Spare parts list. Petrol Breakers CP Rail.

Transcription

1 Petrol Breakers CP Rail Valid from serial number BES Valid to serial number BES

2 CP Road Spare parts list General information This spare parts list applies to the following: Part number Description CP Rail 32X CP Rail 32X CP Rail 28X CP Rail 28X CP Rail 25X CP Rail 25X108 Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions!

3 Contents Service, repair and wear part kits Service kit 1 Seal kit 3 Carburettor repair kit 5 Mechanical Body 7 Motor 13 Percussion unit 19 Fuel tank 25 Handle assembly 27 Tightening torque 29 Options / accessories Working tools 25 x 108 mm 31 Working tools 25X108 mm US (Flat to flat) 33 Working tools 28 x 160 mm 35 Working tools 32 x 160 mm 37 Working Tools 28 X Working Tools 32 X Accessories 45 Dimensions, mm (in.) 47

4 Service, repair and wear part kits Service kit Fri Aug 21 01:57:54 MDT

5 Item Part No. Name Qty L One month service kit Spark plug Air filter Three months service kit One month service kit Scraper ring, complete Gasket Six months service kit Three months service kit O-ring O-ring O-ring Filter Piston ring, complete Gasket Gasket Plastic bushing Plastic bushing Gasket Gasket Twelve months service kit Six months service kit Bearing and seal, complete Piston ring Gasket Air filter kit Air filter Air filter 10 Fri Aug 21 01:57:56 MDT

6 Service, repair and wear part kits Seal kit Fri Aug 21 01:58:08 MDT

7 Item Part No. Name Qty L Complete seal kit 1 A Gasket Gasket Gasket Gasket 1 A Seal Seal Gasket, crankcase Gasket, transmission Seal, 32 mm, 1-1/4 in Seal, 28 mm, 1-1/8 in Seal, 25 mm, 1 in Scraper ring, complete Speed seal 15 - O-ring 16 - Lock ring 17 - Scraper ring 18 - Support ring O-ring O-ring O-ring Piston ring, complete 2 B 23 - Piston ring 24 - O-ring Gasket O-ring Gasket 1 Comments for Page: Seal kit A Includes all seals for an overhaul. B There are two "Piston ring, complete" on the machine. Fri Aug 21 01:58:09 MDT

8 Service, repair and wear part kits Carburettor repair kit Fri Aug 21 01:58:09 MDT

9 Item Part No. Name Qty L Carburettor repair kit Washer M8 ISO Washer M8 ISO Diaphragm Diaphragm 1 Fri Aug 21 01:58:09 MDT

10 Mechanical Body Fri Aug 21 01:58:20 MDT

11 Item Part No. Name Qty L Back cover, complete Back cover Label, Warning Flange nut Label, sound level Oil mix label Label, Oil level Label Flange nut Label "Decompression valve" Spark plug key Service cover, complete Filter cover, complete Filter cover Filter cover knob Label "Start instruction" Warning Label Label, Warning (32 x 160 mm, 1 1/4 x 6 1/4 in.) Label, Warning (32 x 152 mm, 1 1/4 x 6 in.) Label, Warning (28 x 160mm, 1 1/8 x 6 1/4 in.) Label, Warning (28 x 152 mm, 1 1/8 x 6 in.) Label, Warning (25 x 108 mm, 1 x 4 1/4 in.) Filter housing, complete Prime pump, complete Prime pump Pipe 1 A Pipe 1 B Nut, M Plate Filter housing Choke handle Choke arm Gasket Air filter Starter, complete Starter cover, complete Starter cover 1 Fri Aug 21 01:58:20 MDT

12 This page intentionally left blank Fri Aug 21 01:58:20 MDT

13 Item Part No. Name Qty L Locking ring Bushing Rope guide Pulley wheel, complete Pulley wheel Starting spring Fiber washer Washer Locking spring Rope Fan cover Handle Screw, M6SF 6 x 20 mm Fan cover, complete Screw, M6SF 6 x 20 mm Fan cover Bushing Fan, complete Fan Hub Cup spring Washer Nut Silencer, complete Silencer Screw, M6SF 6 x 45 mm Spring Screw, M6S 6 x 12 mm Gasket Silencer insert Gasket Hinge Hinge pin, FRP Ø5 x 100 mm, Ø0.20 x 3.94 in Heat shield Front cover, complete Decomp label EPA Label 1 Fri Aug 21 01:58:20 MDT

14 This page intentionally left blank Fri Aug 21 01:58:20 MDT

15 Item Part No. Name Qty L CP Logo Front cover Road logo 2 Comments for Page: Body A Tank connection (E), see section "Motor" for placement., L = 340 mm, L = 13.4 in. B Carburettor connection (C), see section "Motor" for placement., L = 375 mm, L = 14.8 in. Fri Aug 21 01:58:23 MDT

16 Mechanical Motor Fri Aug 21 01:58:39 MDT

17 Item Part No. Name Qty L Motor cylinder, complete Cylinder Piston Piston ring Piston pin Lock ring Gasket De-compression valve Screw, M5 x 20 mm Neddle bearing Spark plug 1 A Motor crankshaft Bearing and seal, complete Ball bearing Seal Neddle bearing Ball bearing Needle bushing Seal Woodruff key Lock ring Lock ring Gasket, crankcase 1 B Gasket, transmission 1 C Transmission shaft Transmission cog wheel Nut 1 D Transmission cover, complete Needle bushing Seal Transmission cover Stud, M6 x 18 mm, L = 28 mm Oil level plug, R1/4 in Flange nut Flange nut Crankcase, complete Crankcase 1 E Fri Aug 21 01:58:39 MDT

18 This page intentionally left blank Fri Aug 21 01:58:39 MDT

19 Item Part No. Name Qty L 38 - Crankcase 1 F Stud, M6 x 70 mm, L = 85 mm Stud, M6 x 20 mm, L = 32 mm Stud, M6 x 25 mm, L = 40 mm Stud, M6 x 50 mm, L = 65 mm Stud, M6 x 30 mm, L = 45 mm Stud, M6 x 35 mm, L = 50 mm Crankcase valve, complete Screw, M5 x 20 mm Crankcase valve, Including reed (No. 63) Flat washer Stud 2 H Pipe, L = 36 mm, L= 1.4 in Electronic unit, complete(cobra TTe) Protective washer Screw Spark plug cap Electronic unit, complete Electronic unit Ignition cable Grommet Spark plug cable, complete Spark plug cap Ignition cable Grommet Reed Hex. head screw Hex head screw Carburettor 1 G Flywheel, complete Woodruff key Flywheel Carrier Screw Carrier spring Support washer Nut 1 Fri Aug 21 01:58:39 MDT

20 This page intentionally left blank Fri Aug 21 01:58:39 MDT

21 Item Part No. Name Qty L Plain washer Bushing Plastic bushing Stud, M6 x 18 mm, L = 28 mm Cylinder Piston Hex. Head screw 2 Comments for Page: Motor (L)OCAL REMARKS A Champion RCJ8 B Crankcase C Transmission cover D KML - 6 left E Fan side F Transmission side G In U.S: Only to be replaced and adjusted by authorized Atlas Copco service centers, due to EPA regulations. H Use LOCTITE 243 on the thread towards the reed valve.loctite is a registered trademark of Henkel Corporation. 243 is a trademark of Henkel Corporation. Fri Aug 21 01:58:43 MDT

22 Mechanical Percussion unit Fri Aug 21 01:58:53 MDT

23 Item Part No. Name Qty L Breaker housing, complete Breaker housing Tool latch, complete Compress pring Washer Link arm Tool latch Tool latch insert Spring pin Plain washer Screw 25 Nm Breaker housing, complete Breaker housing for 25 x 108 mm Tool latch, complete Compress pring Washer Link arm Tool latch Tool latch insert Spring pin Plain washer Screw 25 Nm Tool chuck, complete Tool chuck, 28 x 152 mm, 11/8 x 6 in Seal, 28 mm, 1-1/8 in Tool chuck, complete Tool chuck, 28 x 160 mm, 11/8 x 61/4 in Seal, 28 mm, 1-1/8 in Tool chuck, complete Tool chuck, 32 x 152 mm, 11/4 x 6 in Seal, 32 mm, 1-1/4 in Tool chuck, complete Tool chuck, 32 x 160 mm, 11/4 x 61/4 in Seal, 32 mm, 1-1/4 in Tool chuck, complete Tool chuck, 25 x 108 mm Seal, 25 mm, 1 in. 1 Fri Aug 21 01:58:53 MDT

24 This page intentionally left blank Fri Aug 21 01:58:53 MDT

25 Item Part No. Name Qty L Feed stop Recoil spring Piston guide, complete Scraper ring, complete Speed seal O-ring Lock ring Scraper ring Support ring Piston guide O-ring O-ring O-ring Hammer piston, complete Hammer piston Piston ring, complete Piston ring O-ring Hammer cylinder, complete Gasket Hammer cylinder Oil plug, complete Oil plug O-ring Gasket Stud, M6 x 18 mm, L = 28 mm Drive piston, complete Piston ring, complete Piston ring O-ring Drive piston Piston pin Lock rail Connection rod, complete Connection rod Needle bushing Shim 1 Fri Aug 21 01:58:53 MDT

26 This page intentionally left blank Fri Aug 21 01:58:53 MDT

27 Item Part No. Name Qty L Lock rail 1 Fri Aug 21 01:58:54 MDT

28 Mechanical Fuel tank Fri Aug 21 01:58:55 MDT

29 Item Part No. Name Qty L Fuel tank complete Tank Tank grommet, complete Tank cap Seal Hose clip 1 Fri Aug 21 01:58:59 MDT

30 Mechanical Handle assembly Fri Aug 21 01:59:02 MDT

31 Item Part No. Name Qty L Handle Assembly Handle frame bracket Handle frame Bearing Parallel pin Lock washer Spring End rubber Handle, complete Handle Stud Washer, 12.2x20x0.5 mm Handle knob Pin Throttle control Nipple Stop switch Nut Handle, complete Handle Stud Washer, 12.2x20x0.5 mm Handle knob Nut 1 Fri Aug 21 01:59:03 MDT

32 Mechanical Tightening torque Fri Aug 21 01:59:04 MDT

33 Item Part No. Name Qty L Not Shown - Flywheel - 35 Nm - Not Shown - Fan with aluminium hub - 15 Nm - Not Shown - M6 screws for silencer and fan cover - 8 Nm - Not Shown - M6 nuts + other M6 screws - 10 Nm - Not Shown - M8 screws for engine/hammer cylinder - 23 Nm - Not Shown - M8 screws for breaker housing - 25 Nm - A Not Shown - M5 screws for engine cylinder - 10 Nm - Not Shown - M5 screw for crankcase valve - 8 Nm - Not Shown - M5 nuts for filter housing - 4 Nm - Not Shown - M4 screws for electronic unit Nm - Not Shown - Special screws ( ) for carrier - 2 Nm - Not Shown - Oil plug for gear box - 2 Nm - B Not Shown - De-compression valve - 20 Nm - Not Shown - Spark plug - 20 Nm - Not Shown - Filter cover knob - >2 Nm - Not Shown - M6 studs on crankcase halves Nm - C Not Shown - M8 x 1 nuts for handle assembly - 10 Nm - Fri Aug 21 01:59:07 MDT

34 Options / accessories Working tools 25 x 108 mm Fri Aug 21 01:59:21 MDT

35 Item Part No. Name Qty L Moil point 1 A Narrow chisel 1 B Wide chisel 1 C Asphalt cutter 1 D Digging chisel 1 E Digging spade 1 F Clay spade 1 G Frost wedge 1 H Tie tamper 1 I Shaft for tamping pad 1 J Tamping pad (round), W=175 mm 1 K Tamping pad(square), W=175 mm 1 L Posthole pad, W= 40 mm 1 M Driver pad, W=100 mm 1 N Comments for Page: Working tools 25 x 108 mm (L)OCAL REMARKS A W= -, L=380 mm, Lt=500 mm B W= -, L=380 mm, Lt=50 mm C W= 75 mm,l=380 mm, Lt=500 mm D W= 125 mm, L=380 mm, Lt=500 mm E W= 125 mm, L=430 mm, Lt=550 mm F W= 75 mm, L=380 mm, Lt=500 G W= 120 mm, L=380 mm, Lt=500 mm H W= 35 mm, L=380 mm, Lt=500 mm I W= 100 mm, L=380 mm, Lt=500 mm J W= -, L=280 mm, Lt=400 mm K W=100 mm, L=-, Lt=- L W= 40 mm, L=-, Lt=- M W= 175 mm, L=-, Lt=- N W=175 mm, L=-, Lt=- Fri Aug 21 01:59:25 MDT

36 Options / accessories Working tools 25X108 mm US (Flat to flat) Fri Aug 21 01:59:29 MDT

37 Item Part No. Name Qty L Moil point Moil point Moil point Narrow chisel Narrow chisel Narrow chisel Wide chisel Asphalt cutter Clay spade Digging spade Digging chisel Wedge chisel Tie tamper Shaft Driver pad, W=100 mm Posthole pad, W= 40 mm Tamping pad (round), W=175 mm Tamping pad(square), W=175 mm 1 Fri Aug 21 01:59:34 MDT

38 Options / accessories Working tools 28 x 160 mm Fri Aug 21 01:59:38 MDT

39 Item Part No. Name Qty L Moil point 1 A Moil point 1 B Moil point 1 C Narrow chisel 1 D Narrow chisel 1 E Narrow chisel 1 F Wide chisel 1 G Asphalt cutter 1 H Digging chisel 1 I Digging spade 1 J Clay spade 1 K Wedge chisel 1 L Tie tamper 1 M Shaft for tamping pad 1 N Tamping pad, round 1 O Tamping pad, square 1 P Tamping pad, square 1 Q Driver blank 1 R Driver pad 1 S Fri Aug 21 01:59:41 MDT

40 Options / accessories Working tools 32 x 160 mm Fri Aug 21 01:59:42 MDT

41 Item Part No. Name Qty L Moil point 1 A Moil point 1 B Moil point 1 C Narrow chisel 1 D Narrow chisel 1 E Narrow chisel 1 F Wide chisel 1 G Asphalt cutter 1 H Digging chisel 1 I Digging spade 1 J Clay spade 1 K Wedge chisel 1 L Tie tamper 1 M Tie tamper 1 N Spiking tool 1 O Shaft for tamping pad 1 P Tamping pad, round 1 Q Tamping pad, square 1 R Tamping pad, square 1 S Driver blank 1 T Driver pad 1 U Comments for Page: Working tools 32 x 160 mm (L)OCAL REMARKS A W= - L=380 mm, Lt=545 mm, Wt=3,5 kg B W= - L=450 mm, Lt=615 mm, Wt=4,0 kg C W= - L=1000 mm, Lt=1165 mm, Wt=7,6 kg D W= - L=380 mm, Lt=545 mm, Wt=3,5kg E W= - L=450 mm, Lt=615 mm, Wt=4,0 kg F W= - L=1000 mm, Lt=1165 mm, Wt=7,6 kg G W= 75 L=380 mm, Lt=545 mm, Wt=3,7 kg H W= 115 L=300 mm, Lt=465 mm, Wt=3,8 kg I W= 75 L=380 mm, Lt=545 mm, Wt=4,4 kg J W= 125 L=380 mm, Lt=545 mm, Wt=5,1 kg K W= 140 L=380 mm, Lt=545 mm, Wt=5,4 kg L W= 40 L=400 mm, Lt=565 mm, Wt=4,1 kg M W= 100 L=400 mm, Lt=565 mm, Wt=4,9 kg Fri Aug 21 01:59:42 MDT

42 N W= 100 L=580 mm, Lt=745 mm, Wt=6,2 kg O W= - L= 195 mm, Lt= 360 mm, Wt=4,6 kg P W= - L= 235 mm, Lt= 400 mm, Wt=3,2 kg Q W=180 L= - mm, Lt= - mm, Wt=7,2 kg R W= 150 L= - mm, Lt= - mm, Wt=8,3 kg S W= 200 L= - mm, Lt= - mm, Wt= 8,5 kg T W= 80 L= - mm, Lt= - mm, Wt= 3,5 kg U W= 120 L= - mm, Lt= - mm, Wt= - kg Fri Aug 21 01:59:42 MDT

43 This page intentionally left blank Fri Aug 21 01:59:43 MDT

44 Options / accessories Working Tools 28 X 152 Fri Aug 21 01:59:43 MDT

45 Item Part No. Name Qty L Moil point Moil point Moil point Narrow chisel Narrow chisel Narrow chisel Wide chisel Wide chisel Asphalt cutter Asphalt cutter Digging chisel Digging spade Clay spade Tie tamper Shaft for tamping pad Driver blank Driver pad Tamping pad, round Tamping pad, square Tamping pad, square 1 Fri Aug 21 01:59:43 MDT

46 Options / accessories Working Tools 32 X 152 Fri Aug 21 01:59:44 MDT

47 Item Part No. Name Qty L Moil point Moil point Moil point Narrow chisel Narrow chisel Wide chisel Asphalt cutter Asphalt cutter Digging spade Clay spade Tie tamper Tie tamper Shaft for tamping pad Driver blank Driver pad Tamping pad, round Tamping pad, square Tamping pad, square 1 Fri Aug 21 01:59:45 MDT

48 Options / accessories Accessories Fri Aug 21 01:59:45 MDT

49 Item Part No. Name Qty L Trolley Carrying harness Petrol can 5.0 litres, 1.1 gal Not approved in US according to EPA regaulations Template, 28 x 152 mm, 11/8 x 6 in Template gauge, 28 x 160 mm, 11/8 x 61/4 in Template, 32 x 152 mm, 11/4 x 6 in Template gauge, 32 x 160 mm, 11/4 x 61/4 in Template gauge, 25 x 108 mm Mixolene Oil 1 L 12 Fri Aug 21 01:59:50 MDT

50 Options / accessories Dimensions, mm (in.) Fri Aug 21 01:59:53 MDT

51

52 No Copyright Construction Tools PC AB