CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
|
|
- Johnathan Bailey
- 5 years ago
- Views:
Transcription
1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 22/02/
2 COPYRIGHT PUBLICATION SL NO CASE NUMBERS RENEWED ON The Patent Office Journal 22/02/
3 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Priority Number, Priority Date and Priority Country are also shown DESIGN NUMBER CLASS )NIPPON STEEL CORPORATION 6-1, MARUNOUCHI 2-CHOME, CHIYODA-KU, TOKYO , JAPAN DATE OF REGISTRATION 07/12/2011 METAL PLATE FOR AUTOMOBILE PLATE COMPONENTS NUMBER DATE COUNTRY /06/2011 JAPAN DESIGN NUMBER CLASS )M/S. SHIELD TECHNOLOGIES NO. 27, VISHWANATHAPURAM, P.M. SWAMY COLONY, RATHINAPURAI, COIMBATORE DATE OF REGISTRATION NA 30/04/2012 SINK CAP DESIGN NUMBER CLASS )P. RAM CHAND & CO., BASTI NAU, JALANDHAR CITY (PUNJAB) INDIA. AN INDIAN PARTNERSHIP FIRM WHOSE PARTNERS ARE :- YASH PAUL, SAVITA SHARMA, AMIT SHARMA BEING INDIAN NATIONALS OF THE ABOVE ADDRESS DATE OF REGISTRATION 20/07/2012 THROW-BALL NA The Patent Office Journal 22/02/
4 DESIGN NUMBER CLASS )DABUR INDIA LIMITED CORPORATE OFFICE KAUSHAMBI, SAHIBABAD , DISTT. GHAZIABAD (U.P.) INDIA, AN INDIAN COMPANY DATE OF REGISTRATION 24/07/2012 SPOON NA DESIGN NUMBER CLASS )RECKITT & COLMAN (OVERSEAS) LIMITED, A BRITISH COMPANY OF BATH ROAD, SLOUGH BERKSHIRE, SL1 3UH, UNITED KINGDOM DATE OF REGISTRATION 10/05/2012 CAP FOR AN AEROSOL CONTAINER NUMBER DATE COUNTRY /11/2011 OHIM DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V., A COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF THE KINGDOM OF THE NETHERLANDS, RESIDING AT EINDHOVEN, WHOSE POST-OFFICE ADDRESS IS GROENEWOUDSEWEG 1, 5621 BA, EINDHOVEN, THE NETHERLANDS DATE OF REGISTRATION 10/05/2012 CUSHION FOR A PATIENT INTERFACE ASSEMBLY NUMBER DATE COUNTRY /11/2011 OHIM The Patent Office Journal 22/02/
5 DESIGN NUMBER CLASS )GODREJ & BOYCE MFG. CO. LTD., A COMPANY INCORPORATED UNDER INDIAN COMPANIES ACT 1913, GODREJ INTERIO, PLANT 4, PIROJSHANAGER, VIKHROLI (WEST), MUMBAI , INDIA DATE OF REGISTRATION 15/05/2012 MOBILE DESK WITH MEDIA SCREEN NA DESIGN NUMBER CLASS )GOLD MEDAL ELECTRICALS PVT. LTD. A COMPANY REGISTERED UNDER COMPANY ACT 1956 OF, 22/23 SHUBH BUILDING, SAGAR MANTHAN INDUSTRIAL COMPLEX, BHOIDAPADA, VASAI (E), THANE DATE OF REGISTRATION 18/05/2012 NA MODULE PLATE DESIGN NUMBER CLASS )ITOKI CORPORATION, A JAPANESE COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF JAPAN, MANUFACTURERS AND MERCHANTS, OF THE ADDRESS 4-12, IMAFUKU-HIGASHI 1-CHOME, JOTO-KU, OSAKA-SHI, OSAKA , JAPAN DATE OF REGISTRATION 27/06/2012 CHAIR NUMBER DATE COUNTRY /03/2012 JAPAN The Patent Office Journal 22/02/
6 DESIGN NUMBER CLASS )TICONA LLC 8040 DIXIE HIGHWAY, FLORENCE, KENTUCKY 41042, US DATE OF REGISTRATION 09/03/2012 PACKAGING NUMBER DATE COUNTRY 29/401, /09/2011 U.S.A. DESIGN NUMBER CLASS )WEENER EMPIRE PLASTICS LTD., (AN INDIAN PRIVATE LIMITED COMPANY REGISTERED UNDER THE INDIAN COMPANIES ACT, 1956), OF 19/A MIRA CO-OP. INDUSTRIAL ESTATE, NEAR STATE BANK OF INDIA, OPP. AMAR PALACE HOTEL, MIRA ROAD, THANE , MAHARASHTRA, INDIA DATE OF REGISTRATION 24/07/2012 BOTTLE NA DESIGN NUMBER CLASS )M/S. SHIELD TECHNOLOGIES NO. 27, VISHWANATHAPURAM, P.M. SWAMY COLONY, RATHINAPURAI, COIMBATORE DATE OF REGISTRATION 30/04/2012 SINK CAP NA The Patent Office Journal 22/02/
7 DESIGN NUMBER CLASS )X & O CLOTHING PVT. LTD., (AN INDIAN PRIVATE LIMITED COMPANY REGISTERED UNDER THE INDIAN COMPANIES ACT, 1956), OF 3, THAKUR COMPOUND, 1ST FLOOR, NEXT TO ABB, USV LTD., LANE, OFF. B.S. DEVSHI MARG, GOVANDI(EAST), MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 10/05/2012 GARMENT (SET) NA DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V., A COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF THE KINGDOM OF THE NETHERLANDS, RESIDING AT EINDHOVEN, WHOSE POST-OFFICE ADDRESS IS GROENEWOUDSEWEG 1, 5621 BA, EINDHOVEN, THE NETHERLANDS DATE OF REGISTRATION 10/05/2012 FRAME FOR A PATIENT INTERFACE ASSEMBLY NUMBER DATE COUNTRY /11/2011 OHIM DESIGN NUMBER CLASS )GODREJ & BOYCE MFG. CO. LTD., A COMPANY INCORPORATED UNDER INDIAN COMPANIES ACT 1913, GODREJ INTERIO, PLANT 4, PIROJSHANAGER, VIKHROLI (WEST), MUMBAI , INDIA DATE OF REGISTRATION 15/05/2012 WORK DESK NA The Patent Office Journal 22/02/
8 DESIGN NUMBER CLASS )OTIS ELEVATOR COMPANY 10 FARM SPRINGS, FARMINGTON, CONNECTICUT , UNITED STATES OF AMERICA DATE OF REGISTRATION 04/11/2011 TOUCH PAD FOR ENTERING A DESTINATION FLOOR IN AN ELEVATOR SYSTEM NUMBER DATE COUNTRY /05/2011 REPUBLIC OF KOREA DESIGN NUMBER CLASS )COMPAGNIE GENERALE DES ETABLISSEMENTS MICHELIN, A FRENCH COMPANY OF 12 COURS SABLON-F-63000, CLERMONT-FERRAND-FRANCE, AND MICHELIN RECHERCHE ET TECHNIQUE S.A., A SWISS COMPANY OF ROUTE LOUIS BRAILLE 10-CH-1763 GRANGES-PACCOT- SWITZERLAND DATE OF REGISTRATION 18/05/2012 TIRE NUMBER DATE COUNTRY 11/ /11/2011 FRANCE DESIGN NUMBER CLASS )ARTI PRADUMAN ASHER, INDIAN NATIONAL, OF 106-B DHANRAJ INDUSTRIAL ESTATES, SITARAM JADHAV MARG, LOWER PAREL, MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 24/07/2012 SOLDERING IRON NA The Patent Office Journal 22/02/
9 DESIGN NUMBER CLASS )HARESH P. PATEL AN INDIAN NATIONAL SOLE PROPRIETOR OF DAKSHA ELECTRONICS AN INDIAN PROPRIETORSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT PLOT NO. 235, G.I.D.C.-1, MODHERA ROAD, PHASE-1, MEHSANA-2, GUJARAT-INDIA DATE OF REGISTRATION 15/06/2012 RELAY NA DESIGN NUMBER CLASS )M/S. SHIELD TECHNOLOGIES NO. 27, VISHWANATHAPURAM, P.M. SWAMY COLONY, RATHINAPURAI, COIMBATORE DATE OF REGISTRATION NA 30/04/2012 BATHROOM DRAIN CAP DESIGN NUMBER CLASS )EAZI PEN EXPORTS (A REGISTERED PARTNERSHIP FIRM) GALA NO. 6 1ST FL, HABIB PATEL BUILDING, FATHERWADI, NEAR VIDYAVIKASINI SCHOOL, VASAI (EAST) DIST HANE STATE OF MAHARASHTRA, INDIA, WHOSE PARTNERS ARE MANJOJ KUMAR PRABHAKARAN KURIYKKOT, AND MOHAMMAD ALTAF PUTTER. OF THE ABOVE MENTIONED ADDRESS DATE OF REGISTRATION 08/05/2012 PEN NA The Patent Office Journal 22/02/
10 DESIGN NUMBER CLASS )X & O CLOTHING PVT. LTD., (AN INDIAN PRIVATE LIMITED COMPANY REGISTERED UNDER THE INDIAN COMPANIES ACT, 1956), OF 3, THAKUR COMPOUND, 1ST FLOOR, NEXT TO ABB, USV LTD., LANE, OFF. B.S. DEVSHI MARG, GOVANDI(EAST), MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 10/05/2012 NA GARMENT DESIGN NUMBER CLASS )MANJUSHREE TECHNOPACK LIMITED, OF 143, C-5, BOMMASANDRA INDUSTRIAL AREA, HOSUR ROAD, BANGALORE , KARNATAKA, INDIA, AN INDIAN COMPANY DATE OF REGISTRATION 10/05/2012 JAR NA DESIGN NUMBER CLASS )ILLINOIS TOOL WORKS INC., 3600 WEST LAKE AVENUE GLENVIEW, IL UNITED STATES OF AMERICA DATE OF REGISTRATION 06/09/2011 PACKAGE ON PALLET WRAPPED WITH WRAPPING SHEET NUMBER DATE COUNTRY /03/2011 OHIM The Patent Office Journal 22/02/
11 DESIGN NUMBER CLASS )KABUSHIKI KAISHA SOMIC ISHIKAWA HONJO , SUMIDA-KU, TOKYO-KU, TOKYO, JAPAN DATE OF REGISTRATION 08/11/2011 SHOCK ABSORBING DAMPER FOR VEHICLES NA DESIGN NUMBER CLASS )KLIO-ETERNA SCHREIBGERATE GMBH & CO KG, OF GLASHüTTENWEG 7, WOLFACH, GERMANY DATE OF REGISTRATION 25/07/2012 BALLPOINT PEN NUMBER DATE COUNTRY /02/2012 WIPO DESIGN NUMBER CLASS )ARCHANA KONWAR VILLAGE BORDOLOPA, P.O: KACHARIPATHAR, DT: DHEMAJI, ASSAM DATE OF REGISTRATION 29/12/2011 CRUTCH NA The Patent Office Journal 22/02/
12 DESIGN NUMBER CLASS )B. SINDHIYA, PROPRIETRIX OF SINDHIYA PLASTIC INDUSTRIES-, AT S.F.NO. 630/1, SUNDAKAMUTHUR ROAD, VAIYAPURAI PUDUR, COIMBATORE-26, TAMILNADU, INDIA, INDIAN-NATIONAL OF ABOVE ADDRESS DATE OF REGISTRATION 08/05/2012 CHAIR NA DESIGN NUMBER CLASS )X & O CLOTHING PVT. LTD., (AN INDIAN PRIVATE LIMITED COMPANY REGISTERED UNDER THE INDIAN COMPANIES ACT, 1956), OF 3, THAKUR COMPOUND, 1ST FLOOR, NEXT TO ABB, USV LTD., LANE, OFF. B.S. DEVSHI MARG, GOVANDI(EAST), MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 10/05/2012 GARMENT (SET) NA DESIGN NUMBER CLASS )MANIBHADRA PLASTIC INDUSTRIES, A PARTNERSHIP FIRM REGISTERED UNDER THE PROVISION OF INDIAN PARTNERSHIP ACT, 1932, HAVING OFFICE ADDRESS AT PLOT NO. C-1/2609, PHASE III, GIDC, VAPI , GUJARAT DATE OF REGISTRATION 10/05/2012 JUG NA The Patent Office Journal 22/02/
13 DESIGN NUMBER CLASS )NOVARTIS AG, A CORPORATION ORGANIZED AND EXISTING UNDER THE LAW OF SWITZERLAND, OF LICHTSTRASSE 35, 4056 BASEL, SWITZERLAND DATE OF REGISTRATION 15/05/2012 MEDICINE INJECTOR NUMBER DATE COUNTRY 29/ /11/2011 U.S.A. DESIGN NUMBER CLASS )MRS. P. KANAGA LAKSHMI (INDIAN), PROPRIETRIX OF M/S. LNP PACKAGING, OLD NO. 347/3, NEW NO. 1/401, ARCOT ROAD, SIRAKALATHUR, KUNDRATHUR, CHENNAI , INDIA DATE OF REGISTRATION 03/07/2012 BOX NA DESIGN NUMBER CLASS )NILESH V. SHAH, AN INDIAN NATIONAL, TRADING AS PALLADIUM PRODUCTS, AN INDIAN PROPRIETORY CONCERN OF THE ADDRESS SURVEY NO. 126, JAMNAGAR - KHAMBHALIA HIGHWAY, AT & POST - VASAI , DIST. JAMNAGAR (GUJARAT) INDIA DATE OF REGISTRATION 28/05/2012 HANDLE NA The Patent Office Journal 22/02/
14 DESIGN NUMBER CLASS )COMPAGNIE GENERALE DES ETABLISSEMENTS MICHELIN, A FRENCH COMPANY OF 12 COURS SABLON, FR-63000, CLERMONT-FERRAND, FRANCE, AND MICHELIN RECHERCHE ET TECHNIQUE S.A., A SWISS COMPANY OF ROUTE LOUIS BRAILLE 10, CH-1763, GRANGES-PACCOT, SWITZERLAND DATE OF REGISTRATION 04/06/2012 TIRE TREAD NUMBER DATE COUNTRY 29/408,044 06/12/2011 U.S.A. DESIGN NUMBER CLASS )FIAT GROUP AUTOMOBILES S.P.A., ITALIAN JOINT STOCK COMPANY OF CORSO GIOVANNI AGNELLI 200, I TORINO (ITALY) DATE OF REGISTRATION 25/07/2012 TOY CAR NUMBER DATE COUNTRY DM/ /02/2012 WIPO DESIGN NUMBER CLASS )M/S. SHIELD TECHNOLOGIES NO. 27, VISHWANATHAPURAM, P.M. SWAMY COLONY, RATHINAPURAI, COIMBATORE DATE OF REGISTRATION 30/04/2012 NA BATHROOM DRAIN CAP The Patent Office Journal 22/02/
15 DESIGN NUMBER CLASS )BLUE STAR LIMITED, A COMPANY INCORPORATED UNDER THE COMPANIES ACT, 1956 WHOSE ADDRESS IS KASTURI BUILDINGS, MOHAN T. ADVANI CHOWK, JAMSHEDJI TATA ROAD, MUMBAI DATE OF REGISTRATION 20/07/2012 WATER COOLER CUM FILTER NA DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V., A COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF THE KINGDOM OF THE NETHERLANDS, RESIDING AT EINDHOVEN, WHOSE POST-OFFICE ADDRESS IS GROENEWOUDSEWEG 1, 5621 BA, EINDHOVEN, THE NETHERLANDS DATE OF REGISTRATION 10/05/2012 CUSHION FOR A PATIENT INTERFACE ASSEMBLY NUMBER DATE COUNTRY /11/2011 OHIM DESIGN NUMBER CLASS )HONDA MOTOR CO., LTD., A CORPORATION OF JAPAN OF 1-1, MINAMI-AOYAMA 2-CHOME, MINATO-KU, TOKYO, JAPAN DATE OF REGISTRATION 14/05/2012 SIDE COVER FOR MOTORCYCLES NUMBER DATE COUNTRY /11/2011 JAPAN The Patent Office Journal 22/02/
16 DESIGN NUMBER CLASS )ITOKI CORPORATION, A JAPANESE COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF JAPAN, MANUFACTURERS AND MERCHANTS OF THE ADDRESS 4-12, IMAFUKU-HIGASHI 1-CHOME, JOTO-KU, OSAKA-SHI, OSAKA , JAPAN DATE OF REGISTRATION 15/05/2012 DESK NUMBER DATE COUNTRY /11/2011 JAPAN DESIGN NUMBER CLASS )GOLD MEDAL ELECTRICALS PVT. LTD. A COMPANY REGISTERED UNDER COMPANY ACT 1956 OF, 22/23 SHUBH BUILDING, SAGAR MANTHAN INDUSTRIAL COMPLEX, BHOIDAPADA, VASAI (E), THANE DATE OF REGISTRATION 18/05/2012 MODULE PLATE NA DESIGN NUMBER CLASS )M/S. AKTION SAFETY SOLUTION PVT. LTD. (A COMPANY INCORPORATED UNDER THE INDIAN COMPANIES ACT, 1956), 1327, STREET KUNDEWALAN, AJMERI GATE, DELHI DATE OF REGISTRATION 23/05/2012 SOLE OF SHOE NA The Patent Office Journal 22/02/
17 DESIGN NUMBER CLASS )OMRON HEALTHCARE CO., LTD., A COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF JAPAN, OF 53, KUNOTSUBO, TERADO-CHO, MUKO-SHI, KYOTO , JAPAN DATE OF REGISTRATION 24/05/2012 ATOMIZER FOR INHALER NUMBER DATE COUNTRY /11/2011 JAPAN DESIGN NUMBER CLASS )TICONA LLC 8040 DIXIE HIGHWAY, FLORENCE, KENTUCKY 41042, US DATE OF REGISTRATION 09/03/2012 PACKAGING NUMBER DATE COUNTRY 29/401, /09/2011 U.S.A. DESIGN NUMBER CLASS )GODREJ & BOYCE MFG. CO. LTD. OF LOCKS DIVISION (PLANT-18), PIROJSHANAGAR, VIKHROLI, MUMBAI , MAHARASHTRA, INDIA, INDIAN COMPANY DATE OF REGISTRATION 24/07/2012 HANDLE NA The Patent Office Journal 22/02/
18 DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V., A COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF THE KINGDOM OF THE NETHERLANDS, RESIDING AT EINDHOVEN, WHOSE POST-OFFICE ADDRESS IS GROENEWOUDSEWEG 1, 5621 BA, EINDHOVEN, THE NETHERLANDS DATE OF REGISTRATION 07/06/2012 BEARDTRIMMER NUMBER DATE COUNTRY /12/2011 OHIM DESIGN NUMBER CLASS )KROSAKIHARIMA CORPORATION, OF 1-1, HIGASHIHAMA-MACHI, YAHATANISHI-KU, KITAKYUSHU-SHI, FUKUOKA, , JAPAN, A JAPANESE COMPANY DATE OF REGISTRATION 07/05/2012 REFRACTORY SPRAYING MACHINE NUMBER DATE COUNTRY /11/2011 JAPAN DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V., A COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF THE KINGDOM OF THE NETHERLANDS, RESIDING AT EINDHOVEN, WHOSE POST-OFFICE ADDRESS IS GROENEWOUDSEWEG 1, 5621 BA, EINDHOVEN, THE NETHERLANDS DATE OF REGISTRATION 10/05/2012 PATIENT INTERFACE ASSEMBLY NUMBER DATE COUNTRY /11/2011 OHIM The Patent Office Journal 22/02/
19 DESIGN NUMBER CLASS )VALLABHBHAI DEVDASBHAI AMIPARA AN INDIAN NATIONAL SOLE PROPRIETOR OF SIGMA ENTERPRISE AN INDIAN PROPRIETORSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT SHRI HARI IND. ZONE-2, NR. MUNJAPARA INDUSTRIES, AKASH RESTAURANT STREET, AJI RING ROAD, RAJKOT-2, GUJARAT - INDIA DATE OF REGISTRATION 15/05/2012 HANDLE NA DESIGN NUMBER CLASS )SKN ASSOCIATES PVT. LTD. SKN HOUSE, E-71, NEW DELHI SOUTH EXTN., PART-I, NEW DELHI , INDIA, AN INDIAN COMPANY REGISTERED UNDER THE PROVISIONS OF INDIAN COMPANIES ACT, 1956, OF THE ABOVE ADDRESS DATE OF REGISTRATION 15/05/2012 NA VACUUM VAPORISER DESIGN NUMBER CLASS )GOLD MEDAL ELECTRICALS PVT. LTD. A COMPANY REGISTERED UNDER COMPANY ACT 1956 OF, 22/23 SHUBH BUILDING, SAGAR MANTHAN INDUSTRIAL COMPLEX, BHOIDAPADA, VASAI (E), THANE DATE OF REGISTRATION 18/05/2012 MODULE PLATE NA The Patent Office Journal 22/02/
20 DESIGN NUMBER CLASS )LG HAUSYS, LTD., A KOREAN CORPORATION, ONE IFC BUILDING, 10 GUKJEGEUMYUNG-RO, YEONGDEUNGPO-GU, SEOUL, REPUBLIC OF KOREA DATE OF REGISTRATION 26/06/2012 SYNTHETIC RESIN PAPER NUMBER DATE COUNTRY KR /01/2012 REPUBLIC OF KOREA DESIGN NUMBER CLASS )MUDITA MULL MULL BUILDINGS, 4, ASHOK MARG, LUCKNOW , INDIA DATE OF REGISTRATION 25/01/2012 PLATE NA DESIGN NUMBER CLASS )MORPHUN RESEARCH LIMITED, A COMPANY REGISTERED IN THE UNITED KINGDOM OF 7 CHESTERFIELD ROAD, LONDON, W4 3HG, UNITED KINGDOM DATE OF REGISTRATION 21/05/2012 BUILDING BLOCK OF A TOY NUMBER DATE COUNTRY /04/2012 EUROPEAN UNION The Patent Office Journal 22/02/
21 DESIGN NUMBER CLASS )GODREJ & BOYCE MFG. CO. LTD. OF LOCKS DIVISION (PLANT-18), PIROJSHANAGAR, VIKHROLI, MUMBAI , MAHARASHTRA, INDIA, INDIAN COMPANY DATE OF REGISTRATION 24/07/2012 NA HANDLE DESIGN NUMBER CLASS )ERUM HANGERS PRIVATE LIMITED, AN INDIAN COMPANY, OF W-143 GREATER KAILASH-II, NEW DELHI , INDIA DATE OF REGISTRATION 06/08/2012 CLOTH HANGER NA DESIGN NUMBER CLASS )TOSHIBA ELEVATOR KABUSHIKI KAISHA, A JAPANESE CORPORATION, OF 5-27, KITASHINAGAWA 6-CHOME, SHINAGAWA-KU, TOKYO, JAPAN DATE OF REGISTRATION 11/06/2012 OPERATION PANEL FOR ELEVATOR CAR NUMBER DATE COUNTRY /12/2011 JAPAN The Patent Office Journal 22/02/
22 DESIGN NUMBER CLASS )KASSEL, HARRY DEAN NO. 1 SHORT ROAD, MORNINGSIDE, SANDTON, GAUTENG, SOUTH AFRICA DATE OF REGISTRATION 30/04/2012 A HEAT EXCHANGER ASSEMBLY NUMBER DATE COUNTRY F2012/ /10/2011 SOUTH AFRICA DESIGN NUMBER CLASS )GLAXO GROUP LIMITED OF THE ADDRESS GLAXO WELLCOME HOUSE, BERKELEY AVENUE, GREENFORD, MIDDLESEX UB6 0NN, UNITED KINGDOM DATE OF REGISTRATION 20/07/2012 BOTTLE NUMBER DATE COUNTRY GB /01/2012 U.K. DESIGN NUMBER CLASS )M/S. NIRMAL PACKAGING SYSTEM, A PRIVATE LIMITED COMPANY INCORPORATED UNDER COMPANIES ACT, 1956, HAVING ITS OFFICE AT PLOT NO. 148, FUNCTIONAL INDUSTRIAL ESTATE, PATPARGANJ, DELHI , INDIA DATE OF REGISTRATION 09/05/2012 NA CASE The Patent Office Journal 22/02/
23 DESIGN NUMBER CLASS )JALPESHBHAI S. GOSWAMI AND NILESHBHAI S. GOSWAMI BOTH INDIAN NATIONAL PARTNERS OF RUSHIV TECHNOCAST AN INDIAN PARTNERSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT 80 FEET ROAD, NEAR ACCURATE WEIGH BRIDGE, NEAR AJI VASAHAT, RAJKOT, GUJARAT - INDIA DATE OF REGISTRATION 10/05/2012 HANDLE NA DESIGN NUMBER CLASS )SKN ASSOCIATES PVT. LTD. SKN HOUSE, E-71, NEW DELHI SOUTH EXTN., PART-I, NEW DELHI , INDIA, AN INDIAN COMPANY REGISTERED UNDER THE PROVISIONS OF INDIAN COMPANIES ACT, 1956, OF THE ABOVE ADDRESS DATE OF REGISTRATION 15/05/2012 NA MULTI POINT FUEL INJECTION VAPORISER DESIGN NUMBER CLASS )ILLINOIS TOOL WORKS INC., 3600 WEST LAKE AVENUE GLENVIEW, IL UNITED STATES OF AMERICA DATE OF REGISTRATION 06/09/2011 PACKAGE ON PALLET WRAPPED WITH WRAPPING SHEET NUMBER DATE COUNTRY /03/2011 OHIM The Patent Office Journal 22/02/
24 DESIGN NUMBER CLASS )MUDITA MULL MULL BUILDINGS, 4, ASHOK MARG, LUCKNOW , INDIA DATE OF REGISTRATION 25/01/2012 PLATE NA DESIGN NUMBER CLASS )ADM21 CO., LTD. A KOREAN CORPORATION, 607, HAKDANG-RI, CHEONGYANG-EUP, CHEONGYANG-GUN, CHUNGCHEONGNAM-DO, REPUBLIC OF KOREA DATE OF REGISTRATION 06/08/2012 WIPER FOR AUTOMOBILES NUMBER DATE COUNTRY /04/2012 REPUBLIC OF KOREA DESIGN NUMBER CLASS )LIGHTING FIXTURE PRIVATE LIMITED C-95, SECTOR-2, NOIDA DATE OF REGISTRATION 08/06/2012 LIGHTING FIXTURE NA The Patent Office Journal 22/02/
25 DESIGN NUMBER CLASS )ABB TECHNOLOGY AG, A SWISS COMPANY OF AFFOLTERNSTRASSE 44, 8050 ZURICH, SWITZERLAND DATE OF REGISTRATION 12/06/2012 CONVERTER HOUSING NUMBER DATE COUNTRY DM/ /12/2011 WIPO DESIGN NUMBER CLASS )KAUSHIK RUBBER INDUSTRIES, HARI DASS COLONY, PATIALA ROAD, NABHA (PUNJAB) INDIA AN INDIAN PROPRIETORSHIP FIRM WHOSE PROPRIETOR IS SAROJ BALA BEING INDIAN NATIONALS OF THE ABOVE ADDRESS DATE OF REGISTRATION 20/07/2012 NA BUSH FOR AGRICULTURAL MACHINERY DESIGN NUMBER CLASS )X & O CLOTHING PVT. LTD., (AN INDIAN PRIVATE LIMITED COMPANY REGISTERED UNDER THE INDIAN COMPANIES ACT, 1956), OF 3, THAKUR COMPOUND, 1ST FLOOR, NEXT TO ABB, USV LTD., LANE, OFF. B.S. DEVSHI MARG, GOVANDI(EAST), MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 10/05/2012 GARMENT NA The Patent Office Journal 22/02/
26 DESIGN NUMBER CLASS )ILLINOIS TOOL WORKS INC., 3600 WEST LAKE AVENUE GLENVIEW, IL UNITED STATES OF AMERICA DATE OF REGISTRATION 06/09/2011 PACKAGE ON PALLET WRAPPED WITH WRAPPING SHEET NUMBER DATE COUNTRY /03/2011 OHIM DESIGN NUMBER CLASS )MUDITA MULL MULL BUILDINGS, 4, ASHOKE MARG, LUCKNOW , INDIA DATE OF REGISTRATION NA 25/01/2012 BOWL DESIGN NUMBER CLASS )LG ELECTRONICS INC. 20 YEOUIDO - DONG, YEONGDEUNGPO - GU, SEOUL , REPUBLIC OF KOREA A CORPORATION INCORPORATED UNDER THE LAWS OF THE REPUBLIC OF KOREA DATE OF REGISTRATION 31/05/2012 REFRIGERATOR NUMBER DATE COUNTRY /12/2011 REPUBLIC OF KOREA The Patent Office Journal 22/02/
27 DESIGN NUMBER CLASS )ABB OY, A COMPANY OF FINLAND OF STRÃ MBERGINTIE 1, FI HELSINKI, FINLAND DATE OF REGISTRATION 24/07/2012 SWITCH NUMBER DATE COUNTRY /02/2012 OHIM The Patent Office Journal 22/02/
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationAUTHORITY FOR ADVANCE RULINGS (INCOME TAX)
DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationBTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst.
BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st 2016. A Report by Dr. Debasis De, Asst. Director, CLE-ER Poland (Republic of Poland) is one of the countries in Central
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationHigh Accuracy Wire Electrical Discharge Machines
Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationYASKAWA AC DRIVES. Application Solution. Extruder. YASKAWA AC Drive GA700. YASKAWA Matrix Converter U1000
YASKAWA AC DRIVES Application Solution Extruder YASKAWA AC Drive YASKAWA Matrix Converter For Extruder YASKAWA provides the answers to your extruder needs. YASKAWA ELECTRIC always stands in the shoes of
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More information10N M6 Series Right Angle Grinder
Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More information15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
More informationKare Zindagi Instant Start
Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best
More informationHORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number
c Parts Manual Model Serial Number Bale Clamp 40D-BCB-A R0 corporation To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com
More informationCONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More information10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationExport Oriented Enterprises (EOE) 3 rd Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the
Export Oriented Enterprises (EOE) 3 rd Quarter 2017 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises
More informationExport Oriented Enterprises (EOE) 1st Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the
Export Oriented Enterprises (EOE) 1st Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationExport Oriented Enterprises (EOE) 2nd Quarter 2018
Export Oriented Enterprises (EOE) 2nd Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationEuropean Patent Office Annual Report 2017 Country profile: Netherlands
European Patent Office Annual Report 207 Country profile: Netherlands Contact: press@epo.org www.epo.org/media Date of publication: 7 March 208 Growth of European patent applications global 48 027 52 703
More informationParts Manual. cascade
c Parts Manual Model Serial Number D-RR-24A 892 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Rotator Group 4 2 7 8 RR02.ill $ # @! 9 0 REF QTY
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More information10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
More informationOne machine multiple applications.
One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >
More informationAiretool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
More informationParts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More information10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-842EN 10LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-842EN Dotco Nomenclature XX L F 2 XX - XX
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade. Single-Double Pallet Handler. Model 50D-ES-012. Serial Number
c Parts Manual Model Single-Double Pallet Handler Serial Number 50D-ES-02 To Order Parts call: 888-227-22, Fax: 888-29-024 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Safety Decals
More informationCONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationSlide Bearings For Industrial, Marine And Offshore Installations
Slide Bearings For Industrial, Marine And Offshore Installations The advantages of working with RENK Hannover are many; here are a few of particular interest: RENK can boast a depth of experience in bearings
More informationHOW TO SEND E-INVOICES TO CARGOTEC
HOW TO SEND E-INVOICES TO CARGOTEC Basware Corporation Copyright Basware Corporation All rights reserved SUPPLIER KIT 2 (11) Contents 1 Cargotec urges to only use 3 2 Cargotec companies currently receiving
More informationN60 Rotary Vane Pneumatic Motor
Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model
More informationSetting a New Standard in Emission Testing MOTOR EXHAUST GAS ANALYZER TEST SYSTEM CONCEPT MEXA-ONE offers an intuitive user interface with a highly efficient hardware and software design. This results in
More informationGRIPPER CHAIN. For form, fill, and vacuum seal wrapping applications. Lower maintenance costs Increased uptime Increased productivity
GRIPPER CHAIN For form, fill, and vacuum seal wrapping applications Lower maintenance costs Increased uptime Increased productivity A formidable new force has taken hold of wrapping operations. Get a Grip
More informationCONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationYASKAWA AC DRIVES. Application Solution. Injection Molding Machine. YASKAWA AC Drive GA700. YASKAWA Matrix Converter U1000
YASKAWA AC DRIVES Application Solution Injection Molding Machine YASKAWA AC Drive YASKAWA Matrix Converter For Injection Molding Machine YASKAWA provides the answers to your injection molding machine needs.
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade
c Parts Manual Model 36G-CCT Tipping Clamp Catalog Number 36G74237 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Blank 1 Safety Decals 4 1 3 2
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationOECD unemployment rate stable at 5.8% in August 2017
OECD unemployment rate stable at 5.8% in August 017 The OECD unemployment rate was stable at 5.8% in August 017, unchanged since May. Across the OECD area, 36.1 million people were unemployed, 3.5 million
More informationCooling systems for rolling stock
Cooling systems for rolling stock Siemens AG, München/ Berlin AKG is a global partner and supplier of cooling technology components and systems. The AKG Group develops and produces worldwide systems for
More informationParts Manual. cascade
c Parts Manual Model Serial Number Revolving Drum Clamp D-DFR-AR0 corporation To Order Parts call: 888--, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationInformation Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationOur cleaning science gets you back to business faster. Chematic Cleaners
Our cleaning science gets you back to business faster Chematic Cleaners Chematic Cleaners Achieve significant time and cost savings by using Chematic for effective cleaning processes. Clear view on the
More informationCHAPTER 4 Motor Load factor Survey
CHAPTER 4 Motor Load factor Survey 4.1 Introduction Over sizing of equipment / induction motor can be measured in terms of load factor. Load factor is defined as the ratio between actual load to rated
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Carton Clamp 35D-CCS-35A R3 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Blank Safety Decals 2 cascade 2 cascade
More informationParts Manual. cascade
c Parts Manual Model Single-Double Pallet Handler Serial Number -FDS-53 corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com Cascade is a Registered Trademark
More informationDOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
More informationSlide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines
Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines Centre flange mounted slide bearing type EM 9S The RENK EM 9S bearing is a fully self-contained, centre
More informationGlobal Polybutadiene Rubber (BR) Market Study ( )
Global Polybutadiene Rubber (BR) Market Study (2014 2025) Table of Contents 1. INTRODUCTION 1.1. Introduction to Polybutadiene Rubber Market Product Description Properties Industry Structure Value Chain
More informationTable 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016)
Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016) S.No. Tractor company / model 1.0 New Holland Tractors, Gautam Budh Nagar, Uttar Pradesh 1.1 Tractor
More informationAUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
More informationParts Manual. cascade. corporation. Sideshifter. Model 100E-SSS-B203 R0. Serial Number
c Parts Manual Model Serial Number Sideshifter 100E-SSS-B203 R0 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write:
More informationYASKAWA AC Drive-V1000
YASKAWA AC Drive-J1000 Compact V/f Control Drive Manual Supplement Supplement to: J1000 Quick Start Guide TOEPC71060626C Type: CIMR-JU A Models: 200 V Class, Three-Phase Input: 0.1 to 5.5 kw 200 V
More informationARTS MANUAL. 70F Fork Clamp. Manual Number R-0. cascade. Cascade is a Registered Trademark of Cascade Corporation
P ARTS MANUAL 0F Fork Clamp Manual Number 89 R-0 cascade Cascade is a Registered Trademark of Cascade Corporation 80-0D-CFS-B About This Manual Introduction This Manual shows the parts breakdown for standard
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationat Spielwarenmesse International Toy Fair 2013 EXHIBITS SPORTS GOODS EXPORT PROMOTION COUNCIL
at Spielwarenmesse International Toy Fair 2013 EXHIBITS SPORTS GOODS EXPORT PROMOTION COUNCIL 29 at Spielwarenmesse International Toy Fair 2013 EXHIBITS 30 SPORTS GOODS EXPORT PROMOTION COUNCIL List of
More information