CONTINUED FROM PART- 1 INTRODUCTION

Size: px
Start display at page:

Download "CONTINUED FROM PART- 1 INTRODUCTION"

Transcription

1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched

2 DESIGN CORRIGENDUM The Registered Design No which has been erroneously published in the official Journal of India dated 06/01/2012, part II, at page 9919, column 1 in the name of The Gillette Company IP/Legal Patent Department-3E, One Gillette Park, Boston, 02127, United State of America, Class 09-05, Date of Registration 10/10/2011, Titled as Safety Razors, Priority Number 29/389,472, Date 12/04/2011, Country U.S.A. should read as The Gillette Company IP/Legal Patent Department-3E, One Gillette Park, Boston, 02127, United State of America, Class 09-05, Date of Registration 10/10/2011, Titled as Packaging For Safety Razors, Priority Number 29/389,472, Date 12/04/2011, Country U.S.A

3 COPYRIGHT PUBLICATION SL NO CASE S RENEWED ON

4 THE DESIGNS ACT 2000 SECTION 30 DESIGN ASSIGNMENT The Design stands in the name of MOTOROLA, INC. registered under the Designs Act, 2000 has been assigned in the Register of Design in the name as follows:- Design No. Class Name , , , , , , , , , , , , , , , , , , , MOTOROLA MOBILITY, INC. OF, 600 NORTH US HIGHWAY 45, LIBERTYVILLE, IL 60048, USA, A DELAWARE CORPORATION 17594

5 OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Priority Number, Priority Date and Priority Country are also shown DESIGN CLASS )LIVON GAS EQUIPMENTS (INDIAN) HOUSE NO-425, SECTOR-21 B, N.I.T., FARIDABAD , HARYANA, INDIA 27/04/2012 COMPRESSED NATURAL GAS KIT NA DESIGN CLASS )MICHELIN RECHERCHE ET TECHNIQUE S.A. ROUTE LOUIS-BRAILLE 10 ET 12, CH-1763 GRANGES- PACCOT, SWITZERLAND 24/01/2012 TIRE TREAD DATE COUNTRY 29/398, /07/2011 U.S.A. DESIGN CLASS )DR. ING. H.C.F. PORSCHE AKTIENGESELLSCHAFT PORSCHEPLATZ 1, STUTTGART, GERMANY NA 02/01/2012 CAR 17595

6 DESIGN CLASS )ASTRAZENECA AB SE SODERTALJE, SWEDEN 03/01/2012 INHALER NA DESIGN CLASS )LEGO A/S AASTVEJ 1, DK-7190 BILLUND, DENMARK 06/01/2012 BUILDING BLOCKS FROM TOY BUILDING SET DATE COUNTRY /07/2011 OHIM DESIGN CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR WASHING MACHINES DATE COUNTRY /06/2011 JAPAN 17596

7 DESIGN CLASS )HOWA MACHINERY, LTD , SUKAGUCHI, KIYOSU- SHI, AICHI-KEN, JAPAN DATE 20/02/2012 ROAD- SWEEPING LORRY COUNTRY 24/08/2011 JAPAN DESIGN CLASS )ARIHANT PLAST K-57, SONAL HEAVY INDL. ESTATE, KACHPADA, MALAD(W), MUMBAI , MAHARASHTRA, INDIA NA 20/04/2012 CONTAINER DESIGN CLASS )TOYOTA JIDOSHA KABUSHIKI KAISHA 1, TOYOTA-CHO, TOYOTA-SHI, AICHI-KEN, , JAPAN 21/09/2011 FRONT BUMPER FOR AN AUTOMOBILE DATE COUNTRY 29/388, /03/2011 U.S.A

8 DESIGN CLASS )PANASONIC CORPORATION 1006, OAZA KADOMA, KADOMA-SHI, OSAKA , JAPAN 09/02/2012 ELECTRIC SHAVER DATE COUNTRY /09/2011 JAPAN DESIGN CLASS )BFT S.P.A., VIA LAGO DI VICO, 44, SCHIO (VI), ITALY 08/08/2011 GATE OPENER DATE COUNTRY /02/2011 CHINA DESIGN CLASS )AUDI AG INGOLSTADT, GERMANY 30/04/2012 VEHICLE WHEEL RIM DATE COUNTRY /11/2011 OHIM 17598

9 DESIGN CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR WALLS AND CEILING DATE COUNTRY /06/2011 JAPAN DESIGN CLASS )SOCIETE DE TECHNOLOGIE MICHELIN 23, RUE BRESCHET-63000, CLERMONT-FERRAND, FRANCE 30/01/2012 TIRE DATE COUNTRY 11/ /08/2011 FRANCE DESIGN CLASS )FLAIR PENS AND STATIONERY INDUSTRIES 63, B/C, GOVT. INDUSTRIAL ESTATE, CHARKOP, KANDIVALI (W), MUMBAI , MAHARASHTRA, INDIA NA 17/04/2012 PEN 17599

10 DESIGN CLASS )ARIHANT PLAST K-57, SONAL HEAVY INDL. ESTATE, KACHPADA, MALAD(W), MUMBAI , MAHARASHTRA, INDIA NA 20/04/2012 CONTAINER DESIGN CLASS )NEOPERL GMBH KLOSTERRUNSSTR, 11, MULLHEIN, GERMANY 20/12/2011 BATHROOM OR KITCHEN FAUCET AERATOR DATE COUNTRY /06/2011 OHIM DESIGN CLASS )LEGO A/S AASTVEJ 1, DK-7190 BILLUND, DENMARK 23/12/2011 TOY DATE COUNTRY DM/ /06/2011 WIPO 17600

11 DESIGN CLASS )EMERSON ELECTRIC CO., 8000 WEST FLORISSANT AVENUE ST. LOUIS, MISSOURI 63136, USA 12/07/2010 PIPE CUTTER DATE COUNTRY 29/353, /01/2010 U.S.A. DESIGN CLASS )X6D LIMITED 199 ARCH MAKARIOS III AVE, NEOCLEOUS HOUSE, 3030 LIMASSOL, CYPRUS 17/06/2011 3D GLASSES DATE COUNTRY 29/381, /12/2010 U.S.A. DESIGN CLASS )HONDA MOTOR CO. LTD. 1-1, MINAMIAOYAMA 2-CHOME, MINATO-KU, TOKYO, JAPAN DATE 04/01/2012 FRONT TOP COVER FOR MOTORCYCLE COUNTRY /07/2011 JAPAN 17601

12 DESIGN CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V. GROENEWOUDSEWEG 1, 5621 B A, EINDHOVEN, THE NETHERLANDS 06/01/2012 SPEAKER DATE COUNTRY /07/2011 NETHERLANDS DESIGN CLASS )AUDI AG INGOLSTADT, GERMANY 30/04/2012 VEHICLE WHEEL RIM DATE COUNTRY /11/2011 OHIM DESIGN CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR REFRIGERATORS DATE COUNTRY /06/2011 JAPAN 17602

13 DESIGN CLASS )KRAFT FOODS SCHWEIZ HOLDING GMBH, CHOLLERSTRASSE 4, 6301 ZUG, SWITZERLAND DATE 19/10/2011 CHOCOLATE BISCUIT SANDWICH COUNTRY /04/2011 OHIM DESIGN CLASS )SOCIETE DE TECHNOLOGIE MICHELIN 23, RUE BRESCHET, FR-63000, CLERMONT-FERRAND, FRANCE 30/01/2012 TIRE DATE COUNTRY 11/ /08/2011 FRANCE DESIGN CLASS )FLAIR PEN AND PLASTIC INDUSTRIES 63, B/C, GOVT. INDUSTRIAL ESTATE, CHARKOP, KANDIVALI (W), MUMBAI , MAHARASHTRA, INDIA NA 17/04/2012 PEN 17603

14 DESIGN DESIGN CLASS )EVIAN SPA & SALON RESOURCES PRIVATE LTD., 54/8, MODEL TOWN, GURGAON , HARYANA, INDIA 16/06/ CLASS )M/S. MOD-TECH INDUSTRIES A-88 ROAD NO. 2, MAHIPALPUR EXTN., NEW DELHI , INDIA NA 24/04/2012 HANDLE SET MASSAGE BED NA DESIGN CLASS )IBIDEN CO., LTD., 1, KANDACHO 2-CHOME, OGAKI-SHI, GIFU, JAPAN 20/07/2011 HOLDING SEAL MENBER DATE COUNTRY /01/2011 JAPAN 17604

15 DESIGN CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V. GROENEWOUDSEWEG 1, 5621 B A, EINDHOVEN, THE NETHERLANDS DESIGN DATE 27/02/2012 CEILING SPOTLIGHT COUNTRY 30/08/2011 OHIM CLASS )MRS..MANJU M. ROHALI AHMED MANSION, 366 1ST FLOOR, LAMINGTON ROAD, GRANT ROAD (E), MUMBAI , NA 23/12/2011 SOLDERING TIP DESIGN CLASS )BERMAD CS LTD., KIBBUTZ EVRON 22808, ISRAEL., 26/12/2011 AIR RELEASE VALVE DATE COUNTRY 29/397, /07/2011 U.S.A

16 DESIGN CLASS )WYW BLOCK AG LANDSTRASSE 140, 9494 SCHAAN, LIECHTENSTEIN 23/03/2012 BUILDING BLOCK NA DESIGN CLASS )YAZAKI CORPORATION 4-28, MITA 1-CHOME, MINATO-KU, TOKYO, JAPAN 26/03/2012 ELECTRICAL CONNECTOR DATE COUNTRY /09/2011 JAPAN DESIGN CLASS )MITSUBISHI AGRICULTURAL MACHINERY CO., LTD., 667-1, IYA HIGASHIZUMO-CHO, MATSUE-CITY, SHIMANE- PREFECTURE, , JAPAN 30/12/2011 THRESHING DRUM FOR THRESHING MACHINE DATE COUNTRY /08/2011 JAPAN 17606

17 DESIGN CLASS )3M INNOVATIVE PROPERTIES COMPANY 3M CENTER, SAINT PAUL, MINNESOTA , USA DATE 20/01/2012 DISPENSER COUNTRY /08/2011 OHIM DESIGN CLASS )EVIAN SPA & SALON RESOURCES PRIVATE LTD., 54/8, MODEL TOWN, GURGAON , HARYANA, INDIA 16/06/2011 MULTIFOLD MASSAGE TABLE NA DESIGN CLASS )IBIDEN CO., LTD., 1, KANDACHO 2-CHOME, OGAKI-SHI, GIFU, JAPAN 20/07/2011 HOLDING SEAL MEMBER DATE COUNTRY /01/2011 JAPAN 17607

18 DESIGN CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V. GROENEWOUDSEWEG 1, 5621 B A, EINDHOVEN, THE NETHERLANDS 27/02/2012 CEILING SPOTLIGHT DATE COUNTRY /08/2011 OHIM DESIGN CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 DATE COUNTRY /06/2011 JAPAN DESIGN CLASS )KRAFT FOODS SCHWEIZ HOLDING GMBH, CHOLLERSTRASSE 4, 6301 ZUG, SWITZERLAND DATE 19/10/2011 CHOCOLATE BISCUIT SANDWICH. COUNTRY /04/2011 OHIM METAL PLATE FOR WASHING MACHINES 17608

19 DESIGN DESIGN CLASS )SOCIETE DE TECHNOLOGIE MICHELIN 23, RUE BRESCHET, FR-63000, CLERMONT-FERRAND, FRANCE 30/01/2012 TIRE TREAD DATE COUNTRY 11/ /08/2011 FRANCE DESIGN CLASS )AUDI AG INGOLSTADT, GERMANY CLASS )AB SKF HORNSGATAN 1, GOTEBORG, SWEDEN., 16/12/2011 BEARING HOUSINGS DATE COUNTRY /06/2011 OHIM 06/03/2012 CAR DATE COUNTRY /09/2011 OHIM 17609

20 DESIGN CLASS )M/S. MOD-TECH INDUSTRIES A-88 ROAD NO. 2, MAHIPALPUR EXTN., NEW DELHI , INDIA 24/04/2012 HANDLE SET NA DESIGN CLASS )PIONEER METAL 1/8, RAMNAGAR, 80 FEET ROAD, B/H K. RASHIKLAL, RAJKOT , GUJARAT, INDIA 02/04/2012 NA HANDLE DESIGN CLASS )DR. ING. H.C.F. PORSCHE AKTIENGESELLSCHAFT PORSCHEPLATZ 1, STUTTGART, GERMANY NA 02/01/2012 CAR 17610

21 DESIGN CLASS )ASTRAZENECA AB SE SODERTALJE, SWEDEN 03/01/2012 INHALER NA DESIGN CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA- KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR WALLS AND CEILING DATE COUNTRY /06/2011 JAPAN ESIGN CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR FRAMES OF BUILDINGS DATE COUNTRY /06/2011 JAPAN 17611

22 DESIGN CLASS )PREETHI KITCHEN APPLIANCES PRIVATE LIMITED TECHNOPOLIS KNOWLEDGE PARK, MAHAKALI CAVES ROAD, CHAKALA, ANDHERI-EAST, MUMBAI , INDIA NA 07/09/2011 JAR OF A MIXER GRINDER DESIGN CLASS )MRS..MANJU M. ROHALI AHMED MANSION, 366 1ST FLOOR, LAMINGTON ROAD, GRANT ROAD (E), MUMBAI , 23/12/2011 NA DESIGN CLASS )XXXLUTZ KG RÖMERSTRASSE 39, 4060 WELS, AUSTRIA 21/03/2012 BOTTLE SET OF SALAD SERVERS DATE COUNTRY /09/2011 OHIM 17612

23 DESIGN CLASS )MANFRED FRANK PATENT HOLDINGS LIMITED (A COMAPANY OF NEW ZEALAND) 222 MOUMOUKAI HIL ROAD, RD5, CLEVEDON,, PAPAKURA, NEW ZEALAND DATE NZ /02/2011 HINGE COUNTRY 09/08/2010 NEW ZEALAND DESIGN CLASS )YAZAKI CORPORATION 4-28, MITA 1-CHOME, MINATO-KU, TOKYO, JAPAN 28/12/2011 DATE COUNTRY /07/2011 JAPAN DESIGN CLASS ELECTRIC CONNECTOR 1)BFT S.P.A., VIA LAGO DI VICO, 44, SCHIO (VI), ITALY 08/08/2011 GATE OPENER DATE COUNTRY X 15/03/2011 CHINA 17613

24 DESIGN CLASS )BIBA APPARELS PVT. LTD. RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI MAHARASHTRA, INDIA 30/04/2012 TEXTILE FABRIC NA DESIGN CLASS )BFT S.P.A., VIA LAGO DI VICO, 44, SCHIO (VI), ITALY 08/08/2011 GATE OPENER DATE COUNTRY X 15/03/2011 CHINA DESIGN CLASS )PANASONIC CORPORATION 1006, OAZA KADOMA, KADOMA-SHI, OSAKA , JAPAN 30/04/2012 RICE COOKER NA 17614

25 DESIGN CLASS )NEWCO., SOCIETER PAR ACTION SIMPLIFIEE (SAS) OF 9 RUE MARCEL SEMBAT-IMMEUBLE LE-SAINT LOUIS NANTES, FRANCE DATE 11/11/2011 STERILISER COUNTRY /05/2011 OHIM DESIGN CLASS )BIBA APPARELS PVT. LTD. RELIABLE HOUSE, HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI /04/2012 TEXTILE FABRIC NA DESIGN CLASS )SMC KABUSHIKI KAISHA AKIHABARA UDX 15F, , SOTOKANDA, CHIYODA-KU, TOKYO , JAPAN DATE /01/2012 FLUID PRESSURE CYLINDER COUNTRY 19/07/2011 JAPAN 17615

26 DESIGN CLASS )SCA HYGIENE PRODUCTS AB SE GOTEBORG, SWEDEN 20/01/2012 PAPER ROLL DISPENSER DATE COUNTRY /08/2011 EUROPEAN UNION DESIGN CLASS )TATA MOTORS LIMITED BOMBAY HOUSE, 24 HOMI MODY STREET, HUTATMA CHOWK, MUMBAI , INDIA NA 30/12/2011 TAILGATE GARNISH OF A VEHICLE DESIGN CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR WALLS AND CEILING DATE COUNTRY /06/2011 JAPAN 17616

27 DESIGN CLASS )FLAIR WRITING INSTRUMENTS 63, B/C, GOVT. INDUSTRIAL ESTATE, CHARKOP, KANDIVALI (W), MUMBAI , MAHARASHTRA, INDIA NA DESIGN 17/04/2012 PEN CLASS ) PREETHI KITCHEN APPLIANCES PRIVATE LIMITED., TECHNOPOLIS KNOWLEDGE PARK, MAHAKALI CAVES ROAD, CHAKALA, ANDHERI-EAST, MUMBAI , INDIA NA DESIGN 27/02/2012 BASE UNIT OF A FOOD PROCESSOR CLASS ) NIPPON STEEL CORPORATION., 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR WASHING MACHINES DATE COUNTRY /06/2011 JAPAN 17617

28 DESIGN CLASS ) MICHELIN RECHERCHE ET TECHNIQUE, S.A., ROUTE LOUIS BRAILLE 10 ET 12, CH-1763 GRANGES-PACCOT, SWITZERLAND 24/01/2012 TIRE TREAD DATE COUNTRY 29/398, /07/2011 U.S.A DESIGN CLASS )FLAIR WRITING INSTRUMENTS 63, B/C, GOVT. INDUSTRIAL ESTATE, CHARKOP, KANDIVALI (W), MUMBAI , MAHARASHTRA, INDIA NA DESIGN 17/04/2012 PEN CLASS )KOSAN KOZMETIK SAN. VE TIC A.S., TURKEY OF GEBZE ORGANIZE SANAYI BOLGESI, IHSAN DEDE CADDESI NO:133, GEBZE KOCAELI, TURKEY NA 20/09/2011 NAIL POLISH BOTTLE WITH COVER 17618

29 DESIGN CLASS ) NIPPON STEEL CORPORATION., 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN 07/12/2011 METAL PLATE FOR AUTOMOBILE PLATE COMPONENTS DATE COUNTRY /06/2011 JAPAN DESIGN CLASS ) CCS INC., 374, OUKAKUEN-CHO, SHIMODACHIURI-AGARU, KARASUMA-DORI, KAMIGYO-KU, KYOTO-CITY, KYOTO , JAPAN 09/06/2010 LED FLUORESCENT LAMP DATE COUNTRY /12/2009 JAPAN DESIGN CLASS ) YAZAKI CORPORATION, 4-28, MITA 1-CHOME, MINATO-KU, TOKYO, JAPAN 28/12/2011 ELECTRIC CONNECTOR DATE COUNTRY /07/2011 JAPAN 17619

30 DESIGN CLASS )BIBA APPARELS PVT. LTD., RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI MAHARASHTRA, INDIA 30/04/2012 TEXTILE FABRIC NA DESIGN CLASS ) PANASONIC CORPORATION., 1006, OAZA KADOMA, KADOMA-SHI, OSAKA , JAPAN 09/02/2012 CHARGER STAND OF ELECTRIC SHAVER DATE COUNTRY /09/2011 JAPAN 17620

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 3 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX) DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011

More information

One machine multiple applications.

One machine multiple applications. One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

European Patent Office Annual Report 2017 Country profile: Netherlands

European Patent Office Annual Report 2017 Country profile: Netherlands European Patent Office Annual Report 207 Country profile: Netherlands Contact: press@epo.org www.epo.org/media Date of publication: 7 March 208 Growth of European patent applications global 48 027 52 703

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Labor Productivity, Compensation Costs, and U.S. International Competitiveness

Labor Productivity, Compensation Costs, and U.S. International Competitiveness Cornell University ILR School DigitalCommons@ILR Federal Publications Key Workplace Documents June 1993 Labor Productivity, Compensation Costs, and U.S. International Competitiveness U.S. Bureau of Labor

More information

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min

More information

David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiter

David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiter David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiters positive action eliminates the inaccuracies of shearing

More information

AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)

AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars) Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721

More information

Infographics on Electromobility (January 2019)

Infographics on Electromobility (January 2019) Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS

More information

Electric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No.

Electric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No. Electric Lowering & Raising System The cost effective maintenance solution for luminaires FEATURES Designed for use of heavier weight light fittings. TYPICAL APPLICATIONS Workshops, Factories, Warehouses

More information

CRES. RoD Actuator. Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant with the RoHS Directives

CRES. RoD Actuator. Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant with the RoHS Directives CRES07_3.3_OCF 13.4.19 11:33 ページ 2 www.thk.ru BERG AB тел. (495) 727-22-72 thk-mail@ya.ru RoD Actuator CRES Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Single-acting pneumatic cylinder type ECS

Single-acting pneumatic cylinder type ECS Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder

More information

ACEA Report. Vehicles in use Europe 2018

ACEA Report. Vehicles in use Europe 2018 ACEA Report Vehicles in use Europe 2018 TABLE OF CONTENTS Summary... 2 Vehicles in use in Europe... 3 Passenger cars... 3 Light commercial vehicles... 4 Medium and heavy commercial vehicles... 5 Buses...

More information

CNC ROTARY TABLE for OKUMA NIKKEN KOSAKUSHO WORKS, LTD.

CNC ROTARY TABLE for OKUMA NIKKEN KOSAKUSHO WORKS, LTD. CNC ROTARY TABLE for OKUMA CNC260OSP4 5AX-350OSP4 NIKKEN KOSAKUSHO WORKS, LTD. Steel Way HRC58 60 Ion Nitrided Worm Wheel HV980 Worm Wheel Material is special NIKKEN order made steel. Specially hardened

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 PRESS EMBARGO: 8.00 AM (7.00 AM GMT), 15 February 2019 NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 Passenger car registrations: 4.6% in 2019 In 2019, the European passenger car market saw a slow start

More information

Winners & Losers by Market - January 2019 vs January 2018

Winners & Losers by Market - January 2019 vs January 2018 Countries 19/18 % Chg LITHUANIA +49,0 ROMANIA +18,8 HUNGARY +9,2 PORTUGAL +8,3 DENMARK +7,0 GREECE +3,7 LATVIA +0,7 POLAND -0,3 FRANCE -1,1 GERMANY -1,4 UNITED KINGDOM -1,6 NORWAY -2,2 LUXEMBOURG -3,4

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02

4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02 P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

The first Solar Investment in Italy for Mitsubishi and INCJ

The first Solar Investment in Italy for Mitsubishi and INCJ The first Solar Investment in Italy for Mitsubishi and INCJ Tokyo, March 19, 2013 Mitsubishi Corporation (MC), Innovation Network Corporation of Japan (INCJ) and Solar Ventures have acquired 100% of Solar

More information

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION *

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION * PRESS EMBARGO: 8.00 AM (6.00 AM GMT), 16 April 2015 NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION * PASSENGER CAR registrations: +8.6% in first quarter; +10.6% in In 2015, demand for new passenger cars

More information

High Accuracy Wire Electrical Discharge Machines

High Accuracy Wire Electrical Discharge Machines Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat

More information

Information Technology and Economic Development: An Introduction to the Research Issues

Information Technology and Economic Development: An Introduction to the Research Issues November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Made UNDER high pressure

Made UNDER high pressure Made UNDER high pressure Made FOR high pressure THE CONTRINEX HIGH-PRESSURE-RESISTANT INDUCTIVE SENSOR SERIES Contrinex is a leading international high-tech sensor company with headquarters in Switzerland.

More information

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 PRESS EMBARGO: 8.00 AM (6.00 AM GMT), 16 June 2017 NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 Passenger car registrations: +5.3% five months into 2017; +7.6% in In 2017, passenger car registrations

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 PRESS EMBARGO: 8.00 AM (6.00 AM GMT), 16 May 2017 NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 Passenger car registrations: +4.7% four months into 2017; 6.6% in In 2017, the number of passenger cars

More information

European Patent Office Annual Report 2018 Country profile: Denmark

European Patent Office Annual Report 2018 Country profile: Denmark Annual Report 208 Country profile: Denmark Contact: press@epo.org www.epo.org/media Date of publication: 2 March 209 Growth of European patent applications global 52 703 60 004 59 087 66 594 74 37 +4.6%

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Total credit to the non-financial sector (core debt), % of GDP Table F1.1

Total credit to the non-financial sector (core debt), % of GDP Table F1.1 Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0

More information

CONTINUED FROM PART 3

CONTINUED FROM PART 3 CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Knife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11

Knife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11 Knife gate valve JTV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-21 issue 11 Knife gate valve JTV Stafsjö s knife gate valve JTV is reliable

More information

1. General company data

1. General company data Self disclosure 1. General company data 1.1. Company address Company: Address: Zip-Code: City: Country: Telephone: Fax: Email: Internet: Established: Affiliation: Ownership: Legal form: CC Reg no: VAT:

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

NI PS-15/16/17 Side Mount Brackets

NI PS-15/16/17 Side Mount Brackets INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power

More information

EROWA MTS The EROWA MTS modular workholding system.

EROWA MTS The EROWA MTS modular workholding system. EROWA MTS The EROWA MTS modular workholding system. Reduce set-up time! System solutions from one single source EROWA MTS The flexible zero point palletizing system for production. Vertical Machining Centers

More information

Civil Dialogue Group on WINE Thursday April 19th, 2018

Civil Dialogue Group on WINE Thursday April 19th, 2018 COMMISSION EUROPÉENNE DIRECTION GÉNÉRALE DE L'AGRICULTURE ET DU DÉVELOPPEMENT RURAL Directorate G. Markets and Observatories G.2. Wine, spirits and horticultural products Bruxelles, le G.2/GD(2017) Civil

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type)

Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This manual is intended

More information

Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump.

Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. MDW series Magnetic drive pumps Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Slide Bearings For Industrial, Marine And Offshore Installations

Slide Bearings For Industrial, Marine And Offshore Installations Slide Bearings For Industrial, Marine And Offshore Installations The advantages of working with RENK Hannover are many; here are a few of particular interest: RENK can boast a depth of experience in bearings

More information

BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst.

BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst. BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st 2016. A Report by Dr. Debasis De, Asst. Director, CLE-ER Poland (Republic of Poland) is one of the countries in Central

More information

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 PRESS EMBARGO: 8.00 AM (6.00 AM GMT), 19 April 2017 NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 Passenger car registrations: +8.4% first three months of 2017; +11.2% in In 2017, EU passenger car registrations

More information

exports of goods annual change (%)

exports of goods annual change (%) 12.0 Austria s foreign trade 2015 by world region imports of goods 2015 exports of goods 2015 region 1 1 share (%) share (%) Europe 106,984 80.4 104,032 79.1 EU 93,686 70.4 90,841 69.1 EFTA 8,020 6.0 8,098

More information

exports of goods annual change (%)

exports of goods annual change (%) 12.0 Austria s foreign trade 2016 by world region imports of goods 2016 exports of goods 2016 region 1 1 share (%) share (%) Europe 110,067 81.2 104,271 79.5 EU 96,801 71.4 91,112 69.4 EFTA 7,718 5.7 8,132

More information

M O T O R V E H I C L E S T A T I S T l C S

M O T O R V E H I C L E S T A T I S T l C S M O T O R V E H I C L E S T A T I S T l C S of Japan 2017 JAPAN AUTOMOBILE MANUFACTURERS ASSOCIATlON, INC. C O N T E N T S Motor Vehicles in Use Cars, Trucks, Buses and Special Purpose Vehicles, 1945-2016

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

OECD unemployment rate stable at 5.8% in August 2017

OECD unemployment rate stable at 5.8% in August 2017 OECD unemployment rate stable at 5.8% in August 017 The OECD unemployment rate was stable at 5.8% in August 017, unchanged since May. Across the OECD area, 36.1 million people were unemployed, 3.5 million

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

BP Statistical Review of World Energy June 2017

BP Statistical Review of World Energy June 2017 BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28

More information

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 PRESS EMBARGO: 8.00 AM (6.00 AM GMT), 17 October 2017 NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 Passenger car registrations: +3.7% over nine months; 2.0% in In 2017, passenger car registrations

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

EHP2 Stainless steel piston accumulator

EHP2 Stainless steel piston accumulator The Professional Choice in Fluid Management EHP2 Stainless steel piston accumulator 2 OILTECH EHP2 STAINLESS STEEL PISTON ACCUMULATOR Oiltech, a member of the Olaer Group, and a global player specialising

More information

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 PRESS EMBARGO: 8.00 AM (7.00 AM GMT), 14 December 2017 NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 Passenger car registrations: +4.1% over 11 months; +5.9% in In 2017, registrations of new passenger

More information

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 PRESS EMBARGO: 8.00 AM (6.00 AM GMT), 17 May 2018 NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 Passenger car registrations: +2.7% four months into 2018; +9.6% in In 2018, the EU passenger car market

More information

OECD unemployment rate stable at 5.3% in July 2018

OECD unemployment rate stable at 5.3% in July 2018 OECD unemployment rate stable at.3% in July 208 The OECD unemployment rate was stable at.3% in July 208. Across the OECD, 33. million people were unemployed,.7 million less than the peak in January 203

More information

Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9

Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9 Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an

More information

Compound screw compressor. C-Series. 1612SSC LLc. Mayekawa Europe nv/sa

Compound screw compressor. C-Series. 1612SSC LLc. Mayekawa Europe nv/sa Compound screw compressor C-Series 1612SSC - 3225LLc Mayekawa Europe nv/sa The mayekawa compound screw compressor c-series is the power of one designed for the duty of two. By combining the high and low

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

HOW TO SEND E-INVOICES TO CARGOTEC

HOW TO SEND E-INVOICES TO CARGOTEC HOW TO SEND E-INVOICES TO CARGOTEC Basware Corporation Copyright Basware Corporation All rights reserved SUPPLIER KIT 2 (11) Contents 1 Cargotec urges to only use 3 2 Cargotec companies currently receiving

More information

Winners & Losers by Market - April 2017 vs April 2016

Winners & Losers by Market - April 2017 vs April 2016 Countries April 17/16 % Chg CROATIA +29,6 1 PORTUGAL +17,8 2 POLAND +14,4 BULGARIA +14,1 LITHUANIA +10,7 SLOVENIA +9,7 HUNGARY +7,7 ROMANIA +7,5 NETHERLANDS +6,3 ESTONIA +4,3 SPAIN +1,1 SLOVAKIA -0,1 CZECH

More information

Winners & Losers by Market - June 2017 vs June 2016

Winners & Losers by Market - June 2017 vs June 2016 Countries June 17/16 % Chg ROMANIA +47,0 1 CYPRUS +46,0 2 LITHUANIA +40,6 ESTONIA +33,7 BULGARIA +31,4 SLOVENIA +16,4 SLOVAKIA +14,5 GREECE +14,4 ITALY +12,9 HUNGARY +11,6 ICELAND +10,2 CROATIA +8,8 POLAND

More information

Annual Statistics 2015

Annual Statistics 2015 Annual Statistics 2015 FEFCO ANNUAL STATISTICS 2015 Tables: Page Key Statistics 2 Total Shipments (Millions of m²) (including Non-Members) 3 Total Shipments ('000 Tonnes) (including Non-Members) 4 Shipments

More information

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1

NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 PRESS EMBARGO: 8.00 AM (7.00 AM GMT), 16 January 2019 NEW PASSENGER CAR REGISTRATIONS EUROPEAN UNION 1 Passenger car registrations: +0.1% in 2018; 8.4% in In 2018, the EU passenger car market declined

More information

PREVIEW. Fieldbus System for Distributed I/O NEW PRODUCTS

PREVIEW. Fieldbus System for Distributed I/O NEW PRODUCTS NEW PRODUCTS PREVIEW Fieldbus System for Distributed I/O! Dual Port EtherNet/IP TM Gateway controls up to 8 Valve Manifolds and 8 Input blocks Controls up to 128 Inputs and 128 Outputs Supports QuickConnect

More information

Knife gate valve MP. Data is only for informational purpose. All specifications are subject to change without notice issue 5

Knife gate valve MP. Data is only for informational purpose. All specifications are subject to change without notice issue 5 Knife gate valve MP Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-11 issue 5 Knife gate valve MP Stafsjö s knife gate valve MP is a full bore

More information

Installation Instructions

Installation Instructions c Installation Instructions Toyota Three Function Internal Reeving Hydraulic Supply Kits This sheet describes the installation of Cascade Three Function Internal Reeving Hydraulic Supply Kits for Toyota

More information

OECD unemployment rate stable at 5.4% in March 2018

OECD unemployment rate stable at 5.4% in March 2018 OECD unemployment rate stable at.4% in March 2018 The OECD unemployment rate remained stable at.4% in March 2018. Across the OECD area, 34 million people were unemployed, 1.4 million more than in April

More information

Chit Chats clients save up to 70% on U.S. and international postage.

Chit Chats clients save up to 70% on U.S. and international postage. ONTARIO RATE CARD 2018 Prices are valid from January 21, 2018 Chit Chats clients save up to 70% on U.S. and international postage. Ship your package to the U.S. as if you were in the U.S. Packages under

More information

WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018

WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018 QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004

Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker

More information