The piston is pilot fitted and threaded to the rod.. Cylinder Barrel and Seals The barrel is of steel tubing, honed to a fine finish to assure superior sealing, minimum friction and maximum seal life.. nd Caps nd caps and mountings are of high quality steel, precision machined for accurate mounting. 8. Tie-Rods and Nuts The tie-rods are constructed from a high quality medium carbon steel. On most sizes the threads are rolled for rigid engagement of the self-locking nuts.. Cushions Cushions are machined to close tolerance to provide positive, smooth deceleration at the end of stroke. On all bore sizes, we provide the longest cushion possible based on the rod size and blind end caps. Longer cushions are available; for further information, consult factory.. Cushion Needle Adjustment and Ball Check The cushion needle adjustment valve and cushion-check ball retainer screw are specifically designed to provide full cushion adjustment. 8
5 Performance Tested Design eatures COMBINATION ROD SAL DSIN The Series MH cylinder design is a one-piece rod bushing with a double lip u-cup rod seal, a supporting bearing ring, and a double lip wiper. Simple Maintenance Simple maintenance is reality with a Milwaukee Cylinder. The rod bushing or rod seals can be inspected or serviced by merely removing the cap screws and retainer plate on most models. Standard available shop tools can be used to remove the rod bushing and seals without disturbing the torque on the tie-rods, assuring performance quality with maintenance ease. Cushion Piston Rod Cushions The cushion is of a high-grade alloy, precision machined and specially tapered to provide smooth deceleration of the piston at the end of stroke. A standard manufacturing process at Milwaukee Cylinder is to assemble the piston, cushion, and the piston rod; placing the assembly between centers and checking the critical diameters for concentricity. Piston Rod The piston rod is hardened, plated high strength steel, machined and processed to resist scoring and corrosion, assuring maximum life. Milwaukee Cylinder offers three rod end styles as standard. The style #2 rod end with two wrench flats is furnished as standard unless otherwise specified. Special rod ends and extra wrench flats are also available. They must be specified at the time of order, giving the dimensional requirements and the location of additional wrench flats. COMBINATION SALIN ROD The Series MH cylinder combines two bi-directional sealing u-cup seals and a fine grained alloy iron piston. This proven piston seal design is effective at both high and low pressures. The design gives the wear and shock absorbing qualities of cast iron and the near zero leakage of the u-cup seals.
6 Series MH, Tie-Rod Mount & mm Cylinders mm mm TI-ROD MOUNTS The flange and tie-rod mounts are basically the same, except that the cylinder tie-rods are extended and used to mount the cylinder. To prevent misalignment, sagging, or possible binding of the cylinder, when long strokes are required, the free end should be supported. The best use of tie-rods when extending on the blind end is in a thrust load application. hen using tie-rods extended on the rod end, the best application is a tension load. Tie rod mounts are suited for many applications, but it should be noted that they are not as rigid as the flange type of mounting. mm extra height applies to port face at the rod end caps only. TI RODS XTNDD BOTH NDS B nd Table ZT + STRO ZB + STRO P + STRO LB + STRO 2 MODL MH ISO STL MX AA DD BB BB TI RODS XTNDD ROD ND B nd Table ZB + STRO P + STRO LB + STRO 2 MODL MH ISO STL MX AA DD BB TI RODS XTNDD BLIND ND nd Table ZT + STRO ZB + STRO P + STRO LB + STRO AA (BOLT CIRCL) 2 DD MODL MH ISO STL MX2 BB
7 Dimensional Data Tie-Rod Mount TABL MH The dimensions given on this table are affected by the piston rod diameter and the stroke. 0 0 Rod Cylinder Code MH0 MH02 MH MH MH MH2 MH MH MH MH MH MH MH MH MH2 MH0 MH MH MH0 MH MH2 MH MH MH2 MH0 MH MH2 B LB P ZB ZT Available with fixed nonadjustable cushions on rod end and standard adjustable cushions on the blind end only. Cushions not available on rod end HO TO ORDR or ordering information refer to page. CAUTION NOTS: NOTS: or double rod end cylinders, add prefix letter D to cylinder code. xample: DMH0. (Refer to page.) Rod nd Styles and Dimensions or rod end styles and dimensions see the table in the inside cover of the brochure "MTRIC Cylinder Rod nd Styles". MilCad Cylinder Configuator The dimensions are constant regardless of rod TABL 2MH diameter or stroke. isit milwaukeecylinder.com to configure and download CAD files of your cylinders. 0 0 AA BB DD BSPP M X 0.8 M X M8 X M X. M X. M X. M X. M X. M2 X 2 M X ¼ ¼ ⅜ ½ ½ ¾ ¾ ¼
8 Series MH, Solid nd Cap & Side Lug Mounts & mm Cylinders* mm mm SOLID ND CAP MOUNT Milwaukee Cylinder's solid end cap mount is one of the strongest, most rigid methods of mounting. This type of rod end cap mounting is best in a tension application. A solid blind end cap mounting is best in a thrust application. * On mm and mm bore, MH mount cylinders with port in position 2 or, head height is increased by mm in position. mm extra height applies to port face at the rod end caps only. SOLID ROD ND CAP MOUNT lange rated for 2 bar operation. U nd Table L ZB + STRO P + STRO LB + STRO 2 R RD -0.2 MODL MH* ISO STL M T B HOLS SOLID BLIND ND CAP MOUNT lange rated for 2 bar operation. nd Table P + STRO LB + STRO U RD 2 R MODL MH ISO STL M X + STRO B HOLS T mm and mm port at Rod nd available in Position # only. SID OR LU MOUNT The side or lug mounted cylinder provides a fairly rigid mount. These types of cylinders can tolerate a slight amount of misalignment when the cylinder is at full stroke, but as the piston moves toward the blind end, the tolerance for misalignment decreases. It is important to note that if the cylinder is used properly (without misalignment), the mounting bolts are either in simple shear or tension without any compound stresses. nd Table ZB + STRO P + STRO LB + STRO MODL MH ISO STL MS2 ST 2 TS US h 2 h SB HOLS XS S SS + STRO Z SB iew at Z SS 8
9 Dimensional Data Solid nd Cap & Side Lug Mounts TABL MH 0 0 Rod Cylinder Code MH0 MH02 MH MH MH MH2 MH MH MH MH MH MH MH MH MH2 MH0 MH MH MH0 MH MH2 MH MH MH2 MH0 MH B The dimensions given on this table are affected by the piston rod diameter and the stroke. LB P RD SS L X XS ZB f8 min MH2 Available with fixed nonadjustable cushions on rod end and standard adjustable cushions on the blind end only. Cushions not available on rod end HO TO ORDR or ordering information refer to page. NOTS: or double rod end cylinders, add prefix letter D to cylinder code. xample: DMH0. (Refer to page.) Double rod ends are not available on clevis mount Series MH cylinders Rod nd Styles and Dimensions or rod end styles and dimensions see the table in the inside cover of the brochure "MTRIC Cylinder Rod nd Styles". MilCad Cylinder Configuator The dimensions are constant regardless of rod TABL 2MH diameter or stroke. isit milwaukeecylinder.com to configure and download CAD files of your cylinders. B R SB ST S TS T U US BSPP * ¼ * ¼ ⅜ ½ 0 ½ ¾ 0 ¾ 0 2 ¼ * See note on page
10 Series MH, Pin Cylinders & mm Cylinders mm mm PIN CLINDRS All pin cylinders need a provision on both ends for pivoting. These types of cylinders are designed to carry shear loads and pivot pins should be carried by bearings that are rigidly held and closely fit for the entire length of the pin. mm extra height applies to port face at the rod end caps only. CLIS MOUNT nd Table ZC + STRO P + STRO LB + STRO CD H Hole 8 Pin UB MR 2 MODL MH ISO STL MP XC + STRO LR L M Pivot Pin Included CB CLIS MOUNT nd Table ZC + STRO P + STRO LB + STRO CD H hole MR 2 MODL MH ISO STL MP XC + STRO LR L M IXD MOUNT nd Table ZH + STRO P + STRO LB + STRO H 2 CX 2 MODL MH2 ISO STL MP XH + STRO N X
11 Dimensional Data Pin Cylinders TABL MH 0 0 Rod Cylinder Code MH0 MH02 MH MH MH MH2 MH MH MH MH MH MH MH MH MH2 MH0 MH MH MH0 MH MH2 MH MH MH2 MH0 MH MH2 The dimensions given on this table are affected by the piston rod diameter and the stroke. B LB P XC XH ZC Available with fixed nonadjustable cushions on rod end and standard adjustable cushions on the blind end only. Cushions not available on rod end ZH HO TO ORDR or ordering information refer to page. NOTS: or double rod end cylinders, add prefix letter D to cylinder code. xample: DMH0. (Refer to page.) Double rod ends are not available on clevis mount Series MH cylinders. Rod nd Styles and Dimensions or rod end styles and dimensions see the table in the inside cover of the brochure "MTRIC Cylinder Rod nd Styles". MilCad Cylinder Configuator TABL 2MH The dimensions are constant regardless of rod diameter or stroke. isit milwaukeecylinder.com to configure and download CAD files of your cylinders. CB A CD CX X H2 L LR M BSPP h max. MR N UB max ¼ ¼ ⅜ ½ ½ ¾ ¾ ¼
12 Series MH, Trunnion Cylinders or Package and Mounting Dimension see Tables MH and 2MH. & mm Cylinders mm TRUNNION CLINDRS All trunnion cylinders need a provision on both ends for pivoting. These types of cylinders are designed to carry shear loads and the trunnion and pivot pins should be carried by bearings that are rigidly held and closely fit for the entire length of the pin. mm mm extra height applies to port face at the rod end caps only. See "CAUTION NOT on page. ROD ND TRUNNION MOUNT UT nd Table ZB + STRO P + STRO LB + STRO 2 TD MODL MH ISO STL MT Trunnion pins hard chrome plated TC TL X BLIND ND TRUNNION MOUNT UT nd Table ZB + STRO P + STRO LB + STRO 2 TD MODL MH2 ISO STL MT2 Trunnion pins hard chrome plated TC TL X + STRO CNTR TRUNNION MOUNT Trunnion pins hard chrome plated nd Table ZB + STRO P + STRO LB + STRO UH 2 TD MODL MH ISO STL MT TM UM BT TL XI* T * Customer to specify XI dimension.
13 Dimensional Data Trunnion Cylinders TABL MH 0 0 Rod * 0* * 0 * * Cylinder H0M Code MH0 MH02 MH MH MH MH2 MH MH MH MH MH MH MH MH MH2 MH0 MH MH MH0 MH MH2 MH MH MH2 MH0 MH MH2 B LB P X X ZB The dimensions given on this table are affected by the piston rod diameter and the stroke * Consult factory for these dimensions. Available with fixed nonadjustable cushions on rod end and standard adjustable cushions on the blind end only. Cushions not available on rod end. 0 * * * * 8 * * * * HO TO ORDR or ordering information refer to Page. CAUTION NOTS: * Rod end trunnion mount cylinders in mm bore (all rod sizes) and 0mm bore, ( and sizes) should not be used over 0 bar. If your application requires higher pressure, consult the factory. NOTS: or double rod end cylinders, add prefix letter D to cylinder code. xample: DMH0. (Refer to page.) Double rod ends are not available on clevis mount Series MH cylinders. Rod nd Styles and Dimensions or rod end styles and dimensions see the table in the inside cover of the brochure "MTRIC Cylinder Rod nd Styles". MilCad Cylinder Configuator TABL 2MH The dimensions are constant regardless of rod diameter or stroke. isit milwaukeecylinder.com to configure and download CAD files of your cylinders. BT BSPP TD f8 TC h TL TM h T UH UM UT ¼ ¼ ⅜ ½ ½ ¾ ¾ ¼
14 Series MH, Double Rod nd Cylinders & mm Cylinders mm mm mm extra height applies to port face at the rod end caps only. DOUBL ROD ND CLINDRS Double rod end styles are available in every mounting style except clevis. On double rod end cylinders where the rod ends are not the same, be sure to specify clearly which rod end is to go at which end of the cylinder in relation to your mounting requirements. To obtain dimensional information on a double rod end cylinder, first select the desired mounting style and refer to the corresponding single rod end cylinder model shown on the preceding pages. After you have determined all necessary dimensions from the previous page covering the desired mounting, turn back to this page. Supplement those dimensions with additional ones from the drawing below and the table at the right. These added dimensions differ from, or are in addition to, those shown on the preceding pages and provide the additional information needed to completely dimension a double rod end cylinder model. On a double rod end cylinder where two different rod ends are required, or two different rod sizes are required, or cushions on one end are required, be sure to state clearly which rod is to go at which end of the cylinder. hen two types of mounting styles are required, be sure to specify their relationship to the piston rods, if they are not the same. nd Table ZM + 2X STRO ZL + STRO P + STRO LD + STRO 2 ISO STL MDX TABL 2MH The dimensions are constant regardless of rod diameter or stroke. 0 0 BSPP ¼ ¼ ⅜ ½ ½ ¾ ¾ ¼ 0 0 Cylinder H0M Code DMH0 DMH02 DMH DMH DMH DMH2 DMH DMH DMH DMH DMH DMH DMH DMH DMH2 DMH0 DMH DMH DMH0 DMH DMH2 DMH DMH DMH2 DMH0 DMH DMH2 DOUBL ROD ND CLINDRS Rod B LD P ZL ZM
15 Series MH, Ordering Information CONIUR OUR CLINDR (Series MH Metric Cylinder Nomenclature) MH x 2 8 Double Rod nd Cylinder Code (Refer to Table MH) Mounting Style Rod nd Style Note: Use "S" if any special design features are required, describe in detail on your order. xample: Cushions Cylinder Modifications If standard leave blank The code for a MP mount metric hydraulic cylinder with an mm bore, mm rod, Style No. 2 rod end, cushion both ends, standard seals with a mm stroke is MH2--2- x Seal Stroke eature Description Page No. Code No. 2 Double Rod nd D Cylinder Code Refer to Table MH,,, Mounting Style Model Number Only, 8,, Rod nd Style Code Number Inside front cover Cushions None Rod nd Blind nd Both nds 2 Cylinder Modifications Special S 8 Seal Polyurethane (- to 0 ) Stroke Specify in millimeters limete MILAU CLINDR also offers: POR UNITS ear (00 psi) or ane (00 psi) Pump designs ertical, IC, Low Height or L-shaped reservoirs available Available in a wide range of standard and custom configurations INDUSTRIAL MANIPULATORS PO'R ARM (up to 00 lb. capacity) and PO'R RACH (up to lb. capacity) Safe, convenient load positioning Single operator dual speed control Integrated Hydraulic Controls ALS D0 and D0 spool type directional valves in multiple flow paths orking pressure up to 00 psi (2 bar) Temperature range C to C HDRAULIC, LO PRSSUR, PNUMATIC AND ALUMINUM CLINDRS Series H", LH", A", MN" NPA standard tie rod design Single and Double rod end design Custom configurations also available SSTM SOLUTIONS Milwaukee Cylinder wants to solve your problem! e provide many complete solutions to both our OM customers and end users. In addition to custom cylinders we often provide plumbing, fittings, valves, mounting hardware, and other accessories to allow a quicker and easier solution. Ask us to help!
16 ISO 00 RISTRD S Pennsylvania Avenue Cudahy, isconsin -2 USA MILAU CLINDR offers: SPCIALS / CUSTOM PRODUCTS HDRAULIC CLINDRS LO PRSSUR HDRAULIC CLINDRS Specials PNUMATIC CLINDRS ALUMINUM CLINDRS are HDRAULIC PNUMATIC DICS - PRSSUR BOOSTRS - AIR OIL TANS Our - ACCUMULATORS CLINDR ACCSSORIS - LINAR ALINMNT TOOLS Standard - AMLO ROD CLAMP - SPHRICAL ROD ACCSSORIS INDUSTRIAL MANIPULATORS POR UNITS AND ALS Contact Milwaukee Cylinder for your application needs. our Milwaukee Cylinder Distributor sales@milwaukeecylinder.com phone..00 fax..0 Due to manufacturing processes and product improvements, please check website for the latest updates of products _MC02 Milwaukee Cylinder
Series MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72
Series MH MH MH2 MH ISO MX ISO MX ISO MX2 MH MH MH ISO M ISO M ISO M2 MH MH2 MH ISO MP ISO MP ISO MP MH MH2 MH ISO MT ISO MT2 ISO MT Double Rod nd NPA MDX Milwaukee Cylinder Series MH ISO Metric Hydraulic
More informationMC105R2 ISO 9001 REGISTERED
MC0R ISO 900 RISTRD Table Piston Rod nd Styles (Series H, LH and A) See page 0 for Series MN ROD A B -.00 -.00 C CC *D NA AD A +.00 -.00 AF diameter AC / / / / /- / /-0 /-0 9/ / / / / / / / - / /- /- /
More informationengineered solutions for hydraulic and pneumatic applications
MC0R Series MH ISO Metric Hydraulic Cylinders 0 Series LH Low Pressure Hydraulic Cylinders 0 Series A Pneumatic Cylinders Casting, rolling, or pickling... whatever the demanding application Milwaukee Cylinder
More informationSeries LH. Milwaukee Cylinder Series LH Low Pressure Hydraulic Cylinders are built to perform on the toughest applications.
Series LH LH0 LH LH LH NPA MX NPA MX0 NPA MX NPA MX LH LH LH LH NPA M NPA M NPA M NPA M LH LH LH LH NPA MS NPA MS NPA MS NPA MS LH NPA MP LH LH LH LH/LH NPA MP NPA MT MT NPA MT NPA MT M Double Rod nd NPA
More informationSeries H. Milwaukee Cylinder Series H Hydraulic Cylinders. are. built to perform on the toughest applications. Series H is a complete line
Series H H0 H NPA MX H NPA MX H H NPA M H H H H NPA MT Double Rod nd NPA M H/ H NPA MT H NPA M NPA MS H NPA MT H H NPA MS NPA MP NPA M NPA MS H H NPA M NPA MS NPA MX NPA M H H NPA MX ey Mount NPA MDX Milwaukee
More informationAS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
More informationHydraulic Cylinder NFPA Industrial Type
Hydraulic Cylinder NFPA Industrial Type RA 7038/08.3 Replaces: 0.3 /44 Model CDT/CGT Series X Nominal pressure: Up to,500 psi maximum Table of contents Features Contents Page Duty, up to,500 psi (see chart
More informationSeries VH Hydraulic Cylinders
Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
More informationHYDRAULIC HEAVY DUTY
Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,
More informationSERIES PSI 5000 PSI NON SHOCK HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL CYLINDERS, INC
CYLINDERS, INC SERIES 3000 3000 PSI 5000 PSI NON SHOCK PURAKAL 1234 345 4567 6789 8901 0123 23 PURAKAL 1234567 HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC P.O. Box 22038 1017 S.Danebo Ave. Eugene, OR 97402-0414
More informationPURAKAL SERIES 100 TABLE OF CONTENTS
TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................
More informationSERIES MH (NFPA) CYLINDER
MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationMetric Hydraulic Cylinders Series HMI
Series HMI Conforms to ISO 600/ (99) or working pressures up to 0 bar Vital Technologies for Motion and Control or Cylinder Division Plant Locations See Page II. 05 As the world leader in the design and
More informationMiller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011
Medium Duty Hydraulic Cylinders Catalog M0- September, 0 Up to 000 PSI ore Sizes " through " Mounting Styles AV Series Cylinders Up to 0 PSI Permanently Lubricated AL Series Aluminum Cylinders Up to 0
More information2A Pneumatic Cylinders
A Pneumatic Cylinders Steel-bodied tie rod cylinders for working pressures up to bar Mounting Styles A Cylinder Mounting Styles The standard range of Parker A cylinders comprises mounting styles, to suit
More informationSERIES HH (NFPA) CYLINDER
HH SERIES TAB 5 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES HH (NFPA) CYLINDER HH Rod Lock Reduces cylinder drag and erratic
More informationPL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX
PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting
More informationParker Series 2A Air Cylinder
Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.
More informationPH-3 Series 10" - 20" Bore Heavy-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX
PH- Series 0" - 0" ore Heavy-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features...06 Specifications and Mountings...0 Design Features...0-09 Mounting Information...0- Double Rod Models...
More informationNFPA Double acting imperial cylinders
> > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,
More informationHH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company
HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner
More information2A Tie Rod Cylinders NFPA Pneumatic Cylinders for working pressures up to 18 bar. Catalogue HY /UK October 2006
A NFPA Pneumatic Cylinders for working pressures up to bar Catalogue HY0-090/UK October 00 Catalogue HY0-090/UK Mounting Styles A Cylinder Mounting Styles The standard range of Parker A cylinders comprises
More informationHEAVY DUTY PNEUMATIC CYLINDERS
HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless
More informationISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
More informationFULL COLOR TAB #1 TA 7
FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder
More informationSeries AM/MM/WM Mill Type Cylinders
ET AH To order this part, call Lifco Hydraulics USA Toll Free at -00-- S S ZE* SS* SW (TYP) FB THRU, () PLACES TE UF WA / EE P* ØE EE P* CD 00 M CW S Series AM/MM/WM Mill Type Cylinders Table of Contents
More informationLP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51
Non-Lube Air Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...52 Ordering Information...53 Specifications...54 Basic Dimensions...55 Mounting Options...56 Spring Data...57 Rod Options...58
More informationHydraulic cylinders type CH - big bore sizes to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)
www.atos.com Table B60-6/ Hydraulic cylinders type CH - big bore sizes to ISO 600- - nominal pressure 6 MPa (60 bar) - max 5 MPa (50 bar) SWC Cylinders Designer Software for assisted selection of Atos
More informationMEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI
AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed
More informationMedium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable
N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder
More informationSeries 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
More informationMA SERIES. Medium-Duty Pneumatic Cylinders Pressure Rating 200 PSI
MA SIS Medium-Duty Pneumatic Cylinders Pressure ating 200 PSI Construction DIMNSIONALL INTCHANGABL TO MT ANSI SPCIFICATIONS 1,2 Head & Cap High strength aluminum alloy is used for both head and cap. They
More informationNEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
More informationA SERIES. Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI
A SERIES Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI 1, 2, 6, 43 Heads, Caps, Retainers, Mountings The heads, retainers, and mountings, are machined from steel. The trunnion head, flanges and
More informationSUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250
SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250 ALUMINUM HEADS & CAPS LARGE PORTS PISTON PACKING PISTON WIPER BRONZE BEARING PACKING TUBE SEAL CYLINDER TUBE
More informationAir Cylinders Type : ISO-6431 & VDMA-24562
Air Cylinders Type : ISO-6 & VDMA-262 Conform to ISO: 6 & VDMA: 262 standards. Double acting, with adj. cushioning at both ends. sizes : Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0 & Ø0 Profiled aluminum tube with hard
More informationJIT Cylinders A Series Catalog
JIT Cylinders A Series Catalog Table of Contents Introduction to Excellence Introduction Page 1 Model Code 2 Cylinder Cross Section 3 Feature, Advantages, Benefits 4 Application Data 5 Cylinder Options
More informationIndustrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)
Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -
More informationHH SERIES. Heavy-Duty Hydraulic Cylinders Pressure Rating 3,000 PSI
HH SRIS Heavy-Duty Hydraulic Cylinders Pressure Rating 3,000 PSI Construction 3 Piston Rod Piston rods through 4" diameter have a minimum expected yield of 00,000 psi. They are case hardened to 50 Rockwell
More informationSERIES PSI LINEAR POSITIONING CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC 5000 PSI NON SHOCK
CYLINDERS, INC SERIES 3050 3000 PSI 5000 PSI NON SHOCK LINEAR POSITIONING CYLINDER PURAKAL CYLINDERS, INC P.O. Box 22038 1017 S. Danebo Ave. Eugene, OR 97402-0414 Phone (541) 345-4199 FAX (541) 345-6522
More informationHeavy Duty 3500/5000. psi rating. series. hydraulic cylinders. bulletin 0207XH
3500/5000 psi rating Heavy Duty series XH hydraulic cylinders bulletin 0207XH www.royalcylinders.com 1 Contents Page Description 1 Contents 2 Features Description Mounting Dimensions 3 C Clevis Mount 3
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationSeries AHM Metric Hydraulic Cylinder
Series AHM Metric Hydraulic Cylinder As a major supplier of pneumatic and hydraulic cylinders, Atlas Cylinders introduces the Series AHM metric hydraulic cylinder. Atlas Series AHM cylinders are designed
More informationSERIES TA (NFPA) CYLINDER
Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00, improving bearing surface alignment. SERIES (NFPA) CYLINDER Reduces cylinder drag and erractic operation Reduces cylinder
More informationDimensional Data Clevis / Brackets / Pins / rod Eyes
Dimensional Data levis / Brackets / Pins / rod yes W B W +.00 +.00 rod LVIS R KK THRD Load (tension) (lbs) Size Part # ode KK B R W R Part # ode 15-7-1001 101,80 7/16-0 / 11/ / 1/ 11/ 1/ 1/ 5/8 15-7-1001
More informationMedium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
More informationHYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI
HEAVY DUTY HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to + 220F, large cross section lip type wiper designed to protect the bearing
More informationCylinders HD1 Cylinders
Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and
More informationSeries MH Hydraulic Cylinders
Series MH Hydraulic Cylinders Atlas Cylinders Tri-Lip Seal Designed To Eliminate Rod Seal Leakage Atlas Cylinders Series MH Heavy Duty Mill Hydraulic Cylinders with the Tri-Lip seal offers positive protection
More informationA SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications
A SRIS Double-Acting Pneumatic Valve Actuator Designed & engineered for severe-service applications Service and support www.cowandynamics.com A SRIS Design & Materials Barrel Seals Nitrile O -ring standard.
More informationHigh Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
More informationTaskMaster Pneumatic Cylinder
TaskMaster Pneumatic Cylinder Index TaskMaster Cylinders Index Air to 200 psi, 1-1/2" thru 6" Bore Page 1-1/2" thru 4" Bore Features & Specifications 2 (profile version) How to Order 3-5 Mounting Styles
More information7" & 8" Bore High Pressure zhc03 Hydraulic Cylinders Series 3H
7" & " ore High Pressure zhc0 Hydraulic ylinders Series H Heavy Duty Service Industrial Tie-od onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For ylinder Division Plant Locations
More informationV160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C
V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of
More information250 psi rating. series. pneumatic cylinders. bulletin 0606ST.
20 psi rating series ST pneumatic cylinders bulletin 0606ST www.royalcylinders.com i Contents Page Description 1 Mounting Styles 2 Features Description Mounting dimensions 3 STNM No Mount (MX0) 3 STME
More informationCylinders, Boosters, Accumulators & Accessories
Cylinders, Boosters, Accumulators & Accessories #MC1501Cyl Effective January 1, 2015 Supercedes price list dated June 15, 2014 5877 S. Pennsylvania Ave Cudahy, WI 53110 Phone: 414-769-9700 sales@milwaukeecylinder.com
More informationSERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC
CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414
More informationHydraulic cylinders type CN - round heads with counterflanges to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)
www.atos.com Table B80-/E Hydraulic cylinders type CN - round heads with counterflanges to ISO 600- - nominal pressure 6 MPa (60 bar) - max MPa (0 bar) SWC Cylinders Designer Software for assisted selection
More informationCATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES
HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC
More informationClass 3. High Pressure Square-Head Cylinders CLASS 3
Class High Pressure Square-Head Cylinders CLSS Options, Modifications and Ordering Information Options Bore Size Selection Unlike air applications, the output force of a cylinder for hydraulic service
More informationTABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D
HEAVY-DUTY CATALOG FL-6-A FLAIRLINE FAST Shipped in - days THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING
More informationSeries MH Heavy Duty Mill Hydraulic Cylinder
Heavy Duty Mill Hydraulic Cylinder Catalog HY0--/NA May, 00 n Meets All NFPA Mounting Dimensions n Heavy Duty Service Mill Type Construction n Nominal Pressure 000 PSI n Standard Bore Sizes -/" through
More informationAL4 Series Air Cylinder
L Series ir ylinder atalog M097- February, 00 Up to 0 PSI Bore Sizes -/" through 8" NFP Interchangeable 7 Standard Mounting Styles Series ylinders Up to 0 PSI Permanently lubricated BT & BTM Series ylinders
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationMedium Duty Hydraulic Cylinders. Series 3L
Medium Duty Hydraulic Cylinders Series L Catalog HY08-0-6/NA Series L In line with our policy of continuing product improvement, specifications and information contained in this catalog are subject to
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationCylinders Small Bore Tie Rod
Cylinders Small Bore Tie Rod Reference Control Valves Cylinders Specialty Valves Production Devices Index Cylinder Materials Heads: Tubes: Piston: Rod: Bearing: Piston and Rod Seals: Rod Wiper: Tie Rods:
More informationAIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE
AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE NFPA Industrial Type Cylinders TaskMaster Pneumatic Cylinders (to 200 psi) 1 1/2" - 4" Bores 5" & 6" Bores Profile Design External Tie Rods PowerMaster
More informationFULL COLOR TAB #6 TC 105
FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationPneumatic Cylinders NFPA Series
Pneumatic Cylinders NFPA Series INDEX: General characteristics 3 Mounting styles 5 Piston rod characteristics (bore diam 25/150) 6 Single rod cylinder dimensions (bore diam 25/150) 8 Piston rod characteristics
More informationLinear Alignment Coupler. Flange Couplers and Weld Plates. Spherical Rod Accessories. Milwaukee Cylinder provides various cylinder accessories to
ylinder ccessories Page Linear lignment oupler MLOK Rod lamp Flange ouplers and Weld Plates Spherical Rod ccessories 19 150-151 15 15 Milwaukee ylinder provides various cylinder accessories to maximize
More informationCYLINDERS OPTIONS ACCESSORIES
CYLINDERS NFPA Interchangeable 1.50 thru 1 Bores 50 PSI Pneumatic Strokes to 10 Inches Permanent Lubrication Temperatures: 00 F Standard Double Acting Multi-Stage Multi-Position Triple Rod Flush Mount
More informationOptimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
More informationHMI/HMD Hydraulic Cylinders
HMI/HMD Hydraulic Cylinders Metric tie rod cylinders for working pressures up to 0 bar Introduction Introduction The HMI and HMD ranges described in this catalogue are Compact Series cylinders to ISO 600/
More informationSeries ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
More information3MA/4MA Series Non-Lube NFPA Air Cylinders
MA/MA Series Non-Lube NFPA C S MNR MAJ/MAJ ACV MA/MA Contents MA Series -/" to 5" ore... 5-0 MA Series -/" to 5" ore... -5 How to Select a MA or MA Cylinder...6 MA asic Dimensions -/" to 5" ore... 7-8
More informationLESA Series TT Linear Electrohydraulic Servo Actuators
Vickers ylinders LS Series TT Linear lectrohydraulic Servo ctuators Designed specifically for wood products processing applications 5094.00/N/0797/ Introduction LS Series TT Linear lectrohydraulic Servo
More informationFA SERIES KNIFE GATE PNEUMATIC CYLINDERS... 8
FA SERIES KNIFE GATE PNEUMATIC CYLINDERS......... 8 section 8 154 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Dimensional Information FA SERIES DIMENSIONS BASIC DIMENSIONS PLUS
More informationThe Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS!
SERIES JHD HEAVY DUTY AIR CYLINDER The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS! The true test of a cylinder is how well it performs in your application.
More informationHydraulic cylinders type CC - round heads with counterflanges to ISO nominal pressure 25 MPa (250 bar) - max 32 MPa (320 bar)
www.atos.com Table B-/E Hydraulic cylinders type CC - round heads with counterflanges to ISO 60 - nominal pressure MPa (0 bar) - max MPa (0 bar) SWC Cylinders Designer Software for assisted selection of
More informationFeatures. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard)
Features Symbol Standard tie rod type hydraulic cylinder Double acting hydraulic cylinder for 70 kgf/cm 2 or 140kgf/cm 2 with bore sizes from 40 to 250. High performance cushion to reduce shock Double
More informationSeries LAA Industrial Interchangeable Pneumatic Cylinders. Catalog LAA-1 05/00
Series L Industrial Interchangeable Pneumatic ylinders atalog L- 0/00 Model Numbers Lin-ct Series L Series L Model Numbers How to Develop Them How to Decode Them Lin-ct Series L cylinders can be completely
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationCylinders. HD1 Cylinders. Customize Your Cylinder. Viton Seals (VI) Cushions (CR, CF, CB) Low Breakaway Option (NL) Magnetic Piston (MP)
HD Cylinders Cylinders Customize Your Cylinder The HD Series offers numerous accessories and design options. With hundreds of possible combinations available, you can design your own cylinder for any application.
More information12/95 N Our policy is one of continued research and development. We therefore reserve the right
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure
More informationRP SERIES 200 psi Mill-type Cylinder
Actuation Solutions and Systems for the SERIES 200 psi Mill-type Cylinder Delivering superior long-term performance and value Designed and engineered for severe-service applications Bore Size: 2 to 20
More informationTAS SERIES TAB
TAS SERIES TAB 101 HH - Heavy Duty Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES TAS (NFPA) CYLINDER Duty s Reduces cylinder
More informationThe Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
More informationZBD 2512 Differential Cylinder Data sheet 07.16/DS13660
ZBD 2512 Differential Cylinder Data sheet 07./DS Description: The STORZ hydraulic cylinder series ZBD 2512 for the nominal pressure of 250 bar is replaceable with the CDH1 series. By fixing the mounting
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationCylinders. Series TV Cylinders ISO and DIN Interchangeable Nominal Pressure: 160 bar Hydraulic Working Pressure: Up to 210 bar Hydraulic
Vickers Cylinders Series TV Cylinders ISO 0-2 and DIN 4 Interchangeable Nominal Pressure: bar Hydraulic Working Pressure: Up to 2 bar Hydraulic Revised / 447 Vickers, Incorporated All Rights Reserved Features
More informationAccessories Air/OilTanks Switches Clevis&Brackets AirBoosters AlignmentCouplers. Sensors
Air/OilTanks Clevis&Brackets AirBoosters AlignmentCouplers Sensors On time,consistentdelivery.everycustomer sorderisimportant.ourbusinesismanaged solargeordersdonotdisruptourpublisheddeliveryschedules.
More informationACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,
F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationAir/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TECHNICAL DATA: FORCE CHART BORE STROKE
How to determine the right size Cylinder for the job TECHNICAL DATA To determine what size cylinder the task requires, you need to answer a few questions about three main points: load, velocity and air
More information