CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
|
|
|
- Tamsin Cross
- 5 years ago
- Views:
Transcription
1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 16/12/
2 COPYRIGHT PUBLICATION SL NO CASE NUMBERS RENEWED ON The Patent Office Journal 16/12/
3 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Number, Date and Country are also shown. Design Number Class )Bose Corporation The Mountain Framingham, Massachusetts , United States of America Date of Registration 28/10/2010 Remote Control 29/361, /05/2010 U.S.A. Design Number Class )Multi-Holding AG Stockbrunnenrain Allschwil Switzerland Date of Registration 10/03/2011 Connector /09/2010 OHIM Design Number Class )SMC Kabushiki Kaisha Akihabara UDX 15F, , Sotokanda, Chiyoda-ku, Tokyo , Japan Date of Registration 15/02/2011 Fluid Pressure Cylinder With Plate The Patent Office Journal 16/12/
4 Design Number Class )Reckitt Benckiser Llc., Morris Corporate Centre IV, 399 Interpace Parkway, Parsippany, New Jersey 07054, USA Date of Registration 17/02/2011 Dispenser /08/2010 OHIM Design Number Class )Fujitsu General Limited 1116, Suenaga, Takatsu-Ku, Kawasaki-Shi, Kanagawa, , Japan Date of Registration 03/05/2011 Air Conditioner /11/2010 Japan Design Number Class )Koninklijke Philips Electronics N.V. Eindhoven, Groenewoudseweg 1, 5621 BA Eindhoven, The Netherlands. Date of Registration 01/06/2006 Iron With Steam Generator /12/2005 OHIM The Patent Office Journal 16/12/
5 Design Number Class )Vasco Petruzzi Via Salvatore Quasimodo 85, Italy. Date of Registration 10/07/2006 Computer Casings RM 2006O /01/2006 Italy Design Number Class )Panasonic Corporation 1006, Oaza Kadoma, Kadoma Shi, Osaka , Japan Date of Registration 30/03/2011 Steam Iron Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 31/03/2011 Exhaust Fan The Patent Office Journal 16/12/
6 Design Number Class )ITT Manufacturing Enterprises, Inc., 1105 N. Market Street, Suite 1217, Wilmington, Delaware 19801, United States of America Date of Registration 16/03/2011 Pump And Controller Device For Bottled Water System 29/375, /09/2010 U.S.A. Design Number Class )M/s. S. N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj) India Date of Registration 12/07/2011 Carpet Design Number Class )Toray Industries, Inc., 1-1, Nihonbashi Muromachi 2-chome, Chuo-ku, Tokyo , Japan Date of Registration 04/02/2011 Switching Valve For Water Purifier /08/2010 Japan The Patent Office Journal 16/12/
7 Design Number Class )Ajanta Manufacturing Limited 8A National Highway, Same Kanthe, Morbi Dist. Rajkot, Gujarat, India. Date of Registration 10/02/2011 Bulb Holder Design Number Class )Ajanta Manufacturing Limited 8A National Highway, Ajanta Corporate House, 8A National Highway, Same Kanthe, Morbi , Dist. Rajkot, Gujarat, India Date of Registration 10/02/2011 Socket Design Number Class )Add Corporation Limited Business Park, 6th Floor, Chincholi Naka, S.V. Road, Malad (West), Mumbai , Maharashtra., Date of Registration 27/05/2011 Writing Instrument The Patent Office Journal 16/12/
8 Design Number Class )Westfalia Separator AG Werner-Habig-Strasse 1, 59302, Oelde, Germany. Date of Registration 21/04/2006 Decanter /10/2005 OHIM Design Number Class )Isringhausen GmbH & Co. KG., Isringhausen-Ring 58, Lemgo, Germany Date of Registration 21/02/2011 Truck Seat /12/2010 OHIM Design Number Class )Ophardt Hygiene-Technik Gmbh & Co.Kg Lindenau 27, Issum, Germany. Date of Registration 26/10/2006 Toilet Paper Dispenser /04/2006 OHIM The Patent Office Journal 16/12/
9 Design Number Class )Panasonic Electric Works Co., Ltd., 1048, Oaza Kadoma, Kadoma-shi, Osaka , Japan Date of Registration 21/02/2011 Portable Led Lighting Apparatus Design Number Class )Bagla Cosmetics (P) Ltd., B-112, G. T. Karnal Road, Industrial Area, Delhi India Date of Registration 09/05/2011 Sindur Box Design Number Class )The Gillette Company IP/Legal Patent Department-3E, One Gillette Park, Boston, 02127, United States of America Date of Registration 27/04/2011 Shaving Cartridge 29/377, /10/2010 U.S.A. The Patent Office Journal 16/12/
10 Design Number Class )Anchor Sanitaryware Pvt. Ltd., Ternetar Road, Thangadh , Gujarat, India Date of Registration 29/03/2011 Commode With Flush Tank Design Number Class )The Supreme Industries Limited 601 Central Plaza, 2/6 Sarat Bose Road, Kolkata , West bengal, India. Date of Registration 13/06/2011 Design Number Class Chir 1)Rajesh Kumar Gupta Hosue no. 2591, Urban Estate, Dugri Phase-I, Ludhiana , Punjab Date of Registration 11/01/2011 Sealing Collar For Floor Trap The Patent Office Journal 16/12/
11 Design Number Class )M/s. S. N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj) India Date of Registration 12/07/2011 Carpet Design Number Class )Rcj Auto Forge Pvt Ltd., E , Phase-VII, Focal Point, Ludhiana (Punjab) India Date of Registration 18/07/2011 Auto Load Carrier Design Number Class )The Gillette Company IP/Legal Patent Department-3E, One Gillette Park, Boston, 02127, United States of America Date of Registration 18/05/2011 Protective Overcap For A Shaving Razor Cartridge 29/383, /01/2011 U.S.A. The Patent Office Journal 16/12/
12 Design Number Class )HANSGROHE AG., Auestr. 5-9, D Schiltach, Germany Date of Registration 18/05/2011 Grip/Handle For A Sanitary Fitting /11/2010 OHIM Design Number Class )Add Corporation Limited Business Park, 6th Floor, Chincholi Naka, S.V. Road, Malad (West), Mumbai , Maharashtra., India Date of Registration 27/05/2011 Writing Instrument Design Number Class )Hansgrohe Ag Auestr. 5-9, D Schiltach, Germany. Date of Registration 12/04/2006 Wall Bar-cum-holder /10/2005 OHIM The Patent Office Journal 16/12/
13 Design Number Class )Nitto Denko Corporation 1-2, Shimohozum 1-chome, Ibaraki-shi, Osaka , Japan Date of Registration 23/02/2011 Winding Core /08/2010 Japan Design Number Class )Hazet-Werk Hermann Zervar GmbH &Co. KG Guldenwerther Bahnhofstrasse 25-29, D Remscheid Date of Registration 24/02/2011 Tool Box /08/2010 OHIM Design Number Class )Cona Industries 20/21, Niraj Industrial Estate, Off : Mahakali Caves Road Andheri East, Mumbai Maharashtra India Date of Registration 10/06/2011 Angular Bulb Holder The Patent Office Journal 16/12/
14 Design Number Class )Parmigiani Fleurier SA., 11, Rue Du Temple, 2114 Fleurier, Switzerland Date of Registration 04/03/2011 Watch Case NÂ DM/ /09/2010 WIPO Design Number Class )SMC Kabushiki Kaisha Akihabara UDX 15F, , Sotokanda, Chiyoda-ku, Tokyo , Japan Date of Registration 15/02/2011 Fluid Pressure Cylinder With Plate Design Number Class )Reckitt Benckiser Llc., Morris Corporate Centre IV, 399 Interpace Parkway, Parsippany, New Jersey 07054, USA Date of Registration 17/02/2011 Dispenser /08/2010 OHIM The Patent Office Journal 16/12/
15 Design Number Class )De Core Science & Technologies Limited SDF, J-14, NSEZ, Noida-Dadri Road, Phase-II Noida , U.P. Date of Registration 06/05/2011 Street Lighting Fixture Design Number Class )Lta Corporation C/o Goelet Llc 425 Park Avenue New York, Ny United States Of America Date of Registration 19/01/2011 Airship 29/366, /07/2010 U.S.A. Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 28/03/2011 Lighting Fixture The Patent Office Journal 16/12/
16 Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 31/03/2011 Lighting Reflectors Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 31/03/2011 Lighting Fixture Design Number Class )The Supreme Industries Limited 601 Central Plaza, 2/6 Sarat Bose Road, Kolkata , West Bengal, India Date of Registration 20/06/2011 Chair The Patent Office Journal 16/12/
17 Design Number Class )Samsonite Ip Holdings S.a.r.l., 20, Avenue Monterey, L-2163 Luxembourg., Date of Registration 20/06/2011 Luggage /12/2010 OHIM Design Number Class )Honda Motor Co., Ltd., 1-1, Minami-Aoyama 2-chome, Minato-ku, Tokyo, Japan Date of Registration 01/04/2011 Motor Scooter /10/2010 Japan Design Number Class )M/s. S. N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj) India Date of Registration 12/07/2011 Carpet The Patent Office Journal 16/12/
18 Design Number Class )Research In Motion Limited Canadian Corporation of, 295 Phillip Street, Waterloo, Ontario N2L 3W8, Canada Date of Registration 18/07/2011 Handheld Electronic Device 29/ /01/2011 U.S.A. Design Number Class )Reckitt Benckiser South Africa (Pty) Limited 8 Jet Park Road, Elandsfontein 1406, South Africa. Date of Registration 21/06/2006 Bottle / /12/2006 OHIM Design Number Class )Glaxo Group Limited Glaxo Wellcome House, Berkeley Avenue, Greenford, Middlesex, UB6 0NN, United Kingdom. Date of Registration 14/08/2008 Mouthpiece for Inhaler The Patent Office Journal 16/12/
19 Design Number Class )Toray Industries, Inc., 1-1, Minamiaoyama 2-Chome, Minato-ku, Tokyo, Japan Date of Registration 04/02/2011 Switching Valve For Water Purifier /08/2010 Japan Design Number Class )Klio-Eterna Schreibgerate GmbH & CO KG Glashuttenweg 7, Wolfach, Germany Date of Registration 09/02/2011 Writing Pen /08/2010 WIPO Design Number Class )Koninklijke Philips Electronics N.V. Eindhoven, Groenewoudseweg 1, 5621 Ba Eindhoven, The Netherlands. Date of Registration 10/01/2006 Television /07/2005 OHIM The Patent Office Journal 16/12/
20 Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 28/03/2011 Ceiling Fan Design Number Class )M/s. S. N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj) India Date of Registration 12/07/2011 Carpet Design Number Class )M/s. S. N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj) India Date of Registration 12/07/2011 Carpet The Patent Office Journal 16/12/
21 Design Number Class )Nokia Corporation Keilalahdentie 4, Espoo, FIN-02150, Finland Date of Registration 19/05/2011 Handset 29/ /03/2011 U.S.A. Design Number Class )Poddar Tyres Limited G. T. Road, Jugiana, Ludhuiana (Punjab) (India) Date of Registration 23/05/2011 Tyre For Bicycle Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 22/02/2011 Housing For Electronic Ballast The Patent Office Journal 16/12/
22 Design Number Class )3m Innovative Properties Company., 3M Center, Saint Paul, Minnesota , USA., Date of Registration 24/02/2011 Head Gear 29/368, /08/2010 U.S.A. Design Number Class )Shree Harikrupa Die Casting K-1, 242/17, B/H. Mel-Tech, Nr. Turbo Bearing, Aji Vasat GIDC, Pin , Rajkot, GUJRAT, India Date of Registration 07/06/2011 Cabinet Handle Design Number Class )Gandhi Automations Pvt. Ltd., 2nd Floor, Chawda Commercial Centre, Link Road, Malad (West), Mumbai , Maharashtra, India Date of Registration 22/06/2011 Shutter (Shop) The Patent Office Journal 16/12/
23 Design Number Class )Maxcel Plast 133, Shree Ram Industrial Estate, B/h. C.M.C. Anup Eng. Compound, Nr. Sonil"s Chawl Cross Roads, Odhav, Ahmedabad , Gujarat-India Date of Registration 08/08/2011 Ceiling Junction Box. Design Number Class )M/s. Midpoint Engineers (P) Limited 143-C, Light Industrial Area, BHILAI (C.G.) Date of Registration 18/02/2011 Tractor Operated Hydraulic Community Bin Design Number Class )Otkrytoe akcionernoe obschestvo <<OKB SUHOGO>> russia, , g. Moscow, ul. Polikarpova, 23 a, Russian. Date of Registration 28/01/2011 Aircraft /07/2010 Russia The Patent Office Journal 16/12/
24 Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 28/03/2011 Ceiling Fan Design Number Class )Manoj Bohra R-14/15, Jaishri Dhan Society, Bangur Nagar, Goregaon (W), Mumbai , India. Date of Registration 07/07/2011 Bottle Design Number Class )Anchor Sanitaryware Pvt. Ltd., Ternetar Road, Thangadh , Gujarat, India Date of Registration 29/03/2011 Commode With Flush Tank The Patent Office Journal 16/12/
25 Design Number Class )BEHR A/s Magevej 14 A, 8370 Hadsten, Denmark Date of Registration 10/01/2011 Doors For Refrigerated Sales Counters /07/2010 OHIM Design Number Class )Safe Dot International Khasra No. 995, Rithala Industrial Area, Delhi , (India) Date of Registration 11/07/2011 Helmet Design Number Class )M/s. S. N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj) India Date of Registration 12/07/2011 Carpet The Patent Office Journal 16/12/
26 Design Number Class )Rohm GmbH Heinrich-Rohm-Strabe 50 I, Sontheim/Brenz, D-89567, Germany Date of Registration 02/02/2011 Chucks /09/2010 OHIM Design Number Class )Em Cee Cee Sports Agencies (P) Ltd., Jonex House, Sodal Road, Jalandhar (Punjab) (India) Date of Registration 18/05/2011 Wheel For Roller Skate Design Number Class )Poddar Tyres Limited G. T. Road, Jugiana, Ludhuiana (Punjab) (India) Date of Registration 23/05/2011 Tyre For Bicycle The Patent Office Journal 16/12/
27 Design Number Class )Hansgrohe Ag Auestr. 5-9, D Schiltach, Germany. Date of Registration 12/04/2006 Bathroom Stand /10/2005 OHIM Design Number Class )Dr. Shivani Chowdhury Salian (P.T.), Indian National, 36/428 Sahakar Nagar-1, Chembur, Mumbai , Maharashtra, India Date of Registration 21/02/2011 Pelvic Inclinometer Design Number Class )Panasonic Electric Works Co., Ltd., 1048, Oaza Kadoma, Kadoma-shi, Osaka , Japan Date of Registration 28/02/2011 Hair Dryer /08/2010 Japan The Patent Office Journal 16/12/
28 Design Number Class )Poddar Tyres Limited G. T. Road, Jugiana, Ludhuiana (Punjab) (India) Date of Registration 30/05/2011 Tyre For Bicycle Design Number Class )Indo Alusys Industries Limited 606, Tolstoy House, 15, Tolstoy Marg, New Delhi Date of Registration 06/06/2011 Frame Divider Design Number Class )United Spirits Limited UB Tower 24 Vittal Mallya Road Bangalore India Date of Registration 03/06/2011 Bottle The Patent Office Journal 16/12/
29 Design Number Class )Societe Pour La Conception Des Applications Des Techniques Electroniques-Satelec 17, Avenue Gustave Eiffel-Zi Du Phare, F-33700, Merignac, France. Date of Registration 05/09/2006 Equipment for Dental Use /03/2006 OHIM Design Number Class )3m Innovative Properties Company., 3M Center, Saint Paul, Minnesota , USA., Date of Registration 10/03/2011 Eyewear 29/369, /09/2010 U.S.A. Design Number Class )Ophardt Hygiene-Technik Gmbh & Co. KG Lindenau 27, Issum, Germany. Date of Registration 26/10/2006 Toilet Paper Dispenser /04/2006 OHIM The Patent Office Journal 16/12/
30 Design Number Class )Reckitt Benckiser Llc., Morris Corporate Centre IV, 399 Interpace Parkway, Parsippany, New Jersey 07054, USA Date of Registration 17/02/2011 Dispenser /08/2010 OHIM Design Number Class )Iwatsu Electric Co. Ltd. 7-41, 1-Chome Kugayama, Suginami-ku Tokyo Japan Date of Registration 02/05/2011 Printer /11/2010 Japan Design Number Class )Anchor Sanitaryware Pvt. Ltd., Ternetar Road, Thangadh , Gujarat, India Date of Registration 29/03/2011 Commode With Flush Tank The Patent Office Journal 16/12/
31 Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 31/03/2011 Task Light Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 31/03/2011 Exhaust Fan Design Number Class )Gemco A-71, Bhatti Street, Moradabad, Uttar Pradesh , India Date of Registration 16/08/2010 Electrical Lamp The Patent Office Journal 16/12/
32 Design Number Class )M/s. S. N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj) India Date of Registration 12/07/2011 Carpet Design Number Class )Pallegar, Bhavani Shankar No 25/2, Prakruthi, Road Oppsite Masjid, C B Halli., AMS Extension, Vidyaranyapura, Bangalore , Indian Date of Registration 10/02/2011 Chair Design Number Class )Luminous Power Technologies Pvt. Ltd., C-8 & C-9, Community Centre, Janakpuri Delhi , (INDIA) Date of Registration 24/05/2011 Mobile Charger The Patent Office Journal 16/12/
33 Design Number Class )Macwell Fabrication B/h Fildmarshal Vadi, Jal Ganga Agro Street, Near Idea Tower, Shapar (Veraval), dist: Rajkot, Gujarat-India Date of Registration 26/05/2011 Ginning Machine Design Number Class )Hansgrohe Ag Auestr.5-9, D-77761, Schiltach, Germany. Date of Registration 12/04/2006 Hook for Bathroom /10/2005 OHIM Design Number Class )Dr. Shivani Chowdhury Salian (P.T.), Indian National, 36/428 Sahakar Nagar-1, Chembur, Mumbai , Maharashtra, India Date of Registration 21/02/2011 Pelvic Floor Exerciser The Patent Office Journal 16/12/
34 Design Number Class )SHI, Jie #, Hui Jie Plaza, NO. 268 Zhongshan Road, Nanjing City, Jiangsu Provice, , P.R. China Date of Registration 02/03/2011 Led Bulb /09/2010 China Design Number Class )Poddar Tyres Limited G. T. Road, Jugiana, Ludhuiana (Punjab) (India) Date of Registration 30/05/2011 Tyre For Bicycle Design Number Class )Sanjay Dhawan J-391, New Rajinder Nagar, New Delhi , India Date of Registration 10/06/2011 Door Handle The Patent Office Journal 16/12/
35 Design Number Class )Gandhi Automations Pvt. Ltd., 2nd Floor, Chawda Commercial Centre, Link Road, Malad (West), Mumbai , Maharashtra, India Date of Registration 22/06/2011 Shutter (Shop) Design Number Class )Dreamwell, Ltd., 2215-B, Renaissance Drivem, Suite 12, Las Vegas, NV (US) Date of Registration 28/01/2011 Mattress Border 29/366, /07/2010 U.S.A. Design Number Class )Kosha Creation Laxmi Jewellery, 1st Floor, Green Chowk, Wankaner, Dist: Rajkot. Gujarat-India Date of Registration 12/04/2010 Ring With Stand Set The Patent Office Journal 16/12/
36 Design Number Class )Yoon, Jae Dong , Sanunmaeul Apt., Unjung-dong, Bundang-gu Seongnam-si, Gyeonggi-do, Republic of Korea. Date of Registration 14/03/2011 Cover Housing For An Illumination Lamp /09/2010 Republic of Korea Design Number Class )Bonjour International 15 UA Jawahar Nagar, Delhi , India., Date of Registration 11/07/2011 Air Tight Container Design Number Class )M/s. S. N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj) India Date of Registration 12/07/2011 Carpet The Patent Office Journal 16/12/
37 Design Number Class )Poddar Tyres Limited G. T. Road, Jugiana, Ludhuiana (Punjab) (India) Date of Registration 23/05/2011 Tyre For Bicycle Design Number Class )Dr. Shivani Chowdhury Salian (P.T.), Indian National, 36/428 Sahakar Nagar-1, Chembur, Mumbai , Maharashtra, India Date of Registration 21/02/2011 Perineometer Design Number Class )Maxwel Exporters B-5, Sports Complex, Delhi Road, Meerut (U.P.), India Date of Registration 31/05/2011 Goal Post The Patent Office Journal 16/12/
38 Design Number Class )United Spirits Limited UB Tower, 24 Vittal Mallya Road, Bangalore , India. Date of Registration 03/06/2011 Bottle Design Number Class )Sanjay Dhawan J-391, New Rajinder Nagar, New Delhi , India Date of Registration 10/06/2011 Door Handle Design Number Class )M/s Sbs Biotedh (Unit-II) #1430/4, Rampura, Near ram Bagh, Ambala City, HARYANA, India Date of Registration 08/06/2011 Bottle The Patent Office Journal 16/12/
39 Design Number Class )Warmup Plc 702 Tudor Estate, Abbey Road, London NW10 7UW, United Kingdom Date of Registration 03/03/2011 Electronic Controller /09/2010 OHIM Design Number Class )V2 Corp WZ-8/1, Industrial Area, Kirti Nagar, Mew Delhi India Date of Registration 14/02/2011 Jars(Packaging) Design Number Class )SMC Kabushiki Kaisha Akihabara UDX 15F, , Sotokanda, Chiyoda-ku, Tokyo , Japan Date of Registration 15/02/2011 Fluid Pressure Cylinder With Plate The Patent Office Journal 16/12/
40 Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 28/03/2011 Lighting Fixture Design Number Class )Andslite Pvt. Ltd., 103, F.I.E., Patparganj, Delhi , (India) Date of Registration 13/06/2011 Emergency Light Design Number Class )The Supreme Industries Limited 601 Central Plaza, 2/6 Sarat Bose Road, Kolkata , West Bengal, India Date of Registration 20/06/2011 Chair The Patent Office Journal 16/12/
41 Design Number Class )Honda Motor Co., Ltd., 1-1, Minami-Aoyama 2-chome, Minato-ku, Tokyo, Japan Date of Registration 01/04/2011 Turn Signal Lamp Case For Motor Scooter /10/2010 Japan Design Number Class )M/s. S. N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj) India Date of Registration 12/07/2011 Carpet Design Number Class )3m Innovative Properties Company., 3M Center, Saint Paul, Minnesota , USA., Date of Registration 24/02/2011 Head Gear 29/368, /08/2010 U.S.A. The Patent Office Journal 16/12/
42 Design Number Class )Bayerische Motoren Werke Aktiengesellschaft Petuelring 130, 80809, Munich, Germany Date of Registration 30/05/2011 Motor Vehicle DE /12/2010 Germany Design Number Class )Bajaj Auto Limited New No. 6, Old No. 157, II Floor, Habibullah Road, T. Nagar, Chennai , State of Tamil Nadu, India Date of Registration 10/06/2011 Wheel For Motorcycle Design Number Class )Vignal Systems 12 rue Eugene Henaff, Venissieux, France, Date of Registration 11/04/2011 Lighting System For Vehicle /02/2011 OHIM The Patent Office Journal 16/12/
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART-1
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)
DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
One machine multiple applications.
One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
TRANSPORT - RENUKOOT Printed Jan. 2018
TRANSPORT - RENUKOOT Printed Jan. 2018 HINDALCO Hindalco Catalogue Contents Page No. A. Hindalco - An Overview B. Specifications... 06... 08 1. Bus Windows... 12 2. Bus Structurals... 19 3. Moulding...
DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS
Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines
Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines Centre flange mounted slide bearing type EM 9S The RENK EM 9S bearing is a fully self-contained, centre
Slide Bearings Type E For Shaft Diameter Range mm Main Application Field Electric Machines
Slide Bearings Type E For Shaft Diameter Range 160-315 mm Main Application Field Electric Machines End flange mounted slide bearing type EFWF with water-cooling and lubrication by a fixed oil ring RENK
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Parts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number
c Parts Manual Model Serial Number Bale Clamp 40D-BCB-A R0 corporation To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Kare Zindagi Instant Start
Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings
Maximum retail price list For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Effective from 1 st April, 2017 Engineered for optimized
Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016)
Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016) S.No. Tractor company / model 1.0 New Holland Tractors, Gautam Budh Nagar, Uttar Pradesh 1.1 Tractor
Parts Manual. cascade
c Parts Manual Model Serial Number 65F Sideshifter 65F-SSS-B796 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com I NSPECTION & MAINTENANCE WARNING:
Parts Manual. cascade
c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A009 R3 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write:
Parts Manual. cascade. corporation. Sideshifter. Model 100E-SSS-B203 R0. Serial Number
c Parts Manual Model Serial Number Sideshifter 100E-SSS-B203 R0 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write:
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Slide Bearings Type HG
Innovative Power Transmission Slide Bearings Type HG Slide Bearings Type HG Type HG Slide Bearings Slide Bearings Type HG Locating bearings for horizontal hydro turbines operate under high axial loads,
Slide Bearings For Industrial, Marine And Offshore Installations
Slide Bearings For Industrial, Marine And Offshore Installations The advantages of working with RENK Hannover are many; here are a few of particular interest: RENK can boast a depth of experience in bearings
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Parts Manual. cascade
c Parts Manual Model Serial Number D-RR-24A 892 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Rotator Group 4 2 7 8 RR02.ill $ # @! 9 0 REF QTY
Innovative Power Transmission. Slide Bearings Type E. Series EG Journal Range mm
Innovative Power Transmission Slide Bearings Type E Series EG Journal Range 475-1250 mm RENK Slide Bearings Type E ➀ Type E ➁ Housing G smooth, foot-mounted ➂ Heat dissipation N Z X 5) W 5) U T natural
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
You ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
31/32 Spring Diaphragm Rotary Actuators
GE Oil & Gas Technical Specifications 08/2012 Masoneilan * Valves 31/32 Diaphragm Rotary Actuators The 31/32 Series actuator is designed to provide high performance, reliability and long service life.
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Parts Manual. cascade
c Parts Manual Model F-Series Sideshifter Serial Number -SSS-A087R5 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write:
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Parts Manual. cascade
c Parts Manual Model Serial Number Fork Positioner 100D-FPB-04C R1 cascade corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Base Unit Group 1 2 3
CONTINUED FROM PART-1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Parts Manual. cascade
c Parts Manual Model Sideshifter Serial Number 60E-SSS-359 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet:
Parts Manual. cascade
c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A147R0 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234
CONTINUED FROM PART- 2 INTRODUCTION. Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office.
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Parts Manual. cascade
c Parts Manual Model Serial Number 20D-CC-0Q 67596 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation,
HORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India
CHAPTER 20 MOTOR VEHICLES
CHAPTER 20 MOTOR VEHICLES 20.1 In India the first car ran on roads in 1897. Prior to independence in the 1940s India had no automobile industry to speak of. Cars were brought into the country in a knocked
ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
Setting a New Standard in Emission Testing MOTOR EXHAUST GAS ANALYZER TEST SYSTEM CONCEPT MEXA-ONE offers an intuitive user interface with a highly efficient hardware and software design. This results in
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Parts Manual. cascade. corporation. Fork Positioner. Model 55F-FPS-231. Serial Number
c Parts Manual Model Serial Number Fork Positioner -FPS-231 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade
OUTDOOR OFF LOAD DISCONNECTORS HCB/HDB Range
OUTDOOR OFF LOAD DISCONNECTORS HCB/HDB Range SWITCHGEAR COMPLEX SWITCHGEAR COMPLEX Crompton Greaves Ltd. the name to reckon in Electrical Industry, brings a product with its leading edge technology to
4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
H2R and H2L Cable Reel
c Installation Service and Parts Manual H2R and H2L Cable Reel Serial Numbers 678971 through 678972 Part Number 679932-R1 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
Parts Manual. cascade. Single-Double Pallet Handler. Model 50D-ES-012. Serial Number
c Parts Manual Model Single-Double Pallet Handler Serial Number 50D-ES-02 To Order Parts call: 888-227-22, Fax: 888-29-024 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Safety Decals